Reddit Reddit reviews Sensative Z-Wave Plus Ultra Thin Door/Window Contact Sensor Strips Guard, Good for Outdoor Installation

We found 13 Reddit comments about Sensative Z-Wave Plus Ultra Thin Door/Window Contact Sensor Strips Guard, Good for Outdoor Installation. Here are the top ones, ranked by their Reddit score.

Electronics
Security & Surveillance Equipment
Sensative Z-Wave Plus Ultra Thin Door/Window Contact Sensor Strips Guard, Good for Outdoor Installation
RELIABLE OPEN/CLOSE REPORTS: Monitor doors, windows, gates, and cabinets from your smart home app when you're away. Get text and email notifications whenever the sensor is triggered. Compatible Z-Wave hub required, sold separately. Works with SmartThings, Vera, Fibaro, Wink, and HomeSeer. NOT supported by Iris, ADT Pulse, 2GIG, Honeywell, Vivint, and other Z-Wave alarm panels.INVISIBLE INSTALLATION: Unlike most other door / window sensors which are mounted on the frame, Strips is so slim it fits BETWEEN the frames of any standard window or door. It's as discreet as it can get.OUTDOOR READY: Strips is completely sealed so it can be mounted on any non-metal surface outside. Just remember to keep it within your hub's Z-Wave range and don't let it sit in water for too long (rain is fine).SIMPLE AND QUICK SET-UP: Strips adds to your Z-Wave hub in minutes through auto-inclusion, just click on Add Thing and take off the magnet. It attaches with a piece of tape and the battery lasts up to 10 years, making it super low maintenance compared to any alternative.SUPREME COMPONENTS: Designed and made in Europe, Strips is built from the highest quality materials that guarantee durability. It's Z-Wave Plus certified to ensure the technology inside is up to the highest industry standards.
Check price on Amazon

13 Reddit comments about Sensative Z-Wave Plus Ultra Thin Door/Window Contact Sensor Strips Guard, Good for Outdoor Installation:

u/uberrob · 5 pointsr/homeautomation

Ot you could do what I just did and get these Sensative z-wave strips :

Sensative Z-Wave Plus Ultra Thin Door/Window Contact Sensor Strips Guard, Good for Outdoor Installation https://www.amazon.com/dp/B01LWMTUI8/ref=cm_sw_r_cp_apa_i_r-w5Ab4BAAZHN

They are weatherproof, and good down to 20 below. They stick to even rough wood gates, and the batteries last 10 years. They don't need special smartthings smart apps because they show up as open/close sensors.

u/_CLE_ · 2 pointsr/Abode

You have a big enough gap at the top for the sensitive strip, which is my favorite door sensor so far, I can’t even tell that it’s there

Sensative Z-Wave Plus Ultra Thin Door/Window Contact Sensor Strips Guard, Good for Outdoor Installation https://www.amazon.com/dp/B01LWMTUI8/ref=cm_sw_r_cp_api_F1xPAb7DYFHXN

u/rootyb · 2 pointsr/homeautomation

Nice! I e been looking at [these](Sensative Z-Wave Plus Ultra Thin Door/Window Contact Sensor Strips Guard, Good for Outdoor Installation https://www.amazon.com/dp/B01LWMTUI8/ref=cm_sw_r_cp_api_i_k9E5AbNK9M9F4) for my pool gate, but it’s good to know there are alternatives.

u/Kairus00 · 1 pointr/HomeImprovement

I have a Samsung SmartThings hub, and I have one of these sensors on my gate.

u/ronbrinkmann · 1 pointr/Abode

Check out the Sensative strip sensors too - these look slick (and no drilling needed).
https://www.amazon.com/gp/product/B01LWMTUI8/nothingreal
They also claim up to 10 years of battery life (but there's no way to change batteries - they're effectively disposable at that point.)

I just got an email from Abode saying they plan to support them 'in the near future'.

u/MrHaVoC805 · 1 pointr/homeautomation

This thin Z-wave strip is almost invisible and would suit your purpose.

Sensative Strips Z-Wave Plus Ultra Thin Door/Window Contact Sensor https://www.amazon.com/dp/B01LWMTUI8/ref=cm_sw_r_cp_apa_FkA-yb1D03X36

You could create an IFTTT recipe that would set your Nest to Away when open and Home when closed. I'd imagine you could just use your ST hub to do it as well, I'm pretty sure Nest integrates with ST but I've not used it all that much.

u/raybreezer · 1 pointr/homeautomation

There's this... but it says not for metal gates...

u/chiefs1975 · 1 pointr/winkhub

I've started using these and have been very impressed with how well they work. They're also completely hidden which is nice.

u/czrabode · 1 pointr/Abode

Just two clarify, we have metioned 2 sensors here:

  1. Abode Thin Door sensor

  2. Sensative Thin Strips

    For the Abode sensor, you can ask here.

    For the Sensative sensor, more people might be familiar with it in the other Reddit.

    You might want to go with the Sensative sensor because it's thinner.
u/bugelrex · 0 pointsr/winkhub

This is a slim as it gets:

https://www.amazon.com/Strips-Sensative-Z-Wave-Window-Contact/dp/B01LWMTUI8/ref=cm_cr_arp_d_product_top?ie=UTF8

Only concern is the "claimed" 10 year battery life, if this thing dies after 2 years then its a terrible value...

u/Don949 · 0 pointsr/Ring

You could try mounting sensor on top of door and magnetic contact on molding. Use two faced tape to test before using Ring supplied mounting options. Secure mounting on molding is a common problem. Here is another option https://www.amazon.com/Sensative-Z-Wave-Contact-Outdoor-Installation/dp/B01LWMTUI8 The sensor is compatible with Ring (Z Wave) and can, as I understand, be added as a sensor manually in Ring App. But, it won't have full functionality (no alarm trigger). It will only provide a chime when opened and notifications. You could also consider going without the door sensor and set up a Ring motion detector. If the door is opened, it's very likely someone will walk through.