Reddit reviews Simple Deluxe HIWKLTCLAMPLIGHTMX2 2-Pack Clamp Lamp Light with 8.5 Inch Aluminum Reflector up to 150 Watt E26 Socket (no Bulb Included) 6 Feet 18/2 SPT-2 Cord, Silver

Would a fixture like this solve the directional issues of a bulb style light? Just downloaded a light meter, what lux measurement is the goal at the leaves?

Yeah, exactly that. Here is the instructions for the stand. You may have to adjust the height of the side pieces depending where you want to the lights to clip. I spray painted mine and put Christmas lights on it because I like for things to be pretty, haha. My CFL lights are 1600 lumens if I remember correctly. I want to switch to LED soon.

Edit: these are the exact lights I have, it provides measurements for the reflector and clip so you can adjust your setup as needed. I'm sure Home Depot has something similar. Lastly, I put a bread tie around the clamp part of mine. The clamps are ridiculously strong, but it gives me piece of mind if one fails or gets bumped off the PVC that I won't burn my house down, haha.

light fixtures

I like 100watt daylight CFL bulbs that have a 5-6.5k spectrum (a 4 pack is like $12) And for clip-on housings I really like this style

Always happy to share knowledge. :) All my lights are diy pendant lights so I don't have personal suggestions for clamp hood setups but here are a few suggestions:

Clamp light fixture - No personal experience with this one but it's a broader clamp hood to accomodate larger LED lights but they may poke out of the bottom of the hood. Ymmv


LED Light suggestions:

• Sansi - This is the light I use and I really like it. I have no useable windows in my apartment so all my plants are under 4 of these lights and they're all pushing out new leaves all the time. The monstera uses 2 bulbs as its become quite large. Sansi also makes this bulb in a couple lower watts if this one is too intense but you'll have to move your plants closer to the bulbs.
  
  
• GE - No personal experience with this one but the specs are really similar to the Sansi above. Btw/fyi, PPF/PPFD is a more accurate measurement of how much light is available for photosynthesis.
  
  
• iledlight - Again no personal experience but this looks like a super bright light, brighter than the Sansi or GE. I might consider buying this one to try on my monstera... 🤔
  
  Hope this helps and good luck! 🌱☘🍀

Bulbs and lamp. This is my set up and it's a game changer! You can use any old desk lamp lying around

I use a Phillips Grow bulb and a clamp lamp, but that’s because I’m growing my mushrooms in the same room I’m growing my weed, and that room is locked down like Fort Knox against light.

But indirect sunlight should be just fine, my friends growing mushrooms in her craft room/office, and her tub’s only getting indirect sunlight and they’re doing fine. Bod even tells you that sunlight isn’t necessary, mushrooms just look weird apparently without any.

I use these

multijoint desk clamp

clamp with aluminum reflector

LED 150watt equivalent 5000k daylight bulb

They’re game changers. Good luck

As of right now, I am good on space. I have some room on my window sill on the other side behind my bed that I can fit some IF I get any more. I have 42 total plants so I really don't NEED any more... I am trying to stay pretty cheap to be honest. Less than $50 but I don't want something so cheaply made that it won't last me a month. I have been looking at something like this bulb in this lamp to clip onto my bed to get pointed at each window or even onto a cat tree, which I moved out of the way for the sake of the photo but I usually keep to the left of my nightstand. I don't know about the LED lightbulb but I also know that succs prefer blue light but I read that fluorescent light is ideal for a cheap, quality lighting setup. While I know that LEDs aren't cheaper than fluorescent, do they work as well? I honestly know little to nothing about plant lighting, sorry for the essay!

Edit: Looked at the Overwinter Megathread and someone posted that their Succs loved this bulb so I might just get 2 these if they are tried and true. I also might just end up getting a real, hard setup with shelves, lighting, the mix. It might be my best option at this time.

i use an ordinary clamp lamp with a high watt halogen spotlight in it. Wonderfully cheap and portable. The “daylight” or “true color” lamps are way too blue for me.

It's actually just a clamp light like you get from home Depot or Lowe's or any big box hardware store. They're all the same really roughly cost around 6-10 bucks. I got 2 of these off Amazon for about 16 bucks, and bought a 6 pack of 6500k LED lights as well for I believe 23?

Simple Deluxe 2-Pack Clamp Lamp Light with 8.5 Inch Aluminum Reflector up to 60 Watt E26 (no Bulb Included) 6 Feet Cord UL Listed https://www.amazon.com/dp/B06XD1PK37/ref=cm_sw_r_cp_apa_i_UxkaBbF461FSZ

(They're on sale for 14 and some change lol)

Leson 100 Watt Equivalent A19 LED Light Bulb Standard E26/E27 Base 13W Energy Saving, Daylight Cool White 6500k (6 Pack) https://www.amazon.com/dp/B01FYGDX3A/ref=cm_sw_r_cp_apa_i_xykaBbVR6BNS1

Here is the clamps they are screwed into!


Simple Deluxe HIWKLTCLAMPLIGHTMX2... https://www.amazon.com/dp/B06XD1PK37?ref=ppx_pop_mob_ap_share

I like [clamp lamps] (https://www.amazon.com/Simple-Deluxe-Aluminum-Reflector-Included/dp/B06XD1PK37?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-d-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B06XD1PK37) myself. And I attach them to [pole lamps] (https://www.amazon.com/Boston-Harbor-TL-TREE-134-BK-3L-Light-Black/dp/B003A9E734/ref=sr_1_5?s=hi&ie=UTF8&qid=1537695631&sr=1-5&keywords=pole+lamps) such as these.

You can also get these sort of things cheaper at big box stores sometimes.

I recently bought an LED light bulb at a dollar store (for a dollar) and was surprised at how bright white it is.

https://www.amazon.ca/Simple-Deluxe-Brooder-Aluminum-Reflector/dp/B06XD1PK37/ref=mp_s_a_1_3?crid=31E775FZ2CXZI&keywords=clamp+light&qid=1556669544&s=gateway&sprefix=clamp&sr=8-3

https://www.amazon.ca/Satco-Products-S3929-Incandescent-Shatterproof/dp/B000V52X7C/ref=mp_s_a_1_5?keywords=100+watt+incandescent+light+bulbs&qid=1556669767&s=gateway&sr=8-5

How quickly do you need to set up / tear down?

A couple of these:
CHAUVET DJ CH06 Lightweight Lighting Stand w/T-Bar (50lb Capacity) https://www.amazon.com/dp/B0096JYRY6/

...would give you a mounting location above eye level. Now you can decide your light budget. At the cheapest would be 4-6 basic hardware clamp lights (like these, but get them at a local hardware store for about $6):
Simple Deluxe 2-Pack Clamp Lamp Light with 8.5 Inch Aluminum Reflector up to 150 Watt E26/E27 Socket (no Bulb Included) 6 Feet 18/2 SPT-2 Cord UL Listed https://www.amazon.com/dp/B06XD1PK37/

Point them up at the ceiling for good ambient light, or aim one or two at the performance area. Higher in budget, a couple of inexpensive LED par lights may be enough to light the practice space. You probably won't need sandbags for that small amount of weight.

Brighter, but a bit more expensive: you could even suspend /attach shop lights to the light tree cross bars. I recommend LED in case they fall.

Sunco Lighting 2 Pack LED Utility Shop Light, 4 FT, Linkable Integrated Fixture, 40W=260W, 5000K Daylight, 4100 LM, Frosted Lens, Surface/Suspension Mount, Pull Chain, Garage - ETL, Energy Star https://www.amazon.com/dp/B0725D24X2/

The trees will make setup and teardown easier, you can run power right up them, and if you move spaces they're useful in the future. Those string lights are not very bright and you'll begin losing bulbs as soon as they get jostled while hot (if incandescent). Plus taking tape on and off each time may be a big pain.