Reddit reviews Yellow Jacket 2883 12/3 Heavy-Duty 15-Amp SJTW Contractor Extension Cord with Lighted Ends, 25-Feet
We found 7 Reddit comments about Yellow Jacket 2883 12/3 Heavy-Duty 15-Amp SJTW Contractor Extension Cord with Lighted Ends, 25-Feet. Here are the top ones, ranked by their Reddit score.
HEAVY DUTY 12 gauge, 3 pronged, 25 ft extension cordPerfect for use with heavy duty equipment and toolsLIGHTED END shows power is on and cord is ready to useDURABLE clear molded plugs are rugged, durable and over-sizedHIGH GLOSS YELLOW jacket resists oil, grease, moisture, and abrasionYellow Jacket cords are more flexible and abrasion resistant at any temperature than standard vinyl compoundsUL AND CUL LISTED
Im pretty sure its one of thoes extension cords with a light on the female end, like this. It looks like someone just stripped the insulation off some romex and stuck it in the end of the cord, instead of putting a male end on it.
smell it
i have this 15 amp 25ft 12 gauge
https://www.amazon.com/gp/aw/d/B000KKLMO8?psc=1&ref=ppx_pop_mob_b_asin_title
Just to emphasize: You really need a heavy duty extension cord to do this safely, preferably with 12 ga conductors. This would work nicely:
http://www.amazon.com/gp/aw/d/B000KKLMO8/ref=mp_s_a_1_1?qid=1420349476&sr=8-1&pi=AC_SX200_QL40&dpPl=1&dpID=41CDHU8QEsL&ref=plSrch
Also, a bit of dielectric grease and electrical tape will really help keep the connection clean.
Here is the desktop version of your link
I'd recommend thicker gauge extension cables to support the 15amp circuit and heavy duty gaffer tape (don't use it on walls) to hold it down. Try to balance laptops and desktops, not just for electrical load balancing, but table space.
https://www.amazon.com/2883-Heavy-Duty-Contractor-Extension-Lighted/dp/B000KKLMO8
https://www.amazon.com/Polyken-Coated-Premium-Gaffers-Length/dp/B00DZ5V2IG/ref=sr_1_16?s=industrial&rps=1&ie=UTF8&qid=1479774940&sr=1-16&refinements=p_85%3A2470955011
http://www.amazon.com/2883-Heavy-Duty-Contractor-Extension-Lighted/dp/B000KKLMO8
With out knowing your exact model to look the motor information up I'm not sure where your 15A draw on the motor is coming from, but if I had to guess its your full load amps, which is above your operational current. Any heavy duty extension cable will be able to handle your staring current which will be ~3x your FLA.
If your FLA is 15A you can use 12A rated cable, sense you can account for the duty cycle of your usage being below the FLA.
Or this https://www.amazon.com/2883-Heavy-Duty-Contractor-Extension-Lighted/dp/B000KKLMO8