Reddit reviews Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle
We found 9 Reddit comments about Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle. Here are the top ones, ranked by their Reddit score.
Material: Soft rubber strip with 3528 SMD LED; Fitting Position: License Plate LightLed light color: Red for brake and stop, Amber for turn signalSize: 20.5*1.3*0.8 cm / 8*0.5*0.3"; Power Cable Length: Approx 60cmVoltage: DC 12V; Waterproof Rate: IP 65; Easy Installation: Mount with 3M tape, 5 wires connectionPerfect turn Signal Brake light and Running tail Light all-in-one for motorcycle, Car, Trailer. Lots of Common uses
The first thing is a Dynojet Power Vision, then pipes and getting rid of the back plate, lights, and turn signals. I’m thinking of covering the ugly intake with stickers for awhile, then a K&N. It seems like it would let more air in than the K&N.
Edit: I’m thinking this will help clean up the back end greatly
Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle https://www.amazon.com/dp/B01GJGCR9U/ref=cm_sw_r_cp_api_KcaWBbNMFS70X
No worries!
License Plate Bracket - https://www.amazon.com/gp/product/B07B482VWN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 mounted on the side by the rear tire
Brake Light - https://www.amazon.com/gp/product/B01GJGCR9U/ref=ox_sc_act_title_1?smid=AMLMN1HNSN4VN&psc=1 - super glued it under the seat where visible
Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle https://www.amazon.com/dp/B01GJGCR9U/ref=cm_sw_r_cp_api_K.j5xbR4YFQ8C
It's a cheap one, so I doubt it'll last but it looks good and works well. I just hooked the ground to a 9volt battery and mapped out the wiring, added bullet connections and hooked it up.
Ordered it like that, just had to wire it in. It's similar to this one
https://www.amazon.com/dp/B01GJGCR9U/ref=cm_sw_r_cp_api_XNYOzbGXT8CTA
Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle https://www.amazon.com/dp/B01GJGCR9U/ref=cm_sw_r_cp_api_ssWBzbZM1208N
Something like this could possibly work. I had a similar setup on a previous bobber.
it's an incredible tail light for $10. Brighter than the original by far. Here's a link: https://www.amazon.com/Wiipro-Universal-Davidson-Flexible-motorcycle/dp/B01GJGCR9U/ref=sr_1_8?ie=UTF8&qid=1499461785&sr=8-8&keywords=brake+light+motorcycle
Can anyone speak to fender eliminator kits such as these?
https://www.amazon.com/Honda-Rebel-integrated-fender-eliminator/dp/B07635YKLN
Also considering just removing the fender and trying to wire a strip like this
https://www.amazon.com/dp/B01GJGCR9U/ref=psdc_8323687011_t2_B07635YKLN
I like the minimalist look but don't want to sacrifice visibility.
Thanks for the help!
I don’t like too many things sticking out of my Spider either..
I’ve been thinking...
Wouldn’t it be nice to have a deck like this one which could blink yellow, independently, on each side (left/right)? This way, we’d be seen from pretty much all angles.
Maybe something like this could be adapted somewhere on the sides of the deck? What do you think? :)
https://www.amazon.com/Wiipro-Universal-Davidson-Flexible-motorcycle/dp/B01GJGCR9U/ref=sr_1_1_sspa?keywords=led+tail+lights+motorcycle&qid=1567195964&s=gateway&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSDZYTVo5MloyU0VUJmVuY3J5cHRlZElkPUEwMTcxMTM2VEpNQTRPUVJTM0xaJmVuY3J5cHRlZEFkSWQ9QTA3MTY5NTkzNzc3SDNWNUFIVVoxJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==