Reddit Reddit reviews Vantec CB-ISATAU2 SATA/IDE to USB 2.0 Adapter Supports 2.5-Inch, 3.5-Inch, 5.25-Inch Hard Disk Drives (Black)

We found 61 Reddit comments about Vantec CB-ISATAU2 SATA/IDE to USB 2.0 Adapter Supports 2.5-Inch, 3.5-Inch, 5.25-Inch Hard Disk Drives (Black). Here are the top ones, ranked by their Reddit score.

Computer Accessories & Peripherals
Computer Cables & Interconnects
Electronics
Computers & Accessories
SATA Cables
Vantec CB-ISATAU2 SATA/IDE to USB 2.0 Adapter Supports 2.5-Inch, 3.5-Inch, 5.25-Inch Hard Disk Drives (Black)
Easily Add Storage to Any System with USBSupports HDD Capacity Up to 2TBTransfer Rates Up to 480 Mbps with USB 2.0Hot-Swappable: Plug and Play without RebootingCompatible Windows PC or Mac with Available USB 2.0 Port
Check price on Amazon

61 Reddit comments about Vantec CB-ISATAU2 SATA/IDE to USB 2.0 Adapter Supports 2.5-Inch, 3.5-Inch, 5.25-Inch Hard Disk Drives (Black):

u/theem3thod · 22 pointsr/DataHoarder

I keep this guy around for just that.

https://www.amazon.com/gp/product/B000J01I1G

u/just_some_tech · 10 pointsr/techsupport

It is a 44 pin ATA drive. 4 of the pins provide power. If you are going to attach it to a PC that has IDE on board, you are going to need an adapter like this one... http://www.amazon.com/gp/aw/d/B0072UKJ3O

Otherwise you are going to need something like this... http://www.amazon.com/gp/aw/d/B000J01I1G/ref=mp_s_a_1_1?qid=1383047362&sr=8-1&pi=AC_SX110_SY165_QL70

u/benderunit9000 · 10 pointsr/techsupport

I know that Samsung SSDs come with software (data migration) to handle this process for you. Just need to get something like this so you can have both drives hooked up at the same time to the same machine.

u/rf_king · 8 pointsr/pics

I've used them at work for old machines that needed to be recovered. We made image backups of all hard drives using this converter since it works with IDE drives.

IDE/SATA to USB

u/Remo_253 · 6 pointsr/techsupport

As others noted, yes, a relatively easy thing normally. There are a few possible difficulties however.

Low cost machines from Dell. HP, etc. tend to not anticipate an end user wanting to upgrade so the machine has just what it needs, nothing more. Sold with one drive? Then no room to mount a second drive, no additional power connectors for a second drive.

So, does the new machine have an open cage to mount the drive in? Does it have the needed SATA power connection and is it near where you'll mount the drive?

Additionally, when the machine boots will it see the OS on old drive and try to boot from it (which will fail)?

All of these issues can be bypassed by using a USB adapter such as this one on Amazon: [Vantec USB adapter](https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/ref=sr_1_2?
ie=UTF8&qid=1502495463&sr=8-2&keywords=usb%2Bdrive%2Badapter&th=1) or, if you're going to keep it plugged in, a dock like this one: USB Docking Station.

With either of those there's no need to open the machine, just connect via USB.

Remember also that old machine is most certainly recoverable. If nothing else a fresh Win 10 install will have it working unless, unlikely but possible, you actually caused physical damage of some sort to the motherboard. If you want to get it running again post here and we can work on it.

u/Diesel4719 · 6 pointsr/computertechs
u/Luke_Attamadik · 5 pointsr/techsupport

Something like this is super useful. I've gotten data off a couple drives with these.

http://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/

u/rebeldefector · 5 pointsr/techsupport

I've been using devices exactly like that, with sata in addition, to back up data for customers for over 7 years now, with no problems.

I wouldn't worry about it.... the ones I use are from vantec, and come with a power supply that gets very heavy use... I think we have 4 of these in my shop right now, I've only ever seen one die, and never seen one cause problems.

I highly recommend that particular brand, and that particular device; don't settle for cheap imitations.

u/pipernga · 3 pointsr/dogemining

http://www.amazon.com/gp/product/B000J01I1G/ref=ox_ya_os_product_refresh_T1

^ Just bought one of these to have on hand. Thanks to the people who suggested this to me. I didn't even think about getting one.

Edit: And for anyone wondering, no that is not a referral link.

u/mrmax1984 · 3 pointsr/techsupport

A cheaply or incorrectly made adapter could send too much power to the drive. This happened recently with faulty USB-C cables, which resulted in phones being fried. Just select one based on good reviews, and you should be alright. This one looks almost identical to the on I purchased at Tigerdirect ~10 years ago, which has worked great.

u/t_SUB · 3 pointsr/buildapc

If you're gonna use it on a PC made in the last decade, you're gonna need something like this: https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G

u/BillDaCatt · 3 pointsr/windows

No, probably not. I assume you are looking at one of those USB to PS2 mouse adapters. You can try it, but I doubt anything will happen. You might be better off getting a PCMCIA SD card adapter.

Does your laptop have a network connection? Access to the Internet? If so, you might be able to copy files to or from your laptop over the network, either via a local network share or something like Google Drive or Dropbox.

If none of those options are viable, you could pull the laptop's hard drive and transfer your files using an IDE to USB adapter and another computer.

u/megared17 · 3 pointsr/techsupport

No. The way you would do that, is to open the computer, take the hard drive out, and then use a USB to SATA hard drive adapter to connect it to the working PC.

Something like this:

https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G

(And I will add, you already have the answer to "how to fix my PC" which is to wipe the drive and do a fresh OS install)

u/merckill · 3 pointsr/techsupport

You need to pull back on the green tab so that it's in the same position as the others, then pull the hdd out. They fit pretty snug in those caddys so it may take a little force. Check around the 1:40 mark in this vid.

Also, I've used this for a long time to connect ide-usb.

u/Mudvillain · 3 pointsr/techsupport

You can try a SATA/IDE to USB adapter. Basically, what you have to do is to take the HDD out of the laptop and connect it to another computer that works through this adapter, the same way you do with a flash drive.

u/supadoggie · 2 pointsr/techsupport

Oh. Then it may be IDE. You'll need to convert 2.5" IDE to USB.

I have one of these and it can convert most things to USB (except mSATA) http://amzn.com/B000J01I1G

If you get that, you'll be able to use it, whatever the drive type is.

u/ccbbb23 · 2 pointsr/techsupport

Yes. That works great. Or if you want to go the external route, get one of these IDE or SATA to USB adapters.

u/NominallyMusing · 2 pointsr/recording

you could plug it into the computer with an audio cable, but it would just be the analog mixed/mastered tracks. You may need a usb input device like this http://www.sweetwater.com/store/detail/UFO202


Otherwise it looks like the hard drive itself can be removed from the BOSS and accessed directly on a PC. http://thestudiofiles.com/?p=241
You would need something like this http://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G to connect the internal IDE hard drive to a USB input. Inside should be all the raw WAV recordings.

u/masterf99 · 2 pointsr/techsupport

Get yourself a Hard Drive Transfer Kit, this little guy has saved me more times than I care to remember! It allows you to plug any HDD (IDE or SATA), into a USB port on any PC, and transfer files as needed. Now the HDD has to be functional for this to work, but it's great for situations just like you are in, best $20 I ever spent!

u/Phombus · 2 pointsr/AskTechnology

get a usb to ide/sata cable like this http://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/ref=sr_sp-atf_title_1_1?ie=UTF8&qid=1382998317&sr=8-1&keywords=usb+ide+sata+adapter
and then run file recovery on the hard drive with a file recovery program
Free version for windows: http://www.piriform.com/recuva
Good luck!

u/sglville · 2 pointsr/techsupport

If you need to check the hard drive just pull it and use a USB adapter. Not sure what kind of drive is in that laptop so get an adapter that does sata/ata. Something like this will probably work https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G

u/Dr_Dornon · 2 pointsr/computertechs

You can, but no guarantee it'd boot. I was able to swap a W10 drive to another laptop also running W10, but W7 on a made for W10 device might have driver issues.

Best bet is to buy something like this and just plug it into the new laptop via USB and just move it all over that way.

u/JMMD7 · 2 pointsr/techsupport

I'd just go with something like this:

https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G

PATA/IDE enclosures are not too common anymore. This is a decent solution for pulling data off old drives.

u/PhantomWare · 2 pointsr/DataHoarder

I've always had good success with data migration kits such as this one , you could always get a USB 3.0 model as well.

u/pre1014 · 2 pointsr/DIY

By your post I'll assume this isn't what you want, but I have one of these and its way more useful. If you get an enclosure for a 2.5" hdd, that's all you can use it for. The adapter I got can do 2.5 and 3.5" IDE HDDs, sata HDDs, as well as sata and IDE optical drives (damn near anything).

u/Vinylpone · 2 pointsr/techsupportmacgyver

I have one of those things http://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/ref=pd_bxgy_pc_img_z , except an different version without that nice on/off switch, it saved my life a lot of times already when I had to backup a hdd or use an external cd to install windows/linux on older notebooks.

u/tr1ppn · 2 pointsr/Random_Acts_Of_Amazon

Mike Mike Mike Mike Mike Mike

As seen on my electronics WL

For anyone who doesn't know what it is, it's an AWESOME tool that allows you to take any hard drive and connect it to your computer via USB. This is extremely useful for computer techs when a drive is dying, a machine won't boot, or you need data from a drive and don't have the password to get in. There's one in my office, but I also need one for myself, as I do a lot of work on the side.

Thanks for the contest!!!

u/jhaluska · 2 pointsr/minimalism

Nonsense. It's not like they stopped having equipment in the world to get the data off of the drives.

You can get USB IDE connector. Then all you need to do is pull the drive out and copy it to newer medium. I have one of those and find it handy for imaging drives on laptops.

u/boundbylife · 2 pointsr/AskTechnology

Basically.

Let's assume you have a 1 year old computer laying around. It will have a SATA drive, which is a connection standard the drive uses to transfer data to and from the PC. Assuming the computer only has one hard drive, this will be the OS disk. As such, you can't disconnect it - you'll need it to run the OS while you grab your data at the end.

So look at the XP hard drive from the XP machine, and compare them to this picture. Not all modern computer have IDE connections any more, so if your hard drive has an IDE connector, you may need an adapter, like this one on Amazon. Connect the IDE and a female Molex connector and start the computer up. If ithe XP drive is SATA, just find an open SATA port on the motherboard and a free female SATA power connector and start up the computer. (Again, if you cannot find a free SATA port, that adapter I linked should have one.)

Either way, eventually you should reach your modern Windows install, and the OS should register the old HDD as a generic hard disk. From there, you may recover any data you like, or just leave the drive connected (I wouldn't recommend it without a wipe first, but that's personal preference).

u/Pantry_Inspector · 1 pointr/techsupport

I'd recommend you take it somewhere than can take the drive out and back it up, so you can access the files. Or you could pick up a sata to usb adapter and do it yourself, but you'd likely have to order one from Amazon, or MAYBE pick one up at Best Buy. Amazon

You could also create a bootable Linux flash drive, and back the files up through Linux. Here's a guide to that.

u/Liquidretro · 1 pointr/techsupport

Yes and since it's a 3.5" drive the OP will probably need a power adapter as well. These are usually included. I have something like this that works well http://amzn.to/2ljFl9i for temporary use.

u/0x00000042 · 1 pointr/techsupport

Something like [this] (http://www.amazon.com/gp/aw/d/B000J01I1G/ref=pd_aw_sim_147_of_6?ie=UTF8&dpID=41mJqEr4cwL&dpSrc=sims&preST=_SL500_SR100%2C100_&refRID=1SXCC5CFDNMP4W2JXVN7) should work.

As for a gift, I'd rather you make a donation to a worthwhile charity such as a local food bank, animal shelter, or tech education program.

u/LocalAmazonBot · 1 pointr/dogemining

Here are some links for the product in the above comment for different countries:

Amazon Smile Link: http://smile.amazon.com/gp/product/B000J01I1G/ref=ox_ya_os_product_refresh_T1


|Country|Link|
|:-----------|:------------|
|Spain|amazon.es|
|France|amazon.fr|
|Germany|amazon.de|
|Canada|amazon.ca|
|Italy|amazon.it|




This bot is currently in testing so let me know what you think by voting (or commenting). The thread for feature requests can be found here.

u/Naruhodo · 1 pointr/techsupport

I'm afraid so. It doesn't even goes to the point telling you about 'bad sectors blablabla'? What is left now is trying to salvage files.

A replacement HDD will be your next purchase and I hope you have your Vista install CD, or you can put some Linux on it, don't think the machine qualifies for Win7.

This could become handy, once you remove the HDD from the laptop it will allow you to connect it to another PC and transfer files.

u/Thurid · 1 pointr/techsupport

Something like this can help you transfer data off an old hard drive to a new pc.

u/lowbread · 1 pointr/techsupport

thank you. would this work?

u/may231998 · 1 pointr/techsupport

I might try this little jewel.
http://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/ref=sr_1_1?ie=UTF8&qid=1376335280&sr=8-1&keywords=usb+hard+drive+adapter

Hook it up to another computer and see if windows recognizes the drive. Then you can at least pull data off of it.

Other than that there is a program called spin rite that works (sometimes) to clear up drive read trouble. You'll have to download it and burn it to a bootable cd. boot to the CD and point it to your hard drive. It will take overnight to run a whole spin rite repair function.

https://www.grc.com/spinrite.htm

u/PrinceParadox · 1 pointr/techsupport
  1. It needs power some will work off USB, You can but don't have to. This is a cheap and effective one that we used at work for years. http://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G
  2. Doesn't matter, if you aren't going to be using it as a place to play games off instead of just copying the data get 3.0 if your laptop has supports 3.0. 2.0 is going to be MUCH cheaper.
  3. If you're going to permanently use it as a external maybe Price is a factor if this is a one time deal, then no just buy what ever is on sale.
u/bobroberts7441 · 1 pointr/techsupport

Connect the drive to your USB with this.

Run dban to erase the drive.

If he claims you erased the drive counter that he is an idiot and did it himself.

u/nodogo · 1 pointr/pcmasterrace

https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G

they also make a SCSI version but I couldnt find it in my quick search.

u/jpaek1 · 1 pointr/techsupport

I don't know that there is an official "proper" way to back up data from a hard drive after a failed update/install. In this case, you have several options available. You can use something like a Linux Live distro to read the files on the drive and copy over anything important to an external hard drive or usb/thumb drive. You could also remove the hard drive completely and put it in another computer to copy files over or use a SATA/USB device like this to hook the hard drive up to another computer/laptop via USB: https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/ref=sr_1_6?ie=UTF8&qid=1485921299&sr=8-6&keywords=sata+usb+adapter

As far as doing a fresh install, that part should be relatively easy. You can download Windows 10 and either install it to a USB or burn the ISO to a DVD using Microsoft's Media Creation Tool: https://www.google.com/#q=windows+10+media+creation+tool

As far as reformatting, Windows 10 will give you an option to do that on install. I think by default it just asks if you want to save files or do something else and you can pick to format. I usually just delete/format then tell it to install when that window comes up during install.

As far as backing up data after everything is set up - a good online backup and a local backup are pretty standard and usually easy to set up. Even using Windows you can schedule file backups to either remote networked drives or just other hard drives attached.

RAID setups are pretty popular as well, just note that Mirrored raid is more for protection against drive failure (hard drive crapping out) than it is for data protection as data is written to both drives at the same time RAID 1.

Hopefully this helps you out a bit.

u/Emerald_Flame · 1 pointr/buildapc
u/joe_bogan · 1 pointr/techsupport

Yeah, you can take the the drive out and get a caddy for it to connect to another computer via USB and it will just show up as an external HDD (provided it isn't encrypted).

https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/ref=sr_1_8?ie=UTF8&qid=1539829156&sr=8-8&keywords=2.5+to+usb

u/lovelyspecimen · 1 pointr/pcmasterrace

A kit like this will work:

https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G

You can also search "ide to usb" and find other options.

u/vinylbobs · 1 pointr/retrobattlestations

I use this

https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G


It lets you plug in SATA and IDE drives, and it comes with a molex power supply to power them

u/FriendlyITGuy · 1 pointr/techsupport

If the PC boots and turns on you can use Hiren's Boot CD by sticking it on a flashdrive with Yumi and boot to the USB. Then use Parted Magic or Mini Windows XP off Hiren's and copy your files to another flashdrive or external hard drive.

The alternative is to buy something like THIS and remove your HDD and attach it directly to another computer.

u/[deleted] · 1 pointr/techsupport

1

2

3

Or search for similar ones elsewhere.

Or.. test the seagate dock with another hard drive if you have one lying around. You should be able to plug in any internal HDD into it. If it works, it's not the dock at fault.

u/furrball12 · 1 pointr/computer_help
u/supersdf · 1 pointr/LifeProTips

You could also buy something like this and still have it as an external drive. I also use this to easily hook up HDDs and grab data off of them instead of having to put them in the computer. You could even just buy a regular drive and this and probably save money, just like OP is saying. Obviously you don't get the added protection of the enclosure, but when not in use you could always store the drive in it's original protective packaging from shipping.

u/Ottonym · 1 pointr/SeattleWA

They have gadgets that can connect a drive (IDE/SATA/etc) to an adapter that gives you a USB connection - it basically makes a drive into a USB drive.

IDE to USB: https://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G

SATA to USB: https://www.amazon.com/StarTech-com-USB3S2SAT3CB-Drive-Adapter-Cable/dp/B00HJZJI84

You could pull the drive from this busted screen machine and then use this gadget to plug into another computer and then use tools to triple-wipe the drive.

Popular drive wiping tools: https://www.techrepublic.com/blog/five-apps/five-hard-disk-cleaning-and-erasing-tools/

u/jonny- · 1 pointr/applehelp

get something like this, and a usb-usbc adapter.

u/red286 · 0 pointsr/bapccanada

Pretty sure no one makes any docks that support IDE anymore.

I'd recommend getting this adapter instead.