Reddit Reddit reviews Rosewill Tool Kit RTK-045 Computer Tool Kits for Network & PC Repair Kits with Plier Hex Key bits ESD Strap Phillips Screwdriver bits & Socket Sets

We found 10 Reddit comments about Rosewill Tool Kit RTK-045 Computer Tool Kits for Network & PC Repair Kits with Plier Hex Key bits ESD Strap Phillips Screwdriver bits & Socket Sets. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hand Tools
Multitools & Accessories
Multitools
Power & Hand Tools
Rosewill Tool Kit RTK-045 Computer Tool Kits for Network & PC Repair Kits with Plier Hex Key bits ESD Strap Phillips Screwdriver bits & Socket Sets
The 45-piece premium computer tool kit is designed with the most popular tools needed to fix and upgrade electronic devicesAll tools are demagnetized to prevent systems and Magnetic media from damageReversible 1/8" & #0 Mini screwdriver (with pocket chip)
Check price on Amazon

10 Reddit comments about Rosewill Tool Kit RTK-045 Computer Tool Kits for Network & PC Repair Kits with Plier Hex Key bits ESD Strap Phillips Screwdriver bits & Socket Sets:

u/Flightless_Ferret · 4 pointsr/AskMen

I'm just going to throw out a list or two here and you can skim it:

  • Full socket wrench set
  • PC tools (whether you're into pc repairs or not, they offer many nifty little tools you often use elsewhere)
  • Drill'n'bits
  • Long screwdriver (flat head/Phillips)
  • A fucking magnitizer/demagnitizer (you'll wonder how you lived without one)
  • Hammer / nails


    Not needed, but fun as hell:

  • Wattage meter for outlets (only need one) "What the hell is causing this high electric bill?"
  • Infrared thermometer "I bet that frying pan is cool by now..."

    Oh edit - not tools, but useful in said tool kit:

  • Many types of tape electrical, two sided, painters, etc
  • Super glue
  • Batteries (at least AA, AAA - you'll thank me when the power is out next)
  • A good flashlight (or 3)
  • An LED work light bar thing
  • A head lamp
u/Pollux10 · 4 pointsr/washingtondc

Nice, should be reasonably straight forward. I saw that you were worried about the CPU--that part is intimidating but also not as bad as it seems. There is plenty of space around the edge to hold on without touching the pins. Just look the chip and the motherboard over carefully before you pick them up to see how to align the chip--there's a notch in the corner to make sure it fits right.

Do you have any tools and a static strap? You'll probably need a small screwdriver, and the static strap gave me peace of mind, though you don't necessarily need it.

I got a tool set like this, and it was super useful to have everything I needed in one place. The best item was the little part grabber for when you inevitably drop a screw somewhere in the case or on another board. I think one of the tools is also to help you hold the cpu while you install it. The $22 version has a static strap plus some other tools, or you can buy the static strap separately.

Edit: Realized something later--straight forward doesn't mean error or mistake free! Take it slow, and if something isn't working, back up a few steps and figure out what went wrong. Worst case, pull it all apart and start over! Don't want you thinking you're bad at this after everyone said how "easy" it is when you realize at the very end you put something in upside down or missed some screw. Everyone does that!

u/Starlos · 3 pointsr/pcmasterrace

Can you tell me more about that legendary kit? Is it like that? https://www.amazon.com/Rosewill-RTK-045-Computer-Phillips-Screwdriver/dp/B0045KYOGM

u/4LTRU15T1CD3M1G0D · 2 pointsr/tf2

No problem!

I'm in the same boat man. I've been fucked by the DMV for 2 years now so I still don't have a license, and I'm 20. I'm pretty jealous of people that have the coordination to play instruments!

I understand the money struggle as well. I live on a dead-end island where all jobs are seasonal, so during winter jobs are scarce.

If you are scared about frying parts, you may want to look into getting an ESD mat, an ESD wrist strap, and a proper PC repair toolkit. Just some things every PC builder/user should have in their arsenal. Just follow proper procedure and ground/discharge yourself before working on parts and you'll be fine.

u/Symbolis · 2 pointsr/buildapc

Perhaps a DataVac?(Note: It doesn't suck, it blows!)

Maybe a tool kit?

Wacom bamboo or similar?

Edit - Maybe something off Vat19?

u/ilikesleep · 2 pointsr/Random_Acts_Of_Amazon
  1. One thing

  2. I want an early present!

    Try not to celebrate a little too much with liquid courage ;)
u/1337ken · 1 pointr/pcmasterrace

Not quite as comprehensive as the tool kit you listed but I use this:

http://www.amazon.com/gp/aw/d/B0045KYOGM/ref=mp_s_a_1_1?qid=1463523345&sr=8-1&pi=SX200_QL40&keywords=rosewill+45+piece&dpPl=1&dpID=515tbNl4TDL&ref=plSrch

Probably wouldn't help with smartphones but it has been a godsend for working on computers.

(Edit) I just noticed they also have a 90 piece set and 143 piece set which may work for you, and the quality of the tools is really good.

u/Ask_Seek_Knock · 1 pointr/Random_Acts_Of_Amazon

Air $26.09 and Toolkit $19.99 both are on Miscellaneous wish list. Also something from her Little wishes list, Kitty Treats $2.99 add-on

u/mrmatthunt · 1 pointr/pcmasterrace

Yup, with those you set the direction of the torque and you can twist your hand really fast back and forth to loosen or tighten the screw, instead having to take your hand off the handle.

EDIT: Spend a little more and get this, lots of handy tools in there.

http://www.amazon.com/Rosewill-Piece-Premium-Computer-RTK-045/dp/B0045KYOGM/ref=sr_1_1?ie=UTF8&qid=1451686156&sr=8-1&keywords=rosewill+tool+kit

u/barshat · 1 pointr/buildapc

I have one of these and it was a good purchase. https://www.amazon.com/dp/B0045KYOGM/