Reddit reviews VR Face Silicone Cover Mask & Face Pad for Oculus Quest Face Cushion Cover Sweatproof Lightproof

https://smile.amazon.com/gp/product/B07X6DJQS1

$13 at Amazon and a set comes with two masks. They're easy to trade out and add to the comfort of the headset as well.

Bought a quest about a week ago. Had a CV1 before that; my gf and I noticed it was significantly less comfortable. Found a rad headband to 3D print (shoutout to 'thatdude902' on thingiverse!). Between the headband, short 90 degree aux cable, a sweet little cable organizer sticky thing, and a silicone facial interface cover (beat saber & pistol whip sweating) I'd say it's been an amazing improvement to the headset. I've linked all the items in case you're interested.

Silicon cover: https://www.amazon.com/gp/product/B07X6DJQS1/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1

Headband: https://www.thingiverse.com/thing:3664951

Cord organizer: https://www.amazon.com/gp/product/B071FXZBMV/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

90 degree aux: https://www.amazon.com/gp/product/B00SUIKMJ8/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

90 degree USB C: https://www.amazon.com/gp/product/B07JK2PM7B/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

I've tested out several different ones. Honestly, I didn't like any of the silicone covers. Silicone is supposed to be breathable, but these did nothing for stopping sweat from wicking the sweat to the cloth Quest covering, and they feel 'sticky' after just a bit of use if you take them off and put them back on, even with an alcohol wipe-down (the silicone absorbs a bit).


Also, I don't recommend any of the cloth covers. From my tests after a single wash even in cold-water by hand, they end up stretching in all the wrong ways and tough to get aligned right without leaving gaps or interfering with vision.

My favorite has been a leather cover. The AMVR cover comes with a replacement bracket with velcro attached and two different thickness leather covers. It also has notches in the top corners for the glasses arms. It comes with a nose guard that sticks with double-sided tape at the bottom to block out light, but I don't use that. I got mine on Amazon for $30.


If you do really want to go with silicone, the best of the bunch that I've tried was the "VR Face Silicone Cover Mask & Face Pad" from a seller named Devansi on Amazon. I had to trim around the inside a bit so it didn't interfere with vision.


Here are the links to Amazon (Sorry MOD if it's against the rules; let me know and I'll edit them out)


Best leather cover that I tested: https://www.amazon.com/gp/product/B07VT3BM7P

Best silicone cover that I tested: https://www.amazon.com/gp/product/B07X6DJQS1


BTW, the reason why I have tested so many different Quest products (covers, batteries, cords, cases) is to recommend setups for VR training. I wanted to find the best ones that would allow easy wipe-down in-between sharing among different user.

https://www.amazon.com/Silicone-Oculus-Cushion-Sweatproof-Lightproof/dp/B07X6DJQS1/

This is the one I bought, but I think they're all pretty much the same.

https://www.amazon.com/gp/aw/d/B07X6DJQS1?psc=1&ref=ppx_pop_mob_b_asin_title

This is the cover I purchased and rigged onto my glasses interface. I'm not great at Reddit. Stupid question. Is the best way to just upload a pic to another site and then link it here?

i was making a thread about this but i think its being found annoying.


ill just link everything but i think i have it all down and a small explainer


on ali express for 1/2 the price
https://www.amazon.com/Silicone-Oculus-Cushion-Sweatproof-Lightproof/dp/B07X6DJQS1/ref=sr_1_1?keywords=silicone+cover+quest&qid=1572948149&sr=8-1


2/3 the price. ali is their offical store too
https://www.amazon.com/KIWI-design-Knuckle-Controller-Accessories/dp/B07XYYNXJ3/ref=sr_1_3?keywords=kiwi+straps+quest&qid=1572948206&sr=8-3


this came with with the used quest i got.i dig it. i bought a $3 bootleg off this off ali and basically wanted to see how i felt after that. it never came in yet
https://www.studioformcreative.com/product-page/go-quest-deluxe-strap-black


the power bank most are getting. the usbc port draws 3.0amp. the quest itself draws 2.8A so the battery can tread water and deplete itself first before going to quest's reserves. the usb-a port draws 2.4A so uusing that would slowly drain both, i think but extend everything
https://www.amazon.com/Anker-PowerCore-10000mAh-Portable-Delivery/dp/B07PXMF52C/


i did some looking and this just came out and satisfied all my needs. same size as above anker, 3.0A on usbc and 3.0A on its usb-a, so i basically have a choice which port i'd want to use and not be worse off. ive read someone you dont want to quick charge a battery if you can help it. also, i ended up buying some short 1 ft usba to usbc cables off ali and i cant return them so i was like may as well. ravpower is basically brand 2 or 3 compared to anker's 1, so this is fine. power bank is so new reviews are trickling in now
https://www.amazon.com/Portable-Charger-RAVPower-10000mAh-Delivery/dp/B07Y9QYCDC


1ft (30cm) cable came in the mail though and i realized its about 2 inches longer than my head, and i have a big head. but thats not long at all, so im going to do the aesthetic then and go for 10 inch cables, which is 25cm. also getting right angle usb connecter to stress the port less and just make it look cooler


all these took awhile to find but also look cool but also be in 3a, supposedly
connector. these were on amazon same price
https://www.ali
express.com/item/4000205218044.html


12 inch/30cm usba to usbc
https://www.ali
express.com/item/32963375927.html


10 inch/25 cm usb a to usb c
https://www.ali
express.com/item/33048782233.html


12inch /30cm usbc to usbc
https://www.ali
express.com/item/4000086370598.html


10 inch /25 cm usb c to usbc
https://www.ali
express.com/item/4000062318431.html


https://www.ali
express.com/item/4000074041560.html