Reddit reviews UGREEN 6.35mm (1/4 inch) Male to 3.5mm (1/8 inch) Female Stereo Audio Adapter Gold Plated, 2 Pack
We found 20 Reddit comments about UGREEN 6.35mm (1/4 inch) Male to 3.5mm (1/8 inch) Female Stereo Audio Adapter Gold Plated, 2 Pack. Here are the top ones, ranked by their Reddit score.
UGREEN TRS 3.5mm female to 6.3mm male 1/4" to 1/8" audio adapter is a convenient and cost-effective way to connect smartphones, tablets, iPod or headphones with standard 3.5mm 1/8 inch plugs to audio devices with a 6.35mm 1/4 inch stereo jack, making your favorite headphones or other devices compatible with most pro audio and home audio equipment, such as amplifiers, mixing console, home theater devices or AV receivers.High Quality: This 6.3 to 3.5 audio jack converter made of solid brass copper, with a much longer service life compared with those plastic connectors with metal painting. 24K Gold-plated connectors resists corrosion and ensures minimal signal loss.Thoughtful Design: The stereo jack adapter dopting gear grinding technique, 360 degree grip treads help easy plugging and unplugging. Mini size and portable.Powerful Connectors: Stereo In and Out 1/8 inch to 1/4 inch TRS adapter. Note: This converter requires the plug with TRS 3 conductors, rather than TS(2 conductors) or TRRS(4 conductors).What You Get: UGREEN 6.35mm to 3.5mm Stereo Audio Adapter ×1.
You want something like this..
https://www.amazon.com/gp/aw/d/B01D82XXGO/ref=mp_s_a_1_8?ie=UTF8&qid=1518145017&sr=8-8&pi=AC_SX236_SY340_QL65&keywords=3.5mm+to+1%2F4&dpPl=1&dpID=41jqoWgXcXL&ref=plSrch
>a drum machine
Whenever you have questions like this, it immensely helps to tell us what drum machine you're using, and even what hi-fi set.
First, let's learn a bit about the plugs you may encounter
https://en.wikipedia.org/wiki/RCA_connector , also called "cinch plugs" are the ones that are most likely on the back of your hi-fi set somewhere. These come in pairs; red and white for right and left respectively. The ones you can use are called "aux" - short for "auxiliary", i.e. from some device that is not part of your hi-fi set. Do not use the ones called "phono" - those are intended for turntables and expect a certain type of signal that adheres to https://en.wikipedia.org/wiki/RIAA_equalization .
https://en.wikipedia.org/wiki/Phone_connector_(audio) , also called jack plugs, come in several sizes but only two are commonly used: the 6.35mm (1/4") and the 3.5mm minijack. Since most (professional) music equipment uses the 6.35 stuff, you can substitute "jack" with 6.35mm and "minijack" with the 3.5mm one. The 2.5mm is not that common and used for headphones.
So one interesting thing about the jack is how many black plastic rings you see. When you only see one close to the end, it's a mono cable; it only has two wires. When you see two - one at the end, one in the middle - you have a stereo cable. Earbuds for phones may even have three, and that's so that they can have a microphone and a stereo set of headphones all crammed in the same wire, but with most professional music equipment, you'll only encounter the TS/TRS.
Here's where it may get a bit confusing: TS cables are always mono, and are unbalanced cables.
TRS cables can be used as unbalanced stereo cables, or as balanced mono cables. The whole balanced/unbalanced stuff is a can of worms on its own that I'm not going to talk about here, so for now when I talk about "stereo" cables, I'm talking about TRS - so two black plastic rings instead of one.
The RCA plugs are generally only available in a mono variant, so you usually don't need to worry about that.
What hi-fi set do you have?
Let's start with the hi-fi set. If you have an aux input, and if it has such a red and white RCA input, you need a cable that ends in that. If your aux input is a 3.5mm input, you need a cable that ends in a stereo minijack.
What drum machine do you have?
OK. Let's assume you have an Arturia Drumbrute.
https://imgur.com/Xx4cOh7
As you see it's got lots of outputs. Which ones should be hooked up and how?
At the utmost right, there are headphone outputs. On the Drumbrute, you can plug in either a TRS (stereo) or a TRS minijack; both will send out the same signal, and you have a nice volume control especially for the headphones. This is offered as a convenience; they could've offered a single TRS output and request you to buy an adapter like https://www.amazon.co.uk/dp/B01D82XXGO/ (the link is purely for illustration purposes, not an endorsed product). This allows you to connect studio headphones (with a 6.35mm jack) or earbuds (with a minijack).
Headphone outputs are generally not suitable for anything but headphones.
Headphones are basically portable passive speakers; they need an amplified signal. While it won't break your hi-fi, it might cause the signal to be distorted. The reason for these to be separate is when you're using it live, you can listen to the signal in your headphones directly and send the rest to whoever's operating the mixing desk, so that you have your own volume control and all; basically a monitoring output.
Then there's the "Mix output". It's a single 6.35mm jack plug. There's a good chance (always double-check in the manual) that this is a stereo output. You can buy cables that go from stereo jack to a pair of RCA; in several cases these are only offered as stereo minijack, but with those adapters I've linked above, you can buy such a cable, an adapter, plug it in the mix out, and plug the other end in the hi-fi, and you're good to go.
The rest of the outputs are for the individual instruments. At that point, you should be looking for a mixer anyway.
What if you have a different drum machine?
Let's say you have a Roland TR8S:
https://imgur.com/7zPG2aN
As said, better to not use headphone outputs; but now the mix out is not a single output, but two. What can you do? Well - there are cables that have RCA on one end and a mono jack on the other. Those also come in glued-together versions so you only need one cable with two plugs on either end. If you have a hi-fi where the aux is just a stereo minijack, don't worry; you can get a stereo minijack to RCA cable, and RCA to mono jack adapters.
It is quite astonishing how many types of adapters there are; while it's better to have the cable just as one piece without adapters, one adapter is not going to degrade your signal. It's mostly a mechanical thing where a chain of adapters barely holding together only requires a yank in the wrong direction to break your equipment in a really bad way.
My drum machine is an SP404A. It has RCA plugs. Can I hook that up directly?
Yes - because it says "line out".
So that drum machine is for hiphop and I see people also using turntables and I'd like to do that too. What about turntables?
See the bit about using the phono input. If your hi-fi only has an aux input, get a cheap phono preamp; it turns a turntable signal into something usable for the aux inputs.
What if you want to hook up more instruments?
If you don't want to involve a computer, you need to get yourself a mixer. Lots of devices can do mixing; there are digital multitrack recorders that operate both as mixers and as recording devices. Mixing is essentially just a certain piece of functionality of adding signals together.
If you do want to involve a computer, you can get a mixer and run the stereo signal of that into a small 2x2 audio interface (left and right are mono signals, and something that offers a stereo input - either a separate left + right or as one plug - counts as a "2"), or you can get yourself a big audio interface that is effectively a digital mixer minus all the sliders and knobs, and run it in there.
So I've looked at some mixers and there's a new type of input on that mixer that you haven't described. It looks like a big circle with 3 holes. What's that?
Glad you asked! Those are XLR inputs. Instead of using plastic rings that may break off (the worst nightmare for anyone with a studio), they put 'm on 3 separate pins. These also come in a version that allows both XLR and jack plugs to be connected.
In general, those are used for microphones or for expensive gear that operates at higher voltage levels. Again, cables exist that can go from XLR to jack, but be careful with that; for some microphones, there's a 48 volt switch that works fine for certain types of microphones, but it'll fry others.
Do mixers accept turntable signals?
Generally not. Get a cheap phono preamp and follow the rest of the instructions.
Hope this helps! Don't blow up stuff, ask if you're not sure, and tell us what you've got.
audio cable adapter
https://www.amazon.com/UGREEN-6-35mm-Female-Stereo-Adapter/dp/B01D82XXGO/ref=sr_1_3
You should be able to just plug the monitors into the 1/4in monitor out, using the gain knob to adjust volume. What size jack are your monitors - 3.5mm? If so you can get one of these to plug them into the output on your mixer
Like most professional audio equipment, the Blackstar ID:Core 100 has a 1/4" (6.35mm) headphone jack, rather than the 1/8" (3.5mm) jack used on most consumer audio equipment. Most headphones come with an adapter in the box, but if yours didn't, you can buy one on Amazon.
I think the absolutel simplest solution to this would be to get one of these type of adapters, and keep it on always. That way, the broken 3.5mm is never getting pulled on.
Other solutions include cutting the whole jack off and rewiring, but i'd try this first.
Desk arm mic stands are pretty dope and cheap. I have this one and it has worked well enough for how cheap it is.https://www.amazon.com/Adjustable-Microphone-Suspension-Broadcasting-Voice-Over/dp/B00DY1F2CS/ref=sr_1_7?keywords=desk+mic+arm&qid=1564619752&s=gateway&sr=8-7
Extra xlr cables are always nice to have around. A pop filter is also nice, though you probably need one with that dynamic mic you'll be using. Headphone extension cables can be nice depending on how things are set up on your desk, and how long your headphone cable is. The Focusrite Solo also only has a quarter inch headphone jack, so if you don't have an adapter you could pick up one of those
https://www.amazon.com/UGREEN-6-35mm-Female-Stereo-Adapter/dp/B01D82XXGO/ref=pd_lpo_sbs_267_t_1?_encoding=UTF8&psc=1&refRID=SQ828YGS55DGEP084TVVOverall you should be good though!
Edit: Also any kind of adapter to hook up the RCA outputs on the back of the Solo to your pc speakers if you have some too!
Toothpaste, like 3 backup deodorants, gallon jug of water, pack of clean hanes tees, like 5-10 rolls of quarters if he's traveling cross country (consider: street parking at meters also!). Garbage bags are useful for dirty laundry.
idk what type of music he makes but when I tour 1/4" to 1/8" adapters come in handy when laptops / shitty PAs are involved
If he reads, a book from his favorite author or a new game for his DS to help keep him entertained. If he gets sick, dramamine or other motion sickness tablets.
What does he play? An extra tuning key for drums or some extra strings for his guitar / bass could be helpful. If he's a singer, something soothing to the throat? Ginger Ale is my favorite.
Just spitballing here.
Man, I'm still confused. Mind showing me exactly what I need on Amazon?
Edit: I ordered this for the headphones: https://www.amazon.ca/gp/product/B01D82XXGO/ref=ox_sc_act_title_1?smid=AKXVBT49GGF3B&psc=1
And I ordered this for the mic: https://antlionaudio.com/products/antlion-audio-xlr-power-converter
Is that correct?
Unfortunately he can't just go from the Scarlett interface to the speaker/monitor without an amplifier. The interface is only powerful enough to send signal to the computer or headphones.
You'll need to set it up in this chain: Scarlett headphone out >> [1/4" to mini stereo] (https://www.amazon.com/Ugreen-6-35mm-Female-Stereo-Adapter/dp/B01D82XXGO/ref=sr_1_5?ie=UTF8&qid=1478886878&sr=8-5&keywords=1%2F4+to+3.5+mm) >> [mini stereo to stereo RCA] (https://www.amazon.com/Gemini-PH62089-Stereo-Mini-Male-RCA-Male/dp/B0001GAOE0) >> RCA plugs into amp (search speaker amplifier on Amazon) >> lastly, go from amplifier to speaker/monitor ... the applicable cable for this depends on what type of amplifier you buy and whether it has raw copper outputs or 1/4" outputs. For 1/4" outputs use 2 of what theknyte posted, one for each speaker.
Audio setups can be annoying but this is precisely how I would do it.
I didn't recommend the Korg because I don't have any personal experience with it. I really don't think you could go wrong with either though. Definitely watch video reviews for both and make the most educated decision you can. You can get an adapter for the headphone jack and use your normal headphones without issue. Something like this.
https://www.amazon.com/dp/B01D82XXGO/ref=cm_sw_r_other_apap_ft4PvrNlCjEJv
I'm off to bed now but if you have other questions, you can reply to this or pm me and I'll answer when I can.
Combining audio isn't as simple as duplicating it unfortunately. You'll want something like this. The problem with this is that it uses 1/4 inch stereo jacks so if you have 3.5mm audio jacks you will need adapters to convert 3.5mm to 1/4 inch like these.
No reason an RCA to 1/8 converter wouldn't work that I can think of. Now for when it comes to 1/4 to 1/8, I use this and this
BTW- I edited my post a bunch as it was a bit messed up at the beginning so I suggest re-read it, it's in final form now :)
You could use your nice Audio Technica mic with the above procedures, as long as you understand that Audio Technica mic audio will also be your chat audio for the game. The whole setup doesn't care WHERE your mic audio comes from as long as it comes into Channel 1.
In this case you MIGHT be able to just plug the A40's TRRS straight into the 802's Phones plug using a stereo 3.5mm to 1/4" phono adapter, and just use them as headphones (nothing else). If that doesn't work right then use the TRRS adapter (female TRRS to dual male 3.5mm) I linked near the top of the above post.
truthfully you dont need a dac/amp for the pc37x, it helps but its really unnecessary for gaming. I bought mine because i love to listen to high quality music and sound editing. But thats up to you to decide what you want, below are links to the things i would suggest
something like this
https://www.amazon.com/Conwork-Extension-Auxiliary-4-Conductor-Connectors/dp/B01DRQFF94/ref=sr_1_9?crid=50NIYL5HIDX6&keywords=3ft+microphone+cable+extention&qid=1558729567&s=electronics&sprefix=3ft+microphone+%2Celectronics%2C157&sr=1-9
https://www.amazon.com/UGREEN-6-35mm-Female-Stereo-Adapter/dp/B01D82XXGO/ref=sr_1_5?crid=18M6RPIPP89QG&keywords=3.5mm+to+1%2F4&qid=1558729595&s=gateway&sprefix=3.5mm+to+%2Caps%2C166&sr=8-5
Okay, I saw your post in another help thread. It sounds like you have a headset that you want to plug into your PC. I assume your PC has separate ports for the headphones and microphone. Something like this would work. If the ports on the PC are 6.3mm, just add these adapters to the ends as required.
There are many options, probably your cheapest is to use a set of headphones (even a set of earbuds, even tho they'd probably suck for piano music) on the keyboard itself.
​
If you REALLY want to output to a computer and listen through the computer headset, you'd need to get a cable to go from the output of the piano to the line in of your computer - just know there may be latency induced in this setup causing it to sound a bit weird as you play.
​
I can't tell from the manual, but I'm guessing the jack on the psr-260 is a 1/4" stereo jack? Your current headset is it USB or is it 1/8"? if it's 1/8" and the keyboard has a 1/4" jack, you can get an adapter from Amazon fairly cheap like : https://www.amazon.com/UGREEN-6-35mm-Female-Stereo-Adapter/dp/B01D82XXGO/ref=pd_lpo_vtph_267_tr_t_2?_encoding=UTF8&psc=1&refRID=CG04RASEQKH0XXVPD71V
​
The most expensive path would be to setup a virtual instrument on the computer, get a MIDI to USB adapter and connect the midi of the instrument to the computer and use the virtual instrument to generate the sound as you press the keys - but this would require a bunch of extra hardware and software.
I'd just use the one you're currently using, and get a 3.5mm to 1/4" adapter. A different/new cable wouldn't really affect sound quality if that's what you're looking for.
adapter (tell me if it’s the wrong link)
You will need volume control and amplification with a headphone amp.
Cheap:
Add 1/4 to RCA Adapter and 1/4 to 3.5mm Adapter if you don't already have one.
Much better: