Reddit reviews Reliable Hardware Company RH-1606-8-A Guitar Amplifier Cabinet

These will do the job. Just put the pointy bits in the holes.

I bought some of these a while back to put on my Pioneer PL-518. Not sure if they will fit on your SL-D2, but if no one else offers a solution I'd give them a try.

Really nice, man. Try these guys on the bottom in each corner. I swear by them.

I used these which might be the most I do for now. Have you finished the enclosure at all? I haven't decided what or how to do it -- doesn't look terrible unfinished, but will eventually want them to look nicer.

Using the same inuke here, have you adjusted the dsp at all? I'm in the middle of figuring out how to use REW with my radioshack SPL meter, hoping to finally play around with it this weekend.

I'm pretty happy with them, for about $900 they complement my Ascend Acoustics CBM-340's nicely. Just need to adjust for the room at this point.

The adhesive for the rubber feet my case came with was garbage, so i bought these. Just used a drill, some screws, and some nuts to attach them to the bottom. Looks good and the case is higher than it was before, so probably has better airflow.

>I replaced the feet with these and I've put felt sliders in it as well.

Very smart.


>I've only use 1" sliders on it but you could go 1.5" to be exact on the feet. But it works, I can slide it around on my hardwood floor by myself. But you need assistance when lifting this. It was troublesome lifiting this to the stairs lol but I survived.

I can only imagine. My Rythmiks are almost half that weight and I was not a happy camper pushing either of them up my staircase by myself.

I replaced the feet with these and I've put felt sliders in it as well.


I've only use 1" sliders on it but you could go 1.5" to be exact on the feet. But it works, I can slide it around on my hardwood floor by myself. But you need assistance when lifting this. It was troublesome lifiting this to the stairs lol but I survived.

OK, this parts list uses the blue and black case that is inverted with a window. You can put the 120 mm NF-A12x25 right under the top filtering mesh blowing onto the graphics card. Or remove the stock fan and put the more powerful Noctua fan at the rear of the case at 1200+ rpm to pull air down through the mesh without it being in plain view. This fan is more pleasant then others at high speed and comes with all needed wires and accessories.

PCPartPicker Part List

Type|Item|Price
:----|:----|:----
CPU | AMD Ryzen 7 3700X 3.6 GHz 8-Core Processor | $439.50 @ Vuugo
Motherboard | ASRock X570M Pro4 Micro ATX AM4 Motherboard | $279.92 @ Vuugo
Memory | *G.Skill Ripjaws V 16 GB (2 x 8 GB) DDR4-3600 Memory | $104.99 @ Newegg Canada
Storage | *Crucial MX500 1 TB 2.5" Solid State Drive | $129.99 @ Newegg Canada
Video Card | *ASRock Radeon RX 5700 8 GB Video Card | $447.50 @ Vuugo
Case | BitFenix Prodigy M Cobalt Blue MicroATX Mini Tower Case | $89.88 @ Amazon Canada
Power Supply | *Corsair TXM Gold 550 W 80+ Gold Certified Semi-modular ATX Power Supply | $99.99 @ Amazon Canada
Case Fan | Noctua NF-A12x25 PWM 60.1 CFM 120 mm Fan | $37.90 @ Amazon Canada
Monitor | *Acer XZ321QU bmijpphzx 31.5" 2560x1440 144 Hz Monitor | $568.50 @ Amazon Canada
| Prices include shipping, taxes, rebates, and discounts |
| Total (before BS PITA MIR) | $2253.17
| Mail-in rebates | -$55.00
| Total | $2198.17
| | *Lowest price parts chosen from parametric criteria |

If you do not want to push the budget to the max, I would first cut the processor from the R7 3700X to the R5 3600 ($2025). Then I would cut the graphics card two levels to the RX580 8GB, then add 3 TB of storage, and a Windows 10 stamp ($2050, see below). Then you will want to play on 1440p medium presets with high textures. FreeSync on the monitor and graphics card should make that a smooth and low-latency experience.

PCPartPicker Part List

Type|Item|Price
:----|:----|:----
CPU | AMD Ryzen 5 3600 3.6 GHz 6-Core Processor | $265.50 @ Vuugo
Motherboard | ASRock X570M Pro4 Micro ATX AM4 Motherboard | $279.92 @ Vuugo
Memory | *G.Skill Ripjaws V 16 GB (2 x 8 GB) DDR4-3600 Memory | $104.99 @ Newegg Canada
Storage | *Crucial MX500 1 TB 2.5" Solid State Drive | $129.99 @ Newegg Canada
Storage | *Seagate Barracuda 3 TB 3.5" 7200RPM Internal Hard Drive | $94.99 @ Newegg Canada
Video Card | *ASRock Radeon RX 580 8 GB Phantom Gaming D Video Card | $256.41 @ Vuugo
Case | BitFenix Prodigy M Cobalt Blue MicroATX Mini Tower Case | $89.88 @ Amazon Canada
Power Supply | *Corsair TXM Gold 550 W 80+ Gold Certified Semi-modular ATX Power Supply | $99.99 @ Amazon Canada
Operating System | *Microsoft Windows 10 Home OEM 64-bit | $134.94 @ shopRBC
Monitor | *Acer XZ321QU bmijpphzx 31.5" 2560x1440 144 Hz Monitor | $568.50 @ Amazon Canada
| Prices include shipping, taxes, rebates, and discounts |
| Total | (before BS PITA 50/50 flip) | $2050.11
| | Mail-in rebates | -$25.00
| Total | $2025.11
| | *Lowest price parts chosen from parametric criteria |


If you don't like the big handles on the Prodigy M case, they can be removed if you buy some appliance feet for the bottom. The compact case has the power supply exhaust on the bottom, and it needs clearance from the floor/desk. The graphics card is at the top of this case, so you can see the graphics card through the mesh and the window. It is also really blue.

https://www.amazon.com/Reliable-Hardware-Company-RH-1606-8-Amplifier/dp/B00JJ191Z6/

Cheap

or,

Still pretty cheap, but shiny