Reddit Reddit reviews RepRap Champion Aluminum Y Carriage Plate Upgrade V2 for Prusa i3 Style 3D Printers (NOT Compatible with Anet A8 or MP Maker Select)

We found 5 Reddit comments about RepRap Champion Aluminum Y Carriage Plate Upgrade V2 for Prusa i3 Style 3D Printers (NOT Compatible with Anet A8 or MP Maker Select). Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Science Education Supplies
RepRap Champion Aluminum Y Carriage Plate Upgrade V2 for Prusa i3 Style 3D Printers (NOT Compatible with Anet A8 or MP Maker Select)
馃挄 High cost-effective FDM 3D printer kit, including 3D printers, CD cards, printing supplies, USB data cables, power cords, tool kits, hanging posts, user guides, etc.馃挄 The building size is 225 * 145 * 150mm.The large size of the plate and vertical spacing means that you can print larger and more complex models.Working with ABS / PLA filaments, the material is more environmentally friendly.馃挄 With LCD screen, 5 buttons, easy to operate. Equipped with a high-quality double extruder, the speed is stable, the power is even, the highest printing speed is up to 100mm/sec, the precision is higher, and the printing quality is higher.馃挄 The 3D printer and the computer are connected via a USB cable for online printing or offline printing via an SD card. As long as you have 3D files in STL format, you can complete the printing of various complex 3D solid models.(Use Cura software)馃挄 3D printers have been able to print a lot of things, have a very big impact on the medical, cultural, construction, food, automotive and other industries, and his extensive.
Check price on Amazon

5 Reddit comments about RepRap Champion Aluminum Y Carriage Plate Upgrade V2 for Prusa i3 Style 3D Printers (NOT Compatible with Anet A8 or MP Maker Select):

u/sshwifty 路 4 pointsr/3Dprinting

For the love of all things 3D printed, don't tighten any nuts or screws until the guide says. It is poorly designed in that regard. Also take care aligning up the Y-axis rods to be parallel , just a few degrees off will cause jerking and squeaking because the bearings are tighter at one end. Also be careful with the X-axis belt, it can start rubbing if not aligned very close with the motor, head, and holder.

After assembling my own about a month ago, I highly recommend the following upgrades:

  • Vibration damper feet. (This cuts the noise by 90%)

  • Printed linear bearings (the bearings shipped started making grooves in the rods in about a week. You can also print the bearing holder, I made my own which I might upload sometime.)

  • A new carriage plate, like this one (not a super urgent upgrade, but it fixed most leveling problems, and the plastic one Prusa sent was warping.

  • Y-belt holder and tensioner (This has saved me a lot of annoyance. I am probably going to mod it so the screw presses against a wedge and not the large screw. I used M3 screws, just resized the holes.)

  • X-Belt tensioner (Have not made this, but it is on the to-do list).

  • Spool holder (This one is super nice)

  • Filament guide (Might want to change the angle a bit if used with the spool holder, but it works without any mods.)

    I am considering a cable chain as the cables are starting to shift after just a few weeks of printing.

    There are also a few mods to adapt the side fan port to handle a 40 mm fan that is quieter. I am making an adapter for a different fan as I type this, results TBD.

    I found this site handy as a quick reference for bed leveling. The info is in the guide too.

    Best of luck!
u/dmezh 路 2 pointsr/3Dprinting

Nope, it's not your fault. The bottom carriage is warped, not the bed. You'll need to buy:

https://www.amazon.com/RepRap-Champion-Anodized-Aluminum-Carriage/dp/B01FV17EL0

and bolt the old carriage to the new one using the holes on 4 corners (they are spaced the same on both). Then drill the proper holes in the newer, thicker plate using the old plate as a template. Separate the two plates and put the new one in. While you're at it, you may want to replace the bearings.

u/ThatOnePerson 路 2 pointsr/3Dprinting

You can replace it if that doesn't work out. I've been tempted to get this to try 3 point bed leveling. I'd also be worried about the state of your smooth rods.

Edit: turns out the size is different

u/hamlet_d 路 1 pointr/DnDIY

That is exactly what I have. So the Prusa i3 is "open source", anyone can make one. These guys did a good DIY kit with some helpful videos. The one upgrade I made that made all the difference in the world was:

https://www.amazon.com/gp/product/B01FV17EL0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

The acrylic carriage was way too flexible. Using this instead took care of 90% of my frustrations leveling the print bed.

u/dtphantom 路 1 pointr/3Dprinting

I'm confused as to what you're asking here.

You've identified the source of your problem, the y-axis carriage plate is bent. No amount of sticking washers over/under the build plate is going to fix that, you just need to replace the carriage. The leveling issue is going to keep getting worse since the aluminum is already bent it will just keep bending as you apply more and more force to try and level it.

Buy one of these, use the old carriage plate as a template to drill new holes and then mount it. Or if you don't want to drill new holes you'll have to print adapters that will let the new plate use the y-axis rails. These are a good starting point but you'll have to either move the y-axis limit switch or modify one of them so it still work, plus you'll need a new timing belt mount. If that's the route you want to go, let me know I have already designed all the modifications and can give you the files that I used to fix my printer.