Reddit reviews Solar Display Stand Turntable, Battery Double Used Rotating Display for Jewelry Spinner Watch Hobby Collection Shelf 1PC Black
We found 7 Reddit comments about Solar Display Stand Turntable, Battery Double Used Rotating Display for Jewelry Spinner Watch Hobby Collection Shelf 1PC Black. Here are the top ones, ranked by their Reddit score.
【Automatic rotating platform】Double use, turning by 4 built-in solar panels or AA battery (not included). Remove the white cover on the top, the motorized rotating display can rotate by 360 degree clockwise or counterclockwise if you push the plate.【Maximum light reception】It can be upgrade efficiency by battery and strong lighting. Jewelry turntable can load more than 300g under 1 meter. under 0.5 meter, negative weighing more than 500g (May be have a deviation).【Without On /Off switch】Solar powered can drive the display turning by 4 built-in solar panels, so the battery turntable base top has not include On /Off button to stop rotation. Only way to control stop is remove the plate or battery.【Widely use for】for Jewelry, watches, mobile phones, digital cameras,mini toy,collectibles. Using in the home living room, souvenirs store, library, opening ceremony, anniversary celebration, supermarkets and exhibitions for advertising purposes.【Material】 Abs plastic. Compact size, light weight. Easy to assemble after you remove the plate cover. Solar powered rotating stand is wonderful to showing your love things for friends or others.
I bought a cheap one off Amazon just for this!
https://www.amazon.com/dp/B072XJ55DG/ref=cm_sw_r_cp_apa_ex1JBbQ2N9G6R]
Here are the things I bought:
Turn Table:
https://www.amazon.com/gp/product/B072XJ55DG/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
UV LEDs
https://www.amazon.com/gp/product/B07QBM9SSJ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Timer (Sold out even though I bought it like a week ago, there are some related things that should work)
https://www.amazon.com/gp/product/B07VLXR7Z1/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Unfortunately the rest was scrap that I had been hoarding. I salvaged that M3D mini frame from the garbage, the red UV blocking Polycarb was salvaged off of a broken laser cutter, the handle and hinge were from the junk pile (but could easily be printed), and the rest was stuff I had lying around (wire, tin foil, electrical tape, glue). You can buy uv resistant polycarb from amazon and for the case many people use small boxes or buckets like the lixhult from IKEA or a paint bucket for which they make a clear lid.
I use this nail UV light from Amazon.
I give the resin 2 or 3 minutes under the lights and that's enough to fully cure it.
To rotate the models under the light, I use this solar powered display
If the model and rotating display are too tall to fit under the light, I support the light on some plastic boxes. Try not to look at the light and keep pets away.
Solar Display Stand Turntable, Battery Double Used Rotating Display for Jewelry Spinner Watch Hobby Collection Shelf Without Led Light,1Pc(Black)
https://www.amazon.com/dp/B072XJ55DG/ref=cm_sw_r_cp_apa_i_3i0ODbNWS11S5
ohhh haha it's this https://www.amazon.com/gp/product/B072XJ55DG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I haven't actually tried the solar part out, I just us a AA.
I coated a trashcan I got at a local store with these LEDs and it only cost me about $30. I flip the can over top of the print and plug it in and you can even add a mini turntable to assist in everything getting exposed as well.
correct, my process is: detach from plate into ipa bath #1, pick up and brush in bath with paintbrush to remove excess resin, bring over to waste bin, clip supports, wet sand base / areas to touch up, dip in ipa bath#1 again and paintbrush off any more excess resin exposed by removing supports and produced during wet sand, then final dip and paintbrushing in ipa bath #2 to ensure as little resin remains on the mini as possible.
in all honesty, after this process the model looks and feels clean and not tacky at all so unsure if it even needs a final cure, but i do it anyway, about 5-15 minute in my pot
and yes, all those turntables are a complete cluster of reviews, I honestly just closed my eyes and picked one that had prime shipping, lol pretty sure i got this one https://www.amazon.com/Display-Turntable-Battery-Rotating-Collection/dp/B072XJ55DG/ref=sr_1_2?keywords=turning+display+stand+solar&qid=1564585668&s=gateway&sr=8-2
been looking for a 3.2L ultrasonic cleaner, but they are all like $70 or higher, trying to wait and see if i can catcha sale on one