Reddit reviews White Silicone Rubber Tubing, Food Grade
We found 13 Reddit comments about White Silicone Rubber Tubing, Food Grade. Here are the top ones, ranked by their Reddit score.
Flexible tubing for air, water, food, and beverageSilicone rubber for resistance to high temperatures, oils, detergents, ozone, and salt waterTranslucent for visual inspection of fluidsOperating temperature range of -150 to +500 degrees FMeets NSF-51 standards for food equipment material
You can replace your tubing with silicone tubing. I use it in home brewing - it is inert even at high temperatures.
https://www.amazon.com/White-Silicone-Rubber-Tubing-Grade/dp/B003TJ9YQU
I can only see flair in comments as I am on mobile. I was going to say you can pickup a new whip from vapexhal. I found this one on amazon that may also be worth checking out.
https://www.amazon.com/White-Silicone-Rubber-Tubing-Grade/dp/B003TJ9YQU
this should up your game a bit: https://www.amazon.com/White-SiliconeTubing-ID-Wall-Length/dp/B003TJ9YQU/ref=sr_1_13?s=industrial&ie=UTF8&qid=1467824434&sr=1-13
This is safe up to 500 degrees. It'll work perfectly for vaping.
http://www.amazon.com/dp/B003TJ9YQU/ref=biss_dp_sa2
I believe you want to select a 5/16" inner diameter.
I'm pretty sure I got 10 feet from here when I made mine, but searching amazon for "food safe silicone tubing" will give you plenty of options. My "orbiter" was functional and cheap--I had the mason jar lying around already. I've used the tubing for 2 jar-bubblers and some whips now, and it works just fine! I don't have some horrible silicone inhalation disease, at least.
I'd avoid using it until you have silicone. Vinyl isn't rated for that temp. I have the Mash and Boil, only recirculated twice. Otherwise, the beer I produce on it, with a random stir here or there in the mash is perfectly fine. Good prices on tubing can be found on Amazon.
Hey sorry I didn't answer for so long. I got mine here. Internal diameter must be 1/4 inch to accommodate the stem. I went with an overall diameter of 3/8 inch. The skinnier stuff is a little cheaper I think but you don't want it to be too skinny or else it'll fold in on itself.
No problem. These are them. http://www.amazon.com/White-Silicone-Rubber-Tubing-Grade/dp/B003TJ9YQU. The tube really doesn't get hot at all so it's not much to worry about. They are food grade. I get 5/16 inner diameter and 1/2 outer. I was a little off about the price though. It's about $2/ft
the answer is all about the type of tubing and metal. I cant give advice on metals but i did have a very similar problem with my vape getting too hot for its plastic tubing. I fixed it by getting high grade silicon tubing, which you can get on amazon for like $1/ft.
http://www.amazon.com/White-SiliconeTubing-ID-Wall-Length/dp/B003TJ9YQU/ref=sr_1_4?ie=UTF8&qid=1342768208&sr=8-4&keywords=high+temp+silicon+tubing
the general rule of thumb is glass, stone, or wood IMO. (you can also use a hallowed out coconut if you can engineer that, just an idea) or even better, a glass soda bottle (preferably w/o lead)
A quick google: https://www.amazon.com/White-Silicone-Rubber-Tubing-Grade/dp/B003TJ9YQU
I have read somewhere else on this board that, as long as it is food grade, it is safe to use.
You'll have to check yourself if this tube seals with your glass. I don't have a DBV, so I can't check it for you.
http://www.amazon.com/White-SiliconeTubing-ID-Wall-Length/dp/B003TJ9YQU/ref=sr_1_1?ie=UTF8&qid=1395953509&sr=8-1&keywords=silicone+tubing+5%2F16+inner+diameter
This works pretty well.
I usually get 25' of the 1/4" Inside Diameter, and cut to size.
Ninja edit: got my numbers all wrong. This is the one I use. Takes some work to get it on to the glass tube with the ridges, but once it's on there. it'll stay for a while.
Pretty good prices here on Amazon It is slightly thinner than the tubing I got from HBS, but it is still very good. Plenty of sizes, too.