Reddit Reddit reviews Screwdriver and Nut Driver 11-in-1 Multi Tool, Industrial Strength Bits, Cushion Grip Handle Klein Tools 32500

We found 24 Reddit comments about Screwdriver and Nut Driver 11-in-1 Multi Tool, Industrial Strength Bits, Cushion Grip Handle Klein Tools 32500. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hand Tools
Screwdrivers
Power & Hand Tools
Screwdrivers & Nut Drivers
Screwdriver and Nut Driver 11-in-1 Multi Tool, Industrial Strength Bits, Cushion Grip Handle Klein Tools 32500
Integrated screwdriver and nut driver shaft holds 8 popular tips and converts to 3 nut driver sizesIncludes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recessInterchangeable blade for fast and easy switch out; comfortable Cushion-Grip handleBlast finish bit tips provide a firm hold and reduce cam-out; Search Cat. No. 32526 for a full set of replacement bitsThe following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)TORX is a registered trademark of Acument Intellectual Properties, LLCAssembled in USA of US and imported components
Check price on Amazon

24 Reddit comments about Screwdriver and Nut Driver 11-in-1 Multi Tool, Industrial Strength Bits, Cushion Grip Handle Klein Tools 32500:

u/E-werd · 9 pointsr/sysadmin

The Klein 11-in-1 Screwdriver is an amazing companion. The torx bit is perfect for the screws in HP desktops and the phillips bits have good bite.

Otherwise, you pretty much have that I would carry myself. I would add what /u/bitbucket87 mentioned for sure.

u/m46uec5vibt7nyuhfaw4 · 4 pointsr/techtheatre

Set wear hot hands are the best insulated work gloves I've ever used. You can hold something 400 degrees for a good 10-15 seconds before you start to feel the heat. It's a real leather too, which lasts longer.

If you're going to the UFT you might as well go for the full ratcheting version rather than ape ding that money twice. Personally I don't care for the UFT I use a Gator Grip socket on a short handled rachet with a swiveling head. Then I also carry a Mega Combo Wrench from The Light Source on my keyring.

Most screw drivers you find won't have a tether hole, I assume because you use them in a circular motion. For an all purpose carry look for a XX in 1, that has multiple bits all in one screwdriver. https://www.amazon.com/dp/B0015SBILG/ref=cm_sw_r_other_apa_i_JsPOCbM5B9DK8 something like this.

Is also recommend looking at multi tools, I use a Gerber Center Drive because it has a bit driver to use real screw bits and I like it a lot.

Another good gift idea are flashlights. I'm always on the lookout for the next great flashlight.

u/We-Want-The-Umph · 4 pointsr/Tools

Screwdriver and Nut Driver 11-in-1 Multi Tool, Industrial Strength Bits, Cushion Grip Handle Klein Tools 32500 https://www.amazon.com/dp/B0015SBILG/ref=cm_sw_r_cp_apa_S.9XBbS1RP5HN

At half the price, they are most definitely worth it!

u/Munnjo · 3 pointsr/Tools

Not sure about that one in particular but my friend has one of these and swears by it:

http://www.amazon.com/Klein-32500-Screwdriver-Driver-Cushion/dp/B0015SBILG/ref=sr_1_1?ie=UTF8&qid=1427291911&sr=8-1&keywords=klein+screwdriver

It's a pretty neat design and is quick to switch the drivers. It's also a Klein so it should be high quality.

u/[deleted] · 3 pointsr/DIY
u/GenoOfMemphis · 3 pointsr/electricians

Klein Tools 92906 ProPack 6 Apprentice Tool Set for Trade Professionals (6-Piece) https://www.amazon.com/dp/B004EKONLY/ref=cm_sw_r_cp_api_Qm5EAbQVA3JFH

That’s a good deal. It has lineman pliers, diagonal cutters, needle nose, wire strippers, and flat/ Phillips screwdrivers.

Screwdriver and Nut Driver 11-in-1 Multi Tool, Cushion Grip Handle, Industrial Strength Bits Klein Tools 32500 https://www.amazon.com/dp/B0015SBILG/ref=cm_sw_r_cp_api_yp5EAbSKE4D2A

This is a good all purpose screwdriver to carry around

Klein Tools NCVT-2 Dual Range Non-Contact Voltage Tester https://www.amazon.com/dp/B004FXJOQO/ref=cm_sw_r_cp_api_qq5EAbTTZ8GYW

This is a non contact voltage tester and it might just save you some pain/your life

Channellock 440 12-Inch Tongue and Groove Plier https://www.amazon.com/dp/B00004SBCU/ref=cm_sw_r_cp_api_xr5EAbWNKDP5C

You should probably get 2 pairs of these. It’ll help you twist on couplings and stuff

Stanley 33-725 25-Feet FatMax Tape Measure https://www.amazon.com/dp/B00002PV66/ref=cm_sw_r_cp_api_Xs5EAbGVWXZDV

A lot of people like these tape measures for their larger claws

Klein Tools 98002BT Bottle Opener https://www.amazon.com/dp/B00093GENU/ref=cm_sw_r_cp_api_4u5EAb52FZ742

This will help for when you go home


u/Bortjort · 2 pointsr/cars

Get good wrenches, socket wrenches and sockets because these are what you will be using the vast majority of the time. Make sure you get a set of short AND deep sockets too. I might honestly get deep socket first if you have to pick. Also get a 3/4" torque wrench and don't get the harbor freight ones of those. Amazon has good options here. If you spent all of your money on the above items and then added other stuff later you'd be well served. Buying a big kit seems attractive but really putting your money where you will use it the most is a better long term plan. Gearwrench makes good ratcheting wrenches for the price if you want that, but if you aren't willing to spend at least that on wrenches amount get non-ratcheting wrenches instead. Also this thing is one of the handiest tools I own. It's very well built and a very clever design.

Harbor freight does make some OK stuff but it's better to buy less critical things there. I have a set of allen wrenches that have been fine, and their impact sockets are actually pretty good, but you probably won't have an impact for awhile (which is good tbh).

u/The_Tic-Tac_Kid · 2 pointsr/CFBOffTopic
u/tim404 · 2 pointsr/DIY

A Klein 11-in-1. I use this more than any other tool. It's fantastic.

u/lelsunshine · 2 pointsr/electricians

Linesman

I have both of these Klein diagonal cutters
Angled
Straight

Needle Nose

11 in 1

Strippers

Too lazy to do the rest but I’m sure you could figure it out lol

u/the_wolfOF_suburbia · 2 pointsr/HomeImprovement

Buy this screwdriver immediately. A friend of mine gave me one when I bought my house and I use it religiously. Especially when it is something small like this and I don't feel like getting out my drill and drill bits. It is by far my favorite and most used tool as a home owner.

​

https://www.amazon.com/Screwdriver-Industrial-Klein-Tools-32500/dp/B0015SBILG/ref=sr_1_1_sspa?ie=UTF8&qid=1536541144&sr=8-1-spons&keywords=klein+6+in+1+screwdriver&psc=1

u/itsmejaypee21 · 2 pointsr/msp

This guy is in all of my bags. I also carry a North Face Surge 2, it's pretty solid, has a lot of pockets, the laptop pouch is lined so my device never gets scratched up. I have some velcro cable ties that have been very useful at times, but I also go into a lot of rack rooms still.

I agree with the comfy shoes, and I also carry some hand sani and wipes.

u/joshlove · 1 pointr/sysadmin

When I was a field tech, mostly working with structured cabling and networking equipment I took the following along with me, some of these things are no longer needed with VOIP phones though:

u/crawsome · 1 pointr/BuyItForLife

Ran my own PC business for a couple of years.

Craftsman Mini Shop Vac. Make sure it blows and sucks. Put it in the corner of your workshop, extend the tube to your current project and kick the switch.

Screwdrivers: Klein 11 in 1 all the way.

Multitool: SOG Powerlock

u/ironmayne · 1 pointr/sysadmin
u/tetonpassboarder · 1 pointr/snowboarding
u/Tattertott · 1 pointr/techtheatre

I keep one of these in my kit, my friend has a picquic and it's nice however I find if I'm working on something that requires me to switch bits back and forth the Klein is better.
Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip https://www.amazon.com/dp/B0015SBILG/ref=cm_sw_r_cp_awd_TSy5wbW1531PA

u/RocketTech99 · 1 pointr/sysadmin

You get what you pay for. I wouldn't touch a $40 cable tester, much less a tool kit.
You can spend money wisely, like buying a Klein 10-in-1 or 11-in-1 for PSTN/POTS outside work.
For precision drivers, Wiha is what you want- this is a nice portable set which works on the bench as well.
For crimpers I currently use an Ideal Telemaster but will be switching to an Amp. For cable testing I use a Fluke Cable IQ or LinkRunner.
Your tools need to be better quality that the amateurs that banged on it before you. You definitely don't want crappy tools to be holding you back.
If you are worried about theft, sign the tools out to individual techs and make them responsible for them. Part of the sign-out process should be an authorization to withhold the replacement cost from their paycheck if they lose anything.

u/sk0pe_csgo · 1 pointr/electricians

Are you open to suggestions?

If you haven't already ripped the packaging off of it, my personal recommendation is to not use the Klein non-contact voltage tester (ticker). My experience with it was not good. It was unreliable and the on/off button is junk so the damn thing would never turn off, then it would sit and beep at me constantly while it was in my tool pouch. I finally got rid of it and bought the Santronics ticker. Easily one of the best purchases I've made as an electrician. It's always on, silent, and extremely reliable.

Also, for your hammer I would recommend one with a longer head on it like this one. The reason for this is because you will be doing a lot of work with deep 1900 boxes and 11bs (don't worry if you don't know what those are yet, you will find out soon) and if you're using fasteners that require pounding in with a hammer, you will need a different hammer than the one you have. If you're doing residential work and need to pound staples inbetween studs, you can just use the side of your hammer.

You can probably just return those gloves. You will (or should) be provided with work gloves (many, many pairs of them) at every jobsite you ever work at. You'll never have to buy another pair of work gloves in your life, I can promise you that.

As others have said, get the Klein multi-tool. The 32500 model is the one I use, along with some other commenters in this thread. They are cheap, you'll probably lose the tips every now and then, but it will easily be your most used tool, especially if you're doing a lot of devicing.

Another personal recommendation of mine would be the Ideal Tool Backpack for hauling your stuff around. Sometimes there's a lot of walking involved in getting to and from jobsites, and being able to carry your tools on your back is a lot nicer than carrying them in your hands. It's also nice having your hands free for carrying your lunch box around!

Congratulations on getting in! Keep up a good attitude and you'll do fine. Don't let anyone get on your nerves. 8 hours is 8 hours, make the best of it at all times.