(Part 2) Best dispaly stands according to redditors

I have one and display it on a simple metal stand like this one: https://www.amazon.com/gp/aw/d/B006ZMFW28/ref=psdcmw_3735181_t3_B00CICFFQW

They don't cost a lot, like $40 for the fossils on Amazon. But having a 200,000,000 or so year old fossil on my end table in my living room rocks.

I have a little piece of paper that comes with that and describes it at home. I could take a picture of it if you want.

Edit: here's a slightly cheaper version of the one you have: https://www.amazon.com/gp/aw/d/B00DIGLK8O/ref=mp_s_a_1_fkmr0_1?ie=UTF8&qid=1478314867&sr=8-1-fkmr0&pi=AC_SX236_SY340_QL65&keywords=Multiple+Orthoceras+Foss

She went with these risers

Adorox Top Quality ( 2 Set ) Clear Acrylic Display Riser https://www.amazon.com/dp/B01CJ1B2EU/ref=cm_sw_r_sms_c_api_pMYFAbQWJTN5B

https://www.amazon.com/Mini-Acrylic-Easel-Stands-2-25/dp/B0095WTLTK

Got a pack of 5 here on amazon:

https://www.amazon.com/dp/B00BIXMDAS/ref=cm_sw_r_cp_api_iTjezb1GJYG2H

These display risers 10 PCS Clear Acrylic Display Risers Showcase for Jewelry 4"x 3''x 2'', Lot of 10 https://www.amazon.com/dp/B011JOVQHG/ref=cm_sw_r_cp_api_i_RsFaBbPT6A83F

Also, sorry for making two comments, but I recommend that you sell off stuff you don't want, especially the smaller and lower quality pieces that many start off with as first pieces.

Here's some links for specific stands that I recommend. They should be versatile and are budget friendly.

U-Stands. Great for highlighting pieces in the back of displays and adding accents, sometimes can be rotated to create a two level effect.

Easel Stands. Good for displaying slabs or even books.

Sliding Stands. Good for vertical pieces, and can hold much more than you would think. Really wide pieces can start adding too much weight, so don't push them too far.

Peg Stands. Subtle and easy to incorporate into any display. 1 2 3

Slotted Acrylic Stands. Meant to hold labels so they're easy to see for pieces in the back or on higher shelves.

Got them on Amazon. Here's a link.

Clear Display Stand Easel for Air-Tite Holder Coin Capsules Challenge Medals Casino Chips (Qty 20) https://www.amazon.com/dp/B00BIXR2HM/ref=cm_sw_r_cp_api_SyFozbYPQ0G8A

I appreciate the kind words! I believe they are originally for jewelry. Here’s a link to the risers if you’re interested!

https://www.amazon.com/Leatherette-Risers-Set-Gems-Display/dp/B007PKH5TC

I got a couple of these, they’re ok. Don’t work that well with heavier deluxes

Tamashii Nations Bandai Act.5 for Mechanics Clear Action Figure https://www.amazon.com/dp/B003F256QI/ref=cm_sw_r_sms_c_api_TXw-BbFK31G4R

Not necessarily specific to fliers, but I have a few of these and they’re great

Clear Acrylic Riser Set of 3 (3-Inch, 4-Inch, 5-Inch) https://www.amazon.com/dp/B00GAGEARM/ref=cm_sw_r_sms_c_api_tZw-BbG2ZAW72

I suggest either:
https://www.amazon.com/gp/aw/d/B074CGC4B7?psc=1&ref=yo_pop_mb_pd_title
Or: https://www.amazon.com/gp/aw/d/B00ZZ43PVC?psc=1&ref=yo_pop_mb_pd_title

Depending on what you're arranging. Admittedly not from Ikea, but they fit well and look nice.

How about a plastic stair/step display? There are plastic risers too. Not sure if they're available in your country though.

As for the glass vitrine with lights, LED string lights are pretty cheap now so you could do it yourself if you want. There are ones that plug into an electrical outlet and others are battery operated.

They’re great! Bought them from this guy named “OnFireGuy” on Amazon:

OnFireGuy Clear Display Stand Easel for Air-Tite Holder Coin Capsules Challenge Medals Casino Chips (Qty 20) https://www.amazon.com/dp/B00BIXR2HM/ref=cm_sw_r_cp_api_i_Fl16CbY4S4J23

Here it is:
Leadleds Exquisite New Black Solar Powered Display Stand Rotating Turntable with LED Light + (Colored Unit Packing Box) https://www.amazon.com/dp/B00K7777DE/ref=cm_sw_r_cp_apa_i_Hyz0DbRQ2TN0P

Plastic see through stands from Amazon. Come in different sizes so you can sit Pops behind each other

Edit: Adorox 2 Set Clear Acrylic Display Riser https://www.amazon.com/dp/B01CJ1B2EU/ref=cm_sw_r_cp_api_w213BbA1C42DZ

Here's a comment with some stand recommendations that I gave to someone else.

Here's some links for specific stands that I recommend. They should be versatile and are budget friendly.

U-Stands. Great for highlighting pieces in the back of displays and adding accents, sometimes can be rotated to create a two level effect.

Easel Stands. Good for displaying slabs or even books.

Sliding Stands. Good for vertical pieces, and can hold much more than you would think. Really wide pieces can start adding too much weight, so don't push them too far.

Peg Stands. Subtle and easy to incorporate into any display. 1 2 3

Slotted Acrylic Stands. Meant to hold labels so they're easy to see for pieces in the back or on higher shelves.

This is all really for cabinet sized pieces, but I don't really know what you have so this may or may not work.

The Detolf with some extra glass shelves is probably the most popular choice. I use a wall mounted shot glass display case.

Found it on Amazon

https://www.amazon.com/gp/aw/d/B00K7777DE/ref=mp_s_a_1_4?ie=UTF8&qid=1492017034&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=leadleds+rotating+display&dpPl=1&dpID=41ds2Io-LJL&ref=plSrch

Was really happy about the bar, as I've seen some look great and others not so much.

Ended up buying the stands with the Apmex order:

http://www.apmex.com/product/15805/air-tite-easel-clear

Found them on Amazon (5 + Prime shipping for ~$8.): http://www.amazon.com/Display-Air-Tite-Holder-Capsules-Challenge/dp/B00BIXMDAS

10 pack for $9: http://www.amazon.com/Air-tite-Acrylic-Clear-Easel-Pack/dp/B009GAD3E0

20 pack for $11: http://www.amazon.com/Display-Air-Tite-Holder-Capsules-Challenge/dp/B00BIXR2HM

If it helps any, here's an idea for that: mini risers. We use them for our pretty varied connection of nerd.



The risers we use


Some of our collection

Leatherette Risers Set by Gems on Display https://www.amazon.com/dp/B007PKH5TC/ref=cm_sw_r_cp_api_i_CjZEDbQES61MS

Amazon. Here’s a link to the black and you should be able to see the white ones from that page.

amazon display risers

Thanks! The stands are here !

i ordered this a while ago. works great.
https://www.amazon.com/gp/product/B00K7777DE

Kaiser Doll Stands cannot recommend enough.

I use these three level risers, these fit the standard bases only, 3 level risers edit fixed link I also have this set, of 3 smaller risers as well just for other figures.

Thanks. I got these, but there are plenty of other options as well.

Sure, I got them from Amazon. OnFireGuy is the brand. 10 Clear Display Easels. I got this back in May and you get 10 in the set. They have other display items as well. I ordered a different style to display my acrylic Dragon Ball Z balls.

https://smile.amazon.com/gp/product/B009K4VUME/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

This is the same brand as the one I bought but they no longer offer the size I got.

https://www.amazon.com/gp/product/B07KN5G9CQ/

The difference with mine were the three sizes were 3", 4", and 5". The ones in the link are 5", 6", and 7" and they're almost twice the price.

I did find these which are the same size and similar in price to the ones I got, they're just a different brand.

https://www.amazon.com/gp/product/B013JS2QM4/

I use these.

https://www.amazon.com/dp/B075HPR4GZ?ref=yo_pop_ma_swf

I bought that on Amazon too, heres a link

I've gone with these guys. They are not the most cost effective ones but they do the job on all the figures. I've scrounged on eBay for used ones and thats been a major help. I have seemed to get them generally aroun $1.00 p/stand.

https://www.amazon.com/Kaiser-Doll-Stand-1175-Box/dp/B003TP835W/ref=sr_1_25?s=furniture&ie=UTF8&qid=1504620001&sr=1-25-spons&keywords=action+figure+stands&psc=1

I use a combination of these two:

https://www.amazon.com/gp/product/B01CJ1B2EU/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0095MH2ZU/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1

Amazon, my dudes! Kaiu Premium Vinyl Record Stand:
https://www.amazon.com/dp/B075HPR4GZ/ref=cm_sw_r_other_apa_i_ammXCbXJ34W2Y

Here ya go! I actually got my own from Amazon! It's best to purchase them in sets because they're pretty costly. :)

I looked into those after I saw them on the show. They are a little expensive. I ended up buying these stands off of amazon fo $10.
http://www.amazon.com/gp/aw/d/B00GAGEARM/ref=mp_s_a_1_3?qid=1449978087&sr=8-3&pi=SY200_QL40&keywords=acrylic+stand+clear&dpPl=1&dpID=41VzaKnEoqL&ref=plSrch

I like to use Kaiser doll stands model 1175 for my SW 6 inch figures.

https://www.amazon.com/Kaiser-Doll-Stand-1175-Figures/dp/B003TP835W/ref=sr_1_1?ie=UTF8&qid=1485635890&sr=8-1&keywords=kaiser%2Bdoll%2Bstands%2B1175&th=1

16' UV LED strip lining the inside walls of a big coffee can while my prints sit atop a solar turntable display stand.

I cure for 15 minutes for most stuff, but I haven't really futzed around with whether I should increase or decrease using the adage that "if ain't broke don't fix." 15 works for me.

Amazon

I think you should look for a Curio Shadow Box. I have seen chips dispayed in them before and it looks really cool.

This one is expensive but shows the idea of what I mean.

https://www.amazon.com/Display-Holder-Cabinet-Shadow-Hinged/dp/B005CK3D1G/ref=pd_day0_196_1?_encoding=UTF8&psc=1&refRID=0M81G97NFC294M9ZAFND

Ohh my bad lol. I bought this like record holder from Amazon. Here:
https://www.amazon.com/dp/B0711CMFDZ/ref=cm_sw_r_cp_apa_i_ApdxDbG440E4V

Acrylic risers work well

https://www.amazon.com/dp/B00ZZ43PVC/ref=cm_sw_r_cp_api_mwTLAbCCBA0GQ

Thanks. The stands are these type. I then painted them with acrylic paint.

Edit: those seem pricy on Amazon. You can probably get them cheaper from other places.

HESIN® Clear Acrylic Risers Set of 3 (3inch,4inch,5inch) https://www.amazon.com/dp/B00ZZ43PVC/ref=cm_sw_r_other_apa_n.w.ybSDDKFJW

I use a decorative plate stand like this Lots of airflow and I can charge while I play. There are all kinds- clear plastic, wrought iron, cardboard DIY ones.

I just got 'em off eBay a while back, and they've become my default action figure stands: https://www.amazon.com/gp/product/B003TP835W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

They can be a little fiddly to use since the wires that hold onto the figures' waists can bend, but they can be bent right back into shape, and that ability to bend those wires can come in handy when you need to bend the wires wider to hold onto wider-waisted characters like Pennywise.

These exact ones. Various heights too so you can have different flying heights
Clear Acrylic Riser Set of 3 (3-Inch, 4-Inch, 5-Inch) https://www.amazon.com/dp/B00GAGEARM/ref=cm_sw_r_cp_apa_i_0i0ZCb0DBYH5H

There are many a makerspaces/fablabs that can help with this. Then one only has to pay the monthly fee+materials. This does seem a bit pricey for what it is.

It’s a repurposed decorative plate holder.

The cooler on the hybrid is probably still thick enough. But you could also try a picture frame stand similar to this

https://www.amazon.com/gp/aw/d/B006ZMFW28/ref=mh_s9_acsd_top_bFfgr_c_x_3_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=mobile-hybrid-3&pf_rd_r=MQXWK0GBREJE7F1ASTEA&pf_rd_t=30901&pf_rd_p=ddaf8e12-5a47-5dec-88dd-637c3478fc20&pf_rd_i=3735181

I used these: https://www.amazon.com/Kaiser-Doll-Stand-1175-Box/dp/B003TP835W/ref=sr_1_10?keywords=action+figure+stand&qid=1570230157&sr=8-10

https://www.amazon.com/gp/aw/d/B06XWN5VP4/ref=yo_ii_img?ie=UTF8&psc=1

The tiered ones are these. They're perfect for amiibo. The only downside is they're only the 3 rows, so I ordered the small ones to make a couple more rows.

The small ones are these. They're great, but I had to order a bunch of them, so just realize that.

Found these nice little stands on Amazon: https://www.amazon.com/gp/product/B009K4VUME/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Turns out pretty well: https://1drv.ms/i/s!AkZsD_BFouGYh-tvrl6Ats0t5J1VTQ

Looking forward to getting more in the collection!

I have a pretty janky setup, but I bought this one: https://www.amazon.com/gp/product/B01DLL10JO

I then have a this on top: https://www.amazon.com/gp/product/B071ZXWSSB

And it's sitting on a large white poster board.

Those are these buggers:

Ikee Design Acrylic Display Case

Cutting apart some cardboard and covering it with felt cloth to make something like this would be cool

These are only $7.99!

Thanks! I am using these http://www.amazon.com/Mini-Acrylic-Easel-Stands-2-25/dp/B0095WTLTK/ref=pd_sim_hg_4?ie=UTF8&refRID=14C3WRQZ101HX6S6JCPG

Keep an eye out for Ikea's sales. Once or twice a year you can get free shipping and that's the time to get those Detolfs. Because, as you've seen, getting one shipped normally is crazy expensive!

As for your question, I've seen acrylic display cases at the Container Store but they were kind of expensive for the size.

I wonder if something like this would be too small for Nendos.

EDIT: Yep, just looked at the measurements. Too small for Nendos I think. Maybe browse Amazon for "acrylic display case" and see what else you find.

That's what I use, a shot glass case. I bought this one: https://www.amazon.com/Display-Holder-Cabinet-Shadow-Hinged/dp/B005CK3D1G

https://www.amazon.com/dp/B06XWN5VP4/ref=cm_sw_r_cp_apa_KUKWAbDTGP8C3

Maybe something like this?

Pelican case with either custom insert or pluck foam.

Spyderpac or similar. Slim and easy to get out of the way. Hangable.

If you don't mind or want them on the shelf there are all sorts of stands. Even something cheap like along these lines or similar can work (not advocating that in particular just an example of small simple display holders).

Sunny is standing on of these from amazon.

It's the master grade rx-78-2 3.0 and it's on an electric rotating base I found on Amazon https://www.amazon.com/dp/B01DLL10JO?ref=ppx_pop_mob_ap_share

Well done. I've been watching your progress on Reddit. It turned out great. Love the story it tells, and all the dynamic poses of the models. Space hulk models are awesome. Working on some myself right now. May I suggest getting a turntable and taking a small video of all the angles https://www.amazon.com/gp/product/B01DLL10JO/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

It's a nice way for us to see everything and you to showcase your stuff :-)

If you’re using a detolf I suggest some clear display stands from amazon to maximize the space and heights between the shelves. You can get some really nice ones for $10-20.

Something like this.

https://www.amazon.com/Acrylic-Display-Risers-Showcase-Jewelry/dp/B011JOVQHG/ref=mp_s_a_1_16?keywords=display+stands&qid=1555656745&s=gateway&sr=8-16

1 X Clear Display Stand Easel for Air-Tite Holder Coin Capsules Challenge Medals Casino Chips (Qty 5) https://www.amazon.com/dp/B00BIXMDAS/ref=cm_sw_r_cp_api_U.4qyb5XY3HW7

Here you go!

I use these
The same company (I think) has a variety of sizes and different dimensions. If you get them and they look scratched or cloudy, that's just the protective film they're wrapped in. All the ones I've gotten are crystal clear.
They're not quite like you've shown, but they're very inexpensive and unobtrusive.

Thanks! It was a little pricey, but it is very well built, and has a hinged acrylic door so my Minifigs are protected, but still easily accessible. It is from displaygifts.com, but I ordered it through Amazon (it was cheaper).

http://www.amazon.com/Display-Holder-Cabinet-Shadow-SC16-BLA/dp/B005CK3D1G/ref=pd_sim_sbs_hg_2

Amazon. Here’s a link:

https://www.amazon.com/gp/aw/d/B0095WTLTK?psc=1&ref=yo_pop_mb_pd

They’re not as heavy as I’d like, but the price is good. As long as they don’t get knocked, they hold up.

I used these, personally:

https://www.amazon.com/gp/product/B013JS2QM4/

They're cheap and work well in that IKEA glass case for a stadium/staggered display like this: http://www.zelda.life/images/case_2_slot_2_medium.png

I ended up buying the following from Amazon:
https://www.amazon.com/gp/product/B07B64HCQZ
https://www.amazon.com/gp/product/B009SNOEPM
I'm not completely won over by either set, but they both have their uses. The first set is higher and more square, while the latter is wider. If anyone know of good (price effective) acrylic stands let me know!