Best cotton balls & swabs according to redditors

You may consider reusable cotton rounds and a liquid eye makeup remover/micellar water if you want to be a little more environmentally conscious.

Here are some options for the curious: https://www.amazon.com/dp/B07MSHTTXY/ref=cm_sw_r_cp_apa_i_YGpEDb0J02XCZ

https://www.etsy.com/listing/470269814/reusable-facial-rounds-3-inch-facial

The one and only

For anyone not in the know, 200 organic Japanese, non-bleached cotton pads, $6.15 from Amazon.

Yes, 200 pads for 6 bucks. I've been using this exact brand for the last two months and the cotton is great.

Anything other than this is pretty much a waste of money imo

https://www.youtube.com/watch?v=hxuE-WE17Fg

http://www.steam-engine.org/coil.asp?r=0.642&hfnw=20&awg=26&id=2.5

https://en.wikipedia.org/wiki/Heat_flux

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_3_a_it?ie=UTF8&qid=1488353677&sr=8-3&keywords=cotton+puff

https://www.temcoindustrial.com/kanthal-a1-resistance-wire.html

https://www.fasttech.com/products/0/10030588/6701601-stainless-steel-ceramic-tweezer-for-e-cigarettes

https://www.fasttech.com/products/1243300

https://www.fasttech.com/product/1926001

https://www.fasttech.com/products/0/10012406/2134501-derringer-styled-rda-rebuildable-dripping-atomizer

Click on all those things and if you understood everything you're a master jedi, nothing can stop you.

These

Study ohm's law and battery safety. If used improperly, mech mods can become a pipebomb.

That being said, here's a list of stuff you should get.

• stingray x clone
  
  
• RBA suggestions:
  
  
• mephisto v2 (clone)
  
  
• mutation x v2 (authentic)
  
  
• lancia clone (clone)
  
  
• billow RTA (authentic)
  
  
• samsung 25r x2
  
  
• nitecore d2
  
  
• ohm meter
  
  
• kanthal:
  
  
• 26ga kanthal
  
  
• 24ga kanthal
  
  
• japanese cotton pads
  
  
• precision screwdriver set
  
  
• ceramic tweezers

Organic and unbleached prrefrably. I use primarily puffs .

This one
https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_2_a_it?ie=UTF8&qid=1478911568&sr=8-2&keywords=puffs+cotton

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_3_a_it?ie=UTF8&qid=1458490020&sr=8-3&keywords=ko+gen+do

This I bought it like two years ago and it's still basically full.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

This gets recommended the most.

I've been using the same bag of Labo Puffs for well over a year now, probably almost two(In May it will be two years, if memory serves) I got it from Amazon Prime, just make sure that you select a U.S.-based vendor or else it will get shipped from Japan and could take a week to 10 days.

I've had great success with these-there's no "fresh cotton taste" and the fibers are well combed/aligned which greatly assists with wicking, be it regular or Scottish Roll technique.

I've started using reusable cotton rounds about six months ago and I love them! I don't wear make-up and I've heard that they may stain from the make-up if they're not soaked in cold water afterwards.

These are the kind I use: https://smile.amazon.com/gp/product/B078N4R8LH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

I use these!

http://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_2_a_it?qid=1457904755&sr=8-2&keywords=puff+cotton+organic&pi=SY200_QL40

Been using this for over a year. Love it

Love these

Damn near lifetime supply, and they have been better than rayon for me.

Vape shop employee told me he worked for wicknvape which makes cotton bacon and they literally take these ORGANIC Cotton Makeup Puff, Medium https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_cp_awd_ZGuQwbG58PC58

And the tear off both sides and package it...

You can do the same thing just remove the flat sides

Looks like you picked up a referral link somewhere along the way. Here's the product you linked to without the referral:

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_2_s_it?s=beauty&ie=UTF8&qid=1522219456&sr=1-2&keywords=organic+japanese+cotton+pads

ORGANIC Cotton Makeup Puff, Medium https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_cp_apa_vh0qybW3389W0
Not prime, sorry

It's Rayon. TENCEL (Lyocell) actually. Still pretty much Rayon.

Go buy 500 feet of it for $20 at Sally Beauty Supply or online.

https://www.amazon.com/Graham-CelluCotton-Beauty-Fibers-44060/dp/B00PBF8PAG

Asian cotton pads, such as SELENA or Muji ones are quite different and don't tend to fuzz apart. I have cheapo ones from Daiso that aren't layered like these, and even they hold up much better than their Western counterpart. Have you tried?

There are also water activated cleansing cloths but those have their own stuff already so I'm not sure you'd want to use micellar water with those.

I use the Hada Labo Rohto Hadalabo Gokujun Hyaluronic Lotion Moist. I find that if I apply it before a sheet mask the hyaluronic acid really helps my skin absorb the sheet mask essence. You can also use the Hada Labo lotion to make your own sheet mask with puffs like these. There are step-by-step directions in the first review on the Amazon page.

You need:

• Wire - Zivipf or The Crazy Wire Co are highly recommended
  
• Wick - japanese cotton (like Muji: easy to work with, cheap and available from ebay or amazon). Alternatives: regular organic cotton, rayon.
  
• tools to wrap your coils around - a precision screwdriver set or a coiling tool (like this or this)
  
• good scissors
  
• (ceramic) tweezers
  
• ohm meter (optional, you can measure the resistance on a regulated mod, but I highly recommend buying one)
  
• flush cutter
  
  You can buy these items separately (for cheap via Fasttech, or domestically), or, if you don't mind the markup, in DIY kits (like this Coil Master kit).
  
  Rebuilding isn't that hard, and it's so much cheaper than buying coil heads. There are tons of Youtube tutorials (or written ones) to help you get into it. Building and wicking RTA's is a tiny bit trickier than building RDA's because of the size of the build deck and potential leaking issues, but that shouldn't discourage you.
  
  I can't recommend the Aromamizer, because I don't have one, but in my opinion a tank with a velocity style deck is a good idea. You can get an RBA deck for the TFV4, too.
  
  Edit: Steam Engine is extremely useful.

i recently ordered reusable little cotton pads from amazon for that reason! they're made of bamboo velour i believe. incredibly soft and can be washed in the bag they come in. micellar water is so gentle that i think this is a good compromise.

https://www.amazon.com/gp/product/B078N4R8LH/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

https://www.amazon.de/Cotton-Labo-ORGANIC-200pc-japan/dp/B000TCD51A/

I hope you're 18 or otherwise I'm going to report you to the authorities.

Here for you, all hail to the cotton lord savior.

https://www.amazon.de/Cotton-Labo-ORGANIC-200pc-japan/dp/B000TCD51A

Here you go.

Throwing my two cents in - Japanese cotton is significantly better than cheap cotton balls.

You can get several years of J cotton for $6 on Amazon:

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_6_a_it?ie=UTF8&qid=1468700550&sr=8-6&keywords=japanese+cotton

I don't know, I mean, you can get high quality Japanese organic cotton for so cheap, not sure I'd risk it.

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_3_a_it?ie=UTF8&qid=1462235385&sr=8-3&keywords=puffs+organic+japanese

Or if you want to get fancy:

http://www.amazon.com/Koh-Gen-Do-Organic-Cotton/dp/B00NU3H3KE/ref=sr_1_1_a_it?ie=UTF8&qid=1462235420&sr=8-1&keywords=ken+do+gen

Either of those packs could easily last you a year or longer for $10 or less. I have been using the Puffs for a long time now and I think it's great cotton, I have some of the Ken Do because people swear by it, but I can't tell the difference honestly.

I started learning by watching youtube videos. You can watch Rip Trippers, VapnFagan, or GrimmGreen(I like this one the most). There are a ton of videos out there, and if you have a vaping channel you watch on Youtube, I bet that they have a video for it.

I would also suggest buying a kit to get started, if you don't have screwdrivers, wire cutters, scissors, and etc, then get something like this if you want to get it all in one go. Otherwise, you can buy it all piece by piece. I would suggest 26 gauge Kanthal to start out.

http://www.steam-engine.org/coil.asp - This is the best site to use for helping you select your build, put in the ohms that you want under the target resistance, select the number of coils(single, dual, triple, and so on), and pick the gauge of your wire under the diameter of wire. In the middle, you will see it says 'inner diameter of coil' that is where you pick the size of the rod, or screwdriver you are wrapping around. If you bought that vape toolkit, I almost always use 2.5mm as my inner diameter. After that, just follow what was shown in the video, cut about a foot of wire, maybe a little more, and start building.

Just remember, you are going to mess up, but so long as you are safe(use that ohm reader), and don't build something stupid low, you should be fine. I assume you are using a regulated mod of some sort, but you still need to check the coils on your ohm reader. If you have any more questions, hit me up.

Also, here is a cheaper toolkit, you will just need to buy wire as well: http://www.lightningvapes.com/products/ultimate-vape-toolkit1

Wire: http://www.lightningvapes.com/collections/kanthal/products/kanthal-a1-resistance-wire?variant=993082744


Also, you will need cotton: http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1_a_it?ie=UTF8&qid=1458601743&sr=8-1&keywords=puffs+cotton

That puffs cotton, has lasted me for over a year, and is going near two years.

So they take Japanese cotton that they get for <$9/200pc, put 5(?) of them it in a ziplock bag, stick an ignorant ass sticker of a Chinese stereotype on it, and charge what for it exactly?

This raised my ire. Not only is it stupid, it's also a ripoff. The vaping community really swizzles my dizzles sometimes.

link for the lazy

You certainly are a smart shopper! It's good to know what you want, but sometimes it narrows down your search. That said, I think your options are thus:

| Siegeli| iPV3| Cloupor T8
---|---|----|----
Price| $99.99| $139.99| $139.99
Wattage| 100w | 150w| 150w
Dual Batt.| Yes| Yes| Yes
Magnet Back| Yes| No| Yes?
O-B Charger| No| Yes| Yes?
Flush 510| Yes| Yes| Yes
Silver Option| Yes| Yes| Yes
Black Option| Yes| Yes| Yes


Personally, I would go for the Siegeli. There's an option for an extra magnet back in place of screws that you can get here.

Aside from that, you're going to need:

1. Batteries: I recommend the Samsung 25-R. It can be found as an authentic quite easily and for a decent price, whilst maintaining specs comparable to VTC5s. Alternatively, I've also heard good stuff about the LG HE2, although it seems the 25-R has the edge.
   
2. Wire: I recommend heading over to ebay and buying some TEMCO brand kanthal in 24ga, 26ga, and possibly 28ga. You can usually get around 100 feet of each for around 6 bucks.
   
3. Wick: This is definitely a personal preference. I prefer using Japanese cotton pads, but many people stick with plain old organic cotton balls or rayon. You can find Japanese cotton pads on amazon. Otherwise, you can find organic cotton balls at your local CVS. You can also get a lifetime supply of Rayon for around $12 I believe, but I can't recall where. If you search /r/ecr a bit you'll find it.
   
4. Ohm-meter: A fairly important part of your setup, much more so for mechanical mods, but still good to have. You can find one for around $10 on Fasttech.

Personally I use this http://www.amazon.com/gp/aw/d/B000TCD51A/ref=pd_aw_sbs_1?pi=SR115%2C115&refRID=0DT631YNTM8JFJA0G57F

But people swear by koh gen do lol

Fused clapton wicked with Japanese cotton.

As for cheap flavor geared rdas, the Lancia the hobo and the Veritas are all very good.

fasttech is pretty expensive for that. you can find good cotton with free shipping directly from japan at amazon (for half the price). Puff, Muji, Koh Gen Do ... all good stuff.

https://www.amazon.com/Cotton-Labo-ORGANIC-Puff-120pc/dp/B000TCEXOS/

I tried most of the fancy stuff (cotton bacon, fiber freaks, nameyouroverpriced cotton) and in the end I am super happy with Koh Gen Do. Do not fall for the marketing blabla...

Get these. Less then $7 for 180 pads.

these muji ones are great

Yeah I hear you! I loved my cotton balls but I threw so many away and the costs adds up. Here's the link to the ones I use: https://www.amazon.com/dp/B07MSHTTXY/ref=cm_sw_r_other_apa_i_O1HXDbN75AWGB

Let's not wait that long, http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

This is everything I Use.

I got ORGANIC Cotton Makeup Puff, Medium because of the price, and it works great. its organic japanese cotton pads. i dont have much to compare it against though.

Puff Organic Cotton seems to be the standard for almost everyone I know. Cotton Bacon and other cotton "specifically for vaping" have all seemed to be a massive waste of money in my experience. Learn how to properly wick and organic cotton pads are the cheapest and best way to go.

This cotton is great and $7.39 for a nicely sized bag.

http://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

$8 shipped. Ordered some in November. I change my wicks up to two times a day and gave given a few pads away. I am not past the green line at the top of the package.

Great stuff. My organic cotton balls have taken a back seat to this. Much easier to work with, and it wicks great.

Edit: It ships from Japan but it got to me in the US very quickly. Faster than some other things I ordered that shipped from the US.

Kanthal/Nichrome

Organic Cotton

You want the thickest vapor, then you will want to use a Rebuildable Dripping atomizer in conjunction with a mechanical battery tube. Something like this: http://www.youtube.com/watch?v=_ZMjRx2LAC4

My suggestion, if you really have no budget, is a Surefire King mechanical mod

http://shop.vaperev.com/devices/mechanical/knurled-king-mod.html

And an atomic Rebuildable Dripper

http://www.okcvapes.com/mcv-atomic-rba/

And a Drip tip

http://www.okcvapes.com/pro-drip-tips/

And some batteries (18650)

http://www.okcvapes.com/aw-imr-batteries/

And a charger

http://www.okcvapes.com/nitecore-intellicharger-i4/

And some 28g A1 Kanthal Wire

http://www.okcvapes.com/kanthal-wire/

And some Organic cottonballs

http://www.amazon.com/Organic-Cotton-Balls-80-Count/dp/B000YL8NOK/ref=sr_1_1?ie=UTF8&qid=1383120447&sr=8-1&keywords=Organic+Cotton+Balls


There are tons of videos on youtube that will teach you how to set all this stuff up. Let us know if you have any questions.

Most wire is just re-branded [Temco wire] (https://temcoindustrial.com/shop/wire-cable-accessories/non-resistance-wire). Go straight to the source and pay pennies on the dollar compared to branded wire.

Cotton/wick is just about the same - just go for unprocessed/non-bleached cotton. [Shiseido] (https://www.sephora.com/product/facial-cotton-P173726), [Puff] (https://www.amazon.com/Selena-Organic-Cotton-Puff-200Pc/dp/B00N7E9YYO/ref=sr_1_3_s_it?s=beauty&ie=UTF8&qid=1509981371&sr=1-3&keywords=puffs+cotton), [Muji] (https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1509981407&sr=1-1&keywords=muji+cotton), etc. Or get some [Rayon from Amazon] (https://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0). $7 for enough wick to last you several years.

I vote for Takashima Cupertino Store despite the parking situation.

I'd like to see if it's possible to meet at a restaurant or boba place first and then mosey over to Takashima. This gives us time to meet each other and also gives people time to find parking/beat traffic/find us in this confusing plaza etc..Thursday or Friday evenings, Saturday all day and Sunday after 1:00 PM on any date works well for me.

I'd like to product swap (seeking a single Freeset Donkey Milk mask) and pick other AB-er's brains for tips n' tricks on my skin type (dehydrated).

Also - looking to become a MIZON snail convert but haven't been able to patch test any samples on my skin yet!

May possibly bring another friend who is a non-redditor who is completely new to AB skincare.

p.s. This store also sells DIY SELENA multilayer cotton puffs 80 ct useful for Hado Labo DIY face masks with Gokujun lotion for $3.50!

http://www.amazon.com/Selena-Organic-Cotton-Puff-200Pc/dp/B00N7E9YYO/ref=sr_1_2_a_it?ie=UTF8&qid=1458851094&sr=8-2&keywords=cotton+labo

Is a better deal on better cotton imo.

Cotton ball, as in regular off the shelf cotton balls? You know those are bleached right? You shouldn't use those.

https://www.amazon.com/gp/product/B00N7E9YYO/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

You don't put cotton down the wells because depending on how you setup your wick it won't properly draw in the juice. For demonstration purposes here are pictures I literally just took for the purpose of this post to demonstrate what I do:

http://i.imgur.com/jeNvOgu.jpg
http://i.imgur.com/7bCx6ap.jpg

I have 4 Griffin 25s and they are all setup this way. This is also a Scottish Roll in a 3mm diameter clapton for anyone who wants to know.

For makeup, I'd recommend just sticking to items sold directly from the company or sold and shipped by Amazon. theBalm Cosmetics is available on Amazon and I love their face products (Mary Lou Highlighter, The Desert Bronzer, Instain/Boy Blushes). Sleek Makeup is also available which is great since they're not readily available in the US. I recommend their eyeshadows, face products (highlight, blush, contour kit) and their liquid lipsticks.

I also like buying makeup tools and organizers from Amazon. A few that I've personally bought and love:

• Makeup Brush Tree
  
  
• Muji Facial Cottons
  
  
• Lipstick Organizer

I use Muji as well. I’m really happy with its performance. Here’s a link for OP...

MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 180pcs https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_cp_api_wWcOAbF0C0H6Q

or you just buy japanese cotton on amazon for 8 bucks for like 180 sheets they will alst you years. I have even given and sent friends some becuase you get so much

A lil cheaper on Amazon.

Don't waste your time with any of that "made for vaping" cotton crap!

Bought two of these babies when a buddy and I started vaping and we haven't even made a dent in our supply, I'm convinced some B&Ms and vendors probably just throw a couple sheets of this stuff in their "premium cotton" baggies.

If you're going through a shit ton of coils a month then I'd honestly look into getting an RDA. They give out 100% if not more flavour than a tank. You'll also use a hell of a lot less juice. You don't really need nic salts in them either which I personally prefer and consider safer.

Downsides though.

Everyone talks about the effort of building a coil but meh I bought a pack of 42 pre-made super fancy ones (coilology 7 in 1 kit) for 12 quid. A coil will last 1-2 months. Single coil RDA's are the best tasting ones too btw, dual ones just make more clouds in my opinion. Recommended ones are the Asmodus C4, Cthulu Cthulhu Mjolnir and the cheapest but somehow still really good Wasp Nano. Some of the RDA's are a bit restricted like the C4 but no where near as much as a pod kit. So google for reviews here on reddit for ones your interested in. They're usually pretty honest here.

You do need to rewick them. Some people rewick once a week some people everyday. It's a personal preference. However one pack of these organic Japanese cotton sheets should last you about four years if you rewick every single day. (That's not an exaggeration btw). Wicking isn't hard. You cut a strip about 3-5mm in diamater. peel the outside bits off. Roll it a bit in your hands then put it through the coil. Cut ends off and tuck into the "tank". You don't really need to fluff the ends if it's not an RTA.

Either you drip or spend more on a squonk mod. There's roughly three recommended dual battery squonks (second thread) at the moment. They're bulkier by about 50% to a normal battery mod because there's a bottle for eliquid roughly the same size as a battery on them. Singles pretty good but obviously you get half the battery life...

Personally I just drip though, you have to carry around a bottle of juice with you but hey who doesn't do that anyway. For that you just tip your bottle down your drip tip squeeze and go. Squonks are cool tbh though. If you decide to drip you can obviously use any mod you want as long as the RDA you picked fits on it.

RDA's are a bit more effort. However you use a ton less juice and you actually get that amazing flavour everyone else is talking about but somehow you never seem to taste...

Also you never have to worry about breaking the glass on an RDA, I drop my shit all the time and they're pretty resilient.

They aren't for everyone though, if you cba with the effort, extra weight and bulk compared to a pod system and all that. They aren't rocket science to use though if I can do it anyone can. You also don't really need a full coil making kit either (often it's easier to get them as a set though) and pre-made ones are cheap, bigger and better. You need a few parts. A coil jig is useful for when you insert your prebuilt coils. ceramic tweezers because when inserted you need to strum your coils to get rid of hotspots. Scimitar Tweezers because you too should accidentally stab yourself with the bastards like the rest of us and they're good for wicking. Wire cutters to cut the ends off your coils once installed. Oh and a pair of scissors to cut your cotton. You can get those cheap as chips on Amazon or on fasttech.

As said it's a bit more effort but you'll save a fortune in buying coils. Using an RDA and bottle shots as a lazy mans DIY vaping costs me pretty much nothing. About 20 quid a month at most. £15 quid on a 500ml bottle shot. About £2 worth or less of the 500ml bottle of 72mg nic (£36 ish) that you can still legally buy (just pinky swear you ain't using it to vape). Then about 1-2 quid worth of PG and VG. That lasts me 1-2 months.

First off, general rule of thumb is to not use anything with "fire" in the name. I'd recommend Samsung's 25r as far as batteries go, and they have a continuous max amp rating of 25 amps which means you can build safely down to .17Ω. You can get them from here for $6.80 each.

For a charger, I would recommend a Nitecore i2 (found most places for <$16).

I used cotton for a while until I switched to Japanese cotton and now cannot go back. Here they are $7.45 for a lifetime supply.

As far as CLOUDS, .75Ω on a mech isn't going to get you very far unless you use a thin gauge wire. Toy around with several different gauges of wire to find out what you like. Also, this is the coolest tool for starting out on mechs before you learn to do the math in your head.

So far I think the gel-cream has been my favorite moisturizer. I tend to get pretty oily throughout the day but it doesn't make me oily but it also hyrdates me well. I use cotten sheet masks to dip into the gel-cream for sanitary reasons and so I'm not touching my face with my fingers directly.

This is Muji Japanese Cotton from Japan. This has very minimal flavor, and if you have a decent strength-flavored juice, then there is not a worry. This is 140 pads. You can obviously cut them, which i do, and can get up to 8 rewicks on dual coils (depending on how big the coils are). I love it and will NEVER go back to cotton bacon for anything but scottish or stovetop wicking. It is awesome. The only 2 drawbacks are that it comes from Japan and that the labeling is all in japanese. IMO, TOTALLY FKN WORTH IT!!!!!

I have tried the Koh Gen Do and Puff and they are very similar, but this is such a good product and a good deal for what you get that it is so worth it.

Also, I run my daily at about 80-100 watts and you can go 2-3 days b4 rewicking, but i do it every day to change harsher flavors. Had them since beginning of February and have barely made a dent. Love it!

http://www.amazon.com/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00MYXSRAQ?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00

These work great, and cheap....

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_2_s_it?s=beauty&ie=UTF8&qid=1468861416&sr=1-2&keywords=Selena+Organic+Cotton

$6.15

or $9.99 for a twin pack

https://www.amazon.com/Selena-Organic-Cotton-Puff-200Pc/dp/B00N7E9YYO/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1468861416&sr=1-1&keywords=Selena+Organic+Cotton

Enough cotton for years....

For Fasttech, if an item is labeled as authentic, it should be authentic. Clones will be named "styled."

Also, for cotton, THIS should last you quite a long while.

I use this cotton. Does not have a bad taste & is easy to wick with. Check the reviews, a lot of vapers use this brand.

Surgical cotton refers to cotton bacon right? And have you tried these: https://www.amazon.com/gp/aw/d/B00O6BO0LY/ref=pd_aw_vtph_194_lp_3/155-8436765-2063562?ie=UTF8&psc=1&refRID=VRAWE5AJ5AXWDBRYRMR9 wondering how the taste is. Seems popular

https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ - Muji Cotton. Literally means no name brand cotton.

These guys. I just throw em in the wash (be sure to put them in the mesh bag, they're small and can get caught under the agitator). Pretty soft too!
https://www.amazon.com/dp/B078N4R8LH?ref=yo_pop_ma_swf

I asked a similar question recently. Some of the info I received was:

Wire - http://www.wireandstuff.co.uk/products/index.html (26g Kanthal seems to be the best place to start)

Cotton - http://www.amazon.co.uk/Cotton-Labo-Organic-Puff-200Pc/dp/B000TCD51A

I think RDA wise (particularly on a budget) I'd heade to www.fasttech.com/ and look at some velocity clones or something like the Wotofo Sapor or freakshow. They seem to be relatively well liked - and cheap!

The wiki that /u/Dumbgecko mentions above is invaluable - lots and lots and lots of very, very, very useful information.

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_5_s_it?s=beauty&rps=1&ie=UTF8&qid=1457493551&sr=1-5&keywords=cotton+labo+puffs&refinements=p_85%3A2470955011

Sure thing. http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/

Next time you buy cotton.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1419018859&sr=8-1&keywords=japanese+organic+cotton

If you want to get into squonking, just know that there is more of an upfront cost involved. You can always go cheap, like with the Pico Squeeze and Kangertech Dripbox but those are not the greatest. I would recommend the HCigar Inbox. It is a 75w DNA device that uses a single 18650. Stick with regulated mods for now. For attys I'd recommend going with the Wasp Nano. For the price its great, squonk compatible and it is single coil so it's great to learn on to build with.

• HCigar Inbox - $68
  
  
• Wasp Nano - $12
  
  
• 2x Sony VTC5A - $7 per. The VTC5A is my personal choice as it is a very good for high wattage and mechanical mods. If you want a touch more batter life go with the Samsung 30Q
  
  
• LUC 2 bay Charger - $20 I'd reccomend the LUC over nictecore because they can charge the batteries faster. There is also a single bay charger but the dual bay is nice for when you may get a dual 18650 mod in the future. Your choice.
  
  
• Any pre-built wire from Advanced Vape Supply - $12-15. Would recommend regular clapton SS316L wire. SS316L is great as it heats up faster than A1 or Ni80 so it doesn't require as much power. Plus I think it brings more flavor to the table.
  
  
• Puffs Organic Cotton - $5 and it will last you well over a year
  
  TOTAL: about $132 before shipping
  
  Note: stay away from the predator, alien, and gen 3 RX!! There are POS.

http://www.carolinaxtract.com/ - http://www.vaperstek.org/ - https://www.nudenicotine.com/

In that order because you never want to cut corners on nicotine ever. Everybody talks about the pepper taste but I've never had that because I went through those three. Nudenicotine actually will give you a free 15ml sample with $2 shpping.

With PG/VG they are 99% all the same so don't get trapped into any gimmicks or anything. Just get the Essential Depot's PG/VG from Amazon which is around $10 for a quart.

While you're there you might as well pick up some cotton which like PG/VG don't fall into all the BS because it's all pretty much the same. Get: https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/

If you don't have Prime and need something to get the free shipping you might as well pick up the scale now: https://www.amazon.com/American-Weigh-Scales-LB-501-Digital/dp/B005UGBG20/ -- Those 4 are what the majority of us use by a mile. Just pick up some pipettes and bottles and you are actually pretty much 100% set for DIY, it's that easy. By the time an average person rolls their coil and wicks their tank I could bust out a gallon or 3 of e-juice.

http://www.bullcityflavors.com/ - http://www.ecigexpress.com/ - http://gremlindiy.com/ - You're all set now.

I've been DIY for a year now and still have 1/4th of the VG and 3/4th of the PG left doing around a 65/35 VG/PG mix. The cotton is a different story however, that bag honestly will last about 7 years which is conservative and 10+ wouldn't shock me. It was probably my best purchace ever and it's so nice to never have to worry about cotton again so I can focus that energy on buying way way too many vaping hardware and supplies. My pantry is pretty much dedicated to vaping and I have to admit that I'm an addict.

It's a fun hobby coming from a background where I was building 386's as a kid so it's up my alley and it saved my life. I don't care care about the death part but more of my lungs hurting when I wake up, had no energy and killed any cardio to the point of running up stairs was an issue. The worst is the smell though, especially if you haven't been around it for a while. I let somebody smoke two in my apartment a few weeks ago in the open and not out the window. My F'N GOD, for the next 3 days I was spaying so much shit, washing every damn thing that was washable, to even scrubbing my walls because I couldn't even sleep waking up in the middle of the night with that distinct sweet horrible smell that lingers like crazy.

How they are legal compared to other things that actually will improve your health to the point where it will actually shrink cancer tumors in THC/CBD. Dextromethorphan and Ketamine which is the only thing known that helps with my rare intolerable disease. Tryptamine drugs like DMT that would instantly reshape how society thinks and acts being the best method for us to grow as a species which could take tens of thousands of years still and it should be our #1 goal in life to get the ball running in our little Century.

Puff - Japanese organic cotton pads

I use these organic Japanese cotton pads. Perfect price & the flavor is clean. I find one pad can make 4 wicks for 3mm coils.

I bought 2 packs 2 years ago & am only half way through 1 bag!

Well, that's easy! Just need some cash and I will guide you to the rest. Okay, istick30- http://www.eciggity.com/eleaf-istick-30w-battery/
that will replace your evod. Also, if you don't want to mess with an atomizer go with but a solid vape-http://sweet-vapes.com/apvs/joyetech/joyetech-egrip-20-watt.html

Okay, if you are currently rocking an evod...I will make the assumption that you would be new to rebuilding(which is making the coils, instead of buying prebuilt ones...not meaning to over explain but if you are new, I just want to inform you).
You will need to watch some videos on how to build coils- https://www.youtube.com/watch?v=SfuOOgOvjL4 (also a solid review of the Taifun GT2)
Then you need to purchase the Taifun GT2- https://www.fasttech.com/product/2047800

You will also need 28 gauge kanthal A1- http://www.amazon.com/Kanthal-Gauge-Wire-32mm-Resistance/dp/B00JVXVKB0/ref=sr_1_2?ie=UTF8&qid=1422333395&sr=8-2&keywords=kanthal+a1

And I suggest japanese cotton-http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=pd_sim_misc_8?ie=UTF8&refRID=0JSXYVNPVVYFJVCYDTZ0

And if you are going this far, get the best juice- http://www.stasheliquids.com/collections/drippers-paradise/products/my-sweet-one?variant=928219087

So search youtube for Taifun builds-https://www.youtube.com/results?search_query=taifun+builds

Then replicate-
And if you need some help- let me know and I will build some coils and send them to you pre-wicked...but I would suggest just going for it...tweezers...scissors...drill bit around 1/8in or just get a shitty set and you are good.
Remember- idiots build coils all the time...https://www.youtube.com/watch?v=cDz0otQmSH4

Building is super easy especially with a coil master it's very simple to learn and also saves money in the long run! This was where I got my coil master. Along with the wire as well as this cotton . Best cotton ive ever used and will last me at least a year and a half. I got it in January and I rewick often and have only used probably 1/10 of that bag. Also Steam Engine has been recommended to help with knowing the ins and outs of ohms. But I personally have done it enough to know what build does what without using this site much. Hope I could help!

Good info! Also consider Shiseido cotton pads for about $10:

http://www.sephora.com/the-makeup-facial-cotton-P173726

http://shop.nordstrom.com/s/shiseido-facial-cotton/2935650

http://www.amazon.com/Shiseido-0446125933235-Facial-Cotton/dp/B00020E1P8

http://www.saksfifthavenue.com/main/ProductDetail.jsp?PRODUCT%3C%3Eprd_id=845524446378151

Yep, there is also the Puff brand cotton, if you cant get the MUJI in France for some reason. Basically, just make sure you have Japanese Organic Cotton. Also, watch videos on the Scottish Roll wicking technique. Such a beautiful way to wick.

wire cutters, ceramic tip tweezers, pointed-curved needle tweezers (helps with cotton), cotton, wire (round or clapton), Coilmaster jig (not needed but incredibly handy), and cotton cutting scissors.Just to help you out even further ill link to specific items that are of quality and are cheap.

Wire cutters: https://www.fasttech.com/product/1243300-plato-170-flush-cutter-for-rebuildable-atomizers (3$)

ceramic tip tweezers for squeezing coils: https://www.fasttech.com/products/0/10005391/2134901-vetus-heat-resistant-stainless-steel-tweezers-for (3$)

needle tweezers : https://www.fasttech.com/products/0/10005391/1431601-vetus-stainless-steel-tweezers (1.50$)

cotton (puffs, labo): https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1467837978&sr=1-1&keywords=cotton+puffs (6.50$ for like 200 sheets or something)

coilmaster jig: https://www.fasttech.com/products/0/10012320/3721500-coil-master-v3-6-in-1-e-cigarette-wire-coil-winder (7.50$)

alternatively you can spin your own coils with this jig: https://www.fasttech.com/products/0/10010836/1986902-vaping-coil-winding-jig-tool-for-rebuildable (2$)

cotton cutting scissors : https://www.fasttech.com/products/0/10002881/1215700-precision-stainless-steel-thrum-scissors (1.50$)

wire-cutters: https://www.fasttech.com/products/0/10003258/1243300-plato-170-flush-cutter-for-rebuildable-atomizers (3$)

pliers: https://www.fasttech.com/products/0/10003268/1244207-wlxy-mini-professional-long-nose-pliers (3.50$)

Remember when ordering from fasttech either use e-packet or DHL unless you want to have to wait like a year to get your stuff lol. You can also get wire from fasttech however I would Strongly suggest getting all your wires from Lightning Vapes, they have very high quality stuff for cheap also their premade 26x2/36 fused clapton spools are phenomenal. Hope this all helps sure you can just buy a builders kit but know you will be paying about 15x the amount you would if you just bought them separately however it is definitely really convenient

sure fused Claptons are great! but thats gonna ohm out very low in dule coil, 0.3ohm to 0.2 mabey lower, can your mod/battery handle that? if the answer to that is im not sure... dont do it!!! first go read more about ohms law and battery's . i dont want you blowing your mod up ;)

ok time for many links

TOOOOOOOOLS!

hook nose/needle nose tweasers for wicking

ceramic tweezers for coils

more ceramic tweezers these ones come with a coil jig!

wire cutters you need to get flush cutters so you can trim as close to the deck as posible

coil jig

alternatively you can go for a tool kit with everything in this one is legit good and even comes with some wire and cotton, the other cheaper versions like the ones i own are knock off's of this one and while usable are just not as good.

WIRE!

ok so your all jazzed on fused claptons but as its your first builds that may not be wise so here are some options, remember the lower the number the bigger the wire and therefore the lower the ohm.

kanthal 24g plain kanthal nice thick gauge good for beginners!

clapton 26g thin higher ohm clapton

clapton 24g thicker lower ohm clapton

fused clapton 2x24g big huge super low ohm fused Clapton, looks kinda funky but thats just how premade fused comes, i usually spin mine in a drill with pliers to take the twist out and make it easier to wrap.

staple wire incorectly labeled as alien this is staple/faltpton wire also super low ohm, its stacked ribbon wire with a Clapton around it

WICK!

fast cotton

cheap cotton

ok so theese are the same cotton almost exactly the difference being the fast option will get to you sooner, the cheap option is a huge bulk amount for a vastly reduced price but it will take a while to get to you like maybe a few weeks.

once you've got all that shit together its time to coil n wick.

coiling is easy so i wont cover that.
wicks can be a little tricky

1. take a cotton pad and cut a 4-6mm wide strip following the groove in the cotton,
   
   its important to have enough cotton to be snug in the coils ( to help it stop burning and wick enough juice otherwise dry hits)
   
   but not enough to jam up the wicking holes in the deck stoping the juice flowing up and giving you dry hits ... its a fine line
   
   
2. remove the top and bottom lair
   
   
3. roll it into a tube between your fingers
   
   
4. pinch the end and roll into a point then insert it into your coils
   
   
5. trim the ends
   
   
6. prime the wicks and coils with some juice
   
   
7. push them down into the wick holes
   
   jobs done vape on!
   
   hope this was helpful if you have any other questions go nuts
   
   i actually really enjoyed this youve kept me sane through a very long shift at work ;)

Hey man, here's what I use and the pretty basic needs:

get yourself a coil building kit, makes things much easier: Here

That will give you all the tools needed as well as some kanthal wire.

I suggest purchasing more wire though, gives you the freedom to find your favourite gauge: [Here] (http://www.wireandstuff.co.uk/products/Kanthal-A1-Type-Wire.html)

You will also want some cotton, [this] (https://www.amazon.co.uk/Cotton-Labo-Organic-Puff-200Pc/dp/B000TCD51A) stuff is the bees knees but takes forever to deliver from japan. So pick up some cotton in the mean time, I like [this] (http://www.vapeclub.co.uk/rda-rta-tanks-coils/fiber-freaks-density-no-1-cotton-blend-pads.html)

Then all you will need is your juice!

Well I buy them on Amazon. $5 per 200. That's 2.5 cents per sheet. They are charging 200 cents per sheet. That's 80* the purchase price. Or 8000% markup. And here they are: ORGANIC Cotton Makeup Puff, Medium https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_cp_apa_eWI4xb1H2CABT

I use this cotton. I've been on the same bag a little over 2 years. I've given plenty to friends and family for both vaping and other purposes and still have about 1/4 bag left.

Overall looks fine and fair prices.

I would skip the cotton bacon and just get https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_2_a_it?ie=UTF8&qid=1539029394&sr=8-2&keywords=puffs+organic+cotton

I'm still on my first pack from years ago. It is a widely known and used cotton by tons of vapers and the price can't be beat.

The battery, we recommend you only buy your batteries from one of the trusted sources just due to so many counterfeits being out there. This is either illumn, li-ion wholesale, or imrbatteries. The Sony VTC6 is a good choice though. Even if you end up spending a few more dollars total, your safety is not the area you want to skimp on.

Longest lasting vs price? For the sheer amount and what seems like a never ending supply: Labo Puffs Medium Organic Japanese Cotton Pads for less than $7

I only do vertical coils in my Kayfun, and life has gotten a lot easier since I got this:

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A


You cut a strip off, peel that apart so it's the right thickness, and slap it together. Easy mode and this stuff wicks very fast. Max VG gets sucked right up, it doesn't bead on it, nor does it need to be massaged in like I had to do with cotton balls.

The strip: http://imgur.com/lnsw9vS

All right! http://imgur.com/6YNq0iS


You can go all the way around with one piece like I did here, or for lower ohms that need extra fast wicking with a bit more of a buffer you can do two strips in a 'C' shape where both ends of one strip are in one well and the other strip's ends are in the other well.

If you're like me and nowhere near any stores, I like Muji 4-Layer Cotton, $6.80 for 60 pcs; and Daisan 5-Layer Cotton, $7.61 for 80 pcs. If I need smaller puffs I use Cotton Labo, $9 for 200 pcs. As I understand it though, the Shiseido ones are well worth the expense.

this is what i use.

Does the job, super cheap and loads of it. Shipping might take a while, but im very happy with it.

The Tip can be replaced with the Titanium tip. that is it.

You can vape hash, just need to buy some organic (Japanese?) cotton or some degummed hemp to put below your hash so it doesn't drip or melt down into condenser.

Only the top of the M and the Cap get hot, but they cool down extremely fast (especially the Cap), and after a few mins you can easily get the cap off with your fingers.

It is definitely worth a purchase imo. Is very efficient and easy to use. Just love mine.

I will weigh in on this. I use RTAs almost exclusively. I do also use 2 RDAs on squonk mods, and 1 sub ohm tank. I use the sub ohm tank at work becuase it is cheap and discreet in its vapor production. As for time it takes to rebuild a RDA or RTA? I can do most anything with dual coils in about 20 minutes without cleaning it for a flavor change. Rewickling can take about 5 minutes. I also tend to have my rebuild stuff at the ready though. Until you get the practice in to rebuild it will take you longer, but I also tend to rebuild while I am catching up on TV shows or just before bed. If you are still interested in rebuilding continue reading below.


For the beginner RDA user I would suggest starting with some cotton pads, and wire from Lightning Vapes (can't link to them because reddit is dumb at times). Other things you will need are some micro screwdrivers, and or a coiling jig for building coils on. Start with a gauge of wire around 28 or 26 ish.

For a beginner tank I would say get a Pharaoh or Pharaoh Mini from DigiFlavor. Both are easy to build and wick with a single coil. No messing with dual coils on these, and you can go from near mouth to lung to Cloudchaser if you want.

For an even easier, but not a tank, option would be the Mesh Pro by DigiFlavor paired with some mesh wire from Lightning Vapes. I use the ss 316L 0.37 ohm per foot mesh with it and end up at about .1 ohms. Go higher if you want, but this thing is a flavor beast, and I have no idea why more people don't recommend it. I can rebuild it in about 5 to 10 minutes depending on level of distractions I get.

The last resource I would tell you to use is steam-engine for making coils. You can go from as basic as a single wire spaced to crazy dumb build that can take hours to make with that site. It also includes 5 other calculators that may or may not pique your interest.

If you have any questions about any of what you just read just ask here or pm me. I suspect you will as I dumbed this down to the absolute basics to give you a frame work to go off of.

(P.S. I do not endorce, or even like Rip Trippers. I actually loathe him for the most part. The only thing he ever got right were the 2 RTAs I recommend you, but I think DigiFlavor had more to do with the design than Rip will ever admit.)

Rayon is awful. It tastes synthetic.

As for Japanese Cotton, thats the way to go.

Here u go sir: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1418408422&sr=8-1&keywords=japanese+cotton

Amazon for a lifetime supply of cotton for under 8 quid.

Cotton Labo:
http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1421215396&sr=8-1&keywords=cotton+labo&pebp=1421215398276&peasin=B000TCD51A

The non add-on version

Cotton Labo from amazon is what I have been using lately.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1421523992&sr=8-1&keywords=Japanese+cotton

A good set of small screwdrivers, some sort of wire cutters, cotton, and a good pair of tweezers (preferably with ceramic tips)

Here's another link for it:

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?m=A23BMDV6UOKQGP&s=merchant-items&ie=UTF8&qid=1480823916&sr=1-1&refinements=p_4%3ASelena

Shipping on this one is not free ($2.99), but it ships from California. Can get it much faster if you need to. Their storefront also has a two-pack option for around $10 plus same shipping as the $5 pack.

My roommate and I order the two-pack and split it. We both really enjoy this one, and with 200 pieces per bag it'll last us quite a long, long, time.

a spool of 28g and a huge bag of puff cotton should only run you $10-$12 on amazon.

http://www.amazon.com/100ft-Kanthal-Resistance-Gauge-Lengths/dp/B00MW4V484/ref=sr_1_1?ie=UTF8&qid=1452887986&sr=8-1&keywords=28g+kanthal

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_2_a_it?ie=UTF8&qid=1452888021&sr=8-2&keywords=puff+cotton

I use the puffs cotton on amazon for wicks.
http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1452779631&sr=8-1&keywords=puffs+cotton

I just use this stuff, really cheap and works well:

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1449103413&sr=8-1&keywords=organic+japanese+cotton

I don't own an Aromamizer so not sure what works best. Even if I did you could prefer something else so it's just trial and error really!

I would recommend a roll of 24 gauge (0.51mm) Kanthal A1 and something a bit thinner, I like 28 (0.32mm) because it's still easy to work with. You would use the 24 for lower ohm builds (example) and the 28 for slightly higher (example) builds. Also notice how the heat flux changes with the different wires on that page.

For cotton this is still what I would recommend. I personally don't believe the $20/sheet prepackaged vaping cotton adds much to the experience at all but ymmv. Another option is cellucotton or Rayon but I've never used it.

Here's a wicking guide for the aromamizer and a good way to 'make' your wick.

Some tools that everyone should have: kuro koiler style tool and a thing to poke with.

Just remember that with dual builds (the aromamizer can't do single coil I think?) both coils have to be identical.
There's no real best setting or build for anything, it's all about what you prefer so just get building and figure it out as you go.

Oh and watch a bunch of coil building videos on youtube if you haven't yet. Figure out how to avoid hot spots by dry burning and pinching them and all that.

If you still have the subox for a few more days maybe have a go at the rebuildable head that came with the kit.

I always build with 26g kanthal, I use about 1/3 width of one of those square pads of cotton. I peel off the top and bottom layer of the pad, fluff it out a bit, roll it up and twist it into the coil.

For the coil, I've been building a twisted coil at 3mm ID about 6 wraps. Depending on how much I twisted, it usually measures out between .5 and .7 ohms (my current coil is sitting at .60 ohms).

Can't say I've never had a dry fire, but they happen so rarely I never think about it (I'd say probably when I've gone far too long without rebuilding/rewicking)

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_3?ie=UTF8&qid=1426377028&sr=8-3&keywords=organic+cotton

Non-mobile: http://www.amazon.com/dp/B000TCD51A/ref=mp_s_a_1_1?qid=1425565506&sr=8-1&keywords=japanese+cotton&dpPl=1&dpID=41Y1EJZVyxL&ref=plSrch&pi=AC_SY200_QL40

^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?

No, but this is what I use and highly recommend.

Haha its all good man. Cotton is cheap, buy a big bag it'll last you a lifetime. http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

$5, last you like a year

Lol. The reason to use organic cotton is because of bleach. Whatever. Tastes like sock too.

This is what you want:

http://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1_a_it?qid=1457048231&sr=8-1&keywords=puffs+cotton

no but i have experience with this http://www.amazon.co.uk/gp/product/B000TCD51A/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

and it's good stuffs.

I use these! Comes with 200 pads.

Labo Organic Puff

Seconding what /u/OhVictoria said, japanese cotton is the bees knees. Don't feel stressed to get Koh Gen Doh though, found this brand that's just as amazing for half the price and about double the amount.
http://www.amazon.com/gp/product/B000TCD51A/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A2Z0B461VOHEF4

I've used both as well, and agree the taste is the same. But at least for me, the japanese cotton was more convenient as it's easier to portion out and keep the fibers aligned correctly so I use that. But not expensive ko gen doh or whatever. I use this, and I expect that bag to last a very, very long time.

you have to make sure they aren't treated with anything. get these ones instead: https://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

This is what many users get/use. I got the MUJI cotton last time because I would have had to wait on the other to get in stock, but I was going out of town and couldn't wait.

My RDA suggestion for easy builds:
Tobeco Velocity RDA - $18
Kuro Koiler (I use 3mm) - $7
Clapton Wire (26AWG + 32AWG kanthal) - $9
Puff Japanese Organic Cotton - $6

Amazon is your friend.

http://www.amazon.com/gp/aw/d/B00JVXVKB0/ref=mp_s_a_1_2?qid=1422324544&sr=8-2

100' 28g Kanthal $6 (I use 26g on my subtank, but 28 works too. This is just the first one that showed up)

http://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1?qid=1422324636

More Japanese cotton than you will know what to do with $8

http://www.amazon.com/gp/aw/d/B00FZPDG1K/ref=mp_s_a_1_1?qid=1422324748

Angle cutters, not needed but it makes getting a clean cut very easy $5

http://www.amazon.com/gp/aw/d/B004800I6Y/ref=mp_s_a_1_18?qid=1422324973

Precision screw driver set, also not needed but handy for both the fact that they are in fact screw drivers and that you can use the slotted ones for wrap coils with a consistent and known inner diameter. $8 (you can get this for a lot less at Walmart, Lowes, harbor freight... Etc)

So a little over $25 shipped and you will not need kanthal or cotton for a very long time.

https://www.amazon.com/gp/aw/d/B000TCD51A/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8

Check out the reviews

You'll get it eventually. Every RTA has it's little nuances that you have to figure out. Cotton is cheap on Amazon for a ridiculous amount of it and you can clean your coils easily by dry burning them. Just keep re-wicking it until you get it right.

That's a good choice, if a little pricey. I go with the organic japanese cotton pads from amazon, they're basically the same thing and you get a huge amount for very little money.

https://www.amazon.com/Cotton-Labo-ORGANIC-Puff-120pc/dp/B000TCEXOS/ref=sr_1_10_a_it?ie=UTF8&qid=1483651315&sr=8-10&keywords=japanese+organic+cotton

More like Ko Gen Don't!

$5.06 for 120 ct shipped from Japan, or $7.15 shipped from USA.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-120pc/dp/B000TCEXOS?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

https://www.amazon.com/COTTON-Organic-Cotton-Large-Pound/dp/B000TCEXOS

It's just basic Japanese organic cotton but it has little no break in time. 5 bags for 25 dollars will probably last you a decade. I haven't used it since pod systems became a thing but back then it was all I used. In the 3 years I drip I probably bought 3 bags but I re wicked 3 times a week.

Since people started switching from silica wicks to cotton, I have used this: https://www.amazon.com/COTTON-Organic-Cotton-Large-Pound/dp/B000TCEXOS/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1504163011&sr=1-1&keywords=puff+organic+cotton+large

I've tried all the fancier cottons, but honestly I can't tell the difference other than stuff like cotton bacon or native wicks not having the pieces of husk in them. They all seem to work pretty equally as wick, and the Cotton Labo is cheaper.

Cotton Pads are always the best, inexpensive purchase.

These are perfect for creating DIY masks:

SELENA Multi-Layer Cotton Puff, 80 Count

Link: https://www.amazon.com/dp/B00260T94K/ref=cm_sw_r_cp_api_nVnSAbF87AWW4

They are five very thin, lint-free layers that you can peel apart to your desired thickness.

Kind of the wrong subreddit to post this, would be better suited for /r/asianbeauty or /r/koreanbeauty.

I use the Hada Labo Hyaluronic Lotion (or any moisturizing toner) with peelable cotton puffs or a compressed facial sheet.

Use sterile cotton, not organic. This will last you a long, long time. I've been using that exact product for months and it tastes great.

linkage They sell these at walmart and target by the cotton balls. They're a little bit thicker but smaller around than stridex pads though.

http://www.amazon.com/Koh-Gen-Do-Pure-Cotton/dp/B00EMCGTAW/ref=sr_1_1?ie=UTF8&qid=1406127059&sr=8-1&keywords=Koh+Gen+Do

This sort of won out in his mind over CelluCotton (Rayon) only because the Japanese cotton is organic. Other than that, they were virtually tied.

1st: Koh Gen Do Pure Cotton, 2nd:CelluCotton (Rayon), 3rd: Nick's Wicks - Hemp, 4th: organic cotton balls

Koh Gen Do Pure Cotton-60 ct. https://www.amazon.com/dp/B00EMCGTAW/ref=cm_sw_r_awd_j7Igvb0JTC209

These ones? They don't peel into layers really at all – if you try to break them apart they break apart similarly to a cotton ball. They are incredibly soft though and great for removing eye makeup and nail polish.

Use unbleached organic cotton, usually people go for the pads as they're easy to roll up and trim.

http://www.amazon.com/gp/product/B00MYXSRAQ?keywords=japanese%20cotton&qid=1450707954&ref_=sr_1_5&sr=8-5

That pack will last you a long time.

In terms of coils, your device caps out at 50 watts, so I wouldn't advise anything thicker than 26 gauge wire when you're making your own coils. Anything lower might take a long time to heat up with the power you have available. Make sure when you're building that you use an ohm reader to ensure you say in a safe resistance range. At 50 watts you should be able to get a nice vape out of a 6 wrap 26g dual coil. Watch a few tutorials on youtube, especially if you have a specific RDA/RTA you're looking to build with.

Also WATCH THIS VIDEO before you do ANYTHING.

https://www.youtube.com/watch?v=O3h0ta-L_zc

I've tried a few myself. I've settled for the giant bags of organic japanese cotton that you can get on Amazon. I dont notice a difference in taste. My wallet loves it too.

Edit: https://www.amazon.com/Selena-Organic-Cotton-Puff-200Pc/dp/B00N7E9YYO/ref=mp_s_a_1_3?keywords=puff+cotton&qid=1559191035&s=gateway&sr=8-3

Organic unbleached cotton is the norm for wicking. You can buy it super cheap from amazon in pads on amazon. Doesnt need to be any vaping brand just facial pads. Doesnt need to be boiled or anything just cut thick strips out roll it a bit and put it through the coil. It wont burn as long as the watts you are running are suitable for the coil resistance built and the wick stays wet.

http://www.amazon.com/gp/product/B00N7E9YYO/ref=s9_simh_gw_g194_i2_r?ie=UTF8&fpl=fresh&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=desktop-1&pf_rd_r=0Q3XMVBRRNV822KJFQG2&pf_rd_t=36701&pf_rd_p=2079475242&pf_rd_i=desktop

For all the rayon lovers out there, a 500 foot box of rayon coil can be had for 30 bucks with Prime shipping, dimensions of box are less than 12"x12"x12" as shown in this pic. 44060 is the product number of 500ft Rayon.

For people that have never tried rayon, a 4" strand can be broken down into 3 4" strands to fit a standard dual coil setup. That's about 1500 feet of wicks for coils, and at 4" a pop, that's 4500 wicks for 30 bucks. 150 wicks for a buck. Costs .66 cents to wick. Wicking twice a week, that's a nickel a month. Wicking twice a week, 104 times a year, that's 40 years of wicking.

Edit: This is probably the only reason I love rayon. Comes in a coil, and for less than the price of an RDA, one can purchase enough wicking material to feed a village of vapers for a year. It's fun to have this box, handing out gallon ziploc bags of the stuff to friends like it grows on trees.

This comment is an add on for my last. I ran out of time haha

I suggest the limitless plus over any Genny style tank. Big deck, easy to build, easy to wick, super easy to clean. Has a single coil plug (which I use all the time, I hate dual coils)

For wire https://www.lightningvapes.com/collections/specialty-wire/products/clapton-wire# Clapton wire is the best for flavor. U don't need any fancy shit haha.

for cotton MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 180pcs https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_apa_w1VIxbTBBW5MJ

U can get the coil master tool kit http://www.coil-master.net/product/diy-kit but u honestly don't need it. Most of that shit is for convenience. U can build, set, and remove hotspots with just a screwdriver.

I use this: https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_other_apa_gyj.zbAS7CV6Z. Very cheap and it works great. (Sorry about the link, I'm on mobile)

I use this Muji

Bare minimum you will need: cotton, wire, something to wrap around and something for compressing your coil.

For cotton: I would suggest buying something like this on amazon: http://www.amazon.com/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00VHA3ZXQ/ref=pd_sim_194_2?ie=UTF8&dpID=41cjwcCYTrL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0GR5E3FGJMNV5WKEV7CP

For wire: This will be dependent on your mod and what route you want to take. Does your mod support TC? Do you want to use TC? If yes to both of those questions, you'll have to do a little bit of research on what wire you think you'll prefer. I've never used TC so I can't be much help in that area. If you want to go with classic kanthal, I would suggest starting with 26g because it holds its shape well without being too stiff or too springy.

For a wrap: You can simply use a screwdriver as a bare minimum OR you can use a coil wrapping jig with makes it unbelievably easy but will cost you a bit more. Something like this: http://www.amazon.com/Original-Authentic-Authenticity-Japanese-InnoVaper/dp/B00ZPTE00C/ref=sr_1_3?ie=UTF8&qid=1462901328&sr=8-3&keywords=coil+jig

For compressing the coil: You can use a set of pliers to pinch your coils together when you're positioning your coil but you CAN NOT have them touching the coil when you are pulsing it for even glow. With that said, I'd highly suggest using ceramic tweezers because you can use them while pulsing.

When I started building coils I went ahead and bought an all in one tool kit for convenience like this one if you so desire (though everything listed above will do you fine): http://www.amazon.com/Coil-Master-Authentic-Tweezers-Resistant/dp/B017RX4DJ6/ref=sr_1_1?ie=UTF8&qid=1462901516&sr=8-1&keywords=coil+master

Hope that helps you get started with building coils, feel free to ask any additional questions. For how to wrap coils I'd start with something on youtube like this: https://www.youtube.com/watch?v=hxuE-WE17Fg

Here is the listing. It is very high quality, and is among the best tasting I've used. I bought it after very little drunken research, in a whim. I am very pleased with it so far.

The engine is nearly leak proof, but it is not a particularly good flavor atomizer, you can probably do better. Also, you might want to look at a single coil atomizer, if you're really beholden to the idea of the OBS Engine, look at the Nano, it's the same tank with a single coil deck, which will help you stay around 40-50 watts rather than needing to max out your mod at all times.

You can build your own coils, buy spools of pre-made clapton wire and just wrap them around a post yourself, or buy premade coils, all up to you. I believe Advanced vapor supply and Lightning Vapes are two very solid options for pre-made coils, Demon Killer and UD make coils out of china as well. You probably want either simple clapton coils or fused claptons with that tank, it performs well at higher wattages and the already somewhat diminished flavor will really suffer with round wire. Even if you're buying premade coils you will need to make sure they heat evenly by fiddling with them a bit, most of us recommend using ceramic tipped tweezers as they are non-conductive and you can tweak the coils while you're firing them.

Cotton, Cotton Bacon is a fine option, if too expensive for what it is. I bought this giant bag of generically packaged organic cotton pads on amazon, they are pretty good pads, and it's a near lifetime supply for under 10 dollars.

Watch videos on how to work out the hot spots on your coils, it will help you going forward. It's a pretty straightforward process, but it's going to be easier to see it. Also, you're probably going to want to get a set of coil building tools now, it's just going to be easier to have the right tools on hand, and in general the kits are cheap enough to not squabble over spending a few extra dollars now to have everything you need later. Make sure that it comes with good flush cutters and ceramic tipped tweezers, beyond that a good coil jig will be helpful now for seating your coils and a godsend later if you're building your own.

I would also recommend looking into other RTAs, whether it be the Serpent Mini, the SMM, or another option there are going to be ones that are just as good for your purposes while providing better flavor at the same general price point.

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

this giant bag of generically packaged organic cotton

---

^^i'm ^^a ^^friendly bot

I use these! If you really want to push it, you might be able to get three uses out of them.

velocity / muji cotton from amazon, $8 for life

I like Muji better. A bit thicker than most other pads. No weird tastes. Wicks beautifully. Tastes great.

https://www.amazon.com/gp/aw/d/B00VHA3ZXQ/

Muji has a few retail stores in New York and California. They'd sell it for the same price as online.

You can buy a pack from their online store for $2.50. Lowest shipping option is $5.90, so you're looking at $8.40 for a pack shipped.

Amazon sells a pack for $7.76 shipped, from Tokyo. So you'd be better off ordering from Amazon if one pack of cotton is all you need, and you don't mind waiting.

If you're ordering more than one pack or ordering something else along with it then buy straight from Muji. They have the same cotton in a larger size too. They have tons of cool stuff. Their shirts and bed sheets are really nice too.

I use them straight outta the box, but they're the pink box from White Rabbit so it's girly and elegant as heck yo.

Edit: Mini review and link.

amazon link

They aren't the softest or the roughest cotton ever. Pretty middle ground as far as softness goes. No weird chemically scents. They don't fall apart or leave little bits of fluff behind (which is why I actually like medium softness cotton pads better than the soft-as-a-cloud types). I do need to use a softer touch than with some other brands I've tried but otherwise, they work well for diy masks, applying toner, and makeup removal. Most importantly the box satisfies my vanity without me actually having to go buy a different container then having to refill it(I'm lazy okay). The adorable pink box contains 200 pieces so bonus I only have to rebuy like 2 to 3 times a year.

I'm a big fan of the White Rabbit ones.

This stuff. I'm really happy with it so far. I got the Vulcan a couple months back and I've used maybe 4 or 5 pieces so far, and that includes ones I've wasted on coils that I didn't like or changed out after a day or two for whatever reason. I use a little more than half a piece per dual coil setup and it works great.

http://www.amazon.com/gp/aw/d/B000TCD51A?cache=9cb1983981507ffde3dd9f3702154403&pi=SY200_QL40&qid=1414390401&sr=8-1#ref=mp_s_a_1_1

is anyone using
http://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1

Do you use the first layer?(the tougher outer layer)

I bought this stuff on Amazon and it works great. So much cotton.

I get wire from lightningvapes.com and cotton from Amazon. There is a brand a lot of people recommend, I don't recall what it was, but the one I got is http://www.amazon.com/gp/product/B000TCD51A

https://www.amazon.com/gp/product/B000TCD51A/ref=ox_sc_act_title_1?smid=A1MAVF6IIZI4HQ&psc=1

$6.40 and free shipping for several years worth of cotton pads.

Other places have it a dollar or so cheaper, but they ship from Japan and it takes about a month to get it. IDK where the seller I linked is from, but their shipping estimates lead me to assume it's in California.

I have always gone with this. I have always had good luck with it. Nice and fluffy especially if you use the Scottish roll method. Pretty low break in period too

For wire i usually go to and for cotton i bought this awhile back... delivery took awhile but worth the wait

Replacing the cotton wick in the atomizer head.

Most of the time, you're replacing the entire $2 atomizer head when all that's wrong with it is the cotton has gotten dirty or burnt. With the CLR coils (which is really the atomizer head, and contains the coil), you can easily replace the wick with fresh cotton at a fraction of the cost of an entire head. It's a very simple process, and takes just a few minutes at most. (FYI: This is pretty much a lifetime supply of cotton.)

Another advantage is that you can build your own coils if you like. A single CLR head could easily last over a year with frequent re-wicking and occasional rebuilding of the coil.

This is the one I got

Interesting. I can get a 100' spool of 26 guage Kanthal on Amazon from Lightning Vapes here for $5 + free shipping. The SAME THING on Lightning Vapes' web site is $7 + Shipping. Is there any reason that I should order direct from them as opposed to going through Amazon?



Also, would this be good cotton to wick with?

Amazon, http://www.amazon.com/gp/aw/d/B00PQ1AQCU/ref=mp_s_a_1_4?qid=1427825357&sr=8-4&pi=AC_SX110_SY165_QL70&keywords=28+gauge+kanthal+wire+lightning+vapes&dpPl=1&dpID=511NP-6hPzL&ref=plSrch

http://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1?qid=1427825586&sr=8-1&keywords=japanese+organic+cotton&dpPl=1&dpID=41Y1EJZVyxL&ref=plSrch&pi=AC_SY200_QL40

About 5 spaced wraps of 28 gauge, 2.5 mm diameter should be about .5
Sorry on mobile.

I got: http://amzn.com/B000TCD51A
Seller: Tokyo Japanese Outlet

Got it in 3 days (Not Amazon Prime Avaliable)

But yeah great cotton, gonna last me a while.

I have been using Puffs for years with good results.

COTTON LABO Organic Cotton Large Puff, 0.23 Pound

https://www.amazon.com/COTTON-Organic-Cotton-Large-Pound/dp/B000TCEXOS/ref=sr_1_5_s_it?s=beauty&ie=UTF8&qid=1519245326&sr=1-5&keywords=Cotton+Labo+Organic+Cotton

The W6 is a bit wasted on an MVP2. You'll only realistically be building single coil setups until you get a more powerful device, so all those extra posts are just kind of going to get in the way.

Even with the 15% off coupon you still end up paying a premium on everything there.

If you don't mind waiting a week or two for epacket shipping from FastTech, plus a couple of things from Amazon, you can get a lot more for less money.

1:1 Stainless Stillare clone - $11.15 from FastTech, including wide-bore drip tip

TEMCo Kanthal A-1 30ga 100ft - $5.65 from Amazon

120 sheets Japanese organic cotton - $9.74 from Amazon.

That's $26.54 total. That leaves you enough money to toss in a good mech clone to your FT order and pick up a couple of high-drain 18650s from wherever, completing the setup.

I also highly recommend picking up a pair of flush cutters like these which are absolutely indispensable when rebuilding.

Tools: Coil Master kit - all the tools you'll need to get started. The coil master jig itself is great and those scissors are really sharp, I've been looking for more of them to buy as backup and to leave around my house/car for various needs. But seriously, just buy that kit. All the tools in it are good quality and I use almost all of them every time I do a build. You can also find it on Amazon for a slightly lower price. The only tool that I use all the time not included in that kit is this screwdriver for the hex bits.

You'll want to get wire and cotton, no word yet on whether those will count as a tobacco product, but you can stock up for cheap, I've started buying from Lightning vapes via Amazon, hard to beat a 250ft spool for ~$10. Get some Nichrome (NI80), Kanthal and Stainless (SS316L).

Start with 24 gauge kanthal and 26 gauge nichrome and SS. Get 50-100 feet of each - it's cheap and will last a long time. Use Steam-Engine's "coil wrapping" tool to figure out how many wraps and what diameter you'll want, for example if I have 24ga Kanthal, dual coil, and I want around 0.5 ohm resistance and 2.5mm diameter, it says I should do 12 wraps. Reality might differ a bit, but it's a good guideline.

As for cotton the 3 most recommended ones are Koh Gen Do, Muji, or Puffs. I've been meaning to try Rayon as well - yes, that's really the stuff you want to buy. Almost everything marketed to vapers is a gimmick and is often the same products as these, repackaged and marked up. Any performance difference won't be worth the price.

You're probably going to want a new mod since that 40 watts won't be enough for most RDA builds. There are always tons of threads here about the best mod and batteries. Basically for 18650 batteries you can only trust LG, Sony and Samsung batteries, and there are many fakes. Two trusted vendors are IMRBatteries and Illumn. I wouldn't trust vendors selling through Amazon, or Chinese vendors. They aren't always selling fakes, but the risk is higher and there's less recourse if you do get fake batteries. You should also get some spare battery wraps and positive terminal insulators to have on hand in case you tear one of your battery wraps. In a few months, those too may be regulated as tobacco products.

Chargers are often overlooked, I think the best you can get right now is an XTAR VP4. People also like the Nitecore D4. Both will show you your batteries capacity and charging status and let you adjust the charging current, and will stop charging the battery when it is done. The VP4 has independent charging slots as well so there's no risk in mixing different batteries.

Everything you need to know for building has been explained better than I could, visually, countless times on YouTube, just look up videos explaining how to build coils on RDAs. Once you start doing it, it gets relatively easy. It requires a lot of patience and can be frustrating at times but it's also satisfying because once you've made some beautiful coils you get to enjoy the fruit of your labor.

I played around a bit tonight, I think the most important thing is not packing it too tight since it has some distance to wick. I've been using this cotton which is this stuff on Amazon and half the price of koh gen do Japanese cotton that everyone raves about. Compared to my previous walmart and walgreens cotton balls, this stuff has zero taste from the first vape and wicks really well. My first two builds I was a little overzealous with packing, tonight I put in just enough to barely fill the gap between the center post and the triple 30ga BicknDalls coil, and it is absolutely awesome. I have 6 different filled builds on my desk and have been vaping nothing but the cats all night. Thanks again!

Seems I can't either right now. I'm on my phone though, which makes it much harder to navigate amazon.jp for some reason.


I have bought these before as well and I really like them. Cheaper than the Muji ones, but same good quality and they are also organic.

Here you go

These work great: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-120pc/dp/B000TCEXOS/ref=pd_ys_sf_s_rp_a1_3_p?ie=UTF8&refRID=17WA6RXCHJAS8F8YA6ZQ

I always buy from Amazon, but a branded produce like this:

https://www.amazon.com/gp/product/B00VHA3ZXQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

or this

https://www.amazon.com/gp/product/B000TCEXOS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

$4 on amazon You don't need to boil the organic ones, thats the normal bleached cotton balls. Thats just product placement and i feel bad for 2 for a dollar. I dont know what 1000ft vs 80ct would be haha. But i've maybe used 10 in the last 6 month because you get so much unrolling them.

https://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0

https://www.amazon.co.uk/SANEK-Cellucotton-Beauty-Coil-BT42251/dp/B001BKY3B0/ ?

sally beauty supply. or amazon..

cellucotton.

http://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0/ref=sr_1_1?ie=UTF8&qid=1414428120&sr=8-1&keywords=cellucotton

http://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0/ref=sr_1_1?ie=UTF8&qid=1419911642&sr=8-1&keywords=cellucotton+beauty+coil

Prices look like they've gone up since the summer. If there is a Sally's Beauty Supply near you, they sell it too. That's where I got my 500' box for $13.

Selena cotton puffs separate cleanly and are resilient enough that I can use a single layer to wipe my face without any tearing!

I have sensitive skin and rosacea. The only physical exfoliation my skin truly handles are these cotton puffs for applying toner or micellar water. I use chemical exfoliation only. Even konjac sponges and super gentle microfiber cloths proved to be too much physical exfoliation with daily use. I double cleanse - I use an emollient cleansing balm followed by CeraVe hydrating cleanser. I don't follow up with the cleanser if I don't think I need to that day.

I love [these] (https://www.amazon.com/SELENA-Multi-Layer-Cotton-Puff-Count/dp/B00260T94K) for doing DIY toner masks. Each box contains 80 squares, and each square splits into 5 thin stretchy layers

I buy these ones from amazon

I never have and likely never will boil my cotton. AFAIC, boiling (using distiller water) at best, is going to make no difference.

I've tried numerous types of cotton......CVS Sterile Rolled, CVS Organic Balls, RiteAid Sterile Rolled, RiteAid Organic Balls, Wallgreens, ect.

I settled on the CVS Organic for a long time, but about a month and a half ago, I picked up these http://www.amazon.com/U-S-Cotton-Sterile-Absorbent-500-Count/dp/B003FBKBA0/ref=sr_1_1?ie=UTF8&qid=1396433348&sr=8-1&keywords=Sterile+cotton+balls

They are AMAZING! Very little cottony (?) taste. No nasty peroxide taste like some. And I find that the wick actually holds up better (I can easily go 3 full tanks between swapping wicks as opposed to 2 with the old cotton.

They're small, but I get 4 wicks out of each. I can't recommend these cotton balls enough.

This applies to nofap, but wrap it in this tape. Then take a pen and write your current number of days on it. You can write anything else on it if you'd like.

It really does make it pretty hard to fail.

PROTIP: get some cotton makeup pads and stick and peel off cotton to cover the adhesive of the tap. Otherwise you'll have a bad time.

Great list!

I just wanted to add, make sure the witch hazel you're getting is alcohol-free. I make bath and body products for a living and have found that most drug store brands of witch hazel are alcohol distillations, which can irritate skin and slow healing time.

*also, soak some round cotton pads like these in the witch hazel and throw them in the fridge. Saved my life after I had my first!

http://www.amazon.com/gp/aw/d/B00EMCGTAW

If you don't even know what the coils are made of, chances are you haven't been brought up to speed on coil resistance and battery safety. You don't mention what kind of mod you're using, but if it's a mech, get a vape shop to help you figure things out before you blow your face off.


That said, here are some things you will need eventually:

• Ohm reader (critical to avoid injury from too-low resistance)
  
• 28 guage Kanthal wire
  
• Cotton balls (organic, sterile, whatever), rolled cotton, or japanese cotton or rayon.
  
• Tweezers and a small screw driver set
  
• Nail clippers or small wire snips
  

Honestly I've bought puff and mugi off of Amazon and probably have enough cotton for atleast 2 years for under $30. If I had bought them in a B&M I probably would have spent quadruple that for 1/3 the product..... Honestly it's vape companies jacking up the prices on a dirt cheap and readily available products that makes me hate the industry some times...

YES!!! Mine too. So much cottony goodness! I got these :D

If you are not completely all for rayon, I'd suggest Japanese cotton.
I bought these 4 or 5 years ago and not even 1/4 way through it

https://www.amazon.com/Selena-Organic-Cotton-Puff-200Pc/dp/B00N7E9YYO/ref=sr_1_3?keywords=japanese+cotton&qid=1571150095&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&s=beauty&sr=1-3

2nd AVS for wire needs, but never buy cotton from a vape retailer.

I bought a 2pack of this and it's lasted me 3 years or so. Way cheaper than what you'll find at a vape vendor.

EDITED: link

Using an Alien with a Goon and SS 316L claptons, core 26 gauge and wraps 36 gauge with 6/7 wraps at 3mm diameter. Tons of vapor and flavor. Only downside is that it goes through tons of liquid. I also think simple 24 gauge SS coils are great, and still produce a good amount of vapor and flavor.

I don't really like the bridge posts on the Goon-they provide a ton of space for building, but it takes me way longer to make sure a build is just right because it is so easy to jostle a coil out of place when everything is unscrewed. I think velocity style decks are way better for building on, but that's just me. However, the positives of the Goon make up for that issue, and it is my daily use RDA.

Here is the cotton I use: https://www.amazon.com/gp/aw/d/B00N7E9YYO/ref=pd_aw_sim_194_2?ie=UTF8&psc=1&refRID=7WBX7QXC21Q5SP3EJHZY

http://www.amazon.com/gp/aw/d/B00N7E9YYO/ref=mp_s_a_1_1_a_it?qid=1457729654&sr=8-1&keywords=puff+japanese+cotton&pi=SX200_QL40 This is what I use and it's pretty great!

I'll just leave this here, The cotton is great, I havent had any issues and its 11 dollars for 400 pads... eyea

I have some Japanese cotton I got off Amazon, but so far in the 12-14 times I've rewicked I've only ever used this stuff from VapeWild. I got a bunch for free in one of my orders so I figured why not use it. Any idea what it is? It says "Japanese Organic Cotton," but it looks nothing like the stuff I bought on Amazon. It seems to work pretty great, and it's much higher quality than whatever cotton ships in the box with various RDAs/RTAs.

I bought this and it is practically a lifetime amount of cotton for me.
Amazon Cotton

Here's the two pack version

3¢/sheet vs $1/sheet @my local B&M

SECTION | CONTENT
:--|:--
Title | Vaping Coil Winding Jig Tool
Description | Fasttech Vaping Coil Winding Jig Tool for Rebuildable Atomizers https://www.fasttech.com/p/1926001 stainless steel / 1.5mm + 2.0mm + 2.5mm + 3.0mm + 3.5mm sections SKU 1926001
Length | 0:01:17


SECTION | CONTENT
:--|:--
Title | UD Coil Jig V3 - Demonstration
Description | UD Coil Jig V3 http://www.vapetime.co.uk This is a quick demonstration of the Coil Jig V3 by Youde Technology. For more information please visit: http://www.vapetime.co.uk/ud-coil-jig-v3/ If you have any questions please do not hesitate to call, contact us or leave a comment. We are always happy to help :)
Length | 0:04:00


SECTION | CONTENT
:--|:--
Title | Quick and Effective coil build for RDA atomizers
Description | ::EDIT:: It's a good idea to check your resistance ( ohms ) BEFORE you attempt to glow and fiddle with your coils. The resistance will change as your coils get more even. So check before, then check again after. Thanks. Hey everyone! If i'm being 100% honest. I mostly shot this video for my brother who recently got into the world of rebuilding. He was really struggling with it. Rebuilding has become such second nature to me that I often forget how it feels to be building for the first time and that sense of frustration that sets in quickly. So hopefully some other people will find this video helpful. Rebuilding honestly just takes practice and patience. ANYONE can do a solid simple build that will produce both great flavor and large clouds ( if you want ) The build in this video came out to 0.3ohms, which will work great on a mech mod, or on a higher wattage regulated device like the Sigelei 150w or iStick 50w I used 24g Kanthal, 6 wraps around a 2.5mm screwdriver. Below I have links to most everything I used in this video. Including some "beginner friendly" RDA atomizers. Precision screw drivers http://www.amazon.com/Stanley-66-052-6-Piece-Precision-Screwdriver/dp/B00009OYGV/ref=sr_1_1?ie=UTF8&qid=1435336275&sr=8-1&keywords=precision+screwdriver+set&pebp=1435336344707&perid=1M11EBNKQ3Z63A7B0VQ8 Wire Clippers http://www.amazon.com/Hakko-CHP-170-Stand-off-Construction-21-Degree/dp/B00FZPDG1K/ref=sr_1_1?ie=UTF8&qid=1435336368&sr=8-1&keywords=Wire+Clippers 24g Kanthal http://www.amazon.com/Genuine-Lightning-Vapes-Kanthal-Resistance/dp/B00JWYIHLY/ref=sr_1_1?ie=UTF8&qid=1435336391&sr=8-1&keywords=Kanthal&pebp=1435336399204&perid=0Q2SHF5N87Q64YJT5F9E Organic Japanese Cotton http://www.amazon.com/Japanese-Organic-Cotton-Organic-unbleached-Largest/dp/B00P219C5Q Unfortunately the VapeKit has been discontinued. They are doing a V2 kit, but in the meantime check this one out http://www.coil-master.net/product/diy-kit Some good RDA's for new builders IMO Mutation X V4 http://www.vapordna.com/Project-Sub-Ohm-Designed-Mutation-X-V4-RDA-p/psmxv4.htm The Mako http://www.beyondvape.com/store/import-cat-c-1_2/beyond-vape-mako-rda-p-1927.html The IMP http://www.empiremods.com/product_p/youdimp.htm Thanks so much for watching everyone! hope this is helpful. Feel free to follow me on Instagram http://instagram.com/grimmgreen/ Twitter https://twitter.com/GrimmGreen Facebook https://www.facebook.com/GrimmGreen Also please remember that unless you make it so I can reply to you. I will be un-able to reply to your comments.
Length | 0:22:32






****

^(I am a bot, this is an auto-generated reply | )^Info ^| ^Feedback ^| ^(Reply STOP to opt out permanently)

Put a big glob on a piece of organic unbleached cotton and it will act like a wick inside the oven. If you're really lazy you could just throw it on some weed or some vaped bud.. but don't do wax by itself it will melt into places it doesn't belong.

https://www.amazon.com/gp/product/B00PBF8PAG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

This is a lifetime supply box but they have smaller ones for much cheaper.

https://www.amazon.com/dp/B00VHA3ZXQ/


There ya go. I saw that comment last night, had my gf order it since she's got prime.. Was only 3$.. Haha

http://www.amazon.com/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00VHA3ZXQ?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00

http://www.amazon.com/Graham-Professional-Cellucotton-Beauty-Rayon/dp/B018IYY3I4?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00

I've been wicking with those cotton pads and rayon for a while and I haven't died yet / think they both work well.

http://www.amazon.com/Ball-Bearing-Swivels-Size-230lb/dp/B00ROFQXSM?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00

If you want to make claptons and have a vice (or want to rig up something to hold the bearings in place maybe with clamps on the edge of a table or something) in your work space you can keep the other end of the wire straight (while allowing it to rotate) with bearings, they help a lot, i think i have size 5. Just a thought, not a necessity.

Also consider 28g kanthal as well. It's pretty nice for twisted builds, and even a simple coil with a 3mm id and tons of wraps (like 12 to 14) has a lot of flavor from all the surface area. 26 is nice but I think it's a little warmer and has a little less flavor for me. I use 26 in some atomizers with more airflow though since the 28 can sometimes be too cool (I like 28 in a velocity though.. well I have some 27 as well I actually like that size but since the 28 seems to be my favorite for twisted I thought I'd recommend the 28).

I broke my coil master coil set tweezers (think the tips got brittle) and just replaced them instead of the tips with these and they are nice and flat and work well (and look cool)
http://www.amazon.com/Authentic-InnoVaper-Precision-Ceramic-Tweezers/dp/B018QRVWU0?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_search_detailpage

for pads koh gen do, or muji?

Edit:

http://www.amazon.com/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00VHA3ZXQ/ref=sr_1_2_a_it?ie=UTF8&qid=1462721224&sr=8-2&keywords=muji

http://www.amazon.com/Koh-Gen-Do-Organic-Cotton/dp/B00NU3H3KE/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1462721242&sr=1-1&keywords=koh+gen+do

Stay away from any "vaping cotton", especially if it has "premium" and or "competition" slammed all over it.

Grab some Muji or Puff organic cotton from Amazon or any other store that has it for dirt cheap.

I use BioDerma "sensibo" with the pink cap.

this one

And I use it with these:

Japanese cotton squares

No clue why the BioDerma seems to be sold out everywhere. Huh I may have to switch when I have to repurchase. I got mine on Amazon but it seems to be sold out there too. Weird.

Yep, building your own coils is great. I have pre-built coils for travel but make my own for everyday vaping. Getting one of these jigs makes it dead simple. Also some of these pads for your wick. It's all a bit upfront for the setup but pays for itself in no time.

Not sure what to recommend as a beginner friendly RDA, I have limited experience with a great many of them, so I'll leave that for someone that has been around a bit longer.

Whatever RDA you get, do yourself a favor and order extra post screws and o-rings for it. A lot can happen in 5 months, and it would be a tragedy if your new RDA is unusable because you lost a screw.

As far as gear needed, the three most essential, IMO, are ceramic tweezers a coil diameter jig, and flush cutters. <--- these are links to the ones I have. Maybe get a backup tweezers or two, ceramics can break, and they're cheap.

Since you will be isolated for awhile, you're going to need a good sized bag of cotton(I like Puff brand japanese organic), and coil wire, obviously!

Get yourself a spool of round wire of whatever coil material you prefer, 24 gauge is a pretty good size for simple round wire builds. You can usually get 100feet+ spools for a few bucks.

You can also get spools of pre-made claptons and such, I really like the ones from Advancevapesupply, and 15 feet of clapton wire goes a long way. I'd still recommend getting round wire as well, even if you order these.

You're going to inevitably have some bad builds, need to rewick many times before getting it right, so plan accordingly. Coil wire goes a long way, but cotton can go quick, a bag like this will last you more than 5 months, and is cheap https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ

nah. wire is extremely cheap (get a variety of common gauges), cotton wick is cheap too. this plus a pair of wire cutters is all you really need assuming you already have scissors/screwdrivers/etc

Hey dude, thanks for your interest. Put simply - if I were paying eight bob for five coils on the combo, I'd feel thoroughly ripped off :)

In my head - tanks like the baby are perfect for people who want minimum fuss, but drippers like the combo are perfect if you want to save money and vape -exactly- the way you want to. I'll admit that building coils can take some getting used to, but there are so many products out there to help you with that.

https://www.amazon.co.uk/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=sr_1_1_a_it?ie=UTF8&qid=1480017983&sr=8-1&keywords=muji+cotton

This bag of cotton plus a few spools of wire will easily last you for a long, long time. My coils tend to last a couple weeks before I want to change them (not including re-wicking the cotton, which I might do three times over a coil's life).

Spools of wire are, obviously, pretty cheap too. About a fiver for three metres on crazywire, or if you're not fussed about ordering from china gearbest sells wire too, which I've not had problems with.

So yeah - if you're interested in building, I'd steer away from RTAs and toward RDTAs - home made coils are cheap as anything, and I personally think the vape is far nicer anyway and definitely worth the time spent learning how to make coils. :)

Hey guys, for xmas I bought my wife a Smok g-priv, big baby beast tank, and a bunch of different flavored liquid including that 1,400ml deal for $75 the other day on here.

Long story short she loves it and has gone from a pack a day to only smoking one cig in the morning. That is HUGE for me and I am so proud of her. Anyways I want to double down and start myself as well. I have been watching a lot of rip tippers and plan on getting the smoant battlestar. But I really get into hobbies when I start them and would really like to get an RTA for mine and the equipment needed to make some really nice coils. After all my research I was leaning towards the merlin mini because people say it is easy and has great flavor. After trying this new Capone flavor on my wife’s vape I love it and I want more. The problem is I can’t find it in stock at Element Vape and I would preffer to use the same place for everything unless there is free shipping somewhere that does not take forever. Anyways now that the story is over here are my questions.

• Is this everything I need to start building coils?
  

1. Cotton
   
2. Wire
   
3. Coil Masters Kit v3
   
   

• Anywhere I can get the Merlin mini for a good price/free shipping and it will not take 10 days to get here?
  If not what is the next best tank. I really want a RTA because dripping constantly sounds horrible. It does not need to be single coil but from what I hear that is better for flavor and flavor is what I want.
  
  
• anything else I need or am missing? I plan on getting 2 LG HG2s.
  
  Edit: Formatting
  

I've never built on the Cledito but do yourself a favor and buy Cotton like this. So cheap.

I have that same bag of cotton. I've used cotton bacon and geek vape cotton, but this cotton works the best for me. It's really fluffy and wicks very nicely. Plus you get a shit ton for very inexpensive. $7 on amazon with prime

https://www.amazon.com/gp/product/B00VHA3ZXQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
EDIT: Not available until January 7. Still an excellent deal.

UK
US

I know this doesn't help now but it's cheap and lasts for ages.

If you vape very sweet juice, coil mileage will vary.

Also "vape brand cotton" is a racket. I currently use [this stuff] (https://www.amazon.com/gp/aw/d/B00VHA3ZXQ/ref=mp_s_a_1_1_a_it?ie=UTF8&qid=1520516984&sr=8-1&keywords=muji+cotton&dpPl=1&dpID=41kG7p1kSUL&ref=plSrch). "Un-bleached organic" is what to look for.

Edit: I promise I'm not selling anything. That link is only to reinforce a point.

Are these the ones?

https://www.amazon.com/Shiseido-PV647359-Facial-Cotton/dp/B00020E1P8

Where do you buy them from? I wonder how the Muji ones compare, since those are quite a bit cheaper.

These right here are all you need [Shiseido Cotton Facial Pads] (http://www.amazon.com/Shiseido-0446125933235-Facial-Cotton/dp/B00020E1P8)
Shopper Drug Mart sells them for 11 bux. Cut the pads lengthwise in quarters, separate at centre to expose cotton, essentially rolling the strip over on itself and wick your coil.

Ohm reader:
http://www.eciggity.com/eleaf-digital-ohmmeter-voltmeter/

Ceramic tweezer: it makes getting hotspot easier with a torch
http://101vape.com/accessories-/415-ceramic-tip-tweezers.html

Cotton pads: Pricy up front but I love it and KGD is nowhere to be found
http://www.amazon.com/Shiseido-0446125933235-Facial-Cotton/dp/B00020E1P8/ref=sr_1_1?ie=UTF8&qid=1413476869&sr=8-1&keywords=shiseido+cotton

Wire cutter: I prefer this over using nail clippers
http://www.amazon.com/Hakko-CHP-170-Maximum-Cutting-Capacity/dp/B00FZPDG1K/ref=sr_1_1?ie=UTF8&qid=1413476778&sr=8-1&keywords=wire+cutter

24/26/28 Guage A1 Kenthal: This should last you for a while
http://www.amazon.com/Genuine-Lightning-Vapes-Kanthal-Resistance/dp/B00JTGYS40/ref=sr_1_1?ie=UTF8&qid=1413476842&sr=8-1&keywords=kanthal+26

Limitless over the Avocado. IMO, another option would be the Uwell D2. It's rebuildible and I can't get it to leak.

https://www.fasttech.com/products/0/10029525/6465502-authentic-uwell-d2-rta-rebuildable-tank-atomizer
The Limitless classic can be converted to a RDA if sometime later if you get the RDA bug

https://www.fasttech.com/products/0/10021170/6107504-authentic-ijoy-limitless-rdta-rebuildable

You can get pre-made coils from FT, But get the cotton from Shoppers drug mart Example https://www.amazon.com/Shiseido-PV647359-Facial-Cotton/dp/B00020E1P8

>When buying premade coils is there any you can suggest that are best for flavor?

If you plan to buy a tank, you can only buy the coils that are made for that tank. Smok and Pico would be fine. If you want to try building or having a show show you how to build, you can buy premade Clapton's coils. Doesn't really matter too much what brand. Pay attention to the suggested Wattage though, as different sizes will mean different sweet spots.

>Also what cotton is the best and/or cheapest?

The best is Japanese cotton. They're actually cotton pads that other people use for makeup removal and other skincare stuff. The kind you want is unbleached. This is a common one. This will last you months, if not years.

Something a little pricier is Cotton Bacon, a brand specifically made for building vapes with. I have no idea if it's worth it, but good vape stores will carry it.

>Sorry for all the also's but also would you recommend buying online or in a shop? I tend to be pretty impatient.

Stores: Pros: Are able to offer lots of juice suggestions, and you don't have to wait. They have weekly deals and membership programs. Cons: More expensive, don't always carry what you want.

Online: Pros: Don't have to leave your house, are much cheaper, have more variety. Cons: They have to check your age, which can be a pain online. It takes a few days to a few months depending on where the store is located (check shipping times).

If you buy a tank, just buy the coils online because you don't need to choose different coils. It will be the same one every time, so just buy a lot.

This is just excellent

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

I use these: https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A?ie=UTF8&*Version*=1&*entries*=0

I don't know if it can be your issue, but I quickly found that if I don't leave the bag sealed well, the cotton would taste absolutely horrible for a good little bit. I wouldn't say it tasted salty, but it definitely tasted wretched.

More a money saver and better vape then fun tbh, look at it this way. You can buy a pack of premade coils, say 5 for 10 bucks, or buy a 50-100 ft roll on SS wire and a bag of cotton for 10-15 dollars and make 100's of coils.

Wire

Cotton pads or cotton bacon(My preference for ease of use).

All you need besides that really is a screw driver like this and a pair of nail clippers.

You can get an ohm meter but I always just check it on the device, some people are against this but ehh...never had an issue in 2 years of building, just make sure it's in your devices ohm range.

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

The Coil Master V3 jig/wrapping kit/tool/thing is really great. I've thoroughly enjoyed mine. MyVaporStore has it for only $12; great shop, ordered from them plenty and never had a problem. No need for trying to size out random screwdrivers; it has 1.5mm to 4.0mm posts ready to go.

Any little wire snips from the local hardware store should be fine (fingernail clippers can be used in a pinch). Also some ceramic tweezers are really useful for heating and testing your coils. Most vape shops online sell tweezers.

26 gauge has always seemed like a good go-to wire size for most applications

This cotton is cheap on Amazon and you get a bunch.
http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_search_detailpage

If you really want to save money, see if your tank has an RBA head. It'll take a few times to get used to making your own coils, but once you have it down, the wire is under $3 at the moment, and all the cotton you could ever want costs $6.20. That's easily enough wire and cotton for 200+ rebuilds, for under $10.

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A Here you go man.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

http://shop.nordstrom.com/s/shiseido-facial-cotton/2935650?origin=keywordsearch

Ko Gen Do is just one brand, you can find Japanese facial cotton in other brands as well, and as long as they're 100% organic cotton it's good to go. One brand that I find easier to find and purchase is Shiseido, and it's very similar to Ko Gen Do, the sheet is thiner and the fiber is even more uniform (plus it doesn't have the seed fragments in the sheet).

Best wire to make coils? I'm a fan of Lightning Vapes. If I'm not mistaken it's like $3-5 for 50' of most wire and they (at least used to, I haven't had to place an order in a while so I can't be sure) have free shipping on everything. For cotton just go w/ any unbleached organic cotton. I've been on a Rayon kick for quite some time, but if you'd prefer cotton definitely go with Japanese Cotton. I've used this for the past 2 years or so and it's the tits. Exponentially more product than you'd get from "Cotton Bacon" or any of those other shitty resellers that just repackage this stuff. And probably cheaper than the shitty small packs they sell you.

Has anyone here used Cotton Labo ORGANIC Cotton Puff?

what you need:

• A mod
  
• A dripper
  
• A battery (Sony VTC3, MNKE 20A, LG HE2, Samsung 25R are all good)
  
• A smart battery charger (one that stops charging at 4.2v) I use a Nitecore D2 which is very good
  
• Some kanthal to build your coil 28g is a good place to start
  
• Some good cotton to use as your wick
  
• An ohm reader so you don't overdraw your battery
  
• Small screwdrivers
  
  stuff that is useful:
  
  
• Wire cutters to cut your kanthal
  
• Needlenose pliers for a whole bunch of stuff
  
• Allen wrenches (small ones) or drill bits (small ones) to wrap your coils around
  
• Scissors to trim your cotton
  
• A magnifying glass with a stand (I find this incredibly useful for getting coils right the first time, rather than having to play with them a ton once they're in your dripper)
  
  >making me fear I'm going to explode my face with a poorly built coil or something.
  
  So long as you check your resistance using that ohm meter (just screw the dripper in and turn it on, it'll tell you the resistance), you wont overdraw your battery.
  
  >Also, is this stingray x a good product to start with?
  
  Yep, the stingray is a great mod.
  
  Basically once you get everything watch some tutorials on coil building, wrap your first coil, pop it in your dripper, check the resistance, if everything checks out put it on your mod, wick it, drip it, and vape away.

What coils? I use the Joyetech 1ohm CLR coils. I solved the gurgling by re-wicking them with a thicker piece of cotton. I like to make a wick that is just able to squeeze into the coil, it should be a tight fit. I find that a looser fitting, thinner wick is what causes the popping and gurgle problems for me. When I re-wick it becomes a very smooth even pull. I use this cotton to make my wicks.

I use ORGANIC Cotton Makeup Puff, Medium https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_cp_api_OAjZBb49NKZ03

I got mine here

Yeah, much easier to get a consistent roll going.

I received the same exact note. Those puffs are great, a $12 bag will last you forever. I'm assuming you got these ?

If you chose to go the rebuilding route this is what you need, and some atty suggestions at the end.

You need- wire- http://www.amazon.com/Genuine-Lightning-Vapes-Kanthal-Resistance/dp/B00JVXVKB0/ref=sr_1_2?ie=UTF8&qid=1413428261&sr=8-2&keywords=kanthal+a1

cotton- either balls or pads http://www.amazon.com/Organic-Cotton-Balls-80-Count/dp/B00CD8FCRI/ref=sr_1_6?s=hpc&ie=UTF8&qid=1413428355&sr=1-6&keywords=organic+cotton http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=pd_ybh_5

drill bit set- http://www.homedepot.com/p/Unbranded-Drill-Bit-Set-13-Piece-45110/204590609#product_description

Tweezers- any pharmacy

Disposable butane torch- any gas station

ohm reader- http://101vape.com/meters/170-ohms-meter.html
(most regulated mods have a built in one, but a reliable and exact external ohm meter is very good to have)

rebuildables- tanks- kayfun https://www.fasttech.com/p/1605200 (google some kayfun build tutorial videos, stay under 20 watts while vaping on it)

drippers- magma https://www.fasttech.com/p/1718100
zenith https://www.fasttech.com/p/1770202

(both of those drippers are a good start because you can block 1 air intake and make single coils untill you are comfortable enough to build dual coils)

I own these drippers and that tank. They are the cheapest clones on the market but all work great. Shipping takes 3 weeks, chose first class china e-packet as shipping option

OPTIONAL- coil jig, no need for drill bits, MAKES COIL BUILDING EASY https://www.fasttech.com/p/1878301 (I've honestly never tried this, but I recently ordered one to try out, should have it in 2 weeks)

Get puff organic cotton pads off of Amazon. They're the same price as the fasttech ones, but won't take 1+ weeks to get to you. The bag I bought has lasted over 2 years, and I'm only halfway through it.

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

Edit: If there is a Sally's near you, their Cellucotton rayon is really good too.

https://www.amazon.co.uk/Cotton-Labo-Organic-Puff-200Pc/dp/B000TCD51A/ref=sr_1_2_a_it?ie=UTF8&qid=1543517619&sr=8-2&keywords=ORGANIC+Cotton+Makeup+Puff

UK amazon

I like these so far.

I really have to disagree here. The flavor effects from the cvs cotton can be pretty severe.

I WOULD recommend the cheap, EXTREMELY high quality and easy to work with LABO cotton from Amazon.

Cotton Labo ORGANIC Cotton Puff Size M (200pc) https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_awd_DD5Dub1064X56

I've been building an average of 20 builds a week on this and am not through an 8th of the bags and it's less than $8.00.

It's as good as the KGD stuff, and absolutely a STEAL for the price!

[This] (https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_cp_apa_q-n8yb43MAVBN) is what everyone else buys.

There are a few options:

• You can buy bags of organic cotton balls from your local drug store or Whole Foods for around $4.50 for an 80 count
  
• You can purchase Silica Wick (kinda unpopular)
  
• You can purchase Koh Gen Do or puff cotton (This is what most people swear by)
  
• There's also Rayon, which I prefer to use due to its price and availability
  
• And finally, some vapers are starting to use Hemp Wicks, which offer a slightly woody taste
  
  Hope this helps!

Well you can always try rayon for wicking.

amazon.fr Cotton Labo ORGANIC

I too am looking for an RDA so I have none to recommend. However, I thought you might be aided knowing what else you will need to know and buy when for an RDA:

• For determining the stats of the coils: http://www.steam-engine.org/coil.asp
  
• Kanthal wire: http://www.temcoindustrialpower.com/search.html?&category=Resistance_Wire&n=ADQ.q&c=0002000
  Can also buy from Amazon seller LightningVapes for $7 for 100' spool.
  
• Japanese cotton: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

From what I've heard, a Lemo should be fine. A couple of alternatives though - I use a Kayfun Lite Plus on my MVP2 with excellent results. Also I heard that the Kayfun v4 was just cloned, that might be another option soon. I wouldn't use the Billow on a MVP2, or if so just use a single coil build - dual coil isn't going to work so well.

Regardless of what RTA you use, I'd suggest a 30 gauge wire at 1.7 ohm (6 wraps on a 3/32" drill bit) - this works fantastically on the MVP2. I go with small gauge wire (30 or 32) because of the lower amp limit on the MVP2 for a lower heat capacity (less time to heat up.)

Also, since you are new to building, also take a look at getting some Japanese Cotton to start out with. Take a look at this one, $7.50 and free shipping (if you order over $35, not hard to do this time of year :) ).

To answer your other question, you probably won't have to change your juice. I haven't noticed a ton of difference in that regard on my RTA compared to the Nautilus, at least if you are using the BVC coils. It does however provide much better flavor (at least on the Kayfun Lite Plus, can't speak about the Lemo.) With a RDA (dripper) you would have to think about that, but probably not on a RTA unless you are also getting a battery that can push a lot more wattage.

Also, I'd suggest you take a look at steam-engine. It is fantastic for getting started on building coils.

Edit Ninja edit for more info

$250 is way too much for what you listed, you can get way cheaper than that. Keep in mind you really don't NEED 100W to use an RDA. My homemade DNA30 is great for a cool vape on something with a bit more restricted airflow than the Mutation, but that will still work just fine. I would stick with your current Sigelei 30W until you know for sure you want to upgrade, because that is going to cost you the single most amount of money.

If you want the mutation x v2, grab it here for $30, its worth getting this one authentic and not a clone because its so cheap to begin with and most clones do not have the wide bore drip tip.

Japanese Cotton is what I usually use.

For the rest of your gear, Lightning Vapes has a good selection of well priced rebuilding supplies:

Ohm Meter $14.75

I recommend Ceramic Tweezers $12.95

I mostly use 28ga Kanthal (100 feet for $6.25) with my 30W box mod, with mechs I use lower gauges

I would also find a pair of flush cutters to snip wires as close to the posts as you can, and some nice small scissors to cut your cotton.

OH! Almost forgot, this is what I use to wrap my coils.

As a general rule of thumb, don't buy wire or wick from websites that sell mostly juice or hardware, it will almost always be overpriced.


If you want to get REALLY cheap and don't mind waiting, go check out Fasttech

Amazon is always good in regards to the cotton and wire. You can pick up the coilers cheap on fasttech. For the rda, eciggity probably has what you're looking for. And for a lot of cheap juice with VG options I'd suggest VapeWild. Out of all of those, you'll only pay shipping at eciggity.

I bought this one: http://www.amazon.de/Cotton-Labo-ORGANIC-200pc-japan/dp/B000TCD51A

Shipping (from japan) takes ages, but price and quality is decent.

Amazon.

When I first started out with building my own coils, I used this site to help me with what build I needed.

steam-engine.org

If you're using a tank, I'd suggest building at around 1.0-.5 ohms.

Here's a video on how to build coils.

https://www.youtube.com/watch?v=BBpwZoxG3d0

https://www.lightningvapes.com/ - Nice place to buy your kanthal from. I've been vaping this wire for years now. A spool of a 100 feet would last you just as long. They also sell tools in the site like wire cutters, pliers, screw driver sets and tweezers. Even if you already have those laying around the house somewhere, I would buy a set just for your vape equipment to keep them clean and free from dirt and oil.

http://www.unkamensupplies.com/collections/stainless-steel-wire - If you want to get into the temp control world, I recommend stainless steel wire since it's a bit easier to build with as opposed to ni200 (nickel) and cheaper than titanium.

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1453484639&sr=8-1&keywords=puff+cotton - I bought this bag last April. My gf took half of it for makeup removal purposes and left the half for me to use for vaping. I'm still working on that half. It's a lot of cotton for close to $5.

If you have any questions, just send me a PM.

Edit: Also, I recommend you buy a 4-bay charger for your batteries. Even though it has an onboard battery charger, even the manufacturer recommends you use a separate charger. And marry those three batteries. Meaning charge them together and use them together. Never separate the three.

http://www.amazon.com/Nitecore-Version-Rechargeable-Batteries-Certified-OOPSTEK%C2%AE/dp/B00QF1QT2Q/ref=sr_1_1?ie=UTF8&qid=1453484800&sr=8-1-spons&keywords=nitecore+battery+charger&psc=1

A Tobeco Velocity clone or Sapor would be good starter RDAs. Both can be had very cheap, and are simple to build on. Both also have nice performance. For a "starter kit" I recommend picking up some kanthal from Lightning Vapes, and a kit like this. Edit: also cotton of course

http://www.amazon.com/3pcs-Kuro-Koiler-Coiling-CW-20/dp/B00UWD93QM

Those make the actual coil twisting super easy.

As for cotton

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?s=beauty&ie=UTF8&qid=1451420962&sr=1-1&keywords=japanese+cotton+puff

Is a lifetime supply of the good shit.

As for going through a 15ml every few days. I started ordering big bottles from guys off this list.

https://www.reddit.com/r/electronic_cigarette/comments/3ezao7/the_cheap_budget_bulk_ejuice_liquid_thread/

I have some plume juice right now and it is really good. Plus it is on sale so if your interested you can get a sweet price. http://vapecaviar.com/products/cstd-temptation-120ml-introductory-price?variant=4572955077

Still look and read more but, I hope this helps.

Best bang for the buck

http://vapenw.com/vape-kits/evic-vtc-mini

http://vapenw.com/sub-ohm-tank/black-white-subtank-mini-by-kangertech


http://www.lightningvapes.com/collections/batteries/products/lg-he4-18650-25a-2500mah-icr18650he4-flat-top (use coupon ohmsweetohm for 17% off)

http://www.amazon.com/NiteCore-i2-V2014-Universal-Intelligent-Batteries-Compatible/dp/B009JMDD9U/ref=sr_1_5?ie=UTF8&qid=1451284571&sr=8-5&keywords=18650+charger

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1451284621&sr=8-1&keywords=japanese+cotton

That is the basic kit. If you want to blow some big clouds, look into something other than the kanger subtank on vapenw.com. They have juice there, too.

Edit: The evic mini is a great device, since it has software ugprade, where you can now use SS, Ti, Kanthal, Nickel.

Safe? Yes. Ideal? No. Btw we all vape on cotton here...wtvr the brand is. I found with drug store organic cotton is always popped and was shit but it's "safe." Just get some puff pads or muji.

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A these are my favourite pads. I use Kendo now but as far as pads go these are my favourite.

Here is the desktop version of your link

If you boil it, it'll work. But usually cotton balls aren't the best at wicking because the fibres are mangled, whereas they're aligned and straight in Japanese cotton sheets.

You might want to order that some day : http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1427354753&sr=8-1&keywords=cotton

It'll save you money.

What kind were you looking for, there's Puffs, which seems to work fine for most folks.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

I'm not sure, since my B&M doesn't carry any cotton (at least none on display). Its this stuff and I really like it. I haven't used anything else to compare it to, but it works very well and doesn't have any odd flavors.

buy this pack and look for the wire separately. the pack of cotton I linked will last you a life time where the one in that pack you linked will last you maybe 2 or 3 weeks.

I noticed you using a specific cotton from amazon, but I found this gives you a larger amount of cotton per square cm with this, and it is cheaper also.

Return it and get these instead.

https://www.amazon.com/gp/product/B000TCD51A

Way better value. And work just as well.

And yes, they really do ship from Japan.

$6.15 with 2 day shipping.... https://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1_a_it?ie=UTF8&qid=1466900332&sr=8-1&keywords=japanese+cotton&pi=SY200_QL40

http://www.amazon.com/gp/aw/d/B000TCD51A?pc_redir=1408628145&robot_redir=1

That's what I use. If you order it use prime if you have it only takes a couple of days as it ship from the US if you don't it ships from Japan and takes two to three weeks

These are perfect http://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Pbusardo has a video on his youtube channel testing various wick materials, and the JC had the best performance.

http://www.amazon.co.jp/gp/product/B000TCD51A/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

~$3USD for 200

Ordered this twice
https://smile.amazon.com/gp/product/B078N4R8LH/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

1. You can use compostable bags for picking up the poop.
   
2. There are cotton pads for makeup or you can make your own https://www.amazon.com/Reusable-Remover-Washable-Organic-Cleansing/dp/B07D5XQRFW/ref=sr_1_3?crid=2QHY2A9Y9BHGN&keywords=reusable+cotton+pads+face&qid=1555496851&s=gateway&sprefix=reusable+cott%2Caps%2C253&sr=8-3
   
3. I do not use makeup, once an a while I use lipstick I still have plastic ones but on Etsy, you can find Zero Waste makeup for example https://www.etsy.com/es/listing/199724241/black-vegan-zero-waste-cake-mascara?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=makeup+zero+waste&ref=sr_gallery-1-15&organic_search_click=1&pro=1 but you can find a lot of things, and you can see where they will ship it from so you can choose a vendor in your own country, or at least close by.

I recently purchased reusable face pads and mesh produce bags.

I haven't used the face pads yet because it recommends washing them first (machine wash cold). Some of the reviews claimed that they shrunk after washing but instead of using the dryer I air dried them and had no shrinkage.

I love the mesh bags! It came with reusable tags so you can put the product code for the cashier but I just opened the bag so they could see the produce. Some of the reviews said their produce kept fresh longer, but I recently recieved these and used them only yesterday so I don't know it that's true or not. For wash instructions: machine wash cold, air dry only.

For women: I got these menstrual cups and I feel they work well. If you're new to the cup, it does take practice and getting used it.

I hated plowing through cotton pads, so I bought a pack of these

I've had issues with makeup removing products breaking me out, so I keep it pretty simple. I should mention that I generally don't wear makeup that's difficult to remove (no waterproof mascara, no eyelash glue, no ultra-budge-proof-tattoo-lacquer eyeliner, etc), and I've been trying to limit single-use waste as much as possible.

First I wipe away most of my makeup with a microfiber cloth and some warm water.

Then I use a reusable cotton round and a little Garnier Micellar Water to remove any leftover makeup. If my mascara is being stubborn, I just gently hold the cotton round over my eye for 30 seconds or so to give it a chance to dissolve.

Finally I use CeraVe Foaming Facial Cleanser and rinse with a muslin face cloth.

On special occasions when I am wearing more stubborn makeup, I use a little coconut oil in addition to the micellar water.

**Skin type and skin concerns:**

Main concerns: Dryness, acne (cystic and general acne all over chin and cheeks), and splotchy discoloration all over my face (my dermatologist said it was melasma). My skin is consistently congested and breaking out, yet my entire face is sensitive, dull, itchy and flakey. After years of reading tips here, I've finally gotten to the point where redness and the majority of flaking is gone and products don't burn when they touch me, but my skin remains dull and feels tight.

​

While the products I've selected are relatively affordable, they add up. Plus I'm worried I'm doing more damage than good by overwhelming my skin with all these product. Mostly though, I'm so jealous of all your minimalist routines I see on here, and I want to create one that would work for me. I don't know where to start. What are your thoughts?

​

**Skincare routine with full product names**

AM

1. Wipe face gently with Neutrogena Makeup Removing Wipes
   
2. Spritz face with rose water to re-moisten (currently using Leven Rose Rose Water)
   
3. Eva Naturals Vitamin B3 5% Niacinamide Serum(daily)
   
4. Spritz face with Kikumasamune Sake High Moisture Skin Lotion Tonerbefore skin dries completely
   
5. Moisturize with Neutrogena Hydro Boost Gel-Cream
   
6. Spritz face again with Kiku to keep moist
   
7. Warm two drops of The Ordinary 100% Plant-Derived Hemi-Squalanein hands and pat all over face (I just added this to my routine and I have high hopes)
   
8. Australian Gold Botanical Tinted Sunscreen SPF 50
   
9. Coola Liplux Lip Balm Sunscreen SPF 30
   
10. 1-2 times per week, exfoliate face with Baiden Mitten Exfoliator Glove
    
11. 1-2 times per week exfoliate lips with Hanalei Sugar Lip Scrub
    
    PM
    
    
12. First cleanse with Illiyoon Total Aging Care Cleansing Oil (I'm finishing up this bottle and then I'm going back to using Softymo Speedy Cleansing Oil).
    
13. Second cleanse with CeraVe Foaming Facial Cleanser
    
14. Saturate cotton pad (White Rabbit organic cotton) with Neutrogena Alcohol-Free Toner and gently wipe face and neck
    
15. Spritz face with rose water to re-moisten
    
16. Elizavecca Hell Pore Control Hyaluronic acid Serum(nightly)
    
17. Spritz face with Kiku before skin dries completely
    
18. Moisturize with Elizavecca Milky Piggy Retinol Cream
    
19. Spritz face again with Kiku to keep moist
    
20. Additional moisturizer layer with Mizon Black Snail All in One Cream (I'm sure this is unnecessary, but I feel like the snail cream has done more for me than any other product and I'm emotionally attached to it now lol)
    
21. Warm two drops of TO squalane oil in hands and pat all over face (NEW)
    
22. Hanalei Lip Treatment
    
23. Cover any cystic acne with spot treatment patches
    
24. Once a week, spot treat dry problem areas with Origins drink up intensive overnight mask(it looks like they recently changed the formula for this, so I'm going to have to find something new when this runs out)
    
25. Once a week, spot treat acne problem areas with Proactiv Skin Purifying Mask
    
    ​
    
    **Daily behaviors possibly impacting skin:**
    
    My diet is crap. While I don't eat a lot of processed food, I eat too much sugar, too much oily and fatty foods, too much red meat and not enough vegetables. Because of my family, it's going to be difficult to make adjustments, and honestly I'm not sure where to start. Caffeine consumption is pretty high, while I only have the occasional coffee, I drink a TON of green tea and oolong tea. Water intake is fair, and I usually refill my 32oz water bottle 2 times a day (yes, I have to run to the bathroom at least every 30 minutes). I pretty much stopped wearing makeup a little over a year ago, now I only wear for special occasions and the occasional eye liner.

This is my exact routine as well! I purchased these reusable rounds and I like them a lot. + there are enough that I just throw them in with my towels/undies whenever I'm doing a load of laundry.

https://www.amazon.com/Wegreeco-Bamboo-Makeup-Remover-Laundry/dp/B078N4R8LH

Hi there!

I just wanted to let you know that Automod has removed your comment because it contains an Amazon referral link, which we don't allow in the sub.

Could you please edit the URL so that everything from (and including) "tag=" is removed? Here's the tag-free link for an easy copy & paste:

https://www.amazon.com/Reusable-Remover-Washable-Eco-Friendly-Bambaw/dp/B07MSHTTXY/

If you've done that, please reply to this message so I can approve your comment. Thank you!

What about something like this?

https://www.amazon.com/Reusable-Remover-Washable-Eco-Friendly-Bambaw/dp/B07MSHTTXY/ref=asc_df_B07MSHTTXY/?tag=hyprod-20&linkCode=df0&hvadid=266206201336&hvpos=1o3&hvnetw=g&hvrand=3216841132449281009&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9028784&hvtargid=pla-650642222363&psc=1

White Rabbit cotton pads work great. If you or someone you know have Costco, they are cheaper there right now. You could put them in some kind of cheap BPA-free food container, or even a Ziplock?

this is the exact same stuff should be in most drug store with a cosmetics counter when higher end cosmetics... I use Japanese cotton in my kayfun and sterile organic cotton in my dripper.. http://www.amazon.com/Shiseido-0446125933235-Facial-Cotton/dp/B00020E1P8 in Toronto On Canada $11.99 for 168 sheets

This is the one that a lot of people are referring to. If anything, don't get these because someone on reddit had confirmed that it is not organic.

Nordstroms

Amazon, but sold by separate retailer.

If you're into trying some really amazing cotton, check out the Mavaton's Select from Cottonman -- http://www.cottonman.com/ms.html

For Rayon, http://www.beautyclicks.com/graham-professional-44043-cellucotton-beauty-coil.html is the best price. If you're in the US you might be able to find it locally at Sally's.

For Japanese cotton, http://www.amazon.com/dp/B00020E1P8

For these and other options, check out http://www.reddit.com/r/vapeheads/wiki/guide-new-rba-shopping-list and also the wicking guide -- http://www.reddit.com/r/vapeheads/wiki/guide-wicking

Agreed. I wanted to order everything from one place so I just got the bacon cotton. I'll look into something else. is this what you use? Might have to pick it up

[This](ORGANIC Cotton Makeup Puff, Medium https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_cp_api_itcGybTZA3B31) will last you a lifetime

I second the Cruis 2. I and many others have had trouble getting the SMM right so I wouldn't recommend it to someone new to RTAs. The Crius 2 has been much more forgiving.

Get yourself a bag of japanese organic cotton pads on amazon, it's like $10 for a year+ supply. You're also going to need scissors and tweezers, and flush cutters if you're going to be building coils, or even just installing pre-made ones to clip the extra off the ends. This kit for example

You can look up reviews on youtube for specific tanks to see how to work with it. For the crius 2 for example: 1 2

Cotton
Rayon For some reason it's a ton more expensive on amazon, local stores have it at less than half that price.

> shiseido or KGD

Are these the specific cotton you use?

SHISEIDO

MUJI

100% safe?

That's a great idea, don't know how I didn't think of it. Do you mean these?

Replay links:

streaming

iTunes

direct mp3 download

***

Replay notes:

I need your help.

I am going after the entire e-liquid manufacturing industry. Tons of people making e-liquid are risking your health and rights for profit. The sad thing is, it’s actually easy to eliminate the problem. Most of them just don’t care – about you.

The e-liquids being put out by manufacturers may be toxic, if not to our lungs, then certainly to our rights. Our anti-vaping enemies will take this information and run wild with it. This will lead to vaping use and sale bans across the country if we don't do something to stop it.

It looks like most e-liquid manufacturers don’t care. Some do – but most don’t. They are not going to change unless we force them.

Listen to the diacetyl discussion. Then press the manufacturers to show you lab results. Start with the e-liquids that you buy most often.

Here is an example on how to ask:

Hi xxx,
I have a question regarding diacetyl testing in (insert manufacturer name) e-liquid: can you provide me with a copy of a lab report that verifies that (insert name(s) of e-liquid that you buy) are diacetyl free?
What I'm looking for is something like what this company provides to customers (use Google Chrome to translate the page):

www.nobacco.gr/component/content/article?id=210

As you can see, a copy of the test results from an independent laboratory is available for every eliquid that they sell.

Can you provide me with a copy of the results of a lab test that confirms that (insert e-liquid names) are diacetyl-free?

Thanks,

(insert your name)

If you are able to get a lab report, send a copy of your correspondence with the results to [email protected]

If the company gives you the runaround or some bullshit excuse, let me know at [email protected]

A bunch of vapers call in to share good and bad experiences from ECC.

Russ likes Japanese cotton, a quick review

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=cm_sw_em_r_dp_moqeub1125XG8_tt

Tell your story! [email protected]

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1410078128&sr=8-1&keywords=koh+gen+do+cotton

Bought this it's amazing and cheap. Takes a week or so to arrive from Japan but it's worth it trust me.

Amazon

200 sheets for 10 bucks, free shipping, and I get about 10-12 wicks per sheet. It does ship from Japan though, so it is a ~2 week wait. But they throw in free crazy ass Japanese candy!

is this any different than this stuff?

Better amazon page for this item:

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_4_a_it?ie=UTF8&qid=1510072601&sr=8-4&keywords=puff+cotton

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s01

Bought this in January of 2015, still have about a third left.

Organic Cotton Puff is usually around $5-6.

would this stuff be okay?
https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1467765339&sr=1-1&keywords=puffs+organic+cotton

Obviously be wary when trying to side-step expensive gimmicks with vaping because sometimes expensive stuff is expensive for a reason but if you can source cheap stuff it feels good.

Cheap Jap Organic Cotton 1: https://www.amazon.co.uk/Cotton-Labo-Organic-Puff-200Pc/dp/B000TCD51A/ref=pd_bxgy_194_img_2?ie=UTF8&psc=1&refRID=6BZFJF81ME61QJDF62B2

Cheap Jap Organic Cotton 2: https://www.amazon.co.uk/gp/product/B00MYXSRAQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Cheap Kanthal 24gauge spool:
https://www.amazon.co.uk/Kanthal-A1-Type-Resistance-Wire/dp/B00UYR0JX2/ref=pd_bxgy_194_img_3?ie=UTF8&psc=1&refRID=6BZFJF81ME61QJDF62B2

Cotton Bacon is cheap, give it a shot, but order some of this as well : https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_3_a_it?ie=UTF8&qid=1465891190&sr=8-3&keywords=puff+cotton

The puff cotton is really easy to work with and SUPER cheap. That one $6 bag has 200 pads in it, even if you're scottish rolling dual coils and you replace cotton once a week, you've got about 4 years of cotton there.

If you're rolling a smaller atomizer or not using scottish roll, you're probably looking at 8 or 10 years worth of cotton at least. I know when wicking my Subtank RBA I used about 1/10 of a pad.

I've seen a number of people talk about these cotton pads and they seem dirt cheap. I haven't had the opportunity to use them yet as I still have a bunch of ko gen do cotton that I paid too much for.

Amazon has Japanese cotton which is really cheap for how much you get. I'd say it's around 10 6 dollars for a 100 pieces. Or vapewild has $0.99 cent for 4 pieces if amazon is sold out

Just got an order of Japanese Cotton in the mail. I was using regular cotton before and after eagerly throwing it on my Stillare I can instantly see what the hype is all about. It's made a world of difference in the couple hours I've been using it. I've even tasted some notes in my juices I've never noticed before.

koh gen do is the preferred brand. I ordered this brand from Amazon because Koh gen do is sold out in most places.

For starting off, I'd recommend a Tobeco Velocity clone as it's cheap and easy to build on. The two-post design (Velocity-style) has been copied by pretty much everyone else so you'll be familiar with the deck when you fall further down the rabbit hole.

A coil jig (Coilmaster, Youde, etc.) is very nice to have. The kits are usually a good value as they include an ohm reader, the jig, ceramic tweezers, and flush wire cutters, among other things and all in a handy carrying case. The ohm reader is especially important for your safety so you can tell if a build is shorted before putting it on your mod. The ceramic tweezers are nice because you can play with the coil to get even heating (for contact coils like Kanthal builds) while pulsing it without fear of shorting it or getting a shock.

For wire, 24g or 26g Kanthal is a good place to start for wattage builds. A common build is a single coil 6 wrap 24g Kanthal around a 2.5mm giving a resistance of about 0.5 ohms. The Velocity can handle single coil builds by having the coil set in between the posts as opposed to on one side of the posts. Alternatively, a dual coil 6 wrap 26g Kanthal around 2.5mm gives about 0.37 ohms and is another simple and effective build.

If you delve into temperature control, I'd recommend SS316L if your mod can handle it or has a TCR setting. It's easier to work with than Ni and Ti and you can dry burn it if you want without any harmful effects. It also works in both temperature control and wattage modes in case you feel like switching it up without building new coils. I like to shoot for 0.4 ohms with SS316L, so a single coil 6 wrap 26g SS316L around 2.5mm works perfectly. You can explore other gauges and wire materials once you get a handle for how temperature control works.

For those more exotic wires, twisted and claptons are fairly easy to make if you like to DIY. Otherwise, there are some manufacturers that have premade twisted and claptons on rolls and some have premade exotic coils if you just want to try some of those out. I stick to the simple builds because I mainly run temperature control, but will occasionally throw a clapton into my RDAs for fun.

As for purchasing things, you should be able to find RDAs and coil kits from your favorite vendors. Lightning Vapes is a good place to go for wire. The one thing is most of the wicking sold by vendors are a bit overpriced, considering you can get the same stuff in 150-200 piece packs for like $7-15 on Amazon (Labo/Puff, KGD, and MUJI cotton pads), so keep that in mind.

For resources on building, Steam Engine has nice tools (Ohm's Law, Coil Wrapping, and Wire Wizard) that can help take the guesswork out of coil building. You can play around with the settings to figure out how to build something that meets your needs.

Also, consider watching some Youtube videos and reviews of whatever RDA you choose to get a general idea on how to build and wick it, as each RDA or RTA or whatever may have its own quirks.

tl;dr - Get a coiling kit from your favorite vendor, it'll have everything you need to get started. Pick a wire and use Steam Engine to get the ball rolling. Watch videos specific to whatever RDA you choose for a quick start. Don't worry about the nuances and extreme variety as you'll eventually come across those in time.

You could try this stuff.You just cut strips off and apply gentle pressure to make the piece circular. Regardless, you really need to change the way you're wicking. You can't even see the coils, how do you think air is going to pass by them to create vapor?

> amazon.ca

Price is almost double for the same item from the US site (xe.com says the price = $10 USD), but still a good deal for a quality product, works well, and has no break-in period or 'off' taste:

https://www.amazon.ca/Cotton-Labo-ORGANIC-200pc-japan/dp/B000TCD51A/

Also, if it matters, the famous Daniel from DJLSB uses this cotton as well, but rarely mentions it in his videos.

I like Daniel's vids too. :)

I'd recommend grabbing this. Should be a year or two's worth of cotton.

How often you rewick depends on your vaping habits, it can be anywhere between every couple of days and every couple of weeks. Coils can last a while if cleaned when rewicking. I normally end up wanting to try a new build before my coil actually has to be changed.

https://www.amazon.ca/Cotton-Labo-ORGANIC-200pc-japan/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1517669978&sr=8-1&keywords=puff+cotton

by far the best cotton ive used.

I bought (this)[ORGANIC Cotton Makeup Puff, Medium https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_cp_apa_4LJLAb53SNYY3] for ecig vaping and never managed to run out. It ships from Japan but is well worth it.

What is chados cotton? Looks like generic Japanese cotton to me. http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1416331712&sr=8-1&keywords=japanese+cotton 200 pieces for $8.








I would position the coils closer to each other. You want your air flow to go over the coils. If they are spread out like that, you won't get direct air-to-coil contact on all of the coils... Unless your RDA can do that, which the DH doesn't IIRC. Otherwise, it looks fine to me.

http://www.amazon.com/dp/B000TCD51A/ref=pe_385040_30332200_TE_item

Cotton Labo @ Amazon

I use this, and so far I have been pretty happy with it. It's actually cheaper now. I think I paid $11-12 for my bag.

i use these:

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

For an affordable first mech mod setup I would suggest a Stingray, Penny, Akuma or Nemesis clone for your mod.

Nemesis Clone link

Stingray Clone link

Penny Clone link


As for you atty there are some decent clones out there but one that has been getting popular and is an affordable authentic is the Mutation X.
It's got a deep well and awesome adjustable airflow.

Mutation X Link

Otherwise you could get a clone rda of a plume veil, tugboat, tobh, or patriot.

Then a very important part you need is the battery. Can't go wrong with Sony VTC-5s but they are kind of hard to find nowadays. You may be able to find some but be careful. There are a lot of fakes going around. Some other viable batteries are the Samsung 25R and LG HE2.


and of course you will need kanthal wire (prob 26 or 28) Link, some jewelry sized tools (pliers wire cutters, screwdrivers) Link, organic/Japanese cotton Link, an ohm reader Link and a battery charger Link.

If you have anymore questions I would check out the thread on "What I wish I knew about rebuildables". Here is a Link

I am very happy with my japanese cotton. Sure, it takes 10-15 days to arrive but it's 200 pieces!

I like the sapor. I suck at building (or rather just hate it) and it's easy and quick.

Lightning vapes for wire.

This is the cotton I have http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

I use Puffs. Cheap and reliable pure JOC, no marketing lies.

Nope, I just Googled it. [I use these myself] (http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/).

Hit up Amazon.. Way cheap for way more than ecig vendors will offer... Example but not the end-all-be-all: http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1456817173&sr=8-1&keywords=organic+cotton

I have the nylon tweezers but the stainless would work just as well. It's the ceramic tips that are important. Ceramic absorbs heat really well so if you use them on hot coils they won't melt or leach metal onto the coil.

I get my cotton from Amazon and prefer cotton pads. It's a much better deal compared to Fasttech and you know what kind of cotton you are getting.

Either of these.

• MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 180pcs
  
• ORGANIC Cotton Makeup Puff, Medium

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=pd_ys_sf_s_rp_a1_1_p?ie=UTF8&refRID=0DDEW4AC8NA0NJARMFGZ

I've been using this and I really like it.

This works great, it was delivered fast too: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1413317447&sr=8-1&keywords=japanese+cotton

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1412291136&sr=8-1&keywords=japanese+cotton

now fulfilled by amazon meaning you don't have to wait for it to get here from china

Koh Gen Do pads are awesome, but are practically impossible to find right now. I have a pack of 'Cotton Labo Organic cotton puffs' that I'm loving right now. Get them for pretty cheap on amazon.

Should I go for the large or medium?

I would suggest the SJMY CSMNT clone to try it out. It is 1:1 and the ONLY difference I could find was the non-gold plated deck (SS) and the top cap was much more snug than the authentic. Except that, it was the same vape experience.

Cotton, I use Cotton Bacon but also PUFF cotton pads as backup.

I got mine HERE. I think I've used 2 pads in the last 3 weeks and I've re-wicked a lot of builds.

> labo japanese organic cotton pads

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1417034763&sr=8-1&keywords=labo+cotton+pads

Heres the wicks I like
http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1417213841&sr=8-1&keywords=labo

http://www.rbasupplies.com/READYxWICK.html

I think you're looking for Japanese cotton (unless the Chinese are hiding insanely awesome cotton from us)

This might suit you: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

Not too much into drippers as I don't trust them not to leak in my pocket. If you want a rebuildable tank setup a la Kayfun/Russian, I can wholeheartedly recommend the Squape Reloaded clone by Ehpro. The original is something like $160, the clone is available on Eciggity.com for $40. I picked one up about two weeks ago and I'm still impressed. Super easy to build, quality is top notch - stainless steel + glass, and vaping it is better than any other tank I've used. Juice capacity is LARGE. This isn't something you need a 30W+ device for either, as it's single coil. An MVP2 or iStick would do you fine, as would any of the Vamo or SVD type devices. You will need to buy some wicking material (Cotton Labo has some exquisite organic Japanese cotton for not too much), and some Kanthal (I find that 26 or 24 gauge is best).

These

No, if you add this cotton to your cart, it won't let you proceed to checkout until there's $25 worth of stuff in there.

cotton squares. The cotton is combed so they all face the same way.

Here's amazon prime for a generic brand I know a lot of people use with great success: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?s=beauty&ie=UTF8&qid=1418760028&sr=1-1&keywords=koh+gen+do

After some tests with different cotton brands, koh gen do tastes/performs similar to the ones from puff Amazon link
and the ones from the Muji shop.


Discussed a lot in german vape forums; some say its performs exactly the same - some even think the muji performs better, plus they are cheaper and have a couple of local shops across the word.

Cotton

Wire


Its both in euros btw.

Buy the cotton on amazon, costs a few more dollars gets you 50 times what you are getting in that order.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

If you are getting just kanthanl, not prewrap (those are crap btw), then get yourself a cheap coil jig as well. It'll make wrapping a lot easier for a beginner. And you'll need an ohm reader.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=pd_bia_nav_t_1?ie=UTF8&refRID=0GJQ3GCBSVMCY9ZD1DRX

Better flavor over organic cotton imho

Honestly, the bacon is just rolled out cotton balls. Go to Amazon and search Japanese cotton. Grab a bag of that. YouTube videos can show you how to do it. I would link you to everything but I'm on mobile dropping a Duke.

edit:
cotton

I got some of this stuff with an amazon order, pretty happy with it.

http://www.amazon.ca/Cotton-Labo-ORGANIC-200pc-japan/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1422062885&sr=8-1&keywords=japanese+cotton

Ok, here is the cheapest "good" cloud chasing set up I can think of. I'm not going to include tools, but you'll want to get needle nose tweezers, scissors, a small screw driver set (to wrap your coils on), wire cutters (can substitute them for nail clippers if you want to save money) and potentially pliers.

• Mod: Stingray X Clone. Link: http://www.fasttech.com/product/1795000
  
  
• RDA: TOBH Clone. Link: http://www.fasttech.com/product/1716603
  
  
• Battery: Samsung 25r (use code LV20 on anything from Lightning Vapes to save 20%). Link: http://www.lightningvapes.com/products/samsung-inr-18650-25r-battery
  
  
• Charger: eFest LUC. Link: http://www.lightningvapes.com/products/samsung-inr-18650-25r-battery
  
  
• Ohm reader: Generic ohm reader. Link: http://www.lightningvapes.com/products/cartomizer-and-atomizer-ohm-meter
  
  
• Wire: 24 gauge wire. Can choose between 25'-1000'. Link: http://www.lightningvapes.com/products/kanthal-a1-resistance-wire
  
  
• Wick: Organic cotton. You have some wiggle room here. If you want to save money go to your local pharmacy and get some organic cotton balls. Price ranges from $3-$6 and that should last you a long, long time. A lot of people (including me) like Japanese cotton pads since they are easier to work with and may give you better flavor and wicking ability. Link: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1421292839&sr=8-1&keywords=Japanese+cotton&pebp=1421292845541&peasin=B000TCD51A
  
  Price before shipping and discounts: $92.61
  
  There's a lot of wiggle room in here, but this set up is pretty high quality, easy to work with and once you get experienced you won't get much bigger clouds without getting into high end regulated or mechanical mods.
  
  I'll say it again though: definitely do your research and if you do decide to change some of this make sure you don't skimp on good batteries and chargers.

cotton

wire although 24g is preferred

coil tools you also need tweezers

ohm meter, Mechanical mod, battery charger and rda can all be bought on fasttech or 101vape.

batteries(sony vtc,samsung 25r) should only be bought from trusted sources and i buy mine at a local B&M. so i cant help there.

The necessities are:

• Precision screwdriver set (to use as mandrels)
  
• Organic Cotton Pads (easier to work with than ball cotton)
  
• Kanthal (in assorted gauges)
  
• Ohm Reader (EDIT--added per V's reminder. There may be a better sauce for these, though).
  
  I'd recommend 26, 28, and 0.8x0.1 ribbon to start. That gives you a lot of options for building. You'll notice the first two links are add-on items on Amazon, so you'll have to buy $25 worth of wire, wire cutters, tweezers, or just add it to some other amazon order you're making.

Any one who was late to this post just use what I use. You will have so much for so little.

Its fine. Dont boil it. Use what you need to while you wait on some organic cotton sheets to come in from amazon.

https://www.amazon.com/dp/B000TCD51A/ref=cm_sw_r_awd_5V0Fwb28986TS

You're getting ripped off with that one. Big time.

Puff cotton is way cheaper.

Lightning Vapes has a 17% off code (ohmsweetohm) if you buy direct from their site, which is usually already cheaper than their amazon storefront.

Edit: Okay, maybe not ripped off big time (I originally didn't notice that it came with a spool of wire), but 20 pieces of cotton for $5 is still insane.

i agree with the subtank.
if you're feeling adventurous maybe its time to dive into building your own coils, so you don't have to fork out $15 dollars for a pack of duds =)

http://www.vaporbeast.com/kanger-subtank-mini.html

http://www.amazon.com/Genuine-Lightning-Vapes-Kanthal-Resistance/dp/B00JTGYS40/ref=sr_1_1?ie=UTF8&qid=1449824225&sr=8-1&keywords=lightning+vapes

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1449824236&sr=8-1&keywords=cotton+puff

https://www.youtube.com/watch?v=T8rO6PoMgU4

Cotton, $5.27 with free shipping: https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

50 ft of kanthal, $4.99 with free shipping: https://www.amazon.com/Gauge-Kanthal-Resistance-Wire-0-51mm/dp/B00O4HX2Q4

Ebay and Amazon are usually a terrible place to look for vape stuff, but wick, wire, and tools are exceptions.

here's some cheap japanese pad cotton :

https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1481106333&sr=1-1&keywords=puffs+organic+cotton

tastes like any other japanese cotton. that is, not at all after your 3rd drip or 1/4th through the tank. that bag will last at least a year even with daily rewicking.

wire's important, too. if he's going to tinker with it beyond simple coils you'll want a lot of it.

stainless steel 316 is good because it can be used in both temp mode and power modes. i found this pack of 100ft rolls of differing gauges.. might actually get this myself:

https://www.amazon.com/6pcs-100ft-roll-SS316L-Gauges/dp/B01IQ1JUT6/ref=sr_1_7?s=beauty&ie=UTF8&qid=1481106540&sr=8-7&keywords=ss316l+resistance+wire

Picked up one of these for cotton. Don't think I'll need to reorder for a while:p

Cotton

This stuff is great, have been wicking with it for the last month without issues and awesome flavor.

its been chemically treated and bleached, so not the best option. These are good http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

Sounds like it might be Selena or Labo. Does it look like this or this?

Geez, $111?! I think I paid $21 for mine on ebay but it does seem to have gone up in price.

I like Muji's cut cotton for lotion masks, but right now I'm using these random ones I got from amazon: http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A
I wouldn't worry too much about peeling off 5 layers. Depending on how much wetness I'm willing to put up with, I'll either just use the whole square or tear it in half.

Definitely grab the endless Japanese cotton sheet bag. Like 6 bucks on Amazon. Labo puff cotton.

Here ya go

Edit: $7.69 and its easily more than a years worth the cotton.

Just pick up some off Amazon. They are only $7 and will get to you within a couple of days

Sounds pretty straight forward and like a practice makes perfect type of thing. Are there certain tools needed to rewick/rebuild? I see organic cotton and wire on Amazon for like $7 each, would these work?

http://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_3?ie=UTF8&qid=1449732422&sr=8-3&keywords=cotton

http://www.amazon.com/NTE-Stranded-Hook-Up-Wire-Black/dp/B003N3HC7A

puff cotton

Word! There’s definitely a bit of a learning curve with building RTA’s (at least there was for me), but they lead to a fantastic and more cost effective vaping experience in the long run. These cotton pads on amazon are awesome for rewicking and one package should last you a lifetime. My favorite coils for single coil builds are product # 9646622 on fasttech; they’re SS316 so you can use TC if that’s your jam, and they’re dead cheap, one package has 100 coils!

I’d love to hear how the Krylin treats you, I do love me a single coil RTA.

Thanks for the insight! I'm wondering if I should pick up some Organic Cotton to go with my Cellucotton, might make things easier.

is this the right kind? cause that's a pretty decent price.

I'm using this cotton, which seems to be very well liked. Unfortunately I don't have any straight VG hanging around, but I can say that when I re-wick and use solely the 'nana cream there is definitely no hint of chalkiness. Thanks for the suggestions nevertheless, though!

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1422660127&sr=8-1&keywords=cotton+labo

Or you can buy 200 pads for $8, who the fuck is going to pay over 3x the price of Japanese Organic cotton? All you're doing is buying Japanese Cotton for $8 and dividing it up and selling them for triple the worth using plastic ziplock bags.

Nice try though.

My impressions of the Mini with MAX VG thick juices is that with the pre-built coils they perform fine as long as you dont take long hits. The OCC coils perform well around 22-25W on the .5 ohm coil and the 1.2 seems happy between 14-20W on the 1.2 on my dna 30. "Air Hole is set to wide open" If you are going to use the RBA section, buy yourself a package of japanese cotton like the one here:http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A ; because rayon/organic cotton doesnt seem to wick as well and I've done dozens of attempts trying them to wick without getting dry burning. I have most of my coils at 1.2-1.3 ohm of 28guage kanthal. I have been rebuilding for nearly a year now and tried 26-30 gauge of multiple kinds of coils and all of them work fine in it.

Expect the flavor and throat hit to be more intense and cleaner, it might surprise you. I dont recommend doing anything to the tank other than the standard hot water sanitation and wipe down with a microfiber cloth, my tank has literally never leaked except when I over dripped to pre-prep the coils. You might be dropping down your nic levels after transitioning to the current setup.

Ive nvr used or heard of it b4, but from the looks of it seems like high grade cotton. Though Im a bit concerned about that Japanese cotton u have there, it looks very white and i c no seeds. I use this stuff and love it!

Meh, i change my wick every night, not that big a deal. http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1424945130&sr=8-1&keywords=Cotton+Labo+ORGANIC+Cotton+Puff+Size that's almost a lifetime supply for 7$

I bought it on amazon for like 8 bucks for a lifetimes worth basically.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

pads are easier to work with, simply cut a strip and thread it through he coil, a pack like this http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?s=beauty&ie=UTF8&qid=1427679147&sr=1-1&keywords=japanese+cotton will last you forever....

1a. Maybe start off on 28? I started off there and have tried 24 gauge, but I prefer the 28 because its easier to coil and build. (If you're daring I suggest trying a twisted 28. Good flavor, decent clouds, and juice is easier to deal with since I've found single coil to waste juice a lot more).

1b. Cotton is a little trickier since its your first time building, but I suggest looking around on some videos for tutorials and what not. I suggest Japanese organic cotton, don't have to boil, just wick and wet and you'll be ready. Here's what I use.

1c. This is a great tutorial about ohms and building.

2. Juice is really up to you and how you want it. I've heard that the best for the mini is 50/50? Could be wrong, but look around on /r/electronic_cigarette and there should be some stuff that answer your questions.

3. I suggest starting off on a RDA before you start building for the mini. Get something like the Dark Horse or Plume Veil. (again personal preference)

4. Buy yourself a charger with some batteries that will fit for your istick. Its a lot easier to just interchange the batteries rather than wait until the battery dies and then having to wait for it to charge.

Hope this helps!

Go on Amazon get 200 squares of Japanese cotton for like $8 shipped.
Edit with link
http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A

You could also buy a pack of premade coils for $10 and cotton for $5, and then you wouldn't even need any tools.

Coils - http://www.ebay.com/itm/112036623512

Cotton -
https://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_6_a_it?ie=UTF8&qid=1483996884&sr=8-6&keywords=japanese+cotton

Dual 5 wrap 24g kanthal. That's good for 50w. It shouldn't get that hot. Will come out anywhere between .23 - .27 around a 3mm piece (so allow a bit higer for 3.5) and it shouldn't be eating up cotton man, a non sugary juice and ill rock that for a 3 or 5 days no problem.

Besides, if you're worried about chewing though cotton, you're buying the wrong stuff. Look here one of the few things vape-related I'll buy from amazon. Lasted me about 10 months so far.

Pretty much everything has already been said, I love this stuff though. I'm using the Labo organic Japanese cotton (as it was cheaper) and it's working great. I don't think I'll ever be going back to regular ole organic cotton. And the pads are extremely easy to work with.

Here's a link to where I bought mine, in case anyone is interested: http://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Not likely. You should definitely scrounge up some organic/untreated cotton somewhere. https://www.amazon.com/gp/product/B000TCD51A/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=ALWX5VVJPZEDR

Puffs

Zero complaints, still have a fuckton and don’t need to worry about wasting any pads.

Just thought of something after reading the comments on amazon,any worries about how close its grown to fukishima? Wouldnt want blown nuke reactor lungs lol

Btw is this the 2 puffs one you're talking about?

https://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_4_a_it?ie=UTF8&qid=1467607146&sr=8-4&keywords=muji+cotton

Lightning Vapes for the 24 gauge Kanthal (coupon code is ohmsweetohm for 17% off). These cotton pads from Amazon are dirt cheap and work wonders for myself and many others around here.

https://www.amazon.com/gp/aw/d/B000TCD51A/ref=aw_wl_ov_dp_1_1?colid=ZOFE5MJAM5B2&coliid=I2WW38M5EPIK7X&vs=1

http://www.amazon.com/gp/product/B000TCD51A/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A2VF5ECSCM29EE

http://www.amazon.com/gp/aw/d/B000TCD51A?cache=4bad69adc4cd6a1a97f21732c37a1d4b&pi=SY200_QL40&qid=1408688880&sr=8-1#ref=mp_s_a_1_1

https://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Ordered these based on a suggestion here and they work great. Cheap and it'll last you a long time.

http://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

is cheaper

Correction, 8.50$
Here
http://www.amazon.com/gp/aw/d/B000TCD51A/ref=ox_sc_act_image_1?ie=UTF8&psc=1&smid=A1H1ZJ7OE1XT6R

They're fine. Give them a try and if they work for you, great. There's also these pads sold on Amazon. I personally think the pads are easier to work with. They don't tear apart as easily as unrolled cotton balls.

I bought puffs from Amazon. Organic, not bleached and taste great.

https://www.amazon.ca/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1?qid=1458273515&sr=8-1&pi=SY200_QL40&keywords=puffs+organic+cotton

I first bought shiseido pads from shoppers but found that the puffs lose the cotton taste much quicker than shiseido pads did.

Here's what I got,

http://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00JVXVKB0/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

They're $12 now right here, but I would just go into a fancy makeup store in a mall or something. You can find similar or better organic japanese cotton pads for the same price without having to wait 3 weeks for it to get here from Japan.

i like these:

http://www.amazon.com/gp/offer-listing/B000TCD51A/ref=dp_olp_new_mbc?ie=UTF8&condition=new

I ordered these: https://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1.

If you read the reviews and questions these are popular with vapors. Non bleached, not from a area with radiation. They work very well as wicks for me

https://www.amazon .com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A

https://www.amazon .com/Graham-Professional-Cellucotton-Beauty-Rayon/dp/B00PBGJT5A

These are what I personally use. As for RDAs, I’ve used the recurve, bonza and the hadaly clone I own and a few other non note worthy ones. The recurve and the hadaly (Clone) are absolutely killer for flavor, however I have heard if you’re going to be swiomking that you should use the entheon with the hadeon cap instead of the hadaly as it’s better for squonking. You can easily get a cheap sxk entheon clone and buy an authentic hadeon cap for an experience. Or if you want an authentic RDA the recurve is absolutely killer. I’ve also heard amazing things about the Drop RDA

I buy Labo Organic Cotton from Amazon. If you go down the list until you find the one that's Prime eligible, it ships straight out of an Amazon warehouse in Canada. You can have it delivered in a couple of days.

http://www.amazon.de/gp/product/B000TCD51A

Actually, it was only 6,89€. Oh yeah and that package is huge, this will last for years even if you rewick every single day, wasn't expecting that. And it really is so much better than the standard cotton I had been vaping before. Not a single dry hit on my Kayfun so far, even though I was really struggling with it before.

http://www.amazon.com/gp/aw/d/B000TCD51A/ref=s9_mbia_gw_d77_g121_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=mobile-1&pf_rd_r=02JBZ5B4NZMM2126Z2CK&pf_rd_t=36701&pf_rd_p=1824978342&pf_rd_i=mobile

Koh Gen Do, Muji and Puff are all pretty much the same.

If you choose amazon, make sure the order is "fulfilled by amazon".
Take a look and scroll down
You will pay a tad more but you will get it much sooner.

Also you can get unbleached Muji Cotton directly via Muji

id suggest cotton....
https://www.amazon.com/gp/product/B000TCD51A

i have the same tweezers, mkws wire, i4 charger, thrum scissors (they work ok.. but u dont ever want to bend em out of shape or it wont cut well anymore....

a little warning on the flush cutters.... use safety glasses... i saw pictures of someones that broke while cutting and metal flew into their eye... i have no experience with them tho... i use nail clippers for my wire cutting

If you are from montreal you have Vaptronic on Joliette (not far from the metro station) that has the tobeco clones :)

If you are not from around here, talk to them I am sure they figure out a way to send it to you.

Also, if you need wire, they sell Lightning vapes wire at very affordable prices :D as for cotton, they cotton bacon and also some regular cotton pads. If you can wait, I highly suggest you to get this from amazon.

I bought this. It's great.

https://www.amazon.com/gp/aw/d/B000TCD51A/ref=yo_ii_img?ie=UTF8&psc=1

I'll never run out.

Don't take any of the shitty offers these people are giving you, look on amazon, I think the pack I saw was 200 sheets for about 6 bucks
Edit: found it
http://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1?qid=1427499437&sr=8-1&keywords=japanese+cotton&dpPl=1&dpID=41Y1EJZVyxL&ref=plSrch&pi=AC_SY200_QL40

If you're rebuilding, you can go about a month on a single coil if you like it. Just replace the cotton. Basically, you build a coil (wrap a piece of kanthal around a tiny screwdriver, screw in the leads, then twist a piece of organic cotton at one end, slide it through. It's MUCH cheaper. 100ft of kanthal is $5-8, and you can buy enough cotton to last you quite a while here: http://www.amazon.com/gp/product/B000TCD51A/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Watch this to see how to build and wick a coil for the subtank: https://www.youtube.com/watch?v=T8rO6PoMgU4

Fulfilled by Amazon: http://www.amazon.com/gp/product/B000TCD51A?ie=UTF8&at=&force-full-site=1&ref_=aw_bottom_links

http://www.amazon.com/gp/aw/d/B000TCD51A/ref=mp_s_a_1_1?qid=1425565506&sr=8-1&keywords=japanese+cotton&dpPl=1&dpID=41Y1EJZVyxL&ref=plSrch&pi=AC_SY200_QL40

Aspire Nautilus BVC lover here.

Kayfun Lite 2019. No juice flow fuckery. Adjustable air flow. Great flavor. Easy to build. Low price high quality clones available.

Buy yourself a spool of 28 gauge kanthal and some Japanese organic cotton pads. These will last at least a year.

Temco wire and Cotton Labo Puff japanese cotton makeup pads. It seems like you pay a premium for buying stuff that's marketed to vapers, rather than just buying the same stuff that's not.

More noticeable in a better or worse than regular cotton way? I got this brand off Amazon and I've seen many posts saying it's one of the good ones to use. I didn't boil it like I did with the balls, might that be the problem?

https://www.lightningvapes.com/products/kanthal-a1-resistance-wire?variant=1822764164

COTTON LABO Organic Cotton Large Puff, 0.23 Pound https://www.amazon.com/dp/B000TCEXOS/ref=cm_sw_r_cp_apa_QJUyzbM6Q2YNN

$10

I've been using the cotton Labo for ages, it's cheap, it's organic Japanese cotton, and I can't tell the difference between this and all that fancy cotton. https://www.amazon.com/COTTON-Organic-Cotton-Large-Pound/dp/B000TCEXOS/ref=sr_1_2_s_it?s=beauty&ie=UTF8&qid=1503790097&sr=1-2&keywords=ORGANIC+Cotton+Puff+l

I've tried Rayon (didn't like the taste), Cotton Bacon tasted funny to me, so did "Cotton Candy". Native Wicks was good, but I could tell little difference between that and the cheap stuff.

Only thing I wouldn't want to use again was the ultra cheap organic cotton balls. They don't wick well enough for my purposes.

As much as I like Amazon, I'd say from what I've seen, there are entirely too many clones. It's probably safe to not shop for authentic atomizers and mods. Get your Japanese cotton from them though! Cotton Labo ORGANIC Cotton Puff Size L (120pc) https://www.amazon.com/dp/B000TCEXOS/ref=cm_sw_r_other_awd_fKAAwb64H8FPA

A velocity clone is probably the best place to start, really easy to build on with the two post design.

Wire depends on what you're looking for really, maybe get some premade coils of the more complex stuff such as claptons as well if it's you're new to making your own coils.

For cotton these will last you a lifetime and a half: http://www.amazon.co.uk/dp/B000TCEXOS/ref=sr_ph?ie=UTF8&qid=1452739283&sr=1&keywords=organic+cotton

Good luck!

Buy this now, so you'll have it [Cotton for Vaping]
(http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-120pc/dp/B000TCEXOS/ref=pd_sim_194_5?ie=UTF8&dpID=51DvHMs7TEL&dpSrc=sims&preST=_AC_UL160_SR123%2C160_&refRID=0X3ZZPYFPTC6KV3Z6K3S)

As /u/rakeleer said, use steam-engine.org to figure out how many wraps and what diameter will get you to a target resistance.

As far as wire thickness goes, in simple terms, the thicker the wire (lower the gauge), the more wraps it will take to hit a target resistance. E.g., to build a 1.0ohm coil at 2.5mm diameter, 28ga kanthal will take 5-6 wraps, while 26ga kanthal will take 9 (# of wraps may not be correct -- just going from memory, but you get the idea).

For cotton I use the following: http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-120pc/dp/B000TCEXOS/ref=sr_1_3?ie=UTF8&qid=1426525137&sr=8-3&keywords=japanese+cotton
It's an add on item, but you'll get free shipping if you add it to any qualifying order (just needs to be sold by amazon) of at least $25. There are also other options on amazon that are not add on, but they're a bit more expensive. You can also purchase kanthal on amazon as well, with free prime shipping if you have that.

Picked mine up from Amazon pretty cheap link

I used to use that but got a little paranoid because it's bleached. I ended up buying some unbleached organic labo puffs. It's cheaper and the same as Koh Gen Do.

Here is the mobile version of your link

(Cotton) https://www.amazon.com/gp/aw/d/B000TCEXOS?pc_redir=T1 $5-$6 should last you year(s).

Cotton Bacon is great, but this stuff is even better, and you about 10x as much for the same price. (Also available here if you don't want to get it as an add-on at Amazon.)

http://www.amazon.co.uk/gp/product/B000TCEXOS/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A61YNJRM0QV05

I got these a while ago, should last a lifetime. Free shipping from Japan, took me about 2 weeks to get here.

I use this. No boiling just wick it up and vape away.

http://www.amazon.com/gp/aw/d/B000TCEXOS/ref=mp_s_a_1_fkmr1_2?qid=1452986580&sr=8-2-fkmr1&pi=AC_SX110_SY165_QL70&keywords=Puff+japanese+organic+unbleached+cotton

d'oh.. just realized the cotton I got from amazon was a different brand. I got this instead. I must've switched at the last minute because of free shipping. I think I dodged the bullet on that one.

ok what about 100
http://www.amazon.com/dp/B00PEYI6LM/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=3DJMT7TZ7Z9H7&coliid=I2B3WL0E1JHUJL
http://www.amazon.com/dp/B00JVXVKB0/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3DJMT7TZ7Z9H7&coliid=I15SR2BR9HVXHX
http://www.amazon.com/dp/B000YL8NOK/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3DJMT7TZ7Z9H7&coliid=I1EJK40ZD0H5UA&psc=1
http://www.amazon.com/Resistance-Reader-Meter-Rebuild-Atomizer/dp/B00MBNCOMG/ref=sr_1_2?s=industrial&ie=UTF8&qid=1419535183&sr=1-2&keywords=ohm+reader
http://www.amazon.com/dp/B00J470LTA/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=3DJMT7TZ7Z9H7&coliid=I30LGRC3K0X7R3&psc=1
http://www.amazon.com/dp/B00NND4EJ4/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=3DJMT7TZ7Z9H7&coliid=I3QTS9HTELPMME
just dont know what mod clone

or i was thinking this kit ? http://www.amazon.com/Nemesis-Stainless-Mechanical-Patriot-Silver/dp/B00PIMCBTS/ref=sr_1_7?ie=UTF8&qid=1420960019&sr=8-7&keywords=rba+clone

Kanthal "Round"

Kanthatl "Flat"

Silica "Ekowool"

Cotton"Balls"

Thats tough luck with the tickets. :-/, I think we've all been there.

As far as the cotton:
http://www.amazon.com/gp/aw/d/B000YL8NOK?cache=a08230c86f217e5f845009429e969eaf&pi=SY200_QL40&qid=1406321023&sr=8-1#ref=mp_s_a_1_1

Do not buy the reinforced Rayon. DONT.

http://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0/ref=sr_1_2?s=beauty&ie=UTF8&qid=1404330217&sr=1-2&keywords=rayon+cellucotton

I mean for real, the reinforced is like the 3rd result. I really hope you're not using it.

Just replace the cotton. you can either get japanese cotton or you can get Cellucotton. It's what i use now. You get great flavor and there is no break in. here is a link. https://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0

This is the one I have. 100% cotton.

http://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0/ref=sr_1_1?ie=UTF8&qid=1412792650&sr=8-1&keywords=cellucotton

LOL. no but seriously, I'm ready to try rayon after this post.

I use unbleached organic Japanese cotton and it's great, and tried bleached cotton balls just to try it (no major complaints).

If there's a good and bad kind of rayon I NEED TO KNOW plz help thx. <3

edit: nevermind, you were being totally serious LOL! Not the one that says cotton. I was sure you were joking, nope. The rest of the thread answered everything else.

I went with this one: https://www.amazon.com/Graham-Cellucotton-Beauty-Rayon-Fibers/dp/B00PBGJT5A

NOT THIS ONE: https://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0

https://www.amazon.co.uk/SANEK-Cellucotton-Beauty-Coil-BT42251/dp/B001BKY3B0/ref=sr_1_1_a_it?ie=UTF8&qid=1503436713&sr=8-1&keywords=Cellucotton

£22.99 for 40 feets worth. Jesus Christ I didn't realise rayon was that expensive.

Ah sorry! I don't know if there are any other variants, but the most popular form of rayon is called "Cellucotton". You can get it from a Sally Beauty near you, or check any local beauty supply outlet. If you can't find it near you there's always Amazon

Get some rayon, it is called cellucotton... this https://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0 stuff. I use it and it works damn good. Prob find it in wallmart or a "beauty" store. I also have some Koh Gen Do cotton that is pretty cheap off of Amazon. Hell just hit up a vape shop and try to get a free sample of whatever latest and greatest wicking they are trying to push.

I live in the UK and just found 40 feet of this https://www.amazon.co.uk/SANEK-Cellucotton-Beauty-Coil-BT42251/dp/B001BKY3B0/ref=sr_1_1_a_it?ie=UTF8&qid=1479170904&sr=8-1&keywords=cellucotton

Is it the same stuff it seems much more expensive but looks the same, probably because of import costs I guess. Still cheaper than any of this glorified stuff though so I could definitely pick some up after payday if it'll do the trick!

Also on a side note how many times do I rewick a "disposable" coil, or do I use it until it breaks?

I have bough Muji and Selena, Muji has a worse flavour than regular organic cotton, Selena is better, maybe on par, I'm not sure if I'm remembering the organic cotton with rose coloured glasses
http://www.amazon.com/dp/B00260T94K/ref=pe_385040_30332190_TE_dp_1
http://www.amazon.com/dp/B00EWLBAAW/ref=pe_385040_30332190_TE_dp_3

I like the Selena Multi-layer Cotton Puffs for when I'm making a lotion mask. They're soft and easily peel into 5 different layers.

I've been using mine for several months now. I seriously drench my face with it because of the large amount and affordability LOL. I find that it is great for layering and providing refreshing hydration, but not much else. My skin has been improving lately (less breakouts and inflammation, more even tone), but I'm not sure I can 100% attribute it to Hatomugi. It's mainly hydrating and a little bit calming, if anything. I'm able to use it when my skin is more sensitive as well.

I use Selena Hagaseru Cotton, that are apparently very popular. It has 80 puffs that can peel to 5 sheets each, so 400 total omg. Soft cotton, appropriate size, holds good amount of liquid for masking. I think these are good for the cost, but it tends to fray a bit around the edges during use and tickles my face. I like the nooni toner mask sheets, it's literally like the sheet mask material cut into squares. But these are only 60 pieces total, so it's more on the pricey side.

I WAS a skin twin and it was a pain. in. the. ass. I got something like this out of nowhere and came to find out that it was overexfoliation/dehydrated skin/using products that weren’t for my skin.

I went on a round of accurate and literally just don’t do it. A vitamin a topical is way better than putting a pill in your body that dries your whole body out.

Anything oil based for both cleansing or using as a moisturizer is literally TRASH for my skin. It hates oil. And forget squalane oil, it has a comedogenic rating of one, and I’m guessing you’re combo skin like me so that’s a def no.

Here’s what you need to do:

Cut back on exfoliating to 1-2x a week. And focus on hydration mostly, your moisture barrier is extremely stripped. A damaged moisture barrier makes acne and closed comedones worse.



Here’s what worked for me through extreme trial and error.

AM:

**Thoughly cleanse hands with soap and water (it’s important to remember this step. We do so much more than we can remember with our hands every day)

•Cleanse with clarity rx vitamin infused cleanser (daily)

•Wipe with Cocokind Rosewater toner (hydrating)

•Eminence clear skin probiotic mask (when I have time) gently wipe off and stream face with microfiber or baby towel (3 rounds of each)

•Cocokind Rosewater Toner (hydrating) (spritz)

•Cetaphil’s moisturizing cream (pat in) OR Clarity Rx “Call me in the morning” (either are great options)

•Elta MD Broad Spectrum 46 Clear sunscreen


PM:

**Thoroughly cleanse hands with soap and water

•Derma E vitamin c micellar water on organic cotton pads

•Cleanse- Clarity rx vitamin infused cleanser (daily)
•Cleanse- Clarity rx cleanse as needed 10% Glycolic cleanser (ONLY 1-2x a week at night for exfoliation)

•Wipe with Cocokind Rosewater toner OR Josh Rosenbrook hydrating accelerator toner with organic cotton pads or Renée Rouleau toning cloths

Spritz and dampen/wet skin with Cocokind Rosewater

•Hada Labo Gokujun Hyaluronic Lotion Moist (lotion mask 3-5 mins withmulti-layered cotton puffs ...pat in remaining lotion

•Lavish Serum by Jolicoeur (it’s a ‘vitamin a’ and 24k gold serum) ....any ‘vitamin a’ serum/treatment like differing or tretinoin work to help manage excess sebum production and deplete congestion.

•Cetaphil moisturizing cream (cover skin and pat in)

•Acure spot treatment (when needed)

•Thin layer of Vaseline (occlusive)



I know you feel so down on yourself but you just need to stay positive and stay hydrating your skin. There is always a solution and you will come to see that it is something that can be fixed!



Other things that could possibly help contribute to your problem:


•Hylauronic acid vitamin to accelerate your skin’s hydration process

•Cut out eggs!! I found out through my naturopath that I actually had a slight allergy to eggs which increased my androgen/testosterone levels and helped assist the excess sebum. Cutting eggs out has shown improvement in my skin.

•Go to a naturopath and have levels checked. They can do blood test, allergy tests, hormone tests, etc. Could be an imbalance internally)

•Proper SLEEP...8 hours. Try to buy a silk pillowcase. I did and it’s life changing.

•Switch to vegan hair care products

•STAY AWAY FROM COCONUT DERIVED PRODUCTS. This was a huge culprit for me.

•Don’t touch your face.

•Don’t pick!! and try to stay away from glaring at yourself in mirrors lol

•Buy a shower filter (what kind of water do you have?)

•Also try drinking a glass of celery juice every morning if you can afford it. It’s so beneficial for your body and skin.

•Stay hydrated with water, tea, water, water, and more water.

• Try to cut out coffee if you can, it’s extremely dehydrating


As always YMMV, sorry for the novel response, but feel free to ask any questions you may have! I hope I helped!


EDIT: One pointer I want to point out is that there is a proper way to use the Hada Labo Gokujun Hyaluronic Lotion Moist, and a lot of people don’t know how. Lotion masks really are the only/best way to use the product. The product needs to be in full contact with the dermis layer. Soak a cotton puff (link above^) with the product, peel apart layers, and place them on your face for 3-5 minutes. Remove and pat excess product into skin. Continue with the rest of your skincare routine.

these are not too much cheaper right now but sometimes the price comes down. They are great for separating into layers without the fluffs getting all over your face when doing toner masks.

I bought these based on a rec from this sub and really like them:
https://www.amazon.com/gp/aw/d/B00260T94K/ref=ya_aw_od_pi?ie=UTF8&psc=1

If you open the door you can use an extended swab to wipe the heads and rollers. Or you can use a head cleaning tape if you have one.

https://www.amazon.com/SE-CS100-6-Cotton-Swabs-100Piece/dp/B002V0ZY2Q

Yes clean around wound. The flap has to go. It’s going to bleed when it’s clipped but that’s good cause you’re getting healthy tissue with blood vessels. Self-Adhesive Cohesive Wrap Bandage Tape by LotFancy, Elastic Non-Woven, FDA Approved, 10 Rolls, Assorted Colors (2Inches x 5Yards) https://www.amazon.com/dp/B01N6C91ZS/ref=cm_sw_r_cp_api_qNCLBbBSFG2VC
Remedy and Recovery Professional Groomer's Styptic Powder for Pets, 1.5-Ounce https://www.amazon.com/dp/B004PJ55KC/ref=cm_sw_r_cp_api_xOCLBbAKS8A0G
Stash Tea Original Honey Sticks 20-3 oz Sticks Individually Sealed Portable Honey Tubes 100% Pure Clover Honey Kosher Certified Individually Wrapped Sticks of Pure Clover Honey, Sweeten Tea or Coffee https://www.amazon.com/dp/B000I4PY1S/ref=cm_sw_r_cp_api_gPCLBb9TNCZHV
Dealmed Gauze Pads, Non-Sterile, Non Woven, 2" x 2", 4 Ply, 200/Bx https://www.amazon.com/dp/B01M63XDS7/ref=cm_sw_r_cp_api_kQCLBbVN65JRZ
Manna Pro Theracyn Poultry Wound and Skin Care Spray https://www.amazon.com/dp/B01I5XHK88/ref=cm_sw_r_cp_api_IXCLBb28EDCFH
Silver Nitrate Solution, 0.1M, 100mL - The Curated Chemical Collection https://www.amazon.com/dp/B0787GCSKG/ref=cm_sw_r_cp_api_E0CLBb42XWGRC
SE CS100-6 100 Count 6" Cotton Swabs https://www.amazon.com/dp/B002V0ZY2Q/ref=cm_sw_r_cp_api_G1CLBbQDJ3WQT
10 - Black Twist Open/Close 2oz Refillable Artist's Bullet Bottles https://www.amazon.com/dp/B01N59CU9J/ref=cm_sw_r_cp_api_.2CLBb6123ZF2
Swan Isopropyl Alcohol, 99 percent, Pint, 16 OZ (Pack of 2) https://www.amazon.com/dp/B00ZCCYTWG/ref=cm_sw_r_cp_api_G4CLBb3V54WRP
Dynarex D1415 Povidone Iodine Prep Solution USP, 16 Fluid Ounce https://www.amazon.com/dp/B005R8580M/ref=cm_sw_r_cp_api_G5CLBbMTA0YK8
Squip Nasaline Salt-box Of 50 Pre-measured Packets, 400 Ounce https://www.amazon.com/dp/B0009EXQLM/ref=cm_sw_r_cp_api_y7CLBbW76XN59
Teenitor 3ml Pipette, Top Quality Disposable Pipettes Transfer Pipettes 3ml Eye Dropper for Essential Oil Pipette Makeup Tool 110pcs https://www.amazon.com/dp/B071JXVGNK/ref=cm_sw_r_cp_api_Y8CLBbG25KBC5
Save A Caf Sav A Chick Electrolyte Vitamin Supplement 3 PACK/.25OUNCE https://www.amazon.com/dp/B004UQOZC4/ref=cm_sw_r_cp_api_19CLBb3BFM046
Gorilla 7500101 Super Glue Brush & Nozzle, 10 g, Clear https://www.amazon.com/dp/B01A7AVQKA/ref=cm_sw_r_cp_api_SgDLBbTME6VWX
MedPride Nitrile Exam Gloves, Powder-Free, Small, Box/100 https://www.amazon.com/dp/B00GS8W2HC/ref=cm_sw_r_cp_api_fiDLBb1X2K42G
Panasonic ES246AC Bikini Shaper & Trimmer for Women with Compact, Portable Design and Adjustable Trim Settings, Battery Operated https://www.amazon.com/dp/B00005JS5C/ref=cm_sw_r_cp_api_sjDLBbY10CSTW

Think that covers basics. Alcohol, self adhesive wrap, salt for saline, styptic powder, gauze, theracyn (antibiotic for superficial injuries), silver nitrate (only use with wooden applicators- strong cauterizing agent), pipette, electrolyte ( 1/16 tsp to 8 oz water. If chick is ill add honey for quick energy then mix solution with food to make mash), bottles, betadine ( I cut to 50% strength with saline), and gorilla glue with brush and dispenser. Oh and gloves and shaver:)

I've had previous success with cottons swaps with wooden handles( http://www.microcenter.com/product/360017/Double_Tipped_Cotton_Swabs_100_Pack). They look like this: https://www.amazon.com/SE-CS100-6-Cotton-Wooden-Handles/dp/B002V0ZY2Q

Use a bottle with the highest percentage Isypropyl alcohol you can find, such as http://www.microcenter.com/product/451968/Technical_Grade_Isopropyl_Alcohol_999_-_32oz

My process was to use a cotton swap dipped in the alcohol to clean up a majority of excess paste, then use a paper towel (I think I used Bounty) to clean up any excess.

If your totally OCD try these 6" cleaning swabs

If you want to use Amazon, this is what I've found that works well


http://www.amazon.com/U-S-Cotton-Sterile-Absorbent-500-Count/dp/B003FBKBA0/

I was thinking something like this: https://www.amazon.com/Swisspers-Cotton-Rounds-100-Count/dp/B009CUYUVY

Are you saying these are too thick? I imagine once you soak them they'd be pretty thin and packable, but then again I haven't tried packing them before.

If you need cotton, just use this.
https://www.amazon.com/Koh-Gen-Do-Pure-Cotton-60/dp/B00EMCGTAW

Been using it for a year while occasionally testing other cottons, and as long as you do a "scottish roll" it's as good or better than any vape specific cotton. There's nothing they can say about the order because it's for makeup removal and cleaning wounds.

If you can't buy from amazon, I'm sure you can find it from some other place.

cotton yes .... bought this 6 months ago and still only half way through it and I build lot.

for wire i would go to kidney puncher

I bought a bag of this recently and it's amazing. I have no break in period and the flavor is amazing. If you search you can find it under $10 on amazon. I have also used Koh Gen Do cotton. It had a day or two break in time, but was great after that.

Between the two I prefer the MUJI, for the lack of a break in period and it roles great with the scottish role method.

You want unbleached Cotton, preferably in pad form. something like this: https://www.amazon.de/Muji-696730289398-Wattepads-60x50/dp/B00MYXSRAQ/ref=sr_1_1?ie=UTF8&qid=1510579459&sr=8-1&keywords=muji+Cotton

First off, sorry, I'm on mobile.

Well, to get you started, the first thing you need to know is Ohms law. This will basically tell you the safe limits you can push a battery to. I wouldn't recommend a mechanical mod myself BUT it's always good to know. I would recommend a regulated mod so that you're relatively safe, at least at the start.

Unfortunately, to power big builds, you probably want a mod that does over 100W, even for some tanks like the TFV8, that's not much. The Smok R200 is a good choice and I used one for months and it was always reliable. The Temperature Control isn't the best but it works.

For an RDA, you want something with a deck that's easy to build on so something like the Mutation X V5 has a two post deck which is the easiest to build on. The side and top airflow means unless you drip too much liquid inside.

Batteries like the Samsung 25R are solid favourites so if you want to make sure you always have power, get 4 of them.

To charge the batteries, you probably only need a 2 bay charger. You'll always have 2 in the mod. Nitecore are probably the most popular. The Nitecore D2 will show you all the information you need to know about where they are up to with their charge, voltage, whatever.

To start with, rather than buying a full kit to build coils, you could try pre made coils. I started out with these pre-made Claptons and then when I knew I liked dripping, I bought this coil building kit and some kanthal wire.

To wick, you'll need cotton and this Muji cotton is kind of standard. Enough there to last for a very long time.

There are plenty of tutorials for how to wick on YouTube and the best method is probably the Scottish Roll. It's a good technique which lasts for a while. It will take you a lot of practice to get it right but it pays off.

That's a lot of typing so if there's anything else, just ask.

/u/kasumiwave I would recommend getting the Limitless Plus RDTA. Dead simple to build on. Lots of space and a 7ml tank.

For wire, I get mine from wireandstuff.co.uk

Cotton - Amazon sells big bags of Muji / Jap stuff for about £6. My bag has lasted me about 2 years so far.

https://www.amazon.co.uk/Makeup-Facial-Cotton-Unbleached-140pcs/dp/B00MYXSRAQ/ref=sr_1_2_a_it?ie=UTF8&qid=1486473276&sr=8-2&keywords=muji+cotton

Top tip - Vaping cotton is exactly the same as the stuff above, but with a bigger price tag!

> https://www.amazon.de/Muji-696730289398-Wattepads-60x50/dp/B00MYXSRAQ/ref=sr_1_1?ie=UTF8&qid=1497967898&sr=8-1&keywords=muji+cotton

I ordered a bag from amazon which had the older style packaging like in the picture you posted but the one that arrived had the new style (the one on the right). Which was the same stuff that arrived when I ordered directly from Muji.

Looks like exactly what you have:

https://www.amazon.de/Muji-696730289398-Wattepads-60x50/dp/B00MYXSRAQ/ref=sr_1_1?ie=UTF8&qid=1497967898&sr=8-1&keywords=muji+cotton

Or are the pictures your new bags?

I’ve actually used un-bleached cotton pads, cut to fit the solo stem, then it absorbs your moon rock and won’t leak in to your stem:


MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 140pcs https://www.amazon.com/dp/B00MYXSRAQ/ref=cm_sw_r_cp_api_i_INf1DbH3Q45EE

Or, as other users have said, you can sandwich it between herb, but I personally don’t like mixing the tastes of moon rocks/concentrate/herb. Best of luck.

Just ordered some Muji and some basic organic balls from Amazon. I like both for different builds. Muji seems to keep the KFL wicked with high PG juice.

http://www.amazon.com/gp/product/B00MYXSRAQ

This is the one pictured. There's an even bigger bag for only a dollar more but I cheaped out. Don't expect tracking with your order because it's coming directly from Japan in a sketchy looking package but it's well worth it.

http://www.amazon.com/gp/aw/d/B00MYXSRAQ/ref=mp_s_a_1_1?qid=1422326459&sr=8-1

Muji Japanese cotton that I use and bought from amazon. I would ditch the tweezers and pick a pair up at the drug store. You can also get lightingvapes kanthal and nitecore charger from amazon if you want bundle it all up and save on shipping.

Might have to poke around Amazon, their search is horrible, for a better deal or a non add-on item version of this, but this is the cotton I use.

https://www.amazon.com/Selena-Organic-Cotton-Puff-200Pc/dp/B00N7E9YYO/ref=sr_1_2_a_it?ie=UTF8&qid=1468205813&sr=8-2&keywords=puff+cotton

400 pads for 10 bucks

http://www.amazon.com/Selena-Organic-Cotton-Puff-200Pc/dp/B00N7E9YYO/ref=sr_1_1_s_it?s=beauty&ie=UTF8&qid=1462889635&sr=1-1&keywords=puffs+organic+cotton after seeing this i might just have to grab it, 10$ for 2 packs lol. That'd probably be a 5 year supply to say the least for me.

Selena Organic Cotton Puff Size M (200Pc) 2pcs Set https://www.amazon.com/dp/B00N7E9YYO/ref=cm_sw_r_cp_apa_i_CdbFDbA75YXM3

(here)

That's a pretty sweet set up to start off with! Since most of your questions are answered, might I suggest learning to build your own coils, rather than buying replaceables. In the short term it will be a bit pricey to begin with if you purchase a complete set, though many items can be replaced with simple home tools, like nail clippers and tweezers. In the long run you gain a large ammount more control, customizable experience, and save some good money.

Bare essentials you're looking to buy: A new tank, wire, a coil-jig (easy mode) or screw drivers, a large supply of cotton.

or you could pick up a kit

EDIT: Just do the math, if you change coils once a week, how long could it take for this set of things to pay for itself. Then think about how some people feel it makes the experience better.

Info | Details
----|-------
Amazon Product | Selena Organic Cotton Puff Size M (200Pc) 2pcs Set
>Amazon donates 0.5% of the price of your eligible AmazonSmile purchases to the charitable organization of your choice. By using the link above you get to support a chairty and help keep this bot running through affiliate programs all at zero cost to you.

I know you said you already bought some cotton, but I found the cotton you were looking for and it's fulfilled by Amazon. It's just 2 packs instead of just one. Here

I can see that. But when buying cotton in bulk like this that comes out to about 10$ for 400 pads, that is .02 1/2 cents a pad, then you cut one pad into multiple strips. So it may be a little wasteful but makes getting the job easier. Using some of the marketed cotton for vaping that is much more expensive, That as far as I can tell is just cotton would be more pennies cut away.
https://www.amazon.com/gp/product/B00N7E9YYO/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

I use cotton bacon sometimes because I bought it for some reason. It's ok.

Just get this and you'll be good for awhile

https://www.amazon.com/gp/product/B00N7E9YYO/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

This is Jap organic cotton I use. http://www.amazon.com/gp/aw/d/B00N7E9YYO/ref=sr_ph_1_a_it?qid=1457191217&sr=sr-1&keywords=puffs

http://www.amazon.com/gp/product/B00N7E9YYO?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00

For wire I go to Advanced Vape Supply. The prices aren't necessarily better than Lightening Vapes but the selection on fused clapton wire certainly is. Lightening Vapes is frequently out of stock (even before the fire) on clapton wire, especially fused.

Cotton, I get a 2 pack bag from amazon https://www.amazon.com/gp/product/B00N7E9YYO/ref=ox_sc_act_title_14?smid=A3B0YH72AZETAU&psc=1

It's a total of about 400 squares right around the 8.00 mark.

http://www.amazon.com/gp/aw/d/B00O6BO0LY/ref=pd_aw_sbs_bt_2?refRID=192QJG1DQBAQ3T2ZKTEY


This seems like a no brainer. Over half the cost.

There's a certain type of cotton you should use if you intend to inhale through it. There's a disease called cotton lung factory workers used to get all the time. Also most cotton uses bleach to dye it and pesticides and fertilizers and stuff you really shouldn't be inhaling.

This is the cotton I use for my RDA wicks. Just seems a bit healthier.

https://www.amazon.com/Japanese-Organic-Unbleached-Cotton-Large/dp/B00P219C5Q

Not sure if you care, but I thought I'd warn you. I'm just assuming since you got a vape that you want to live a long healthy life. Feel free to criticize my thoughts, I just want everyone to be happy and healthy.


Edit: forgot url for cotton.

You're going to want to stock up, especially if you're just getting into rebuildables.

I would avoid individually packaged pads and go for a bulk pack. This is where I've bought my cotton https://www.amazon.com/dp/B00P219C5Q ive ordered it twice and the first time the pads were small and the second they are huge. Despite this variance I still recommend them as the taste is delicious, the cost is perfect and they last for a very long time.

A large pad now will last me almost a month, but when I first started I went through like 7 medium pads until I got wicking down.

Wire lasts a very long time. I ordered a quad core fused Clapton 15ft spool from advanced vape supply in December and haven't even gone through half after replacing all my coils with it. Just got a 30ft one as backup since I absolutely love it.

I thought you can only ever use organic cotton or Cotton Bacon or something similar. I've never used just store bought cotton, not from a vape store.

No idea overseas. You should be able to find some in most vape shops.

Amazon link.

https://www.amazon.com/Japanese-Organic-Unbleached-Cotton-Large/dp/B00P219C5Q

I personally prefer degummed hemp fiber as it has less taste and it has a higher combustion temperature. I bought mine direct from dynavap.

I usually pick it up from Sally's Beauty Supply. Graham CelloCotton brand. The 500 foot box will last a lifetime and is $12-$20, although I have seen it online as low as $10.

Looks like it's $30 at Amazon http://www.amazon.com/Graham-CelluCotton-Beauty-Fibers-44060/dp/B00PBF8PAG

Here's some more info on rayon if you're interested:
https://www.e-cigarette-forum.com/forum/threads/rayon-wick-better-flow-flavor-longevity-and-nic-hit-pt-2.706948/

Are the muji pads on Amazon organic and Unbleached? 🤔 because I've been using these and they're pretty good MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 180pcs https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_cp_api_nQIIybNYDEYF5

Is that these?

Questions about japanese tools.

Has anyone ever used these: https://www.amazon.com/gp/product/B01KYQG5VW/ref=ox_sc_sfl_title_4?ie=UTF8&psc=1&smid=AALYO5FK3W0KA

or these: https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=pd_bxgy_194_img_2?_encoding=UTF8&pd_rd_i=B00VHA3ZXQ&pd_rd_r=1XQH53P5TK80E6AJRDQN&pd_rd_w=iZbvw&pd_rd_wg=lVc4S&psc=1&refRID=1XQH53P5TK80E6AJRDQN

And what did you use them for/would you recommend them?

https://www.amazon.com/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00VHA3ZXQ/ref=sr_1_1_a_it?ie=UTF8&qid=1468199837&sr=8-1&keywords=muji+cotton

They also sell it on amazon for cheap in case you have prime or somethin
Edit: https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_other_apa_C.JaAbTW0NJMN only 7 bucks and i guarantee it will last over a year.

Link for the cotton: https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_other_apa_LoXsxb0CZG8YK

It will be cheaper to get it online from somewhere like amazon, here, that will last you ages. The same amount from your b&m would cost $45 if my maths is correct. Not saying don't support your local stores but...

I spend about £1.50 a month on cotton.

If you're up for it get a full coil builders kit because it has all the doodads you need.

50 of 26 gauge Kanthal

Enough cotton to last 4 people a lifetime

Yup all i use is muji, amazon a tad cheaper. https://www.amazon.com/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00VHA3ZXQ/ref=sr_1_1_a_it?ie=UTF8&qid=1466823905&sr=8-1&keywords=muji+cotton

It was 7 something when I ordered it. Now it's 8.39 (I think) took almost a month to get it but well worth the wait/price.
MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 180pcs https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_awd_BiF-wb0VSC9N1

I use an RDA for vaping so I've got a ton of Japanese cotton pads.This works though, I've used cotton in my dynavap for dabs before, and for CBD crystals, I do want to try hemp fiber though because I get a cotton taste when I do this.

Edit: I didn't read your whole post, my bad, does Hemp Fiber actually have a worse taste than cotton?

Also This is the cotton I use
https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=sr_1_2_a_it?ie=UTF8&qid=1541782557&sr=8-2&keywords=muji+cotton+pads
if you ever start dripping for vaping this package will last a year+ even rewicking daily

I've been using this for the past 4 years vaping for regular wicking and Scottish rolls. Don't be put off by the fact that it says make up. https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=mp_s_a_1_2?keywords=MUJI+Makeup+Facial+Soft+Cut+Cotton+Unbleached+60x50+mm+180pcs&qid=1559300723&s=gateway&sr=8-2

This may be what you're looking for.

https://smile.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=sr_1_6?keywords=muji+cotton+pads&qid=1549854340&s=gateway&sr=8-6

If you use cotton makeup pads like these ones, make sure that they're unbleached.

It's pretty cheap

Decided to try these Muji out and put in an order. They are $6.99 on amazon currently for 180 pads.

Muji Cotton Pads

MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 180pcs https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_cp_api_qPhSAbM3GRS7Q
These I love for micellar water. I split them in half and just use one half per routine when I’m not wearing makeup. They’re very soft and durable, and so much more luxurious and yet still more economical than your nicer cotton pads available in the US.
HuntGold 1000Pcs Soft Cotton Daily Facial Makeup Puff Pads Paper Cosmetic Remover Cleansing Pads https://www.amazon.com/dp/B06Y131K2S/ref=cm_sw_r_cp_api_8RhSAbC7AMPVA
These are very thin with a bit of a rough texture. I was using them exclusively because I bought them and the Muji ones at the same time and didn’t want to have multiple kinds of facial cotton because that would make me crazy, right? But I gave up because they are so thin it would have taken me years to get through them and that’s even crazier. That said, I love these for the thinness and the lack of waste of product when I use them. They are perfect for essences and toners you don’t want to waste. I’ve been using the trial size pixi glow tonic for like two months now thanks to these guys.

This might be a good starting point to build on the Velocity.

The above linked Steam Engine site is an invaluable tool for the coil builder. If you play around with it you will see that if at some time you want to go much lower than the linked .7Ω coil it will be necessary to use lower gauged wire so the coil has enough wraps to give lots of contact with the wick. There is also several mobile apps for coil building with Vapers Toolbox being a popular one.


As for flavor in the Velocity or any atty, the rule of thumb is to place your coils as close to the airholes as possible without touching and causing a short.


One last comment. If your cotton is in ball form I would recommend getting some Japanese cotton for it wicks much better than cotton balls.


ENJOY

Yep, either MUJI or puff cotton. It's often recommended around here.


Works just as good, if not better than cotton bacon. It's in pre cut squares. I find 1/3 of a square is perfect for a 3mm coil.


https://www.amazon.ca/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00VHA3ZXQ/ref=mp_s_a_1_7?keywords=cotton+pad&qid=1554239471&s=gateway&sr=8-7

Just get your cotton from amazon and you won’t have to worry bout wasting cotton

Rebuilding is the way to go, good performance at a great price!

https://www.amazon.com/gp/aw/d/B00VHA3ZXQ/ref=yo_ii_img?ie=UTF8&psc=1

Those are the ones I ordered. They're very smooth on both sides and split easily into two halves. They are rectangular and don't appear to have seams on them. I just tried splitting one of mine into four "slices" aaand...it did not go very well lol. I have definitely used these soaked with extra essence as a piecemeal mask though, and that worked out just fine.

I'm using MUJI cottong (https://www.amazon.com/gp/product/B00VHA3ZXQ/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1)

Here's a couple of pics (sorry for the crappy quality, I can't get my iphone to focus well so up close...)
http://imgur.com/a/CEojY
http://imgur.com/vLcbwV7

Thank you for helping me!

Dual triple-twisted 316L at .22ohms in TC in the Griffin 25 here.

You kinda have to find the perfect temperature that you personally like yourself (same goes for watts in wattage mode). Just start low (150C in TC or 30W in VW for this kind of build) and slowly work your way up. In TC you will have to bump up the wattage occasionally if your coil doesn't reach the set temperature (...fast enough).

I use these for wicking in all my atties. And always give my wicks some time to break in. I noticed that fresh wicks give a slightly burnt taste when vaped at my usual TC settings compared to ones that are broken-in. After a few puffs, you should be good to go :)

Try this, I bought a bag almost 2 years ago and still have a shit ton left, 2 of us using it.

https://www.amazon.com/gp/aw/d/B00VHA3ZXQ/ref=mp_s_a_1_fkmr3_1_a_it?ie=UTF8&qid=1519818093&sr=8-1-fkmr3&keywords=japanese+organic+cotton+vaping

This cotton lasted me for 2 years before I had to buy more

It's happened on a mixture of cottons. But right now im using these japanese cotton pads https://www.amazon.com/gp/product/B00VHA3ZXQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 but it has happened when using bacon bits and other vape store cotton brands. I've been vaping at a max of 70 watts but usually around 45-55.

I use this. For a few bucks you get infinite cotton. I cut it into strips about 3-5mm in width.

http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1415070556&sr=8-1&keywords=puff+cotton

this is the one I've been buying for the past 3 years and its much cheaper https://www.amazon.com/ORGANIC-Cotton-Makeup-Puff-Medium/dp/B000TCD51A/ref=sr_1_5_s_it?s=beauty&ie=UTF8&qid=1482260231&sr=1-5&keywords=organic+cotton

RDA Beginner's kit:

• Precision Screw Drivers (Amazon)
  
• 24 AWG Kanthal A1 (Amazon)
  
• 26 AWG Kanthal (Amazon)
  
• Japanese Cotton Pads (Amazon)
  
• Needlenose Pliers (Amazon)
  
• Wire Cutters (Amazon)
  
  Total at amazon: ~ £32
  
  RDA Options:
  
  
• Velocity - this RDA is a darling in the reddit community and has a wide range of airflow from quite closed, to wide open. The mini clone is a beast and well worth the $18 USD
  
• Sapor RDA - This top-airflow RDA removes worries of leaks, and is cheap to boot! The sapor has a 4 post deck making building nice and easy, and comes with both a wide-bore and standard 510 drip tip. The sapor usually goes for about $20 USD
  
• Mutation XS / XV4 RDA - this RDA (ok, these RDAs) offerse a combination of side and top bottom airflow, and is great for some cloud chasing. It's cheap, but, it does have a significant propensity for leaking - so be wary. Usually goes for around $25 USD

Link

It ships fast. 2-3 days to your door. It's Amazon.

Vendors can fuck off with the overpriced bullshit.