Reddit Reddit reviews SHIMANO SM-SH56 SPD Cleat Set

We found 11 Reddit comments about SHIMANO SM-SH56 SPD Cleat Set. Here are the top ones, ranked by their Reddit score.

Sports & Outdoors
Cycling
Bike Components & Parts
Outdoor Recreation
Bike Pedals & Cleats
Replacement Bike Cleats
SHIMANO SM-SH56 SPD Cleat Set
Fits: All Mountain SPD pedals except PD-M858 Float: 0deg Pedal Color: Silver Pedal Model: SH56 Unit of Sale: Pair
Check price on Amazon

11 Reddit comments about SHIMANO SM-SH56 SPD Cleat Set:

u/PelloScrambas · 11 pointsr/MTB

Like everyone said, you'll fall over a bit, but stick with it. A few things to keep in mind...

  • Keep the tension as loose as possible; tighten when you feel more comfortable
  • If you're using SPDs, you might want to swap out the cleats that came with the pedals with multidirectional cleats, which allow you to unclip using several different foot motions
  • Put a little lube on the pedal. Someone suggested this to me when my wife was learning and it made a big difference.
u/Chancelloriate · 5 pointsr/bicycling

You've got SPD, or 2-bolt, pedals. Look for shoes that have this on the bottom. You'll also need cleats to attach to the shoes, like these.

u/littlep2000 · 5 pointsr/cyclocross

You need two hole shoes, three are almost always for road cleats. There are styles ranging from carbon fiber racing to leather shoes that would look good in a professional office, but mostly in between.

You may need to buy the cleats if they didn't come with the bike. They usually come with the pedals out of the box.

u/drewts86 · 3 pointsr/MTB

If you go with Shimano’s SPD I suggest getting the multi-release cleats. SPD pedals come with side-release cleats which I found much less intuitive and harder to get out of in clutch situations. I can get my foot down on the multis nearly as fast as flats.

u/Vpr99 · 3 pointsr/MTB

No, you just have to use the Shimano Cleats which will attach to any bike shoe that has the 2-hole mounting system, which 99% of mountain shoes do.

Most pedals (my XT did, but I'm not sure about the M530) came with cleats, so you don't have to worry about that.

u/adam_f_1984 · 2 pointsr/MTB

Throwing in my 2 cents. Everyone has their opinion on what is better so this should be taken as what I have learned with trial and error.

​

I use SPD clips with Shimano PD-M647. The outer cage acts as a flat so that I can alternate if needed (I rarely use them now). This was especially good for starting out. The resistance can be adjusted so you get used to clipping out, adding resistance as needed.

​

Buy a shoe with a rigid sole, I started with a pair of specialized tahoe and it had so much flex that every time I tried to unclip, my foot would move but not the shoe, resulting in a fall. I since switched to Shimano ME2 and they're way better. I'm sure there are better shoes out there. but these work well for me.

​

There are 2 types of SPD cleats, one way (SM-MH51) and multi-directional (SM-MH56). I would advise to use the multi-directional as it is easier to get the hang of.

​

Unclip early before you stop, most falling happens mostly at slow speeds. For me its mostly during a climb or trying to get over a rock where I lose speed or the wheel slips, as long as you're moving it's tougher to fall, because physics.

​

I would say that if you like to send it over jumps and you bail a lot, you may not want to use clipless. There's a reason people use flats, and that's one of them. Small jumps aren't a problem for me but I'm not doing transfers or big stuff.

​

There's a learning curve to going clipless. The more you do it, the more it becomes second nature. Good luck!

u/agaskell · 2 pointsr/MTB

I bought the same bike a few months ago - I love it! I'm also pretty new and after a few months went clipless. I went with these pedals and these cleats. The nice thing about this combo is that whenever I have an "oh shit" moment I'm able to unclip without thinking about it. I haven't been outside of my state (MN) for MTB but we have an IMBA model trail and quite a few trails in the twin city area.

With snow coming to your state maybe eye up a Pugsley or Mukluk - I'm going to head out for my first snow ride today!

u/SgtBaxter · 2 pointsr/cycling

For people new to clipless I like to recommend mountainbike SPD pedals and for them to use the SH-56 multi-release cleat. They pop out with your foot simply twisting, just angle your ankle slightly and they'll release. It's nearly as easy to unclip them as it is to take your foot off a platform pedal.

As a bonus they help you work on your technique since you need to focus on keeping your feet properly on the pedal but you get the benefits of clipless when you need it. Plus MTB shoes are easy to walk in.

After you get used to the multi-release cleat you can switch to the standard cleat which requires rotating your foot. Then eventually you can make your way to road clipless SPD-SL's or Look.

As for getting started, you should clip in your right foot and be ready to go. Don't worry about clipping in your left foot, just pedal to you can focus on clipping in and then do it. With clipless you only need one leg to propel the bike ;)

u/lavacahacemu · 2 pointsr/cycling

For the pedals you currently have, it's going to be hard to find cleats, as these are rather old.

If you replace your pedals, you can even use mtb pedals (spd cleats) and mtb shoes. These are usually easier to walk on, but have the disadvantage of being less efficient for pedaling, but only slightly. If you go with proper road pedals, you're probably looking at 3-bolt patterned cleats, so your shoes should accept 3-bolt cleats. Of course, there's also 2-bolt patterned cleats for road bikes, like eggbeaters and spd (non-sl). And yes, you can get shoes that accept both type of cleats. The good news is that pedals usually come with cleats, if you're getting shoes at the same time, make sure they're compatible.


As for the bonus, check your tires, bar tape, maybe even the saddle. Definitely get your drivetrain checked, but that would have come back as recommended upgrades from your LBS.

u/gemthing · 1 pointr/xxfitness

Former bike shop employee here. Shoes should fit comfortably but securely. As others have said, you don't want them too tight. But you definitely don't want them slipping off. You'll be pulling up on the pedals, so having your feet slipping out would really suck.

Cleats are sold separately. These are what you need, just standard Shimano SH-51 SPD cleats. I'm 99% sure that's what your spin bikes will need, but to really be certain, ask your instructor. Some spin bikes have dual-sided pedals - one side works with "mountain bike" SPD cleats, the other side works with "road bike" Look-style cleats.

Assuming those are the cleats you need for the pedals, that means they're using "mountain bike" pedals, and that means you want to buy "mountain bike" shoes, or standard touring shoes: something like this. Don't buy "road" shoes unless your instructor specifically says that's what they use. "Road" shoes have a hard, slippery sole that the cleat sits out on, and it makes it really, really hard to walk around.

In the box with your shoes will be some little metal bits with screw holes in them. These go inside your shoe, under the footbed, and the cleats will screw into them through the sole of the shoe. You may have to cut out the bottom of the shoe sole first, though with most shoes you don't have to do that anymore.

When you go to spin class with your shoes the first time, make sure to take the allen wrench with you so you can adjust your cleats after getting on the bike. Your knee/foot alignment is impossible to predict, and once you clip into the pedals you'll quickly figure out that one cleat or the other may need to turn in or out to make your knees/feet feel comfortable.

u/iraxl · 1 pointr/cycling

I used to fall all the time. Then I got these based on a recommendation on this forum. Have not fallen since.

https://www.amazon.com/dp/B0029LIYE2.