(Part 2) Best automotive lights & lighting accessories according to redditors

Total cost: $31.70

Time: ~30 minutes.
Tools required: Hand drill

Now that it gets dark so damn early, I've been using my headlights a lot more, and I noticed that they weren't as bright as they used to be. So, on the advice of a coworker, I picked up THIS headlight restoration kit from amazon, as well as THIS sealer and THIS masking tape (to protect the paint around the lens). The directions were clear and concise and the whole process took about 30 minutes and was extremely easy. It comes with an attachment for your hand drill to which a variety of sanding/buffing discs mount. You start with a coarse grit sandpaper disc to remove the oxidation and then you use progressively finer grit discs to smooth out the surface. Finally you buff and seal the lens.

I couldn't be happier with the results. The lenses look brand new and there are enough sanding discs left over to do at least one or two more cars.

I owned a Crosstrek for a little over theee years. While I had it, it was a pretty great car. I hauled over 20,000lbs. of landscaping stones in that sucker over a 2 month period.

The first big complaint I have about it is that it’s pretty unfriendly to modding. Several of my buddies had other Subaru models and they did nifty things like add cold air intakes and racing tuned computer chips. Sadly, the Crosstrek couldn’t really do any of that so I was stuck with the stock 148 horse power engine. If you’re not really into that scene, it’s a fine car.

The second complaint I have is that the MPG #s they advertise are not accurate. My car was supposed to be 26 city/32 highway. I saw a lifetime average of 23 city/27 highway. Kind of a bummer. You might consider the hybrid if it’s within your budget.

I do have another less important gripe. The CVT automatic transmission robs that car of some power. Even if you get the model with paddle shifters like I did, it just isn’t that responsive. But let’s be realistic... if you’re buying a Crosstrek that you can’t really mod, you’re probably not looking for more power in you mid-high range.

I do have some advice if you do end up going with the Crosstrek (and to be clear, besides those relatively minor gripes, it’s a great car).

1. Buy an LED lightbulb replacement kit for it (feel free to send me a private message and I’ll get you a link to the one I bought on Amazon). The stock bulbs are incandescent lightbulbs and they just aren’t that bright. For like $15, you can make a really noticeable quality of life change to the interior lighting of that car.
   
   
2. Get a K&N permanent air filter (once the stock filter is ready to be replaced). Not only will it pay for itself 4-5 times over the life of the car, it’ll get you a few horse power more and I realized an average of 1.5-2mpg more with that filter in.
   
   Anyhow, I’d be happy to answer any other questions you may have about my experience with that car. It was mostly good and I’d recommend it to someone looking at the crossover size range.
   
   *edit: a number of people have asked for the LED link so I figured it might be easier to post it here:
   
   It’s worth noting though that the kit I bought is no longer available. The one I list below is compatible with my model year of Crosstrek (2015) according to Amazon’s vehicle matching tool. I highly recommend you make use of Amazon’s vehicle matching tool that lets you put details in about your car (make/model/year). It then it tells you if the part you’re looking at is compatible with your chosen vehicle or not.
   
   Anyhow, here’s the link:
   
   https://www.amazon.com/dp/B01DE7UC6C

>Any advice? I love the bulbs but I don’t want to be a complete douche.

Thanks for being considerate. We all thank you.

>These are the ones I got: https://www.amazon.com/dp/B01KYZU604?ref=ppx_pop_mob_ap_share

No offense, but I took a look at these bulbs and they are literally the worst LED bulbs you can get on the market today. The placement and size of the LED chips in no way, shape, or form even approximates that of a halogen bulb's filament. The H11 LED bulb has two LED chips side-by-side, while a H11 halogen bulb has a longitudinal filament (goes up and down, not side-to-side). That's why they're jizzing light all over the place and causing people to flash you; the LED bulb doesn't even resemble the halogen bulb it replaced on a fundamental level.

>I’ve heard you can adjust the angle to make them less blinding but haven’t found any how-to guides.

You can certainly adjust your lamps downward to get rid of glare, but remember: when you adjust your headlamps down, you lose seeing distance. Think of how a cop can shine his flashlight in your face. That's all glare right there. He can certainly adjust his flashlight down and reduce glare for you, but he'd be less able to see further in the distance and less able to see your face. There's a trade-off between glare and seeing distance. Choosing proper halogen bulbs helps you maximize seeing distance while minimizing glare.

>My night time visibility is fantastic.

No offense but that's what you think. The reality is that LED bulbs don't actually improve nighttime visibility. What LEDs do is flood the foreground (10 to 26 feet in front of your vehicle) with light, and this creates the perception that your lights are great. In reality, light 10-26 feet in front of any car is useless unless driving at 5 MPH or below.

https://www.sae.org/publications/technical-papers/content/2019-01-0850/

>Several different LED replacement bulb kits, each designed to replace a conventional 55-W H11 halogen bulb, were purchased and tested in three different low-beam headlight units. [...] These findings suggest that using after-market LEDs to replace halogen bulbs can compromise headlighting performance.

I'll summarize the study if you don't have access: The researchers purchased 9 different LED bulbs from Amazon, and some of them look pretty much identical to the ones you got. They put these 9 different LED bulbs in 3 different headlamps--two reflectors and one projector.

And guess what?

It was a bloodbath.

27/27 LED bulb+headlamp combinations failed a very basic and limited test of glare and seeing distance. 27/27 LED bulbs+headlamp combinations created excessive glare, less seeing distance, or both versus a basic halogen bulb.

----

My best advice to you is to remove the LED bulbs, send them back to Amazon for a full refund, and swap in high-performance halogen bulbs to a) reduce glare and b) increase seeing distance. Do you have sealed beams? You said it was an older truck. If you have sealed beams, then there are plenty of legitimate LED headlamp options out there--none of this Auxbeam crap.

I used the Mothers NuLens kit which has everything you need except for the drill. Comes with the drill chuck attachment, 800/1500/3000 grit sandpaper attachments as well as the polishing ball and the plastic polish. I took my time, and it took about an hour per light. Well worth the $20 and 2 hours of my time, imo!

Used https://www.amazon.com/Meguiars-Two-Step-Headlight-Restoration/dp/B01M75GUJB . Was super easy and there is enough in the kit to do another 2 full cars.

Headlight Polish I have a 2001 E320 and the difference is night and day.

Meguiar's G2970 Meguiar's Two Step Headlight Restoration Kit, 4 fl. oz, 1 Pack https://www.amazon.com/dp/B01M75GUJB/ref=cm_sw_r_cp_api_i_QIXxCb7TR1Q1R

This kit works well. I did two cars with it that were pretty bad.

The rubber dust cover makes it a really tight fit. The heat sink is actually about half way into the rubber and is touching it.

​

I left the lights on for 2 minutes and the heat sink is already hotter than hell itself.

​

Could it start a fire if I'm driving for 1 hour with the headlights on?

​

https://www.amazon.com/BEAMTECH-Headlight-8000Lumens-Extremely-Conversion/dp/B06XHD78DQ

​

Vehicle is 2003 Honda Civic.

Don't buy anything at deautokey. You're going to pay a 4x markup for absolutely no reason. Find the bulbs you need, and look on Amazon. I used these for my car and they had every bulb I needed minus the footwell and trunk ones. https://www.amazon.com/gp/product/B071LHP5WP/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Nether out of the 5 LED headlights I’ve experimented with have an error code. The “BeamTech LED’s” are literally the cheapest durable LED bulbs you can buy which gives a decent beam pattern👇

BEAMTECH H11 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh H8 H9 CSP Chips Conversion Kit https://www.amazon.com/dp/B06XHDYTGL/ref=cm_sw_r_cp_api_fg9VBbZK6ZAG6



The “Hikari LED’s” are premium LED bulbs with a premium price that are bright as hell with a perfect beam pattern👇

HIKARI Ultra LED Headlight Bulbs Conversion Kit -H11 (H8,H9),Philips Lumileds 12000lm 6K Cool White,2 Yr Warranty https://www.amazon.com/dp/B077BT6M6Z/ref=cm_sw_r_cp_api_nm9VBbP60B2VP

I hated how the yellow light from my halogens clashed with the white LED fogs. Decided to try some LEDs I found on Amazon: https://www.amazon.com/dp/B00VNBDWPK/ref=cm_sw_r_cp_api_Cxv.ybHXZNM1P

They work great in the projectors and produce plenty of light on the road compared with the halogens. They also don't seem to have any shadowing issues I've ran into with HID kits in the past.

Have you done the previous maintenance intervals? i.e. fluid flushes (transmission, coolant, brake fluid, spark plugs)? Recommend using DOT 5.1 brake fluid, and long life coolant/trans fluid.

Not sure on the civic, but if it uses a timing chain (which it probably does) it's probably due for an adjustment. If it uses a belt you need to change that ASAP. Honda lists their belt replacement at 7 years or 110k miles, whichever comes first.

Might be a good time to replace the battery before it leaves you stranded.

For other minor things, I would:

• Make sure your air filter and cabin air filter are replaced
  
• Apply 303 UV protectant to all your plastic panels and rubber gaskets (301 aerospace spray)
  
• Spray anti-corrosion spray on your battery terminals
  
• Wash, clay bar, and wax your car with a good sealant
  
• Wet sand and polish your headlights
  
  

Yup.
https://www.amazon.com/dp/B01MS8NK62

https://imgur.com/gallery/XD0m3VK

https://www.amazon.com/gp/product/B06XHD78DQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

SEALIGHT H11/H8/H9 LED Headlight... https://www.amazon.ca/dp/B079KB7QX3?ref=ppx_pop_mob_ap_share

That's my most recommended kit. As long as you take your time and tape all the surrounding paint, you should be fine.

They do make a non-drill based version that will do an OK job. 3m 39084 Headlight Kit

Mothers 07240 California Gold Clay Bar System https://www.amazon.com/dp/B0002U2V1Y/ref=cm_sw_r_cp_api_i_AY3oDb2RBHAN3

Mothers 07251 NuLens Headlight Renewal Kit https://www.amazon.com/dp/B00GZLMEPM/ref=cm_sw_r_cp_api_i_2Y3oDbMHSKTCV

I bought the Mother’s kit and use it once a year. Someone in here said polishing only lasts about 6 months and they are basically right so I do it in late spring generally and it’s good until the end of summer.

The Mothers kit is nice, it has a pad for polishing with a bottle of polish liquid, also some various sanding pads if it’s really bad. I tried doing the sanding one year but honestly just the pad did just as good a job.

Mothers 37251 37251 NuLens Headlight Renewal Kit

Make sure you cover everything around the area because even if you are careful polish will fly off and leave little drips here and there

I sure can! I replaced my map, dome, rear cargo, and parking lights with LEDs on my 2002 Here are the amazon links, but I found some at the local autozone

Map / parking lights : https://www.amazon.com/SYLVANIA-ZEVO-White-Bulb-Contains/dp/B01A77TXNK/ref=au_as_r?_encoding=UTF8&Make=Honda%7C59&Model=CR-V%7C754&Year=2002%7C2002&ie=UTF8&n=15684181&s=automotive&vehicleId=4&vehicleType=automotive

Dome / cargo: https://www.amazon.com/gp/product/B01BDWHXI0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Also, my coworkers have installed these brand LED headlights in their cars and they look great, haven't done mine yet due to the cost : https://www.amazon.com/OPT7-Fluxbeam-Headlight-Clear-Arc-Beam/dp/B00VNBEJ1G/ref=sr_1_3?s=automotive&ie=UTF8&qid=1486063848&sr=1-3&keywords=opt7%2Bled&th=1

Hope that helps, also this page : https://www.osram-americas.com/en-us/applications/automotive-lighting-systems/Pages/lrgmain.aspx

Is what I used to find and check all fitment codes for the LED lights replacements, Happy Lighting!

I purchased these ones after someone else on this sub recommended them. https://www.amazon.com/gp/aw/d/B01B376YOE/ref=mp_s_a_1_1?ie=UTF8&qid=1524147376&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=lx+cree+headlight&psc=1

They do make a huge difference, but I only drove for a few seconds last night to test the alignment (still gotta fix that today.)

I can’t help with headlights info, but I have a 2015 3 and did the LED Interior, reverse, license plate and parking lights upgrade. Really pretty easy and much better light all around. I used these and they all are still working great:

https://www.amazon.com/gp/product/B01AHVND32/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B01DE7UC6C/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00NPIYDWU/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1

I also bought this toolkit for removing interior the light covers and panels:

https://www.amazon.com/gp/product/B01MUC8LTG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

It’s not hard to do and there are very good videos on youtube to guide you, like this one:

https://youtu.be/Hdm9wUFgl18

I am currently looking at these for the turn signals too:

https://www.amazon.com/SiriusLED-resistor-Extremely-Upgrade-Version/dp/B0774HQC8Q/ref=cm_cr_arp_d_product_sims?ie=UTF8#customerReviews


Good luck!

Did you use a sealer?

In my experience, it lasts at least a year.
This sealer made it last an additional year, but it still yellowed again.
https://www.amazon.com/dp/B0051PJWQW/ref=cm_sw_em_r_mt_dp_U_.wCDDb9E95EAM

also you're going to want to get a projector kit as GT172I has said. it gives you that crisp beam of light like you see on brand new/higher end cars. here's just an example, IDK if these fit but its a projector kit that you would put inside your headlight housing http://smile.amazon.com/Nilight%C2%AE-Mini-Bixenon-Projector-Lens/dp/B00B21R0TA/ref=sr_1_1?s=automotive&ie=UTF8&qid=1463609687&sr=1-1&keywords=projector+kit

I ended up buying some new headlights off eBay and they are pretty good quality. I didn't want to ruin my OEM ones just in case I wanted to go back to stock. If you have any questions, let me know! I know the headlights inside and out and I'd be glad to help!

Parts List:

Wiring harness

HID Ballasts and Lights

Projectors

Headlights and Corner Lights

I used a headlight restoration kit from the auto parts store and had pretty good results. It was this one here which had a buffing and wet sanding drill attachments and polishing compound. My headlights weren't bad so i only needed the buffing pad. If you get a kit, make sure it has drill attachments and that the sanding pads are wet sanding (not dry).

Refinish the headlights.

I have tried a bunch of different solutions, the best one is to sand the headlights, from 800 grit > 1600 grit > 2000 grit > 3000 grit, something along those lines. Finish up with a plastic headlight polish like PlastX, then mask the surrounding paint with a cut plastic bag + tape (use painters tape around the headlights during sanding, or even better take them off to sand and paint them), and finish it up by spraying Meguairs Headlight Coat on it, wait 5 minutes, and give it a second coat. Should come out close to perfect, and will last at least a year. Using just PlastX polish will last for maybe a few weeks before fogging again. I tried mixing spar urethane with mineral spirits, 50/50 and that only lasted a few months before fogging up, it dried yellowish as well.

I used this kit for the sanding pads, you can use the powerplastic polish instead of the plastx stuff.

I would heavily recommend a cordless drill for the sanding and polishing

This is the headlight spray

Here are some that I ordered from:

JST Performance - Cobb Accessport, Custom Tune, Turbosmart blow off valve, NGK 1 step colder spark plugs

James Barone Racing - Weighted short shift plate, Aluminum shift cable bracket bushings, Symposer delete, Green Air Filter (because they sell the gray one)

Depo Racing - 3.5" intercooler, catless downpipe, intercooler pipe kit

Boomba Racing - shifter base bushings, short shift lever

Tire Rack, Discount Tire Direct - wheels and tires. Both offer great deals but I go with Tire Rack because they include an amazing road hazard warranty for free with every tire you buy.

Tasca Parts - OEM Ford parts. Some good options: RS airbox lid, RS Shifter, RS engine cover, RS intake pipes

Amazon - ZL1 Rock Guards (tiny but very effective mud flaps), CravenSpeed stubby antenna, 3D (Mugen) style Window rain visors, Philips H11 Xtreme Vision headlight bulbs (same color as stock but 100% brighter), Stainless T-clamps for your intercooler, Motul Multi DCTF transmission fluid, and TONS of Meguiars car care products.

Walmart - best price for Mobil 1 5w-30 full synthetic engine oil, often have coupons for it too.

Here you go OPT7 Fluxbeam H11 LED Headlight Kit w/ Clear Arc-Beam Bulbs - 60w 7,000Lm 6K Cool White CREE - 2 Yr Warranty https://www.amazon.com/dp/B00VNBDWPK/ref=cm_sw_r_cp_api_8i6LAbGAJQ2HZ

Using these in my civic.

A post I can contribute to! I recently bought [these dope headlights] (https://www.amazon.com/gp/product/B00VNBEJ1G/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1) for my 16 year old Passport. The old ones were dim and the new ones are fantastic! A 4 star average and over 3000 reviews. Yes, they are 100 bucks but damn, so worth. Just be sure to find out what bulb type the car needs. Mine was a 9003 aka h4. You can find this by plugging your car's info into autozone.com. Look at a couple youtube videos to find out how to install the bulb: Mine had a rubber 'boot' that sealed the bulb in the housing and a metal clip that holds it in place. A zip tie or 2 to hold the wire and you are all set.

Hey! I'm the owner of the Forester and the bulbs are LED from Opt 7 6000k. I absolutely love them, but are a bit more expensive at $70.
https://www.amazon.com/gp/product/B00VNBEJ1G/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

If you are interested my Instagram is https://www.instagram.com/brianlipke/?hl=en

LX-LIGHT 7'' Round Black Cree LED Headlight High Low Beam for Jeep Wrangler JK TJ LJ CJ Hummber H1 H2 (Pair) https://www.amazon.com/dp/B01B376YOE/ref=cm_sw_r_cp_api_LLy1AbQ1CKTCB

I second this. I ordered these off of amazon last month after someone on this sub recommended them. Easy install. You may want to go ahead and purchase extra tree clips for your grille as they’re easy to break. I got them for <$80 shipped and so far haven’t had any issues / leaks.

LX-LIGHT 7'' Round Black Cree LED Headlight High Low Beam for Jeep Wrangler JK TJ LJ CJ Hummber H1 H2 (Pair) https://www.amazon.com/dp/B01B376YOE/ref=cm_sw_r_cp_api_i_QCaIDb211J367

I got these:

https://www.amazon.com/gp/product/B01B376YOE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

They are knock off's but they use Cree LED's and work pretty well. The two suggestions I will give you is 1. use a ziptie for the connector to secure it better, the lock doesn't really work very well. and 2. use a protective 3m headlight film, as the plastic on the headlight seems prone to scratching.

I haven't had moisture intrusion issues with these and they are very bright. In my book it definitely beats 250 for JWS lights. I can find better things to do with that money.

My trim didn't have fog lights.
I can't remember right now, but I think I was having an issue with finding high beams, or something. I can't seem to find any order history on other bulbs.
But, these are the reverse lights https://www.amazon.com/dp/B008G4Y076/ref=cm_sw_r_cp_apa_i_JiQyDbVFPZQFZ

And these are for you interior lights, and license plate lights https://www.amazon.com/dp/B01DE7UC6C?ref=ppx_pop_mob_ap_share

These work on my 2018 as well so they should still match a 2016.

Sorry, I forgot to link you the little plastic adapters. It's like a little collar it fits into. Super cheap and that's all you need to get an H7 size LED to fit.

https://www.amazon.com/dp/B01J5SCQ1I/ref=cm_sw_r_cp_awdo_t1_dn9ADb88PX35V

This is everything I use. Haven’t had any issues in 2 years so far. For the tag lights, you can just go to an auto parts place and buy their LEDs.

Low Beams:

https://www.amazon.com/gp/aw/d/B01L1NLWEM?psc=1&ref=ppx_pop_mob_b_asin_title

High Beams:

https://www.amazon.com/gp/aw/d/B01KFBPCYC?psc=1&ref=ppx_pop_mob_b_asin_title

Adapter:

https://www.amazon.com/gp/aw/d/B01J5SCQ1I?psc=1&ref=ppx_pop_mob_b_asin_title

Turn Signals:

https://www.amazon.com/gp/aw/d/B01M26IHAR?psc=1&ref=ppx_pop_mob_b_asin_title

Reverse Lights:

https://www.amazon.com/gp/aw/d/B072FHNZKW?psc=1&ref=ppx_pop_mob_b_asin_title

Fog Lights:

https://www.amazon.com/gp/aw/d/B00N5BAWYK?psc=1&ref=ppx_pop_mob_b_asin_title

I went with these LED lamps as a cheap alternative. They're actually very nice, I was pleasantly surprised. Most people think they're high end OEM LED headlights but actually just bulb swaps.

Auxbeam H11 LED Headlight Bulbs F-16 Series Extremely Bright Led Conversion Kit 60W 6000lm SMD LED Chips Fog Light - 2 Year Warranty https://www.amazon.com/dp/B01KYZU604/ref=cm_sw_r_cp_apa_i_-I7lDb617KT4E

Probably the fans built into the back of the bulb assembly. That and the heat sink dissipates heat to ensure a longer bulb life. I have Auxbeam in my '16 and the I get the same buzzing noise. My low beams don't generate the buzzing noise but when my highs are on, they do.

I used this 3M kit to restore them (which I bought when it jumped to $15 for 2 days instead of the average $10 :/) and Meguiar's Keep Clear coating.

If I had to do it again, I'd probably go with this Meguiar's kit that includes the keep clear. I say this because my wireless drill cannot hold a charge and to do both headlights it took me a long time.

LED Headlights-7"/7 inch Round 50W Cree Hi/Lo Beam Motorcycle Driving Light with DRL Turn Signal Halo Ring Angle Eyes for Harley https://www.amazon.com/dp/B01MS8NK62/ref=cm_sw_r_cp_apip_r1qlDimLEGpZI

SKTYANTS 7" 7 Inch headlights Housing bucket for Harley Davidson motorcycle(black) https://www.amazon.com/dp/B073PXW2YC/ref=cm_sw_r_cp_apip_JrNw2Uj7KPHEU

Full disclosure I had my local dealer ship put this on, unfortunately. The wiring requires splitting to mount in the harness (I suppose not difficult to do but it's beyond my time/ability). They charged 3 hours of labor. Had them remove the old blinkers as well. They added on a small resistor to decrease the blink speed. It wasn't a perfect fit but they got it in. So far it works well.

Got them on Amazon for $45, got the Mazda light stalk on Amazon as well for $40. The install was even easier than I thought it would be. Passenger side took a little longer cuz the wiper fluid reservoir is in the way. I put in some yellow LED bulbs for fun.
I know it's been posted a few times already but for anyone like myself new to Mazda:

Stalk:
Mazda Genuine BALN-66-122 Fog Light Switch w/Auto Headlights https://www.amazon.com/dp/B07LCGQGRC/ref=cm_sw_r_cp_apa_i_GMjyCbMKBY53R

Fog lamps:
iJDMTOY Complete Set Fog Lights Foglamp Kit with Halogen Bulbs, Wiring On/Off Switch and Garnish Bezel Covers For 2014-2016 Mazda 6 (Excluding Mazda6 Grand Touring Trim) https://www.amazon.com/dp/B018GXA8CM/ref=cm_sw_r_cp_apa_i_kPjyCbXDHWFCB

H11 Yellow LED:
Alla Lighting Super Bright H11 LED Fog Lights 2000 Lumens High Power 3030-SMD LED H11 3000K Yellow H11LL H8LL H8 H16 H11 LED Bulb H11 Yellow Fog Lights Lamp Bulbs Replacement w/Projector (Set of 2) https://www.amazon.com/dp/B01N67FMQ5/ref=cm_sw_r_cp_apa_i_WPjyCb7S2DAHS

Love these in my 2011+

BEAMTECH H4 LED Headlight Bulb,... https://www.amazon.com/dp/B06XHD78DQ?ref=ppx_pop_mob_ap_share

I bought some LED lights from amazon that are really bright. Here is a link to what I bought: https://www.amazon.com/gp/product/B07RYPNW4G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B071LHP5WP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

I've not gotten any compliments or honked horns at me... so I'm not sure if they are blinding..

Turn signal lights

Alla Lighting Brightest CANBUS... https://www.amazon.com/dp/B07GVT4F2C?ref=ppx_pop_mob_ap_share

Reverse lights

AUXITO 912 921 LED Backup Light... https://www.amazon.com/dp/B0728DYR9H?ref=ppx_pop_mob_ap_share

Inside lights

SEALIGHT 194 LED Bulb Error Free,... https://www.amazon.com/dp/B07G4VJP5N?ref=ppx_pop_mob_ap_share
And
NAKOBO 2835 Chipsets （More... https://www.amazon.com/dp/B07K7F2169?ref=ppx_pop_mob_ap_share

Hope that helps!

This is what I used for the Headlight and the Fog lights
https://www.amazon.com/dp/B079KB7QX3/ref=cm_sw_r_cp_apa_i_-XedBbXVT6FRC

Jesus, you went balls out. I was just going to use something like this: https://www.amazon.com/Blue-Magic-730-6-Headlight-Sealer/dp/B0051PJWQW

At this point i fucked up one of my headlights and like melted it sanding it with a disc that came in a restore kit. I donno wtf happened, but there are like burn marks in the drivers side. So it needs replaced anyways.

http://www.amazon.com/Blue-Magic-730-6-Headlight-Sealer/dp/B0051PJWQW

First, you’re going to need a drill with a chuck instead of a 1/4” bit holder. This is a good start:

https://www.amazon.com/dp/B001AIZ5HY/

If you don’t have a good drill, there’s this one but you’re in for some elbow grease:

https://www.amazon.com/dp/B006VB8JTQ/

I don't know how much clearance you're going to have but if you can find a sealed beam conversion headlamp, you might be able to retrofit a projector like this, Nilight 2.5" Mini HID Bixenon Projector Lens for H1 Bulb Car Gift:chrome Shround https://www.amazon.com/dp/B00B21R0TA/ref=cm_sw_r_cp_api_qQ5MybAAYM97K and install an H1 LED bulb.

This projector will give you a cutoff beam and even has a high beam solenoid inside to flip the cutoff plate away.

The back end might get too deep to fit between your triple and gauge cluster but it's the cheapest thing I can think of. It might be a challenge finding a chrome cover for the back.

Awesome, thanks for the heads up. Here's the projector housings, hid kit, and headlight housings. I had to cut holes in the back of the headlights and jb weld the projectors in, but it was all pretty simple. Also had to use a step drill to cut holes behind the headlights on the Jeep to clear the backs of the lamps.

I used Mothers NuLens to restore and remove oxidation and then finished with Meguiars Headlight Coating to prevent more oxidation. Only time will tell how well the coating worked but the headlight restore process was no big deal if I have to do it again in a year or so.

https://www.amazon.com/Philips-X-tremeVision-Upgrade-Bulb-Pack/dp/B00U1OIESK/ref=sr_1_3?ie=UTF8&qid=1524599153&sr=8-3&keywords=philips+xtreme+vision+h11

Amazon is loaded with them; for example - these are $90 - https://www.amazon.com/dp/B01B376YOE/ref=psdc_318323011_t2_B07HPGMZ6N and I have seen lights as lows as $60 and much much higher. Just make sure they either have an anti flicker built in or if you need to order them separately. Either way nice jeep!

LX-LIGHT 7'' Round Black Cree LED Headlight

You get what you pay for with led bulbs. $0.40 Chinese led bulbs will be typically be pretty blue and dim, with short life expectancy and limited warranty/support. I went through three cheap sets in my first year of owning the G37 actually.

The ones in your eBay link have 5050 led chips which are older and don't output as light as newer led chips like 5630, 2835, 5730.

I would suggest Diode Dynamics HP5 bulbs in 6000k for maximum brightness and reliability. $20/pair of bulbs (you'll need three for doors, dome, and license plate, maybe four if you want to do the trunk too). Pricey but I can vouch that these are bright, true to color, and won't flicker within a few months. Plus 3 yr warranty with solid customer support. They also have some cool easy diy tail light and fog light mods.
https://www.diodedynamics.com/store/listed-by-vehicle/infiniti/q50.html

On the lower budget spectrum, these Amazon sets have newer 2835 led chips which are a lot brighter than 5050s. The build quality is good but I'm unsure on longevity since I only tried them for a week or two now on our Honda Accord.
https://www.amazon.com/dp/B01DE7UC6C/ref=cm_sw_r_cp_apa_-qThzb33S7D57

I second these suggestions. I replaced my maplights with these https://www.amazon.com/gp/product/B01DE7UC6C. It was a PITA removing the old bulbs. Ended up using packing tape to wrap around the bulb to pull them out.

And b/c I bought the wrong dome light bulb, I'll be replacing my dome light with this tomorrow https://www.amazon.com/gp/product/B01AHVND32

Please don't do what I did and go off a youtube link, double check these will all work in your Taco first.

Also, if you're going to be prying things apart I'd suggest a cheap (<$10) trim kit. I already had a cellphone repair kit so I used one of it's plastic pry tools.

Awesome glad I could help! You’ll have to get creative with how you install them since they have they’re own driver box kinda like HID’s (unlike the aux beam where it’s built into the light) So you’ll have to mess with it for a little until you can make it fit, and You’ll need these adapters but you probably already have them if you have the auxbeams. And if you’re looking for fog’s these are what I have and I have no complaints with them, they’re pretty bright and match the same kelvin value as the headlight LED’s

I used the following adapter:

GZXY H7 LED Headlight Car Bulb Adapter Holder Socket for KIA K3 K4 K5 Sorento SportageR Coupe Grand Santa Fe Hyundai Sonata9 Coupe Veloster 2pcs https://www.amazon.com/dp/B01J5SCQ1I/ref=cm_sw_r_cp_api_i_vho1Db8BM1VAZ

And for the LED Lights you can use any any H7 bulbs I believe. I used a company called AuxBeam.

I got these for the ambers. Still kickin since 2017. Can't say the same for the tag light or interiors tho.. Avoid big packs of cheap LEDs, they're just waiting to flicker.

Low Beam I'm quite happy with these although they don't really fit inside. You'll need something like this and optionally a pair of these to seal it up, but a lot of ppl don't.

I'm running these Auxbeam LEDs on my Mazda 3 2016. They're really good for my needs and have a much better cutoff line than the kensun LEDs. I first bought them for my girlfriend's 2016 civic and grew jealous about how much better they were than my kensun ones lol.

I got these Auxbeam ones for my 2019 low beams. Be careful, if you buy ones with a big ass fan in the back, you will have to remove the whole headlight to replace the bulb. In order to do that you would have to loosen the fenders and remove the bumpers which to me is excessive to replace bulbs. These are easy and with a bit of jiggling, they go right in. Awesome bright light.

https://www.amazon.com/dp/B01KYZU604?ref=ppx_pop_mob_ap_share

https://www.amazon.com/Auxbeam-Headlight-Headlights-headlight-6000lm/dp/B01KYZU604/ref=pd_bap_m_rp_11/153-6788983-7413167?_encoding=UTF8&pd_rd_i=B01KYZU604&pd_rd_r=7961c448-e919-4528-bf5e-76c09f49b4fe&pd_rd_w=geqIm&pd_rd_wg=vgiKV&pf_

They are great, affordable and give the truck a clean look at night.

Meguiar's G2970 Two Step Headlight Restore 2Step, 4. Fluid_Ounces https://www.amazon.com/dp/B01M75GUJB/ref=cm_sw_r_cp_apa_i_jf0nDbZ1D9DHV

has worked well on several cars in Arizona for me

If you have access to a polisher, avarax's method would provide good and longest lasting results. The PPF is not that hard to put on.

​

If you have a power drill, here is a headlight restoration kit that I used and lasts for a while.

https://www.amazon.com/Meguiars-Two-Step-Headlight-Restoration/dp/B01M75GUJB

It's fine. The tool is especially handy. However, if they are grimey or just lightly oxidized, you can use this kit.

https://www.amazon.com/Meguiars-Two-Step-Headlight-Restoration/dp/B01M75GUJB/ref=mp_s_a_1_8?keywords=headlight+restoration+kit&qid=1570269734&sr=8-8

It has the clear coat that will prevent it from recurring for a year.

If they are bad, stick with the kit you suggested, and buy that spray separate fir $8

It just rained XD. And nope, factory headlamps, I cleared them a bit with Meguiar's Headlamp Restoration thingy

Is that the halogen bulb with three prongs that presses into this weird white connector with a rubber boot? I have that on a '12 Shadow Phantom. I hated the headlight, it was garbage, and undrivable on dark country roads. I pulled the whole thing and replaced with a 7-1/2" LED Monster.

Since you're on the road, and purchasing/modifying a new headlight isn't an option, have you verified you didn't get a defective bulb (happens more than you'd think)? Pull the bulb and try to blow out the three prong connector. When I pulled mine apart, there was a ton of corrosion in that stupid thing.

Reconnect the bulb, but leave it out of the headlight bucket, and turn your key on. Wiggle the receptacle and see if it'll light up. Toggle the high/low beam switch a ton more. I found a spot on mine that the light would cut-out (due to corrosion in the switch), and it took quick a few cycles before I could get it back on...

If you've got the halogen, it's actually dual filament, so if it's the bulb or the switch, the high beam should still work and you'll be able to ride with that (still not bright enough).

Do all of your other lights work? Is the bike starting up easily? Have you checked voltage on the battery?

Final thought: If you trace the headlight wiring, there's sometimes another connector (Honda Proprietary) for the whole stupid lighting rig. I found a small white three prong that looks like the turn signal connectors, just outside of the hole for the headlight bucket. If present, it could be jostled/disconnected.

Safe ride, man.

Hi,

I updated the signaling and lighting for my 1986 Vulcan 750. It was easy to do, improved visibility, and shaved off all those dangling blinkers giving the bike a sleeker look.

The integrated taillight was bought off of eBay for around $US 28.00. The guy that I bought from is out, but I've found what looks to be the same product from another Chinese vendor at Motor-Integrated-LED-Tail-Light-Turn-Signals-for-KAWASAKI-VULCAN750-1986-2003

After removing the rear signals and the rear tail lens and brake light bulb I was able to connect the LED by putting its bayonet style connector into the brake light bulb socket and splicing the common, left and right signal wires using some Bullet terminals. I put some masking inside the lens (to hide the wiring) and put the lens back on. Easy peasy 10-20 minute job.

I also removed the front signals and replaced them with some LED triangles off of a sport bike, using the unused capacitors from the LED Tail Light kit to make them work as both signal and running lights.

Aalso replaced the old dim yellow headlight with a Daymaker style LED with integrated turn signals - which looks sharp and makes a HUGE difference in nighttime visibility (both ways). From Amazon - LED Daymaker Headlights 7 inch Round 50W Motorcycle Driving Light with DRL Turn Signal and Halo Ring

This mod was a little more involved because the new LED headlamp didn't fit the original "bucket" so I had to order a new headlamp housing and cram it all it. But it now looks like it could be original equipment, except that none of this stuff existed in 86.

Unfortunately, this was not a simple headlight swap. To make it work, it required a completely different headlamp assembly (bucket, trim & mounting rings). I used the headlight assembly off a [Kawasaki 1976-1979 KZ750-B] ( http://www.ebay.com/itm/Z1-900-KZ650-KZ750-KZ900-KZ1000-H2-KH-Chrome-Bucket-Head-Light-Assembly-/142427700153 ). You will reuse the mounting rubber inserts and bolts /nuts from your factory bucket.

Photo of my bike

I got some inspiration from a [How To video retrofitting LED projector headlight on a 1980 Kawasaki KZ750-B] (https://www.youtube.com/watch?v=O-GI4-VdCIA)

these are the fog lights

No vinyl tint.

Alla Lighting Super Bright H11... https://www.amazon.com/dp/B01N67FMQ5?ref=yo_pop_ma_swf

http://www.subispeed.com/led-front-turn-signal-bulbs-2015...


https://www.amazon.com/Alla-Lighting-H11.../dp/B01N67FMQ5/

​

using these for turn/signal lights. if you change to LED bulbs for turn signal, you will need a hyperblink module.

Check this out at Amazon.com
Alla Lighting High Power 3030 SMD New Version Xtremely Super Bright H11 H8 H16 H11LL H8LL LED Bulb Gold Yellow LED Fog Light Bulbs Lamps Replacement https://www.amazon.com/dp/B01N67FMQ5/ref=cm_sw_r_other_apa_i_9FEdBb0DBK4MY

I grabbed this one. No fan, which was a must for me. I hate that wine the small fans make. It is going strong for 5 months now (I know that's not a very long time, but all I can speak to). That's riding through rain, and 90+ F. It is a 2 pack.


BEAMTECH H4 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh (9003 Hi/Lo) CSP Chips Conversion Kit https://www.amazon.com/dp/B06XHD78DQ?ref=yo_pop_ma_swf

Yes you are seeing white at the turn signal lights. When I am using side marker lights, low beams or high beams. Those turn signal lights will be white. But when I turn left, right, and hazard it will be back to amber.

Front turn signal LED lights(7444NA):
https://www.amazon.com/iBrightstar-Newest-Bright-Projector-Replacement/dp/B077P5CDSX/ref=sr_1_fkmr0_2?ie=UTF8&qid=1523552526&sr=8-2-fkmr0&keywords=ibrightstar%2Bx001Cy5ax1&th=1

Front head lights type: 9003/H4/HB2. If you want fog lights it is H8(H11/H8/H9):
https://www.amazon.com/LED-Headlight-Bulb-Conversion-Kit/dp/B075J8VQDX/ref=sr_1_3_sspa?s=automotive&ie=UTF8&qid=1521933924&sr=1-3-spons&keywords=h4+led&psc=1
DO NOT remove the original manufacture Dielectric Grease on the H4 socket. Unless you using some other brand of Dielectric Grease.

Side marker lights(2) has a bunch of names too. Type 194, T10, W5W(These are also the same lights for driver side(1), front passenger side(1), back passenger(1), trunk(1) and license plates lights(2)):
https://www.amazon.com/AUXITO-Chipsets-Replacement-Courtesy-License/dp/B071LHP5WP
So, this 10 pack you will be using 8 out of 10. Remember if it doesn't work turn it 180 degree.
https://imgur.com/a/gewfk

Back Reverse lights and back turn signal lights. Type 7443 you will have to get 2 of this. Making it 4 LED bulbs.
Not to worry that the LED is white for turn light. Because the back housing is RED. So White LED + RED = Bright Red. Be warn: We didn't use resistor front and back. So, we are getting hyper flashing.
https://www.amazon.com/iBrightstar-Newest-Projector-Replacement-Reverse/dp/B06XQWPKKX/ref=sr_1_fkmr0_1?ie=UTF8&qid=1523552407&sr=8-1-fkmr0&keywords=ibrightstar%2Bx001mz3ma3&th=1

For the back lights, you will need to use the philip screw driver, the X kind. So, you can take out the housing and install the LEDs. The very top red part are turns on when you use Side markers, low beam and high beam. And those top red lights are LED already. So you don't have to change those. All you need to do is the White one and the bottom Red one for both side. So you need a total of 4 LED type 7443.

You might want to get trim tools. Unless you want to use a t-shirt and a flat head screw driver. But having trim tools can help you with wire management for heads up display and for dash cam wire. I do recommend the trim those thats 13pcs or 14pcs. Because that 1 or 2 extra tool with give you the option to pop those plugs under the front of the car if you are going to replace the fog lights(H8 according to the manual).

Other things we have:
Heads Up Display Model A8:
https://www.amazon.com/gp/product/B071418CKC/ref=oh_aui_detailpage_o01_s03?ie=UTF8&psc=1
Now you don't have to guess what speed you are on. We really hate that analog speedometer. 2018 and we still using analog. I notice they are out of stocks. Here are list of HID Model A8: https://www.amazon.com/s/ref=sr_gnr_aps?rh=i%3Aaps%2Ck%3AHeads+up+display+A8&keywords=Heads+up+display+A8&ie=UTF8&qid=1525533852

OBD2 Y-Cable:
1 is for the Heads up display, and the other one for those check warning device.
https://www.amazon.com/Docooler-16Pin-Splitter-Extension-Female/dp/B000TMCX72/ref=sr_1_7?s=automotive&ie=UTF8&qid=1523574579&sr=1-7&keywords=OBD2+y+cable

OBD2 Scanner car diagnostic tool:
https://www.amazon.com/Upgraded-Chip-WIFI-Scanner-Diagnostic/dp/B075B3CG7S/ref=sr_1_23?s=automotive&ie=UTF8&qid=1523574641&sr=1-23&keywords=obd2+check+engine
there are other ones. You might want to do your research before buying one.

Windshield wiper. Front driver side is 28 inch, Front passenger side is 14 inch. Back rear is 14 inch.
We use this brand. Since silicone last longer than rubber: http://www.piaa.com/aerovogue
We replace the whole thing for the front 2: Pick 28inch and 14inch.

Front Passenger side - 14 Inch: https://www.amazon.com/96165-Vogue-Silicone-Wiper-Blade/dp/B00JA390K4/ref=sr_1_1?s=automotive&ie=UTF8&qid=1523575183&sr=1-1&keywords=piaa%2BAero%2BVogue&th=1

Driver side - 28 Inch: https://www.amazon.com/gp/product/B00JA39676/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

I believe this is what we got for the back. It is a refill blade. Be warn. It is hard to installed.
https://www.amazon.com/PIAA-94035-Silicone-Wiper-Refill/dp/B003NCBGYG/ref=sr_1_1?s=automotive&ie=UTF8&qid=1523575369&sr=1-1&keywords=piaa+14+inch+refill

Coolant: https://www.amazon.com/gp/product/B006YX9YZE/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Funnel + Tube: https://www.amazon.com/gp/product/B072N5NZXS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Trim Tools 12-PCS: https://www.amazon.com/gp/product/B072HYD91Y/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1


Also, Scotty Kilmer use PIAA silicone wipers:
https://www.youtube.com/watch?v=3AFdUihWPCk

Optional: Dielectric Grease for the bulbs.
https://www.youtube.com/watch?v=zhl3bLzgq9A

I suppose the difficulty would depend what your local junkyard has because everything I got for my car from there was an 'option' to buyers. Lots of them came on the LTZ.

The 3 brushed aluminum pieces, leather shifter cover, dimming mirror, and heated mirrors cost me 53$

yes I got all the LEDs from amazon

Courtesy, trunk and license plate

Dome Lights

Reverse Lights

Headlights

I don't think I am going to go with LED brake lights and turn signals because I was reading on the forum that it can cause problems, and I don't feel like dealing with it.

Nice, I have summit grey as well and this makes me want to wrap the trim red as well. I just did my interior lights, plate lights and back up lights with LED bulbs. Links in case anyone is interested, I get no flicker.

https://www.amazon.com/gp/product/B071LHP5WP/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0728DYR9H/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B074M5Z9YX/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Got the headlight H4 LED from Cyclops. Looks like they're out of stock right now: https://www.cyclopsadventuresports.com/Cyclops-100-H4-LED-headlight-bulb_p_192.html

It was super easy to install and fit very well.

​

For the parking lights I got these: https://www.amazon.com/gp/product/B071LHP5WP/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I used these lights, they work for most of the lights you will encounter in a Camry, no dead ones, been working great for a year so far: 194 LED Light bulb, Yorkim 2017... https://www.amazon.com/dp/B00JRE38EA?ref=ppx_pop_mob_ap_share

Use this for the reverse:
AUXITO 912 921 LED Backup Light... https://www.amazon.com/dp/B0728DYR9H?ref=ppx_pop_mob_ap_share

I use Sylvania Silver Star Ultra for headlights

I also replaced my assembly with this:
Anzo USA 121181 Toyota Camry Projector with Halo/Black Clear with Amber Reflectors Headlight Assembly - (Sold in Pairs) https://www.amazon.com/dp/B0038AX6W8/ref=cm_sw_r_cp_apa_i_X9ACCb8QDG00C

I installed the a129 last week. Seems to be running ok but haven't tried parking mode as there is still complaints about it's recording algorithms. Waiting for a more reliable firmware update. I had an a119s that ran fine in high temps for 3 years. Due to the steep angle of the windshield or the fov of the camera I opted to install my camera to the right of the rear view mirror. It looks more centered than to the left of the mirror. I haven't gotten around to running the rear camera. Im going to have to run it through the door sill rather than the headliner as there's no where to tucknin that thick wire for the rear cam. Also my rear hatch glass has dark tint on it so I'm not sticking the cpl on that.

Idk if it was just my dark tint making it hard to see but I've replaced the rear back up lights with these. Reverse is MUCH brighter now.

Right now I'm looking for a door sill vinyl with "fit" written on it. My fit already has a rather noticeable scuff on the driver's door. So far the only where I've seen a good looking one is Alibaba but I'd rather not buy from there. Amazon has one but it's not the same and also doesn't have prime shipping. If I can't find anything I'm problably going to add a "carbon" universal sill decal.

Recently picked up Katana H11's

Only running them on low beams right now as I start to swap out the rest. Based my information off of Bulb Facts -> the projector recommendations

I've heard great things about the Supernova V4's

​

EDIT: FWIW, Amazon has a lightning deal on Hikari H11 Bulbs right now.

Changing the headlight bulbs won't void your warranty.

If you want a white light then you'll have to either swap the bulbs with an LED kit (cheap), or replace the entire headlamp assembly with an LED assembly (expensive).

There are cheaper LED kits than the one I linked but I would be wary of their quality. Replacing the assembly costs more and takes more work, but the light output is much better.

I got this one, works quite well.

SKTYANTS 7" 7 Inch led Headlights with 7 inch Housing Bucket DRL Turn Signal Lights Motorcycle for Harley Da-vidsion https://www.amazon.com/dp/B078MVXJBL/ref=cm_sw_r_cp_apa_i_1dYwDb2GWFVBQ

So it was converted by a shop in the Portland area, but they essentially just rigged up a couple Home Depot brackets to hold the speedometer in place:

http://imgur.com/tkcSpCP

http://imgur.com/hGMSl9h

http://imgur.com/wUkNzX1

And then I bough and installed this headlight unit:

https://www.amazon.com/dp/B078MVXJBL?ref=ppx_pop_mob_ap_share

All things considered it looks pretty good I think!

These fit great and should be plug and play for the low beams - H11 LEDs I used (amazon)

This is the adapter cable for the H1 depending on what brand you use - Amazon link

Fanless style H1 LEDs (I haven’t tried these so you may need to try them and see) - Amazon Link

I ordered these for the regular headlamps. Theres a place on the metal right by the lamp to stick the double sided adhesive pad They look nice, just put em on today and the sun's still out so I haven't seen em at night yet. I can link a pic when it's dark. I used regular halogens for the fog lights cause I kinda like the contrast of the ice blue on top and light yellow on the bottom.

Edit: the fog lamps are the same size as these if you want to do both as LEDs

I don't think the instructions say when to reapply. The amazon comments seem to say once a month or once every eight weeks. I've gone almost a year without reapplying, but I parked in a covered garage at home and work, so that limits my car's UV exposure.

https://www.amazon.com/Blue-Magic-730-6-Headlight-Sealer/dp/B0051PJWQW/ref=sr_1_1?ie=UTF8&qid=1485542376&sr=8-1&keywords=blue+magic+headlight+sealer

I'll apply wax, let it dry, buff out by hand then a quick pass with this stuff.


https://www.amazon.com/Blue-Magic-730-6-Headlight-Sealer/dp/B0051PJWQW

Every now and then or whenever I feel like the shine has dulled down a bit I'll go over the bare headlight with some Plastx before applying the wax and sealant and I'm good as new again.

I've been using Blue Magic as a sealant with some success after polishing headlights.

Headlight Sealer

re: Headlights - Just get a kit that includes the varying grades of sandpaper, polish, and sealant.

https://www.amazon.com/SYLVANIA-Headlight-Restoration-Headlights-Protection/dp/B00429NKWK/ref=sr_1_4?keywords=Sylvania+Headlight+Restoration+Kit&qid=1564499880&s=gateway&sr=8-4

https://www.amazon.com/3M-39084-Headlight-Restoration-Kit/dp/B006VB8JTQ/ref=sr_1_8?keywords=3M+Headlight+Lens+Restoration+System+29008&qid=1564499884&s=gateway&sr=8-8

​

Soap: DO NOT USE DISH SOAP! Ever! It doesn't strip wax, but it does leave behind a film. If you want to be cheap, just get Megs Gold Class.

​

There's no reason to rinse after claying. Use either a detailing spray or a mix of Megs Gold Class shampoo and water, and dry after you finish a section.

​

There's also no reason to rinse after polishing. Just do an IPA wipe.

Used this to give my Bob some TLC. There was only really minor yellowing, but I'm shocked what a difference it makes. Now he looks a little more hip.

This followed by this fill out to find the part # and search on Amazon as well

When what dried? Did you seal it? If you used a sealer before you buffed and polished the lens that's what could have caused this. What you need to do is restart. Sand the sealer off, and then take it easy with the sanding. And by sanding

I mean wet-sanding. I hope you weren't just using sandpaper and no lubricant lol.
Wet-sand it back down till it's smooth and hazy. Then take some rubbing compound and then buff the hell out of it till it's clear. I went crazy with mine and buffed them for a couple hours each, but i go overboard on everything. After it looks clear, wipe off the excess and let it dry. Then spray your sealant on it. Like spray paint if you get too close it'll drip, too far it won't cover fully.

I actually wet-sand mine with the 3M restoration kit: https://www.amazon.com/3M-39084-Headlight-Restoration-Kit/dp/B006VB8JTQ/ref=sr_1_4?ie=UTF8&qid=1493511799&sr=8-4&keywords=3m+headlight+restoration+kit

And for a sealer i used: https://www.amazon.com/Presta-137306-Headlight-Sealant/dp/B0082LFOFA/ref=sr_1_1?ie=UTF8&qid=1493512126&sr=8-1&keywords=renulite.

Expensive sealer I know. But I did research on it and a lot of shops use it. They actually give 3 year 30k mile warranties with it when they would redo headlights for people. So it's a good product. I used it on mine about 4 years ago and it's just starting to come off.

Hope this helps!

Good tires. I like the General Altimax RT43. Regular oil changes. Regular tire rotations. Fresh fluids all around. The simple easy shit we all should be doing really.

You could also hit up your local walmart/auto parts store and buy the 3M headlight resto kit. Will get the haze off the lights and leave them shiny new for a bit. Helps a ton when there is no haze on the lenses.

https://www.amazon.com/3M-39084-Headlight-Restoration-Kit/dp/B006VB8JTQ/ref=sr_1_1?ie=UTF8&qid=1504839693&sr=8-1-spons&keywords=3m+headlight+restoration+kit&psc=1

So was I. This is the one i bought , but they make several kits and even the in-page description is for a different one. 39084 doesn’t include the drill attachment or a sealer. I guess since the others do I’ll definitely need something?

Also, the 3M Headlight Restore kit is ~$13 with a $2.00 coupon and $5.00 rebate = ~$6.00

http://www.amazon.com/gp/product/B006VB8JTQ/ref=vp_c_A3VLRNJSASW98Y

Yes! HID retrofits, first mod that I did within 48 hours of buying the car. Highly recommend, and it cost like $80 total

I followed this thread: http://forum.miata.net/vb/showthread.php?t=454405

Granted there were some differences, for example I used a heat gun instead of my oven, but generally I followed that pretty closely.

These are the projectors I got: https://www.amazon.com/Nilight®-Mini-Bixenon-Projector-Lens/dp/B00B21R0TA/ref=cm_rdp_product

And here are the HIDs (6k I think):

https://www.amazon.com/gp/product/B00KJ8JK9K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1&th=1

I can post pictures from my own build a little later in the week if you remind me - I don't have them on this phone.

I bought this kit off amazon
https://www.amazon.com/dp/B00B21R0TA/ref=cm_sw_r_cp_apa_i_aJhoDbKWCRMNN

So far the output looks great and I saw someone else on the Miata forums use this kit with success.

Here is the cheapest set of projectors I could find online. You still have to buy ballasts and bulb, and a relay wiring harness. It runs about $100.

You don't just drop in projectors typically. Usually there is some dremel modification required.

You may actually be able to find some pre-built projector housings for yours. I looked and looked and looked, and the only pre-built projector housings I could find for the Vue were for year models 07 and up. Mine's an 03.

So I had to build mine. And the parts I used were pretty cheap so you might save money just building your own anyways.

Here's the parts I used

Nilight 2.5" Mini HID Bixenon Projector Lens

2x 23inch Dual Color White-Amber Switchback Headlight LED Tube Strip Light DRL Daytime Running Light & Turn Signal Lamp For Audi-Style Headlight

RetroRubber OEM Grade Butyl Headlight Sealant, Black

Everbrightt 1-Pair White 70MM 60SMD COB LED Headlight Angel Eyes Bulb Halo Ring Lamp Light With Housing

2pcs 12V HID Xenon AC Car Ballast 55W HID Xenon Bulbs Lamp For Auto Headlights For H1/3/4/7/8/9/10/11 9005 9006

HID-Warehouse HID Xenon Replacement Bulbs - H1 8000K - Medium Blue (1 Pair)

The paint I used was just a can of Rustoleum semi gloss black I got at Walmart for a few bucks.

I also purchased a separate set of headlights to do all this with, as this was my first time. I wanted to be able to take as much time as I needed with it. I can also easily switch back to stock at any time for whatever reason. I would suggest you do the same, if you're planning on building them.

To get them apart, I preheated our kitchen oven to 220 degrees. I lined an old baking pan with a wet towel and set the headlight on it, then put it in the oven for 10 minutes. This will soften the sealant enough so that you can pry the light housing apart.

Then when you're done with all of your modifications, remove as much of the old sealant you can and then line the edges of the housing with the new sealant. Heat it up like before and compress it back together.

these: https://smile.amazon.com/gp/product/B00B21R0TA/

I bought 3 sets for 3 cars, all came out pretty good.

I personally use NuLens Restoration Kit. However, it requires a drill to use.

Link: Mothers 07251 NuLens Headlight Renewal Kit https://www.amazon.com/dp/B00GZLMEPM/ref=cm_sw_r_cp_apa_i_ZsnlDbZK9TT5F

I bought this at my local O'Reilly's, however the price on the link is currently cheaper than when I bought it in store

The crap ones are crap. This one is legit and kicks ass, as long as you have a power drill to run it

Sure. Philips H11 X-tremeVision Upgraded Headlight Bulb with up to 100% More Vision, 2 Pack https://www.amazon.com/dp/B00U1OIESK/

For plug and play: https://www.amazon.com/Philips-X-tremeVision-Upgrade-Bulb-Pack/dp/B00U1OIESK/

I'm about to buy an HID kit for mine. I can't stand how dim it is on country roads at night.

I just put these lights on my wife's 2010 Forester. The difference is astounding compared to stock. Especially when she's been driving around with one burnt out OEM light because I've been lazy. It jives with what you said because they are 3400K.

Don't put LED replacement bulbs in the stock assemblies. They're too glare-y and don't really help (I did for a while, swapped them back out).

Try these bulbs, they're quite a bit brighter: https://www.amazon.com/gp/product/B00U1OIESK/

I purchased these for my 2014 6 touring to replace my low beams. I love them. All hardware needed was included.

OPT7 LED Headlight Bulbs
https://www.amazon.com/dp/B00VNBDWPK/

The owners manual has good install instructions. The whole install process took me about 30 minutes. I had to go through the wheel well to access the bulbs.

Hope this helps

Led and hid replacements don't work nearly as well in a reflector lens, they do much better in a projector style housing. As in, they'll have bright and dark spots and blind oncoming traffic.

That said, these are what I put in my wife's Acadia (projector headlights) and I'm super happy with these, even though I had to massage the housing to fit.

OPT7 Fluxbeam H11 LED Headlight Kit w/ Clear Arc-Beam Bulbs - 60w 7,000Lm 6K Cool White CREE - 2 Yr Warranty https://www.amazon.com/dp/B00VNBDWPK/ref=cm_sw_r_cp_apap_gW4TY7dxxnUtP

Switching to LEDs would allow OP to remove all the complicated added circuits from the HIDs. Is it possible this is causing his problems? I believe it would help rule it out, at least.

Either way, I do recommend switching to LEDs if you can. You get rid of that extra wiring and LEDs are plug and play. I bought these and they are brighter than my OEM halogens but not as bright as most HIDs I have seen. They do spread a lot of light with the reflector housing, but I imagine your HIDs do the same thing anyway.

I purchased and installed the Opt7 LEDs for my low beams and am very happy with them so far. My main reason for going with these is the thread on TacomaWorld with many users being happy with the results. I didn't like the yellow light of the stock halogens, especially when compared with the white LED DRLs on the headlights.

The Opt7 LEDs match very close with the DRLs. The light output is about the same as the stock halogens but looks so much better in my opinion.

I got them on Amazon but I think you can find them cheaper in eBay.

OPT7 LED Headlight Bulbs w/ Clear Arc-Beam Kit - H11 (H8, H9) - 60w 7,000Lm 6K Cool White CREE - 2 Yr Warranty https://www.amazon.com/dp/B00VNBDWPK/ref=cm_sw_r_cp_api_XSR2xbG3209VW

> high beams are halogens

Fortunately, there are plenty of cheap, quality LED replacements.

I did not have to re-aim the opt 7 at all. They have a good beam pattern. Depending on your car you may have to flip the ring on the bulb to adjust the spread. Im very happy. 15 minutes and done. I was going through about 4-5 packs of silverstars a year.

Example

https://www.amazon.com/OPT7-FluxBeam-Headlight-Clear-Arc-Beam/dp/B00VNBDWPK

Not sure if this helps but I did buy led lights for my car http://www.amazon.com/OPT7-Headlight-Bulbs-Clear-Arc-Beam/dp/B00VNBDWPK/ref=sr_1_1?s=automotive&ie=UTF8&qid=1450736726&sr=1-1&keywords=led+headlights and I turn off my headlights and I'm not sure if it's a coincidence but once i turn my headlights off the fronts start working again

Not to sure if it's a coincidence or not

Yeah, it's pretty crazy. I think they want BMW's to be more affordable to people. They're nice, yeah, but now the $30,000 base models come with 4 cylinder engines, cloth seats, halogen headlights, etc. You gotta pay attention to all the packages available. You could always try a kit like this:

https://www.amazon.com/OPT7-Headlight-Bulbs-Clear-Arc-Beam/dp/B00VNBDWPK/

Take a look at the customer images to get an idea if the color temperature you'll get. Again, it'll look nicer... but, some people are gonna hate you for it.

I’ve had these for ~5 months and think they are great. Had to cut away some of the stock rubber covering but was super easy and all fits well.

OPT7 Fluxbeam LED Headlight Kit w/ Clear Arc-Beam Bulbs - H4 (9003) - 80w 7,000Lm 6K Cool White CREE - 2 Yr Warranty https://www.amazon.com/dp/B00VNBEJ1G/ref=cm_sw_r_cp_api_JrrbAbFWGG5NY

I literally just put these on my 1999 L!

http://www.amazon.com/dp/B00VNBEJ1G/ref=twister_B00VNBD8PO?_encoding=UTF8&psc=1

I have only had them for a few days, but they are incredibly bright. I would also recommend replacing your cracked housings...

http://www.amazon.com/Depo-320-1108R-ASN-Passenger-Replacement-Headlight/dp/B004I18C2U/ref=sr_1_1?s=automotive&ie=UTF8&qid=1459193789&vehicle=1999-13-57-------------0&sr=1-1&ymm=1999%3Asubaru%3Aforester&keywords=1999+subaru+forester+headlight+assembly

https://www.amazon.com/OPT7-Headlight-Bulbs-Clear-Arc-Beam/dp/B00VNBEJ1G

My Street Triple R came with a Puig aftermarket LED tail light, so unsure on that one. I'll link you the ones I picked up for headlights.

Edit : https://smile.amazon.com/OPT7-Fluxbeam-Headlight-Clear-Arc-Beam/dp/B00VNBEJ1G

Puig tail tidy complaint - the license plate light LED unit is sealed, nonservicable, and died on me last week, $30 to replace. Tsk

Edit Edit - Nevermind, the LED tail light is stock on 2013+.

Any LED lights would do, I got these off of amazon for 90 bucks and they've been good, just remember to adjust the height so you dont blind oncoming traffic
https://www.amazon.com/dp/B01B376YOE/ref=cm_sw_r_cp_apa_i_k3NJDb53EMND1

Amazon has them in black (pair) and chrome as a single unit (you will need to buy a pair of them). I have the chrome one on my Harley and it works amazing.

Are these yours? https://www.amazon.com/dp/B01B376YOE/

My aftermarket headlights have a broad light at night and not really focused on the ground even when I adjusted them down. Worst part is when they are on they mess with the radio performance. Googling says cheaply made lights put out noise that could affect radio frequencies. The previous owner of my jeep put them on and I just been living with them. I was willing to spend for the JW speaker ones but if I can save $400, more money for other mods, lol.

Sure.
https://www.amazon.com/gp/product/B01B376YOE/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

I went with these and I've been very satisfied. DOT compliant beam pattern, no flicker, and good output. Been very happy overall.

do you have the link perhaps? https://www.amazon.com/JDM-ASTAR-Bright-Chipsets-market/dp/B01DE7UC6C

I used these for my sidemarker lights and they are significantly brighter than the original bulbs. All my exterior lights are now LED except for the headlights, along with some of my interior lights. The only part we both share are the reverse lights. I didn't like using red LED's. The output through the lens was less than using white LED's. I may try your XOR gate to see if output can be increased even further, but it probably won't unless I switch bulbs. The bulbs you're using are probably brighter than mine. The sad part about the sidemarkers is that there's very limited space, so big 1000+ lumen bulbs won't fit. These were the first bulbs I tried for the sidemarkers. I think I have them installed in my map lights now.

The all day aspect is why I converted to LED. I don't want as much risk of draining my battery, and that happened on a long weekend camping trip when I left a map light on, which caused me to finally address my interior.

Here’s the adapters you’ll need

https://www.amazon.com/dp/B01J5SCQ1I/ref=cm_sw_r_cp_awdb_t1_tVuTCbSTECJTB

I have a BK2 and replaced the low beams and marker lights with LEDs and the turn signals with switchback LEDs.

I used these H7 bulbs for the lows: Cougar Motor H7 LED Headlight Bulbs, CREE All-in-One Conversion Kit - 7,200Lm 6000K Cool White https://www.amazon.com/dp/B07HKFSRX2/ref=cm_sw_r_cp_apa_i_4jqXCbAJ2CT5Y

And these adapters: GZXY H7 LED Headlight Car Bulb Adapter Holder Socket for KIA K3 K4 K5 Sorento SportageR Coupe Grand Santa Fe Hyundai Sonata9 Coupe Veloster 2pcs https://www.amazon.com/dp/B01J5SCQ1I/ref=cm_sw_r_cp_apa_i_WlqXCbTQ5G0NQ

These for the side markers: SiriusLED Extremely Bright 3030 Chipset LED Bulbs for Car Interior Dome Map Door Courtesy License Plate Lights Compact Wedge T10 168 194 2825 Xenon White Pack of 10 https://www.amazon.com/dp/B0186P1MUW/ref=cm_sw_r_cp_apa_i_PmqXCbB8G4STA

And these switchbacks: https://www.diodedynamics.com/switchback-turn-signal-leds-for-2013-2016-hyundai-genesis-coupe-pair.html



I ended up glueing the adapters onto the existing adapter already on the LED with Loctite. The hardest part was stuffing the low beam pig tail into the housing. It takes a bit k, but it is doable. I uses a 1 1/4" spade bit to drill a hole in each low beam cap for the LED fans to vent. A holesaw bit may work better. Everything else was plug and play. I still need to swap out the turn signal flasher to fix the switchback's hyperblink. I wasn't able to do the high beams because there wasn't enough space to tuck the LED pigtail in there. Any ideas for that?

Anyways it is super bright! Way brighter than the Sylvania zXe halogens I was using before. Fog lights are next then tails.

I got these and love them easy install
Auxbeam LED Headlight Bulbs F-16 Series LED Headlights with 2 Pcs of H11 headlight Bulbs 60W 6000lm CREE LED Chips Fog Light https://www.amazon.com/dp/B01KYZU604?ref=yo_pop_ma_swf

Go with the F16 models.

Auxbeam H11 - https://www.amazon.com/dp/B01KYZU604/ref=cm_sw_r_cp_apa_i_7td0Db75P44T7

Auxbeam 9005 - https://www.amazon.com/dp/B01G16BWLC/ref=cm_sw_r_cp_apa_i_gvd0DbGBCFQ01

Those are the low and high beams. Took like 20 mins to install both.

https://www.amazon.com/gp/product/B01KYZU604/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I've had these in for a few months now and I absolutely love them, but be warned you will piss people off. They're very clear and very bright and there will be people who hate you. Still recommend though!

Yep they say the sealer is good for a year.

Meguiar's G2970 Two Step Headlight Restore 2Step, 4. Fluid_Ounces https://www.amazon.com/dp/B01M75GUJB/ref=cm_sw_r_cp_api_i_p0kwDb8NPH4Z0

Loli don't have a bike yet but already started looking at headlight and looking into tail lights as well. So far the best headlight i have foubd is this one:


LED Headlights-7"/7 inch Round 50W Cree Hi/Lo Beam Motorcycle Driving Light with DRL Turn Signal Halo Ring Angle Eyes

Not sure if you like it , I personally do. And hopefully this is not pulling as much as the other.

Edit: i do wanna say I’m not sure if they are dot approved but i think they are as it says DOT SAE on the headlight

LED Daymaker Headlights-7"/7 inch Round 50W Cree Hi/Lo Beam Motorcycle Driving Light with DRL Turn Signal Halo Ring Angle Eyes for Harley Davidsion https://www.amazon.com/dp/B01MS8NK62?ref=yo_pop_ma_swf

I was thinking of this one.

SUPAREE 7 inches LED Motorcycle Headlight for Harley Davidson Touring Road King Ultra Classic Electra Street Glide Tri Cvo Heritage Softail Slim Deluxe Fatboy Chrome https://www.amazon.com/dp/B01MS8NK62/ref=cm_sw_r_cp_api_i_yDTCDbHXS5KSY

From Amazon. It was this one:
7inch Round 50W Cree LED... https://www.amazon.ca/dp/B01MS8NK62?ref=ppx_pop_mob_ap_share

I converted my SFV650 to this light and an eBay 7" bucket and am happy with the results.

No prob. Although I got these installed

Nokya Hi-power H8, H9, H11 LED Fog Light Bulb - Hyper Lime Yellow https://www.amazon.com/dp/B00BFL7P7E/ref=cm_sw_r_cp_api_knuWzbDAR04Z2

I would recommend getting these due to lower price and reliability according to my installer.

Alla Lighting High Power 3030 SMD New Version Xtremely Super Bright H11 H8 H16 Type 2 Gold Yellow LED Bulbs for Fog Light Lamps Replacement https://www.amazon.com/dp/B01N67FMQ5/ref=cm_sw_r_cp_api_CpuWzbXVC9WTJ

The fog led bulbs are the only part I brought seperately. He painted the fog housings with yellow anodized paint to withstand the elements.

I have Kensun 4300K HID's for my low beam, Qcheye 6000K LED's for the high beam, and Alla 3000K LED's for the Fog lights. Pretty much the brightest, most functional light colors for any condition. I live in AK, so super dark, snowy, wet crap conditions for driving all winter.

Just a note, the low beam projectors don't have enough room to fit LED units with built-in heat sinks.

These right here! https://www.amazon.com/gp/product/B01N67FMQ5/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Really great value for the quality of the bulb. And they're a true yellow, the picture makes them look a little green, but they're a pure yellow in real life.

Heat is not a problem, in my experience. I've been using Beamtech H4 replacements since late last year. Specifically, these:

https://www.amazon.com/BEAMTECH-Headlight-8000Lumens-Extremely-Conversion/dp/B06XHD78DQ

I like these particular units because they have no moving parts. No cooling fan, but rather a heatsink base. No fit problem - they are drop-in replacements for the stock lamps.

It's been routinely around 100°F in the afternoon, this summer. You'd think if there were a problem with the LEDs overheating, I'd have seen it by now. I haven't.

Beam pattern is comparable to stock H4 lamps. Maybe a little better to the side on the "low beam" setting.

That said, low-beam upper cutoff is not quite as sharp as it was with the stock H4's. But, I haven't had any indication that I'm blinding anyone. If I did, the headlamp aim could be adjusted.

A good way to work out aiming is to only change one bulb, then point the bike at a wall or garage door at night (or in your garage with the door closed, anywhere you can clearly see the pattern). Bike must be held upright, but not on a center stand, as that won't give an accurate picture. You'll quickly see whether the LED lamp is throwing a higher or lower pattern than the stock bulb, and can adjust accordingly.

I moved to LED headlamps to save power, because I needed it for heated gear.

I did these:

BEAMTECH H4 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh (9003 Hi/Lo) CSP Chips Conversion Kit https://www.amazon.com/dp/B06XHD78DQ

I am very happy with them. I have a 2nd gen Taco. Not sure of your size/application but the brand and model I got I am happy with.

Edit:just saw op's h11 so edited.

As stated, probably one of the side clips out of position. I installed these BEAMTECH H4 LED Headlight Bulb,... https://www.amazon.com/dp/B06XHD78DQ?ref=ppx_pop_mob_ap_share. Bright, but not too bright (LUX meter). I had a problem with regular bulbs blowing from the bumpy roads here. It was an excersice in patience to get the clips around the heatsinks. I slit the boots just enough to stretch them over as well.

This is what I installed in my FZ07.

https://www.amazon.com/gp/aw/d/B06XHD78DQ?psc=1&ref=yo_pop_mb_pd_title

Where’d you get your cluster done at? Mines looking pretty dim but on later 1st gens they soldered in the bulbs which makes replacing them not as easy and I’m not comfortable enough to do it myself.

For the doors I got these: AUXITO 194 LED Light Bulb 6000K... https://www.amazon.com/dp/B071LHP5WP?ref=ppx_pop_mob_ap_share

They also work in other areas like the map lights, license plate lights, and I think even the bed light but I haven’t tried it yet.

I used these for the dome lights in the rear: LUYED 2 X 570 Lumens Super Bright... https://www.amazon.com/dp/B0177DD3E2?ref=ppx_pop_mob_ap_share

My AC control doesn’t have working lights either, sometimes the fan speed side comes on if I hit it but not all the time so I’d love an answer for this too.

Just so you know I have a 2007 Silverado Classic so it should match yours

These are 194's theyll work in the trunk and the running light in the headlight housing and for license plate lights

https://www.amazon.com/gp/product/B071LHP5WP/ref=oh_aui_detailpage_o09_s03?ie=UTF8&psc=1

These are 912/921's that i put i the reverse housing
https://www.amazon.com/gp/product/B0728DYR9H/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1

oh i didnt even notice that you said Q50, these are for my g35 and g37's im sure infiniti hasnt changed the bulb size but id double check to be sure.
http://www.modifiedlife.com/2014-infiniti-q50-change-light-bulb-size-guide/
This site is what i usually go by and it says there arent bulbs to change.

my best advice is to yank out the OEM bulb and look for a part size, if they do indeed match one of these auxito lights, it will defintiely make a HUGE difference.

Thanks! I'm trying to restore/improve it every chance I get, headlights are a good idea. I've already replaced interior lights with high quality LEDs, and installed projector courtesy lights, it really is such a nice feature for so cheap and easy to do! Next project is installing a dash/backup cam mirror kit, can't wait!

Find the Auxito LED Reverse Lights 6000k/1000lm for T15, 912, 921, 906, 904, W16W, and W5W here: https://amzn.to/33YtODa

I switched everything over to LED and haven't looked back. I use the 6000K Lasfit 9005 for the DRLs

And the 6000K H8 Hikari Ultrasfor my headlamps.

I didn't need to readjust my lamps from their stock location. Lots of light. Love'm.

The DRLs have a little flicker to them but I tried a few different solutions to fix it and none of it worked. Now I kind of like the flicker and feel it actually makes them more safe.

I bought some LED bulbs off Amazon, been working pretty well once I got the cutoff dialed in. I have the Hikari bulbs for our specific housing, and they have pretty good output for LED bulbs, if a little pricey. Cutoff is dead flat, and there are only minor hotspots.

Be aware you're going to have to adjust the cutoff so you don't blind anyone. On our cars, there's a hole in top of the headlight assembly to access a gear to move the headlight up or down. You can use a Philips screwdriver to adjust it.

I've been using these for the past couple weeks and they work well
HIKARI Ultra LED Headlight Bulbs... https://www.amazon.com/dp/B077BT6M6Z?ref=ppx_pop_mob_ap_share

As long as you install the correctly and angle the beam low enough

i'm using this and can vouch for it:

https://www.amazon.com/HIKARI-Headlight-Conversion-Lumileds-Warranty/dp/B077BT6M6Z

i got both the low beams and high beams on Amazon deal of the day and paid $72 each..

Pros - super bright, easy installation, reputed and well priced

Cons - none to slight dark spots (ymmv), can hear the fan if the light are on and the engine is turned off (doesn't bother me)

Here is a link of the ones i would suggest. These are the Ultra ones with greater light output. i have the cheaper ones and i love them. you know the higher you go the worst visibility is. anything higher than 6k is cosmetic only and starts giving worst visibility. and personally its more of a JDM look, but everyone has there preferences.

I've been using these for about a year now and they're good.

https://www.amazon.com/HIKARI-Headlight-Conversion-Lumileds-Warranty/dp/B077BT6M6Z/ref=mp_s_a_1_3?crid=36YS5QXQ560C0&keywords=eye+of+megatron+led+headlight&qid=1556886062&s=gateway&sprefix=eye+of+megatr&sr=8-3

Just check the reviews.

https://www.amazon.com/dp/B077BT6M6Z/ref=cm_sw_r_cp_api_i_HmeVDbHK54C1Z

H11 and 9005 if I recall correctly for the hi and low beams

HIKARI Ultra LED Headlight Bulbs Conversion Kit -H11(H8,H9), Prime LED 12000lm 6K Cool White https://www.amazon.com/dp/B077BT6M6Z/ref=cm_sw_r_cp_api_i_s3iRDb241SQKJ

Keep in mind I have the 18 SI so I’m not sure about differences between the 19/20.

I have an LED headlight assembly I'd be willing to sell you. I had it on my SV650 originally but I decided to buy a halogen headlight assembly instead because I like how it looks better than the LED. The led assembly is pretty nice though, I bought it from Amazon for $100 and it has Integrated turn signals if you decided to use them. It's still in good shape, I'd say $50 would be fair for it. Here's what it looks like on my bike: http://imgur.com/a/xraOlqr

Here's also a link to it on Amazon: https://www.amazon.com/dp/B078MVXJBL/ref=cm_sw_r_other_apa_i_g.RADbQ49QRX4

I bought it on amazon with the bracket 7” LED Headlight . The plug for the headlight fits the plug on the bike, it also comes with an adapter if you have a newer bike with a different plug. Check your bikes schematics to wire into the left and right turn signals and find the wire that powers your running lights to hook up to.

This is one of them

non-existant. I've attached a link to the Headlights. Theses are not specific to my bike so I had to do cut the plugs out and connect the wires manually, and I believe they are done right.

Is one of the wires in the old turn signal unnecessary? Can I just splice one of them to my new turn indicators.

​

This is the product https://www.amazon.com/gp/product/B078MVXJBL/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

I bought these

Here's my comprehensive list of what I have added to my 2018 WRX so far:

• OEM Crystal Black Silica Touchup Paint
  J361SAJ000A1 - T/U PAINT CRYSTAL BLACK S - Subaru
  https://www.ebay.com/itm/253360200768
  
• OEM Wind Deflector (9/17/2018)
  Subaru Genuine E3610FJ860 Side Window Deflectors, 1 Pack
  https://www.amazon.com/gp/product/B00U0FG7IE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
  
• Rear Bumper Applique (9/17/2018)
  Genuine Subaru E771SFJ600 Rear Bumper Applique, 1 Packhttps://www.amazon.com/gp/product/B0089E4Q72/ref=od_aui_detailpages00?ie=UTF8&psc=1
  
• High Beam/DRL LED headlight bulbs (9/12/2018)
  Auxbeam 9005 LED Headlights F-S2 Series with 2Pcs 9005 HB3 H10 9145 LED Headlight Bulbs Conversion Kits 72W 8000LM Bridgelux COB Chips Fog Light
  https://www.amazon.com/gp/product/B01KFBPAJO?pf_rd_p=d1f45e03-8b73-4c9a-9beb-4819111bef9a&pf_rd_r=5B9ETM0YME2Q0RAZW9PK&th=1
  
• Cobb AP with MAP 91/93oct Tunes (9/6/2018)
  COBB TUNING ACCESSPORT V3 | 2015-2018 SUBARU WRX/STI (AP3-SUB-004)
  https://www.maperformance.com/products/cobb-tuning-accessport-v3-2015-2018-subaru-wrx-sti-ap3-sub-004
  
• Low Beam LED headlight bulb (9/4/2018)
  H11/H8/H9 LED Headlight Bulbs Conversion Kit, DOT Approved, SEALIGHT S1 Series 12x CSP Chips Low Beam/Fog Light Bulb- 6000LM 6000K Xenon White
  https://www.amazon.com/gp/product/B079KB7QX3/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
  
• Smoked Tail Light Overlay (9/1/2018)
  IAG ROCKBLOCKER SMOKE REVERSE LIGHT OVERLAY FILM KIT | 2015-2018 SUBARU WRX/STI SEDAN (IAG-BDY-2015)
  https://www.maperformance.com/products/iag-rockblocker-smoke-reverse-light-overlay-film-kit-2015-2017-subaru-wrx-sti-iag-bdy-2015
  
• Mirrortap Cord for Uniden RD (7/14/2018)
  MIRRORTAP POWER CORDS MirrorTap MTX-1020, RJ-11, 20" Long, Patented Radar Detector Power Cord With 2 Amp In-Line Fuse, Military Grade Taps, Made in USA
  https://www.amazon.com/gp/product/B00L2SVXQO/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
  
• Mirror Mount for Uniden RD (7/14/2018)
  BlendMount BND-2000R Aluminum Radar Detector Mount for Uniden DFR6/7,LRD950 (EXCEPT R1/R3) - Compatible with Most American and Asian Vehicles - Made in USA - Looks Factory Installed
  https://www.amazon.com/gp/product/B06ZY5FYCC/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
  
• Alloy wheel touch up paint (7/20/2018)
  Subaru alloy wheel paint WRX 2018 Gray
  http://quiktouch.com/eng/product-detail?subaru-alloy-wheel-paint-wrx-2018-gray&id=6295
  
• Towing Warning Sticker (6/22/2018)
  WRX w/ STi wing AWD Tow Warning Decal Sticker adhesive inside mount
  https://www.ebay.com/itm/201251688281
  
• Fuse Box Coin Container (6/20/2018)
  2015 - 2017 / 2018 WRX / STi JDM Subaru genuine coin box pocket fuse cover lid
  https://www.ebay.com/itm/201597032045
  
• 2x Trunk Cargo Hook (6/20/2018)
  OEM 2017-2018 Subaru Impreza Sedan Trunk Cargo Hook Bag Holder NEW F551SFL100
  https://www.ebay.com/itm/OEM-2017-2018-Subaru-Impreza-Sedan-Trunk-Cargo-Hook-Bag-Holder-NEW-F551SFL100/192483488447?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
  
• Wheel Lock Kit (7/24/2018)
  Genuine Subaru B321SFG000 Wheel Lock Kit
  https://www.amazon.com/gp/product/B007CLSJRQ/ref=od_aui_detailpages00?ie=UTF8&psc=1
  
• Rear Fog Light (6/11/2018)
  iJDMTOY Smoked Lens 3-In-1 LED Rear Fog Light Assembly Kit (Tail, Brake, Backup Reverse Light) For 2011-up Subaru Impreza WRX STI (with Wire Harness & Mounting Bracket)
  https://www.amazon.com/gp/product/B01GSVLSUA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
  
• Rear Fog Light Plug & Play Harness (6/11/2018)
  SubieBros Rear Fog Light Plug And Play Harness - Multifunction Style
  http://subiebros.com/subiebros-rear-fog-light-plug-and-play-harness/
  
• LED light replacement (4/30/2018)
  10x White Interior LED Lights Bulb Package Kit For 2015-2017 Subaru WRX STI
  https://www.ebay.com/itm/171646325126
  
• Billetworkz Weighted Shift Knob (4/7/2018)
  Billetworkz Subaru WRX/STI Weighted 500g Gear Shift Knob 6 Speed STI: 2004-Present, WRX: 2015-Present
  https://www.amazon.com/gp/product/B071NJDYTP/ref=oh_aui_detailpage_o01_s00?ie=UTF8&th=1
  
• Perrin Shifter Bushing (3/24/18)
  Perrin 2015 Subaru WRX 5 Speed Stiff Brass Shifter Bushing
  https://www.amazon.com/gp/product/B019D8NQD2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
  
• Perrin Shifter Stop (2/4/18)
  Perrin Subaru 2015 WRX/10-14 Legacy/Outback/14+ Forester Manual Shifter Stop - Black Anodized
  https://www.amazon.com/dp/B019D8RK5W/ref=cm_sw_r_cp_apa_XoDBAbAT15SH5
  
• Rally Armor Mud flaps (1/21/18)
  Rally Armor 15+ Subaru WRX & STi Sedan Only Red Mud Flap w/ White Logo
  https://www.amazon.com/dp/B00RPKG6QA/ref=cm_sw_r_cp_apa_EqDBAbA5TCHJM
  
• K&N Air Filter (12/24/17)
  K&N 33-2304 High Performance Replacement Air Filter for 2003-2017 Subaru 1.5L/1.6L/2.0L/2.5L/3.0L/3.6L
  https://www.amazon.com/dp/B000COC0GQ/ref=cm_sw_r_cp_apa_IsDBAbS3DT7HK
  
• License Plate Frame (1/8/18)
  Black License Plate Frame, Ohuhu 4 Hole Matte Aluminum 2 PCS Slim License Plate Frames with Screws Caps
  https://www.amazon.com/dp/B01MPYE3SB/ref=cm_sw_r_cp_apa_.tDBAb0S850YB
  
• License Plate Bracket Kit (1/8/18)
  https://www.ebay.com/itm/282594278514

i picked these up on prime day for 20 bucks. and they're bright as crap.
https://www.amazon.com/gp/product/B079KB7QX3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Don't tint your headlights. unless you're just talking about the non reflective chrome surfaces. Not the lens.