Reddit Reddit reviews TEMCo Kanthal Wire 28 Gauge - 100 FT 0.61 oz Series A-1 Resistance AWG

We found 29 Reddit comments about TEMCo Kanthal Wire 28 Gauge - 100 FT 0.61 oz Series A-1 Resistance AWG. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Electrical Equipment
Electrical Wire
TEMCo Kanthal Wire 28 Gauge - 100 FT 0.61 oz Series A-1 Resistance AWG
28 AWG, Average wire diameter: 0.0126 in. (0.32004 mm), 5.27 Ohms/ft at 68°FALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Check price on Amazon

29 Reddit comments about TEMCo Kanthal Wire 28 Gauge - 100 FT 0.61 oz Series A-1 Resistance AWG:

u/Chreeeees · 6 pointsr/Vaping

Using Amazon links only...

My favorite RDA right now (although I own the authentic, this should be good enough, as I've never really had issues with clone RDAs): http://www.amazon.com/Vulcan-RDA-Clone/dp/B00OWKB3GE/ref=sr_1_2?ie=UTF8&qid=1420579323&sr=8-2&keywords=vulcan+rda Also look at TOBH Atty v2.5, Plumeveil, and Mephisto. All good clone atomizers!

As for mods, it pretty much comes down the which one you find aesthetically pleasing. Some off the top of my head you can look for are Nemesis, Stingray, Stingray X, Caravela, 4Nine... They often come in varying finishes (stainless being the most common, but you'll also see gold, copper, black). Nemesis and 4Nine tend to be on the cheaper side, but I found this Caravela for only $21.99 on Amazon for you: http://www.amazon.com/Caravela-Mechanical-Clone-Stainless-Steel/dp/B00OBUD6SS/ref=sr_1_10?s=miscellaneous&ie=UTF8&qid=1420579698&sr=1-10&keywords=mechanical+mod

Then I would recommend picking up one or two 18650 batteries, either Sony VTC4 or Samsung 25r (I own and use both). Rolled organic cotton from CVS pharmacy (will last you years), kanthal wire for rebuilding your coils (I use Temco: http://www.amazon.com/TEMCo-Kanthal-Wire-Gauge-Resistance/dp/B00FBSVQX6/ref=sr_1_3?ie=UTF8&qid=1420579851&sr=8-3&keywords=kanthal+26g ), and an ohm meter to ensure safe builds: http://www.amazon.com/Resistance-Reader-Meter-Rebuilding-Atomizer/dp/B00KI0BMMC/ref=sr_1_1?ie=UTF8&qid=1420579903&sr=8-1&keywords=ohm+reader

Hope this helps! Btw, Youtube is your FRIEND! How I learned everything, just watched videos for whatever I was looking to do.

u/MMMMmmmmmMMMMMbitch · 6 pointsr/electronic_cigarette

Fuck buying kanthal from a vendor. you can get 100' of it for under $8 from here

u/ReconWaffles · 3 pointsr/hookah

i'd think 600w is way too high (i'm an electrical engineer)
if you use kanthal instead of nichrome (actually most ecig modders use kanthal) it is pretty cheap. the only thing you would have to manage is power to it and the way the coil is set up in the bowl.

As for idle vs burn temp, you could just use an arduino (or just the micro) to control two different mosfets that run 5v and 12v (or whatever voltage you want)

kanthal link:

http://www.amazon.com/TEMCo-Kanthal-Wire-Gauge-Resistance/dp/B00FBSVQX6/ref=sr_1_1?ie=UTF8&qid=1406154845&sr=8-1&keywords=kanthal

u/NorseSock · 3 pointsr/electronic_cigarette

I'm going to give you a list with some upgraded options.

|Item|Base|Upgrade|
|-----|------|---------|
|Mod|Sentinel M16 Clone ($24.99)|Nemesis Clone($31.99)|
|RDA|IGO-W ($12.99)|
|Battery|Sony VTC5 ($10.99)|Buy more.|
|Charger|Nitecore i2 ($11.55)|Nitecore i4 ($16.25)|
|Wire|28 gauge Kanthal ($7.30)|
|Cotton|Your local drugstore, like $4)||
|Total|$71.82 + tax/shipping|All upgrades: $94.51|

You could save a couple bucks by ordering from China, but you'll be waiting quite a while for your stuff. I'm not a huge fan of the Sentinel clone, but it's really inexpensive. If you're cool waiting like a month, then I'd get the Nemesis Clone from FastTech.

u/isolatedvirus · 3 pointsr/electronic_cigarette

For my (future) sub ohm mech modders out there. Here is a quality setup that will allow you to rebuild to your heart's delight. I recommend a minimum of 4 batteries.

u/boxsterguy · 3 pointsr/electronic_cigarette

For future reference, you can get the same thing for almost half the price from TEMCo, either directly or through Amazon.

u/subohmygawd · 3 pointsr/electronic_cigarette

The step up to claptons from regular wire is a big one. You'll get even better performance out of fused claptons, but the difference isn't as large as you'll see when you transition from regular to clapton. Super fancy builds are usually on par with fused claptons, but they're pretty much just for show despite what they say on the YouTubes.

It doesn't have to be expensive, though. Just buy a couple rolls of cheap wire on Amazon (I recommend TEMCo), grab the nearest drill, and spend some time learning to make your own. Your first few will suck, but the next few will be functional, and then after the first dozen or so it'll be pretty easy. A 250-ft spool will last you a long, long time for all of about $7.

https://www.amazon.com/TEMCo-Kanthal-wire-Gauge-Resistance/dp/B00FBSVQX6/ref=sr_1_7?ie=UTF8&qid=1485384791&sr=8-7

Stainless is all I use. It's a bit finicky, yeah, but it's the best TC-capable wire for flavor and safety. Nickel has safety concerns regarding nickel poisoning, is a soft metal which makes it more difficult to work with, and can't be dry burned. Titanium has safety concerns with respect to titanium oxide, tastes weird (to me), and can't be dry burned. Stainless has none of those issues, but is tricky to get working correctly until you get the hang of it.

u/uuzinger · 2 pointsr/electronic_cigarette

I highly recommend you take it to another store and ask them if they can build your first coils for you. Most places will do it for you for free if you buy a small container of ejuice from them. Ask if you can watch them build it, and ask questions about what type of wire, wick, diameter of the coil, etc. I've found that every good store is glad to help train new users and won't make you feel bad about starting in the hobby. Get used to how their coil acts, performs, etc. Some of my local places have 'build and brunch' days, where they invite lots of people to come in and get help, learn about stuff, share tips, etc.

You're also going to want a few spare batteries (so one can charge while you're using the other), a battery charger, wick, wire, and an ohm meter.

You can compare prices on Amazon to make sure you're not paying 2x retail.

Cheap ohm meter: http://amzn.com/B00KI0BMMC
I'm sure you can get better ones, but I have this. It matches the readings on my evic, so I'm reasonably sure it's accurate.

Wire cutters: http://amzn.com/B00FZPDG1K

Kanthal wire:

24g http://amzn.com/B00H8DQ01U

26g http://amzn.com/B00JTGYS40

28g http://amzn.com/B00FBSVQX6

Never hook up new coils to your battery without doing a resistance check first. Results can be very very bad.

u/Aenonema · 2 pointsr/electronic_cigarette

Here is the link to save you some time

u/hectomaner · 2 pointsr/RBA

Lots of good info about things to research as a beginner already posted.

As for gear, I would suggest something like a stingray x. It is a very snazzy mech mod, and you can get them relatively cheap. SXK made a solid clone, and they are sold as SXK and also as Infinite.

I would suggest an Infinite CLT for an atomizer. Extremely solid RDA, its cheap, has adjustable air flow, and decent size post holes, which will allow you to experiment with different types of builds as you get more comforatble. If you don't mind a tighter air flow, the tugboat v1 has really good flavor, and you can get one for like 9 bucks on 101vape.com, so that is another option.

I would start out with 28 gauge kanthal, you can find it here for under $8 for 100 ft.

Battery charges, I would suggest either an efest luc v4 (a bit more expensive) or an nitecore intellicharger. I think they both come in 2 or 4 bay. For batteries, Sony VTC4 will handle most builds that you would run, but be sure to find an ohm reader so you can test what you build, very important when you are starting out.

u/johnny2glasses · 2 pointsr/electronic_cigarette

What batteries do you have? I have a stingray and an igo-w and with my vtc4s it works fine, but with my 1600 mah efests it won't fire because the insulation on the battery covers some of the 510 connection. I think there is the same issue with the efest 35 amp only with the firing button, I don't know for sure.

So to be safe I'd recommend sony vtc4s or 5's with the stingray. And the igo is great but I think the Omega would be better since it has adjustable airflow. The intellicharger i2 is cheap and good. For the kanthal I think 28 would be the most versatile.

The stillare clone would be great too.

u/delibertine · 2 pointsr/electronic_cigarette

Hi!

First off, congrats on wanting to quit. = )

I have this Kayfun 3.1 (the one on the left, though that isn't my pic), which I believe is Tobeco. I say believe because I got it from a local B&M. I know the owners and it's what they use so I didn't bother to ask as I knew it would work. I've had absolutely no problems with it whatsoever and love it. Best flavors I've ever had, super easy to rebuild once you get the hang of it, no leaks, threads are like butter.

Getting a 3.1 over the Lite was just a choice of how much juice I wanted to carry.

I got my wire from here and bought organic cotton from Walgreens.

As far as juice goes, if you're trying to save some money I'd suggest Mt Baker Vapor. There's a post I saved from someone here who ordered an obscene amount of Mt Baker juice for under $100 and I can find it if you want because it came down to bottle size. I'm sure you'll get plenty of other great recommendations.

u/DrPepperHelp · 2 pointsr/electronic_cigarette

Advanced/box mod starter setup.

For an OKR-T10 mod.

I should mention that, yes, I am friends with /u/DBLiquids, but I am not doing this at his request. This is my own doing, and for fairness I also linked to a second Duke vendor as well.

Here for the Duke, curently the product has been removoed from the site due to some issues with the shopping cart.
here for the Duke again,
and here (again) for the Zorro.

The Zorro is a passthrough you will not need any batteries for this as it comes with a power supply. As for batteries for the Duke look for 10 amp 2900 mAh batteries from here. They must be niple top for ease of use.

I am going to stop here, and go over some battery safety with you.

  1. When you stack batteries like this you need to swap positions.
  2. These batteries are now paired for life after their first use together.
  3. They also need to be at the same age.
  4. Number of discharge cycles.
  5. Same charge level. So if one battery is at 4.0 and the other is at 3.5 you have a problem. If they are within .1 volt of each other you are fine.
  6. Number them. This way you can keep track of what position each battery is in with each use.

    For a charger my top three suggestions are in order:

  7. Xtar VP1
  8. Xtar VP2
  9. Nightcore i4

    As for an atomizer you should get a TOBH, an iGo-W or iGo-W 4.

    Kanthal you can get from Amazon. I would suggest the 28 gauge that I linked.

    Something to wrap around, multimeter, screwdrivers, tweezers, pliers, cotton, and large butane torch. I will not link these as you either have them already, or they can be easily sourced locally at either your local hardware store or drug emporium.

    First side note on the cotton just make sure that it is bleached with hydrogen peroxide and not bleach. Organic or bleached with hydrogen peroxide are both fine. Boil if you want, but it is not necessary.

    Second side note The prices for the batteries and chargers are manufacture direct. Amazon is your friend if you want a better price. look at Illumination Supply will also be a good source for batteries if you want to price hunt.
u/vapormaker843 · 1 pointr/ecigclassifieds

I doubt that you're going to get a better price than this on here


http://www.amazon.com/gp/aw/d/B00FBSVQX6/ref=mp_s_a_1_1?qid=1398059494&sr=8-1&pi=SX200_QL40


They also have other gauges of wire on there too

u/GirlSweatshirt · 1 pointr/electronic_cigarette

I have the exact same wire and i find i need less wire to achieve the same resistance as others, that is extremly weird

u/Rec0de · 1 pointr/Vaping

Here is my setup:

u/ConcernedKitty · 1 pointr/electronic_cigarette

When first getting into mechs there are a few costs that are unavoidable. They are as follows:

Good batteries

Sony VTC5 or VTC4 from illumn.com or another trustworthy battery supplier.

A good charger

Nitecore i2, Nitecore i4, Efest LUC v4, or Xtar brand chargers.

Ohmmeter

 http://www.fasttech.com/product/1519800-atomizer-resistance-tester-ohm-meter

Kanthal

28 gauge
 http://www.amazon.com/gp/aw/d/B00FBSVQX6?cache=38a824a0030f01bef8e0aaea10a9fb59&pi=SX200_QL40&qid=1411501324&sr=8-1#ref=mp_s_a_1_1

24 gauge
 http://www.amazon.com/gp/aw/d/B00K22JQ2E?cache=38a824a0030f01bef8e0aaea10a9fb59&pi=AC_SX110_SY165_QL70&qid=1411501449&sr=8-6#ref=mp_s_a_1_6

Organic cotton balls or rayon (sold as cellucotton 100% rayon)

This stuff will need to be bought no mater what mechanical mod you get (Gauge of kanthal can be different sizes)

Now for the fun part, picking mods. The nemesis is a solid performer.

Nemesis

 http://www.fasttech.com/products/3027/10009160/1604509


This should immediately be done to the switch. It is the best modification that I have ever made and it is free.

http://www.reddit.com/r/electronic_cigarette/comments/1yczcg/my_fix_for_the_nemesis_button_and_how_to_shorten/


Switch Magnets

 http://www.fasttech.com/products/3099/10005773/1558901-switch-magnets-for-nemesis-mod-10-pack


If you want power regulation you can use a kick module which regulates wattage between 5 and 12 watts.


Kick Module

 http://www.fasttech.com/products/3099/10006524/1501000-variable-wattage-kick-module-for-mechanical-mod-pv


If you are using a kick then you don't need to worry about voltage drop, but if you are going for more than 12 watts (which you are most likely going to do unless you are using a kayfun or clearo) copper tape will reduce voltage drop significantly.


Copper Tape

 http://www.amazon.com/gp/aw/d/B00CBPK0FW?cache=38a824a0030f01bef8e0aaea10a9fb59&pi=SY200_QL40&qid=1411500089&sr=8-1#ref=mp_s_a_1_1


Also optional, to reduce voltage drop and overall length of your mod. This one is specifically made to fit the nemesis and kayfun.

Nemesis Hybrid Connector

 http://www.fasttech.com/products/3023/10009156/1662400

I use one of these to connect the nemesis in 18350 mode with a kayfun 3.1. It stands at 4 inches tall and is great for putting in your pocket when you're out drinking, causing trouble, or whatever it is that the kids are doing these days.

If you are looking for something a little cheaper to just get the feel of a mech, I started with an M16 telescopic mod.

 http://www.fasttech.com/products/1411/10005307/1627200-sentinel-m16-style-telescopic-mechanical-mod

You won't be able to put a kick in it or use copper tape and it is made mostly out of aluminum, but it is a solid mod to start with and can take 18350-18650 batteries. Any 18350 batteries that you get should be AW IMR or purple Efest batteries.


Of course you will need an atomizer to go with your new mech. Most 3 post drippers are good to start out with. I prefer the IGO-M because of the large air holes and 2 screw positive block, but there are a lot of options for drippers. The Kayfun 3.1 is usually a good starter rebuildable tank atomizer (RTA)


And last, but not least, we get to battery safety and types of mods. Godofsteam.wordpress.com/intro-to-vaping/ is the best site that I have ever visited for research into mechs and rebuildables. It should be all you need to help you get started.

u/poweroflegend · 1 pointr/electronic_cigarette

First advice is to get yourself some 28 guage kanthal. Will be a hell of a lot easier to work with and you can build a bigger coil.

u/SinfulRemedy · 1 pointr/electronic_cigarette

Depends if you're interested in the 18650 mechanical mods or more like box mods.

If you started on a kanger tank of any kind, most would consider a Nautilus an upgrade. But venturing further the Kayfun is probably a better option if you take the time to build and learn.

As for mods; You could use a Nautilus on an MVP 2.0 for a box mod. All the way up to DNA chip mods which just give you more exclusive control over your exact power input to the coil.

I started with an eGo-C and eventually decided to try new stuff. Clearomizers and different tanks. Kanger T3's to PT2. Cartos and all kinds of bs.

If I had to recommend you a set up via my personal tastes and through real testing. I would tell you to buy:

  1. Sony VTC-4 18650 battery as many as you'd like.
    VTC-4 Purchase LINK

  2. A mechanical mod like a Nemesis or Stingray.
    Nemesis Clone Purchase LINK

  3. 28 Gauge Kanthal for learning and use.
    Kanthal Purchase Link

  4. A charger.(You can use any kind you like but there are safety precautions to be had with batteries if you sub-ohm especially)
    Charger Purchase LINK

  5. A 510 connection ohm meter.
    Ohm Meter

  6. Organic Pure Cotton - Boiling them is your choice to do or not.
    Cotton LINK

    And your own e-liqid of course.

    None of these items are necessary to vape on and are not of a professionally organized list. But they'll definitely move you on up in the vaping world and your experience can be completely tailored however you like with these items.
u/oohpickme · 1 pointr/electronic_cigarette

Amazon sells Temco wire, it's $7 for 100ft. They also have organic cotton balls, I get these.

I have an authentic Brass Monkee and it's my favorite RDA. I wish it were just a tad bigger to build on. The Tobh I have is from Tobecco, and the o-rings are shit. They frayed really quickly. Maybe I just got unlucky? While o-rings are easily replaced, the quality of the Tobecco was good, so I'd assume the Brass Monkee clone would be as well.

u/eim1213 · 1 pointr/electronic_cigarette

As everyone else has said, you don't want those batteries nor that charger. They are unsafe to use in a mechanical mod, and that charger will either crap out on you or break within a few months. You'll also need an ohmmeter to check the resistance of your builds, kanthal for your coils and something for wicks. Recommendations below:

  1. Batteries: Most important thing not to skimp on. The best batteries that are readily available are the LG HE2 and the Samsung 25R.
  2. Charger: The charger is also quite important. The one you have is one of the brands no one likes because of its reliability. It will likely break within a month. Consider doing yourself a favor and purchasing a Nitecore Intellicharger. These are very commonly used because they work great, and are made by a trustworthy brand.
  3. Ohmmeter: Another crucial part of the process. You need this in order to make sure whatever you're building is safe. You can pick up a cheap one from Fasttech here.
  4. Wire: You'll obviously need some wire to build your coils. To start with, get some 26 and 28 gauge kanthal. This will allow some flexibility in your builds, and allow you to start experimenting. You can get 26ga here and 28ga here
  5. Wick: Here's one thing that is personal preference. Personally I like to use Japanese cotton pads, but a lot of people use either rayon or organic cotton balls.

    I know it seems like a lot to take in at first, but it'll be worth it once you get everything and it's nice high quality stuff to last you.
u/newvictim · 1 pointr/Random_Acts_Of_Amazon
u/NsMnSm · 1 pointr/electronic_cigarette

Is this the right kanthal to buy?

http://www.amazon.com/Kanthal-Wire-28-Gauge-Resistance/dp/B00FBSVQX6/ref=sr_1_1?ie=UTF8&qid=1397096496&sr=8-1&keywords=28+gauge+Kanthal+Wire


I have no idea what I am doing or what else I need to buy, have any suggestions :-)

u/VaporChicken · 1 pointr/electronic_cigarette

Hahah. No prob man. I'm always willing to help out a fellow vaper, especially someone in the military. 3 of my best friends served a year in Iraq and two of them are now Rangers. Anything I can do to help make your time pass easier would be my pleasure. First off, you don't need a butane lighter for the kanthal. That's not necessary at all. I don't torch any of my wire before putting it in. Usually you would use that to oxidize SS mesh before using. The first thing I mentioned was the V4 Fogger. You can buy this here( http://www.eciggity.com/fogger-v4-1-v4-4/ ) since it is sold out on Fasttech. I would also buy a replacement tank for this since it is glass. You can buy a couple of them since they are on Fasttech for only $1.80 each, just add it to your order(I would prob buy 5 just in case. It's overboard, but just in case). Next you can buy 100ft of 28g kanthal wire here: http://www.amazon.com/TEMCo-Kanthal-Wire-Gauge-Resistance/dp/B00FBSVQX6 . Next is the cotton. You can buy organic or sterile cotton. You can find this at CVS or Walgreens. I would buy about 3 bags of this just in case. If you run out, I'm sure the base that you will be stationed at would have a couple of hand fulls for you. As for other devices, not sure what you are into. Drippers are good for clouds but you have to keep dripping on them intermittently. Kayfuns/Russians are good for the tighter draw if that's what you are into. You can find these clones on fasttech as well for a decent price. Last but not least, an ohm tester: http://www.fasttech.com/products/0/10006334/1494601-atomizer-resistance-tester-ohm-meter . Let me know some other questions that you have. Also, how long you going for?

u/Roughknite · 1 pointr/electronic_cigarette

Err, the tweezers just fyi MUST be ceramic tipped. You can't use normal tweezers.

For kanthal your best bet is amazon.. extremely cheap.

HERE and HERE

edit: the tweezers on Fasttech HERE