Reddit Reddit reviews Sugru Moldable Glue - Original Formula - All-Purpose Adhesive, Advanced Silicone Technology - Holds up to 4.4 lb - Classic Colors 8-Pack

We found 16 Reddit comments about Sugru Moldable Glue - Original Formula - All-Purpose Adhesive, Advanced Silicone Technology - Holds up to 4.4 lb - Classic Colors 8-Pack. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Tapes, Adhesives & Sealants
Sugru Moldable Glue - Original Formula - All-Purpose Adhesive, Advanced Silicone Technology - Holds up to 4.4 lb - Classic Colors 8-Pack
Great for Fixing, Home Improvement, Mounting, Reinforcing, Sealing, Electrical Repairs, DIY, Handicrafts and many moreVersatile: waterproof, heat and cold resistant, durable, removable and electrically insulating up to 24vNo mess: non-runny formula for quick and easy applicationStrong: holds up to 4.4 lb (2 kg) on Glass, Ceramics, Wood, Metal, Plaster, most Plastics and Fabrics (and more), indoors and outdoors - no need for drilling!Contains 8 x 5g (0.17 oz) single-use packs of Sugru Original Formula in Black, White, Red, Yellow & Blue
Check price on Amazon

16 Reddit comments about Sugru Moldable Glue - Original Formula - All-Purpose Adhesive, Advanced Silicone Technology - Holds up to 4.4 lb - Classic Colors 8-Pack:

u/Foxtrot_Alpha_Papa · 8 pointsr/techsupportmacgyver

Use this connector into the port.
https://www.amazon.com/YCS-Basics-Micro-female-extension/dp/B00HAOK7XE/ref=pd_sim_147_9?_encoding=UTF8&pd_rd_i=B00HAOK7XE&pd_rd_r=1K7Y8KM8CCG3NA9TRDK3&pd_rd_w=3MLQx&pd_rd_wg=S0wfJ&psc=1&refRID=1K7Y8KM8CCG3NA9TRDK3

Use some epoxy or gorilla glue to bead around the connector between the controller and now you have a short little dongle that weighs next to nothing hanging off but keeps the controller wireless when needed. Do the epoxy in a few coats, don't just glob it on there super thick, it takes forever to get strong then. I recomend against super glue, it will just make a mess.

You can use this to make it look prettier if you want as well.

https://www.amazon.com/Sugru-Moldable-Glue-Classic-Multi-Color/dp/B008URBC9I/ref=pd_lpo_vtph_60_bs_t_2?_encoding=UTF8&psc=1&refRID=GEHJJR1SV07J2VYRE363

u/Neurexine1 · 5 pointsr/Damnthatsinteresting
u/FSMonToast · 5 pointsr/MechanicAdvice

Use sugru

Sugru Moldable Glue - Original Formula - Classic Colors 8-Pack https://www.amazon.com/dp/B008URBC9I/ref=cm_sw_r_cp_apa_FBxNBbD4XG9MZ

u/timmytheignorant · 3 pointsr/balisong

Its some stuff called Sugru.

u/jwolfera · 2 pointsr/DIY

I have seen in the past people user https://www.amazon.com/gp/product/B008URBC9I/ref=ox_sc_sfl_title_18?ie=UTF8&psc=1&smid=ATVPDKIKX0DER to build up the areas around the failing plastic.

u/_Acid · 2 pointsr/trees

It should work with the slant. From what i can see in the picture it seems a grommet would fit perfectly in that hole. Once you get the grommet in, if you want an added layer of hold(on the downstem/the grommet) wrap over the grommet with some Sugru. Some people will probably tell you not to use sugru because of the lower temperature threshold, however I wouldn't worry too much because the downstem/grommet won't be getting too hot from smoking a bowl.

u/Raider1284 · 2 pointsr/oneplus

This is sugru! http://www.amazon.com/Sugru-SMLT8-Hardware-Sealer-8-Pack/dp/B008URBC9I

pretty cool stuff that you mold by hand and it cures at room temperature.

u/NewToKitchener · 2 pointsr/DIY

Start by superglueing a ring (washer? Metal loop?) To the adapter. Then use some Sugru to form a prtective layer/case. http://www.amazon.com/Sugru-Moldable-Glue-Classic-Multi-Color/dp/B008URBC9I

this stuff is fun!

u/Itihaun · 2 pointsr/headphones

Superglue on the nosepads?

​

Edit: im obviosuly kidding. For real tho, you could try to modify the temple tips (of the glasses) with Sugru, or some simular moldable rubber. Then form fit these to catch on the earpads of the headphones. My mate did this for his computer glasses.

​

Sugru: https://www.amazon.com/Sugru-Moldable-Glue-Original-Formula/dp/B008URBC9I

u/backagainonreddit · 1 pointr/india

I recently bought sugru, it is ₹1799 on Amazon
http://www.amazon.in/gp/aw/d/B008URBC9I/ref=mp_s_a_1_1?qid=1462104235&sr=8-1&pi=SY200_QL40&keywords=sugru&dpPl=1&dpID=51tXzF8FP4L&ref=plSrch

On the US Amazon website it is $22 which is about ₹1500. Not too bad if you ask me. In most countries, uncommon/exotic things will be more expensive. Pay up and move on

u/indieslap · 1 pointr/analog

You could get some Sugru. Its pretty much putty but super strong. I have the same problem as you with my glasses, but I haven't gotten around to doing so. When I get a chance I'll post my results to your comment.

u/russdr · 1 pointr/Surface

What I ended up doing was buying this stuff:

http://www.amazon.com/Sugru-SMLT8-Hardware-Sealer-8-Pack/dp/B008URBC9I

I got the black rubber compound and wrapped the end to support the head. I made sure to press the head into the charger port to ensure the head would be flush when the compound cured. It worked perfectly.

u/vic06 · 1 pointr/fountainpens

Happy to help! Target sells it, if you want it locally. You can buy online from Sugru or Amazon
You can search for nearby retailers a full list on Sugur's site.

u/po2gdHaeKaYk · 1 pointr/MotoUK

I think I understand your issue. What you're saying is that there is something about the construction of the C3 helmet which makes it difficult to wedge the clamp mechanism in.

There is discussion about this issue here. Post #23 explains it clearly.:

> I have the C3 Pro, and don't know the C3 at all. With the C3 Pro there is an internal collar that goes around the inner perimeter of the helmet. The collar is mounted to the perimeter very tightly. If you have C3 Pro you surely know what I mean. Anything that's mounted on the edge of the helmet will interfere with this collar. So the collar must be cut to mount the 20S unless you use the adhesive method. Hence, I chose the adhesive to minimize the damage.


If I understand the issue well, then you have two options. You can either use an attached adhesive mount (I am not sure what is included with the camera), or you can use a product like Sugru which is a type of rubber that sets (which can be removed by cutting afterwards). I use Sugru to attach my GoPro to my chin vent. It works very well and is very easy to do.

Edit: According to the thread I linked above, people are saying that it can also be done by installing the clamp near the rear, and then pushing it into the front. There is also a reply by Sena customer service on this issue, which suggests that it may be made easier if there were thinner foam pads included with your package.

Regardless of the nature of whether it is possible for you to squeeze it through from the rear, I still highly recommend the Sugru option. It is waterproof, heat resistant, can be molded and removed easily, and costs £2 a pop.

u/Stratocast7 · 1 pointr/JeepRenegade

I used Sugru. I used yellow so it matches my paint. Also I bought a frame for the license plate and secured that down with the see Sugru so I can take off the plate if needed.

Edit: this is what I used, Sugru Moldable Glue - Classic Multi-Color (Pack of 8) https://www.amazon.com/dp/B008URBC9I/ref=cm_sw_r_cp_apa_w6fizbDVADAAA

I bought the bigger pack because I can use it for other projects but you can buy smaller/ cheaper packs.