Reddit Reddit reviews Vycom 906686 Seaboard High Density Polyethylene Sheet, Matte Finish, 1/4" Thick, 12" Length x 36" Width, Black

We found 7 Reddit comments about Vycom 906686 Seaboard High Density Polyethylene Sheet, Matte Finish, 1/4" Thick, 12" Length x 36" Width, Black. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Industrial Materials
Plastic Raw Materials
Plastic Sheets
Vycom 906686 Seaboard High Density Polyethylene Sheet, Matte Finish, 1/4
Excellent scratch resistanceGreat impact and stiffnessWeatherability (UV stabilized)Easy to machine with standard toolingRoHS compliant
Check price on Amazon

7 Reddit comments about Vycom 906686 Seaboard High Density Polyethylene Sheet, Matte Finish, 1/4" Thick, 12" Length x 36" Width, Black:

u/bumholez · 7 pointsr/MouseReview

Buy a large sheet of HDPE plastic and a plastic cutter to hack it into the size you want. I bought this https://www.amazon.com/Vycom-906686-Seaboard-Density-Polyethylene/dp/B00K2QT1XO which works great as a hard mousepad. Cutting it in half (the only way it can fit on my desk, and it is still huge) gives you two sheets. Since the material is the same on both sides you get 4 huge hardpad surfaces to play on for $20.

u/SweatshopTycoon · 3 pointsr/MouseReview

https://www.amazon.com/Seaboard-Density-Polyethylene-Finish-Length/dp/B00K2QT1XO/

High Density Polyethlene sheet. 12"x36"x1/4". It's textured, which lets sensors pick it up.

u/Demroth · 3 pointsr/cade

This is fixable. Get a 1/8" inch thick wood board (like craft plywood). Cut it to the size of the control panel. You may need two side by side, if you cant find a big enough piece. Then use Liquid Nails to adhere it to the top of the control panel (use a cheap paint brush so it's a smooth even coat. Then re-drill the holes.

Or if you can still remove the control panel, you glue it on then trim off the extra with a box knife.

Edit: If the holes are bigger than the the underside of the buttons, use 1/4" inch thick wood board. Do not pin the buttons to only the 1/8" board. If you use 1/4" you can also use seaboard.

u/kaokao1215 · 2 pointsr/MouseReview

I know last time this was mentioned, someone said that you may just have to buy a large sheet of HDPE plastic like this: https://www.amazon.com/gp/product/B00K2QT1XO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

and just cut it to whatever shape you need.

u/BakaBakaBaaaka · 1 pointr/MouseReview

I use this now. I had to sand the edges and stuff, but it is a nice and large hardpad.
Here are some pictures that I took of it a while back.

u/Prolapsed-Urethra · 1 pointr/MousepadReview

You could try an HDPE surface such as this one: https://www.amazon.com/gp/product/B00K2QT1XO/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

If you wipe it off with Lemon Pledge in addition, the glide should be even faster. Not my video, but you can see how well it glides here: https://www.youtube.com/watch?v=dI1O1-CpeBs

The only problem is that these surfaces may cause 3310 sensors to malfunction, so I'd suggest against buying one if you have a mouse that sports one of these.