Reddit reviews TANGRAM Folding Pocket Knife 3.35 inches Drop Point Sharp Blade Liner Lock Black G10 Handle Knife,AZO Santa Fe TG3002A1
We found 8 Reddit comments about TANGRAM Folding Pocket Knife 3.35 inches Drop Point Sharp Blade Liner Lock Black G10 Handle Knife,AZO Santa Fe TG3002A1. Here are the top ones, ranked by their Reddit score.
【Great Budget Knife】For the Quality,Size,Blade Steel,Durability,Desigh,Actually it is a Best choice.Blade length:3.35inch;Handle Length:4.2inch;HRC:58;Weight:3.38oz As a 3 inch knives,You may not feel it in the pocket.【Deep Carry Pocket Clip】The pocket clip is tip-up left or right & is the deep-cover style. No discomfort putting hand in pocket while clipped there.【Good Feeling Handle】G10 handle is comfortable and easy to use for long periods of time,4.2inch Handle is Just Perfectly hold in Hand.【Acuto 440 Stainless Steel】The Blade Center perfectly made by JPN Acuto 440 Steel,an adjustment of 440c and have a Better performance Outperform 440c,8cr13MoV, Aus8, etc.865 cuts until dull,You Can Take About 8 Weeks.And another surprise Acuto440 is Easy to sharp.【Surprise Smooth Action】 Phosphor bronze washers instead of cheap nylon/Teflon washers gives it a smooth open/close action
I'm going to recommend a few knives to get you started:
Total price: $59.81. These three knives would be an excellent start to the addiction. The Tangram is probably the best made knife in that price range of any knives I've handled. The Opinel 6 is an absolute classic and would be perfect for situations where you want something light and inoffensive. The Victorinox Classic SD is one of the most useful little tools out there, especially those tiny scissors.
$30 is a great deal for a Tenacious these days. However, if you want something a bit more pocket-friendly then here is something to consider:
https://www.amazon.com/Tangram-Folding-Pocket-inches-TG3002A1/dp/B075N689CH/
Tangram Santa Fe
https://www.amazon.com/gp/aw/d/B075N689CH/ref=sxts_1?ie=UTF8&qid=1511217739&sr=1&pi=AC_SX236_SY340_QL65
Here are a few options:
Tangram Santa Fe
Kizer Dukes
Ontario Rat 1
Steel Will Cutjack
I'm going to say the Tangram line by Kizer is a good way to go. Sub $50, with a few good options. My personal favorite is the Santa Fe, which is a 3.35" blade, with G10 handles, and an Acuto 440 blade. Mine has held up great so far, and it's plenty light.
EDIT: Here is an Amazon link. It's plenty under budget, and my favorite budget knife overall.
I would check out a [Ruike](RUIKE RKEP801SF P801 Framelock Knife https://www.amazon.com/dp/B06XD65VQF/ref=cm_sw_r_cp_apa_JSsRAb0G5DC06), [Ontario Rat 2](Ontario Knife OKC Rat Ii Sp-Black Folding Knife, 7Inches https://www.amazon.com/dp/B00BBPAOCW/ref=cm_sw_r_cp_apa_uTsRAbT3STB78) or [Tangram Santa Fe](Tangram Folding Pocket Knife 3 inches Drop Point Sharp Blade Liner Lock Black G10 Handle Knife,Azo Santa Fe TG3002A1 https://www.amazon.com/dp/B075N689CH/ref=cm_sw_r_cp_apa_gUsRAb4KZF806) before either of those tbh. Unless you just want it to be assisted.
Edited to add links.
The Tangram Santa Fe has been getting rave reviews for $30. The fit, finish, and action are reported to be comparable to much more expensive knives. Other Tangram models also seem to be quite good, though the Santa Fe is the most popular. Tangram is a brand of Kizer, which sells much more expensive knives under its own name.
The steel it uses seems to have better edge retention than most of what's seen near this price point as well as very high corrosion resistance. D2 is seen in some budget knives and has better edge retention, but is hard to sharpen without diamond abrasives, and is not very corrosion resistant - some call it "semi-stainless".
----
Ruike is another $30 option worth a look. Their P801 is probably the most popular model. It's a steel framelock flipper on bearings for a very smooth and satisfying action. I also like the P865-B for its blade shape and very good ratio of length to weight. Some other models have interesting secondary locks that can be manually applied for extra safety.
Ruike knives use 14C28N steel, which also has above-average edge retention for this price point. The big upside though is sharpenability. It's easier to get 14C28N extremely sharp than it is most steels. Ruike is owned by Fenix Lighting, in case you're familiar with their flashlights.
Since you like the Sheepdog with its sheepsfoot blade, I'd suggest a Tangram Santa Fe as a good starter knife. It's regarded to be a great value for the price, and well built knife overall. The CRKT Pilar might be another good choice for entry level.