Reddit Reddit reviews Tamiya America, Inc Basic File Set, TAM74046

We found 16 Reddit comments about Tamiya America, Inc Basic File Set, TAM74046. Here are the top ones, ranked by their Reddit score.

Toys & Games
Dress Up & Pretend Play
Kids' Costume Accessories
Tamiya America, Inc Basic File Set, TAM74046
Includes 3 Double-Cut Files: Round, half-round and Flat.Tamiya Quality and Precision16cm in lengthSuitable for working plastic and soft metals
Check price on Amazon

16 Reddit comments about Tamiya America, Inc Basic File Set, TAM74046:

u/MachNeu · 3 pointsr/Gunpla

Are those finer than the basic set that tamiya has? I've been using the basic set here https://www.amazon.com/dp/B000BMUONA/ref=cm_sw_r_cp_awd_jiIBwbRBX5X36 and I can't tell from the photos on Amazon if they're different. I'm assuming finer.

u/Vyle8 · 3 pointsr/minipainting

I use a file set to get rid of most of them. Blade are great, but sometimes they are just too fat to get into the little spaces.

https://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA

u/overthemountain · 3 pointsr/KingdomDeath

It takes a lot of time. You need the right tools. Id' have an exacto knife, some clippers, some files, a good glue, and probably some gap filler. Oh, and a cutting board to work off of.

I linked some examples to give you an idea, you can feel free to find a particular product that works for you, although I do really like the Tamiya glue. There are a lot of little pieces so some people might like some tweezers as well. I use cupcake wrappers to help keep the pieces in one place as I'm assembling and keep them from getting lost. I'd recommend not working over carpet as a dropped piece might get lost forever in there.

As others have said, Vibrant Lantern has some great build guides, which are probably required for more complex models like the Phoenix.

Otherwise, don't let the amount of sprues overwhelm you. Pick a miniature to assemble and finish it before moving on to the next one. Most of them are fairly straightforward. I would really recommend you take your time in assembly, as getting the edges filed and gaps filled will pay off in the long run - nothing worse than a well painted model with gaps and mold lines showing. There are plenty of videos out there on how to do this if you aren't sure or just want some additional instruction.

Start with the White Lion and starting survivors. The Screaming Antelope and Butcher will be the next ones to tackle. All of these are fairly easy to assemble.

u/thelefthandN7 · 2 pointsr/Warhammer40k

Most of those look too coarse. Also, kind of pricey. Try these by Tamiya.

u/MSZ-006 · 2 pointsr/Gunpla

Honestly... at face value the kit looks okay but it probably comes with a lot of cheap crap you might not care about. I saw this in the similar section and I reckon that's enough if you wanna save a few more bucks and are keen on a set.

But if you're already willing to spend $20-30 then you can get what I suggested within that budget along with the knife you linked to (this and this, there's a few sellers for each you can get via Prime). That and some sandpaper from your hardware store and you'll be good to go dude.

Ultimately don't worry too much about the tools. You can make do with just sandpaper, a hobby knife and a crap pair of wire cutters and still do fine. Hell, that's all I had when I was a kid lol :P

u/Saber_Avalon · 2 pointsr/Gunpla

In that case, have you tried using a file? Something like these: https://www.amazon.com/Tamiya-America-Basic-File-TAM74046/dp/B000BMUONA

I generally only use the one on top in the image. It's flat on one side and rounded on the other. Depending on the nub location I'll use either side, flat if there's a larger piece of nub then switch to the rounded side as I get closer to the part. I find the rounded part helps to avoid filing away the part itself as you get closer to it. The tapered end is good for tougher to get to places.

I've used the fully rounded one once and the big squared off flat one I almost never use. I find I end up scratching the part with it.

u/Shenaniganz08 · 2 pointsr/Gunpla

Additional tools I would add if you have more money

Assorted Sandpaper $5 will last you a long time if you cut the strips. 800 and 1000 is all you need

Tamiya Model File set $9, You really only need the flat one

For decals
Q-tips for applying decals, I recommend you get two sizes ( i like the mini ones since they have less hairs)

Self healing cutting mat

Mr Mark Setter and Mr Mark Softener for rounded edges

u/huxtiblejones · 2 pointsr/Gunpla

Congrats! Keep us posted, it's always fun to see how peoples' journeys differ. I picked up a $9 set of files from Tamiya and it changed my skills almost instantly. They remove nubs much faster than any sandpaper, if you can get ahold of them I'd recommend also grabbing a higher grit sandpaper pad as well from a hobby store. Do a rough cleaning with the metal files then clean it up with increasingly higher grit sanding pads.

You can get seriously clean models if you use these tools right.

u/Vonderboy · 1 pointr/Gunpla

I use hard Wave sticks too and love them. They sand very flat (something I liked files for) but are quite gentle on the plastic in terms of deap scratches. BUT for some reason the 800 grit is disconnected like in your link. Anyone know where else you can get it?

In terms of files I have the Tamiya basic , Tamiya fine basic , and a (hopefully) nicer plastic hobby file on order just to try. Files are nice for larger jobs like serious molding flaws (not common in Bandai kits) and the fine ones are OK for nubs but still quite rough compared to any sanding stick. Although, as you know I'm sure, files last forever and require much less effort and time to chew through plastic. I'm hoping the plastic file is the Holy grail and is a good balance. I bought a set of needle files and diamond files from harbor freight and they blow. The trash just don't grip or cut don't waste your $3.

And as a reference I own Revell, squadron , nail buff sticks, and have made my own sticks from automotive sand paper. The nail files are way too rough imo, making my own is a pain, and while the squadron sticks are nice I mainly only used the tri-grit while I used all the Revell except the roughest and are probably the best value imo. I still use the other more flexible kinds but dramatically prefer wave. Wish the 800 grit still were available.

Long post sorry. Hope it helps

Edits: spelling, phrasing, and lots of links

u/SyNiKaLiTy · 1 pointr/Gunpla

Yea i saw this under the recommendation with the tamiya nippers. Thought it might be a good buy, still undecided and processing all the input.

http://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA/ref=pd_bxgy_21_img_3?ie=UTF8&refRID=0HVB95284PC6SJSVYT0Y

u/NoCitationNeeded · 1 pointr/Gunpla
u/fxakira · 1 pointr/Gunpla

This should be a better quality purchase. I have the tamiya files and use them frequently when I remove nubs prior to sanding. With metal files, my advise is to not OVERDO it - after shaving with a hobby knife, a few passes with the file is necessary to completely level the nub. If you overdo it, you will scrape off excess plastic. Just be careful :)

u/Mr_Greed · 1 pointr/Gunpla

I was looking at a set of files from Tamiya. Would this be a good set as apposed to sand paper?

u/ChicagoCowboy · 1 pointr/Warhammer

Dremmels are great with the right attachment - but I actually just use a set of files like these that are really effective and cheap. The squared off flat one is perfect for filing slightly uneven edges so that pieces meet up better - I use them extensively when modeling forgeworld models and tanks.

You can also use a nail file/emery board, though the hard plastic/resin will wear the emery board down much faster than the nails that they're made for.

Its literally as easy as trying to match up the sides, noting where the biggest protrusions are that are keeping it from being flush, then filing those parts down flat with a couple strokes of the file, re-aligning, repeat until they sit flush.

What model are you working on, and which parts specifically aren't matching up? I might be able to lend more specific advice.

u/heeroyuwee · 1 pointr/Gunpla

Sandpaper is really cheap at the hardware store, just get some varying grits (i go up to 1500). If you want files, you can probably find some good hobby ones, I use the tamiya file set. If you are going to be disassembling your kits for painting or whatever reason, spudgers are very helpful. Definitely top coat, Krylon Matte and Clear top coats are good, there are more hobby specific coats that are very good, but more expensive. Panel lining supplies are also good, either pens or ink for a panel line wash. Alligator clips on sticks are also handy if you are going to be top coating