Reddit reviews StarTech.com 25U Open Frame Server Rack - 4 Post Adjustable Depth (22" to 40") Network Equipment Rack w/ Casters/ Levelers/ Cable Management (4POSTRACK25U),Black

Here you go

https://www.amazon.com/gp/product/B00O6GNLQE/ref=ya_st_dp_summary

https://www.amazon.com/gp/product/B00O6GNLQE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I purchased this yesterday, should be here thursday, felt like a good buy.

I'd recommend the StarTech 25U instead: https://www.amazon.com/StarTech-com-Adjustable-Levelers-Management-4POSTRACK25U/dp/B00O6GNLQE

The price isn't that much different and this one is adjustable and looks higher quality.

StarTech 25U Rack Byte My Bits put one together on his channel and he seems to like it

Now, without all the tracking BS!

That said, unless space is an issue, I wouldn't get one that small... You can get that rack's big bro (25U) for $50 more

If you're really planning for the future, and have the vertical space (beware basements!) you can get the biggest bro (42U) for $300.

Sure, one could argue that "I don't need 25U", but the real bite in the ass comes from when you need that 13th U, and it will suddenly cost you a damn decent chunk of change.

I deluded myself that "Oh, this will be enough space" (got the 24U, actually).... Yeah.... ran out of room... got a 32U (42U won't fit), and almost immediately I filled that up too.... wound up making my 24U into my UPS Battery rack....

No one told me this when I started so I'll tell you:

I think we should specify here that "server rack" and "network rack" are built differently. If you want a rack for networking and just the 24 port switch and patch panel, you'd look at something like this. If you're wanting to eventually put a full-length server in, you'll need something like this instead the difference being that the second one is built to support the length and weight of a full server.

Keep in mind when you purchase a server you'll need to buy rails that attach to the rack for it. The server then sits in the extended rails, which slide back into the rack.

Startech makes pretty good stuff, IMO. I've seen them on here before. I have the four post rack that I linked to in the second post and it's served me well. The best thing you can do however, if you have the room, is to jump on craigslist and see if you can find an enterprise getting rid of their rack. Generally those are worth thousands new and the companies are selling them for $40, or something ridiculous like that. I didn't have access to a truck, so that's why I bought mine.

Note that with the large rack you can add networking equipment too, and can also get shelves to support things that aren't rackable.

For power you can either get a rackable UPS or power strip.

Hope this helps. Have fun.

It is this exact one:

StarTech.com 25U Open Frame Server Rack - Adjustable Depth - 4-Post Data Rack - w/Casters/Levelers/Cable Management Hooks (4POSTRACK25U) https://www.amazon.com/dp/B00O6GNLQE/ref=cm_sw_r_cp_apa_i_vvOWCb877H47N


Not too hard to assemble, and it feels really solid.

I got this one (https://www.amazon.com/gp/product/B00O6GNLQE/) after fighting with a cheap one. It's very sturdy and adjustable.

Those are usually APC, Dell, HP, Cisco, etc - commercial grade stuff. StarTech and a few others make consumer and commercial grade products, so generally open racks, 25U, adjustable, rather than only bulletproof sturdy cage/door racks.

Here's the StarTech 25U one I have (I picked it up used off Kijiji though, $80)

Here's a similar one from Tripp-Lite, also 25U open. Don't usually see these in datacenters, because those are all 42U/45U, enclosed.

That being said, the StarTech rack is excellent, as it's adjustable depth, has casters, and a lower profile than something with front/back door + side panels. Depends on budget + needs. I'm in a condo, so having a 42U+ closed rack would be way overkill (and a pain to even get into the elevator...)

Startech makes a 12U and 25U, ranging between 200$ and 240$ or so.

I think I paid 225$ for my 25U , neither is enclosed

How large are you talking? Startech has some decently sized smaller scale racks. $250 for a 25u: https://www.amazon.com/dp/B00O6GNLQE/ref=cm_sw_r_cp_apa_ZQSDzbV66XXJ6

here's what I got. It's 25u open and adjustable for $250. I'm pretty sure monstermuffin had the 12u version of this before upgrading

https://www.amazon.com/gp/product/B00O6GNLQE/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Very solidly built

I bought this one off Amazon brand new for 250 shipped. StarTech 25U Adjustable Depth Open Frame 4 Post Server Rack.

I live in a area that doesn't have a lot of old server equipments so I had to get this one. It's great since it's adjustable depth. And casters are awesome addition as well

I'd say the closest to this that you can buy online would be the Startech racks - https://www.amazon.com/StarTech-com-4POSTRACK25U-Adjustable-Server-Cabinet/dp/B00O6GNLQE/ref=sr_1_3?ie=UTF8&qid=1525558029&sr=8-3&keywords=20u+rack

Standard depth for dell servers is ~30 inches. If you're using the rapid rails they have a range of +-2inches.


I recently got this rack set it to 30 inches and it fits my R710 wonderfully with rapid rails.

1. I'd be looking at a Dell R720xd or something similar. Dual CPUs, 12x drive bays, 2x2.5" internal bays, and plenty of space for RAM. I would set this up with a hypervisor and freeNAS as one of the VMs. Create NFS shares for the other VMs you will create. This will enable all other VMs to have quick access to your data since it's physically on the same machine. If you're going to be backing up multiple computers running Windows you can also create SMB shares in freeNAS easily and access those from your Windows machines. Another option is to run NextCloud on a VM, which is kind of like DropBox. Works great with phones too, as it has a app for Android/Apple to sync up your pictures and other data.
   
   
2. I would go for the Unifi AP-AC-Pro access points. They have great range, power, and speed with multiple antennas to service many wireless clients at once. You can manage these APs in a slick interface called the Unifi Controller. You can install this application on Windows or Linux and manage your wireless networks through the web interface. You can also buy a "cloud key" which basically does the same thing.
   
   
3. CAT6 would be the best if you're looking to future proof. I'd look into at 48 port managed switch so you can segment your network into VLANs. This enables you to isolate your potentially dangerous clients, like guest wireless clients, IoT devices, and other smart devices.
   
   
4. If you want to run cameras on your network, getting a PoE+ managed switch will enable you to power those cameras without having to use a power injector.
   
   
5. I think at least a 24U rack would be sufficient. Don't forget a UPS or two. StarTech USA makes some pretty affordable racks.

https://www.amazon.com/StarTech-com-4POSTRACK25U-Adjustable-Server-Cabinet/dp/B00O6GNLQE

4POSTRACK25U is the model

https://www.youtube.com/watch?v=DJ7Cq5RBcYE&app=desktop

Same as ?

https://www.amazon.com/gp/product/B00O6GNLQE/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1

Are you looking for something enclosed or is a 4 post OK? I couldn't find anything locally that wasn't a 42U and got tired of waiting around. I picked up one of these: https://www.amazon.com/gp/product/B00O6GNLQE/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1

It's depth adjustable - max depth is 40" if I remember correctly. I have mine set in the middle at 34" and it holds my Lenovo RD650 just fine.

There is also a 12U version if you are looking for something smaller.

Man, aren't all of us newbies?

Okay, so for a not-real rack option with high WAF (Wife Acceptance Factor) generally stacked IKEA Lacks are the newbie option. You can get creative but generally mounting with screws is pretty meh, generally it's more or less organized stacking. A slightly better option in the same avenue is the newer Ikea Hejne option possibly pioneered by /u/TheGammel. Just make sure you get the deeper one.

For a DIY solution on the cheapish with casters, TBS blog did a guide on making an open rack that doesn't look terrible as the halfway point for an enclosed rack that's pretty good for only $400-ish (the open is more like 130 assuming you have neither rails nor panels). It looks better than the even-cheaper Home Server Blog one.

As far as other entry level racks go, you're probably looking at a Startech adjustable or similar, assuming you want conveniences like castors for easier maintenance and rear access. Other people ITT probably have other alternatives but it's hard to compete with the TBS DIY cost for a new rack.

This all assumes, of course, that you have a full size server somewhere, and that Craigslist scores from luck and patience aren't an option. IME there aren't a lot of 20-25u deep racks being thrown out by companies like there are the huge 42u or higher ones. If you don't mind there are two-post racks out there, along of course with weird little Ikea RAST mods for shorter networking gear (typically, one guy slapped two together for a longer server).

Star tech one i have: https://www.amazon.com/gp/aw/d/B00O6GNLQE/ref=mp_s_a_1_3?qid=1466349832&sr=8-3&pi=SX200_QL40&keywords=24U+Server+Rack&dpPl=1&dpID=41%2BxHqJOG9L&ref=plSrch

Just search on Amazon: Startech 25u


StarTech.com 25U Open Frame Server Rack - Adjustable Depth - 4-Post Data Rack - w/Casters/Levelers/Cable Management Hooks (4POSTRACK25U) https://www.amazon.com/dp/B00O6GNLQE/ref=cm_sw_r_cp_apa_i_fQoQCbY8WG2FW

Apristel is right got it off amazon. https://www.amazon.com/dp/B00O6GNLQE/ref=cm_sw_r_cp_apa_i_fQoQCbY8WG2FW

option 1: Build your own, you can use wood and add these or something like them to get the mounting holes. this will let you build exactly to the size that you need, and can be done for pretty cheap .

option 2: Startech 25U 4 post rack with wheels

Ah, gotcha.

I have the 25U StarTech one and it's decent. https://www.amazon.com/StarTech-com-4POSTRACK25U-Adjustable-Server-Cabinet/dp/B00O6GNLQE/ref=sr_1_3?ie=UTF8&qid=1522117077

I bought a open frame triplite 25U for around $250 on amazon for my R710 and associated network gear. I'd rather have a enclosure, but they are outside my price range.

Here's a decent open frame starter for around the same price with casters included. I'd have bought this if it was available at the time.

https://www.amazon.com/dp/B00O6GNLQE

With that I bout a bunch of navepoint rack shelf and full length trays for mounting nonrackable gear. Then inherited a few cable management units.

Good plan. I think I'll just order one of these: https://www.amazon.com//dp/B00O6GNLQE/

25U, $250 dropped on my doorstep, and up to 40" of depth.

>https://www.amazon.com/StarTech-com-4POSTRACK25U-Adjustable-Server-Cabinet/dp/B00O6GNLQE/ref=sr\_1\_3?ie=UTF8&qid=1538746126&sr=8-3&keywords=25u+startech

Cheap shelves? not really. I have some spares that I will sell to you for cheap if you pay for shipping. PM me and I can send you pictures.

I can’t say enough good things about this server rack.

StarTech.com 4POSTRACK25U 25U Adjustable Depth Open Frame 4 Post Server Rack Cabinet - w/Casters / Levelers and Cable Management Hooks https://www.amazon.com/dp/B00O6GNLQE/ref=cm_sw_r_cp_api_2p38BbWTEMTBZ

This is the one I have at home. It has cable management hooks. It also comes with casters and levelers which many companies (like Tripp-lite) charge extra for.

It is an open frame rack. It’s expandable and will go much deeper than Dell servers will need. Which is good for future expansion.

When I ordered my first one, the box didn’t include any of the bolts to assemble the rack or the casters or balancers. I called Amazon Business support and they told me that the rack was super heavy and that I could keep it for free and they would send me another one. I then called star tech support and they sent me a free tool kit with my missing stuff. Essentially, I got a second rack completely free because amazon business customer service is super awesome and because the heavy rack would’ve been expensive for them to ship back.

Amazon rocks.

I spent $250 new for a 25U open rack from Startech. I believe it comes with caster wheels, cable management loops on the side. It didn't say with the listing, but it does come with a fair amount of cage nuts and screws. I made the mistake of purchasing some because it wasn't listed. It's also fully adjustable. Also it includes a grounding wire, screw driver and washers.

https://www.amazon.com/StarTech-com-Open-Frame-Server-Rack/dp/B00O6GNLQE/ref=sr_1_3?keywords=startech+25u&qid=1567623107&s=gateway&sr=8-3

​

or

​

https://www.amazon.com/StarTech-com-Open-Frame-Server-Rack/dp/B00P1RJ9LS/ref=sr_1_3?keywords=startech+12u&qid=1567623209&s=gateway&sr=8-3

It's the startech 4 post, 25u rack.

Check out this StarTech rack. I purchased it about 6 months ago and am really happy with it. If you just have half sized cases, the adjustable depth gives you a small footprint now (mines in my office), and the ability to expand it should you pick up a full size case (and having to get a new rack).

StarTech.com 25U Adjustable Depth Open Frame 4 Post Server Rack Cabinet with Casters/Levelers and Cable Management Hooks 4POSTRACK25U Black https://www.amazon.com/dp/B00O6GNLQE/ref=cm_sw_r_cp_api_kB1dAbJ410C9K

Yeah, that's what I was thinking. I have this on my holiday wishlist, but saw this today and thought I could save myself a few bucks.

This is probably what you're looking for...

Startech 25U 4-Post Adjustable Depth

Hi, fellow german here!

If you're ready to shell out some cash I can highly recommend the Startech 25U. Otherwise, as others have suggested, you could build your own or choose the Ikea Lack-rack route, tho I personally would invest in a good rack. You might also find some on eBay (Kleinanzeigen) or - if they don't need to be really deep - you can have a look at thomann.de, they also have some racks (mainly made for holding music gears but works with servers just fine!).

BTW: I think your link is wrong but great that you're looking at KNX systems, can recommend it if you want to do a lot of home automation :)

I'm getting this one xD

https://www.amazon.com/StarTech-com-4POSTRACK25U-Adjustable-Server-Cabinet/dp/B00O6GNLQE/ref=sr_1_1_sspa?s=electronics&ie=UTF8&qid=1519655910&sr=1-1-spons&keywords=server+rack+startech&psc=1

"that expensive" and I was comparing it to those ikea table shit. I actually stated I liked this one.


Cheap startech racks are about 200-250 bucks if you want a small one.

https://www.amazon.com/StarTech-com-Open-Frame-Server-Rack/dp/B00O6GNLQE


No it isn't 60 bucks, but a lot more durable than some raped ikea table.


42U is not in the U range of most DIY-racks, so not really relevant.
But there are good deals out there. I paid 220 (excl shipping, including salestax) euro's, for a 42u new one with mesh doors that had one dented corner (rest was new-new). Not very deep though, but didn't care as I wasn't going to use a backdoor anyway.