Reddit reviews WEAVER 1-Inch Steel Lock Mounts for Ruger 10/22
We found 7 Reddit comments about WEAVER 1-Inch Steel Lock Mounts for Ruger 10/22. Here are the top ones, ranked by their Reddit score.
Made of the highest quality materialsHunting Scopes RingsAnother quality Bushnell productSee-Thru Detachable Rings, no base requiredUtilize iron sights or your scope for quick target acquisition with these convenient ringsSteel strap for added strengthThese rings are made to mount to specific firearm receivers to enhance fit and performanceOne inch rings
Everyone else who responded is right. Just wanted to tell you the cheap route I went on the wife's. I do not regret it.
180 + 50 = 230.
It isn't the best setup, but just about everyone on the range will know exactly what you are shooting from rifle to glass since these are the most popular of each out there.
I chose the raised mounts because they still allow me to use the "iron sights" for appleseed events.
I have these Weaver see through and Nikon 3x9 on a couple of 10/22s. Excellent combination. Rock solid. Can still use the open sights.
I have a set of these, a little loctite on the screw's and holds great. Plus can still use the stock irons..... It's a 10/22 so if you put 45° sights on it you will 100% look like a tacti-cool douche.
http://www.amazon.com/gp/aw/d/B000N8JV9A/ref=mp_s_a_1_2?qid=1419902983&sr=8-2&dpPl=1&dpID=41Drun5VoiL&ref=plSrch&pi=AC_SX200_QL40
I got these to try for dirt cheap
Weaver 1-Inch Steel Lock Mounts... https://www.amazon.com/dp/B000N8JV9A?ref=ppx_pop_mob_ap_share
They look good, but haven’t had a chance to shot them yet.
I'm pretty happy with these rings that mount directly to the receiver and have a window to still see iron sights with a mounted scope.
Weaver 1-Inch Steel Lock Mounts for Ruger 10/22 https://www.amazon.com/dp/B000N8JV9A/ref=cm_sw_r_cp_apa_i_umCEDbN5XFVB3
Getting a good cheek weld with a raised scope is difficult though without any riser.
I'm using the NDS-26 in the rear. I also have a Simmons 511039 mounted on it using these: https://www.amazon.com/dp/B000N8JV9A/ref=cm_sw_r_cp_apa_DxzVzbEAHKXA2
I wanted a regular scope for plinking and the Nodak sights for Appleseed. I can post some photos if you're really interested.
If plinking is your major use, consider getting raised rings so you can still use the iron sights. See under the scope.
Also note that the standard recommended 3-9x scopes will add a lot of weight to a very light rifle. Can make long plinking sessions not as much fun. Add a rail and quick detach rings if you want the flexibility to remove it. Bonus with rails is you get lots more options on optics like red dots, etc.
Also, check if your scope is
1/21 inch or 30mm before buying mounts like I just linked.