Reddit Reddit reviews Whirlpool 3048KITRC 30-48KITRC Gas Range Connector Kit, white

We found 1 Reddit comments about Whirlpool 3048KITRC 30-48KITRC Gas Range Connector Kit, white. Here are the top ones, ranked by their Reddit score.

Range Accessories
Range Parts & Accessories
Parts & Accessories
Appliances
Whirlpool 3048KITRC 30-48KITRC Gas Range Connector Kit, white
This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specificationsPackage contains (1) Gas Range Connector KitMulti screwdriver and standard pliers needed for installationThis part is a replacement for the following part numbers: 18001065This product is a universal accessory item compatible with several brands
Check price on Amazon

1 Reddit comment about Whirlpool 3048KITRC 30-48KITRC Gas Range Connector Kit, white:

u/DumpsterDave ยท 1 pointr/Appliances

Are you comfortable with and capable of working with gas lines? If not, call a plumber or the gas company and let them deal with it. Typically, the gas company will be cheaper than a plumber, but not all gas companies will service in home lines/appliances. Some will provide materials, others will require you to do so. At the very least, I would get a quote or two. Sometimes it's cheaper and easier to let someone else take the liability. If you decide to DIY, head to a big box retailer and get one of these or these. You'll need that at a minimum. If you can remove the gas line from the flare fitting attached to the valve, you should be able to re-use it. The flare fittings themselves are fine to re-use, it's the flexible gas line that you don't want to re-use. If you can't or prefer not to re-use the flare fitting, I would also get a new gas valve as well as the threads on the existing one are likely damaged. The pipe should be 1/2" NPT. Make sure you can turn off the gas either at the meter, or somewhere upstream of the stove before you attempt to remove/replace the valve. You will need either some thread sealant or Teflon tape (not both). Only seal the threads on the NPT to NPT connections.