Reddit reviews Scotch Mounting, Fastening & Surface Protection RFD7091 Interlocking Fasteners Strips, 4, Black, 2 count
We found 19 Reddit comments about Scotch Mounting, Fastening & Surface Protection RFD7091 Interlocking Fasteners Strips, 4, Black, 2 count. Here are the top ones, ranked by their Reddit score.
Delivers a powerful bond on contactHolds up to 10 lbs. (1 set holds 2 lbs)Lasts up to 1000 closuresWeather, dirt and UV resistantEasy-to-apply design with no mess or toolsIdeal for use on varnished/sealed surfaces, wood, bare metal, drywall, plastic and moreIntended for indoor and outdoor useEnsure your surface is clean and dry for the best bondMade in the USA from domestic and globally-sourced materialSize: 1 inch x 3 inch
get some double sided fasteners :/
http://www.amazon.com/Scotch-Heavy-Duty-Fasteners-Inches-RFD7091/dp/B00347A8GM/ref=sr_1_3?s=office-products&ie=UTF8&qid=1427065456&sr=1-3&keywords=3M+fastener
I just bought the official wireless charger from google, and then attached it to my car using very heavy duty velcro. Then, since my car doesnt have bluetooth, I bought one of these and attached it using a spare bit of the heavy duty velcro. All that was left to be done at that point was attach an NFC tag in my car, and program it so that it would turn off wifi, turn on data, and toggle on bluetooth on / off and connect to the receiver, and then connecting to the receiver would trigger it to open GPM and start playing the music
Wow, I'm jealous of ethernet in each room. Nicely done.
If you already have a switch buy 3 to 5 Unifi AC-Lite APs. If you dont have a switch get a Unifi POE switch & their 5 pack of AC-Lites. As the 5 pack doesn't include the POE injectors.
Once you have the APs tape to walls / ceiling with gaffer tape (like duct tape but less residue) to sort out ideal placement & eliminate dead spots. Then once placement is sorted use Scotch fasteners or screw the base plate to drywall / bookcase.
SCOTCH Fasteners Extremely Strong Holds 10lb, 4.5Kg https://www.amazon.com/dp/B00347A8GM/ref=cm_sw_r_other_apa_bwIWBbZ63W8K5
Unless you plan on touching that dock once in awhile, you should get some 3M based velcro strips and mount it under the desk since it looks like you value minimalism.
https://www.amazon.com/SCOTCH-Fasteners-Extremely-Strong-Holds/dp/B00347A8GM
I just copied the YouTube dude's parts list and bought them from Amazon. The USB light has several levels of brightness so that's a bonus.
I added an extra Magic Tape at the back before adding the Fastener in case the Fastener leaves a mess when I decide to remove it
I use this - 3M Dual Lock Plastic Velcro along with a typical normal Velcro strap. That battery will not move, I promise. The 3M is incredibly strong for front to back movement and they regular strap also helps prevent it from lifting up.
I've had the battery eject from my quad ONCE, but that's only because it ripped the shrink wrap off of the battery pack! The 3M held it in place lol the shrink wrap was still attached to the quad.
Battery Pic - http://imgur.com/jVvQyWX
I went from Gen 5 to 6, get these with some velcro. Stick next to your right knee on the transmission tunnel for a good cell phone holder.
If you need a front plate, ZL1 Addons makes a great one I can vouch for.
I was going to say get some 3m velcro. Just don't put it on stickers.
http://www.amazon.com/Scotch-Heavy-Duty-Fasteners-Inches-RFD7091/dp/B00347A8GM/ref=sr_1_2?ie=UTF8&qid=1450881554&sr=8-2&keywords=3m+heavy+duty+velcro There ya go OP.
Ah, I didn't make that connection. Just hang it instead? Or if you don't need perfect positioning, these are strong enough even with possible cable tension and don't wear out like velcro.
I immediately took the stock tape off because I knew it wouldn't hold up well. I also wanted the ability to remove the entire mount whenever I wanted so I used this 3M heavy duty fasteners instead. It's like velcro except that it uses thick plastic prongs rather than fibers to bind itself together. It also has better adhesive on the backing. I've hit my AP countless times with my knee, accidentally yanked on the cord, as well as taken high G force corners and it has never ever fallen off. I've had it mounted like this for almost a year.
Non-mobile: 3M Dual Lock Plastic Velcro
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
Velcro and tether, baby
https://imgur.com/a/qKpPy
https://www.amazon.com/Scotch-Heavy-Duty-Fasteners-Inches-RFD7091/dp/B00347A8GM/ref=sr_1_4?ie=UTF8&qid=1520960332&sr=8-4&keywords=3m+scotch+heavy+duty+fasteners
https://www.amazon.com/gp/product/B00JFS1TC6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Don't nail
Clean/sand the area and then use a heavy duty velcro to cover the entire area you are trying to hold (not just a single strip)
https://www.amazon.com/Scotch-Heavy-Duty-Fasteners-Inches-RFD7091/dp/B00347A8GM
One of the best things I bought along with the CH was a set of velcro fasteners: https://www.amazon.com/Scotch-Heavy-Duty-Fasteners-Inches-RFD7091/dp/B00347A8GM/ref=sr_1_2?ie=UTF8&qid=1497634206&sr=8-2&keywords=3m+velcro+strips
They'll make the CH feel twice as solid.
Scotch(R) Heavy-Duty Fasteners, 2 Sets of 1 x 3 Inches, Strips ,Black (RFD7091) https://www.amazon.com/dp/B00347A8GM/ref=cm_sw_r_cp_api_Gd90AbHHJ859H
Is this it?
I was thinking to use these
Scotch(R) Heavy-Duty Fasteners, 2 Sets of 1 x 3 Inches, Strips ,Black (RFD7091) https://www.amazon.com/dp/B00347A8GM/ref=cm_sw_r_cp_api_iG22xbGPR59SP
I use them them to mount everything in my house. You can stick one on the back of the base station mount and one on the wall. These things are quite strong as well so they could definitely handle the weight of the base stations.
I guess? (Not really sure) It hasn't popped off on me at all, very secure.
Scotch(R) Heavy-Duty Fasteners, 2 Sets of 1 x 3 Inches, Strips ,Black (RFD7091) https://www.amazon.com/dp/B00347A8GM/ref=cm_sw_r_cp_apa_qD66xbBKF40R4
http://imgur.com/CvSGXzO
http://imgur.com/NQiV9iz
The inside is a rat's nest that I need to fix, and I'd like to add a volume control, but it's basically a finished product. I mounted the battery and amp using 3M adhesive Dual Lock, which is great stuff (Its way better than velcro because it locks into place, whereas with velcro your component will start leaning away from the mounting surface), and way better than screws because I can remove the components quickly if need be for a quick fix. One addition I'm contemplating making is adding Dynamat, which I think might help a lot considering it's just a cheap plastic cooler instead of a real speaker box. Oh, and one other thing I need to add is something on the exterior to hold a phone/mp3 player.
I have heard many good things about using that for HOTAS. I would recommend using this to secure it. I am pretty sure that the extreme pro will work with that