Reddit reviews Rok Hardware 4 Pack Heavy Duty 8000 LB Capacity Adjustable Furniture Leg Leveler
We found 9 Reddit comments about Rok Hardware 4 Pack Heavy Duty 8000 LB Capacity Adjustable Furniture Leg Leveler. Here are the top ones, ranked by their Reddit score.
Holds Up to 8000 Lbs Made of heavy duty steel with a 2000 Lb capacity Per leg levelerIncludes allen key for height adjustment. And #10 x 3/4" high strength installation screws.Leg Base Diameter: 1-1/4" | Leveler Total Height: 2-1/2"Leveler Pin Length: 3 InchesRok Brand is sold exclusively by Rok Hardware. When you purchase a Rok Brand product, your satisfaction is guaranteed. The Rok name is a registered trademark of Rok, Inc
Rok Hardware 4 Pack Heavy Duty 8000 LB Capacity Adjustable Furniture Leg Leveler https://www.amazon.com/dp/B01N4BUE1P/ref=cm_sw_r_cp_api_i_gsCACbY99EXWS
For any of your metal tools, coat them in a layer of oil to protect them from the moisture. Just spray some wd-40 into a shop rag and wipe them down with it if you don't have anything fancier. Old tools with some rust can mostly be recovered with persistence, but you want to keep them from getting worse. New tools you'll want to oil as well, and keep in a toolbox or similar.
I just bought these levelers with the plan of using them with my workbench to both get a level surface and to keep the posts off the ground. Getting the wood off the floor will definitely help slow any rot. You could also try weatherproofing/sealing the lower part of the legs on your bench, but it may be too late for the existing legs.
If you're going to be storing boards and other wood stock in the garage, I'd definitely suggest at least a canopy cover for your stack, given how leaky the garage sounds.
Is the door with the gaps the overhead garage door, or a regular swing door to the outside? If it's a swing door, you could replace both the door and frame somewhat easily and all your gaps would go away. Harder than replacing a broken piece of glass in a window, but easier than replacing an entire window frame.
Personally, I'd just grab a set of leveling legs.
They make rubberized feet that'll fit on a 4x4 table leg. I think my father grabbed these at a local wood working store, but I bet Home Depot or Lowes would offer something.
Pic of my table showing what I'm talking about.
https://www.flickr.com/gp/64462769@N06/jCrn97
​
Or you could grab a heavy duty leveler... but it may not look as nice since it'll be visible.
https://www.amazon.com/Rok-Hardware-Capacity-Adjustable-Furniture/dp/B01N4BUE1P/ref=pd_lpo_vtph_60_bs_img_1?_encoding=UTF8&psc=1&refRID=BKJ2ZYVMXNJSNRCRKW4J
​
So could i use something like this for the legs to help level?
4 pack of 2000 Lb. Capacity Heavy Duty Leg Levelers
There are plenty of heavy-duty leveling feet. E.g. these ones claim to support 2000 lbs per foot.
If you're worried about catching you could bevel the leading edge slightly.
You could try a version with a side mount bracket...but not as clean looking.
Good luck and thank you :)
I’ve been considering building a workbench with https://www.amazon.com/Rok-Hardware-Capacity-Adjustable-Furniture/dp/B01N4BUE1P and https://www.amazon.com/SPACECARE-Swivel-Caster-Polyurethane-Bearing/dp/B07K2S25D3