Reddit reviews Rubber Sheets, Black, 6x6-Inch by 1/16 (Pack of 3) Neoprene, Plumbing, Gaskets DIY Material, Supports, Leveling, Sealing, Bumpers, Protection, Abrasion, Flooring
We found 4 Reddit comments about Rubber Sheets, Black, 6x6-Inch by 1/16 (Pack of 3) Neoprene, Plumbing, Gaskets DIY Material, Supports, Leveling, Sealing, Bumpers, Protection, Abrasion, Flooring. Here are the top ones, ranked by their Reddit score.
★ 3 RUBBER SHEETS - Includes 3 black sheets of rubber 6 in x 6 in by 1/16 in.★ DO IT YOURSELF (DIY) MATERIAL - This product is great for your home and workplace projects. Cut it easily with a knife or scissors.★ HEAVY DUTY/HIGH-QUALITY RUBBER MATERIAL - This rubber was dried using a special process that will help retain it's natural properties, reduce environmental toxic gasses (vs. drying with carbon burning).★ POSSIBLE APPLICATIONS - Use the Rubber Sheet for projects like gasket creation, vibration reduction, water insulation, leveling objects, abrasion, floor cushioning, hammering protection, electric insulation, sound reduction...★ MATERIAL - Neoprene , Rubber , Chloroprene.
I bought some black rubber sheets from Amazon, something like this https://www.amazon.com/6x6-Inch-Neoprene-Plumbing-Material-Protection/dp/B018H9CCPG/ref=sr_1_2?ie=UTF8&qid=1482726076&sr=8-2&keywords=black+rubber+sheet.
Cut the sheets down via exacto knife or box cutter. Two strips of 5mm x ~8.0 or ~8.5cm(this part can be adjusted).
I used Gorilla glue to glue them down, specifically the gel kind. I started near the top and then worked my down towards the curved edges on the bottom.
The end result looks like this: http://imgur.com/a/PSneJ
I loved the grip prior to doing this but the wobble drove me crazy, hope this helps. You can find the sheets in stores like Home Depot as well in the plumbing section but may not be black or as cheap.
boy that's really something. these are the same type of "kits" you'd find at a local hardware store. i just ordered a kit with m3-m4-m5 nuts bolts and washers, then another kit with m3-m4-m5 hammer nuts! plus, i got some rubber sheets in case i want to use them to cut to size for things like the stock part cooling fan, the y-axis brace where it touches the frame, and even the new squash ball feet i just mounted this morning! i'm not sure if the lengths all match up to what i want, but i suppose i could just find some longer/shorter if need be.
https://www.amazon.com/gp/product/B018H9CCPG
https://www.amazon.com/gp/product/B0799KSXN9
https://www.amazon.com/gp/product/B077Z94V83
You can try to cut some rubber pieces to place between the bracket and case to provide vibration isolation. Pretty cheap to get a small sheet on amazon and give a try.
It's literally raw balsa wood.
https://www.amazon.com/6x6-Inch-Neoprene-Plumbing-Material-Protection/dp/B018H9CCPG/ref=pd_sbs_60_1?_encoding=UTF8&pd_rd_i=B018H9CCPG&pd_rd_r=457NFRVKE0ZY1WA2ZHW5&pd_rd_w=ehRBM&pd_rd_wg=UNP8G&psc=1&refRID=457NFRVKE0ZY1WA2ZHW5&dpID=316g3BYm-AL&preST=_SX300_QL70_&dpSrc=detail
That's the rubber sheets I use. I cut it into little pads that rest along the lid. It's really nothing fancy and looks pretty ratchet. I would post pics but I am out of the country for a few months.
The reason I use balsa wood is it's light and cheap. I used to use sheets but I didn't like the weight they put on knobs, sliders, etc.