Reddit reviews Ubiquiti Networks UniFi AP AC Lite, Dual-Band 24V passive PoE, UAP-AC-LITE (24V passive PoE Indoor, 2.4GHz/5GHz, 802.11 a/b/g/n/ac, 1x 10/100/1000)
We found 35 Reddit comments about Ubiquiti Networks UniFi AP AC Lite, Dual-Band 24V passive PoE, UAP-AC-LITE (24V passive PoE Indoor, 2.4GHz/5GHz, 802.11 a/b/g/n/ac, 1x 10/100/1000). Here are the top ones, ranked by their Reddit score.
UAP-AC-LITE UniFi AP AC LITE 802.11ac Gigabit Dual-Radio PoEThe UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high‑performance wireless networks.Dual-Radio performance, gigabit speeds, the UniFi AC Lite AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti disruptive pricing strategy.Sleek, Ultra-Compact Design, uniFi AC Lite AP features a cleaner design in a reduced footprinthalf the size compared to the standard UniFi AP.Scalable Enterprise Wi-Fi Management, UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
For a temporary solution how about running an Ethernet cable from the existing router to the room directly underneath your office. Then connect a decent WiFi access point to the cable and aim it up to your office through the ceiling/floor?
The Ubiquiti UAP-AC-Lite costs around $80 and comes with it's own power-over-ethernet adaptor so you don't have to use a power outlet at the AP end.
Later on you can install it on the ceiling of your office or anywhere else you need better WiFi signal.
Get 3 of these. Problem solved.
Ubiquiti Networks UniFi AP AC Lite, Dual-Band 24V passive PoE, UAP-AC-LITE (24V passive PoE Indoor, 2.4GHz/5GHz, 802.11 a/b/g/n/ac, 1x 10/100/1000) https://www.amazon.com/dp/B016K4GQVG/ref=cm_sw_r_cp_api_EsVgAbVFWN61G
Ich kann dir nur empfehlen, ein eigenes Homelab einzurichten:
​
Ich spreche dir die Empfehlungen aus, weil ich selbst damit arbeite; ich persönlich mache die besten Fortschritte durch Trial & Error. Viel Lesematerial findest du halt in englischer Fachsprache, das muss dir klar sein.
Edit:
Die Lernkurve ist in vielen Themen sehr sehr steil. Gib nicht auf - es lohnt sich ;-)
Consumer-grade access points generally don't work them same as professional access points. They (consumer) won't reacquire a strong connection until you lose your current one.
So if you are CONSTANTLY moving around your house/apt/etc AND you lose signal/get very weak signal in common areas - THEN a seamless roaming setup is something you could consider.
Technology has improved (shocking, i know) over the past 5-10 years to increase performance per $ of wireless network setups utilizing seamless roaming. Linksys's Max Stream is their version of a wireless mesh network. The biggest part of this is they have the Apple approach of: We did all the hard work behind the scenes, you just do a quick setup and we'll walk you through it. But that's where the extra cost comes in versus other systems.
Depending on the size of your location, it's possible that this dual-band setup will be sufficient for you since it allows 3 wireless areas (+ expansion), up to 20-30 feet from each node (maybe less, environment is a big factor) + all the wired connections from your switch.
If you're looking for 1 to 2 devices, another option to consider is Ubiquiti. They have a range of devices but need more setup than Linksys. It's not hard from what I've seen, but they are very popular for people looking to switch from the common household wireless routers to a seamless roaming router. 1 to look at is their UniFi AP AC Lite [amazon link].
The big thing to learn about when you delve into seamless roaming are 802.11 protocols: k/v then r/f.
802.11k
802.11v
802.11r
802.11f
Now I could be wrong and there's more pertinent info, but having a very very VERY basic understanding of these and finding devices that have/support them will make understanding your network easier(at least in my opinion).
Something like a decent tablet/laptop hybrid https://www.amazon.it/dp/B01LCWGFPS
Two good access points https://www.amazon.it/dp/B016K4GQVG/
A micro server https://www.amazon.it/dp/B013UBCHVU/
About 30kg of Nutella https://www.amazon.it/dp/B00GS64Y4I
Almost a GTX 1060 https://www.amazon.it/dp/B01KHWOAR4
A Philips Hue starter kit https://www.amazon.it/dp/B01LZ8QYPI
Ubiquiti Unifi AC lite
Ubiquiti Networks UAP-AC-LITE WLAN Access Point https://www.amazon.co.uk/dp/B016K4GQVG/ref=cm_sw_r_cp_apa_lHJRAbX10G04Q
Se vuoi sfruttare la connessione l'unica è cablare.
Se vuoi/devi restare sul Wi-Fi tieniti il loro modem e mettici in cascata un AP tipo Ubiquiti Networks UAP-AC-LITE https://www.amazon.it/dp/B016K4GQVG/ref=cm_sw_r_cp_tai_VGp9ybMBRPJSM o il modello Long Range Ubiquiti Networks UAP-AC-LR https://www.amazon.it/dp/B016K5A06C/ref=cm_sw_r_cp_tai_mHp9ybT10149S
Something like this TP-Link EAP225 or Ubiquiti AC Lite is highly recommended as standalone WAPs due to quality performance and reliability.
Goes from HH5 LAN port --> switch --> ethernet -->poe injector (AC lite -- optional for EAP but it includes one) --> ethernet --> WAP of choice.
The HH5 would handle routing and whatnot while the WAPs only job is to broadcast the WLAN connection so wireless devices can connect to the internet.
This TP Link model beats the Ubiquiti in testing:
>The first thing I noticed about the EAP-225 was how complete, functional, and usable its standalone web interface is. I'm most familiar with Ubiquiti's UAP line—and with those, you really need to set up their Unifi controller to access more than a tiny fraction of the functionality of the access points. Not so with the EAP-225. Logging into a single EAP's web UI presents you with everything from multiple SSIDs to VLANs (with rudimentary QoS!) to working captive portal—all with no controller required. All the functionality was well laid-out and easy to find, and the UI was quite responsive.
>The EAP-225 did a flawless job on 2.4 GHz. Spoiler alert, this is as good as it gets for this round-up; do not expect to find a better set of 2.4 GHz curves for any other kit.
> Its 5 GHz maximum throughput scores were middling, roughly on par with Ubiquiti's UAP-AC-Lite. Environments that expect to actively use the 2.4 GHz band as well as 5 GHz would have a tough time finding a better-suited AP.
https://www.smallnetbuilder.com/wireless/wireless-reviews/33191-2x2-ac-access-point-roundup-part-2?showall=&start=6
https://www.amazon.com/gp/product/B01LLAK1UG/ref=as_li_tl?ie=UTF8&tag=small0c-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B076FZ7VJ2&linkId=4e15b03c9269738c292fff3aed0565cf
Several AC lite versions on amazon:
https://www.amazon.com/Ubiquiti-UAP-AC-LITE-802-11ac-Gigabit-Dual-Radio/dp/B01DRM6MLI?crid=32ASJLA25JN0R&keywords=ubiquiti+access+point&qid=1540590671&s=Electronics&sprefix=ubiquiti+%2Celectronics%2C247&sr=1-5&ref=sr_1_5
https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY?crid=32ASJLA25JN0R&keywords=ubiquiti+access+point&qid=1540590671&s=Electronics&sprefix=ubiquiti+%2Celectronics%2C247&sr=1-6&ref=sr_1_6
https://www.amazon.com/Ubiquiti-Networks-Dual-Band-passive-UAP-AC-LITE/dp/B016K4GQVG?crid=32ASJLA25JN0R&keywords=ubiquiti+access+point&qid=1540590671&s=Electronics&sprefix=ubiquiti+%2Celectronics%2C247&sr=1-21&ref=sr_1_21
You're sorta on the right track, but there is definitely room for some tweaks in your setup. First off, you dont need 3 actual routers. to achieve wifi like youre talking about, you need APs, or access points. These simply put out wifi, whereas a router has much more functionality. Secondly, dont buy powerline adapters that have passthough power as the more "noise" on the circuit the worse the performance will be. Id suggest something like the NETGEAR PL1000 In fact, you should avoid having anything else plugged into the wall outlet with the powerline. I did a lot of testing in a previous house where I was forced to use powerline adapters to get internet into my room.
As far as APs, check out the Ubiquiti AP-AC-LITE It's dual band, meaning newer devices will benefit from the 5ghz band, while any older devices you have will still have access to the 2.4ghz band.
You may only need 2 of these. Hang one in a central location on the first floor, and check wifi connection and do a speed test in every room. Depending on results, you could move the AP to the top floor and add a second in the basement. Hard to give perfect advise, as this kinda stuff is all very situational.
Onto the bad.. This setup is much less than ideal, especially if you intend to do any gaming on this setup. Powerline is very susceptible to interference, and sometimes an appliance turning on can cause a momentary connection drop. But not only that, you've now got the entire wifi network tied to this. A drop over the powerline will not disrupt your entire network.To avoid this whole mess, you could potentially use MoCa adapters, which is basically the same concept as powerline, but goes on the homes coax wiring instead of power wires. This of course requires coax already wired into the home to work. If you already have the coax in your house, id definitely use MoCa over powerline. You will be much more satisfied with the experience
Look into the below link, its from UK Amazon but its a global product. I run 3 of these in my house (a little overkill, but one was free) and they are fantastic.
They offer a "roaming" style feature, like you are looking for, but without the need of a conventional physical controller.
Set the AP's up using the mobile app, its a real piece of cake. Then you have access to a whole host of configuration presets from basic to advanced, that allows you to monitor, control and report on everything you could need.
https://www.amazon.co.uk/Ubiquiti-Networks-UAP-AC-LITE-Access-Point/dp/B016K4GQVG/ref=pd_lpo_vtph_147_bs_t_1?_encoding=UTF8&psc=1&refRID=G1ZZZFFNCV46C2T5JNR2
So it looks like there are two active coax connections from the corner where the modem is to the open space in the living room (and the other rooms as well. One is for TV and one for telephone, they tell me. Can you recommend some good MoCA adapters considering price to quality ratio and then what some decent options for APs might be? Are both of the cables in the wall usable with the MoCA adapters? Thanks for the suggestion.
Edit: I saw it mentioned here yesterday and am looking at Ubiquiti Networks UAP-AC-LITE WLAN access point right now. Seems commercial grade and maybe a bit of overkill but it's not prohibitively expensive. I won't be able to ceiling mount it though so I am not sure if something like this is the best option. Would another configurable router along the lines of the AC68U be good to make an access point with?
The MoCA adapters seem to be surprisingly expensive though ...
Edit2: So it looks like what might be my cheapest viable option to start is buying a pair of MoCA adapters and then use my AC68U as a wired access point set up in the living room (main open space) using my ISP modem/router as the gateway. It seems I could either leave the wireless access from the ISP modem on or turn it off. From what I am reading, having the second access point with redundant SSID and password information should allow for hand-off from one device to another?
How big of a space are you trying to cover? If it's a smaller area and only looking for one unit, many people here are going to be suggesting a Ubiquiti AP. You use your ISP provided modem/router and just turn the Wifi signals off, and use your AP to broadcast your Wifi.
I don't speak Spanish, but it looks available to you on Amazon.
https://www.amazon.es/gp/aw/d/B016K4GQVG/ref=mp_s_a_1_5?__mk_es_ES=ÅMÅZÕÑ&qid=1502899470&sr=8-5&pi=AC_SX236_SY340_FMwebp_QL65&keywords=ubiquiti&dpPl=1&dpID=31oux4k0ZCL&ref=plSrch
I would really recommend getting this it’s a way better product than the cheaper alternatives
Thanks for pointing out the bad link, I ended up ordering this one https://www.amazon.com/gp/product/B016K4GQVG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Hoping this is sufficient for my needs.
Are they still as bad if they have full signal to each other? In its current configuration one repeater is directly above the other on the floor above which in turn has direct line of sight to my computer room along the corridor. The reason the ground floor AP doesn't work is there is a lot more obstacles going diagonally into the computer room.
I was thinking two of these
https://www.amazon.co.uk/gp/aw/d/B016K4GQVG/ref=aw_wl_ov_dp_1_1?colid=30RH672DXK6CJ&coliid=IYR79PHEYQ2OD
I used to always have issues with isp provided equipment. I would see if you can testa a new router like UBIQUITI Networks EdgeRouter X 5 Ports Gigabit LAN/WAN Router https://www.amazon.co.uk/dp/B011N1IT2A/ref=cm_sw_r_cp_apa_i_xyCQCb906RRRA with Ubiquiti Networks UAP-AC-LITE WLAN Access Point https://www.amazon.co.uk/dp/B016K4GQVG/ref=cm_sw_r_cp_apa_i_aACQCb20H55SZ
But only if you are OK with lots of setup and reading...
If you got money and don't want to mess about this is good also :Ubiquiti Amplifi 4-Ports Home Wi-Fi System AFI HD Wireless Router https://www.amazon.co.uk/dp/B01L9O08PW/ref=cm_sw_r_cp_apa_i_hBCQCb32C5H0F
https://www.amazon.de/Ubiquiti-NanoStation-LOCOM2-WLAN-Accesspoint-100Base-TX/dp/B00DCNRTAG/
https://www.amazon.de/Ubiquiti-Networks-2-4GHz-867Mbit-UAP-AC-LITE/dp/B016K4GQVG/
I have an SBG6580 and am looking at getting either this:
https://www.amazon.com/Ubiquiti-Networks-Dual-Band-passive-UAP-AC-LITE/dp/B016K4GQVG
or this:
https://www.amazon.com/dp/B0781YXFBT/ref=cm_sw_r_cp_ep_dp_zhWKAbGA77383
and just
putting the SBG into bridge modedisabling the wireless radio. I've read this is a decent solution.A dedicated AP will be better but will it be ~£80 better + config time? For me, yes. For you, probably. I have lost count of how many UAP-AC-xxx I have installed. They are rather good. If you mount a UAP-AC-LITE (https://www.amazon.co.uk/Ubiquiti-Networks-UAP-AC-LITE-Access-Point/dp/B016K4GQVG) on the ceiling it will cover quite a decent range and be usable through at least one brick wall or a plasterboard and wood ceiling/floor or a "drywall" in the US and others.
I have never heard of an iphone doing what you describe but we all live and learn.
Get a long ethernet cable (http://www.cabling4less.co.uk/category.php?cat_id=158 - say £3) and some plastic stick on trunking (https://www.screwfix.com/p/tower-self-adhesive-mini-trunking-12mm-x-8mm-x-2m/73354 about £2 for 2m/6+') and you will be able to do a decent job of mounting the AP on the ceiling unless your place is a bit large in which case I will need a lot more detail and you might need a different or more APs.
For a simple setup there is an app for your phone to get it running, for a more complex setup you'll need the Unifi controller which is a bit beyond r/homenetworking
Are these the ones you recommend:
https://www.amazon.com/dp/B016K4GQVG/ref=sr_ob_2?ie=UTF8&qid=1540921260&sr=8-2#customerReviews
Thanks for the info AC-Lite is what I was planning to get.
If you don't mind is there a significant difference between the older and newer AC-Lites? I want to save a couple of bucks.
old: https://www.amazon.com/Ubiquiti-Unifi-Ap-AC-Lite-UAPACLITEUS/dp/B015PR20GY/ref=sr_1_3?s=pc&srs=8938872011&ie=UTF8&qid=1543453761&sr=1-3
mid?: https://www.amazon.com/dp/B01DRM6MLI/ref=psdc_1194486_t2_B015PR20GY
Newest: https://www.amazon.com/Ubiquiti-Networks-Dual-Band-passive-UAP-AC-LITE/dp/B016K4GQVG/ref=dp_ob_title_def
Grazie per la rapida risposta.
La soluzione server la vedo dura, non avrei neanche idea da dove iniziare.
Ho dato un'occhiata ai prodotti Ubiquiti ed ho trovato questo a poco più di 70€, mi informo a dovere ma in caso credo possa essere una valida alternativa.
https://www.amazon.it/UBIQUITI-Networks-UAP-AC-LITE-Ubiquiti/dp/B016K4GQVG
Sweet! Thank you!
I purchased the Lite in 2017, and the one I linked to is the exact model. Although Amazon does say that there is now a newer model.
What is the difference between this and this? Amazon says the second one is "newer"
Hello! Thank you for your quick and detailed answer!
From what I've learned here and also in another (german) forum I posted this, it seems like Powerline "does the trick" but is far from being optimal. So I'll try to avoid that. MoCA seems to be a very good alternative but I cant find a way to buy it here in Austria(Germany would also work) and it also seems to be pretty expensive (lets say 3 adapters each 99$/80€ + an AP for each one).
However, the AP you posted seems to be very strong. I've read a few of the comments/reviews on Amazon and there where quiet a lot of people saying how strong the signal is and how well it works.
Some background to my "situation": The basement is where my father will live and he is not very demanding in terms of WiFi speed. Its important for him to have access but his needs are very simple (no online gaming or HD-Movie-Streaming). Ground and top floor are "my area" this is where I need very good connection. I also though about the layout of the house and appearently my dads "office" and his bedroom are right underneath my living room.
Lets for a moment overthrow all of the setup mentioned in the OP and try a different and much simpler thing:
As far as I know the Modem on the top floor gets its "Internet" (sorry if I sound dumb) from an Coax Plug. So it should be possible to just move the whole thing to a different plug on the base floor. (Is it that simple?).
If that would work I could just try to buy one of the Ubiquiti AP-AC-LITE you mentioned, connect it to the modem and place it in a relatively central position.
Since the signal output of the AP seems to be very good it might actually work well enough for my dad in the basement, while providing excellent speed for the base and top floor.
So given that it is that easy to move the modem, would that be an option? Or am I overseeing something here? Because that would be WAY cheaper and take way less effort.
An update, after reaching out on another thread, this device would seem perfect as you can use it to create a seperate wifi network to your main network and then set up a 5ghz channel (SSID) that you only connect the Quest to...
https://www.amazon.co.uk/Ubiquiti-Networks-UAP-AC-LITE-Access-Point/dp/B016K4GQVG/ref=sr_1_2?keywords=Ubiquiti+Networks+UAP-AC-LITE&qid=1562508334&s=computers&sr=1-2
On order, will update once set up!
Seems like a reasonable Idea.
866 seems to be the max speed the quest will do, and the card lists that as its 5ghz max speed, so those two seem matched.
​
Is it safe to assume that you will only play VR in the room with the PC? I believe line of sight is needed for the bandwidth required for ALVR.
​
I presume you'd setup a new network name like "PC Network" and connect the quest to that for use with ALVR.
​
An alternative to this would be to hard wire your PC to your current router and then hard wire access points like these:
https://www.amazon.co.uk/Ubiquiti-Networks-UAP-AC-LITE-Access-Point/dp/B016K4GQVG/ref=sr_1_5?keywords=wifi+access+point&qid=1562332015&s=gateway&sr=8-5
The main difference with this approach would be that you'd have multiple rooms with line of sight to a 5ghz router/access point - useful if your computer room isn't big enough to really play VR in.
Looking at the spec sheet for the router, it support 802.11b/g/n in both , just not ac (as you noted). Is it a Titanium 24 or 48? If it's the 48, it also supports dual-band operation. In this case, a dual-band booster/extender may help, but remember that it'd be using your current wireless network to send its data. These devices are good for extending coverage to uncovered or poorly covered areas, not increasing wireless performance in an already covered area.
Anyways, the company is right in that getting a dual-band 802.11ac wireless access point would indeed improve your wireless performance. The one they recommended isn't a bad pick. It's not just an access point (which is all you need), but also a router and switch. For about the same cost, you could get a dedicated access point that will probably perform better than the Archer C7. The community around here is generally fans of Ubiquiti equipment like this $80 USD access point. Keep in mind it will probably require a bit more work and research than the Archer to set up.
Thanks yes the 1 you linked it the one, would this be the access point?
https://www.amazon.co.uk/Ubiquiti-Networks-UAP-AC-LITE-Access-Point/dp/B016K4GQVG/ref=sr_1_3?crid=1AYMFGJCX8IG5&keywords=ubiquiti+access+point&qid=1567070597&s=gateway&sprefix=ubiquti%2Caps%2C160&sr=8-3
How do you normally configure an SSID on these?
I'm going to upgrade my wireless in my house come fall (when it cools off below 110 in the attic) and I'm looking at the TP-Link EAP225 for about $65 as it should suite my needs. If I can get the EAP245 on sale for about the same price I'll go for that. I only have about 5 total active wireless devices (at the most) at any time, so the throughput of the EAP225 should be plenty for me, but your situation may be different.
(Oh, and I'm sure people will recommend the Ubiquiti Access Points too. They are on my watchlist for a sale, too...so whichever is cheaper is what I'll end up with).
That's what I thought, but I've failed to find any that I understand on amazon.
When I search https://www.amazon.co.uk/b/ref=sr_aj?node=430580031&ajr=0
I get stuff that looks like it's for commerical buildings. I get routers and powerline adapters and all sorts of other nonsense.
Anything I do find that I think might be what I looking for could be a fucking frisbee for all I can tell because they don't show pictures of what connects to it or give an explanation of how they work.
https://www.amazon.co.uk/Ubiquiti-Networks-UAP-AC-LITE-Access-Point/dp/B016K4GQVG/ref=lp_430580031_1_5?s=computers&ie=UTF8&qid=1524744511&sr=1-5
That for example I'm guessing could be it? But I can't tell if it rebroadcasts wifi or if it takes an ethernet connection. I don't know where it gets it's power supply from, it says power over ethernet and I don't have that but will it come with a power adapter as well?
Edit : And they all seem like massive overkill. It's going to be a very small amount of data and it's going to need a range of 2 feet of open air.
I can’t really tell from that link. Here’s the one I have:
https://www.amazon.co.uk/Ubiquiti-Networks-UAP-AC-LITE-Access-Point/dp/B016K4GQVG/ref=mp_s_a_1_1?ie=UTF8&qid=1524759312&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=unifi+ap+ac+lite&dpPl=1&dpID=31oux4k0ZCL&ref=plSrch
Through a ceiling will be probably no problem. You don’t need power near the AP on the Unifi models, as they use power-over-Ethernet so you can just use an Ethernet drop and leave the wall wart near your switch.
I’m not familiar with the cheaper ones but maybe someone else can chime in here.
cheapest ubiquiti is this . Couldn't this do the same job?
Probably cheaper if you find on ebay.
https://www.amazon.com/Ubiquiti-EdgeRouter-Advanced-Gigabit-Ethernet/dp/B00YFJT29C
https://www.amazon.com/Ubiquiti-Networks-Dual-Band-passive-UAP-AC-LITE/dp/B016K4GQVG