Reddit reviews White SiliconeTubing, 3/8"ID, 1/2"OD, 1/16" Wall, 10' Length

> I sort of envision myself as the caterpillar from Alice in Wonderland when I vape with this and it just doesn't have that reach required. I should get a longer tube.

Do what I did and get a silicone tube, it comes in a 10 ft length and you can cut it to whatever length you like. Silicone also gives less plastic taste than the default vinyl in my opinion.

Honestly, if you get a whip adapter for your bong, you can attach a silicone tube to it and just attach the other end to the QQ. I got mine insanely cheap from dhgate right here, or you can get them off of multiple other websites by searching "whip adapter". A 3/8" inner 1/2" outer diameter tube will work perfect for the whip attachment end(this is the one I bought), but might be a little too big and cover the intake hole of the QQ, I'll check when I get home and update this post.

There's also the option of using a hydrotube on top of the QQ like Matt has done in a video, but you would need a silicone attachment to make it fit right.

Edit: looks like that 3/8” inner diameter tuning is literally the PERFECT SIZE for the mouthpiece, you don't even need to hold it on there, amazing.

Its a ghetto setup :D I use silicone tubing which mounts on to the easy valve and use a 18mm male at the other end. I use a bong without any percolators since I'm afraid that any back pressure on the pump of the Volcano might damage it. I'll try and post a photo of the setup
This is the tubing I use, its the same size as the set on the Plenty
https://www.amazon.com/gp/product/B000FOWGGW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I much prefer white silicone tubing over the stock vinyl-silicone tubes in most vapes. It will get dirtier quicker, can kink, and is more expensive. But its more flexible and more inert (no break in smell+taste and you can soak it in iso to get all of the honey oil off).

This is the Amazon link for the sized used by the DaBuddha

> f-Bomb Micro Bubbler Tube
I've tried both the d020-d and a chinese copy of the f-bomb. Similar to this one: http://www.dhgate.com/store/product/pinnacle-pro-glass-smoking-water-pipe-vaporblunt/184494946.html combined with a 14mm gong adapter.

The pinacle bubbler is nice and portable and does a good job of smoothing out the vapor. However I bought some
Silicone tubing to use as a whip https://www.amazon.com/dp/B000FOWGGW/ref=biss_dp_t_asn and I actually prefer that, less cleaning also and no need to buy a GONG.

The do20-d is way better for home use with the arizer. It has a very simple design that is very functional.

Im using this

I have the EVO too, and I have a whip. Love it!

As a suggestion, the official whip is hella expensive. You can build your own really easily and maybe ch cheaper.

Tubing

https://www.amazon.com/gp/product/B000FOWGGW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Then grab a male and female (probably 18mm, 14 if you need it) from Oregon Glass Blower

http://www.oregonglassblower.com/VAPORIZER-ADAPTERS_c5.htm

Done!

I bought mine and love it.

EDIT: I actually just went and looked at vapeXhales site. Their prices have come down since I looked last time.

The tubes are all silicone. It's rather expensive, but it's rated to 260°C (500°F)

I got this one but for that type of fitting, you'd want 1/2" ID probably (I had to buy larger tubing locally because that particular one was a little too thin).

Eek, those vinyl hoses on the HLT and mash tun!

Edit: This is worth the 16 bucks.

That is a 3/8" ID hose on a 5/16" barb.

Edit: Actually I'm not confident if that is the 5/16" or the 1/4" barb. I swap out the gas and liquid locks all the time and I haven't paid attention to which barb is in there.

I use this https://www.amazon.com/dp/B000FOWGGW?ref=yo_pop_ma_swf

http://www.usplastic.com/catalog/item.aspx?sku=54036&catid=799

---

http://www.amazon.com/White-SiliconeTubing-ID-Wall-Length/dp/B000FOWGGW/ref%3Dsr_1_1?ie=UTF8&qid=1295051729&sr=8-1