Reddit Reddit reviews Super Lube 51010 Oil Super Lube,Translucent white

We found 13 Reddit comments about Super Lube 51010 Oil Super Lube,Translucent white. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Power Tool Parts & Accessories
Power Tool Lubricants
Power & Hand Tools
Super Lube 51010 Oil Super Lube,Translucent white
Synthetic oil with suspended Syncolon (PTFE) particlesWaterproofUSDA/NSF Rated H-1Reduces friction and wearExtends machinery and equipment life
Check price on Amazon

13 Reddit comments about Super Lube 51010 Oil Super Lube,Translucent white:

u/khanable_ · 6 pointsr/ender3

Outside of the things others have mentioned (springs, tubing, couplers, SKR, BMG, etc.) - if you don't already have some good tools/spare parts you can use this time to invest in some.

u/AnAppleSnail · 3 pointsr/flashlight

http://www.amazon.com/gp/aw/d/B000BXOGHY

I bought one or two from Radio Shack a few years ago. The pen applicator is pretty handy.

u/light24bulbs · 3 pointsr/prusa3d

Ooh it's four dollars! Ordered. Super Lube 51010 Oil Super Lube https://www.amazon.com/dp/B000BXOGHY/ref=cm_sw_r_cp_apa_i_EdI0DbKX6MN0W

u/dtrav001 · 3 pointsr/hardware

I have cleaned and repaired many. First get the dust and dirt off. Then, if you find a center hub covered by a cap or thin plastic sticker, remove to expose the bearing. Then a drop or two of this stuff, and you have a good chance of resurrection. Praise grid.

u/Uhdoyle · 2 pointsr/vinyl

Super Lube 51010 https://www.amazon.com/dp/B000BXOGHY/ref=cm_sw_r_cp_api_i_Cn8OCb5WJ71QT

You’ll want to add a drop to the horizontal pivot point inside that angled round donut part.

Edit: red line is the imaginary axle. Apply lube to points marked by yellow arrows https://imgur.com/a/ZlmV6Uw

u/spncrbrry · 2 pointsr/Throwers

yes that 3in1 will do fine, but thicker will be more responsive and last longer.

You can melt vaseline into a bearing with a lighter - hold the bearing on the end of a pencil or something you don't care about burning a bit. Make sure you only do this if the bearing is all metal.

"Brain Lube" is the best, imo - this is the same stuff https://www.amazon.com/Super-Lube-51010-Oil/dp/B000BXOGHY/ref=sr_1_3?s=hi&ie=UTF8&qid=1499211271&sr=1-3&keywords=super+lube+ptfe

Mineral spirits cuts the oil - distributes it more evenly and thinly - so adding it to your lube makes it less responsive.

u/[deleted] · 1 pointr/Throwers

for heavy, I use super lube with PTFE https://www.amazon.com/gp/product/B000BXOGHY/

u/SirTimmyTimbit · 1 pointr/MechanicalKeyboards

I'm getting my YMD96 kit delivered on Thursday. I want to clip and lube my stabilizers based on Kim's video.

I can find Dielectric Grease locally here in Toronto but I can't find any Finish Line Teflon Grease, or any other teflon grease for that matter.

Ordering 205g0 will take 6-10 days from Apex. Here are my other, immediate options:

u/Tkf530 · 1 pointr/motorcycles

I was able to spray some lubricant on the key itself to turn it so I can start it for an oil change. Do you think this product will work? https://www.amazon.ca/dp/B000BXOGHY/ref=cm_sw_r_tw_apa_i_FLYXDbJX1G6C9

u/heloitsame · 1 pointr/MechanicalKeyboards

hey friends! would either of these be good for switch lube? going for hako clears/tealios if that matters, thanks!

edit: canadian, so id have to pay an arm and a leg for krytox/tribosys

edit2: or if you have other suggestions, im open to them!

u/Infinity_z · 1 pointr/3Dprinting

So stuff like this? Also, how do you apply grease/lubricant to the bearings? The rails/worm gear I’m assuming it’s directly applied, then the axis is moved up/down/left/right to apply throughout.


Zoom-SPOUT Sewing Machine Oil Oiler ~ 4FL. OZ.(118ml)
https://www.amazon.com/dp/B00BYCKTW2/ref=cm_sw_r_cp_api_6cPJBb3ZHQ8QH

3-IN-ONE Multi-Purpose Oil, 3 OZ
https://www.amazon.com/dp/B0002JN5PG/ref=cm_sw_r_cp_api_HcPJBbYNBTFVR

Super Lube 51010 Oil Super Lube
https://www.amazon.com/dp/B000BXOGHY/ref=cm_sw_r_cp_api_DdPJBbVT5E89G

Super Lube 21010 Synthetic Grease (NLGI 2), Blistered, ½ oz Tube
https://www.amazon.com/dp/B000BXKZQU/ref=cm_sw_r_cp_api_-dPJBbN0D6KVT

u/subcat · 1 pointr/MechanicalKeyboards

I read that Hypersphere (guy who makes the Topre silencing rings of the same name) uses Super Lube 51010 to lube his Topre switches. Is there anything wrong with this lube that I should know (not plastic safe, wrong viscosity, etc.) before I order some?

Also, how long after using a keyboard should I lube it? A year or so?