Reddit Reddit reviews VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH

We found 90 Reddit comments about VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH. Here are the top ones, ranked by their Reddit score.

Accessories & Supplies
Speaker Mounts
Electronics
Electronics Mounts
VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH
A pair of side clamping speaker mountsEasy Install, 360 degrees swivels and 10 degrees up or down tilts adjustableClamp adjusts from 5.3 to 11 inchesSupports up to 33 lbs; Cable managementHeavy duty steel construction with wall plate cover. Standard mounting hardware and user manual included
Check price on Amazon

90 Reddit comments about VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH:

u/junsungkun · 15 pointsr/battlestations

They're HS7's! I used these for my wall mount. Very sturdy and work perfectly. Def need studs tho. VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_i_y6M4DbGXM6NX5

u/NinjaNachos · 8 pointsr/DIY

You just need a pair of clamp-on speaker stands like this.

u/JuegaDas · 7 pointsr/battlestations
  1. ssd https://www.amazon.com/gp/product/B00OAJ412U/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
  2. Hard drive https://www.amazon.com/gp/product/B01IEKG2HM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
  3. Graphics card https://www.newegg.com/Product/Product.aspx?Item=N82E16814126109
  4. CPU https://www.amazon.com/Intel-I7-6700-FC-LGA14C-Processor-BX80662I76700/dp/B0136JONG8/ref=sr_1_5?s=pc&ie=UTF8&qid=1525461083&sr=1-5&keywords=i7+6700k&dpID=411v0MvpCaL&preST=_SX300_QL70_&dpSrc=srch
  5. Desk https://www.ikea.com/us/en/catalog/products/S19006323/
  6. Monitor 1 https://www.amazon.com/gp/product/B00VRCLHYS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
  7. Monitor 2 https://www.amazon.com/Acer-R240HY-bidx-23-8-Inch-Widescreen/dp/B0148NNKTC/ref=sr_1_1?s=pc&ie=UTF8&qid=1525460691&sr=1-1&keywords=acer+monitor
  8. Desk mount https://www.amazon.com/gp/product/B01AI2YGK4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
  9. Speakers, they sound fantastic! https://www.amazon.com/gp/product/B01N1ZTJJK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
  10. Speakers mounting brackets https://www.amazon.com/gp/product/B000X9O8SI/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
  11. External audio card for headphones: https://www.amazon.com/gp/product/B00EZT7RE4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
  12. Headphones, If you're into the bass this are the best. https://www.skullcandy.com/shop/headphones/bluetooth-headphones/crusher-wireless
  13. Headphone stand https://www.amazon.com/gp/product/B01MUB8RJ5/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
  14. Phone stand https://www.amazon.com/gp/product/B00QF1KDR8/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
  15. Mic https://www.amazon.com/gp/product/B0170NWLWY/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
  16. mic mount https://www.amazon.com/gp/product/B0170NWLWY/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
  17. Shock mount https://www.amazon.com/gp/product/B01FQB3DD8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
  18. pop filter https://www.amazon.com/gp/product/B008AOH1O6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
  19. Camera https://www.amazon.com/gp/product/B01LXCDPPK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
  20. https://www.amazon.com/gp/product/B01LXCDPPK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
  21. Keyboard https://www.amazon.com/gp/product/B016MAK38U/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
  22. Mouse pad https://www.amazon.com/gp/product/B01FVPPE0E/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
  23. Ps4 stand https://www.amazon.com/gp/product/B015KJAQX6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&th=1
  24. XOne stand https://www.amazon.com/PowerA-Charging-Stand-Xbox-One-Black/dp/B013JLB1IQ/ref=pd_sbs_63_5?_encoding=UTF8&pd_rd_i=B013JLB1IQ&pd_rd_r=BD1B7QRYQ42ESY3F8MS2&pd_rd_w=uGnIp&pd_rd_wg=V2OJ4&refRID=BD1B7QRYQ42ESY3F8MS2&th=1
  25. Plant https://www.ikea.com/us/en/catalog/products/90207685/
  26. Chair https://www.amazon.com/gp/product/B01MQKKS73/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
  27. battle station more angles https://imgur.com/a/Ae2xEKl
u/lucas_talbert · 7 pointsr/battlestations
u/YahBrahCaDaBrah · 6 pointsr/pcmasterrace

Specs

Case: Thermaltake Core P90 Tempered Glass Edition

Motherboard: ASUS ROG Maximus X Formula

CPU: Intel Core i7-8700K

GPU: (x2) Nvidia GeForce GTX 1080 Ti FTW3 (SLI)

RAM: Corsair Vengeance RGB Pro 32GB (4 x 8GB)

HDD: (x2) WD Blue 4TB (RAID 1)

SSD: Samsung 970 EVO M.2 1TB

PSU: EVGA SuperNOVA 1000 P2

Water Reservoir: Thermaltake Pacific 300ml Reservoir

Water Pump: PrimoChill Enhanced D5 Pump

CPU Waterblock: EKWB EK-Velocity RGB

GPU Waterblock: (x2) EKWB EK-FC1080 GTX Ti FTW3 RGB

Radiators: (x4) EK CoolStream XE 120

Fans: (x4) Corsair LL120 RGB Fan

Tubing: Thermaltake Pacific 16mm x 12mm Hard Tubing

Fittings: Bitspower 1/4" Multi-Link, XSPC 1/4" Ball Valves, Thermaltake Pacific 45/90 Adapter Fittings, Kyerivs 90s, EKWB 45s

Desk: IKEA Karlby Walnut 74" (Primary Desk) & 98" cut to 44" (Secondary Desk).

Drawers: (x2) IKEA Alex Gray Drawer Unit

Desk Legs: Etsy SteelImpression 14 ga. Squared Steel Tubes w/ Plastic Bottom Caps (Custom Order: 27 3/4" Tall & 25" Wide) Flat Black Finish

Monitors: (x3) LG 34UC80-B

Speakers: Kanto YU6 Matte Grey

Subwoofer: Kanto SUB8 Matter Grey

Keyboard: Corsair K)95 RGB Platinum

Mouse: Corsair Dark Core RGB SE

Mouse Pad: Corsair MM300 Anti-Fray Extended Mouse Pad

NAS: QNAP TS-451+ 8GB w/(x2) WD Red 8TB (RAID1)

Monitor Mounts: VideoSecure Monitor Mounts

Speaker Mounts: VideoSecure Speaker Mounts

Monitor Power Brick Mounts:(x4)(one for my surge protector mounted behind monitors) HIDEit Power BrickMount

In-Wall Cable Kit: Commercial Electric In-Wall Power Cord & Cable Kit

Ambient Lighting: (x3) Luminoodle Professional Bias Lighting - Large

u/ratbuddy · 6 pointsr/hometheater

I drew on your map for the hell of it :P Probably not necessary to do that to give recommendations, but it was fun. Witness!

C9 is a great TV, call it $2k.

I would get two subs. A pair of VTF-2 is fine, but go VTF-3 if you don't want to wonder if you got enough sub. I marked the corners in the image with 1/2/3/4, I'd first try opposing corners and see how that sounds and/or measures. $1150 shipped for the pair of VTF-2, $1750 shipped for the pair of VTF-3. For $600 more you get a pair of 15" subs and no wondering. I say $1750 on the sub category.

I've drawn your setup from the top, so I'll go ahead and tell you what I drew for speakers - it's probably hard to tell from the black rectangles :)

The fronts are a pair of Paradigm Premier 200B bookshelfs on short stands, so they don't look stupid up on that shelf. You might not even need the stands, if the 24" from the shelf gets the tweeters to your ear level. $1k/pair, 20% off right now so $800.

The matching 600C center channel is a BEAST and is also on sale for $800, front stage total $1600. I just can't say enough good things about this lineup, if you have a dealer nearby, go give them a listen.

The surrounds I've shown on swivel mounts turned inwards to face the seating. You can also aim them a bit out into the room for a less direct sound, but I find with modern receivers and decoders, this isn't necessary. I'd suggest a pair of Paradigm Premier 100B, $640 on sale for these, on a set of the sturdy and affordable VideoSecu side clamping mounts, $25.

Tops, again, Paradigm, this time the P65-R in-ceiling speaker. I'm actually suggesting these based on personal use. They are the flattest, best measuring speakers in my system, and never mind the aimable tweeters - these speakers are designed for good, even dispersion, and it's amazing how well they work. Aimable tweeters are there to make up for dispersion and placement shortcomings, and you will have neither if you go with the P-65Rs. Don't pay retail for these, ask the dealer for at least 20% off since you're buying a full set of speakers. If they say no, find another dealer. It's a poorly kept secret that Paradigm very seldom sells for full MSRP. Call it $500 for the pair.

For the receiver, I know people like to suggest buying a refurb from accessories4less, but I've heard too many horror stories about broken equipment and poor support. I'd suggest the X3500h from Crutchfield, a rock solid company that will have your back if anything is wrong with the gear. The receiver itself has plenty of power for my recommended speakers, and has the best version of Audyssey, XT32 - important to get the most out of your subwoofers in particular. The X2600h you mentioned only has Audyssey XT, which is rather inferior to XT 32. $600.

Totals, then, are:

65" LG C9 TV $2000

Paradigm Premier 200B Front L/R $800

Paradigm Premier 600C Center $800

Paradigm Premier 100B Surrounds $665 with mounts

Paradigm Pro P65-R Tops $500

2x Hsu VTF-3 Mk5 Subs $1750

Denon X3500h Receiver $600

Total before cables $7115

($10 subwoofer cables and any decent copper 14 gauge speaker wire are fine)

Now, all that said, I would strongly consider the 77 inch LG C9. You'd still be just under budget, and sitting as far as you will be, the extra size will really help the system come together. The only question is if you have enough vertical space over the center channel speaker. If you do, grab the 77" and don't look back :)

I also disagree on tops/Atmos not being useful if you only do sports and TV. Asides from native Atmos content, receiver upmixing with the Dolby Surround upmixer is really quite awesome. It adds an immersiveness to the sound that you just can't get with a 2d audio setup.

u/ZeosPantera · 4 pointsr/audiophile

My 2 cents for a $1500 budget Coffee Shop...

  • Simple 4 Channel Pre-amp w/ Phono - $80

  • Apple TV - $100 For your Airplay needs.

  • FM Tuner - $100 (You will need one eventually)

  • AT Turntable - $230 Vintage would also work so look used to save some cash.

  • RCA Distribution Amp - $30

  • Dayton 12 Channel Amp - $500 Expandable later but I assume you will use 8 channels to start.

  • Micca Motion MB42x I recommend four pair (8 speakers) - $320. Even a small coffee shop will be better suited with more, quieter speakers. Demo'd Here

  • Speaker Mounting Brackets - $140 I HIGHLY recommend using the screw holes on the clamps to secure the speakers with small ~1" wood screws. THEN Secure the bracket to the wall with a safety strap. Liability covered.

    I recommend mounting these brackets up-side down so you can aim the speakers down at costumers. (presuming you have high enough ceilings to support it)

    $80+100+100+230+30+500+320+140=$1500 ON THE NOSE!
u/GbMaxSE · 4 pointsr/hometheater

IT's not what I would have purchased for the money, (especially the subwoofer but you'd need two monsters to pressurize THAT room anyway, 20' foot ceilings shiiiiit) but I'm sure you'll love it.

Skipping the reference series was the right choice, in any case. The current Reference line-up of Klipsch is hot trash that's sold at every department store in existence.

As for your mounting problem, 2 pairs of these VideoSecu Clamp mounts will take care of that issue easily for you.

u/crazy_goat · 4 pointsr/hometheater

I have refurbished / reconditioned or otherwise repaired just about every component in my theater. The KEF speakers are all same era and generation, plus or minus a few years.

Front Channels: KEF 103/4 Reference speakers - owner replaced foam surrounds on the internal push/pull woofers - and I refurbished the ferrofluid in the tweeters. $175 off craigslist

Center Channel: NOS (new old stock) KEF Model 100 - found on craigslist. Someone found it in their garage, sitting new in box for 20 years. Refurbished the tweeter (ferrofluid replacement). $60 off craigslist.

Surround Channels: KEF C55 speakers that I found at Goodwill for $20. Complete cleanup - ferrofluid treatment of tweeters. Great condition otherwise.

Rear Channel: KEF Model 90 "center channel" speaker - bought this before I found the Model 100. Roughly the same speaker, but smaller tweeter than the model 100. Tweeter refurbed, cleaned up inside and out. I went with a 6.1 configuration because my room wouldn't benefit much from 7.1 - and the window placement made that difficult. Mixing 7.1 down to 6.1 doesn't change much. $40 off Craigslist.

Subwoofer: PA-120 Premier Acoustics 12'' Subwoofer had this sub for 8 years now, and love it to pieces. Very punchy, very powerful, very affordable. Weighs a metric ton - and customer service was top notch. (Amp malfunctioned after 6 years - got a new one from them free of charge).

Surround AV Receiver: Marantz SR6008 receiver I bought for $200 on ebay because it was 'for parts/not working.' The HDMI1 output (there are two) was burned out. Bought a new HDMI board from Marantz for a hundred bucks and the thing is good as new.

Speaker Mounts: The left C55 surround and rear channel are on custom made speaker mounts - the rear is half custom - mounted to one of the speaker mounts I got from Amazon.

Projection Screen: Custom 105'' Screen Frame and made from a canibalized Da-Lite screen I got for free from work. (was hiding in the plenum when we purchased our office space.

Projector: Benq HT1075 - bought new, because it's already so cost effective. Found it on sale at Frys for $699 a year ago. Very happy with this little projector.

Theater/Home Automation: Home Assistant running on an iPad 3 in the theater room. The iPad was sitting in a drawer, not in use for at least a year, and found an OEM apple dock for $5 on ebay for when it's not in use. I can control my Smart Things devices (z-wave dimmer) - MiLight LED strips behind the screen, in the EXIT light, and the bulbs in the uplight/spotlights in the room, I also integrated Broadlink RM2 support for controlling cheap 433mhz outlet switches for the air purifier, popcorn machine, and whatever else I need to control.

Movie Posters: Marketing department had a bunch of these frames in storage from an old PR campaign. Tore out the foamcore inserts, found high res posters, and ordered them on this silk-like fabric directly from China for $9 a pop. They look incredible up close, almost lithograph-like.

RGB Lighting: Generic RGB Strips I bought for $5 a pop on price mistake with Milight RGB controllers. Milight 9W RGBW bulbs I got for $13 each in $15 brushed steel uplights from Lamps Plus. All controled with the Milight WiFi controller through Home Assistant.

Seating was transitioned from the living room when we bought new sofas - raised the rear seating on 10'' platform. 12GA Speaker wire from my local wire wholesaler (similar price to monoprice). Looking for some carpet options - and have a lead on a local seller of OC703 for acoustic panels.

It's come a long way in a year - here's a before and after - December 2015 and April 2016 -- not the most recent, obviously - but I'm very proud with how it's coming together.

u/red_delicious · 3 pointsr/vinyl

Do your ears a favor and get a couple of speaker stands. If you don't have room for speaker stands on the floor, then at least buy a cheap pair of wall mount stands. These should work.

u/nomnomnompizza · 3 pointsr/hometheater

https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_other_awd_0g0Kwb7K78FTV

If you decide to spread the rears out without a shelf in the future lol

u/umdivx · 3 pointsr/hometheater

If you're opening up your ceiling to run wires and install speakers, depending on how the floor joists are (engineered vs straight up 2 x 8's) you may want to think about blown in insulation to help with noise transfer to the rest of the house.

> but any other suggestions for good looking sound proofing would help.

Check out http://www.soundproofingcompany.com/ they do free reviews/estimates to help give you an idea on what is feasible and what you can do.

As a side note, acoustic panels are less about sound proofing and more about fixing room acoustics (echos, bouncing).

> I do want Dolby Atmos and DTS:X capability but was not sure the best setup, looking at either a 5.1.6 (all 6 ceiling speakers) or possibly doing a 7.1.4 (setting 2 of the 6 ceiling speaker listed as mid-highs possibly?)

Just be aware that 6 channels of atmos is expensive, you're looking at something like the Denon X8500 to do 6 channels of atmos right now. Your 7200 can't do 6 overhead channels, maxes out at 4.

If you're hiring someone, wire for everything (Top fronts, top middles, top rears, front heights and rear heights) once its opened up the cost will be minimal for adding all that.

> Lastly, the rear speakers are limited on placement due to windows, but it appears to have just enough room between the windows and the sliding doors.

Speaker stands, they never hurt anyone and allows you to run rear surrounds.

That or the small section of wall you do have between the patio door and the windows could easily wall mount rear surround speakers.

If this was my room that is probably what I'd do, is wall mount the speakers with Speaker mounts like these on each side of the patio door.

u/brilliantlydull · 3 pointsr/audiophile

Here are some Pyle that look like they would work. You could also just get some clamp style mounts like these

u/HBK42581 · 3 pointsr/vinyl

My wife and I recently moved into our new home and the basement is mine to do with what I please. Naturally, getting my listening station all set up was a priority. It’s not a fancy set up but it looks good and it sounds really good. I’m running a Technics SL-D2, Pioneer CT-M6R cassette player, Onkyo 2 channel receiver, a pair of Chane Audio book shelf speakers, an old Cambridge Soundworks subwoofer that I got when I was in high school back in ‘99 but it adds some really nice beef to the sound. The only thing I might change are the speakers. I may opt out of using those stands as they are not very sturdy on the carpet. I was thinking about getting these:

VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_i_78m0Cb1456B4H

And mounting them to the posts. Anyone have experience with these mounts? Thanks.

u/swatson87 · 3 pointsr/hometheater

Gallery: http://imgur.com/gallery/7N0G8

The end of 2016 brought in some really nice upgrades to my AV setup, including:

TV - Samsung KS8000 65" - Not too much to say about this TV as it's very widely discussed on this subreddit. I scored it with EPP pricing and 10% (doubles to 20%) cash back through discover for around $800 all said and done.

http://www.samsung.com/us/televisions-home-theater/tvs/4k-suhd-tvs/65-class-ks8000-8-series-4k-suhd-tv-2016-model-un65ks8000fxza/

AVR - Yamaha TSR-7810 - This is the Costco version of the Yamaha RX-V781. Purchased new for $464 after a $25 off coupon. Very capable unit for the price.

http://usa.yamaha.com/products/audio-visual/av-receivers-amps/tsr/tsr-7810/

Game Console - Xbox One S - Used for gaming, streaming and as UHD player.

http://www.xbox.com/en-US/xbox-one-s

Front speakers - Axiom M60 V2 - Scored these audiophile grade speakers along with the side surrounds for $400 dollars total on craigslist. Great price for 4 higher end speakers imo.

http://www.axiomaudio.com/m60-floorstanding-speakers

Side Surrounds - Axiom M3ti - Purchased these along with the M60 fronts for $400. A little large for surround speakers, but I figured I may as well use them since I have them.

http://www.axiomaudio.com/m3-bookshelf-speakers

Speaker Stands - Pangea Audio LS300 - I needed 36" speaker stands and these fit the bill. Reasonable stands for the price of $139. I have the columns mass loaded with play sand.

https://www.amazon.com/gp/product/B01EVNE96C/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1

Speaker Mounts - VideoSecu speaker mounts - Some cheap wall mounts, pretty sturdy and have decent positioning capabilities.

https://www.amazon.com/gp/product/B000X9O8SI/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1

Here is the existing gear that I did not upgrade yet but is still being used:

Center Channel - Polk Audio CSi3 - Part of my older entry level stuff. This is the next thing I am looking to upgrade as I'd like to match the center to the fronts. TBH I don't really notice difference in timbre as much as others may.

http://www.crutchfield.com/S-JdQDXbhbK4P/p_107CSI3B/Polk-Audio-CSi3-Black-oak-finish.html

Subwoofer - Velodyne CHT-8 - Go ahead, laugh. Yeah it's only an 8" subwoofer but it does the job for now. Provides pretty good LFE for it's size, just doesn't extend very low. I currently live in a rented townhouse and the wall where the TV is is shared with my neighbor. I'm looking to upgrade to a 12" in the future, either SVS or HSU. But most likely won't happen while I'm living here.

http://www.audioreview.com/cat/speakers/subwoofers/velodyne-acoustics/cht-8/prd_286736_2741crx.aspx

Rear surrounds - Polk Audio M10 - These are pretty cheap speakers, but they could be worse. I don't have any plans on upgrading these unless i find a great deal on something used, or if they break.

https://www.amazon.com/polk-audio-m10-bookshelf-cherry-pair/dp/b002bsha66?tag=indifash06-20

Moving forward and comments:

I would like to get a 2 channel amp to power my front speakers to really wake up their full range. If anyone could recommend a good stereo amp that I could hook up to my pre outs that would be great. I have no experience in external amps and am pretty clueless to it honestly.

I know my cable management is not the greatest ,but unfortunately being a rented house there is not too much I can do.

I do realize that my rear soundstage is a little on the cramped side, the Side surrounds are rather close to the couch and so are the rears. I am lucky enough as it is that I got my GF to agree to moving the couch from the wall in the first place. Honestly, even with it being cramped I get a good effect and immersion, so I'm happy.

Subwoofer placement - This isn't really where I want the sub to go, but I did the crawl and it sounded decent here. Having a neighbor sort of forbids me to place it in the front soundstage.

TV is crooked. I have the TV mounted on the cheapest stand ever from Wal-Mart about 5 years ago. Eventually when I'm a homeowner the TV will get a proper wall mount, but this will do for now.

If anyone has any critiques or comments feel free to give me input. I'm always looking for ways to improve my setup.

u/MMfuryroad · 2 pointsr/hometheater

> CHANE A2.4 can be used as a LCR?(left center right)?

Correct. Their tweeters can be rotated by hand using just a screwdriver as they are in a horizontal alignment from the factory but many rotate them after shipping and use the speakers vertically all the way across or at least for the left and right speaker. Chane owner/speaker designer Jon Lane can walk you through it fairly easily.


>The eventual goal is for a 5.1 setup. should I get 3 CHANE A2.4 then 2 other surrounds and a subwoofer or get 5 CHANE A2.4 then subwoofer?

If your goal is to listen to a lot of multi channel music then having matching Chane bookshelves as side surrounds makes some sense but if not and mostly listening to 2 channel stereo or Direct then matching the surrounds speakers isn't a necessity. The Chane bookshelf A1.4 is a large and fairly heavy bookshelf that usually needs a mount with a metal pad to secure it like from VideoSeCu. Plus yes I recommend a subwoofer. A $400 to $600 subwoofer budget will get you a good quality subwoofer but lesser budgets can be accommodated as well. I have Rythmik subwoofers with my Chane‘s.

>****I know I sound like an idiot.

Anything but !

u/LoveTrumps---Hands · 2 pointsr/hometheater

These are great. I mounted them with 1/4 inch toggle bolts. Holding up my 10lb bookshelf speakers. Overkill for them.

https://www.amazon.com/gp/product/B000X9O8SI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

u/PepeLePeww · 2 pointsr/vinyl

Yeah they will be to the sides of it, mounted on the walls with these: http://www.amazon.com/gp/aw/d/B000X9O8SI/ref=mp_s_a_1_3?qid=1416079254&sr=8-3&pi=AC_SY200_QL40

This was just the first spin making sure everything works and doesn't explode.

u/Halewafa · 2 pointsr/hometheater

I used these to mount my bookshelf speakers. Only had to use 4 tiny screws at the base of each speaker. The mounts are very solid: https://www.amazon.com/gp/product/B000X9O8SI/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

EDIT: Never mind, looks like those only tilt 10 degrees (even though I feel like mine might be slightly more than that, but not 30 degrees)

u/Trv86caprice · 2 pointsr/crtgaming

The speakers are on mounts that attach to the wall. I anchored them to studs in the wall, but that will limit placement in your space. You’d have to get lucky to hit the wall studs right where you have your setup.

I hope this link works.

https://www.amazon.com/gp/aw/d/B000X9O8SI?psc=1&ref=ppx_pop_mob_b_asin_image

u/HellsHumor · 2 pointsr/hometheater

I have a 2 year old running around so I am trying to keep things off the floor. I can't find any sort of a L bracket that would work so I'll keep hunting, I did not think of command strips...

Now that I am googling "Command Strips" Something like THIS with the speakers attatched to [THIS] (http://www.amazon.com/VideoSecu-Clamping-Mounting-Surrounding-MS56B/dp/B000X9O8SI/ref=sr_1_2?ie=UTF8&qid=1375079206&sr=8-2&keywords=Speaker+wall+mount) could work great..

Thanks for the feedback!

u/greencyborgsalmon · 2 pointsr/hometheater

VideoSecu One Pair of Side... https://www.amazon.com/dp/B000X9O8SI?ref=ppx_pop_mob_ap_share

The arms are hollow so I ran the speaker wires through them. I also used some Velcro cable ties as some extra insurance that the speakers won’t fall out. I think the arms are good enough but it made me feel better. I’m pretty happy with them.

u/Armsc · 2 pointsr/hometheater

You can wall mount speakers without much issue. You need to decide if you want to put them directly on the wall (speakers with builtin wall mount) or use third party mounts. You could also do smaller mounts like these if you wanted something smaller. This will also depend a lot on the speaker size you select. Both of the mounts will get the speaker off the wall enough that you won't be loosing the benefit of the port. That being said a front port design would eliminate this too.

So the big question is what is your budget? What other gear do you already have?

u/microjupiter · 2 pointsr/hometheater

[](VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_P4yRAb8M5G3FE)

u/DCbowlofcheerios · 2 pointsr/hometheater

I have two pairs of these. Looks like price went down. I got them for 35 a pair. I mounted using toggle bolts but it also comes with hardware. They tilt and swivel.

VideoSecu One Pair of Side Clamping Speaker Mounting Bracket with Tilt and Swivel for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_dWF8ybSWJ49E4

u/puppetmaster2501 · 2 pointsr/audiophile

I've never tried to wall mount anything before.
http://imgur.com/a/LQ84l
I want to mount legit studio monitors or bookshelves on my wall. No room on desk.
Is it as simple as....
1 - buy https://www.amazon.com/VideoSecu-Clamping-Bookshelf-Surrounding-MS56B/dp/B000X9O8SI It supports 33 lbs.
2 - use stud finder, find stud in wall.
3 - screw mounting things into studs, hope that the studs are actually kinda evenly spaced in a way that lets me put the studio monitors up in reasonable spots
4 - put speakers onto the mounting things that are now screwed into the wall
Should I ask someone for help, will I need power tools? If it's something that is straightforward it shouldn't be hard to figure out. But if it requires 3 sets of arms and power tools then I guess I need help.
All advice appreciated.

u/concentus7 · 2 pointsr/hometheater

I haven't been able to find reliable wall mounts for my SB-22s either. Their cabinet shape makes it difficult. I'm currently using these stands at 32 inches, which seems to be perfect for ear level. However, considering what you're saying about lack of space for stands, this might not be a good solution.

If you think wall mounting might be a better option, I would give these wall mounts a try. It seems several people have used those to mount their SB-22s successfully by clamping front-to-back.

u/homeboi808 · 2 pointsr/hometheater

If you don't want a receiver, you will need powered speakers, such as the Micca PB42X's, just plug it into the headphone jack on the tv (you will need to buy a few feet of speaker wire to connect the two). You can't run a subwoofer, but they should be good enough for a bedroom.

When you saw wall mount, I hope you don't mean just a screw hang, as rear-ported speakers need room away from the wall, especially for bass. You could do something like these, as they give you 6" from the wall.

u/SaperPL · 2 pointsr/battlestations

Something like this: https://www.amazon.com/VideoSecu-Clamping-Mounting-Surrounding-MS56B/dp/B000X9O8SI
Just look up "speaker wall mounts"

u/timladen · 2 pointsr/battlestations

Using these babies. Drill into the wall, mount em, get some wiremold to feed the wires through, and bam.

u/ampedupcivic · 1 pointr/battlestations

Thank you. I used some wall-mounted speaker arms I picked up from Amazon.com. Here is the link. https://www.amazon.com/gp/product/B000X9O8SI/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

u/Saul_Panzer_NY · 1 pointr/BudgetAudiophile

I used these mounts in my home office (which is a bedroom) with a pair of Micca MB42X bookshelf speakers. The room is 14x17. Ceilings are 9 feet. I mounted them with the arm 16 inches below the crown moulding. They mounted with two wall anchors a piece. Took longer to measure and mark the wall than it did to hang them. Less than an hour in total including putting the wired speaker in them.

They hold the speakers with tension so you don’t have to put screws in your nice speakers. You turn a screw on the mount and the sides squeeze the speaker base with rubber lined jaws. That’s nice because you can change your speakers in about five minutes when you want to upgrade. Just need a screwdriver and a chair to stand on.

They have angle adjustment, but not enough for my room. I put a black rubber doorstop under each speaker and it worked fine. Can’t even see them because they match the speaker and mounts.

You can run the wire through the mounts if your wires are in the wall and you want that super clean look. I didn’t do that because we had just painted the room a few months prior and I didn’t want to cut into the sheetrock. I’m going to do that if we decide to stay in this house a few years.

I’m really pleased with them. They look nice. I’ve had lots of compliments on them. They were easy to put up. I have absolutely no room for floor or tower speakers and these worked perfectly. I couldn’t have speakers in this room without them.

https://www.amazon.com/gp/product/B000X9O8SI/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1

u/BartyB · 1 pointr/hometheater

I do not know if this is what you are looking for but I bought these for my Fluance Loudspeakers. I needed them to be able to mount on the wall since my floor space is limited... I have not put them up yet... I am doing that today. Hoping all goes well but the directions are pretty straight forward.

u/numbers123 · 1 pointr/malelivingspace

https://smile.amazon.com/gp/product/B000X9O8SI/

Solid and pretty easy to install

u/GamingApokolips · 1 pointr/ultrawidemasterrace

Well, I'm definitely not an audio engineer, but here's how my desk is set up. Klipsch R-15PM (plus a Klipsch R-10SW under the desk that's not visible) mounted on some clamping wall mounts with a velcro strap added for peace of mind.

https://imgur.com/a/oCXw82u

u/ethanwintersvii · 1 pointr/audiophile
u/Nighthawke78 · 1 pointr/hometheater

I actually misspoke in that message. I’m using 340s across the front with 170s as rears. These are the mounts I used for those.

https://www.amazon.com/gp/aw/d/B000X9O8SI?psc=1&ref=ppx_pop_mob_b_pd_title

u/gozasc · 1 pointr/audiophile

Recently upgraded my Hackintosh build with some better sound equipment. I chose some Definitive Technology Studio Monitor 350's which are hooked up to an old Onkyo TX-SR305 that I had lying around, fed by toslink from my desktop.

I mounted the monitors on the wall with some brackets I purchased off of Amazon-- a pair of VideoSecu MS56B 3LH. For $35 shipped, I have to say these are really great quality. The brackets are beefy and are rated for up to 33 lbs., which far exceeds the 14 lb. weight of each DefTech. The hardware, when tightened down, does not sag.

The studio monitors themselves are also a great value, currently clearanced at $149.99/pair at NewEgg with $2 shipping. I've always liked Definitive Technology as a company, and these bookshelf speakers far exceed anything else I've heard in this price range. Part of this is thanks to the passive radiators they have on their outer sides for bass.

In total, this upgrade was less than $200 and my office is now far more enjoyable to work in. I also use my desktop as a media server to house my music collection. As you can see in the last photo, my library is 342GB (47,918 songs) of V0 MP3s that I have hand-tagged myself.

u/pawsforbear · 1 pointr/hometheater

That's smart. I just asked for an RMA and they refunded me completely. I bought some shelf type mounts for 35 on amazon. I'll let you know how they work.

http://www.amazon.com/gp/aw/d/B000X9O8SI/ref=redir_mdp_mobile?ref_=pe_385040_121528360_TE_dp_1

u/Spaded21 · 1 pointr/hometheater

You could get some speaker mounts like these. I use those with MB42X's and I think they keep the speaker far enough away from the wall. If you are just using them as surrounds then it won't matter too much anyway.

u/scottymoze · 1 pointr/hometheater

These are popular, or something similar: https://www.amazon.com/gp/product/B000X9O8SI

u/TyGamer125 · 1 pointr/hometheater

So you can mix and match speakers as long as your front speakers(left, right, and center) are all the same series. You would have two options for when you sold your house, either remove them and patch the drywall or leave them in. If you aren't planning on staying there long it's probably better to get on wall. For your side speakers you want them between 90-110 degrees from your center position (with 90 being directly beside you). For Atmos you would want to mount them on the wall and angle them to you listening position then rely on your receiver's room correction to fix the delay between one speaker being farther away than the other.

As for sealed vs front ported for front speakers I don't think it matters as much but when you are looking at thinner speakers you'll probably only find sealed. You just don't want speakers with rear ports as you need some space behind the speaker. As for subwoofers sealed subwoofers are tighter (due to air pressure forcing the speaker back to center) but can't play as loud for lower frequencies unlike ported subwoofers that play louder at lower frequencies (due to the speaker not being restricted in motion by air pressure) and also the larger physical volume of the subwoofer the better it will sound. Better explanation here. You buy your subwoofer based on your room not your other speakers. Getting an on wall subwoofer sounds like a bad idea. First off they will be slim which means you'll probably have to pay 2-3x the price to get similar quality and second mounting the subwoofer on the wall is going to transfer physical vibration into your wall.

If it was me I'd say screw paying for significantly more for form factor and find front ported bookshelf speakers (htd level 3, monitor audio bronze 2, ect) that were visually pleasing to the wife, buy mounts like this, mount the front speakers 10-12 feet apart with the tweeter ear level, put the center below the tv either on the top of tv stand or mounted below it, get a nice subwoofer from svs, hsu, rythmic, or monoprice's monolith series, ported is better for movies so that's what I'd get despite them being huge and slap that in a corner or behind the couch which leads me to my next suggestion which is move the couch forward a foot or 2 so you have some space between the couch and the surround speaker or you could just mount them higher and point then down. Due to the fact your not centered in the room I wouldn't do in wall for surround or Atmos and would get something relatively cheap for surrounds as not really that much plays out of them compared to the center and sub during movies (still worth getting tho). Then I'd work on getting your cable management superb as that's going to help you sell it to your wife if you can hide all those cables either in the walls or with cable covers.

u/starkel91 · 1 pointr/hometheater

Elac B6.2 are really nice, they are about 200 used.
I use these to wall mount and like them a lot.

u/JebClemsey · 1 pointr/audioengineering

I was thinking JBL LSR305s with something like this. Unfortunately I don't think softfitting would be very practical for me; I'm just a hobbyist putting together a small recording space in my bedroom.

u/000Destruct0 · 1 pointr/hometheater

They have a keyhole mount on the rear of the speaker if you run the wires in wall. If not then something like this: https://smile.amazon.com/VideoSecu-Clamping-Mounting-Surrounding-MS56B/dp/B000X9O8SI/ref=sr_1_1?ie=UTF8&qid=1482501550&sr=8-1&keywords=wall+mount+for+speakers would be even better as it would allow you to toe the speakers in just a bit.

u/reckesp · 1 pointr/gamecollecting
u/Ninjaba · 1 pointr/AskBattlestations

This speaker mount might work well with it too if you find a way to attach it. The wall attachment part looks possibly removable.

u/Broham13 · 1 pointr/hometheater

Not at all. Lots of people mount them. Not sure what people use, but I found these.

u/PTCancik · 1 pointr/DJs

Just bolt them to the wall. You won’t be disappointed. I just used these mounts to mount my JBL LSR 308s into the perfect listening position.
https://www.amazon.com/VideoSecu-Clamping-Bookshelf-Surrounding-MS56B/dp/B000X9O8SI/ref=sr_1_3?keywords=Studio+monitor+mount&qid=1555976679&s=gateway&sr=8-3

u/1badmf · 1 pointr/hometheater

Thanks everyone. My wife loves the idea of in walls, but you've confirmed my fear about the angled speaker.

After some in depth mockup, a new option is a set of Polk RTi4's and a CS1 center. Currently listed for a good price on craigslist. I'd use some side clamping mounting brackets to mount them to the wall.
Here's the fancy mockup. http://imgur.com/a/eoehU

Here's a link to the fronts:
http://www.amazon.com/Polk-Audio-Performance-Bookshelf-Speakers/dp/B0000E2XEB

And the center:
http://www.amazon.com/gp/aw/d/B0002MPMAE/

And the speaker mount:
http://www.amazon.com/gp/aw/d/B000X9O8SI/

u/PnxNotDed · 1 pointr/hometheater

what are the speaker dimensions? you're definitely limiting yourself by mounting them off axis from their intended design. But, if this might work as a mount.

u/Ehur444444 · 1 pointr/hometheater

Congrats on finding the matching Sony center, I'm sure you'll find a way to make the Miccas work as rears, would something like this work for your setup:

VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_DXAFzbMQCWVCB

It may be you can give the micca enough space on the bookshelf and they'll sound fine.

u/ChanMorgan21 · 1 pointr/hometheater
u/Curbal · 1 pointr/BudgetAudiophile

So... even if the wall mount is someting like this? (https://www.amazon.com/VideoSecu-Clamping-Bookshelf-Surrounding-MS56B/dp/B000X9O8SI/ref=pd_aw_lpo_267_bs_img_2?_encoding=UTF8&psc=1&refRID=0VTCVFPVAA9JAV1NTHAQ)

I will look into waht you said about the isolation pads.

Thanks

u/tad8000 · 1 pointr/hometheater

The mounts I posted before are being used to ceiling mount my Atmos speakers. My surrounds are wall mounted with the link below. Depending on your speakers, they may sound better on speaker stands, but I can say these mounts work very well for bigger speakers. (Sorry for the big links... I'm on mobile)

https://www.amazon.com/VideoSecu-Clamping-Bookshelf-Surrounding-MS56B/dp/B000X9O8SI/ref=mp_s_a_1_3?ie=UTF8&qid=1542297624&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=wall+speaker+mounts&dpPl=1&dpID=41AlGWsm-uL&ref=plSrch

u/_sadboyloko · 1 pointr/AmateurRoomPorn

Look into this.

u/dsmly · 1 pointr/homestudios

I used these for my hs8s in a small room so they would work fine for the 5s VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_DVIZAbCRM6H49

u/brando_1771 · 1 pointr/hometheater

That receiver is a good choice if it meets all your needs. There are certainly better receivers, but those added features don’t matter if you don’t plan to use them.

Bookshelf speakers can be fairly easily mounted. If you’re lucky, the speakers you decide on will have built in wall mounts. This isn’t super common anymore, but there are some. Another option is speaker stands, which are pretty straightforward. Lastly there are lots of speaker wall mounts you can get on amazon. I’ve used these wall mounts for my JBL LSR305 monitors which are pretty heavy and had no issues what so ever. They aren’t the prettiest but they get the job done cheaply.

Your room size is actually very close to mine. I too debated on what size speakers to get. I settled on 5.25” woofer bookshelf speakers and feel these are the smallest I’d go for this room. I think the next size up would be ideal, but if you have a sub you can probably do 5.25” no problem. It seems the Miccas are best served in small applications like offices, bedroom sized room. I can’t speak personally about them, but through my own research this is what I discovered.

u/bad-monkey · 1 pointr/hometheater

> What about on walls that have brick behind them

You can't use those anchors for brick. There are specific anchors that get used for brick and concrete block, but you'll need a hammer drill (slightly more expensive than an average drill) to reliably drill holes into the brick. You might also be able to use a tapcon, which is a specific screw that's made to work with brick/block walls. FWIW, my wall mounted speaker stands (here) came with concrete/brick plastic anchors and hardware.

u/robotdinofight · 1 pointr/hometheater
u/dan1son · 1 pointr/hometheater

I really like these wall mounts. http://www.amazon.com/VideoSecu-Clamping-Mounting-Surrounding-MS56B/dp/B000X9O8SI/ref=sr_1_2?ie=UTF8&qid=1404423005&sr=8-2&keywords=speaker+wall+mounts

I use them for a variety of speakers and only felt the need to screw into the big 6.5" bookshelves that weight 18lbs. For smaller ones the pressure clamp seems to work fine.

u/bambooclad · 1 pointr/audiophile

This is what I would do for some decent background music if it were my joint...

u/jl44882 · 1 pointr/vintageaudio

You might want to get something like this.

From what I found on the internet those speakers are closed and have no port on the back. You should be fine moving them close to a wall.

u/rawautos · 1 pointr/battlestations

So far I really like them. They’re sturdy, and they hold on to the speakers very well. VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_i_cXGzDbM7T2GER

u/adamdevigili · 1 pointr/battlestations

Haha those aren't streaming lights (would be a cool addition on the top of them). They are these speakers on top of these mounts.

u/hlephlephlep · 1 pointr/audiophile

I have two jbl 305s and an lrs310s sub. My computer desk is a bit small and I can't position my 2 display monitors and the 305s on the desk at the same time without the displays blocking the 305s. It's hard living in the first world.
I've considered looking for a new desk or possibly mounting the 305s on the wall and having them point down like this picture shows. Is there any sound quality disadvantage to having the speakers high on the wall tilted down?
I've read that having the rear ports on the 305s too close to the wall can reduce the bass output, but since I also have a sub I assume this wont be a big issue.

Also, can anyone comment on the quality of these two mounts?
Mount 1
Mount 2

u/possiblyaccurate · 1 pointr/hometheater

How about mounting speakers on the wall with wall mounts like this ? These worked well with the WAF here but our space just didn't allow it.

u/picmandan · 1 pointr/BudgetAudiophile

Not sure if you were asking about the TV or speaker.

For the TV, I'm very happy with what monoprice has to offer. Ours is a tilting and swiveling, we've had it for about 5-6 years now. It's great.

For the center channel speaker, a pair of these from amazon might do the trick, (Edit: similar items) or you could try monoprice as well. Only trouble with what I see at monoprice is that all the options appear to require drilling into the back of the speaker, which may be ok for you, it's certainly not that terrible.

With the mount, make sure to give the port in the back a little room to breath. 3" is recommended. But if angled, then, I dunno, the average should be 3"?

u/La_Yerba_Mate · 0 pointsr/vinyl