I use one of these. It holds up to 12 decks (though you need to buy 2 to get the correct compartments for that)

Stanley 10 Removable Bin Compartment Deep Professional Organizer https://www.amazon.com/dp/B001G1CUK0/ref=cm_sw_r_cp_apa_CIbLBbZ1TXT9W

Just use one of these:

https://www.amazon.com/dp/B001G1CUK0/ref=twister_B01M3PL0CR?_encoding=UTF8&th=1

​

I used to have individual deck boxes for all my commander decks and switched them all to this. Fits up to 12 double-sleeved commander decks, or cut back to 11, and you have space for dice/tokens/etc.

I use the Stanley 10 bin and 25 bin trays. They're also great for my loose Lego collection so I have a few spares and pull one for whenever I need one in the garage or in the house.

This isn't a perfect solution though. I had to build a rack in order to store all of these containers. Also, it is a 2 step process to get anything out: 1) remove the tray from the rack and 2) open the container to get what I need. I'm fine with this though because it is ultra portable and the 2 step method isn't too much of a hinderance. Also, this way the storage density is pretty high and I can keep a lot of stuff in a small space.

Everyone has already made great suggestions for your current collection so I'm just going to add a suggestion for the future if your collections expands. I have 22 decks. For a collection of that size, all those individual boxes are a pain, get these:

https://www.amazon.com/gp/product/B001G1CUK0/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

I bought two of the 10-compartment versions so I can have all deck-sized trays in one box, but upon receiving it I noticed you can actually fit the nice crystal commander boxes in place of the yellow compartments, so you should be fine just buying one and replacing the double-size trays with those.

I haven't had an issue with these deck boxes either and I've kept some decks in them for almost 10 years. If I end up dropping one and cracking it I'm only out a couple of bucks rather than $10+.

I transport up to 12 decks in the Stanley Organizer (https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0) like so: Decks for Magic Fest Las Vegas https://imgur.com/a/Q65Iqvz

If I only want to take up to 4 decks those clear plastic deck boxes easily fit into the Ultimate Guard Arkhive: https://www.amazon.com/Ultimate-Guard-UGD10767-Arkhive-Standard/dp/B079T8J6V1

I use a Stanley organizer. It has 10 compartments; 8 small and two large. The small compartments can each hold a double sleeved commander deck, the large compartments can hold about 200.

Stanley 10 Removable Bin Compartment Deep Professional Organizer https://www.amazon.com/dp/B001G1CUK0/ref=cm_sw_r_cp_apa_i_9bzdBbTK81R2R

Buy yourself one of these puppies. It holds 12 decks. The compartments fit just about any 100+ deck box or you can just leave the deck in the compartment on its own.

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0

I have one of these that I store a lot of my decks in. Very cheap too. And if you wanna replace the big bins with smaller one's theyre only ~$2
https://www.amazon.com/dp/B001G1CUK0/ref=cm_sw_r_cp_apap_Hk5wyDRF47epw

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0 I love this thing.

I have the same thing and got it through amazon. Here's a link.

For those wondering what he means by "Stanley toolboxes", this is the product he is talking about.

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0

as you can see in the pic it has 2 extra large compartments. If you're at a home depot or something just grab the normal sized compartments from a different box and you can comfortably fit 12 commander decks, it's really sturdy, I'm a big fan.

As stated in other comments a cheap DSLR backpack will work well. https://www.amazon.com/dp/B002VPE1WK/

Another option is a part organizer: https://www.amazon.com/gp/aw/d/B008J2IQ34
Or
https://www.amazon.com/gp/aw/d/B001G1CUK0/

This one can hold up to 12 double sleeved EDH decks.


Always be on the lookout, some of the best deckboxes out there are not made for cards but happen to work better than branded crap. I like to use the boxes my cellphone came in to hold whatever deck I take to FNM.

https://www.amazon.ca/014710R-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=pd_aw_lpo_469_bs_img_2?_encoding=UTF8&psc=1&refRID=NG3GTGB1VBX8J9YEQJ1F

Organized using Stanley 25, Stanley 10, Sterlite 1961, Sterlite 1962 and ziplock bags. In the Sterlites I have all my 2xX's, 1xXs, "slopes" (anything with non-right angles on it) and "inspiration pieces" (unique pieces such as tower spires and ship hulls). In the Stanleys, I keep all other pieces organized as specifically as made sense. There's still some further sorting I can do in those (e.g. all studs are together, not separated by color), but this feels like a huge win.

I suggest this to everyone, I've used mine for years and lately a couple of guys at my LGS have jumped on the train too. It's awesome.

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0

Ultimate Guard Boulders for the decks themselves.

Transport them in a Stanley 10 Compartment Professional Organizer. This is what I use to carry around my EDH decks.

I use these: Stanley 10 Removable Bin Compartment Deep Professional Organizer https://www.amazon.com/dp/B001G1CUK0/ref=cm_sw_r_cp_apap_L5beTKfQnmA3X

If you keep the plastic holder, you can use the yellow boxes to stabilize it. Give me a few and I'll take some pictures.

I sort by a combination of color and piece using a three tiered system.

Tier 1 - Small Parts Storage
All of a given piece are put into a drawer at this point. As more drawers are needed, I begin to sort into colors. Once I fill 4 drawers, I move to Tier 2

Tier 2 - Stanley Cases
Most of my brick and plates are in these. Each has ten interchangeable trays so you can reorganize to have a case you can take with you for a given project. I mostly use the 10 compartment model but own a couple of the 25 compartment for things like 1x1 tiles that come in a large number of colors. Once one of the large compartments is full, I move to tier 3.

Tier 3 - Shoebox storage
Each of these holds 6.5 qts of brick which is equivalent to one Pick a Brick case from the LEGO store. If one of these gets filled up, I start a second one.

Most of my collection is sorted this way. I do use these for minifigs and plastic drawers for things like bionicle parts.

For storing and transporting larger number of decks, I'd recommend a tool box such as this one:

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=sr_1_2?m=ATVPDKIKX0DER&s=hi&ie=UTF8&qid=1510241000&sr=1-2&refinements=p_89%3AStanley%2Cp_6%3AATVPDKIKX0DER&dpID=51waoS12%252B5L&preST=_SY300_QL70_&dpSrc=srch

I think I found it!

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=sr_1_47?s=power-hand-tools&ie=UTF8&qid=1468759771&sr=1-47

EDIT: Well something close to it.

I agree with the durability comment. I've got a couple dragon shield gaming boxes for transporting individual decks, but when I take a set of Commander decks, I use Dex Protection boxes but store them together in a hard exterior case.

We settled on these to try

• Toolbox
  
• Compartment thing
  
  Thanks all

something i recently got was this great for organizing cards or other various things.

I use one of these: https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0

It has 2 large compartments and 8 small ones.

The small compartments hold an ultra pro deckbox (80) with just a bit of extra room (so that they may hold a larger deckbox, I just haven't tried it). They also hold a sleeved commander deck pretty perfectly.

The large compartments either perfectly fit three Ultrapro 80 deckboxes, or perfectly fits one Ultraguard 100 flip'n'tray (which was pretty cool when I discovered it).

I usually devote 1 compartment to dice and tokens.

It's not going to fit the mat (theoretically you could remove a row of bins from inside to fit it, but the rest would rattle around then). But requiring the mat fit into the same case is really going to limit your options. You could add some velcro loops to the outside to hold it, or just put both the box and the mat together in a bag.

Some adjustable hardware storage boxes can hold decks etc. i.e. This Stanley 10 Removable Bin Compartment Deep Professional Organizer https://www.amazon.com/dp/B001G1CUK0/ref=cm_sw_r_cp_api_IL9Fzb1B84WGR obviously this one is too small but you get the idea. I saw some guy have like 10+ commander decks in something like this

What to store things in

I use binders for commonly used cards and cardboard boxes for "bulk" cards (The cards you don't think you will use very often): 5000 capacity box, 800 capacity box

I also hear that these Stanley Organizers are also incredible for storage, as each compartment is the perfect size for a sleeved MTG commander deck (100 cards).

The binder should definitely be sorted. Not only is it more organized that way, you can find the cards you need much faster. The box can be unsorted, though I like to at least keep cards belonging to the same faction together.

This does run into the problem of occasionally not knowing whether a card is in the binder or box, but it has the advantage of giving you quicker access to the cards you most commonly use. I mostly do this because of habits from MTG, where you get tons of useless cards, but Netrunner doesn't give you nearly as many useless cards, so you could make the argument for storing all your cards together instead of differentiating between commonly used cards and bulk.

How to sort cards quickly

Your cards can be in whatever order you want: completely alphabetical, by faction and then by type and then alphabetical, by set, whatever. Your personal preference.

However, when it comes to sorting cards, or anything in general, there are fast ways to sort and slow ways to sort. Anyone who has studied computer science can attest to this. The difference is small when you only have a few cards, but quickly becomes massive as the number of cards grows.

Here are the two sorting algorithms you should know if you want to sort your cards quickly: Quicksort and Merge sort. They are among the fastest algorithms out there, they're easy to understand, and they're practical for sorting cards by hand. I'll explain them in the context of sorting cards below.

Quicksort

Here's how quicksort works for computers: Choose a "pivot" item at random from the unsorted pile. Now, go through everything and divide it into two piles: Those that would come before the pivot, and those that would come after the pivot. Then, sort each pile individually (usually with yet another quicksort). Once the piles are sorted, just combine them and put the pivot in between them, and voila, the pile as a whole is in order.

However, if you're a human, you'll find it more efficient to sort based on certain characteristics of the card that you can quickly identify (such as the card's faction) instead of whether or not the card comes before or after a randomly chosen pivot. In addition, you'll want to separate into multiple piles instead of just 2.

Here's an example: You want your cards sorted by faction and then in alphabetical order. You already sorted you cards by faction, and now, you want to sort your Anarch cards in alphabetical order. The cards you want to sort are in the following order: Wyldside, Demolition run, Deja Vu, Grimoire, Corroder, Medium, Yog.0, Stimhack, Parasite. The first step of quicksort is to divide the cards into piles. When sorting alphabetically, I like to make a pile for cards from A-E, one for F-M, one for N-R, and one last one for S-Z. However, as long as every card in one pile comes before every card in the next pile, it doesn't matter how you make your piles. So, dividing these unsorted cards into piles (according to my preferred sorting scheme), we get the following piles:

{Demolition run, Deja Vu, Corroder}, {Grimoire, Medium}, {Parasite}, {Wyldside, Stimhack, Yog.0}

Each individual pile is not in order, so we sort each pile individually (I would use another quicksort on these piles if they were bigger) to get:

{Corroder, Deja Vu, Demolition run}, {Grimoire, Medium}, {Parasite}, {Stimhack, Wyldside, Yog.0}

Then, we just combine the piles and we're good.

Merge sort

Here's how merge sort works for computers: Divide your big pile into 2 separate piles, and then sort those piles individually (Usually with another merge sort). Then, once the 2 piles are sorted, merge the piles into one sorted pile. The merging process is made much easier by the fact that the two piles are already sorted individually.

Here's how the merging process works: Look at the top item of both piles. Whichever one comes first gets added to the bottom of a new combined pile. Repeat until both piles are empty, and voila, your combined pile is sorted in order.

Example: You have the following sorted piles: {Demolition run, Yog.0, Wyldside}, {Corroder, Parasite}. The first elements of our 2 piles are Demolition run and Corroder. Corroder comes first, it becomes our new combined pile. Now, the top item of our 2 piles are Demolition Run and Parasite. Demolition run comes before Parasite, so it gets put at the bottom of our combined pile. The top cards of the piles are: Yog.0, Parasite. Parasite is put at the bottom of the combined pile. The second pile is now empty, so just put the rest of the first pile at the bottom of the combined pile. The combined pile looks like this: {Corroder, Demolition run, Parasite, Yog.0, Wyldside}. It's sorted, yay!

If you're a human, you'll be doing mostly the same thing as the computer. However, instead of having to lift up the combined pile to put a card at the bottom of it, you can instead make the entire combined pile face-down and add cards to the top. When you're done merging, just flip the combined pile upside-down.

Which one?

From experience, quicksort is a lot better if you have an unorganized mess to sort.

However, if you're adding some brand new cards to an already sorted collection, you'll want to use mergesort instead, since your collection is already sorted. Simply sort the new cards, and then merge the pile of new cards and your already sorted collection.

How NOT to sort your cards

Perhaps you currently sort your cards like this: Pull a card out of the unsorted pile, find out where it goes in your pile of sorted cards, then put it there. Repeat until unsorted pile is empty.

Or, maybe you do this: Go through the unsorted pile, find the item in the pile that goes below every other item in the unsorted pile, put that item at the bottom of the sorted pile. Repeat until unsorted pile is empty.

If they feel slow, that's because they are. They're mathematically inferior to quicksort and merge sort. The first method is actually OK if you want to just put back a card you took out of your collection, but if you have more than a few cards to add to your collection, merge sort instead.

you want the stanley toolbox.

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0

the small compartments hold an double sleeved edh deck with the commander in a toploader. the large compartments are perfect for dice/counters/tokens/draft sleeves w/e.

I can tell all the decks apart based on the sleeve color.

I personally use the Stanley organizer. Perfect fit for up to 8 commander decks, and two larger spaces for anything you need. All the compartments are rearrangeable and no cards fall through because the lid seals tightly.

I suppose you could make it fit 7 commanders, and remove the 2 big compartments and 1 small one, and it might be able to fit a playmat. But i just carry the case+my backpack with my trade binder and playmat.

Best of all its super cheap, and super sturdy.
https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=sr_1_1?ie=UTF8&qid=1495426718&sr=8-1&keywords=stanley%2Bcase&th=1

Your local hardware store has toolboxes that commander decks fit nicely in. Haven't tried them with 60 card decks but I've seen quite a few put commander decks in them. Something like this or this.

Stanley 10 Removable Bin Compartment Deep Professional Organizer

I got that in the mail yesterday, it's great. Feels very durable and well put together. The compartments are all removable and rearrangeable. I use it for my diy juice concentrates and it has no problem holding 30ml bottles, probably even 50ml bottles standing up. I can get a picture of mine with all the juice bottles inside when I get home in a few hours if anyone is interested.

I've got an Oloro deck I'm trying to decide if it's going under the knife, getting restructured as another commander, or getting deconstructed. Also, if you're trying to transport a bunch of decks, I've found this to be a game changer. Perfectly fits decks, looks nice, and you can fit 8-10 decks and nice in one case for less than $20

Quick amazon search and it turns up here:

http://www.amazon.com/dp/B001G1CUK0/ref=twister_B00HHQAN3E?_encoding=UTF8&psc=1

You got this picture from amazon.co.uk, surely you can buy that exact product?

I just searched "storage cabinet" and got the exact item you wanted for fairly cheap and free shipping:

http://www.amazon.co.uk/Raaco-Organiser-Drawer-Cabinet-RAA126762/dp/B000Y8DSZM/ref=sr_1_10?ie=UTF8&qid=1370296027&sr=8-10&keywords=storage+cabinet

Why not just go with this? If it were $24 for US amazon, then I'd probably buy it. I just bought three of these because of the sale and so I can have portable storage:

http://www.amazon.com/gp/product/B001G1CUK0/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

edit:spelling

I use this. Slightly smaller than the Fatmax XL but at $20 less it works fine and you could buy two. Each bin holds a deck easily with room for tokens/extras...12 decks if you trade out the big bins for small bins.

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=dp_ob_title_hi

http://www.amazon.com/gp/product/B001G1CUK0?psc=1&redirect=true&ref_=ox_sc_act_title_1&smid=ATVPDKIKX0DER

These are perfect and dirt cheap for storing X-wing miniatures.

Don't bother buying pre-made foam, it's way to expensive for something you can do yourself.

I just ordered some more of these which I use for Armada - I did a dry fit and I think I can cram all the tiles and big models into the deep one and everything else into the other.

http://www.amazon.com/gp/product/B001G1CUK0

http://www.amazon.com/gp/product/B00005QWYF

We use this to hold most of our commander decks

I don't know if a deck box will fit in not of the compartments, thin ones might. You can fit two deck boxes from the commander anthology in each of the larger compartment.

It's $16 on amazon.

Not a bag but this is what I use:
https://www.amazon.com/gp/product/B001G1CUK0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I use one of these for my decks:
https://www.amazon.com/gp/product/B001G1CUK0/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

I have 8 EDH decks, 1 standard deck, a box with extra sleeves and a dice bag in it. I'm going to attach the tube with my playmat in it to one of the sides using velcro strips.

I'd suggest either a trio of Ultimate Guard Stack'n'Safe Deck Boxes, a pair of Quivers or a Stanley 10 Removable Bin Compartment Deep Professional Organizer.

http://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=sr_1_1?ie=UTF8&qid=1425800531&sr=8-1&keywords=deep+organizer
I also organize it by flavor type, so that if I'm making a creamy flavor I can just grab the cream section and maybe the fruit or nut section out of it
Removable containers OP!
I use for my smaller bottles of flavoring, various needle tips, syringes, etc.

Interesting. for reference, I have 15-20 thousand pieces, and I'm only now considering sorting to be worthwhile. I'm sorting my most common pieces by type (all colors of 1x2 plates in one compartment) and other types in mixed categories (all 1xN slopes in one compartment (1x2, 1x3, 1x4 all together). I'm using these (several of each):

http://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/

http://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/

But with under 5K parts, I'd recommend just sorting by size, as I mentioned before, maybe into something like this, with one drawer for each size:

http://www.amazon.com/Sterilite-20738006-3-Drawer-Organizer-See-Through/dp/B002BA5F6Q/

Hope that helps!

I second his choice. Heres a link to the product (you can find it cheaper in your local hardware store. EDIT: In Chicago its under $17)

https://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=sr_1_1?keywords=stanley+10+organizer&qid=1555338000&s=gateway&sr=8-1

Heres a link to a picture I have of it in use:

https://imgur.com/utyPAtx

I have 2 monster playmat tubes velcro'd to the sides of the thing as well, so it transports everything I need. In the picture i posted theres a 540 cube, 120 lands, 3 EDH decks, extra sleeves, and dice//tokens.

For my ships, I use Stanley organizer boxes, mostly https://www.amazon.com/dp/B00005QWYF/ for small and large ships and https://www.amazon.com/dp/B001G1CUK0/ for epic ships and a few of the bigger large ones such as the Decimator.

I've been pretty happy with the Stanley cases. The removable compartments make for pretty easy reconfiguring, if you like that sort of thing. You do have to be willing to cut your own foam.

The 10 compartment one is deep enough to fit the Tantive, and should fit at least one other ship in with it. (I only have the one)

Amazon Link


Side note on pistol cases. The criminal element in this world often steals that sort of thing. I've heard stories of people using them to transport other things (model horses), and having their car broken into. Great for solid storage/transport, but worth keeping them out of sight.

Rolling tool chest for the marine battery. Army surplus hard case for the Atlas mount. Hard case with foam for smaller scopes. Soft cases or blankets for big scopes. Organizer case from the hardware store for small stuff.

I bought two of these. With some rearranging, one will hold six ultra pro boxes (inserted sideways), 7 Commander decks and one more compartment for tokens and dice. Having it just filled with single compartments will hold I think 12 Commander decks.

Love the Ultimate Guard Twin Flip Tray with Xenoskin. The token holder in the deck box isn't really large enough for everything you need, but a set of dice for casual play fits well there. Tokens themselves are best kept (and organized) in a Plano-style plastic tray with good clasps. You don't want them coming undone in your bag.

I've seen a couple people use Stanley (or similar) brand organizers for carrying a large number of decks around, but you'd want to check the size of the compartments carefully before buying.
https://www.amazon.com/dp/B001G1CUK0

THIS. Stanley Organizer. This thing holds multiple double sleeved decks and I ended up using one of the leftover spaces to hold tokens and dice.

Home Depot, Lowes or Amazon.
http://www.amazon.com/Stanley-Removable-Compartment-Professional-Organizer/dp/B001G1CUK0/ref=sr_1_2?ie=UTF8&qid=1405177855&sr=8-2&keywords=stanley+bin

Its a Stanley removable bin storage box.
The one in the picture is the small one- it only has ten compartments.
I own the larger one, the FatMax XL, which has 14 compartments.

The REALLY nice thing about these boxes is that those containers are removable, swappable and safely/comfortably hold 100 double sleeved cards.

It's actually what I use for my cube because carrying around 720 cards plus 500 basic land plus all the tokens/emblems/etc can be a bit of a hassle.

But yeah, OP got a good deal.