Reddit reviews Yesker Outlet Wireless Remote Wall Outlets, 3 Outlets with 1 Remote

Yes.

I have run with multiple computers in a rackmount up through the floor to multiple monitors & a TV for ages, as in since 2004. Currently have it down to one PC and up to 9 monitors and no TV. Never any issues, and the silence is wonderful.

15' video cables are inexpensive at monoprice, DVI, DisplayPort, VGA, whatever you need. Longer are available if needed as well. More so for DVI and HDMI, less so for DisplayPort.

15' USB 2.0 cables work fine as well, plug in a powered hub at your desk. Plug into that your keyboard, mouse, and a USB DAC (USB sound card essentially for good quality sound) $8 cheap to $140/$150 expensive, or use a 15' audio cables as well. Hookup a USB CD/DVD drive as well if you really use it that often, I never do, so a short walk is in order on rare occasion. These are the hubs I'm using currently, they work a treat. They have a built in cable so a USB A/A extension cable is all that's needed which also gives a bit more distance than the extension length you go with.

If you need to hard power cycle the box for some reason take a walk, or hookup a cheap remote AC power outlet switch (used for lamps and such) such as this or this, cost about $15 at home improvement stores, and set the BIOS to always power on after power loss. Kill power with remote, unit goes off, power on with remote, unit boots up fresh.

Any other questions ask or send me a PM.

You could get something like this, open up the remote control and wire it up to your PC on/off switch. Easy as cake.
Edit: if you put your PC to sleep, maybe you could wire up your reset switch to the remote? Or just use the actual remote.. lol

If the bios to your mother board will do wake on power, I would recommend using that to power on your PC. Just get a wireless remote for an outlet so you can turn on the power at a press of a button http://www.amazon.com/dp/B000G80V28 or you can do a wake on keyboard from the ipac. I use this for all my arcade/Mame cabs. Shutdown can be handled from your front end.

The most time consuming part of any Mame build is configuring your front end. You should get that set up before you build anything. This will help you find what works and what your missing in advance.

I have mine on remote outlets (similar to these), nice and quick to turn them on and off, and then I used a simple cable channel to hide the power cable. I would get random shutoffs while playing with bluetooth. Not at first, but after a few months for some reason, it started doing that.

Yeah I have something like that but there are power outlets right by the lights and I want to avoid running extension cords all over the place for just the two plugs that are out of reach.. I'm looking at something more like this but maybe better quality
http://www.amazon.com/DSI-Outlet-Wireless-Remote-Outlets/dp/B000G80V28

Get one of these maybe? You can use the remote for this to hard turn off your wii

https://www.amazon.com/Generic-Outlet-Wireless-Remote-Outlets/dp/B000G80V28

I use mine for a fan and a lamp, and it works okay for me. Keep in mind that if you use it in a noisy place it can turn off/on by accident. I haven't tried using it with my "main" light (e.g. a lightbulb), and I'm not even sure it's possible. So if you're looking to use this to replace a light switch, you could certainly find a better product or solution.
Here's what I found:
Remote activated version:
http://www.amazon.com/gp/aw/d/B000G80V28/ref=redir_mdp_mobile?qid=1254455989&redirect=true&ref_=sr_1_1&s=hi&sr=8-1

This would be better if you wanted more direct control, but it still won't control a light switch. Alas, all my Google Fu has failed me. Sorry I couldn't be more helpful, and good luck