Best bike suspension products according to redditors

We found 31 Reddit comments discussing the best bike suspension products. We ranked the 23 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Subcategories:

Bike suspension forks
Bike rear shocks
Bike suspension service parts

Top Reddit comments about Bike Suspension Products:

u/singelingtracks · 4 pointsr/MTB

its not normal and the stanchion seals may have come not working. they are cheap to buy and easy to replace.

new seals and foam rings, https://www.amazon.com/RockShox-Seal-revive-Judy-Pilot/dp/B001CJZ6LQ

pop the fork bottoms clean it all up, press in the new seals. give it some new oil. rockshox has amazing manuals for all there forks on the website.

u/Karma_Redeemed · 3 pointsr/aww

Eh maybe for while this guy is a puppy, but bicycle shocks can be easily found for under 1lb. And they aren't particularly expensive

u/rubin1986 · 3 pointsr/MTB

I just put the same fork on my 29er and had to buy the pump. Call your LBS to see if they forgot to include the shock pump. I they don't provide one just get one for 20~30 USD. Most of the brands use the same pump (It might be same supplier). The chart on the leg is a good starting point to adjust it to the desired pressure. I ended up putting 10 more PSI that the recomended level. You would want to adjust the locking system (MILO) if you want some sag or completely locked.

u/Oneinterestingthing · 3 pointsr/ElectricScooters

165mm eye to eye, but the fill valve needs to be in good position as not lot of room (which narrows options)

I had the DMN AO36RC back and its huge improvement, super cushy. Specs here
DNM Damping 3 System Mountain Bike Air Rear Shock Rebound/Lock Out/Air Pressure Adjustable AL 7005 Shark/AL 6061 Shock Body 165mm (6.5") x 35mm https://www.amazon.com/dp/B00FLTZ2ZS

Noticed there is ao38 model...not sure if any better or fits??


In front did finally install one mentioned previously and it barely fits (have to remove upper allen bolt to fill)...have not ridden a lot but feels good, considering installing a bump stop though in case shock de-pressurizes...original install didn’t charge the shock and she sinks pretty good to point could bottom out on tire...at 200 psi though not a problem.

u/Alternative_Program · 2 pointsr/ElectricScooters

> That's a non-issue. You'd want to change the standard Dualtron folding handlebar to Xtasy anyway because it's not that good. Xtasy has way more space for gadgets and better locking mechanism. Dualtron 3 comes with Xtech brakes which suck as well - I know that because I had them on my Spider for a while. Fully hydraulic Magura is what you want - the installation is a pain in the balls, but in the end it's worth it, everyone who did it will confirm that. Thunder comes with Nutt hydraulic brakes, but Magura blows it out of the water.

Honestly, it's almost like you're trying to talk me out of buying another scooter at all. ;-)

> It's not. There's a reason why all Dualtrons (except X, my guess is rubber doesn't scale to it's size well) come with rubber suspension - it's really good. I had my reservations about it before I received my Spider, but 9 months and counting now - the suspension is excellent, like it was made for me.

Have you ridden a Speedway V or similar? I had what looks to be the same (single) rear "A5" shock on my Darknight and it seemed pretty good. Definitely superior to the undampend springs it had on the forks.

> Better build quality

Do you have any specific examples? Same motors, tires and wheels as the D3, same controller as the Spider presumably, same throttle, same brakes as the Spider, better folding mechanism than either of the Dualtrons.

> More maintenance friendly

The Speedway V has the same tires and wheels, with apparently the same motors. The deck looks easy enough to get at. Do you have any specific reasons for saying this?

> Better clearance

I'm mostly worried about scraping the deck over speed bumps in parking lots. At low speed. But that's probably actually a non-issue now that I think about it.

> Better quality batteries - LG or Panasonic cells

It's really not important to me. IF I ever had issues with the pack, which would have to be more defect related than cycle-life, replacing a battery pack really isn't that prohibitive. Two new motors can cost just as much. I've seen people on here claim that the battery is half the price, but that just isn't the case unless you're paying for reseller profits. Hit up Alibaba and look for 16s9p packs. Even LG doesn't hit that mark. The Sincpower batteries are rated for ≥ 1000 cycles at 100% DoD at 0.5C. That's about 56,000 miles (at 25Wh/mi) at a continuous ~700W. If I need to replace a pack to get another couple years out of a scooter that's 1) Easy, and 2) Still cheaper than buying a more expensive scooter.

> More mod friendly and more 3rd party parts available

Besides the $18 handlebar bag I've got, and maybe upgrading the brakes at some point, I'm not really interested.

u/feltchmaster · 2 pointsr/MTB

I just bought it a few months ago from nashbar for $400 shipped. I like it but I also realized going in I would have to buy a new fork at some point and rear suspension. I'm still riding everything stock but I will be upgrading as the current fork is like a pogostick haha. The first upgrade I'm going to do is going to be this shock from Amazon DNM Mountain Bike Air Rear Shock With Lockout 190mm https://www.amazon.com/dp/B00FLTZ47O/ref=cm_sw_r_cp_api_kXbxxbXZ5RDH2 as there are others on there that have already mounted it. Unfortunately on most biking forums and subs everyone prices out cheaper bikes because the components aren't as good stock as bikes that are much higher priced, but since I bought a new bike for $400 I now have much more room to get the bike exactly how I want it. Sometimes you just have to do your own thing and realize what your priorities are.

u/ptucke · 2 pointsr/rollerblading

I use a fox racing shock pump and it works well.

https://www.amazon.com/FOX-High-Pressure-Shock-Pump/dp/B00LXFUB14

u/GreenwoodsUncharted · 2 pointsr/MTB

Good catch! I actually had my eye on this pump, but linked the wrong one. Thanks for pointing that out. I would have been in for a nasty surprise trying to pump the dpx2 up to 225 psi!

https://www.amazon.com/FOX-High-Pressure-Shock-Pump/dp/B00LXFUB14/ref=sr_1_3?ie=UTF8&qid=1549132552&sr=8-3&keywords=fox+shock+pump+300+psi

u/ZombieDO · 1 pointr/MTB

Thanks. I’ll email them.

Is it this one by chance? RockShox Debonair Upgrade Kit - Lyrik/Yari, 180mm - Lyrik B1+/Yari A1+ (2016+), Kit https://www.amazon.com/dp/B07C4J6PPM/ref=cm_sw_r_cp_api_zKV9BbR3QGMG2

u/HotTabascoSauce · 1 pointr/MTB

Are you talking about this?
Where did you find it for $40…?

Edit: you mean this

u/Endlesscube23 · 1 pointr/ebikes

Cirrus Cycles KINEKT 2.1 Aluminum Bike Seatpost with Suspension https://www.amazon.com/dp/B07G54S6VV/ref=cm_sw_r_cp_apa_i_VhjPDb1R4XVPV

u/xblackdemonx · 1 pointr/ebikes

I settled for the SR Suntour NCX SP12 Suspension Seatpost that I got for 99$+7$ ship with no tax.

u/cali8112 · 1 pointr/ebikes

I added a suntour to my Giant Sedona. I do like the thudbuster though.

SR Suntour NCX Suspension... https://www.amazon.com/dp/B06XYPP4JG?ref=ppx_pop_mob_ap_share

A good saddle is just as good of investment as well.

Serfas RX Cruiser Bicycle Saddle https://www.amazon.com/dp/B001MJYG8U?ref=ppx_pop_mob_ap_share

Running this combo so far and no problems.

u/marlospain · 1 pointr/ElectricScooters

You might want to try a "shock pump" on Amazon with a lever lock like this one. I've seen other people on this subreddit suggesting this type of pump since it fits on without needing the adapter hose. The lever lock is supposed to let you detach the pump without losing much air.

But I was able to get away with using the included hose (and yes it is annoying).
You gotta screw in the hose until it seals and then pump the tire quite a bit above the desired pressure (I went to 60 psi and it didn't blow up). Then you pull on the rubber part while unscrewing the end of it (you'll notice that if you push the hose it will cause the valve to start releasing air earlier). After you get the hose off, you'll need to use a gauge to check the pressure and release to the desired level.

u/perturbeaux · 1 pointr/MTB

No worries, I'm glad I could help a little. Also, I don't think it's a bad idea to upgrade the fork on the Guardian frame. About 4-5 years ago, I got a 1st generation Airborne Goblin, which is the same frame used on the Guardian and I think it's a nice, strong frame, is reasonably light, and has good geometry. However, I think $505 is a bit much to invest in that frame. If it were me, I'd get a lesser fork like this: RockShox Recon Silver RL. It's still totally good - it's an air fork, it has a damper (what keeps it from being a pogo stick), and it will fit your bike. It's not as light as a Reba but I think you'll get 90% of the performance. Put that on your bike, ride it until you truly outgrow the bike, while stashing money for your next mountain bike.

u/Ilovehifi · 1 pointr/MTB

I have the SDS dropper on my Honzo and can confirm that it is NOT air adjustable - the other models of DMN droppers are. I actually emailed them directly after I first got mine as I was looking for the valve and the website implied it should have had one - long story short it isn't adjustable.

Anyway, I've been using it for 3 months and so far it's been brilliant and I haven't had any issues or complaints. I got the feeling before I purchased it that it would either be brilliant or fail miserably! I've wondered if having a sealed unit might actually prevent air leaks? If it continues like it has then it's one hell of a bargain. My only gripe is that the trigger is a bit fragile, I taped a small bit of foam to the top of it to protect it in the somewhat likely event of a crash.

Anyway, here is another review - they also comment that it's not adjustable.

u/Cuntrover · 1 pointr/ebikes

What about something like this
FOX Float DRCV CTD Kashima Mountain Bike Shock // 7.25 x 1.875" // Remote Ready https://www.amazon.com/dp/B00OYH102C/ref=cm_sw_r_cp_apa_hkxAybK2TF9RT

u/Give_Me_Cash · 1 pointr/ebikes

Thanks for the great feedback

So, it seems like this Boxxer fork would be a decent choice instead?

They rarely list to year on Amazon, so not sure if this is a recent model :(

https://www.amazon.com/RockShox-Boxxer-26-Inch-Motion-Control/dp/B00JYD7JM6/ref=sr_1_1?ie=UTF8&qid=1485149839&sr=8-1&keywords=rockshox+boxxer

So, looks like stem and bars are good, but I should just consider a shorted stem? Good to know.

I weight 175, combination of street and trail. Rear sus should work out with 550lb.

u/mattjewbear · 1 pointr/mountainbiking

I have the same exact bike, I love it, also new to MTB, first thing I did was swap out that annoying rear suspension. Found this on a DB forum, such a blessing to have the ability to lock out the rear suspension on the fly:

DNM Mountain Bike Air Rear Shock with Lockout 190mm https://www.amazon.com/dp/B00FLTZ47O/ref=cm_sw_r_cp_api_i_QHbDDbBT1DA4T

u/j-mazing · 1 pointr/MTB

It's good. Holds air. Rebounds fine. I think a seal kit is $20 if it needs to be rebuilt at some point. Then again, there is always a cheap RockShox Monarch or this as a replacement: http://www.amazon.com/DNM-Mountain-Shock-Lockout-165mm/dp/B00FLTZ2ZS/ref=sr_1_2?ie=UTF8&qid=1462824847&sr=8-2&keywords=rear+shock

u/andrewcooke · 1 pointr/MTB

update: don't know if this is you model, but this seems to be the "middle size" kit i am talking about. it contains the rings and dust seals for the lowers, new washers, and new rings and guides for the pistons in the air spring and damper.

if it's like my sid solo air then the thicker lube oil goes in the lowers. thinner damping oil goes in the damper. grease on most of the seals (particularly the air spring). but the other answer says something different so maybe the revelation is different somehow.

u/kor56 · 1 pointr/metalworking

I was making something vaguely similar, and I decided to go with el cheapo bike shocks. Might work for your application.

u/dontpanic15 · 1 pointr/bikewrench

Should I get new seals? I think I found the service kit on amazon.
Or should I open it up first and look at the seals? I doubt this fork has ever been serviced before.

Plus 5wt oil for the dampener and 15wt for the fork lower it looks like.

service kit
https://www.amazon.com/gp/product/B003UW5E8S/ref=ox_sc_act_title_2?smid=A2TE9IQP68MWQU&psc=1

seal kit
https://www.amazon.com/gp/product/B001CJZ6LQ/ref=ox_sc_act_title_1?smid=A2TE9IQP68MWQU&psc=1

u/ChristophColombo · 1 pointr/MTB

No, they're a proprietary part. This kit should do the trick. You'll also need to look up the oil volume and get some replacement oil as well as suspension grease (I like Slick Honey).

u/clh_92 · -2 pointsr/MTB

DNM Coil Rear Shock Mountain Downhill Bike Suspension Part 550lbs 190mm×51mm https://www.amazon.com/dp/B00LM3FPMC/ref=cm_sw_r_cp_apa_Xi64BbA7TY3KR
I've used dmn shocks on all my bikes