Reddit Reddit reviews Ubit 6 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

We found 9 Reddit comments about Ubit 6 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable. Here are the top ones, ranked by their Reddit score.

Computer Accessories & Peripherals
Computer Cables & Interconnects
Electronics
Computers & Accessories
SATA Cables
Ubit 6 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable
Slot color is sent randomly:Due to the shortage of raw materials, we have purchased the 2 color card slot for production, randomly send, it does not affect the riser's function.More Port option: molex, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.LED indicator and fuse are used on the board: Indicates the connection status between your devices.3 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
Check price on Amazon

9 Reddit comments about Ubit 6 Pack Latest PCI-E Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable:

u/viners · 6 pointsr/gpumining

I am having the same problem OP. It shows up as "working" on the bios screen, but when in the OS, it registers as "NVIDIA Corporation Device 2182 (rev a1)". When plugged into the x16 slot, it registers correctly as 1660 ti. So I guess it's the risers? These are the ones I bought: https://www.amazon.ca/gp/product/B076KLJR2Y

EDIT: Found the fix OP. Set the PCI-E speed to auto in the bios settings. You may have to update your firmware (I did).

u/realslizzard · 3 pointsr/gpumining

> https://www.ebay.co.uk/itm/Transfer-Type-Power-Supply-Fan-Open-Air-Mining-12-GPU-Case-Rig-Frame-For-ETH-/183066453295?hash=item2a9f9c652f

I know this has been discussed to death but using the molex to sata or 6pin to sata adapters are definately bad (another link that can burn down). If they were connected directly from the PSU with the OEM cables with no splitters or adapters it SHOULD be ok.

Rarely do I see it happen tho.
I bought this riser specifically for that so I can use 1 molex/sata per lane and have both options, I can even go 6 pin on all of them if I buy the cables but I don't trust 3rd party cables
https://www.amazon.ca/Ubit-Express-Graphics-Extension-Ethereum/dp/B076KLJR2Y/ref=sr_1_1?s=electronics&ie=UTF8&qid=1518274932&sr=1-1&keywords=ubit+riser

u/BruceInc · 2 pointsr/EtherMining

Do they look like this
Leboo 6-Pack PCIE Riser VER 007 PCI Riser 6 PIN 1x to x16 Powered Riser Adapter Card w/ 60cm USB 3.0 Extension Cable & PCI-E to SATA Power Cable - GPU Riser Adapter https://www.amazon.com/dp/B075FR7Q5Q/ref=cm_sw_r_cp_api_BKwDAbG6RFGSJ

Or more like this?

Ubit 6 Pack Latest PCI-E Riser Express Cable 16X TO 1X (6pin / MOLEX / SATA) With Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable https://www.amazon.com/dp/B076KLJR2Y/ref=cm_sw_r_cp_api_-KwDAb3Q5MJF4


Also if you for some reason can’t get the slot to work you can always get an m2 to pcie adapter. I found these to work very well for me
EXPLOMOS M.2 Key M NGFF to PCI-E 4X Adapter Card, 4 PIN Power Cable (2 Pack) https://www.amazon.com/dp/B074Z5YKXJ/ref=cm_sw_r_cp_api_CMwDAbSAQ8AW5

And these as well
Leboo M.2 NGFF to USB3.0 PCI-E X16 Slot adapter,Pci-E Converter Card Mining Riser Card 2280 2260 2242 M.2-M-key (No Cable Needed) https://www.amazon.com/dp/B078SRVJ2X/ref=cm_sw_r_cp_api_aNwDAbQ7T96HK

u/ivR3ddit · 2 pointsr/gpumining

I’m certain there are many other good ones available but I’m using these with my rigs. Really high quality (bottom is padded) and all arrived in perfect working condition.

u/mastrkief · 1 pointr/gpumining

I bought and have been using these and so far have had no problem with them but I've only been up and running for 2 weeks. Only difference between the one you linked and the one I linked from what I can tell is the positioning of the power connectors. Also my version has a power LED indicator to make it easier to tell that the riser is functioning. I don't see that on yours nor do I see a slide to lock in the GPU.

I have my reservations of the octominers. Looks like they're listening to the community's complaints and are released a new revision soon to address them so I might consider them for my second build.

Here is a good thread about the gripes that people have with Octominer.

u/woods0900 · 1 pointr/NiceHash

The risers are these ones:
https://www.amazon.com/gp/product/B076KLJR2Y/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

And I don't see why they wouldn't be compatible with my MSI 370A-Pro board...This board can support 6 risers according to MSI

u/videocardmining · 1 pointr/EtherMining

I think you got major issues with your risers and/or wiring... What kind of risers are you using? I use all Ubit latest version ones and they are solid, 0 problems.

https://www.amazon.ca/Ubit-Express-Graphics-Extension-Ethereum/dp/B076KLJR2Y/ref=sr_1_3?ie=UTF8&qid=1539193623&sr=8-3&keywords=ubit+riser

u/joentx · 0 pointsr/MoneroMining

Recommend UBit, I've installed hundreds of GPUs and these have been the most consistent
https://www.amazon.com/dp/B076KLJR2Y

u/smblt · -3 pointsr/gpumining

I would recommend Mailiya v006C, zero issues and very clean nicely soldered boards.

Mailiya v006C Wonderful risers.







Don't use Ubit v103C, those things are trash and caused me hours of headache. I opened 7 of them and only 4 worked. Poor soldering, splattered solder, missing solder, poor power. Even the ones that did work did not play nice with the MSI Armor series of cards. I wish I kept them longer to analyze but by the time I had enough I just wanted to get my money back. The ones here... do not buy.

Edit: Thanks for the downvotes. Fuck me for having a bad experience with your precious Ubit.