Reddit Reddit reviews TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 80 pounds Each in 1/2-in Drywall by TOGGLER (12 Pack)

We found 24 Reddit comments about TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 80 pounds Each in 1/2-in Drywall by TOGGLER (12 Pack). Here are the top ones, ranked by their Reddit score.

TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 80 pounds Each in 1/2-in Drywall by TOGGLER (12 Pack)
Toggle anchor installs behind 3/8- to 2-1/2-thick hollow materials including gypsum board,Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation andMade in USA, and includes 1/4-20 UNC-threaded boltsUltimate tensile strength is 265 lb. in 1/2 drywall and 1,080 lb. in concrete block with a 1/4-20Use one-fourth or less of listed maximum values for safe working loads
Check price on Amazon

24 Reddit comments about TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 80 pounds Each in 1/2-in Drywall by TOGGLER (12 Pack):

u/greatwhitegibby · 12 pointsr/buildapc

Wife and I just got a floating shelf from Ikea. I believe this to be it:
https://www.ikea.com/us/en/catalog/products/60426284/


We're not using it for a PC. But it is pretty dang sturdy. We put it behind the sleeper sofa in our basement, for my parents' cpap machines when they visited a couple weeks ago.


If you're not good at hitting studs, like me, get you a set of these babies:
https://www.amazon.com/12-TOGGLER-SNAPTOGGLE-included-Fastener/dp/B01IU6HG48/ref=sr_1_4?keywords=toggle+bolts&qid=1555696561&s=gateway&sr=8-4


I keep boxes of these in my house at all times because I absolutely SUCK at finding studs in walls (even with a stud finder). One of those things will hold 80 pounds in drywall. Plenty for a PC.

u/BigBankHank · 9 pointsr/DIY

Nice job, man. Money and time well spent.

Here’s a super easy, cheap, yet still very slick stop gap option til you have the time/$/inclination to tackle the uppers. FYI, the steel on the ikea “stainless” shelves can get spot rust over time, so like most IKEA solutions it’s short term. As an alternative, you could just get the brackets and do butcher block (or just maple) to match the counter top.

Use snap toggles and you don’t have to sweat stud location. Properly installed they can hold hundreds of pounds. Buy a box, you’ll be glad to have lots of extras for future projects.

(They’re available at HD/Lowe’s. They come with zinc plated 2-1/2” 10/24 machine screws; worth splurging on stainless replacements since they’ll be visible and they’re in the kitchen. They can be repositioned slightly if necessary, which allows for level micro-adjustments with the shelf in place. The first shelf might take 30-45 min while you get the hang of it, subsequent shelves will go up in 10 min flat.)

Four shelves, box of snap toggles, stainless machine screws: under $200. Install: 2 hours. 3 tops.

(Source: Contractor/Interior finishes)



u/TortureSteak · 8 pointsr/DIY
u/KnightHawk37 · 7 pointsr/DIY

Use this kind

12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER https://www.amazon.com/dp/B01IU6HG48/ref=cm_sw_r_cp_apa_i_DFNNDbR6C3Y1B

u/Rick91981 · 5 pointsr/HomeImprovement

Actually both sites are right. You drill into the metal studs AND use toggle bolts (anchors). Find the center of the metal stud and drill (1/2 inch hole, but will depend on the size of the toggle bolts. Read instructions). Then put the toggle bolts into that hole. don't use cheap anchors, use something sturdy like these: https://www.amazon.com/12-TOGGLER-SNAPTOGGLE-included-Fastener/dp/B01IU6HG48/ref=sr_1_3?ie=UTF8&qid=1542049795&sr=8-3&keywords=toggler+drywall+anchor

u/NotJeff_Goldblum · 5 pointsr/battlestations

They make drywall anchors. I installed some and then bolted a piece of plywood to it. TV mount was then screwed to the plywood.

These are similar to the ones I used.

u/makemenuconfig · 2 pointsr/HomeImprovement

Metal studs can hold shear weight well with sheet metal screws. May need to predrill if you don't have good metal screws.

Hanging something like a TV which has a lot of pullout force might require wood blocking behind the drywall or something like a toggle-lock or toggler to back the thin metal.

This will largely depend on the type of shelf you install. For example with a typical shelf bracket the bottom screw will have more shear force, and the top will have more pullout force.

u/frenchiebuilder · 2 pointsr/centuryhomes

If you're talking pictures or other lightweight items, and you have picture rails (thin trim on the wall, near the ceiling) picture-rail hooks and some wire or string:

https://www.amazon.com/s?k=picture+rail+hook&ref=nb_sb_noss_1

If you don't have picture-rail trim (or it's un-usable, from a century of paint buildup, like mine) these work quite well:

https://www.amazon.com/Picture-Hangers-Coologin-Professional-Mounting/dp/B075QBTKJD/

The nails are quite skinny and sharp, and the hook holds it steady while you tap it in, so (in my experience) they never do any damage to old plaster walls. If you're at all nervous about it, get an upholstery tack hammer

https://www.amazon.com/Estwing-Sure-Strike-Tack-Hammer/dp/B001DZTQG0/

It's small & light enough that you won't damage the wall if you miss, but heavy enough to get the job done when you don't miss.

Either way, don't smack the shit out of it. Repeated light taps will get you there. tap, tap, tap, tap...

​

If you need to hang something heavy, like a shelf, use toggle bolts. Specifically, snap-toggles

https://www.amazon.com/12-TOGGLER-SNAPTOGGLE-included-Fastener/dp/B01IU6HG48/

are way easier to use than traditional toggle bolts. Although you might need to buy longer bolts, separately, because old plaster's a lot thicker than drywall. And you will be going through a lot of drill bits, old plaster just eats them. So get spares. I second the tape trick, and (depends on the wall, you get a feel for it) masonry bits sometimes work better.

​

I used to love the screw-type anchors, but I've also had them get stopped by the scratch coat or the lathe, then blow out the surface coats; result is a hole 2-3 inches across and an inch deep. So... counter to some people in this thread... I Do Not Recommend those.

u/NightmareNoises · 2 pointsr/DIY

Toggler Snaptoggle brand toggle bolts (not regular toggle bolts!). There are various models but the ones I've used require a 1/2" hole each. I've used two to hang an adult bicycle, and used a few in conjunction with one lag for a plasma TV. Note in the product description on the total weight recommendations since your mount is around 20lbs (excl shipping material). Example:

"Recommendations: 

  1. 4 Togglers are recommended for low profile or tilting tv mounts with TV weights from 0 to 75 pounds. 
  2. 8 Togglers are recommended for low profile or tilting tv mounts with TV weights from 75 to 100 pounds."

    12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER https://www.amazon.com/dp/B01IU6HG48/ref=cm_sw_r_cp_apa_l3GQAb516XPXX
u/scrager4 · 2 pointsr/DIY

I use togglers to mount all my TVs. They would be even stronger on plaster lath.

The only time I would hesitate is for an articulating mount that can come away from the wall. In that case find at least one stud and use togglers in the corners or the side that isn’t on a stud.

12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER https://www.amazon.com/dp/B01IU6HG48/ref=cm_sw_r_cp_api_QNi6BbV9J5WBP

u/FightingIllini87 · 2 pointsr/HomeImprovement

These are a little pricey, but I’ve used these snaptoggles to hold up TVs as large as 65” with solid results. Very easy to install and more than strong enough to hold a monitor in drywall.

https://www.amazon.com/dp/B01IU6HG48/ref=cm_sw_r_cp_api_yaB5BbAWE5483

Your gripit anchors should work just fine as well.

u/Jamesmconley · 2 pointsr/HomeImprovement

I haven't tried them myself but they may work in your existing holes. If not maybe another toggle style. Other than that I think you may have to patch the in some fresh sheet rock behind the speaker.

12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER https://www.amazon.com/dp/B01IU6HG48/ref=cm_sw_r_cp_apa_HKRCAbX1MYTJD

u/Play_The_Fool · 1 pointr/HomeImprovement

Big fan of the snap toggles, https://www.amazon.com/gp/product/B01IU6HG48 they have a very cool installation technique.

u/turberticus · 1 pointr/IKEA

So I discovered the studs in our apartment are 48" apart and appear to be steel. Steel studs are hollow and the metal is pretty thin, so I would rather not drill a simple screw in to them. I could drill a 1/2" hole and insert a toggle, but I would need to drill dead center in to the metal studs which are only 1 1/2" across, so that is quite risky.

I am strongly considering using these toggles in the drywall the entire way across. Also since both end units will essentially sit flush on top of the towers, the towers should absorb some of the load. The middle unit is pretty light so I'm not overly concerned about that.

What do you think?

https://www.amazon.com/12-TOGGLER-SNAPTOGGLE-included-Fastener/dp/B01IU6HG48/ref=pd_lpo_vtph_bs_t_1?_encoding=UTF8&psc=1&refRID=ZY40PJA82G4Y3SW418C9

u/btgeekboy · 1 pointr/malelivingspace

Studs are best, but in a pinch you can probably use these:

https://www.amazon.com/12-TOGGLER-SNAPTOGGLE-included-Fastener/dp/B01IU6HG48

I’ve used them to hang small (32”) TVs before in offices with metal studs. Work great.

u/400HPMustang · 1 pointr/DIY

Hi. The mount itself isn't what's putting the strain on the wall. It's the weight of the TV on the mount. Even if it feels secure after you mount it the weight of the tv will begin pulling on the mount and causing it to rip at the drywall.

Supposedly you can use snap toggles like this and I'm not saying you can't use them, I'm just saying I've never used them so I can't verify that they're good to go based on any experience.

I was always told that anything that's load bearing should be mounted into studs otherwise you're just screwing something really heavy into drywall and eventually it will fail.

u/radicalbeeb · 1 pointr/howto
u/jeff303 · 1 pointr/homeowners

Something like this?

u/ZenithPrime · 1 pointr/malelivingspace

Depends on what your complex allows. Usually drill holes aren't an issue since they can be pretty easily filled later. When I mounted my TV, I found a stud close enough to the center of where I wanted it hung, drilled 2 into that, then drilled 2 holes on the sides and used two of these things for each side since the studs were too far. Used something similar to this For reference.

u/jumpjet2k · 1 pointr/HomeImprovement

A quick Google search found me these anchors. I would recommend trying to drill and install the anchor through both the drywall and plaster if you can. The extra length, and anchoring to the back of the plaster, should make them much sturdier.

u/dept_of_silly_walks · 0 pointsr/HomeImprovement

I am surprised I haven’t seen a mention of wall toggles here.
Zip toggles like this(note, amazon link) are my go-to when hitting a stud is out of the question. You can get them in different weight ratings, for different applications, and it sits pretty flush to the wall. Better in every respect than drywall anchors, excepting price - but at ~$2 per, I’ll pay that for piece of mind (I’ve never had a toggle fail on me).
The install is super simple, too: Drill a hole (1/2” for the 250lb rated size), put the toggle in, zip it down, snap the excess zip off, then use the provided bolt to secure the object to the wall.

 

As a disclaimer: no shill zone, the above link was provided for the pics. I have had luck with other toggles as well, so I’m not brand loyal. I think the only difference for for competing fasteners is in the zip/snap action - but if you go the hardware store and ask for wall toggles, they’ll set you up.


Again, this is second only to hitting the stud directly, you should always try that as the first option.

E: wall, not walk

u/TraumatizedZombie · 0 pointsr/DIY

I've had a slot of success mounting TVs, including a plasmas, directly to drywall with heavy duty Toggle Bolts. The bolts are the anchors and use washers under the head of the screw, sandwiching the TV mount. My only concern using them would be if the framing studs that you apparently don't have are too far apart or your drywall is super thin.