Best cigarette machines according to redditors
We found 149 Reddit comments discussing the best cigarette machines. We ranked the 32 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 149 Reddit comments discussing the best cigarette machines. We ranked the 32 resulting products by number of redditors who mentioned them. Here are the top 20.
it comes with cones too!
Yeah, you can also get a cone artist on amazon for $6, which is a cone maker and filler :)
https://www.amazon.com/gp/aw/d/B00V2KL5CY/ref=mp_s_a_1_1_a_it?ie=UTF8&qid=1499789989&sr=8-1&keywords=cone+artist&dpPl=1&dpID=410WYG5%2BMXL&ref=plSrch
I spent an hour or two trying to find a product to up my joint rolling game, and landed on this: Cigarette Rolling Machine Loader Roller Filler. Made For RAW & CONES Brand 1 1/4 Cones. Make Perfect Cigarettes. Includes:20 Organic Hemp 1 1/4 Cones (Pre Rolled Rolling Papers) & Wooden Packing Stick https://www.amazon.com/dp/B0736GD8CW/ref=cm_sw_r_cp_apa_i_FEYTDbMA20VBM
I considered a few electronic options, they all had mixed reviews. This thing is great though, works perfectly.
One of these OP
Metal Automatic Tobacco Roller Smoking Cigarette Rolling Box Machine Case 01 https://www.amazon.com/dp/B00NZPG2RC/ref=cm_sw_r_cp_api_i_tXVaBbECH7523
These are better and you can keep your stash and papers and lighter in it.
RAW Roller Eco Plastic 2 Way Adjustable 110mm King Size Rolling Machine (1 roller) https://www.amazon.com/dp/B010QJ82EA/ref=cm_sw_r_cp_apa_eH37Bb4WS9M8H
Practice is the only way to get good. I would recommend picking up a rolling machine such as this one. Saves a ton of time and headache.
Hey buddy. Im not the guy to talk to about THC levels and all that. But the prerolls are kinda expensive. If u were gonna use those regularly I recommend hopping on amazon and getting the RAW joint roller for 10$. It works well and will save u money in the long run
https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=mp_s_a_1_3?ie=UTF8&qid=1539797371&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=raw+rolling+machine&dpPl=1&dpID=41nISmL1jVL&ref=plSrch
You could always try a joint rolling machine and see if you like that. Im so bad at rolling, but using the machine works like a charm I find. An extra $2-3 just for them to roll it for you is quite steep when you think about it, and the machine pays for itself after 4 uses at that rate.
https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
hey so I have broken both of my arms and my fine motor function in both my hands is compromised enough that rolling is kind of hard for me but I can make perfect joints by cheating! https://www.amazon.com/Zig-Zag-Premium-70mm-Rolling-Machine/dp/B003JU93F6/ref=sr_1_2?keywords=rolling+machine+70mm&qid=1570761652&sr=8-2 I use this and it works great. I know the point was to use your hands and the one you rolled is way nicer than anything I could manage, but if you just want something easy for you to make perfect joints, this things awesome. Take care frent, and keep up the hard work!
I use one of those RAW Rolling Machines as I very rarely smoke joints but sometimes they're necessary for parties or events. My hand rolling technique is trash and they come out looking like a joint from the 70's so this setup is pretty great for uniform size and shape results.
My cop out suggestion is to get a joint roller on amazon. They take a little trial and error (the first time i used it [4] i made it explode and my weed got all over me) but once you get it right it makes perfect
https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_1h1sybB0M7NEH
Nah dude that's not a fag making machine at all. That's something like this.
Looks like an antique cigarette roller. Modern ones looks like this
RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apap_edMOkcAuvMmwN
I can't roll for shit either. This makes it simple and cake to roll perfect every time. Look into vaporizers! It will change how you use weed for ever!
Yeah that’s a nice touch, the loader is only 10$ on Amazon if your interested here’s the link https://www.amazon.com/RAW-Loader-Cone-Filler/dp/B01A7C3G7Y
I've been rolling my own for a few years now. Just need an injector, some tubes and tobacco. I use smokersoutletonline for my tobacco. Comes out to ~$10/carton.
https://www.amazon.ca/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I dunno why anyone would do it the hard way when these things make it a snap. Takes me ~15 sec to roll a joint with mine.
edit: For the 2-5 times a year I want to waste pot by passing a joint around. My bubbler or vape are far more efficient...
Grab a papers roller box for him. They can be used one handed and are cheap.
Or if you suck at hand rolling, these things are handy to have.
Looks solid, nice job! I take the easy way out and just use a roller. RAW 79mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_ysbuyb9KZCJWV
Zig-Zag Premium 70mm Rolling Machine https://www.amazon.com/dp/B003JU93F6/ref=cm_sw_r_cp_apa_u-emybD0WP877
Simple and rolls perfect j's.
LPT: also get a bag of filters when you buy it and it will roll and smoke even better.
Answers.
I mostly vape. I also have a bong. I don't usually smoke canons/cones. I can roll by hand, and do, if I'm rolling something big, but for just myself and my girlfriend, I just use the RAW 1 1/4 papers and roller with the cellulose filters.
I do not use tobacco. Only smoke straight green.
I do rehydrate now, only in the last few months. Never used to. Always just picked up and smoked right out of the bag.
It does make it easier for rolling a burns a bit smoother IMO.
With the roller, you pack the weed in with a filter, close it shut, spin it and it will compress the weed to the same side/shape as the filter. Once you've rolled and compressed, slide in the edge of a paper, start spinning the roller and it will pull the paper in and wrap it around the weed and filter. Open it and you have a perfect "cigarette" every time.
When rolling cone, larger joints, cross joints, etc... I like to use something to roll the paper with, a pen, a rolled up sheet of white paper, etc... To make it easier to hold the shape. Roll the paper around whatever I'm using and stick it to create a hollow cone/tube. Then I slip a paper filter/tip from the top, down to the bottom and let it unroll itself a bit to fit the open, then fill the weed in from the top. Different people have different methods. My "hand roll" method is a bit unorthodox and "assisted" but a lot easier than fumbling weed everywhere. If that's. It an option, just use the fold in a pack of paper to hold and fill with weed, then tuck/roll a corner and spin it between your fingers, similar to what the roller does.
I prefer to use the rollers though.
If you want to pick some up to try for yourself, here's the links:
The simple RAW 1 1/4roller:
https://www.amazon.ca/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_i_cKLXCbHRW125D
With 1 1/4 papers: https://www.amazon.ca/dp/B0066WMVPS/ref=cm_sw_r_cp_apa_i_bMLXCbGKAAPZE
With the slim, cellulose filters (a lot easier on the lungs): https://www.amazon.ca/dp/B06XH6QGCX/ref=cm_sw_r_cp_apa_i_kNLXCb5DB9S6T
Loose filters can be a number of problems. Too small of a filter being the easiest thing to blame it on. If you roll straights it can be hard to make the filter stay in, I usually try to keep the filter rolled as tightly as possible and pinch it between my fingers when rolling so it will expand to fit the paper when I let go, I sometimes rip gum tips off papers and use the glue to keep filters in when I'm having trouble. Alternatively if you roll straights, I find rolling cones really makes the filter sit better, as well as smoking better. If all else fails a raw rolling machine (I bought mine couple years back at my local headshop couple years back for something like 4$, and its never failed me) is a great investment for really cheap and wont break on you anytime soon. If you load one of these with about a .8 of rolling batch and a pretty fat filter it will roll you something that is extremely similar to a brand name somke in both look and feel. Good luck and happy rolling.
Like the other guy said, spoon pipes are alot less of a hassle, but if you insist on joints here's my suggestions:
https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Get one of these. It’s life changing.
I can tell you the secret... for about tree-fiddie
And by that I mean buy the aforementioned rolling machine... it's just over 3.50 on amazon with free shipping.
good idea! i just bought this to match these papers! and you put up a very valid point with the technicalities of the tubes vs thin rolling paper and the filters! thanks for ur input!
Your problems are solved
http://www.amazon.com/New-Top-O-Matic-Cigarette-Rolling-Machine/dp/B0024S00VA
buy a pack of Randy's to learn with. The wire in it makes it easier to learn rolling technique. They arent the greatest but do the job and it has the built in roach holder. Or get this and a grinder and they work awesome
Dude, you could just buy one of these: https://www.amazon.com/Electric-Cigarette-Rolling-Automatic-Injector/dp/B00NP60GRI
Dunno if a commercial grade machine would be feasible. I don't think supplying yourself with cigs is forbidden as long as you don't sell them. However this may depend on your local statutes.
That's totally what it is. Thanks!
For cost savings, maybe try rolling your own. As I understand it, there are different levels of it, where the more skill you have the less complicated the tools are. You can freehand roll them, use a plastic machine
Or use an injection machine with filter tubes which are like cigarettes without the tobacco.
https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I believe he’s talking about something like this and if that’s the case these will make your life 100% easier if you can’t roll too good on your own
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1?ie=UTF8&qid=1381356746&sr=8-1&keywords=raw+rolling+machine
$3.50 on Amazon. Rolling machine, 4 pack of papers (128 papers) and 500 filter tips for a total of $13.00
https://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3_s_it?s=hpc&ie=UTF8&qid=1481849549&sr=1-3&keywords=zig%2Bzag%2Broller&th=1
Or just type joint roller in amazon. They are super easy to use and make fat joints in a second or two
I dont know about cigarette injector, but before I learned how to roll joints I had bought a raw roller. It makes flawless joints and it's really quick. this is the one I got. You can get a 1 1/4 size and a king size. But now I roll my joints faster. It just takes practice man.
Buy one of these.
But if you're wanting something now you can always use 2 pencils, wrap the paper around one, lick it and seal it like you're rolling up the pencil and then push the paper up the pencil and pack the weed into it with the second pencil until the paper is full. Then twist it at the ends and fly to the moon.
This is electric and has a bunch of unnecessary knick-knacks, but It was totally worth it.
Powermatic 2 PLUS Electric Cigarette Injector Machine
https://www.amazon.com/dp/B003TQPRDW/ref=cm_sw_r_other_awd_9WZHwb5ND76QB
I use this one
it's for king-size papers
I have no idea if it works for smaller papers
one of the veterans here probably knows
Buy a rolling machine. https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=mp_s_a_1_6?keywords=cigarette+rolling+machine&qid=1564366234&s=gateway&sr=8-6
you twist it in case you dont plan on smoking it within an hour or so and you are worried about it falling apart.
looks pretty loose so it was a good idea for him... goodtry/10 bro
maybe think of investing in a roller-
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Sorry to reply again, I found organic loose leaf tobacco on the net and it's cheap ($24 a pound), do you have any opinions on this cigarette machine?
Daycount® Metal Automatic... https://www.amazon.com/dp/B07868XZJG?ref=ppx_pop_mob_ap_share
I got something similar to this but it's plastic instead of metal..works like a charm, plus makes it easy to roll with a filter
Easier to get a rolling machine. https://www.amazon.ca/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
You should check out the auto loader. I know it’s unnecessary but its cool and fun and a step up from that funnel you have.
Raw Natural Rolling Papers Cone Filler - Cone Shooter Machine (1 1/4 Size) https://www.amazon.com/dp/B00NEZPK9Y/ref=cm_sw_r_cp_api_i_mg45Ab4QAD9DF
I highly recommend a Raw “cigarette” rolling machine! Once you get the hang out of it, there’s no turning back!
Joint Roller
check this out, I don’t use it but I heard it gets you perfect joints every time!
Well, mine is Raw, I got it from Rock universe. Most headshops should have them. Or buy from Amazon - https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
ninja edit: OCS might have some under accessories
As far as rolling a joint goes if you don't have the patience to master doing it freehand you can always get a rolling machine. They are sized to fit a particular size of paper so be sure the roller and papers are the same size.
Trade-Ctore RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine
how to video
https://www.amazon.com/Cone-Artist-Roller/dp/B00V2KL5CY
Reminds me of this:
https://www.amazon.com/Cone-Artist-Roller/dp/B00V2KL5CY
This is the same concept and it can be used to fill and pack the joint too!
Try using a cigarette roller. My thumbs are shot and this makes it super easy.
There was a thread not too long ago (maybe an hour) talking about some tips and tricks for rolling. If you like me and can't roll to save your life, pick one of these up.
https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I got you 👌🏻
https://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_2_a_it?ie=UTF8&qid=1494087142&sr=8-2&keywords=rolling+machine
The Cone Artist, $5 on Amazon. Takes a little bit of practice but their tutorials videos on Youtube helped a ton. I get perfect joints every time.
https://www.amazon.com/Cone-Artist-Roller/dp/B00V2KL5CY
Ever used on of these? Cigarettes are horrible for your circulation which won't help your dexterity. Do you like rap music? You could get yourself an MPC instead of a guitar and make some beats or something...
https://www.amazon.com/Electric-Tobacco-Shredder-Cutter-Converter/dp/B00O75IZXI/ref=mp_s_a_1_4?keywords=electric+weed+grinder&qid=1574622735&sprefix=electric+weed+&sr=8-4
It looks like it has great reviews. I hope this works out for you.
get a rolling machine:
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I have one of these and it works like a champ.
Machines that produce only one cigarette at a time are not considered "automatic".
As soon as you attach some means of having the machine (rather than a person) attach a second, third, fourth, or Nth tube... then it is considered "automatic" (even if it is not powered by a motor) and is determined to be "manufacturing".
So, AFAIK, these things and these things are even these "electric" ones are all considered "A-OK" because they can only "fill" one tube at a time, and a human has to "insert/attach" a new tube for each cigarette made.
It's really NOT that big of a deal -- once you get used to the process, you can easily make a day's worth of cigs (say a single pack worth or 20 cigs) in about two to three minutes -- probably about the same amount of time most people spend everyday prepping a pot of coffee from their home coffee maker (and certainly less total time than people spend if the coffee maker isn't setup on a time, and you include waiting/brewing time).
If I don't feel like rolling, I use one of these. Cheap, and effecient.
Good luck m8
Almost everybody had one of these, tho
Yes but it will stink and also taste differently when you relight it.
I’m not sure about at Ganjika or the OCS but at the Wee Smoke Shop in dt Brampton you can buy rollers. The brand is Raw and it’s no more than $10. It’s a little contraption where you put the weed into it and a filter paper, then you just close it, feed a rolling paper through, give it a twist, lick the paper and you have a smokeable joint. (Not the prettiest or best roll but it’s fast and small and convenient). Here’s a link to it on Amazon
It's the RAW 1.25 roller. You can get it here on Amazon
Think about rolling your own -->smoke real tobacco. 4,800 industry cig chems will be out of your system in a week. Perks. Save $. Less time standing in line. ps I'm not trying to sell anything.
Anything "RAW" in that case. Without spending too much money I'd suggest a raw rolling tray, raw papers (1 1/4 size is what most people roll with), and some tips! If he has a difficult time rolling his own joints you could always get him a rolling machine. They're pretty cheap.
Rolling machine
Tray
I cannot vouch for the machine, but everything else is pretty basic. Pretty much everyone uses Raw papers these days. I prefer variety myself, but yeah.
This is the one I got and here is a larger one.
This is the easiest way to roll a joint I've found. Just roll a crutch and slide it into the bottom of the orange tube. Then wrap a king size paper around the tube and the top of the crutch and seal it. This allows you to pull the cone cleanly off of the orange part. Then you put your cone on the clear part, and put ground herb into the top. You can shake it around, or use the orange part to pack it down.
1 X Cone Artist Cone Roller https://www.amazon.com/dp/B00V2KL5CY/ref=cm_sw_r_cp_apa_i_kKLsDbKTG33YW
They make little plastic ones that you can get anywhere you buy papers. They come in different lengths, and it's best to get the one that matches the paper you like. Here's one example:
https://www.amazon.com/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3_a_it?ie=UTF8&qid=1511527866&sr=8-3&keywords=rolling+machine
It's hard to explain until you have the machine in your hands, but you can roll just as tight or as loose as you want by applying a little finger pressure to the bars. You'll see.
Once you get the hang of the machine, you can do the same thing with a dollar bill. Again, its hard to explain, but once you see it happen if front of you it's easy.
This doesnt answer your question but if you are looking for a roller id recommend one like this: https://www.amazon.co.uk/Premier-Automatic-Cigarette-Rolling-Machine/dp/B003OSPB8G i got one for my mother, whos hands are all fucked up, at a local head shop and shes been using it for 12+ years now. they make a nice joint as long as you dont try to roll a pinner (she does ~0.5gr/joint).
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1?ie=UTF8&qid=1464044235&sr=8-1&keywords=joint+roller
Here's a RAW joint roller:
https://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1_a_it?ie=UTF8&qid=1467441570&sr=8-1&keywords=raw+roller
They also have one that's 110mm
pick this up at the local shop for 5 bucks a few weeks ago and really love it..my cones are starting to look professional
This probably wouldn’t work for dry papers but they do make really cheap machines just for that. They come in many different sizes for typically under $10. It’s the only way I can roll lol
RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_api_i_Vf0nDbMJ06HET
Just get a cigarette roller. They are cheap, easy to use, and roll a perfect joint every time.
https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_awdb_t1_whtmDbKRM9TMZ
It would probably be much cheaper to get this.
Trade-Ctore RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_vMdEzbS3HPJF6
Just get a roller.
Bought mine for like 5 bucks from a corner store.
Just buy these: https://www.amazon.com/Boxes-PRE-ROLLED-tips-Total-Tips/dp/B00HWFTF2A
and: https://www.amazon.com/RAW-Plastic-Adjustable-Rolling-Machine/dp/B01AOG66HU
Unless you're an elitist who wants to not use tools and be an artisan about it.
I would advise you to pick up a Raw rolling machine and your own bud. Pre rolls can be made with shitty floor weed much like fake cigars are.
Not saying they all are, but some definitely are made with crap quality and its much easier to make pinners with that machine.
Thank you.
I have one of these on order; https://www.amazon.ca/Raw-Premium-Automatic-Cigarette-Rolling/dp/B018BE26TO/ref=pd_sbs_121_3?_encoding=UTF8&pd_rd_i=B018BE26TO&pd_rd_r=ff8734c0-d3f1-11e8-acb5-95f73567967b&pd_rd_w=ayZQD&pd_rd_wg=0umSo&pf_rd_i=desktop-dp-sims&pf_rd_m=A3DWYIK6Y9EEQB&pf_rd_p=d4c8ffae-b082-4374-b96d-0608daba52bb&pf_rd_r=7WTC5PK6VVNPHYENPJ7Y&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=7WTC5PK6VVNPHYENPJ7Y
Oops, not that one... the slightly bigger one but same idea. It was mentioned in this thread.
Just need some appropriate filters and OCS to get their act together. :)
If you smoke regularly then I recommend you get this https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_api_sqlqzb3NDCH8J. Buy some Elements King size Papers and a pack of tips. You'll save a lot of money!
I use a grinder. The buds don't break up enough for me when I do it by hand. Use a RAW rolling machine to roll joints. They burn a lot better that way because I can't roll a joint on my own to save my life. Lol
King size rolling tin off amazon/eBay
Maybe try one of these little rollers if you want to start rolling your own. Takes about a minute to make a perfect rollie without a fuss... I like to pack mine extra tight so they go out if I don't keep puffin.
you can also just get filters and papers, and use a rolling machine: https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3?keywords=rolling+machine&qid=1558931853&s=gateway&sr=8-3 put the filter in at one end and put the flower in the rest...
Buy one of these, totally worth it.
https://www.amazon.com/Cigarette-Machine-Zen-Replacement-Sleeves/dp/B075FWXZJW
Anyone else fuck with this awesome cone loading machine?
Raw Natural Rolling Papers Cone Filler - Cone Shooter Machine (1 1/4 Size) https://www.amazon.com/dp/B00NEZPK9Y/ref=cm_sw_r_cp_api_k4pTyb3STZDS4
Amazon has them for less than $5, and my local tobacco shop has them for less than $3. Amazon Raw Rolling Machine
You should get a joint/cigarette roller like this one . It’s great for shaky hands because it does all the work for you. They are also cheap. One of these would help you so much!
Have you looked at rolling your own? I was smoking a pack a day at about $6 a pack so around $180. I bought a cigarette stuffer, tubes (these were the best I found personally), and tobacco and got that down to $1 a pack $30 a month. It can be more expensive if you go with really expensive tobacco but I just went with gamblers or something like that and it tasted fine to me.
I discovered this little beauty a few weeks ago. It fills empty cones.
https://www.amazon.com/Raw-Natural-Rolling-Papers-Filler/dp/B00NEZPK9Y&ved=0ahUKEwic3O27uZPUAhUFyoMKHcmfAQkQFggdMAA&usg=AFQjCNGGQCM9n7J55FdgTaeOnjP2FsjWsA&sig2=1l8s-foORzjLOCA8WMhuwQ
Raw Cone Filler
Try this
Idk about blunts, but I do know joints.
For joints, the #1 mistake that I've learned not to make is to roll it/pack it too tightly. If you roll it or pack it too tightly, that joint will be running like a mf. It took some time for me to feel what is an overly packed joint.
Basically, if you squeeze it and it doesn't budge nearly at all from how tight it is, it will start running.
To avoid this problem, I do this: After I roll the joint, I twist 1 end. If I feel that it is too tight, I start rolling the joint in my fingers to loosen it, it's okay if a little weed falls out. It is kind of difficult for me to describe when a joint is not overly packed/too tightly rolled but also not "loose" either.
Again, basically if your joint is so tight that it feels like a candle stick and will not "give" when you squeeze it, you need to do the loosening technique. An under-packed joint should be obvious as weed will be able to slide up and down the joint.
Here is the joint roller that I use. It took some practice to learn how to roll good joints that weren't too tight or too skinny, but once I learned how to roll joints well with this, I never rolled by hand again.
For specifics, this is the grinder I use:
https://www.amazon.com/Electric-Tobacco-Shredder-Cutter-Converter/dp/B00O75IZXI/
I can't stress how awesome the automatic cigarette rollers are. They are 5 bucks, and worth their weight in gold.
it takes about 2 minutes to learn how to use it.
every joint you roll is perfect, cylindrical, tight, same diameter of a cigarette. and because they are so perfect, they look a lot more like a cigarette.
edit: here is the one i have
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I cheat and use a cigarette rolling machine, like this:
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Plus the tips they have in the "frequently bought together". Perfect cylinders every time, no burnt fingers or lips.
Maybe buy a grinder and a vape. Or even cheaper, a grinder and a rolling machine like this
Those cheap little rolling machines really work.
Example ----> www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Try a rolling machine (Amazon). I've given up on hand rolling. Honestly even the rolling machine was a pain in the ass for me to get right (took me like 20 attempts after watching a REALLY simple youtube video) but eventually I got it right.
The thing I figured out was that the herb needs to be somewhat dense for it to roll right. I only like to smoke a little at a time so I didn't want to fill the entire joint.
I fixed that by cutting a piece of a plastic drinking straw and stuffing it with rolled up filters. I put the straw at one end of the roller, and the (actual) filter at the other, that way I can pack herb into the open area tightly without using too much.
Now that the herb is packed in nice and tight, I roll it up, seal it, and kind of pinch the straw out of the joint and twist it up. They come out a little pathetic looking but who gives a shit? They smoke really nice and it's the perfect amount.
If you're interested I can take a few pictures to illustrate what I mean about the straw.
It always takes awhile for me, never could roll a decent one quick.. I picked this up a few years ago. Perfect every time. https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_awd_OAXPwbAFVSDAH
One thing I miss that I used alot... is a roller. I can twist a J on my own but a roller was so nice to make really fat Js or I could do a mini blunt, just cut paper to length and let it dry in the roller. Works like a champ. Then you got to get the grape blunts and papers and you have a good start. Let us know what you get! [4]
https://www.amazon.com/dp/B003JU93F6/ref=cm_sw_r_awd_0MYGwbNFW1239
I've never used them. If you're not familiar with hand rolling I recommend this like thing.
Don't try to overstuff it and you'll make perfect little cigarettes. Use 1.25 papers.
I recommend the Cone Artist, a great alternative rolling device.
Besides the obvious quitting, the way way I got by on smoking on a budget was by getting a nice electric tube injector and packing my own cigs. Expensive investment but it saved me a fortune in the long run. Once I found a few types of tobacco I really liked, I blended them together and ended up liking that much more than factory made cigs. They had less of the other chemicals in them too which made it a lot easier to transition off of when I finally decided to quit. Switched to vape, lowered the nicotine over a few months, and now I'm basically completely quit, besides the occasional cig or cigar when I'm out drinking with friend.
I have something similar to this, but made by Zen and I absolutely love it! Incredibly easy and fast. I also add the filters to it before I roll them.
I don't know how it works but I found one real quick on amazon for you.
http://www.amazon.com/New-Top-O-Matic-Cigarette-Rolling-Machine/dp/B0024S00VA
I too have issues with my hands and I found a thing on Amazon called The Cone Artist for about $7 that really helped me. It's two pieces that fit together to give you a cone shaped mold to roll your paper around with a recess to hold a crutch. After you've formed your cone, you can slide it off, pack the funnel, and fill accordingly. Super simple and mine has lasted for a couple years now. I've also seen them from time to time in local head/glass shops. Here's a non-affiliate amazon link to it. Hope this helps, Ent! Good luck!
if you're gonna get one i recommend getting tips. helps keep the grass in and lets you burn all the tree without leaving a roach. you can get bigger ones too and package deals with all of it. also remember to roll towards you and not away.
Someone on this reddit turned me onto the Cone Artist cone roller, it is awesome! It does what this pencil does, but then also helps with loading it up.
https://www.amazon.ca/dp/B00V2KL5CY/ref=cm_sw_r_cp_awdb_t1_2o3WCbWMHW3DY
worth the money, makes perfect cones.
I use this:
https://www.amazon.com/Cone-Artist-Roller/dp/B00V2KL5CY/ref=sr_1_2?keywords=cone+roller&qid=1556348010&s=gateway&sr=8-2
They are perfect for cigarette rolling machines like this
https://www.amazon.com/New-Top-O-Matic-Cigarette-Rolling-Machine/dp/B0024S00VA
Something like this maybe?
https://www.amazon.com/gp/aw/d/B003TQPRDW/ref=pd_aw_vtph_121_tr_2?ie=UTF8&psc=1&refRID=977TAHA1172YJ7F01TC8
Not really. The stuff you're thinking of putting in it is typically more moist and doesnt pack as well in a machine of this caliber. Save the $70 bucks and maybe go with something like this instead.
http://www.amazon.com/gp/aw/d/B002CNE9H8/ref=mp_s_a_1_3?qid=1449539448&sr=8-3&pi=SX200_QL40&keywords=cigarette+roller&dpPl=1&dpID=41m6FQ7ldPL&ref=plSrch
Although hand rollies still work better i think.
...or anyone who isn't rich, can do some basic math, and isn't afraid of some random person on the internet calling them a hipster. :P
Seriously, though, the savings from your first rolled carton alone versus a bought carton ($~13 v. $~80 here) will pay for a good injector.
Now even when you're slow about it, an injector like that's going to let you roll a full 200 cigarettes in about 40 minutes.
So if you're among the select few out there who can get away with valuing an hour of their time at over $100 ($67/40*60=$100.50), this might not seem too appealing an idea. Since it's only a tiny minority who get anywhere close to that and the largest portion of the population makes closer to a tenth of that, I thought it would be worth mention.
1 X Cone Artist Cone Roller https://www.amazon.com/dp/B00V2KL5CY/ref=cm_sw_r_cp_apa_i_5sXZCbBAE6A11
Easiest way to make cones
Problem solved
Don't buy "cones," buy a $5 cone tool and just make your own.