Reddit Reddit reviews TEKTON 2841 Everybit (TM) Ratchet Screwdriver, Electronic Repair Kit and Security Bit Set, 135-Piece

We found 20 Reddit comments about TEKTON 2841 Everybit (TM) Ratchet Screwdriver, Electronic Repair Kit and Security Bit Set, 135-Piece. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hand Tools
Screwdriver Sets
Power & Hand Tools
Screwdrivers & Nut Drivers
TEKTON 2841 Everybit (TM) Ratchet Screwdriver, Electronic Repair Kit and Security Bit Set, 135-Piece
Every bit for every project: 105 screwdriver bits and 22 precision bitsRatcheting screwdriver has forward, fixed, and reverse drive positions and a comfortable, nonslip rubber gripA full range of security drive types and sizes fit just about any tamper-resistant fastener you run intoSpecifically designed for repairing mobile phones, tablets, laptops, computers, game systems, wristwatches, and eyeglassesIncludes pentalobe bits for iPhone and MacBook
Check price on Amazon

20 Reddit comments about TEKTON 2841 Everybit (TM) Ratchet Screwdriver, Electronic Repair Kit and Security Bit Set, 135-Piece:

u/wytrabbit · 13 pointsr/PS4

> Instead of buying a single 00, id recommend the whole iFixit screwdriver kit. $30.

https://smile.amazon.com/gp/product/B008HYVG6I/

135 piece TEKTON set with more than double the bits and almost the same price.

u/1bentpushrod · 10 pointsr/Tools

Allen wrench / hex driver set. This one is overkill, but you'll probably not ever need another bit unless you lose them.

u/DepressedElephant · 3 pointsr/watercooling

I REALLY wish they didn't even mention pliers. It's the wrong tool for the job. They might as well have told people to use a sawzall and just be really careful..

A full set of tools that covers every possible fastner is $30. There is no excuse to not have the right tool for working on a $700 piece of fragile hardware.

https://www.amazon.com/gp/product/B008HYVG6I/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/rookless · 3 pointsr/Tools

I like a lot of Tekton tools, particularly their "Everybit" set. Great value, and it has a lot of security style bits you would need for disassembling electronics.

http://www.amazon.com/TEKTON-2841-Electronic-Screwdriver-135-Piece/dp/B008HYVG6I/ref=sr_1_1?ie=UTF8&qid=1425168318&sr=8-1&keywords=tekton+every+bit

Other than the everybit set from Tekton, here is a list of tools I would recommend for general use...

  • Adjustable Wrenches
  • Large slip joint pliers
  • small slip joint pliers or linesman's pliers (or both)
  • Locking Pliers (Vise Grip)
  • 8in (or around that size) diagonal cutter
  • Hex keys
  • Some sort of heavy duty shears or scissors, (Yellow handle Wiss Snips are a good choice)
  • Straight claw hammer (personal choice, i think straight claws are more versatile than curved)
  • A Drill with a plug. If you're going to buy a battery powered drill than you don't cheap out.
  • Drill bits. Any cheap set should do, as long as it has a 1/8 in and 1/4 inch bit somewhere in there.
  • A utility knife and a few spare blades (I can accomplish great things with a sharp utility knife)
  • a small putty knife
  • a 1 inch wide chisel
  • Sandpaper (80 grit, 120 grit, and 220 grit.)
  • Gorrilla Glue
  • Super glue
  • A hack saw with a few different blades
  • Hot glue stick and a lighter (hot glue guns are for people with too much time on their hands)
  • Blue painters tape (Light duty, leaves no glue residue)
  • Duct Tape
  • assortment of screws, nails, fasteners and wall anchors.

    I could continue this list forever so I'll just stop here. I have specific brand recommendations for almost all the tools on my list, but I wanted to keep it generic so that you could do your own unbiased research.

    In addition, if you really just want to get your hands dirty, you can accomplish a lot with a good quality multi tool. I recommend the Leatherman Wave. The leatherman will set you back $60-$70 but I think they're more than worth the investment. If you buy a multitool, you could probably almost cut my list in half.
u/TheLightingGuy · 3 pointsr/sysadmin
  • Company Laptop and cell phone (I'm not actually counting this as the 5. This should be a given obviously)

  • M.2, mSATA and SATA drive adapters (Your environment may differ)

  • Fluke LinkSprinter (I think these may be under the Netscout name now)

  • Flash Drive o software tools (Network share works unless the computer you're working on has some weird ass virus)

  • This Toolbox

  • Network toolkit with quality RJ45 and Punchdown jacks)

  • Label Maker

  • Travel Mug, But you take that with you anyways right? RIGHT?
u/pabloe168 · 2 pointsr/buildapcsales

Prying tools, a nice screwdriver, small spatulas a grounding bracelet and a nice case. $50? Fuck no.

this is just ok. For $60 you can get your self your last toolkit. This is the center piece the last screw driver set you will ever buy: http://www.amazon.com/gp/product/B008HYVG6I/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

pry tools aren't common but they diabolically cheap: http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR12.TRC2.A0.H0.Xpry+tools&_nkw=pry+tools&_sacat=0

grounding bracelets are $5 bucks across the board, and you can get a nice bag for all your tools.

http://www.amazon.com/gp/product/B000BFNJES/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A37XNGS4WH2DDR

If you are barely starting gearing up throw in, a wire stripper, a soldering iron with 21G solder, flux, a pump and solder remover.

Some time down the road, throw in an internet cable crimper some internet cable connectors and have the power of fixing any cable at any lan party.

Throw in a magnetic nut and bolt tray, spare 21g wire and your set for life.

If you want you can add, a small axe, flashlight, a pack of batteries, quarter bottle of vodka, and a magnesium rod. It will bring the cost to like $150 2014 dollars but this set will make you the most popular kid in the fallout and will guarantee unlimited bottle caps.













u/ChronoKing · 2 pointsr/AskElectronics

This is what I picked up some years back. That "mini-kit" you see in the middle is what I use to open up my cell phone (T3 screws). The large driver is ratcheting and can store bits in the handle. Haven't stripped any of the bits after 3 years of light to moderate use.

u/phillibl · 2 pointsr/buildapcsales

This TEKTON kits is a bit cheaper and has better case. Lifetime warranty but doesn't include the pry tools, those are super cheap though.

u/ISNT_A_NOVELTY · 1 pointr/techsupportmacgyver

I bought this a few weeks ago and I have already found it extremely useful: http://www.amazon.com/gp/product/B008HYVG6I/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

It has most (if not all) of the bits in yours plus a whole bunch of super tiny bits for things like glasses. Within the first week I found a use for a star bit (my laptop) and a square bit (removing an old ceiling light fixture that used square screw heads for some reason. You could tell that whoever installed it tried to use a slotted screwdriver because the screw heads were totally fucked up).

Just be careful with the smaller bits because it is really easy to put a fuckload of torque on them with a great big grippy handle. The bits themselves are fine, but you might fuck up the threads in whatever you are screwing (experience talking, ruined one of the screws on my laptop by tightening it too much).

The downside is that it is more expensive. It has a lifetime warranty, though, so if you ever break a bit, they will send you a new one no questions asked (just read the manufacturer replies in the comments to see this).

u/Kroan · 1 pointr/computertechs

I have liked this Tekton 27 piece set for a while. I mostly like it because it comes with both size pentalobe bits, if you're doing any apple repair stuff. It comes as part of their 135 piece set too, which I think is a good deal. Reach isn't very long is the only real downside.

u/taj1994 · 1 pointr/airsoft

If you buy a new screwdriver set, I recommend this one (American link, since I'm Canadian). It has everything that I've needed so far, plus more.

u/mjh215 · 1 pointr/techsupport

Depends on how much you want to put into it. Wera, Bahco, Bondhus (for hex), Wiha, etc. Wiha probably makes the best all around, either separate screwdrivers, interchangeable shafts, or bits but I've had issues with Wiha USA so I personally look elsewhere now. But if I'm being honest with myself, I'd have to point you in that direction.

A decent rule of thumb, particularly for precision tools, is to look at the country of origin. German, Japanese, Swiss and USA made tend to be your best bet. Wera is German but has fair amount made in Eastern Europe, not China.

If they seem a bit too expensive I recommend getting really good quality for the bits/drivers you use most often and then keep a cheaper master set. That is what I do right now. I have this set https://www.amazon.com/TEKTON-2841-Screwdriver-Electronic-135-Piece/dp/B008HYVG6I/ and a variety of Wiha, Wera, et al. in more common sizes.

u/programming_monkey · 1 pointr/maker

This Tekton set is my favorite and it's not too expensive and should cover at least all of your driver bit needs.

u/Connorthedev · 1 pointr/Tools

If you want a bit type, id recommend starting with this 23 Pc Husky ratcheting precision set which covers every computer/laptop need I've run into. Or this TEKTON Everybit set.

For individual type I recommend the TEKTON Brand. Here is a set that has the PH0-PH2 like you need and some other flat heads. Torx Here, Nut Drivers Here. Though you can filter the nut drivers into SAE/Metric or buy by individual need.

If you really need/want magnetic tips, sub that screwdriver set i sent with something like this Cause magnetic tips are handy. Another brand I highly recommend is Milwaukee for both insulated and non-insulated drivers

u/MorleyDotes · 1 pointr/motorcycles

I'm not a theif but I have an Every Bit Kit that has pretty much any bit I'd need to steal something.

u/SodaAnt · 1 pointr/Multicopter

The hobbyking hexes work well enough on their own. I personally just have this kit, it seems to work for pretty much everything: http://www.amazon.com/TEKTON-2841-Electronic-Screwdriver-135-Piece/dp/B008HYVG6I/ref=sr_1_3?ie=UTF8&qid=1397017140&sr=8-3&keywords=tekton

For a soldering iron, I'd get a Hakko 888 if you have enough money, or a hakko 936 clone if you do not.

All anti-vibration form is not the same. Some is better than others, but there are a lot of variables to take into account.

As for the oscilloscope, I'd say its pretty darn low on the list. A good scope is expensive (~>$300). They are quite easy to learn how to use, and can be quite useful, but I generally wouldn't purchase one if all you wanted to do is build a quadcopter or two.

u/Cravemonic · 1 pointr/buildapcsales

Good alternative to this is Tekton 135 piece set


Only downside in this set is that every bit is not magnetized and among this set, there're no triangle bits. Tekton put it in their other set, which you don't even need just for a triangle bit.