(Part 2) Best automotive exterior accessories according to redditors
We found 5,355 Reddit comments discussing the best automotive exterior accessories. We ranked the 2,868 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
http://smile.amazon.com/Bumper-Dumper-Original-Mountable-Portable/dp/B006IVN03O
Yup.. in NYC a ton of cars have them.. they usually have these up front as well and they look fucking goofy
https://www.amazon.com/BumpShox-XL-Protection-Ultimate-License/dp/B0041LN1L4
I do a lot of surfing and canyoneering; both of which require me to stash my key due to water. I can't lock the key in the car because it won't lock. I've been clipping it to a carabiner on the rear passenger side behind the wheel, but this has downsides (someone seeing me, and I'm always afraid it's still close enough to detect presense and unlock). After burning my hand on the exhaust pipe by not being careful, I decided to find something new.
I found this, but the reviews weren't convincing me of its quality, the drawer looked small, I wasn't sure it would fit the 3rd gen, and it was more than I wanted to spend. I ended up welding this box and pairing it with a combination lock receiver lock. I hope this gives other people ideas if they're in a similar predicament.
this is for Trucks...super sweet if you have a hitch
https://www.amazon.com/gp/aw/d/B001INL9JE/
It's a whistle to scare deer away
I think this one exactly >>> Deer warning
Save-A-Deer
Wildlife Warning Device
deer whistle
Hey guys! Long time lurker, first time poster here. Joined the club a few months back after purchasing my used (CPO) 2015 GTI Autobahn w/ Lighting Package. Like some other users on here, I was not a "car guy" prior to owning this little beast. I came from a 2001 Toyota Solara, so it's been quite the upgrade. All the modifications I found on here or from the various GTI forums out there, so I thought I would try and "give back" to this awesome community. Questions welcomed!
Current list of mods:
Exterior:
Interior:
VAG-COM:
Engine:
Fixes:
For anyone wondering, the material he used called 3M DI-NOC and it's pretty cheap and holds up well from what I've heard.
I see many bumper protectors when I go to NY. http://www.amazon.com/BumpShox-XL-Protection-Ultimate-License/dp/B0041LN1L4/ref=sr_1_1?ie=UTF8&qid=1404749254&sr=8-1&keywords=bumper+shox
I personally would just accept that the car drives the same and NYC is a shitty place to park. I would not want to repaint because it will be bumped again.
Personally prefer the trailer hitch edition. How can you go wrong with one called "The Bumper Dumper"?
I wonder if some deer whistle alerts would keep the dog away.
I nominate /u/Janiichan. She was my very first friend on RAoA, and she is a lovely person! (Also, her birthday is this Sunday.)
You should send her this, because...ZOMBIES!! Also, it's pretty hilarious.
Thank you for the contest!
Just like the bumper dumper!
http://www.amazon.com/dp/B006IVN03O/
http://www.amazon.com/gp/product/B007OXCIB0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Do you have a hitch?
Hitch Safe
I use one of these little guys
HitchSafe HS7000 Key Vault https://www.amazon.com/dp/B000I66JEM/ref=cm_sw_r_cp_api_SluqzbTBPH13A
This kind of thing already exists, and in my opinion is being done better. The “hitch vault” logo is a giveaway. For the model I’m comparing to, the at least have a cover to help conceal the fact that it’s a safe.
HitchSafe HS7000 Key Vault https://www.amazon.com/dp/B000I66JEM/ref=cm_sw_r_cp_api_i_GecdBb3HAHEZH
http://www.amazon.com/Quantum-Mechanix-Engineered-Firefly-Sticker/dp/B004H85K1K
Bumper Dumper
Link to more pics: https://imgur.com/gallery/ze7Wv
Link to Amazon: https://www.amazon.com/dp/B013COCXDC/ref=cm_sw_r_cp_api_yIHJzbJK91SHX
From my understanding Bison, Curt and Arksen are all the same rack with different branding. I found a Arksen on eBay and received a brandless rack.
They were on sale the other day for $9
I used these brackets instead of drilling holes into my bumper.
This is what it should end up looking like.
Hey OP, if you do end up installing a license plate, get an undermount license plate holder. This what I bought for mine. It's basically a giant L-bracket which I attached to the underside of the bumper, where the drill holes are hidden (I drilled just above where your rally lights are).
If you want to shell out the extra $, you can also go for a truly drill-less option.
Then, one day, when the laws are repealed (wishful thinking), you can laugh all the way to the bank...the bank of undrilled bumpers.
That's the best I could do.
Ah, just kidding, this is the best I could do.
I strap my backpack to my rear rack with one of these: http://www.amazon.com/Heavy-Duty-Cargo-Net-Motorcycles-ATVs/dp/B003VLBPJA/ Works perfectly.
Don't get a grill guard if you want actual front end protection.
The first thing to do is get a [deer whistle] (http://www.amazon.com/Living-Products-LLC-0001-Save-A-Deer/dp/B003XNGLJU) - you want to avoid any impact at all costs and prevention measures always outweigh mitigation measures.
If you really want front end protection you want to get a full replacement bumper. A brush guard is just that - it only protects against brush and minor front end scratches - in an actual collision brush guards often increase the amount of damage to the vehicle. There are [multiple outlets and vendors] (http://www.hdtruckware.com/ford-c-1/full-front-replacement-bumpers-c-1_6/) who sell front end protection - and many are pretty pricey.
There are more than a few individuals on /r/trucks that swear by brush guards "I hit a deer at 60 and didn't get a scratch!" - this is bullshit. Even full replacements only mitigate the overall damage done to the front end. I had a '96 F350 in one of the fleets I oversaw with a full replacement bumper - truck hit a deer at 50 and the whole front end was destroyed and the truck totaled out.
If you really want one, head over to your local craigslist and start shopping. I purchased both my front and rear full replacement bumpers (solid pipe ranch hand style) for $400 and got a set of rock bars/steps for $100 - these bumpers can retail for over $1k new. Find a shop to sandblast and paint it and then install it.
Wow, I never thought too much about that but it's definitely a valid concern. Electric cars are just so quiet, it's wild. Now that I'm thinking about it, I know they make these whistles that you can put on your car, when you're driving at a certain speed they make a sound animals like deer can hear.
https://www.amazon.com/gp/aw/d/B003XNGLJU?fp=1&pc_redir=T1
They make a front-end one too, that attaches to your front plate. Though it obviously doesn't protect much againt angled attacks.
Your best bet is to find end spots, or spots where you can park up close to a curb that juts out in front of/behind your car. Usually city designers leave a good 3-4 feet gap between the end of the "parking spot" and where the curb is; dead space essentially. Pull you car up or back into that dead space to give yourself more room away from the other cars.
https://www.amazon.com/dp/B00598U2EM/ref=cm_sw_r_cp_apip_teUDztssf7tpQ?utm_source=share&utm_medium=ios_app
No problem, this is the one I got! I have a lot leftover as well
If they were faster they'd be ahead of you
https://www.amazon.com/Objects-Sticker-package-stickerciti-BERRYZILLA/dp/B00AR9G6XO
This is what I wrote to another user the other day regarding the chrome strips on the early 5th Gen SR5:
I actually just did the full chrome delete this past weekend. I originally only had the emblems.
So there are two schools of thought or process, perhaps three.
One, paint - plasti-dip or paint. Two, Vinyl wrap. Three, overlays.
I went the first route as it was cheaper. I used Rustoleum Peel Coat but there are others. Step 1, clean the surface. Might as well clean the whole car. My neighbor who is a car dude says a nice wipe alcohol after a clay bar will make sure its not only debris free but perfect for the plastic paint to adhere to. Step 2, Tape, tape, tape. Using blue tape you want to cut in under the door handles and where the chrome pieces "hang" over the painted areas. For the large emblem on the trunk I actually taped far away and let the paint overspray and then just rubbed the plastic off up to the emblem. Step 3, after you tape a gorgeous amount, add on plastic or cardboard or whatever barriers to protect from overspray all over your doors and trunk, etc. A quick way for the front is to insert newspaper behind the grill and actually paint the grill black too... it won't hurt it, hell, maybe even give it a boost. Step 4, start nice and slow with a good distance (6-12" freedom units) away with very light coats. I think I ended up with 6 coats on most areas and 8 or 9 on the handles due to the constant handling of myself and my radical children. Make sure to hit it from different angles to get good coverage. Step 5, peel away slowly and if you want to be super careful you can use a small exacto knife to cut under edges but it must be a new blade to actually slice the plastic otherwise it will stretch it, likely peeling it off. I recommend plastic snap off knives because metal can scratch versus plastic which is less likely link here. This is where the distance comes in with the pre-taping and you can just rub it off the paint instead...this video is a good example. Step 6, take pics and show me how it turned out!
Option 2, I suck at Vinyl wrap, I did it on the handles of my Highlander and it was so hard to do that I decided not to do that for the 4runner. If you go this route the get 3M vinyl wrap and watch YouTube for hours.
Option 3, Door Handles and emblems but there isn't much for the chrome stripe on each bumper or even the surround on the fog light.
Hope this helped and I'm sure it will look leagues better after the fake chrome is deleted...!
Cheers.
​
Please note, yes, it does get dirty, it can chip/peel off, reapply is likely, yada yada yada. However, until you decide what you major moves will be, its an afternoon project that provides a big appearance change. So, up to you...
The $39 mud flaps on amazon fit PERFECT on my SR+ :) I would have bought them from Tesla if they had offered them before. https://www.amazon.com/gp/product/B07V36S77Y/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Yeah...clean out everything from it before you go, and leave an itinerary under the driver’s seat.
Side note, if you have a trailer hitch and don’t want to risk losing your keys, there are mini combination safes for leaving your keys with the vehicle that lock into the trailer hitch with a cap to hide the combo lock like this one: HitchSafe HS7000 Key Vault https://www.amazon.com/dp/B000I66JEM/ (~$45)
If you can find a direct fit one that goes into the tow hook, go for that one. My Saabaru has one, I think it's Rho (http://www.rhoplate.com/) or something.. Grimmspeed makes one, too.
If you don't mind drilling into the bumper (after cutting all the plastic out of it to fit the FMIC into mine, I wasn't about to hesitate doing 2 screw holes), you can get the Autozone one.. this seems to be the one I got: http://www.amazon.com/dp/B0013HP98C -- except I paid 10-12 bucks, I think!
I’ve had this decal on my back windshield for almost two years, and it’s shown no sign of peeling, cracking or discoloring whatsoever.
looks like a plate holder to block views from certain angles.
edot:actually i think it is something like this
edit edit: I think this is the exact one.
Amazon! https://www.amazon.com/gp/aw/d/B004H85K1K/ref=sxts_1?ie=UTF8&qid=1522202236&sr=1&pi=AC_SX236_SY340_FMwebp_QL65
Start Here
https://www.amazon.com/Camco-51611-Hitch-Flagpole-Holder/dp/B004IVGA0G
Get one that goes into your hitch. It'll be centered and easily removed.
https://discountflagoutlet.com/index.php/tow-hitch-mount-flagpole-holder.html If you don't want to buy one, you could probably make one pretty easily using an old ball mount.
Here's another one I just found:
http://www.amazon.com/Camco-51611-Hitch-Flagpole-Holder/dp/B004IVGA0G
I like stuff that'll fit into a hitch because its not a permanent modification. I'm not drilling holes in my vehicle. If I don't like the look of something I can simply remove it from the hitch and sell it.
Beautiful work, OP. It seriously looks like a real product.
For hams with a 2" hitch receiver, this works WONDERS as a base. Works great with the SOTA Beams telescoping pole, and I'm pretty sure the Jackite pole would fit as well (2.3" ID).
https://www.amazon.com/dp/B00598U2EM
There are many varieties of carbon fiber vinyl. The one that gets the most attention, and is of the highest quality, is known as Carbon Fiber Di-Noc by 3M. This particular carbon fiber vinyl does have a texture. The texture and overall look is practically identical to that of real carbon fiber.
You can apply it to most wood products (plywood, OSB, MDF, HDF, ect...) however, the vinyl will show all of the lumps and gaps of what you apply it to. Thus, I would make sure you sand and finish your plywood before application.
If you are really worried about how well the vinyl will hold, you can coat what ever you want to wrap in a thin coat of 3M tape primer. This will give you an extremely solid hold, and is intended for high wear, and high usage applications.
Here is a link to where you can get Di-Noc at a good price:
http://www.amazon.com/Black-3M-DI-NOC-Carbon-CA-421/dp/B0062A7M2G/ref=sr_1_3?ie=UTF8&qid=1405249048&sr=8-3&keywords=3m+carbon+fiber+vinyl
Here is a link to where you can get 3M tape primer for a good price:
http://www.amazon.com/3M-Primer-94-Vinyl-Di-Noc/dp/B005LDG7HQ/ref=sr_1_1?ie=UTF8&qid=1405249149&sr=8-1&keywords=3M+tape+primer
I've always thought one of these would be great for vanlife.
https://www.amazon.com/Bumper-Dumper-Original-Mountable-Portable/dp/B006IVN03O
https://www.amazon.com/gp/aw/d/B007GMHTQ8/ref=ya_aw_od_pi?ie=UTF8&psc=1
You need this roof basket in your life.
Didn't use a template, freehand with a scalpel. God luck: https://www.amazon.com/Orion-Black-Carbon-Fiber-Vinyl/dp/B007OXCIB0
http://www.amazon.com/gp/product/B007OXCIB0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I am over by $0.01 so if that is not allowed I replace Doodle Invasion with Unicorns Are Jerks which is $6.99 and this 'Objects In Mirror Are Losing' decal stick which is $1.95 with free shipping.
Thanks. Steel plate is a good idea. I have this roof rack basket: https://smile.amazon.com/ARKSEN-Universal-Extension-Luggage-Carrier/dp/B013COCXDC/ref=sr_1_8?keywords=roof+rack&qid=1554443981&s=gateway&sr=8-8
​
It's not the best but it's pretty solid. I accidentally ran into a concrete ceiling in an underground parking structure due to lower clearance than I thought and the roof rack basket was untouched.
​
But it's got those skinny little bars instead of big fat one. If it was a big bar/pole, I could have used ubolts. With these skinny ones.. maybe I can use a steel plate. I can use two bolts around 2 of the skinny bars and sandwich it with a steel plate from below.
https://www.amazon.com/gp/product/B018FUYN0O/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1 These are what I used to replace the dealer plates. They match the other black plastic bits pretty closely.
I am pretty happy with this combination:
https://www.amazon.com/gp/product/B01EKVUJC8
https://www.amazon.com/gp/product/B018FUYN0O
https://www.amazon.com/gp/product/B000SOM9GQ
It did require some minor mods. I drilled the cover so it takes 4 screws instead of 2, used a dremel to make it so that the screws didn't stick out too far in the rear, and applied some JB weld around the nuts so that they wouldn't spin. A bit of work, but well worth it IMO.
I’m not a huge plasti dip fan, so I went for the covers.
https://youtu.be/aIMaZkEKJxU
https://www.amazon.com/gp/aw/d/B01F42IS20/ref=mp_s_a_1_3?ie=UTF8&qid=1517501678&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=4runner+emblem+black+out+kit&dpPl=1&dpID=51Ra75dUVWL&ref=plSrch#immersive-view_1517501713770
From amazon? https://www.amazon.com/Tesla-Model-Flaps-Splash-Guards/dp/B07V36S77Y/ref=sr_1_93?crid=3O2GE3IVU0CDG&keywords=tesla+model+3+accessories&qid=1564832184&s=gateway&sprefix=Tesla+model+3%2Cautomotive%2C344&sr=8-93
I'm considering 3 of them right now and you can get them from Amazon
Here are the Amazon Canada links (I live in Canada, sorry...)
https://www.amazon.ca/dp/B07TRQ5S91/
https://www.amazon.ca/dp/B07V9CQZW1/
https://www.amazon.ca/dp/B07V36S77Y/
​
For the first one, you can choose the color. The other 2 are black or grey.
You will fall in love with this product. https://www.amazon.com/BASENOR-Tesla-Model-Splash-Guards/dp/B07V36S77Y/ref=sr_1_28?crid=QP9KLB1U196Z&keywords=tesla+model+3+accessories&qid=1574386329&sprefix=tesla%2Caps%2C400&sr=8-28
What you can check the review video.https://www.amazon.com/gp/aw/review/B07V36S77Y/R2K60BQMKGNQPM?ref=pf_vv_at_pdctrvw_srp
I bought these and they work great!
https://www.amazon.com/gp/product/B07V36S77Y/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Or this if you don’t have time to make one.
One security-through-obscurity option if you have a trailer hitch. Also a 4-digit combo, but whatever.
I keep one of these on my car with spare cash and keys. It's handy and secure.
https://www.amazon.com/dp/B000I66JEM/ref=cm_sw_r_awd_JJvRub04VJK5M
Wonderful information.
Do you have any links to the products you mention?
Edit: NVM, found a few.
Window: https://www.amazon.com/KeyGuard-SL-591-Window-Punch-Button/dp/B01FWYKGBQ
Hitch: https://www.amazon.com/HitchSafe-HS7000T-HS7000-Key-Vault/dp/B000I66JEM/ref=sr_1_1?keywords=hitch+lock+box&qid=1554846851&s=automotive&sr=1-1
I used this to get that look.
Personally I don't think I'd like the tow hook being off center, but I saw this Bell drill-less mount this morning and now it's on my Amazon list for when I get my GTI.
Thanks. Here's the link, I bought it on Amazon.
http://www.amazon.com/gp/aw/d/B0013HP98C?cache=2a0a3e869c0994ab91901315e6275a39&pi=AC_SX110_SY165_QL70&qid=1404933896&sr=8-6#ref=mp_s_a_1_6
here is the link. Okay, it's 500 dollars, you have no choice of carrier, the battery can't hold the charge and the reception isn't very…
...SHUT UP AND TAKE MY MONEY!
Planet Express decal!
I was so bored earlier, I picked off all the seeds on a strawberry. Seedless to say, it was berry pointless.
Watchmen
Card protectors
sticker
Thanks for this. Reddit raffle phrase gifting is fun
https://www.amazon.com/Living-Products-LLC-0001-Save-A-Deer/dp/B003XNGLJU
https://www.amazon.com/Living-Products-LLC-0001-Save-A-Deer/dp/B003XNGLJU
Seems to work
O varianta cheap a acestui produs https://www.amazon.com/BumpShox-XL-Protection-Ultimate-License/dp/B0041LN1L4
You best have seen or own Dr. Horrible's Sing-Along Blog or I'm removing your geek cred.
I also think this would look cool on a car, Firefly Emblem.
And I consider my love of Sailor Moon geeky.
Lastly since my username is Zelda related I should include one of the Zelda related items on my list.
They can't take my yarn from me!
I love Firefly so much! I'm actually dressing up as Jayne for a Halloween party tomorrow! :D A lot of these items are ones I have on my own wishlist, but maybe you haven't seen them?! I also searched for more!!
One
Two
Three
Four
Five
Six
Seven
Eight
Nine
Thanks for the contest!!
Oh no! My links are a mess. I tried to fix it but I can't seem to. I apologize. EDIT AGAIN! I fixed it!
Good ol’ Amazon
QMx Engineered by Firefly Bumper Sticker https://www.amazon.com/dp/B004H85K1K/ref=cm_sw_r_cp_api_i_csLXCbVWDFJC4
-http://www.amazon.com/Camco-51611-Hitch-Flagpole-Holder/dp/B004IVGA0G
-http://www.amazon.com/Standard-Hitch-Flag-Holder-Made/dp/B00KXDFGMQ/ref=sr_1_2?s=automotive&ie=UTF8&qid=1404638839&sr=1-2&keywords=flagpole+hitch
One's angled the other's not, i prefer the angled but up to you.
https://www.amazon.com/dp/B004IVGA0G/ref=cm_sw_r_cp_apip_7jAMtCbb1stX6
This might be your best bet. I've had it for a couple on months now and not too bad. Got up go 80 MPH multiple times with no problem. Use a 2" PVC pipe from Home Depot and spray paint it black then get two eyehook screws and call it a day!
I would recommend a flag pole hitch mount like this one: Camco 51611 Hitch Mount Flagpole Holder https://www.amazon.com/dp/B004IVGA0G and then get a flagpole in whatever length you need.
You can use something like this to cover the camera in a black film without painting it. You could paint it but you would have to be meticulous about taping off any of the internal components, as others have indicated. I think the vinyl would be much easier
You could try automotive vinyl. You can get rolls off amazon. 3M makes a matte black one, looks exactly like the top lid on my T450s.
You could also flock it but that's a slightly more permanent solution, and you'd have to make sure that the powder doesn't go where it shouldn't.
it's vinyl wrap. I took the wheels off. cleaned them with soapy water then wiped them down with isopropyl alcohol. I had a left over roll of 5ft by 1ft and it covered 2 wheels (waiting for another 5x1 to do the other side 😂) I just positioned the wrap over the exposed alloy, stuck it, and cut off the excess. it's not a precise cut, maybe 2-3mm over hang. my though was is it would catch less and stay stuck to the wheel more when I'm mildly off roading. 😊
3m 1080 matte black
On mobile. This stuff, cut down, looks very close. You can buy it in smaller sheets though.
http://www.amazon.com/gp/product/B00598U2EM/ref=pd_lpo_sbs_dp_ss_3?pf_rd_p=1944687582&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00AWGNWMK&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1BY9VG1MQS6QZ4WWBVA0
Tardis licence plate cover My favorite desert is German Chocolate Cake it's perfect. Chocolate cake with a caramel, pecan, and coconut frosting! Yummy. cheesecake all day everyday. Happy cake day and thanks for the contest.
cheesecake all day everyday
My favorite dessert is tiramisu. I LOOOOOOOOVE it so much. Its hard to find one thats just the way I like it but its so good and rich and just talking about it is making me want one. dammit and I can't afford one right now :-(.
Edit: Whoops for got my link. This would be perfect on my new car. Thanks for the contest.
it's a license plate frame, but yes.
I made the decision to stop caring what people think of me.
The amount that my life has grown towards the positive because of that simple decision has left me flabbergasted. :)
My other car is a tardis
You certainly need one or two of these for the box!
This little "cooking" set is pretty amusing! There are several other packages just like this but with different foods, they should be listed at the bottom in the things people frequently bought together with this item list. HAPPY BIRTHDAY!! to your friend! Does he like Futurama? This decal is awesome! Orrrrrr, how about this zombie hunting permit sticker?! I hope you find some really cool stuff!
I love the contests here!
3M DI-NOC CA-421 BLACK CARBON... https://www.amazon.com/dp/B0062A7M2G?ref=ppx_pop_mob_ap_share
I used this and loved it. It’s textured and matte. Looks soo good
Carbon fiber wraps? Carbon fiber wraps. Love the look of it, and no more green hands or funky taste. Took me a couple of tries to get a satisfactory application (get your xacto knife out, not scissors) But really happy with the result.
3M Di-Noc CA-421
> you shitbuckets!
Relevant.
a) smarties!!!! we both have them on our lists!!!
now that im looking we have a lot in common on our lists same protein powder, sour patch kids. creatine. and now im going to add the bumper dumper
b) since we have a lot of the same items, im gonna try to pull things off my wishlist that you might like:
You seem to do a lot of outdoors type stuff, how about a waterproof iphone case. a recovery strap incase you ever get suck or need to pull someone out.
You must workout since you have protein powder and the like: i hear this is a great workout book.
and last but not least, a camping cot
The Bumper Dumper
http://www.amazon.com/Bumper-Dumper-The-Original-Mountable/dp/B006IVN03O
They are indeed identical. Josh bought his from Walmart, it is branded as a Reese Carry Power I believe and was about $99. I purchased mine through Amazon for ~$80, this is the link: https://www.amazon.com/Highland-1041900-U-Venture-Rooftop-Basket/dp/B007GMHTQ8
Edit: Walmart version link here http://www.walmart.com/ip/Reese-Carrypower-UVenture-Rooftop-Cargo-Basket/24087297
In case anyone is interested
Highland 1041900 U-Venture Steel Rooftop Cargo Basket https://www.amazon.com/dp/B007GMHTQ8/ref=cm_sw_r_awd_H08Pwb6HE5902
I went for the following combo:
Bars: https://www.amazon.com/gp/product/B01831V6DM
Basket: https://www.amazon.com/gp/product/B007GMHTQ8
EDIT: Here's a pic! http://imgur.com/gallery/12dsi
Fairly cheap, but I'm super happy with it. Got me and my gear from Seattle to Glacier NP and back no problem.
it’s cheap
No prob! Let me know if you need any more help and I'll assist you.
This is the vinyl I got: https://www.amazon.com/gp/product/B007OXCIB0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
This one is the one I bought, I've used it all though, so I'll probably buy some more. Great stuff though.
HIII!!!
I aboslutely NEED this because /u/ldjd and I are going to be painting our faces and going to be hiding out together. We NEED to make sure that our faces are blended PERFECTLY when this happens otherwise we may be found, captured, and consquently imprisoned.
ALSO, if for some reason our camouflage doesn't work out perfectly. /u/ldjd will need this to have on the mirror of our get away car to constantly reassure that we are in fact alive, and WINNING!
On a completely separate note - YAY for random wishlist generator... I summoned someone that I've never talked to!! :D SOOO HIII ldjd.
Cheap easy and should fit mostly any car
Have this one on my 2015: https://www.amazon.com/dp/B013COCXDC/ref=cm_sw_r_cp_awdb_t1_kIgPBbDF4CGGV
It works well and looks great. Word of caution to check cross bar measurements and styles to make sure the rack you get will fit properly.
I may be a bit naive when it comes to roof racks in general since I've never used one, but do you think that 3-4inch I lose with OEM will prevent me from securing a basket like this [one](https://www.amazon.com/ARKSEN-Universal-Extension-Luggage-Carrier/dp/B013COCXDC/ref=sr_1_2?s=automotive&ie=UTF8&qid=1520468142&sr=1-2&keywords=ARKSENCarrier/dp/B013COCXDC/ref=pd_sbs_263_2?_encoding=UTF8&pd_rd_i=B013COCXDC&pd_rd_r=8SNCNP79RGBP0ZWC4E2D&pd_rd_w=Vxz80&pd_rd_wg=frs5b&psc=1&refRID=8SNCNP79RGBP0ZWC4E2Dthat is 39inches wide?)
Thanks! It was about $120 and it was super easy to install yourself! Make sure you buy the crossbars first! Here's a link to the rack:
ARKSEN 64" Universal Black Roof Rack https://www.amazon.com/dp/B013COCXDC?ref=yo_pop_ma_swf
I did a lot of looking before I bought and after what I saw I decided I didn't want to spend a ton because I really don't need rack that can support a roof top tent and I dont want to start hacking factory parts off my new truck. So I found this very inexpensive happy alternative.
Here is the link to Amazon
https://www.amazon.com/gp/aw/d/B013COCXDC/ref=yo_ii_img?ie=UTF8&psc=1
It requires a bit of assembly and I added a few steps to ensure that for the most part its water/rust resistant, adhesive silicone to fill jointed pieces and lock tight for assembly screws. Added some flat black anti rust paint at places where it needed.
The mounting to my 5th gen took a bit of re-engineering. The brackets needed to be inverted to work with the stock cross bars. Once I did that it held very well and I can shake the whole truck by grabbing the rack.
The max weight limit is 250 lbs but I doubt I'll ever need that for my camping gear.
All in all I am very satisfied with my purchase and its 200 less than the cheapest high end one piece universal rack.
This is the rack on amazon. Looks great and is really sturdy
I just got two plain black frames to go with my 2018 Black Edition off of amazon.
https://www.amazon.com/dp/B018FUYN0O?ref=yo_pop_ma_swf
License plate adapter kit (so you can mount your front plate without drilling holes):
https://www.amazon.com/gp/product/B01EKVUJC8/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Plain matte black frames:
https://www.amazon.com/gp/product/B018FUYN0O/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
I can’t take credit, this was all my Fiancé’s work - this truck is his long term project haha. He got an overlay kit on Amazon
This is what I used. Definitely worth the money to not have to worry about taking off the emblems. Very easy to install.
2015 - 2016 SOUTHEAST TOYOTA 4RUNNER BLACK OVERLAY BUNDLE KIT 00016-89016 https://www.amazon.com/dp/B01F42IS20/ref=cm_sw_r_cp_api_i_pWDCDb6T1HZE3
Here you go!
Get a wireless phone charger too. I bought this one rather than the more expensive Tesla one: TapTes Model 3 Wireless Charger Dual Qi Wireless Smartphone Charging Pad M3 Car Interior Center Console Accessories for Any Qi Enable Phone, Compatible with Tesla Model 3 - No Software Issue Upgraded https://www.amazon.com/dp/B07Q9L6DJN/ref=cm_sw_r_cp_tai_71LIDbAK7PK0T
So far so good with it. I just plop my Pixel 3 XL in and it starts charging right away through my case. Much better than trying to plug it in.
Also, after you get your ceramic coat, you may want to consider mud flaps. I bought these but haven’t put them on yet: Tesla Model 3 Mud Flaps Splash Guards(Set of Four) https://www.amazon.com/dp/B07V36S77Y/ref=cm_sw_r_cp_tai_i4LIDbGEBXW58
I plan to put them on this weekend.
I bought the Basenor for $40 bucks (https://smile.amazon.com/gp/product/B07V36S77Y/r ), but if I had to do it again I would buy these A-Premium ones for $20 because they have a longer part that protects more of the bottom of the car (https://smile.amazon.com/dp/B07W6NZ25H/).
I've been toying with the idea of buying different mud flaps that are flat and are less likely to rub on the paint, but they are usually over $100 in price. There are some carbon fiber ones (I hate carbon fiber). Instead, I would get these from a Canadian (site in French-Canadian, use Google Translate to read it) in the Midwest size (3 different sizes) but they cost $150 (https://evmudflaps.com/). You can watch a video on these here https://www.youtube.com/watch?v=JRy1o4Fd2ME
If you have a trailer hitch, just get one of these.
http://www.amazon.com/HitchSafe-HS7000T-HS7000-Key-Vault/dp/B000I66JEM
If you have a trailer hitch, I can't recommend this enough.
Had the same problem. Very disappointed there isn’t a tow hook on my XLE premium. If you have a tow hook I would recommend getting a tow hook plate holder.
After buying several mounts I settled on this mount. Bought a couple wingnuts and washers and it became a no drill front mount.
https://www.amazon.com/Bell-Automotive-22-1-46230-8-Adjustable-Mounting/dp/B0013HP98C
I had gotten one that was adjustable, so I put the holes from underneath. This was the one: https://www.amazon.com/dp/B0013HP98C figured I'd share if you can't find anything else.
Info | Details
----|-------
Amazon Product | Bell Automotive 22-1-46230-8 Adjustable License Plate Frame Mounting Bracket
>Amazon donates 0.5% of the price of your eligible AmazonSmile purchases to the charitable organization of your choice. By using the link above you get to support a chairty and help keep this bot running through affiliate programs all at zero cost to you.
MD requires a front plate n i don't want to drill any holes in the bumper so i got this. sure there are other ones that don't require holes but are all $55+.
thanks, recently put the lip on n i love it. do not love the scrapping though.
[This] ( https://www.amazon.com/dp/B001INL9JE/ref=cm_sw_r_cp_apa_YvpaAbK8BNRJC) is the one I have!
Boom! Roasted
My favorite TV Character is Phillip J. Fry. He's in his 20's, an idiot that you can relate to, and dammit he's in love with Turanga Leela (Did I mention Leela is a cyclops space pilot?). A 20th century guy who stumbled into a cryogenic freezing chamber on New years eve only to wake up on New years day in the year 3000. He is a intergalactic delivery boy for his Great x29 Nephew Hubert J. Farnsworth's company Planet Express. And the best part? His best friend is a Robot and he is his own grandfather (awkward story, involves time traveling and area 51...). Quote: "SHUT UP AND TAKE MY MONEY"
Planet Express Decal
My s/o has this futurama decal on his wishlist!
https://www.amazon.com/gp/aw/d/B001INL9JE/ref=aw_wl_ov_dp_1_4?colid=XQJE0NCI1MRN&coliid=I1LGUXMH9UKVH0
http://www.amazon.com/gp/product/B001INL9JE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
This would help a lotand so would a Milkshake
You'll want to pick up one of these:
http://www.amazon.com/Heavy-Duty-Cargo-Net-Motorcycles-ATVs/dp/B003VLBPJA
I just recently got back from a trip and used one of those to secure most of my stuff. Also, don't underestimate the utility of a fully loaded backpack and some gun locks. Bungee cords help too.
I'll say I loved having one of those little bungee nets to hold my wad of gear together. Not only did I not have to worry about strapping in two directions but I could quickly reach behind me and grab a water bottle or jam it back in there without needing to unpack/repack.
https://www.amazon.com/dp/B003VLBPJA/ref=cm_sw_r_cp_dp_T1_Hk-szb59M9QN0
I too always buy more crap than I can fit in my backpack, and I can't be bothered to mess around with real bike luggage. One of the best $5 investments I've ever made: the bungee net. I keep that shit on me at all times so I never have to worry about making a quick stop on the way home for
beergroceries.Get a bugie net, keep it under your seat or wherever, strap the pizza to your tank. I've transported 4 at once that way. Or a rack.
http://www.amazon.com/gp/aw/d/B003VLBPJA/ref=pd_aw_sbs_sg_1?pi=SL500_SS115
Is this same one? cassavetes' seems to have a much thicker shock cord, has four instead of five grids, and has four thick red plastic hooks instead of the six wire ones on the Topeak.
Both are good, but they don't look the same to me.
Edit:
Linky time!
I can't get a good bead on exactly where that is, but it looks like it could be a deer whistle: https://www.amazon.com/Living-Products-LLC-0001-Save-A-Deer/dp/B003XNGLJU
may not pay for the repairs though and might even kill you if they go through the windshield.
While visiting a friend in Indiana, many people there have a kind of inaudible (for humans) car whistle that is activated with speed and will supposedly scare away deer.
https://www.amazon.com/Living-Products-LLC-0001-Save-A-Deer/dp/B003XNGLJU
They have so many accidents hitting deer it's a serious safety issue. A lot of people I talked to had personal experience with either close calls or outright hitting deer.
i think they invented something to save the deer back in 1902 when these were invented:
https://www.amazon.com/Living-Products-LLC-0001-Save-A-Deer/dp/B003XNGLJU
XD
The technology already exists, it just needs some minor adaptations.
Thought about getting one of these:.
https://www.amazon.com/dp/B0041LN1L4/ref=cm_sw_r_cp_apa_-XXcAb14PC1BD
BumpShox XL - Front Car Bumper Protection, Ultimate Front Bumper Guard. Front Bumper Protection License Plate Frame. Tougher Than Steel ! https://www.amazon.com/dp/B0041LN1L4/ref=cm_sw_r_cp_apa_KKNWAb85CPJGG
Would work on the front for sure if you have to have a front plate. Depending on the car would help on the back as well.
I have this on my front bumper. I refuse to look like a dork with a bumper bully on the back though so I just deal with the scratches there.
You can get it hear.
Thanks for the contest!
Yes, yes, yes, and yes...I don't have anything really important on my list, but this 'Firefly' bumper sticker would be pretty sweet! My car's bumper is currently naked! :P
Ruger!
I have to enter this one.
OKAY SO. My favorite character? Wash. Why? Because out of everyone on the show, he was the most 'normal'. Normal being relative, of course. But while he was a kickass pilot, he had his weaknesses and his faults. He was jealous of Mal's relationship with Zoe, but he obviously adored her. He can pilot a ship with the best of them, but is crap in a physical altercation. He doesn't hide when he's afraid and will be the most vocal about it. He's comforting to those that need it. Basically, he was the heart of Serenity.
Also: this sticker.
I used this from Amazon. Made it really simple. Camco 51611 Hitch Mount Flagpole Holder https://www.amazon.com/dp/B004IVGA0G/ref=cm_sw_r_cp_api_JleIxb0T3VG59
Here you go https://www.amazon.com/dp/B004IVGA0G/ref=cm_sw_r_cp_apa_AHUhAb22Y48TF
I used this flag https://www.amazon.com/dp/B000FA6BLC/ref=cm_sw_r_cp_apa_PIUhAbFC0RBT8
For the actual pole I bought a 4-5 foot fencing pole from Lowe's drilled some holes into it and bolted on some mounting clips for the flag then I spray painted the whole thing black... Oh and at the bottom there's a bolt that they give you to "secure the pole" but it's flimsy so I just went to Lowe's and bought a black hex key bolt and used that to actually secure it. Last thing I needed is the flag flying into the ocean lol
Home made, here’s the link to the flagpole holder:
https://www.amazon.com/dp/B004IVGA0G/ref=cm_sw_r_cp_api_i_9OVhDb4SM16VD
Also need the post, the flag, the cap to the post, and a three o-ring clamps. Two of the o-rings are are for the flag and one I put about midway up so I can lock down the post with ratchet straps to prevent swaying (makes it stable even on the highway)
If you want to buy a flagpole mount, here's a good one on Amazon
Here's a non-ghetto way: http://www.amazon.com/Camco-51611-Hitch-Flagpole-Holder/dp/B004IVGA0G
It's actually really simple! If you get the 3M vinyl wrapping kit it comes with a nice scalpel-like razor blade pen to trim excess. Clean the surface with alcohol, stick it on, press it down, gets the bubbles out, trim, and you're done. It's extremely easy to work with and can be peeled up and stuck back down many times.
Here is the wrap I buy whenever I am wrapping trim. I used plasti-dip for years, but finally started wrapping things instead, and I won't ever go back to plasti-dip.
And thanks!
I had ordered it from an online store called Auto Vinyl Solutions but it looks like they're no longer around. it looks like Amazon sells it though.
Ahh, so you got something like this and just cut it to size and stuck it on there, right?
Most snowboard companies will not do "one-off" custom graphics. You can buy topsheet vinyl skins or buy some 3m auto wrap or paint it though.
Why you should be able to throw matches in the woods, a story:
A young man was hiking one day in a wooded grove. As he was traversing a particularly steep slope he came across a cougar. The cougar came toward him and trapped him against a nearby tree. The men was scared for his life, as he had no weapons to defend himself. He reached into his pockets and found a box of matches. "Are cougars afraid of fire?", he thought. With his life in danger the man struck a match and threw it towards the cat. It hissed; they definitely don't like fire. He struck another and hurled it in the beast's direction, hitting its nose. The cat turned away and ran. Throwing matches in the woods saved this man's life.
Linky?
[EDIT]: Added link
My Other Car is a TARDIS
Because summer means road trips to me, and my car could do with some spicing up, courtesy of the Doctor lol. BINGO!
1.) I enjoy time with my kid, video games, things that smell good, anything Doctor Who and I use to really enjoy painting but have not in a long time.
2.) As I said, anything Doctor Who
3.) I'd like to win because I never win anything 0_o, and because I want to make an elaborate THANKS post.
4.) Moon Knigt
5.) No problem giving out my address:)
Thanks for the contest!
Ah, You and I have similar tastes!
I'm feeling you should get This and I should get This
Then we'd be matching!
Oh, This is funny.. x)
A zombie hunting permit!
Monday
Thanks for the contest!
You can snag one on Amazon. http://www.amazon.com/United-States-Zombie-Hunting-Sticker/dp/B005G3XFW6
Damnit Daryl! Clean yourself up!
I definitely need a Zombie Hunting Permit, that would probably go on /u/TheQueenOfAwesome 's new car hehehehe
Here you go courtesy of /u/hyperoglyphe
http://www.amazon.com/Black-3M-DI-NOC-Carbon-CA-421/dp/B0062A7M2G/ref=sr_1_1?ie=UTF8&qid=1410301913&sr=8-1&keywords=di+noc
here
You can get it on Amazon. The one I used is [this.](http://www.3M.com/ DI-NOC CA-421 BLACK CARBON FIBER 2ft x 1ft (2 sq/ft) Flex Vinyl Wrap https://www.amazon.com/dp/B0062A7M2G/ref=cm_sw_r_cp_apa_vF7gAbTENF5WN)
[is it this one?] (http://www.amazon.com/Black-3M-DI-NOC-Carbon-CA-421/dp/B0062A7M2G/ref=sr_1_1?s=automotive&ie=UTF8&qid=1412450639&sr=1-1&keywords=3M+Di+Noc+carbon+fiber+vinyl+wrap) and can you tell me if THIS is the same? i kinda want to order it from my country instead of paying for us -> europe shipping :)
Wrap: https://www.amazon.com/Black-3M-Carbon-Fiber-CA-421/dp/B0062A7M2G
Adhesion promoter: https://www.amazon.com/3M-Primer-94-Wrapping-Application/dp/B0088P06AS/ref=pd_sim_263_2?_encoding=UTF8&psc=1&refRID=4G41S5GQ7V11HB636HJ6
And it looks like it's pretty cheap too!
I disagree.
Highland 1041900 U-Venture Steel Rooftop Cargo Basket https://www.amazon.com/dp/B007GMHTQ8/ref=cm_sw_r_cp_api_i_LK9iDbFXD4T7H
That link should have the dimensions on it, personally i think it’s the perfect sized as it’s not too big nor too small! Either way good luck on your search!
Thank you! It is the reese roof rack that they sell at walmart, it is the exact same as the highland basket on amazonhttps://www.amazon.com/Highland-1041900-U-Venture-Rooftop-Basket/dp/B007GMHTQ8/ref=sr_1_9?ie=UTF8&qid=1517982561&sr=8-9&keywords=cargo+basket it's just rebranded. I was reluctant to purchase at first but risked it since I could just return it to walmart if I didn't like it but I was really pleasantly surprised for $100 it is everything I need.
I have 3 sets of these Proline gutter mount cross bars and then this roof basket from Amazon. There are a lot of similar options for roof baskets on amazon and there are probably better/cheaper options since I bought that 4 years ago.
Really any brand on amazon with decent ratings is gonna server you well....I have this on my 2015 Legacy https://www.amazon.com/Highland-1041900-U-Venture-Rooftop-Basket/dp/B007GMHTQ8/ref=sr_1_1?ie=UTF8&qid=1492673685&sr=8-1&keywords=highland+rack and its been holding up great. Well water got in the screw holes to rust it, but that could happen with any rack really. Make sure you cover up the screw holes with something! Also make sure the cage you buy isn't too big for the car...I see some giant ass cages on small frame cars and it looks goofy as fuck.
Highland 1041900 U-Venture Steel Rooftop Cargo Basket https://www.amazon.com/dp/B007GMHTQ8/ref=cm_sw_r_other_awd_vQHxwbNBK3WW2
I use this
https://www.amazon.com/gp/product/B007GMHTQ8/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
If you intend on purchasing this make sure you use a liquid silicone on the screws when you put it together to avoid water getting into it and causing rust from the inside. http://www.autozone.com/sealants-glues-adhesives-and-tape/sealant/permatex-3-oz-tube-black-silicone-adhesive-sealant/526731_0_0
I think it does the job.
http://i.imgur.com/q3LorD3.jpg
Some vinyl wrap on Amazon. Here's the link
LZLRUN 3D Carbon Fiber Vinyl Wrap - Outdoor Rated for Automotive Use - 12" x 60" Knife + Hand Tool (Black) https://www.amazon.com/dp/B007OXCIB0/ref=cm_sw_r_cp_apa_i_XXk6CbQ0C4XKT
Here's the stuff I bought originally but it needs to be much wider and at least 7ft long to do the door trim properly
3d Black Carbon Fiber Vinyl Wrap - Outdoor rated for automotive use - 12" x 60 " https://www.amazon.com/dp/B007OXCIB0/ref=cm_sw_r_awd_-i1Pub1QKQTTR
I got sick of dealing with keeping my copper mod clean so I wrapped it with this stuff
Https://www.amazon.com/dp/B007OXCIB0/ref=cm_sw_r_awd_AeJHub1J9PN7V
Came out pretty nice
https://www.dropbox.com/s/p5ckg0dm8cl3ke1/2014-12-17%2016.04.56.jpg?dl=0
Though sanding and a clear coat is a good way to go if you like the copper look.
That sounds like a ton of hassle to verify authenticity. And knowing the capacity matches what it should doesn't necessarily mean it's legit. Would be more reasonable to buy from a trusted seller and learn what to look for to spot fakes. This should help
http://www.sun-vapers.com/how-to-spot-a-fake-sony-vtc5-battery/
No idea on your last question, you'll have to do some research to find what kinda amp limit it has.
This is the one I bought, haven't applied them yet, waiting for new mirrors!
http://www.amazon.com/Objects-Mirror-Losing-Sticker-stickerbomb/dp/B00AR9G6XO/ref=sr_1_fkmr2_1?ie=UTF8&qid=1405121698&sr=8-1-fkmr2&keywords=objects+in+mirror+are+losing+motorcycle
I am looking forward to the Formula 1 Malaysian Grand Prix this weekend! What are you looking forward to this weekend OP?
Item
This car decal would be fun on long drives :P
It's on top of my default list!
Here you go
He has this on his side mirror, which actually comes up as a top result when searching "funny car decal" on Amazon.
Edit: the sushi one is just a few results down.
These stickers for my boyfriend. They're $1.95, free shipping. He has a couple fast cars and used to race so he'd probably get a kick out of these. Thanks for the contest!!
https://www.amazon.com/ARKSEN-Universal-Extension-Luggage-Carrier/dp/B013COCXDC/ref=mp_s_a_1_4?ie=UTF8&qid=1538690597&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=roof+rack&dpPl=1&dpID=51fgyPUDeuL&ref=plSrch
No, unfortunately I went a bit cheaper. It's this one https://www.amazon.com/gp/product/B013COCXDC/ref=ppx_yo_dt_b_asin_title_o01__o00_s00?ie=UTF8&psc=1
I'm running the 4" Rough Country standard travel with 1.5" wheel spacers. I'm going to have a swing down, hitch mounted spare tire carrier welded up which opens up a ton of room for storage where the old spare is. This is the rack that I'm using: https://www.amazon.com/gp/aw/d/B013COCXDC?psc=1&ref=yo_pop_mb_pd_title
For you car? I did a Cargo rack with a waterprooof carrier.
You can do neutral but still have a frame. I think without a frame it looks unfinished and "tacked on" if that makes sense. Just something simple like this.
Ohuhu Matte Aluminum License Plate Frame with Screw Caps (2 Pieces) https://www.amazon.com/dp/B018FUYN0O/ref=cm_sw_r_cp_apip_NAi76jaaJ5bYg
I can upload a picture if you want
I also trimmed them with these https://www.amazon.com/dp/B018FUYN0O/?coliid=I22NOMRJ8BNDOW&colid=YBDWYBWJ6PCM&psc=1&ref_=lv_ov_lig_dp_it
I'm headed that way with my Crosstrek next Tuesday! Love the tires. Something I just replaced (after two years of use because the paint faded a bit) that might look sharp with your black highlights are these License Plate Frames. I always notice people's plates when I'm on road trips. Thank you for removing dealership frames if you had them originally, those irrationally infuriate me.
 
Obligatory not a salesperson, not affiliated in any way, that's just a normal old Amazon link and I'm not making money.
Well if you can find the stock silver ones I can send you the black covers that I bought. I have a Trail so no need for the SR5 ones.
2015 - 2016 SOUTHEAST TOYOTA 4RUNNER BLACK OVERLAY BUNDLE KIT 00016-89016 https://www.amazon.com/dp/B01F42IS20?ref=yo_pop_ma_swf
You can also buy overlays, but I think they look chunky. And if you are going to dip the bumpers, might as well do the emblems while you are at it.
Cardiytools 3D Letters Black TRD ROAD OFF Door Fender Tailgate Emblem Sticker Decal Badge Nameplate for 2010-2019 4Runner https://www.amazon.com/dp/B07RK993YX/ref=cm_sw_r_cp_api_i_PK3RDbPW9D5A2
2015 - 2016 SOUTHEAST TOYOTA 4RUNNER BLACK OVERLAY BUNDLE KIT 00016-89016 https://www.amazon.com/dp/B01F42IS20/ref=cm_sw_r_cp_api_i_5L3RDb23FQT12
Toyota 00016-89707 - 4r Trd Off Rd Ovrlay https://www.amazon.com/dp/B07B3SXLG2/ref=cm_sw_r_cp_api_i_.aj0DbSGVNRM2
2015 - 2016 SOUTHEAST TOYOTA 4RUNNER BLACK OVERLAY BUNDLE KIT 00016-89016 https://www.amazon.com/dp/B01F42IS20/ref=cm_sw_r_cp_api_i_Jbj0DbVXWRW10
Also didn’t use stencils. Look up on YouTube how to do it. Pretty easy!
$85 on Amazon. https://www.amazon.com/gp/aw/d/B01F42IS20?psc=1&ref=yo_pop_mb_pd
I just bought one from Amazon. That looks really cool. https://www.amazon.com/Tesla-Model-Flaps-Splash-Guards/dp/B07V36S77Y/ref=sr_1_15?crid=13MLHAS5R12YK&keywords=tesla+model+3+mud+guards&qid=1564396346&s=gateway&sprefix=model+3+mud+guar%2Caps%2C318&sr=8-15
Do you like it?
Great Protector: The Mud Flaps protect the lower portions of your Model 3 from snow, salt, sand, rocks and other debris your wheels throw around. https://www.amazon.com/Tesla-Model-Flaps-Splash-Guards/dp/B07V36S77Y/ref=sr_1_38?crid=3S89N90SE48S9&keywords=tesla+model+3+accessories&qid=1564543763&s=gateway&sprefix=model+3+acc%2Caps%2C410&sr=8-38
Good call but after doing a lot of research those Quebec one's are way overpriced @ $150 and look terrible compared to the offerings on Amazon.
For example:
https://www.amazon.com/Tesla-Model-Flaps-Splash-Guards/dp/B07V36S77Y
You mean you found this commercially available novelty item that you bought?
Another ME chiming in here.
My prediction on FMA is you're gonna snap that flag pole right where those eyebolts pass through it. No fancy ass metal base would stop that.
I agree, get something proper: http://smile.amazon.com/Camco-51611-Hitch-Flagpole-Holder/dp/B004IVGA0G (plus is someone rear ends you, they can be tried for treason)
You can try buying some black film wrap and wrap it yourself. Shouldn't be too expensive.
https://www.amazon.com/3M-M12-MATTE-BLACK-Vinyl/dp/B00598U2EM/ref=sr_1_4?keywords=3m%2Bcar%2Bwrap%2Bblack&qid=1567324878&s=gateway&sr=8-4&th=1
Carbon fiber vinyl sticker?