Reddit Reddit reviews TP-Link 8 Port Poe Gigabit Switch | 4 Port Poe 55W | 802.3AF Compliant | Shielded Ports | Traffic Optimization | Plug and Play | Sturdy Metal (TL-SG1008P),Black

We found 21 Reddit comments about TP-Link 8 Port Poe Gigabit Switch | 4 Port Poe 55W | 802.3AF Compliant | Shielded Ports | Traffic Optimization | Plug and Play | Sturdy Metal (TL-SG1008P),Black. Here are the top ones, ranked by their Reddit score.

Computer Networking
Computer Networking Switches
Electronics
Computers & Accessories
TP-Link 8 Port Poe Gigabit Switch | 4 Port Poe 55W | 802.3AF Compliant | Shielded Ports | Traffic Optimization | Plug and Play | Sturdy Metal (TL-SG1008P),Black
Poe hub with 4 port PoE, auto negotiate PoE power with PoE devices and protect the non-PoE devices4× PoE (802.3af) ports providing up to 15.4W per port, total PoE budget 55WIdeal for PoE IP Cam, EAP, access point, IP phoneFanless design, always working there silentlyPlug-and-play, simple set up with no software or configuration neededSystem Ram Type: ddr3_sdram
Check price on Amazon

21 Reddit comments about TP-Link 8 Port Poe Gigabit Switch | 4 Port Poe 55W | 802.3AF Compliant | Shielded Ports | Traffic Optimization | Plug and Play | Sturdy Metal (TL-SG1008P),Black:

u/KingdaToro · 5 pointsr/HomeNetworking

Since this is a business, you need to do this properly. You need access points that are connected with Ethernet.

What I'd recommend:

3x NanoHD AP, one for each floor. If these are too expensive, get the Lite instead.

Second, you'll need a switch. Since the APs are powered by PoE (Power over Ethernet), the simplest and cleanest way to go is a PoE switch. Ubiquiti makes their own, or you could get an unmanaged one. On either of these, ports 5-8 are the PoE ports, so connect the APs to these. The APs include a PoE injector, so you could use these instead and get a normal gigabit switch.

For the router, you'll want this. Simply connect the LAN1 port to your switch and the WAN1 port to your modem. If your current router is a combined modem/router, replace it with a dedicated modem if possible after checking what modems your ISP supports.

Lastly, you'll need something to run the controller on. If you have a desktop PC that's connected with Ethernet, you can just use it. But if you want to use the guest portal feature (and you probably will, for restaurant patrons and B&B guests) the controller needs to run all the time. In that case, it's best to put it on a dedicated, low-power device. Ubiquiti makes their own, it's easy to use but expensive. A much cheaper solution is to just use a Raspberry Pi.

u/mercenary_sysadmin · 4 pointsr/HomeNetworking

I'd go Orbi if I were going mesh... but if you have wired backhaul, you should consider saving yourself some money and just deploying wired access points instead.

Ubiquiti UAP-AC-Lite have been the industry mainstay for quite some time, and they work great. However, you really need to deploy a software controller (Unifi) to manage them properly, and that needs to be backed up regularly (or you'll lose control of them and have to paperclip reset them and set them up from scratch).

If that's more than you want to deal with, TP-Link's EAP-225 is both less expensive than the UAP-AC-Lite and fully-featured without need for a controller. If you want a controller, TP-Link also offers one - called Omada - which is free as in beer and works very well, but you don't have to; if you just want to set each AP up individually in a simple web browser, you can.

A pair of EAP-225s will run you around $115 or so total.

The thing you will be missing if you go with EAP-225s (or Ubiquiti UAP-AC-Lite) is the wired connection for local devices, but that's really not a big deal - the answer there, since you have a wired connection for the AP in the first place, is just to run a cheap desktop switch behind the AP. You can get an 8-port gigabit unmanaged switch for well under $50 (under $20, if you're shopping online). Plug the switch into the wall, plug the AP and your devices into the switch, done. If you want to spend a touch more money, consider a PoE switch instead; for $60 you can get an 8-port switch with power over ethernet, which will save you from needing to use a power supply for your access point - it'll get its power directly over the ethernet cable itself, coming from that switch.

u/mcez322 · 4 pointsr/HomeNetworking

TP-Link 8-Port Gigabit Ethernet PoE Desktop Switch with 4-PoE Ports (TL-SG1008P) https://www.amazon.com/dp/B00BP0SSAS/ref=cm_sw_r_cp_api_.9FTzbPAAYE62


Been sitting up in my attic (yeesh) for over a year powering 4 cameras and also 3 drops with no problems at all. Unmanaged, though.

u/tatanka01 · 3 pointsr/BlueIris

If you can plug both the PC and the camera into the router, that would be ideal. PoE injector will work for the power, or ideally, get a PoE switch to provide the power and connect both (PC and cam) to the switch, then switch to router. Example of cheap PoE switch. I run everything off PoE switches here - it just works.

u/concussion962 · 3 pointsr/homelab

There is a 16 port Netgear "Managed Plus" with POE going for ~45% off that supports 802.3af and up to 15 watts/port that I was tempted by (but out of my personal blow money limit for the month), and a TP-Link 8 Port w/ 4 POE Unmanaged that is going on sale at 10:45 that I am very tempted by due to the plans to upgrade the network to Ubiquiti AC Pros.

Of course, the $59.93 price is only like $10 more than the 5 port w/ 4 POE switches are regularly...

u/captain_dylan_hunt · 3 pointsr/Ring

I have about 20 of these scattered over 3 offices in 3 states. no issues

Tplink 8port-4 port POE 1gig switch

u/diabetic_debate · 2 pointsr/synology

> 4 are outdoor and PoE using this switch:
>
> https://smile.amazon.com/gp/product/B003CFATT2

Just a heads up for anyonelooking for this switch, this is a fast ethernet switch. That is, it only goes up to 100Mbps and not gigabit.

This may be important if you are looking for an all-in-one switch for your home network as well as your cameras.

There is a newer version of the above switch that supports PoE and gigabit:

https://smile.amazon.com/TP-Link-Gigabit-Ethernet-Desktop-TL-SG1008P/dp/B00BP0SSAS/ref=dp_ob_title_ce?dpID=41EWV2w2eQL&preST=_SX300_QL70_&dpSrc=detail&th=1

u/Bilbo_Fraggins · 2 pointsr/Ubiquiti

Curiosity got the better of me and i found a few non-managed PoE switches: they usually seem to have some fixed number of PoE and some non-PoE ports. You might as well pay a bit more and get basic management, or step up to something like the US-8-60W for really not much more. Any of those options assume only 802.3af compatible access points though...

And yes, pretty much every other managed UniFi switch currently made has 24v PoE except the US-8-60W, I just mentioned that one one as it is by far the cheapest one they make. That one doesn't work for the Unifi-HD or SHD either as it's only 802.3af not af+, or I'd own one.

u/Superiorwitt · 2 pointsr/homedefense

So as an update, these are the two options that I think we're going to go with. Well one of the two, any feedback on why the IP cam setup would be beneficial over the Analog?

Cameras: 4 Hikvision DS-2CD2142FWD-I 4MP WDR
https://www.amazon.com/dp/B01A6MYOOO/ref=olp_product_details?_encoding=UTF8&me=

u/KeavesSharpi · 2 pointsr/homesecurity

It's noname Chinese gear, so as long as you're not expecting much. I'd go with a better switch though, like this one: https://www.amazon.com/TP-Link-8-Port-Gigabit-Ethernet-Desktop/dp/B00BP0SSAS/

Also, cat 6. Nobody uses 5e anymore.

u/rtechie1 · 2 pointsr/HomeNetworking

What kind of router do you have (name and brand)?

Your router probably doesn't support PoE. In that case, you will need to use an PoE injector for the camera. If you need to support multiple PoE devices, get a PoE switch.

u/Kitten-Mittons · 1 pointr/HomeNetworking

Switch is a TP-Link PoE gigabit switch

It's actually an AC68P, sorry, but I don't even see a QoS option in there (possibly because it's in AP mode?) Here's a screenshot

I have this problem even if I plug the device directly into the fios router too, if that makes a difference

u/w00tiSecurity_weenie · 1 pointr/homelab

i already impulsively bought this and that router isnt gigabit :( https://www.amazon.com/gp/product/B00BP0SSAS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

u/pic2022 · 1 pointr/HomeNetworking

hmmm I was looking at TP Link 8-Port PoE Switch but you brought up a great point about just using the same interface, so I'm all for that actually. Can you save the day one more time and either recommending the Switch 8 or the Switch 8-60W I know the only difference is the PoE port but, hey man, you helped me out so much so far, I might as well pick your brain. Oh yeah hahaha I'm so sorry about all this.... since I decided to get a switch... I went back to the USG..... good decision? hahaha

u/culb77 · 1 pointr/HomeNetworking

Thanks for your input. I went with a TP Link AP system.

  • Router
  • Switch
  • AP


    It was much less than the Ubiquiti system($180 total), and has a single, good UI. The switch allowed me to hardwire 5 devices, which would have been expensive with Ubiquiti. It met my needs very nicely. Thanks again!
u/Sharkeybtm · 1 pointr/homelab

TP-Link 8-Port Gigabit Ethernet PoE Desktop Switch with 4-PoE Ports (TL-SG1008P) https://www.amazon.com/dp/B00BP0SSAS/ref=cm_sw_r_cp_api_zZSUzbGZ4Y1ZV

Edit: or you can just use a cheap injector with gigabit capabilities.
WT-GPOE-4 gigabit Poe injector for 802.3af devices - 4 Port Power over Ethernet wall mount with shielded RJ45 - power supplies available separately https://www.amazon.com/dp/B015S6ZWXK/ref=cm_sw_r_cp_api_D2SUzbAHX8XC4

u/CollateralFortune · 1 pointr/homelab

So wait. You want one or many PoE ports? With just one, I'd probably go for a PoE injector.

Otherwise something like this would work fine.

u/sknick_ · 1 pointr/HomeNetworking

Just get a PoE injector & connect that to your router & device needing PoE

http://www.amazon.com/TP-LINK-TL-PoE150S-Gigabit-Injector-compliant/dp/B001PS9E5I

Or get a gigabit switch with PoE ports if you need > 1, and link the switch to your router

http://www.amazon.com/TP-LINK-TL-SG1008P-8-Port-Giagbit-802-3af/dp/B00BP0SSAS

u/Cesar_Shibes · 1 pointr/homeautomation

I was looking into the linked switch for that, I believe it provides POE.

It doesn't specifically say it acts as a POE injector though. I need to power 4 cameras and would prefer to power them with only one POE injector. Sort of confused here.

u/WindWalkerWhoosh · 0 pointsr/DIY

How many ports do you need? There's no reason you can't use multiple switches, in fact it makes more sense usually. I use this one.

https://www.amazon.com/gp/product/B00BP0SSAS