Best cell phone holsters according to redditors

Exact, exemple de ce produit en vente sur Amazon. Maintenant pourquoi sur une boîte aux lettres ? Il y en a souvent dans les immeubles de bureaux pour que les gardiens de nuit les scannent pendant leur rondes. Si OP habite dans un immeuble avec un vigile c'est peut-être ça ?

Sure. The parts I used (I removed my affiliate links)

1. Topmate 10,000 mah battery pack. https://www.amazon.com/gp/product/B07F82WP4Q/
   
2. Holster with two clips. https://www.amazon.com/gp/product/B07N2PZ4ZP/
   
3. Right angle USB adapters https://www.amazon.com/gp/product/B078YRKTKM/
   
4. Short USB C to USB C cable. https://www.amazon.com/gp/product/B072M7GH29/
   
5. This case can fit the Quest with these accessories. https://www.amazon.com/gp/product/B01N6N3J8D/
   
   More info: http://360rumors.com/oculus-quest-battery-pack-extends-battery-life-improves-comfort/

What?! I've never even remotely had that issue with the 10.

That said, change your life:
https://www.amazon.com/dp/B00R458WE0/ref=cm_sw_r_cp_apa_i_7Dc2Db3149HJV

Yeah, those plastic things from the company are lousy.
I've been using this for a few years: http://www.amazon.com/Nite-Ize-NBC-03-11-Belt-Clip/dp/B007CBSBM4/ref=pd_sim_sbs_misc_3?ie=UTF8&refRID=169AJSP5XEGBGE0MJ2WQ It's way less bulky and I never have to worry about it breaking.

i just use these

That's not an accessories list.. This is an accessories list:

​

Lens Spacer:

https://www.etsy.com/listing/702931500/oculus-quest-rift-s-lens-protector?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=oculus+quest&ref=sr_gallery-1-5&organic_search_click=1&col=1

​

Anker Battery Pack:

https://www.amazon.com/gp/product/B07HBTY3Z2/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

​

Case for Battery pack:

https://www.amazon.com/gp/product/B075H2MQHF/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

​

Easy Magnetic Charging Cables:

https://www.amazon.com/gp/product/B07R7SGSYD/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

Extra Lens Cloths:

https://www.amazon.com/gp/product/B0050R67U0/ref=ppx_yo_dt_b_asin_image_o05_s00?ie=UTF8&psc=1

Controller grips:

https://www.mamutvr.com/products/mamut-touch-grip

​

Headstrap:

https://www.amazon.com/boomprospect-Headband-Auxiliary-Breathable-Comfortable/dp/B07TMZ6KVG/ref=sr_1_19?keywords=oculus+quest+strap&qid=1562165011&s=gateway&sr=8-19

​

Also VRCover (Still waiting on something fluffier):

https://vrcover.com/oculus-quest-accessories/

Nite Ize HipClip - Attachable Pocket Clip For Smartphones https://www.amazon.com/dp/B007CBSBM4/ref=cm_sw_r_cp_api_i_hCrPCb9J6P6A3

Just ordered this and planning to stick it right on the case. Lots of reviews from pumpers.

I am a crazy case person.

Here are a couple in the running, I will more than likely buy all.

• Spigen Tough Armor Credit Card Case
  
• OtterBox Symmetry Series Case
  
• SUPCASE Unicorn Beetle Series Premium Hybrid Protective Clear Case
  
• SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector
  
• Apple Leather Case - Black
  
• OtterBox Statement Series Case for iPhone 7 Plus
  
  
  

It might be easier for him to find a cell phone clip or something in the future when it's hard to find one specific thing.

Something like this works well clipping to clothing but not a wheelchair

Samsung Galaxy S9+ Plus Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Galaxy S9+ Plus (2018 Release), Unicorn Beetle PRO Series - Retail Package (Black) https://www.amazon.com/dp/B079BS4ZQ4/ref=cm_sw_r_cp_apa_PMCVAbQAJMY9Z

I use one of these on my phone hanging inside my pocket for about a year I think. It hasn't failed me yet and i love it. When I wanted to relocate it on the phone I used some ultra super special 3M double sided tape from Homey Depot. http://www.amazon.com/gp/aw/d/B007CBSBM4/ref=mp_s_a_1_1?qid=1415913862&sr=8-1&pi=SY200_QL40

I use one of these clips. Works great.

I like the cases that have portrait stand. When I sit at a table I can stand it upright and surf while I eat, I can also lay it down landscape for videos but usually I am checking out reddit at lunch

Added Link

This is the one I bought and love it's built to last.

Galaxy S7 Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Samsung Galaxy S7 (2016 Release), Unicorn Beetle PRO Series - Retail Package (Black/Black) https://www.amazon.com/dp/B01BLEWFGK/ref=cm_sw_r_cp_apa_5rQIyb99R6TCT

I never drop my phones but if I do I wouldn't worry much with this case.

Here is my terrible drawing of what I'm looking for

The knife engages when it hooks on the inside of the pocket and pivots outwards.

Youtube video of the mechanism in action

This is a similar "bag" from amazon

The amazon bag doesn't look very durable and it looks very "Tacti-cool" I want something that could hook onto the waistband of my pants and have a loop that I can secure it around my leg so it doesn't move around.

This one covers the port (and the screen):

https://www.amazon.com/SUPCASE-Full-body-Holster-Protector-Release/dp/B074XGX1TY/ref=sr_1_1?s=wireless&ie=UTF8&qid=1519416318&sr=1-1&keywords=supcase+V30

Could try one of these https://www.amazon.com/dp/B007CBSBM4/ref=cm_sw_r_cp_api_57-VBbG372MY3

Urvoix(TM) Black Army Camo Molle... https://www.amazon.com/dp/B00MNMT78Y?ref=ppx_pop_mob_ap_share

Disliked my Otterbox, got this instead, I love it, never going back to Otterbox.

Galaxy S7 Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Samsung Galaxy S7 (2016 Release), Unicorn Beetle PRO Series - https://www.amazon.com/dp/B01BLEWFGK/ref=cm_sw_r_cp_apap_LgALMAQ4oXPZu

Bought one. Nite-Ize stick on. Been holding up great

Nite Ize HipClip - Attachable Pocket Clip For Smartphones https://www.amazon.com/dp/B007CBSBM4/ref=cm_sw_r_cp_api_i_es1VCbC24QRM0

Yes! Tandem is awesome. If your cost for G6 is low, switch over. It's awesome to have CGM data right on the pump. I have 3 suggestions for you.

1. Take the clip it comes with out and stick this one on the case (not directly on the pump): Nite Ize HipClip - Attachable Pocket Clip For Smartphones https://www.amazon.com/dp/B007CBSBM4/ref=cm_sw_r_cp_apa_i_muRLDbE56430R
   
   
2. Get long tubing. I used the shorter tubing for years before realizing how much easier long tubing is! I have more flexibility when I sleep, go to the bathroom, etc.
   
   
3. Be careful with the touchscreen. After almost a year with this pump, I accidentally pressed the buttons just right when putting it in/taking it out of my pocket and accidentally stopped my sensor. That was super frustrating and highly unusual.
   
   You will love it! Good luck!

Best to leave it alone haha.

The phone is so beautiful and a joy to hold, but after this, I bought a case to cover up the nick/chip/scruff. It became a tank but I love it more. With this frame + my case, it's pretty much unbend-able!

My case is a Supcase Pro if you are wondering.

This looks like it may fit the bill for general purpose.

While this is MOLLE, it looks like a fairly innocuous and relatively classy sturdy glasses case.

I know it's not super slim, but this is a really nice case I just picked up and it has excellent screen and side protection.

Case 1

Also got this one the exact same time and LOVE it for when I don't need as much protection and want to show off the pretty gold back.

Case 2

The thicker one is only a tiny bit thicker, but gives a better overall protection.

Yeah, I like having it in my hand too. Belts and armbands are uncomfortable and I like being able to peek at my run tracking app or mess with my music. I don't really like having to grip it and I worry about dropping it so I use one of these. Works perfectly. I also have a water bottle for long runs.

The Unicorn Beetle by Supcase always gets great reviews and is probably the closest alternative to an Otter Box, and also more aesthetically pleasing, IMO. My bf had it on his G4 when he had it, and it did a great job protecting it and wasn't too cumbersome; I would say definitely less than an otterbox.

Picked up a promotional Victorinox Spartan and attached a Nite-Ize adhesive belt/pocket clip. One of my biggest gripes with SAKs is that they tend to fall to the bottom of my pocket. This mod keeps the knife in place throughout the day. It also hides the random company logo on the reverse side.

Edit: Here's the link for the clip http://amzn.com/B007CBSBM4

I use this. I've had it on since early May and it shows absolutely no signs of coming loose. My pump now has a few scratches on the back of it from being sans case... but I literally could not care any less about that.

Closest I've found so far is this:
https://www.amazon.com/TFY-Security-Hand-strap-Samsung-Smartphones/dp/B00R458WE0

Which is the strap and two 'brackets'...but no idea where to get just the brackets

Boom. Found it

I like the Unicorn Beetle. I had one for my LG G3. It fits nicely and keeps it thin. So far I have dropeed my S7 a few times and I dont even see a scratch since the edues are rubber.
http://www.amazon.com/SUPCASE-Full-body-Holster-Protector-Samsung/dp/B01BLEWFGK/ref=sr_1_3?s=wireless&ie=UTF8&qid=1464990805&sr=1-3&keywords=s7+case+beetle

copied from my earlier comment

Like this.


The two parts are held together with VHB tape. More than strong enough.

The clips is a Nite Ize universal smartphone clip which comes with a strip of VHB.

The rest is pretty obvious.

EDIT: I bought a clear VHB, for other uses. For this, I think a softer, foam core VHB might work better. The edges aren't flat, and don't rest flat against each other. It still works tho.

The pocket clip is a Nite Ize Hipclip and I used Double Sided Gorilla Tape to stick the two halves of the bit kit together.

SUPCASE has a Unicorn Beetle model for less than $20. It's a highly protective belt clip case just like the Defender.

I used to swear by OtterBox but this case is far slimmer and uses a hardened plastic and rubber instead of a rubber sleeve that for some phone models is rather loose (LG G6 & Galaxy S7 from experience)

It comes with a built in screen protector. It has port covers. I've had many drops and the phone remains unscratched and safe. Since the case is hard plastic and rubber it doesn't wear or peel like the OB rubber sleeve.

Now. Take note. I'm not saying OB isn't good but for the money. I feel UB is just as good, if not, identical in safety and longevity. I'm not sure if it has a lifetime warranty. The belt clip is sturdy as balls and has held up just as well as the case. What's nice is that the case is slim enough to carry around without the belt clip if you don't want a bulky feel.

https://www.amazon.com/dp/B01KK86QW2/ref=cm_sw_r_sms_apa_i_gkQzCbE1R7J8E

i got this one i like it alot doesnt make my phone bulky https://www.amazon.com/dp/B01BLEWFGK/ref=cm_sw_r_other_awd_bja9wbZHPZRBC

I've been looking for something similar to use for backpacking. I want quick access to the phone (so mounted on the shoulder strap most likely), want it protected from branches, light rain, etc. I don't want it flapping around, coming off the strap due to a button or velcro type mounting, and probably a clip of some sort to keep the pouch flap locked down.

I'm looking at cases/pouches like this, or this but I need to ascertain sizes before ordering and I'm not sold on the fastening straps/button thing.

The belt/strap loop options on this one are good.

Right, and that's where the $20 screen replacement deductible comes in.

If you drop you phone and the screen cracks, ubreakifix will repair it for $20. That's a risk I'm willing to take compared to dumping $40-$50 on a screen protector that just seems to eventually fail.

That's the reason why I went with it. I've gone through every decent screen protector for the Note 8 and every one of them failed in some way.

Whitestone is the one that ticked me off the most since they refused to honor their warranty and never responded to my emails when I asked them what I need to do to get a replacement.

I spent 40 minutes at a Zagg store nearby where I live just to have 4 different Elites fail to stick in the bottom right corner of my phone.

If you do go with a Whitestone again, the Unicorn Beetle case is compatible with it after removing the plastic protector (it just pops right out).

Bomea iPhone 8 6 6S iPhone 7 Leather Case Holster Belt Case with Clip/Loops Belt Pouch Holder For Apple iPhone 6 6S 7 8 Phone With a Slim Hard Case on - Built in ID Card Slot - Black https://www.amazon.com/dp/B01H2JJ58Y/ref=cm_sw_r_cp_api_i_ifb7CbJJTDCHB

right, so im looking at this one right here. Its either this one or the moko one since i need to have a belt holster type deal since i sit in really tight desks at school, and being a big guy i am prone to hitting the phone on the underside of the desks when it is in my pocket.

You want to search for a cell phone holster or a cell phone hip clip.

A lot of them require a belt, but some don't. This one doesn't, but it only attaches with adhesive so I don't know how strong it is.

I used a SupCase for my iPhone. The back isn’t completely flat but it didnt matter to me since I was kit bashing it. I did like the grooves around the edges to help go with it. Also, the belt clips helps keep your datapad easily accessible compared to in the pocket or bag where pieces can break off.

I have this one currently and I really enjoy it. Just as good as the OtterBox options and much cheaper price.

Also happy to help out here if needed - my wife also uses an insulin pump (different design) and I made a snap-on cover for hers.

In the case of this particular pump, and particularly given how it's being worn, have you considered a small leather pouch for it? Even though I can 3D print, I would be inclined towards the pouch concept just because it will be naturally more resistant to "banging around". I found a number of possibilities on Amazon - some designed for pumps but anything about that size with an opening for the tube should work (and it would be easy enough to modify the leather to add an opening if it didn't have one).

Here's one example I found - small but roomy enough that extra padding could be added:

https://www.amazon.com/dp/B075H2MQHF

I ordered the i-BLASON Magma Series for the Note 8. Built-in screen protector, snap-on to included belt clip holster.

https://www.amazon.com/gp/product/B074W3WBVC

It was either that or the SUPCASE from Unicorn Beetle, both same price.

https://www.amazon.com/Samsung-SUPCASE-Full-body-Protector-Black/dp/B074W2MC7L

[I got this case for regular use] (http://www.amazon.com/Nexus-Case-Spigen-Armor-Google/dp/B00OH4I2IC/ref=sr_1_4?ie=UTF8&qid=1420214021&sr=8-4&keywords=nexus+6+cases)

[And this case when I go to work (Red)] (http://www.amazon.com/i-Blason-Kickstand-Release-Holster-Motorola/dp/B00OGXQ3LC/ref=sr_1_35?ie=UTF8&qid=1420214050&sr=8-35&keywords=nexus+6+cases)

you know it. i put this on a wood scale swisschamp. my favorite and definitely the most beautiful item i've ever owned

i-Blason Google Nexus 5 Smart Phone by LG Prime Series Dual Layer Holster Case with Kickstand and Locking Belt Swivel Clip (Black).

It's a rubber case on your phone, then another hard frame over that. It's really nice and has a stand and clip.

It's the Nite Ize Hip Clip

$2 on amazon. http://www.amazon.com/gp/product/B00E4RV8DS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I bought this one, http://www.amazon.com/gp/aw/d/B00E4RV8DS/ref=mp_s_a_1_3?qid=1416357238&sr=8-3&pi=AC_SY200_QL40

I rock the belt clip as well.

So far it holds up great! As long as you follow the instructions to ensure a strong bond, the clip should hold up with regular use. The clip itself was purchased on Amazon. It's called Nite Ize Hipclip.

https://www.amazon.com/gp/aw/d/B007CBSBM4?psc=1&ref=yo_pop_mb_pd_title

If it's anything like the MoKo case: http://www.amazon.com/gp/product/B00E4RV8DS/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

It's got a really, really flimsy TPU case part. I doubt it would protect much, even though it adds on a ton of bulk.

At that price, I think you'd be better off looking at the Rearth or Spigen cases (I love my Thin Armor).

I'm wearing warm gloves, and use a stylus, plus I'll be getting this hand strap
https://www.amazon.com/gp/aw/d/B00R458WE0/ref=mp_s_a_1_1?ie=UTF8&qid=1480300059&sr=8-1&pi=SY200_QL40&keywords=Smartphone+hand+strap&dpPl=1&dpID=41z011MUthL&ref=plSrch

I tried several different things and I finally settled on this I wear it on my hip belt, it's large enough for an iphone 8 plus, it's really durable (for when I forget about it and drop my pack down hard), and it doesn't flop around or hit my stomach weridly. Someone in the commetns said they modified it for the shoulder strap, which was my original plan, but since I didn't hate it on the waist belt, I never bothered with that.

://www.amazon.com/gp/aw/d/B074W2MC7L/ref=mp_s_a_1_13?ie=UTF8&qid=1505706584&sr=8-13&pi=AC_SX236_SY340_QL65&keywords=galaxy+note+8+case

That is a pretty good case that I have used. I dropped my phone quiete a few times with that and nothing happened to my phone. The only thing is that it doesn't fully cover the front of the phone. Plus it's only about $20.


https://www.t-mobile.com/accessory/samsung-galaxy-note8-protective-standing-cover-black

This is the case that I am currently using. It's a bit pricy at $40 but so far I absolutely love it and especially the stand in the back of the case for when I watch my movies. The only problem I have with this case is that when I drive and want to plug in my wire to my phone to listen to music it doesn't fit because of the cover. Maybe my wire cord tip just is old and not big enough.

Those are the two I would recommend, haven't tried any other cases.

2 options. First is to get a holster with a card slot which is what I currently have. Bulky, but works great.

iPhone 8 Case, iPhone 6 6S iPhone 7 Case, Bomea [Premium Leather] Holster Belt Case with Clip/Loops Belt Pouch Holder For iPhone 6 6S 7 8 Phone With A Slim Hard Case On - Built In ID Card Slot - Black https://www.amazon.com/dp/B01H2JJ58Y/ref=cm_sw_r_cp_apa_YEJHAb926RMZF

Second is to get any case and holster combo, and stick a card holder on the inside of the holster. In any holster with "arms" that the phone clips into there is enough space for this to work well.

Card Holder, Sinjimoru Stick-on Wallet functioning as iPhone Wallet Case, iPhone case with a card holder, Credit Card Wallet, Card Case and Money Clip. For Android, too. Sinji Pouch Basic 2, Black https://www.amazon.com/dp/B00HY3HSZQ/ref=cm_sw_r_cp_apa_9GJHAb6SRJYY8

The Supcase Unicorn Beetle will do that with its plastic integrated screen shield that performs better in impacts than any those glass screen "protectors". I have only used the Unicorn Beetle cases since the Galaxy S8. Now on my GS9+. It's also reasonably priced. By the way, the case looks exactly like the renderings in Amazon. High-quality build and materials.

for GS9

https://www.amazon.com/Samsung-SUPCASE-Full-Body-Holster-Protector/dp/B079BPG7CC/ref=sr_1_1_sspa?crid=Y1BBF57ZCDW3&keywords=unicorn+beetle+s9&qid=1562873762&s=gateway&sprefix=unicorn+beetle%2Caps%2C176&sr=8-1-spons&psc=1

for GS9+

https://www.amazon.com/Samsung-SUPCASE-Full-Body-Holster-Protector/dp/B079BS4ZQ4/ref=sr_1_5?crid=Y1BBF57ZCDW3&keywords=unicorn+beetle+s9&qid=1562873839&s=gateway&sprefix=unicorn+beetle%2Caps%2C176&sr=8-5

I don't have a car one, but I use this charger:
http://www.amazon.com/Wireless-Charger-Spigen%C2%AE-Charging-Premium/dp/B00UGIA0WY/

and this case:
http://www.amazon.com/i-Blason-Cell-Phone-Nexus-Google/dp/B00OGXQ3LC/

The wireless charging works great. Some of the pads I used in the past you have to position just right for it to work. However with this one I am using now, I just set it on there and it works. The phone does get pretty hot, but it charges fine. Keep in mind that it is slower than charging via cable.

You do need to use a 2A charger brick with it though. It needs that extra power.

I also keep it in my hand, but I have one of these too which keeps it a bit more secure:

https://www.amazon.com/TFY-Security-Hand-strap-Samsung-Smartphones/dp/B00R458WE0

One of these on the shoulder strap over the chest strap, where the Osprey logo is.

https://www.amazon.co.uk/dp/B00MNMT78Y/ref=cm_sw_r_cp_apa_i_qHAwDbD35S29X

i-Blason Dual Layer with a kickstand and holster:

https://www.amazon.com/i-BlasonDual-Kickstand-Release-Holster-Motorola/dp/B00OGXQ3LC/ref=sr_1_2?ie=UTF8&qid=1511506419&sr=8-2&keywords=i-blason+nexus+6

This thing has protected so many drops from 3+ feet onto concrete, tarmac and tile, that I just take for granted my Nexus 6 will never break from a fall or even moderate throw.

I bought this case for my phone and I like it alot , good back protection and built in screen protector. Only thing is it makes typing more difficult, only slightly




https://www.amazon.com/dp/B074W2MC7L?ref=yo_pop_ma_swf

I ordered this for my edge,

https://www.amazon.com/dp/B00R458WE0/ref=cm_sw_r_other_apa_4lknxbFXXPEME

it does block the flash, but no camera obstruction (depending how you put it on)

I went with the anker slim 10000, for a very specific reason, it's the size of a phone. So I also bought a phone belt clip holster. Clips right on the back strap, for easy on and off, no setup or crafting needed, hehe.

Then just a 1 foot usb-c cable and any angle adaptors you would want. The only downside is the anker slim doesn't output through it's usb-c port, that's only for input. There are lesser quality brands that do have that option in a slim battery if you would rather stick with usb-c the whole way. So since I really wanted to stick with the anker, And I couldn't find a decent 1 foot USB A to USB-c cord, I ended up also having to get an adaptor for that, hehe.

So my total parts list ended up being:

https://www.amazon.ca/gp/product/B079RC1MNV couldn't find that one on the US amazon. Might just mean there wasn't any that would ship to Canada or something.

https://www.amazon.com/gp/product/B07N2PZ4ZP battery fits perfectly in there

https://www.amazon.com/gp/product/B078YRKTKM These are the angles I went with, the flat 90 for the battery side and the sideways 90 for the headset side, pointing down

https://www.amazon.com/gp/product/B072M7GH29 The cables specs are way more than needed, but for that price it's not like we're splurging

https://www.amazon.com/Elebase-Upgraded-Connector-Chargers-Interface/dp/B07LF72431 These aren't the exact ones I went with, but only cuz they didn't exist when I was looking. I would have bought these if they did.

Supcase unicorn beetle. Very happy with it amazon link

Clear and slim. Not bulky and has good drop protection. And it has a cool little kickstand.

• Galaxy S7 Case, OBLIQ [NaKED SHIELD][Clear][Metal Kickstand] Slim Fit Crystal Clear Scratch Resist Heavy Duty Protection Dual Layer Case for Samsung Galaxy S7 Edge https://www.amazon.com/dp/B01BAUMVLO/ref=cm_sw_r_cp_apa_p1FBxbN4009BG
  
  Or if you want some serious but cheap protection, I'd recommend
  
  
• Galaxy S7 Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Samsung Galaxy S7 (2016 Release), Unicorn Beetle PRO Series - Retail Package (Black/Black) https://www.amazon.com/dp/B01BLEWFGK/ref=cm_sw_r_cp_apa_w3FBxbQ029Y19

The best imo.

https://www.amazon.co.uk/SUPCASE-Full-body-Holster-Protector-Samsung/dp/B01BLEWFGK/ref=sr_1_1?ie=UTF8&qid=1466447523&sr=8-1&keywords=beetle+pro+s7

I got the s7 edge version for my phone. Works great with my "Turbot 3 coil qi wireless charger"


https://www.amazon.com/dp/B01BLEWFGK/ref=cm_sw_r_other_apa_dUc3xbJ4HE58N

Have had one of these since the 6 came out. Was meant as a stop-gap until the otter box was available, but it was so good I stuck with it.

Been using an iBlason since I got it. Never dropped so I can't say how effective it is. Has a raised rubber lip around the edges which makes reaching the edge of the screen difficult at times but it's easy to grip I can set it face down on a surface and not have it slide around.

I am seconding this. I use it with a nillken glass protector and I have had no issues with it. I wish I would of paid 9 bux instead of 25 locally.

Note: a hundred different companies make this exact case.

http://www.amazon.com/i-Blason-Google-Holster-Kickstand-Locking/dp/B00FORK3SI/ref=sr_1_22/178-0356590-3367061?ie=UTF8&qid=1405638585&sr=8-22&keywords=nexus+5+case

i would get a phone pouch or a hard case and then just run the wires out and i'd open it when i need to access the switches. but otherwise it'd just sit in the pouch,

I'm currently using this case: https://www.amazon.ca/SUPCASE-Full-body-Holster-Protector-Samsung/dp/B01BLEWFGK/ref=sr_1_1?keywords=unicorn+beetle+s7+case&qid=1569097223&s=gateway&sr=8-1

It works quite well for protecting from falls and stuff. The biggest drawback I have with it, is that the area around the home button collects dirt and whatnot between the screen and the screen protector. Otherwise, I find it to be durable and doesn't add as much bulk as something like an Otterbox Defender.

I picked up this case and I love it. https://www.amazon.ca/dp/B01BLEWFGK/ref=cm_sw_r_cp_apa_cGtkzbB8B73YM

How big exactly is the Gerber Diesel as Buixer mentioned the Nite Ize Pocket Clip might work http://www.amazon.com/Nite-Ize-NBC-03-11-Belt-Clip/dp/B007CBSBM4/ref=sr_1_1?ie=UTF8&qid=1416910414&sr=8-1&keywords=nite+ize+pocket+clip or http://www.amazon.com/Nite-Ize-Total-Eclipse-Belt/dp/B00HUV8FWW/ref=pd_bxgy_cps_text_y Is there any reason something like this wouldn't work for you? http://www.amazon.com/Victorinox-Leather-Large-Pouches-33256/dp/B000HJKT9Q/ref=sr_1_33?ie=UTF8&qid=1416911387&sr=8-33&keywords=Leather+clip+on+Sheath

I had the Neo Hybrid Gunmetal delivered yesterday. I like it, not bulky at all.
http://www.amazon.com/Nexus-Spigen-Hybrid-Series-Google/dp/B00OH4HOOA/ref=sr_1_1?ie=UTF8&qid=1416582754&sr=8-1&keywords=nexus+6+neo+hybrid




I also ordered a Moko for $1.95 shipped (sold out quick). Will use it for when I'm doing outdoor stuff.
http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS/ref=sr_1_1?ie=UTF8&qid=1416582685&sr=8-1&keywords=moko+nexus+6


https://www.youtube.com/watch?v=00QreP9p18k

I have grabbed two cases. The Moko Kickstand case - 1.95 shipped with Amazon Prime. Perhaps not the greatest, but it is better than nothing. It is already available so I can get it before I get my phone. So if nothing else it should hold me over until I can get the case I really wanted. Only $2 wasted. Perhaps I will like it.

I also ordered the Ringke Slim case which I am unsure if it will make it here before my phone. I am thinking this is going to be my main case, slim, simple and I like that it has the dimple on the back. I also like that all the buttons and ports are open and easy to get to. I have had cases that didn't push the buttons properly, or had dust flaps for ports that just kind of annoyed me over time. Also, a free screen protector as well.

I don't like to spend a lot on a case, I am a simple guy. I am using it more for grip (LG G2 is very slippery out of a case for example) + not gunking the device up more than making my device into a bulletproof tank. The Nexus 5 I look at it wrong and it has fingerprint smudges on the back.

I’ve been using this since getting my pump a month ago and it’s worked great so far.

https://www.amazon.com/Nite-Ize-HipClip-Attachable-Smartphones/dp/B007CBSBM4

This is a pretty good looking and safe case to have for the 6.
http://www.amazon.com/dp/B00MOOF4D8/ref=cm_sw_r_udp_awd_9-Cnub0SX63F6

Also the tough armor case is pretty good too by spigen
http://www.amazon.com/dp/B00LL60JU8/ref=cm_sw_r_udp_awd_IaDnub16XNRF6

How about this adhesive belt clip for cell phones:

https://www.amazon.com/dp/B007CBSBM4/ref=cm_sw_r_cp_dp_T1_9UArzbKT3JP5K

Edit: I just ordered it. I'll let you know how it works out in a week if you all remind me.

I have a rugged case with integral screen protector which I use for work.

Minimal finger sensitivity impact, zero pen impact, and my phone is fully protected.

Best part is, at the end of the day I can pop it out and enjoy a naked 8.

LINK

https://www.amazon.com/Premium-Canvas-Holster-Horizontal-Magnetic/dp/B07CR9D5BJ/ref=sr_1_89?s=wireless&ie=UTF8&qid=1542160442&sr=1-89&keywords=horizontal+Phone+Pouch

​

https://www.amazon.com/aubaddy-Horizontal-Nylon-Holster-iPhone/dp/B018KAYQBK/ref=sr_1_98?s=wireless&ie=UTF8&qid=1542160442&sr=1-98&keywords=horizontal+Phone+Pouch

​

https://www.amazon.com/miadore-Horizontal-Holster-Magnetic-Elastic/dp/B07CC9RBFS/ref=sr_1_49?ie=UTF8&qid=1542160759&sr=8-49&keywords=horizontal+Pouch

​

https://www.amazon.com/Evocel-Tactical-Carrier-Holster-Galaxy/dp/B07BHZNBVD/ref=sr_1_56?ie=UTF8&qid=1542160802&sr=8-56&keywords=horizontal+Pouch

​

https://www.amazon.com/AIScell-6s-Rugged-Case-Fits-Protective-6-00x3-00x0-80/dp/B079WJJ8GQ/ref=sr_1_110?ie=UTF8&qid=1542160872&sr=8-110&keywords=horizontal+Pouch

​

Maybe you'd get it way cheaper in swap-meet, like those cell phone stands.

but yee, get some rectangular metal buttons on it, it should look just like the pouch.

Have fun, give us some pics maybe :)

​

I used to have a Crater c33T. I wasn't too impressed by the construction of it, but that was 10 years ago, and they may have improved.

If I was looking for a knife-based multitool, I'd either go with the Victorinox One-Hand Trekker or wait for the Leatherman FREE K series.

https://www.amazon.com/Victorinox-One-Hand-Trekker-Multi-Tool-Pocket/dp/B078GLWN79

https://www.leatherman.com/free-collection?prefn1=tooltype&expanded=tooltype&prefv1=Knife

(If you go with the Victorinox, this works great as a pocket clip: https://www.amazon.com/Nite-Ize-HipClip-Attachable-Smartphones/dp/B007CBSBM4

everything is very pieced together. the treat bag i currently use is the center piece from this tactical belt set, it's a nice small size and the flap is very easy to open/close with one hand. i don't even know what brand my running belt is, it's just a super simple single-pouch elastic belt.

for the bigger setup, i just wear one of my normal leather belts because the running belt is so thin and stretchy. this is the zippered pouch i've been using. i have a small water bottle similar to this that clips onto my belt, found at marshalls for $5.

i bought this belt recently but haven't used it yet. this one will probably become my all-around dog walking belt though.

I've been using this iPhone 6 Case from SUPCASE. It's a has a Full-body Rugged Hybrid Protective Cover with Built-in Dual Layer Design + Impact Resistant Bumper. It come with a belt clip incase your into that, but for me it's slim, super protective, and has a great feel to it.

https://www.amazon.com/dp/B00MOOF4D8/ref=cm_sw_r_awd_1aqtub1VVHY58

https://www.amazon.com/dp/B00MOOF4D8/ref=cm_sw_r_cp_awd_F9V3wbYM24GJ8

This might be what you're looking for. Really good case. Durable and rugged. I really like it.

I have this case: link

Can't beat $19.97 with prime shipping. I had an OtterBox and liked it, but they're pricey and cases inevitably wear out or crack, so I tried this one years ago. I used to do construction siding and once dropped my phone from a third story onto gravel. The case broke but the phone lived so I've been buying this case for every model since the iPhone 6.

It comes with a built in plastic screen protector. I use the tempered glass underneath the case and the plastic makes air bubbles over the glass and gets scratched overtime. To remedy this, I popped the plastic out of the case and cleaned the glue residue off with a sharp utility knife.

I got this from Amazon on another persons recommendation

Nite Ize NBC-03-11 Hip/Belt Clip - Retail Packaging - Silver

https://www.amazon.com/Nite-Ize-HipClip-Attachable-Smartphones/dp/B007CBSBM4

here's what it looks like

I called Tandem today and asked the nice lady I spoke with if they would send me a new one but she said they don't sell the clips separately and that they wouldn't send me a one for free. She did say several times that she was documenting this and would send the report to the QA team. Lastly she said that she could send me an Amazon link to replacement clip that cost about $6 that other t:case users have said works well. I've ordered that but it'll take a week to get here...

http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS

I have iPhone X .
These tags work fine

GoToTags Heavy Duty On-Metal NFC... https://www.amazon.com/dp/B015EM34WY?ref=ppx_pop_mob_ap_share

Urvoix Black Army Camo Molle Bag for Mobile Phone Belt Pouch Holster Cover Case Size L https://www.amazon.com/dp/B00MNMT78Y/ref=cm_sw_r_cp_api_i_yalODbEDWKGKA


https://ibb.co/dj5ZvMV

I've used Encased cases (a relatively new brand) and not had any problems with wireless charging: Galaxy Note 8 Belt Clip Case, Encased Slim Fit Holster Shell Combo (w/ Rubberized Grip Finish) Black https://www.amazon.com/dp/B074TTHD8B/ref=cm_sw_r_cp_apa_G0vPzbC3S2KQY

I like holsters, so it's perfect for me. But it's a good slim case and pretty cheap even if you throw the holster away.

There are lots of options for the supcases here is the one im talking about it also comes with the built-in screen protector

Samsung Galaxy S9+ Plus Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Galaxy S9+ Plus (2018 Release), Unicorn Beetle PRO Series - Retail Package (Black) https://www.amazon.com/dp/B079BS4ZQ4/ref=cm_sw_r_cp_apa_-B.NAbYZ3K6PH

I actually found this
https://www.amazon.com/Nite-Ize-NBC-03-11-Belt-Clip/dp/B007CBSBM4

Yeah it's made for eletronics but the Wingman isn't very heavy and even if it doesn't work I'm only out $9

I have a Galaxy Note10+, with the "Encased" Belt Clip Case, and I bought the Nite Ize HipClip. The fit should be similar to most "Shell Holster Combo" type cases of similar design. This clip fits perfectly on the top section of the kick stand. It allows my phone to suspend in my pocket (keeping pocket lint from damaging the ports and speaker), while still maintaining a slim profile, and allowing my camera/flashlight to be exposed if I need to inconspicuously record a crazy ex while picking up the kids, or see in the dark while having two free hands.

The only undesirable part about the clip is that it could be thinner. The bump out pushes the limit of some thinner dash mounts. Doesn't affect me, but it looks close.

Word to the wise. Make sure you let the adhesive set for at least an hour to get 75% bond strength. The 3M VHB adhesive is a strong bond, but only if you clean the surface properly and leave it alone to adhere. This is clearly explained in the instructions, but it can easily be overlooked because of the detail they go into without pictures.

Overall, very pleased with the purchase. I am glad to get rid of the pocket bulk for better functionality.

Best case I've ever had, dropped it plenty of times with no issue. I don't know if this matters to you or not but it also gives the S7 Edge the same thickness as the Note 7 so it feels like you're using one again, minus the S Pen.

https://www.amazon.com/SUPCASE-Full-body-Holster-Protector-Samsung/dp/B01BLEWFGK/ref=sr_1_1?ie=UTF8&qid=1506446341&sr=8-1&keywords=Galaxy+S7+Unicorn+Beetle+Pro+Full+Body+Rugged+Holster+Case

Ooh, I ordered the Unicorn Pro with the screen and clip

Samsung Galaxy Note 8 Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Galaxy Note 8 (2017 Release), Unicorn Beetle Shield Series - Retail Package (Black/Black) https://www.amazon.com/dp/B074W2MC7L/ref=cm_sw_r_cp_apa_uTzUzb3YPVA9R

I just got my case for my (now activated) Nexus 6. i-Blason Basically I was looking for strong protection with a kickstand. After reading a ton of reviews I pulled the trigger. Now that it's in hand I regret nothing. Strong build dual layers. I don't use the third layer belt clip holster, it mainly goes from pocket to desk/nightstand. Not bulky, good grip, feels sturdy.

Take a look at the Unicorn Beetle Pro from Supcase. Great protection and thinner than Otterbox. List price is around $25; available on Amazon for around $20.

https://www.amazon.com/dp/B0758DDS3D/ref=cm_sw_r_cp_api_i_jS09AbEMWAQTH

Too big for me personally. I have a 10,000 mAh one that fits perfectly in the outer pouch of this: https://www.amazon.com/gp/product/B00S2G7NP4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Although I have it for other reasons, I'm not playing this enough to even need it.

Can't answer about ANY stickers, but I bought these and they work just fine with the feature.

I love my Supcase Unicorn Beetle Shield (or whatever it's called) with the included screen protector taken off in favor off a tempered glass screen protector. I've dropped it quite a few times in various surfaces (I'm clumsy, what can I say) and still looks brand new.

https://smile.amazon.com/gp/aw/d/B074W2MC7L/

Anyone have any experience with these? I believe they make them for some other phones, but I cant find any reviews/videos. Thought it seemed interesting seeing that you can take the armband off and use it as a case.

I don't plan on using a case, but like to have one laying around. I figured it would be good enough to get the job done, and I can have an armband as well. Thoughts?

Im going to go with this if not.

I just got the Moko case in the mail yesterday. It's pretty solid. Doesn't look like it costs $7 at all, more like $20-$25. The kick stand is sturdy. Grip is pretty grippy. Very easy to feel the raised power/volume buttons as well, better than stock imo. The case has a sporty look to it, if you're into that kind of thing. I like it, it's pretty manly looking. Feels like it could withstand a drop or two.

I purchased the MoKo Holster cover case for the belt clip/case combo.

http://www.amazon.com/gp/product/B00E4RV8DS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

While I don't think it's a terrible case, it is certainly not a great case. Since it's the only case I have any experience with at the moment, I'm only posting this as a recommendation to avoid this one. The rubber is a bit too flimsy, the fit isn't perfect, and it's not as easy as I would like to get in and out of the holster.

On the plus side, it feels pretty rugged, it makes the back more or less flat for ease of use when setting on a flat surface, and the fact that it's not easy to get out of the holster means that it's not likely to fall out of the holster.

So there's that.

https://www.amazon.com/gp/aw/d/B074TTHD8B/ref=oh_aui_i_sh_post_o0_img?ie=UTF8&psc=1

This is the case I ordered for me. I had a holster for my Sony Xperia Z3 and honestly missed using one again. Plus, the idea of digging a 6.3" phone out of my pocket, yeah no thanks. Lol.

https://www.amazon.com/gp/aw/d/B079BS4ZQ4/ref=mp_s_a_1_4?ie=UTF8&qid=1521735062&sr=1-4&refinements=p_72%3A2491149011&pi=AC_SX236_SY340_FMwebp_QL65&keywords=galaxy+s9+plus+case

Was looking at this. Looks quite beefy and still looks modern and decent! anyone know if these are grippy or if this case likes to slide around a lot? Seeing A LOT of mention of the brands SUPCASE and SPIGEN brands.

Clip this to the rear strap.

This one


Or This one?

I use the 2nd link you posted at work. Works great.

I also have the Qi-infinity at home. Little more pricey but still works great.

Both those chargers will charge my phone using either of the following cases.

• http://amzn.com/B00OKRJLSQ
  
• http://amzn.com/B00OGXQ3LC (this case is pretty thick too)