Reddit reviews VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump for Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord (Black)

We found 27 Reddit comments about VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump for Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord (Black). Here are the top ones, ranked by their Reddit score.

VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump for Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord (Black)

【Water Flow Control】 An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 80GPH【Ultra Quiet Design】 Come with 2 Nozzles (0.33in and 0.51in). High quality motor provides a quiet environment for you. The impeller shaft is stainless steel for long life span and corrosion resistance【Detachable and Cleanable】 No need any tools to detach it, easy to separate, easy to clean.【Suction Cup and 5.9Ft Power Cord】 Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally【Wide Application】 This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc. Backed by professional after-sale service within 24hrs

Check price on Amazon

27 Reddit comments about VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump for Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord (Black):

u/CannabisGrowGuide · 15 pointsr/microgrowery

Sprayer - $13.00 link to long go search

Water pump - 8.49 https://www.amazon.com/VicTsing-Submersible-Aquarium-Fountain-Hydroponics/dp/B00EWENKXO/ref=sr_1_4?ie=UTF8&amp;qid=1519928484&amp;sr=8-4&amp;keywords=water+pump

Collars - 25 for $7.00. ( that’s .28 a piece if you are wondering) they have them cheaper too...
https://www.amazon.com/25-PACK-RED-Sprayers-Machines/dp/B01I2A2LNS/ref=sr_1_12?s=lawn-garden&amp;ie=UTF8&amp;qid=1519928528&amp;sr=1-12&amp;keywords=Cloner+collars

5 gal bucket w/ lid $5.00

That’s 33.49 and you can build this exact setup with this shit. If you can scrounge a piece of rubber or hose to connect shit your done. ✌🏻👍🏼

u/Faust5 · 8 pointsr/microgrowery

Here's the album with descriptions.

Parts list:

Submersible aquarium pump. This way, I'm using electricity to pump water upwards, and don't need to elevate my water tank like in a Blumats system.
Pipe fitting to attach a manifold to the pump. I got one at my local hardware store, but I think this is the same thing.
3/8" tubing to connect the pump to the manifold.
A kit with a bunch of 1/4" tubing to actually deliver water to the plants.. You could probably do it cheaper if you knew exactly which components you needed to buy, but I didn't so ¯\_(ツ)_/¯
Manifold.This takes the water that comes from my pump and splits it into up to 8 1/4" lines to deliver to plants.
5-gallon bucket. I already had one for vacuuming up my water, but you can get one for like 5 bucks at Home Depot.

Total cost: ~$60. Not having to pH, add nutes, add calmag, etc. individually to like 10 individual cans of water: priceless!

u/ToadScoper · 4 pointsr/Aquariums

Here’s a solutions- go to a local hardware store or tractor supply or landscape store and try to find an all purpose tub, storage tote, or practically any large container, somewhere around 30-50 gallons. Most of these tubs are fish safe, and are very cheap. For filtration use a large sponge filter and pump which are a very cheap and a effective alternative to normal filters. I wouldn’t worry about heat at the moment as this is meant to be temporary, and goldfish can handle it briefly. I wouldn’t but any decorations or substrate in the tub, just leave it bare. This setup is actually widely used in the goldfish hobby, so it’s a great choice.
Here’s the supplies list on amazon for your convenience, but keep in mind you could also go and look for these products cheaper elsewhere and don’t have to be the exact ones

Sponge filter-
Bacto-Surge High Density Foam Filter https://www.amazon.com/dp/B00GOFPX9I/ref=cm_sw_r_cp_api_i_D0G6AbC8B1HRS

Pump-
VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump For Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord https://www.amazon.com/dp/B00EWENKXO/ref=cm_sw_r_cp_api_i_J2G6Ab01249QW

Air tube-
Penn Plax Airline Tubing for Aquariums –Clear and Flexible Resists Kinking, 25 Feet Standard https://www.amazon.com/dp/B0002563MW/ref=cm_sw_r_cp_api_i_l3G6AbXFY7BEV

Plastic Tub-
Rubbermaid Commercial FG424300BLA Structural Foam Stock Tank, 50 Gallon Capacity https://www.amazon.com/dp/B000NPBLAU/ref=cm_sw_r_cp_api_i_U5G6Ab4CHSP90

Cycling biology-
Fluval Biological Enhancer for Aquarium, 8.4-Ounce https://www.amazon.com/dp/B00FPIZ8Y0/ref=cm_sw_r_cp_api_i_26G6AbAR5QBRK

u/YoungyYoungYoung · 3 pointsr/AnalogCommunity

You will need a pid temperature controller, water pump, and heating unit, as well as some basic things (a bit of sheathed wire, things to cut and strip it, screwdriver, electrical tape) to wire everything up. The controller and heater can be substituted for cheaper components. You should also get a resistance thermometer (search on ebay, it's like $1) to get higher accuracy than a thermocouple.

pump

controller

heater

I hope this will help.

u/kronickhigh · 2 pointsr/PlantedTank

I use five gallon buckets, and I bought a small water pump on Amazon, pumps the water in slowly disturbing nothing. I generally just let the hose pour water down the side of the glass.

https://www.amazon.com/gp/aw/d/B00EWENKXO/ref=mp_s_a_1_3?ie=UTF8&amp;qid=1504375762&amp;sr=8-3&amp;keywords=water+pump

u/Citizen_Sniiiiiiiips · 2 pointsr/Aquariums

Seriously. $9

u/CarbonGod · 2 pointsr/firewater

VicTsing 80 GPH (300L/H) Submersible Water Pump For Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord https://www.amazon.com/dp/B00EWENKXO/ref=cm_sw_r_other_apa_ydEkyb7Z76REJ

u/technolengy · 2 pointsr/Homebrewing

apartment brewer checking in! A friend of mine turned me on to the method she uses for her immersion chiller (and I've seen around the internet a bunch) and it works great. 20+ft of copper coil, two vinyl tubes to attach, a submersible pump (kinda like this) and a bucket. attach one vinyl tube to pump and coil, other end goes from coil to sink. Fill a bucket, put pump in bucket and go to town. After 5 or so minutes the water coming out of the tube into the sink has cooled to where you can put it back in the bucket (adding a few frozen water bottles to the bucket) and reuse the water.

no need for garden hose or crazy business!

u/Nf1nk · 2 pointsr/CatTaps

Something like this would probably work.

https://smile.amazon.com/VicTsing-Submersible-Aquarium-Fountain-Hydroponics/dp/B00EWENKXO/ref=sr_1_fkmr0_2?ie=UTF8&amp;qid=1535763850&amp;sr=8-2-fkmr0&amp;keywords=small+water+pump+for+fountain+cordless

u/yourfavo · 1 pointr/Homebrewing

So, I ended up buying [this] (http://www.amazon.com/gp/product/B00EWENKXO/ref=oh_aui_detailpage_o04_s00?ie=UTF8&amp;psc=1) on amazon. Used it on Sunday brewing a saison. While it worked as I planned. It did not push enough water though and ended up taking about an hour to chill my 6 gals of wort. So I didn't save any time... yet. The one I purchases was 80 GPH, I see that OSU_CSM had a 200 GPH one. Do you think that is sufficient to go through 25' of a CFC? Should I look for a bigger one? I'm not ready to give up on the CFC yet!

u/revrobbcat · 1 pointr/sousvide

I'm using this and this in a turkey roaster. Unless you really need the WiFi component, that controller seems a little high.

u/MaxShadowCat · 1 pointr/Aquariums

I bought this pump: https://www.amazon.ca/gp/aw/d/B00EWENKXO?psc=1&amp;ref=yo_pop_mb_yo_pop_mb_pd_t2

It has a nob you can turn to decrease the flow. Its perfect and cheap and will work way better than using sponges

u/Jono89 · 1 pointr/Homebrewing

Wired this pump to this controller as per the wiring diagram it came with. Very straight forward.

https://www.amazon.ca/gp/aw/d/B01IBK9I12/ref=mp_s_a_1_7?ie=UTF8&amp;qid=1498065211&amp;sr=8-7&amp;pi=AC_SX236_SY340_QL65&amp;keywords=inkbird&amp;dpPl=1&amp;dpID=414FQKzu0QL&amp;ref=plSrch

https://www.amazon.ca/gp/aw/d/B00EWENKXO/ref=mp_s_a_1_1?ie=UTF8&amp;qid=1498065289&amp;sr=8-1&amp;pi=AC_SX236_SY340_QL65&amp;keywords=Aquarium+pump&amp;dpPl=1&amp;dpID=41%2Bn%2BaJtwfL&amp;ref=plSrch

u/o1001o1001o · 1 pointr/PlantedTank

Just picked up This one

Thanks for the help though! I have amazon prime so I tend to go for the free 2 day shipping

u/arkieguy · 1 pointr/sousvide

True. And in total nerd fashion, I dropped one of these in the bath too. Not sure it made any real difference, but it made me feel like I had a "real" immersion circulatior. ;)

u/Dent7777 · 1 pointr/microgrowery

u/2-Skinny · 1 pointr/Aquariums

I use one of these to pump the water out of a food-grade 5 gallon bucket where I let the water condition with Prime for a week before water changes.

u/rvkUJApH34uqa5Wh8M4K · 1 pointr/firewater

What size of pump is needed? I'm thinking this might do the job. Will probably need to suck the air to start it but after that it might work.

u/Battered_Unicorn · 1 pointr/CannabisExtracts

It sounds like your talking about the budget glass vacuum distillation units found on ebay/amazon. If so, these may work for your needs but more info is needed. If you intend to distill/recover the ethanol and make a concentrate like shatter or wax then a budget glass distillation kit like this may be what your looking for. It would also need a heating mantle of the appropriate size($60-120), a small water pump like this, some krytox ptfe glass joint grease(gpl 205 works well), and a vacuum pump. Something like this for $50 would work but would require an oil change nearly every other run due to ethanol contamination, a ethanol compatible diaphram pump would be preferable but much more costly. A used savant gp-110 is what i use and can be found on ebay for about $150(do not re-use ethanol that passes through a used pump). For long runs I add a small desktop fan in front of it to keep it cool.

Vacuum distillation is necessary for Shatter/Wax consistancy because without the vacuum, open air distillation will decarb the THC-A to THC and leave you with a sappy product. If you intend to make THC distillate, a shortpath setup will allow you to just distill the ethanol fraction and make distillate from your remaining product. It will also require pretty much the same accessories as the vacuum reflux distllation kit I listed. The only big difference from a short path vs reflux kit (which I prefer for ethanol recovery) is the added reflux portion which will help you maintain your ethanol's proof a bit better. Also the vacuum pump for a distillate shortpath setup needs to pull a lower vacuum rating than either of the pumps I mentioned, and will typically be one of the priciest components in this setup.

u/hatperigee · 1 pointr/Cooking

I may actually improve on the design a bit and add a small circulating water pump like this, though I may have to think about this design a bit since I'm not sure that the pump will like the warmer water it would be dealing with..

u/flipflopgooblegarb · 1 pointr/microgrowery

I'm not that sure where to find guides. There are a lot of premade kits available, check amazon or home depot or similar stores. You can purchase the individual parts or just purchase a kit.

Here is a typical water pump, this one is the smallest and cheapest I can find on Amazon, or close to, as it takes very little flow to supply the drippers. Don't let them run dry though, reservoir should always have water in it.

I currently use this bad boy to split from 1/2 inch hose from a water pump to the thinner spaghetti hose, I think it's 1/4 inch, that leads to the drippers. The trick to using this manifold is finding a fitting to go from 1/2 inch hose from the pump to the required thread for the manifold, which is garden hose size. I use a totally standard 1/2 inch threaded fitting that is stocked at all my local hardware stores. You can adjust flow on the manifold but I prefer not to, just leave it and let the drippers modulate flow.

Instead of a manifold, you could also find some way to go right to spaghetti tubing from the pump, and just run one master line to all the plants, and use a tee for each dripper.

You could also run the 1/2 inch supply line as your master line and puncture a hole in it with this or this and just use a little fitting like this to run the spaghetti hose to each dripper/plant, but I feel like these connections are prone to leaking. It is a very popular way of setting up drip systems though. With less than very many plants I would go with a manifold or spaghetti hose with tees.

I like this style of dripper because it sends a consistent amount of water to the plants and I adjust volume by setting an electronic timer (24 hr/7 day timer) to run the right amount of minutes per day, the amount of times I want. Math is nice.

So basically parts list can fluctuate pretty heavily depending on how you want to do it.

u/LazyGrower · 1 pointr/microgrowery

I got this one: https://www.amazon.ca/dp/B00EWENKXO/ref=pe_386430_126088100_TE_item

I figure between this and the pump it should be enough.

u/Stinky_Fartface · 1 pointr/Homebrewing

I found heating things up can be done relatively cheaply, but cooling down can be more expensive. For heating above ambient I have used an Ice Cube cooler with an aquarium heater. You can get by using the temperature controller on the heater, but eventually you'll want to invest in a proper thermostat like the Inkbird. Put the carboy in the cooler, put in water and set the heater. As long as ambient temperature is lower than your target temperature this will keep it nice and steady. The additional water will be enough thermal mass to prevent any rapid temperature changes. I also eventually bought a cheap aquarium pump to keep the water circulating so there aren't hot spots.

u/ThisAccountIsFishy · 1 pointr/ReefTank

I made one using a tiny pump from amazon. Just spliced it and added the float switch. Ran it for a year with no issues.

VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump For Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord https://www.amazon.com/dp/B00EWENKXO/ref=cm_sw_r_cp_api_M5A1BbD308WAX

u/1-Sisyphe · 1 pointr/DIY

I'd like to put a small pump like this one into a standard small plastic basin like that.
The basin will be filled by rain water.
When there is enough water in the basin, I'd like the pump to start and transfer the water in a tank.
I didn't find so far any cheap way of controlling the pump. And any pump with the sensor included is way too big and too expensive.
Would you have any suggestion?

u/TheYetiCall · 1 pointr/Goldfish

if you're going to do herbs and what not then you're going to want to make a bell siphon. It's flat out black magic lol basically, the water will fill at the same rate but once the water level hits a point, all the water is sucked out. you need that because herbs can't just have their roots sitting in water 24/7 unlike lettuce. I think this is a great starter video for the general idea of how things work. The hard part about tank aquaponics is that you really don't want a lot of weight just sitting right on top of tanks. I've seen a ton of people do it on /r/aquaponics but idk, it seems like a disaster in the making and tends to not look nice (although I'm a hypocrit for saying so lol my set up isn't exactly classy but it was more proof of concept because I wanted to see it working in person). so what I would do if I were you is find a grow box that you want and then build it as a shelf above the tank so you're not applying extra pressure to the class itself. Then you can get yourself a small water pump (this is the one I got. it's about the size of my palm), some hosing and you should be on your way :) sorry I'm not that great at tips or tricks. it depends a lot on where you want things, what you want to spend, ect. Are you planning on fancies or single tails? Typically they recommend slightly over stocked tanks so like I would do 4-5 fancies in a 55gal for a proper aquaponics but a 50gal is a bit small for single tails.

u/thewrittenrift · 1 pointr/Aquariums

Whoops, looks like it was $8, not $6.

VicTsing 80 GPH (300L/H) Submersible Water Pump For Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 4.9ft (1.5m) Power Cord

https://www.amazon.com/dp/B00EWENKXO/ref=cm_sw_r_other_apa_CfhtxbP9RFST9

It is a little workhorse. I've clogged it up twice (once because I didn't think to cover the intake with foam in my pond, the second time because I had moved it to my cat fountain and my kid dumped dog food in the water) and both times I just unplugged it, rinsed it thoroughly under a cold faucet, and it ran fine.