Best electrical cable ties according to redditors
We found 1,185 Reddit comments discussing the best electrical cable ties. We ranked the 208 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 1,185 Reddit comments discussing the best electrical cable ties. We ranked the 208 resulting products by number of redditors who mentioned them. Here are the top 20.
It's not pretty lol. We tried to zip tie everything together to make it at least understandable haha
EDIT: Hijacking this post since there are a LOT of common questions. Oh and /u/smilenataliew is the wife :)
FAQ:
>How did you connect everything to the TV/What adapters did you use?
NES through Gamecube (bottom 4): We have a 4-input composite switcher (those Yellow/Red/White cables) between the N64 and Gamecube, connected to our TV's 3.5mm composite port (which looks like a headphone jack), which we convert with cables like these. We do not recommend a composite to HDMI converter, as the output (might) look garbled from older systems (it did for us).
Wii: Component cables to HDMI converter, then into a remote controlled HDMI switcher (switcher and controller can both be seen to the left of Kirby Amiibo/the Wii)
WiiU & Switch: HDMI to the same HDMI switcher
>Don't the controllers just fall out when you open the case? How are they secured?
The NES controller is resting on a WiiU controller stand, oddly enough!
The SNES controller is the most finnicky. It's slightly leaning back on its own cords, but it's hard to get it to stay put.
The N64 controller is leaned against a stack of N64 games--it's definitely the system my wife and I have the most games for already!
The Gamecube controller is leaning against two other stacked gamecube controllers.
The Wii controller is just just leaning up against a thick piece of cardboard (more cardboard is also holding up the NES and SNES systems since the bottom of their doors would block view of the systems otherwise. My wife intends to wrap all cardboard with contact paper to make it all more decorative, she's very crafty!)
The WiiU has the same controllers as the Wii, except for the screen one, which is on a stand that actually charges the unit while it sits on top of the WiiU system!
The Switch controller actually stands on its own with the joy cons connected to them, but I've decided to actually show the charging station we bought with the joy cons connected to it so that they'll always be charged and ready to go!
>Where are the games?
Behind the controllers! In fact the N64 controller is leaning on a stack of them.
>Cable management? Do you have controller extenders?
Lots of zip ties in the back, and as for controller cables, we bought ~100 of those velcro straps for cords so we can wrap them up for neat display storage without wrapping the cords around the controllers. We also have extension cords for all corded controllers since the consoles don't exactly come out of the unit!
>Where can I get the display case?
It's a piece of furniture so it's a bit expensive, but it's definitely what we wanted after searching for a couple weeks! It's on Amazon
>You could have just emulated it all!
I love having and playing on the original consoles, but emulation is also awesome!
>Where's the Virtual Boy?
It doesn't connect to the TV so I didn't feel the need to get it for this project, but I DO want it for my collection! (Also kids should wait a bit before they play with a 3D device, even the 3DS)
>Where's Nintendo's even older console, the Color TV-Game?/Where's the 64DD?
Those were released Japan only, but I might still want to get them! I believe the controller and the console for Color TV-Game are both one unit, and space is limited, so it might be tough to integrate it if I want to get it!
>Where's the TV? CRT??
Mounted on the wall above the mantle. Sorry, no CRT...yet.
>PHOTOSHOPPED!/I swear I saw this before!
lol why would anyone photoshop this? Definitely real. I'll provide a few more images if I can. And definitely my setup! Though I'm sure I'm not the first to do something similar.
>lol fake niece
The niece and story are real, but if I'm being perfectly honest this is more for me than her haha
What is a "Cable binder" ? A zip tie according to my very grueling research.
Velcro ties work much better. I use these specific cable ties on my racks as well as workstations. They look nice, secure, and easily removable when adding, subtracting, or re-routing.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
These are better
https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_cpS0AbD1AE3AR
100 instead of 50, Velcro brand, great reviews. $6.88
https://www.amazon.com/Cable-Matters-Combo-Self-Locking-12-Inch/dp/B00L2LGMO4/ref=pd_lpo_23_bs_t_2?_encoding=UTF8&psc=1&refRID=CXQF9ZBEYSWY2ZNBXP3P
so you can have white laces too
I was like, damn that is clean. Then I seen all the cables crammed under the desk. The only thing you need is some Polyethylene wire tube and some cable velcro and you're set for life.
Better than zip ties, use Velcro straps. This way, if you need to swap cables in or out, you're not having to clip your zipties and use new ones. These are the Velcro straps I use (and they work great!): http://www.amazon.com/gp/aw/d/B001E1Y5O6/ref=mp_s_a_1_1?qid=1419952299&sr=8-1&pi=AC_SY200_QL40
Zipties suck.
I've been using Velcro cable ties for a few years now. It's easy and cheap to pull out or ad in another cable. I find it helps more than you think because it reduces the friction required to make it look right.
I also use sleeves like this and this, a few wraps, and raceways. For raceways, I have this, but I'm not 100% happy with it and may switch to a basket one of these days.
I also see a lot of cables that are way too large for the space. Pick up a few short cables and remove that bulk. You don't need to go crazy with this, just pick the worst offenders.
Beyond that, focus on cleaning up the points where cables join or split. A loop hook or brace in the right spot can really clean things up. Try to have a single point where cables go to the window/closet. Have a single point at the desk that all cables going into the PC go through.
You know those velcro cable ties? my sister uses those on "many straps" to bundle them up into one strap, then unvelcros them when she's done putting on a dress/top/etc.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
There' only a couple of bucks.
you should get the tywrap gun or zip tie gun, perfectly tensions the cable that you set and cut sit when tension is reached. Cuts super flush no sharp edges and can operate with one hand.
https://www.amazon.com/Panduit-GS2B-Controlled-Tension-Cut-Off/dp/B001EU2558
stupid expensive yes but the one i have saw daily use over a decade and zero issues still. At first i had the harbor freight one and its crap. This is one of those buy it once for life tools and since your cabinet building its a time saver and would make your job so much quicker. Might be able to get your boss to order one and try it out and have them as company tools.
I think the cheapest possible somewhat viable solution is steel zip ties.
They sell steel zip ties that have a tensile strength of close to 200lbs. Just wrap those around the frame where the bolts were, they should hold you just fine. I used to make signs, and we used zip ties similar to these to hold signs in windy places, and they are seriously strong.
https://www.amazon.com/SunplusTrade-Stainless-Exhaust-Multi-Purpose-Locking/dp/B072WC1MXT/ref=sr_1_3?keywords=steel+zip+ties&qid=1569682553&s=gateway&sr=8-3
It will look even better with this and 15 minutes of your time!:
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ref=sr_1_3?s=electronics&ie=UTF8&qid=1543082742&sr=1-3&keywords=8+inch+velcro+cable+ties
Let me just start off by saying, even with just the few hours I've played with it, I LOVE this thing. Thank you valve for making such an awesome piece of hardware. And yes, my unit does have the joystick issue but it's just the feedback that's broken. My joysticks otherwise register without issue.
But anyways onto the good stuff.
What?
A 20m (65ft) cable run from my desk to right under the couch, so that the only hookup is the breakout / trident cable.
Why?
In my place, I ran into the predicament of the only space I had room to do VR was the living room, but given that putting my entire desk in the living room would have been weird aesthetically, I opted for the cable run, to get VR from the PC in the room across the house to my living room.
What parts?
Pretty simple actually, but it did require 2, not exactly cheap cables, and one coupler (prices in US Dollar).
The DP - DP coupler is out of necessity, given that no link box exists with the Index. Yes, it's an expensive solution. In addition to the $999 headset, I've spent another ~$231 on cable runs. But for my situation, it works flawlessly.
If you are thinking you need a solution like that, and any of the cables are unavailable (the DP cable is out of stock as of writing on July 6th), make sure to get fiber if you can for the sake of not losing quality over a copper cable. As for the USB cable, you're looking for an active cable. These typically have external power bricks to supply additional 5V power that your tower cannot do over such a distance. Edit: _However_, I have found that plugging in the additional power causes the computer to have issues recognizing any USB device, so I guess don't do that if you buy the same cable. Other cables may vary.
How is it setup?
I have the cables running along the basebords of the house, from my computer all the way to the living room. They take a right angle, and are gaff-taped down to the floor before running under the couch where they can become a loose coil [pic].
Does it work?
In a word, yes! I will update this comment if I run into reliability issues down the line, but it seems that this system works well enough, and has the added bonus of not hearing the PC fans spinning given the off-ear design of the Index headphones. (Edit: The only pitfall is that sometimes you have to power cycle the headset once or twice to get SteamVR to see it, but that doesn't take long. After that it's smooth sailing!)
Hope this helps anyone that might be needing a similar setup!
(EDIT: Numerous edits for spelling / grammar)
Parts List & More
Type|Item
:--|:--
Case|IN WIN 101 Mid Tower High Air Flow Gaming Case w/ Tempered Glass Full Size Window (White)
CPU|Intel® Core™ Processor i7-7700K 4.20GHZ 8MB Intel Smart Cache LGA1151 (Kaby Lake)
Case Fan|3x 120mm AZZA Hurricane RGB Fans
CPU Cooler|Thermaltake Floe Riing RGB 240mm Premium Edition Liquid CPU Cooling System w/ Copper Cold Plate (2 x Standard 120MM Fans)
SSD|240GB WD Green Series SATA-III 6 SSD
HDD|Seagate 3TB 64MB Cache 7200RPM SATA III 6.0Gb/s
RAM|XPG Z1 Gaming Series 16GB DDR4-3000 Dual Channel DDR4 Kit, CL16 (2x 8GB), White
Motherboard|ASUS ROG Strix Z270E Gaming ATX w/ RGB, USB 3.1, 3 PCIe x16, 4 PCIe x1, 6 SATA3, 2 M.2 SATA/PCIe
OS|Windows 10 Home (64-bit Edition)
Power Supply|600 Watts - Standard 80 Plus Certified Power Supply - SLI/CrossFireX Ready
Video Card|GeForce® GTX 1060 3GB GDDR5
Monitor|Dell S2415h 24-Inch x 3
Monitor Stand|VIVO Single Stand & VIVO Dual Stand
Headset|Steelseries Arctis 7
Headset Stand|Avantree Universal Aluminum Desk Headphone Stand Hanger with Cable Holder
Keyboard|Logitech K780 Multi-Device Wireless Keyboard
Mouse|Logitech MX Master 2S Wireless Mouse (White)
Webcam|Logitech HD Pro Webcam C920
Plants|Artificial Plants, Amyhomie Set of 4 Mini Fake Succulent Plants
Desk|98x1 1/8" EKBACKEN Kitchen Counter Top resting on two White ALEX Drawers. There's also two OLOV White Adjustable Legs underneath for support.
Laptop|Apple 13" MacBook Air 256GB SSD 2015 Model
Laptop Stand|Vertical Laptop Stand Holder by MOTONG
Laptop Skin|Solid State White Skin by DecalGirl
Mini Fridge|Danby DAR017A3WDB Contemporary Classic Compact All Refrigerator, White
Lamp|Studio Designs 12024 Swing Arm Lamp, 13-watt, White
Lamp Bulb|TP-Link Multicolour Smart LED Bulb
Wallpaper|Nathan Nyx on ArtStation
Wall Scrolls|Tokyo Ghoul, No Game No Life, Attack On Titan, Seven Deadly Sins
Console|Nintendo Switch - Gray Joy-Con
Console Skin|Solid State White by DecalGirl
Controller|Nintendo Switch Pro Controller
Cable Management|Reusable Velcro Cable Ties, 2 x White Cable Raceway Channels, and 2 x White Cable Box
USB Charger|RAVPower 60W 12 A 6-Port USB Charger
Router|Linksys Velop Tri-band Whole Home WiFi Mesh System 2-Pack
Trash Bin|FILUR (White)
How about stainless steel zip ties for extra super fun times.
Nice idea
Get yourself some velcro ties and do some cable management. That's the difference between a 'mess of wires under the floor' and a 'holy fuck cool looking hidden computer shit under the floor'...
Use ones she can't just pull apart:
https://www.amazon.com/Vktech-100pcs-Stainless-Exhaust-Locking/dp/B00CTKBTH2
Last piece of advice.... Let your EdgeRouter breathe... don't stack stuff on top of the poor thing. :)
100 pack for $5. I added them right back to my want list almost immediately after I opened the package.
That works too. You can get a 100-pack on Amazon for $10. Don't think I'd want to use velcro on internals, however.
He got a Duc. Buy him a tool kit!! (Don't crucify me!)
But seriously...buy him a roll of velcro zip ties: Amazon link
You have no idea how useful these things are until you need them. They are reusable, work in the wet, don't mark anything, can be strung together, and they don't look shit.
I also second the emergancy tire kit: Amazon again
https://www.amazon.com/dp/B006ISG5M0/
It’s a zip tie gun. You set it to how tight you want it and it cuts off the excess flush.
Learn how to properly roll cables over-under. This especially applies to long cables like AC extension cords, XLR cables, etc. Doing this type of wrapping in the OP will fuck up your cables pretty quickly if you use them a lot - again, especially when it comes to things like long power cords. Here's a quick demo video.
Also these velcro cable ties are great. Put them on everything you wrap and unwrap frequently.
People keep recommending zipties and I'm just like ya'll should be using velcro.
Aw thank you! (:
It's all about personal preference as to what you want to use, but I used Velcro cable ties, cable sleeves, and sticky cable clamps for both my battlestation and my TV/console station. I bought these in particular and they do just the trick for me at very low cost.
Ties: VELCRO Brand ONE WRAP Thin Ties | Strong & Reusable | Perfect for Fastening Wires & Organizing Cords | Black, 8 x 1/2-Inch | 100 Count https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_l3bJBbHE1JZZS
Sleeves: 20" Cable Management Sleeve with Free Zip Ties https://www.amazon.com/gp/product/B01MR6QQLR/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Clamps: eBoot Adjustable Cable Clips Adhesive Nylon Wire Clamps, Black, 50 Pack https://www.amazon.com/dp/B01LYO307S/ref=cm_sw_r_cp_api_J3bJBbRA9GWRQ
Stick some clamps behind your desk and down the edges of the desk legs to run the wires and cords along them. Just be warned that the residue may stick and might peel off paint or wood, so take caution if you want to tear them off. I'm sure you can find better ones that don't potentially damage your desk, but with proper removal care, you should be fine.
I like the velcro straps because they can easily be adjusted, removed, and reused. They're also versatile for any other random cables you want to store.
EDIT: Added some pictures of the back where the cables are to show you how messy and hectic it is.
https://imgur.com/a/Zqin1bj
$2 cheaper for longer & better quality https://www.amazon.com/gp/product/B001E1Y5O6/ref=crt_ewc_title_huc_1?ie=UTF8&psc=1&smid=ANMG9JKN0R2VN
What I like to do is zip them together in bundles, and then use anchors to keep them in place. Of course, this is semi-permanent, so not great if you keep changing your configuration or moving components. For a less permanent solution, velcro cable ties are great for at least bundling the cables.
Personally I use these cable ties with this wrapping method.
Edit: wow, I didn't expect a response. I'm glad others do this as well. Some may think it's overkill, but I want my stuff to last a very long time.
or you get https://www.amazon.com/Pasow-Reusable-Fastening-Organizer-7-Inch/dp/B0154MS9Q0
velcro cable ties would also help to organize your cables.
Been using these in my home and they've been great
Honestly the best thing you could do for your setup right now is cable management. You can get reusable velcro zip ties from Amazon or Walmart or someplace like that. I’d also recommend getting little figures or plushies of your favorite characters to add some more of your personality to the area
Over $160 on Amazon. Ouch.
Edit: Or if you really want to splurge, almost $240.
I believe these ties are what you're referring to. I bought them for cable management behind my entertainment center, and ended up also using for cable management in my pc build. They worked great!
I use these and they work great.
Pasow 50pcs Cable Ties Reusable Fastening Wire Organizer Cord Rope Holder 7 Inch (Black) https://www.amazon.com/dp/B0154MS9Q0/ref=cm_sw_r_cp_apa_i_RtCwCbSN8YA27
Behold! The Lord will give you the answer!
http://www.amazon.com/Bluecell-Releasable-Reusable-Organization-Management/dp/B008OC2EE6
exactly what i thought, and i have these
Honestly it's not as hard as you might think. Even my PC setup with a standing desk has 1 cable. Just a few dollars on amazon and about 15 minutes of time and here are both setups: https://imgur.com/a/HnUZotv
​
Cable tray: https://www.amazon.com/Monoprice-Under-Desk-Cable-Tray/dp/B07H48SY8G/ref=sr_1_9?keywords=cable+tray&qid=1569203550&s=gateway&sr=8-9
Clips: https://www.amazon.com/gp/product/B075Y9J42T/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Strip Cord: https://www.amazon.com/gp/product/B0036DEC48/ref=ppx_yo_dt_b_asin_title_o09_s02?ie=UTF8&psc=1
Servers:
Networking:
FreeNAS Server Case:
https://www.amazon.com/gp/product/B0091IZ1ZG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Rack:
https://www.amazon.com/gp/product/B06XZWJPHG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Rackmount Power:
https://www.amazon.com/gp/product/B00077INZU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Extras:
https://www.amazon.com/gp/product/B008X3JIVS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B002D1GG0C/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0060RUVBA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o09_s03?ie=UTF8&psc=1
I have about 400 velcro zip ties in my bag that I use instead of normal zip ties. The guy after always appreciates it.
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
The "Type" of cable fastener absolutely does make all of the difference depending upon the application.
In many applications cable or "zip" ties are not allowed due to toxic fumes given off when they are heated. Many users tend to over tighten cable ties thus damaging the cable jacket or conductor vs velcro.
In the case of aircraft or high vibration scenarios the type of cable fastener used is highly regulated.
In the end remember there are Redditors from around the globe here that are not only home users but also many that work with cable fasteners day to day in the work that they do. I have been known to post a link to this set of velcro from Amazon to those that complain about price.
If this were my setup I would cringe at the crimped coax cable. It's totally worth redoing, using a compression fitting instead. Those tools can be found at your local hardware store, online or just befriend a cable guy and hand him a few bucks to remake the end. It will take him a minute or less.
Thx OP for the post, IMO anything better than a nest of cables is better in the end. I highly prefer velcro.
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
I'm sure most of you are familiar with VR cover mod and head strap.
But even after both modification, I noticed that the headset still feel "lose" at the button half, and I always get better image quality and clearity if I push the headset closer to my face/nose from the bottom.
The solution was pretty easy, I used this Velcro tape and this Velcro tie, both links are Amazon Canada, but if you search or "Velcro Brand" you should be able to find all their products, they are a pretty established velcro products company.
And now I can finally enjoy the best image quality and this actually relieved much more pressure on my forehead compares to just the VR cover foam + head strap. Definitely recommend to try it out as it doesn't cost much.
Hope Samsung can improve the comfort in their future VR headset, it's just pure laziness that they can't spend a bit more time to come up with a solution...
Let me know if you guys have any questions.
Over under is all I know, every company I've ever worked with, as well myself personally, use over under exclusively. Skip the "garden ties" and get these or opera knot some tie line on the cables so you can keep them tidy.
https://smile.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/ref=smi_se_mit_rcol_smi_2537928482?_encoding=UTF8&*Version*=1&*entries*=0&pldnCmp=rcol&pldnCrt=my-impact
100 pack
Alright I'll be the first to say it... You're going to hate that you used zip ties. Any time you need to change anything, you have to cut and refasten new ones. They also can damage wiring.
You should have used velcro ties: https://smile.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ref=sr_1_3?keywords=velcro+ties&qid=1564609258&s=electronics&sr=1-3
Buy yourself a 100 pack of these for $12.99:
https://www.amazon.com/gp/product/B00O9VKVFK/
If you need to change or adjust anything, it's easy and velcro won't leave marks on your cables like Zip ties can when they are too tight against the cable.
http://www.amazon.com/gp/product/B001E1Y5O6
Or spend $5 and get 100 velcro ones that will hold up better...
For the Canadians among us.
-label maker
-headphone hangers
-another vote for the Fethead!
-velcro cable ties
Not sure why my links came out all fucked up? Too lazy to try and fix it.
His.
Monitors: [Dell S2716DGR] (https://www.amazon.com/gp/product/B0149QBOF0/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1)
Triple Monitor Mount: [EZM Deluxe Triple Monitor Mount] (https://www.amazon.com/gp/product/B006JG7G2E/ref=oh_aui_detailpage_o06_s06?ie=UTF8&psc=1)
Keyboard: [Corsair K70 Cherry MX Reds] (https://www.amazon.com/CORSAIR-K70-Mechanical-Gaming-Keyboard/dp/B01ER4B8C8/ref=sr_1_2?ie=UTF8&qid=1526665446&sr=8-2&keywords=corsair%2Bk70%2Bcherry%2Bred&th=1)
Mouse: [Corsair Scimitar Pro RGB] (https://www.amazon.com/Corsair-Gaming-SCIMITAR-Mechanical-Buttons/dp/B013KK9JOO/ref=sr_1_2?s=electronics&ie=UTF8&qid=1526665487&sr=1-2&keywords=corsair+scimitar+pro+rgb)
Mouse Pad: [Razer Goliathus Overwatch Mouse Mat] (https://www.amazon.com/Razer-Goliathus-Overwatch-Mouse-Professional-Grade/dp/B01DXVKEJY)
Wireless Headset: [Steel Series 800 Wireless] (https://www.amazon.com/SteelSeries-Lag-Free-Wireless-Transmitter-Surround/dp/B016YGMH9U/ref=sr_1_3?s=electronics&ie=UTF8&qid=1526665568&sr=1-3&keywords=steelseries+h800)
Speakers: [Audioengine A5+] (https://www.amazon.com/dp/B005OSR1C8/ref=twister_B00L3KRZS6?_encoding=UTF8&psc=1)
Speaker Mounts: [Audioengine DS2 Desktop speaker stands] (https://www.amazon.com/gp/product/B005STCILC/ref=oh_aui_detailpage_o06_s04?ie=UTF8&psc=1)
Desk Surface: [Ikea EKBACKEN countertop 98in] (https://www.ikea.com/us/en/catalog/products/80274864/)
Desk Drawers: Haha who am I kidding everyone knows that those are!
Lamp: [IKEA Hektar lamp] (https://www.ikea.com/us/en/catalog/products/40349376/)
Cable Management
[Raceways] (https://www.amazon.com/gp/product/B0015EDVVU/ref=oh_aui_detailpage_o06_s06?ie=UTF8&psc=1)
[Velcro zip ties] (https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o06_s05?ie=UTF8&psc=1)
[Desk Grommet ](https://www.amazon.com/gp/product/B000MX5TH4/ref=oh_aui_detailpage_o06_s05?ie=UTF8&psc=1)
[Cable clips] (https://www.amazon.com/gp/product/B075WWCN1K/ref=detailpage?ie=UTF8&psc=1)
Pc build specs
Case: NZXT H440
Motherboard: ASUS ROG Maximus IX Hero Z270 LGA1151
CPU: i7 6700k
RAM: G.SKILL TridentZ RGB Series 32GB
Power supply: Corsair RM series modular 1000W 80plus Gold
Power cables: Corsair custom sleeved in blue
CPU cooler: NZXT Kraken X52
Boot Drive: SAMSUNG 750 EVO 2.5" 500GB
HDD: 2TB Western Digital
GPU: EVGA 12GB Titan black
Hers.
Monitor: [Asus ROG Switft 34in ultra wide] (https://www.amazon.com/ASUS-ROG-SWIFT-PG348Q-3440x1440/dp/B01C83BE6U/ref=sr_1_fkmr0_1?ie=UTF8&qid=1526666082&sr=8-1-fkmr0&keywords=Asus+-+ROG+Swift+34%22+IPS+LED+Curved+QHD+GSync+Monitor+-+Armor+titanium+Plasma+copper)
Monitor Mount: [VIV duial mount] (https://www.amazon.com/gp/product/B01CUW5HDU/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1)
Mouse: [Razer Naga Chroma] (https://www.amazon.com/Razer-Naga-Chroma-Programmable-Adjustible/dp/B01798WKTY/ref=sr_1_4?s=electronics&ie=UTF8&qid=1526666200&sr=1-4&keywords=razer+mmo+mouse)
Keyboard: [Corsair K70 Cherry MX Reds] (https://www.amazon.com/CORSAIR-K70-Mechanical-Gaming-Keyboard/dp/B01ER4B8C8/ref=sr_1_2?ie=UTF8&qid=1526665446&sr=8-2&keywords=corsair%2Bk70%2Bcherry%2Bred&th=1)
Mouse pad: [Razer Goliathus Overwatch Mouse Mat] (https://www.amazon.com/Razer-Goliathus-Overwatch-Mouse-Professional-Grade/dp/B01DXVKEJY)
Wireless Headset: [Steel Series 800 Wireless] (https://www.amazon.com/SteelSeries-Lag-Free-Wireless-Transmitter-Surround/dp/B016YGMH9U/ref=sr_1_3?s=electronics&ie=UTF8&qid=1526665568&sr=1-3&keywords=steelseries+h800)
Speakers: [KRK Rokit 5 ](https://www.amazon.com/KRK-RP5G3-NA-Generation-Powered-Monitor/dp/B00FX7MMRO/ref=sr_1_1?ie=UTF8&qid=1526666262&sr=8-1&keywords=krk+rokit+5)
Desk Surface x2 : [IKEA Linnmon] (https://www.ikea.com/us/en/catalog/products/S39932699/)
Cable Management
Cable Rack: [IKEA Signum rack] (https://www.ikea.com/us/en/catalog/products/30200253/)
PC Build specs
Case: Corsair crystal series 460X
Motherboard: ASUS ROG Maximus IX Hero Z270 LGA1151
CPU: i7 7700k
RAM: G.SKILL TridentZ RGB Series 32GB
Power supply: Corsair RM series modular 1000W 80plus Gold
CPU cooler: NZXT Kraken X52
HDD: WD 1TB
GPU: GTX 1080 ti SC
Get the ties that velcro, they work just as well and if you need to move something around its easier. Example:
https://www.amazon.com/VELCRO-Brand-2-Inch-Count-Black/dp/B001E1Y5O6
Get some velcro cable ties; tie everything headed to a common component together. ie. all the power cords conecting to a certain power bar, tie them together. All the HDMI cables connecting to the TV, etc.
All the cords going to the right-hand side of the entertainment unit, bundle them together and tie them to the unit's centre-right vertical support column/leg (preferably the one in the back). White velcro cables ties might blend in better here. Do the same for the centre-left column/leg and components on that side.
For the big rat's nest in the back, bundle the surplus power brick cord lengths together with cable ties and either hide the tied bundles behind the component it powers, or tuck it under the entertainment unit out of sight.
Snip the surplus ends of the wrapped cable ties so they are neat and not rolled up into little cinnamon rolls.
Because the entertainment unit is so open, you're not going to be able to completely hide everything. It doesn't all have to be hidden, it just has to look organised.
Then get the black zip ties. Or jazz it up with some colored ones instead. This is your world. You are the creator.
100 Pack (enough to do your home, office, and your friend's cubicle) is $6.99.
Seriously, skip lunch one day, buy this, and finally get organized.
I use a combination of cable drops / cable clips, cable ties, and cable sleeving.
https://www.amazon.com/Strip-Stainless-Steel-Locking-Cable/dp/B004C3C22K
Nah fam.
steel zip ties
I found this looking up “desk cable clips” on amazon
That's the thing though... Velcro is hardly more expensive... Especially considering the advantages it offers.
It seems that your comment contains 1 or more links that are hard to tap for mobile users.
I will extend those so they're easier for our sausage fingers to click!
Here is link number 1 - Previous text "1"
Here is link number 2 - Previous text "2"
----
^Please ^PM ^/u/eganwall ^with ^issues ^or ^feedback! ^| ^Delete
Mother of god....
If I ever came over I would lock you out of the house and have my way with your wires and a 100 pack of Velcro Ties
LOL! The dirty secret?
I have two cats, brothers, Mario and Luigi. Luigi's mellow, never a problem. Mario likes to chew on things, the more expensive and less replaceable, the better. After the second mouse and a set of reference headphones lost, I'm now religious about neatly cabling everything lest he get the idea that my patch cables (or the USB ones for that matter) are there for his amusement.
Velcro ties are your friends, best thing ever. I learned to like them about 20 years ago on my first civilian job post military, wiring up computer labs in schools - they're absolutely fantastic and so cheap you'll be embarrassed you don't already have some. I get mine from Amazon 100 at a time for about $10.
​
https://www.amazon.com/gp/product/B001E1Y5O6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I bought a bag of these Velcro Straps and it was easily one of the best things I bought for cable managing.
They are velcro cable ties I got here. I love them. I simply used a staple gun to attach them to the back frame of the desk, and then routed all the cables along the edge in one bundle.
These...
https://www.amazon.com/Strip-Stainless-Steel-Locking-Cable/dp/B004C3C22K
For the love of God (and future sysadmins): http://www.amazon.com/Eastwood-Professional-Cable-Wire-Tie/dp/B006ISG5M0/
Since you can't screw anything into the desk, here's what I would do:
Grab some of these while they're on sale
Then grab some 3M Command Strips to hold up some sort of cable raceway like this (Although you can probably find something cheaper than this particular one at Lowes or Home Depot.)
Or you could just buy a few of these
Or a cable box like this. Personally, I'd go with the box and velcro strips, since your tower is so close to the outlet. Unless you plan to relocate it.
But most importantly for college dorm life: 3M command strips are your friend for almost everything.
https://www.amazon.com/Pasow-Reusable-Fastening-Organizer-Holder/dp/B0154MS9Q0/
Get yourself these. They're fantastic. (50 might be excessive, but you know you're gonna lose half of them)
usb-a to usb-b cable
​
a couple of headphone jack adapters
​
ground wires if you're dealing with vinyl
​
interference suppresion filter clips
​
ethernet cable
​
and a bunch of these
And these... www.amazon.com/dp/B075Y9J42T/ref=cm_sw_r_cp_api_i_UPzOCb53ZTC7Z
Velcro straps - All Day Every Day
Here is a pack of 100 for $5 http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6
I'd probably by some zip tie anchors (should be available at your local hardware store in various sizes) and put those on the back side of the desk frame and use velcro straps to attach wires to those anchors. As long as you keep everything along the backside of that black frame, you won't really be able to see the wires as much.
For the speakers on the shelf. Personally, I'd move them down to the desk, you'll get a better listening experience that way because right now, they aren't only above your head, but they are angled up, so most of the sound is just going into the ceiling. Putting them on the desk would be a more optimal height, and allow you to hide the chords better. If that isn't an option, I'd get slightly longer speaker wire and run both wires straight up the center so you only have 1 line, then once they get behind the shelf, split them off there and run it behind the back edge of the shelf.
Try screwing one of these to the bottom side of the desk right next to the hole.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
http://i.imgur.com/8kvZP.jpg - another angle
Fun fact: I bought a pack of 100 Velcro cable ties, and used 90 of them yesterday.
Fun fact: the FMV of the GameCube box is over $400 with a component cable, two Hori digitals, and four Wavebirds.
I use this one. It's very popular velcro ties.
https://www.amazon.com/gp/product/B001E1Y5O6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Velcro (or similar adhesive) strips for the win! Amazon offers a 100 ct. package for $10 USD.
So bummed this isn't a thing, except every post would be "TIL (today i learned) LEMON JJUICE IS PERSERVATIVE?!" and now I'm relieved it's not. Because we all know there's one and only one bar hack.
https://www.amazon.com/DTOL-Plastic-Cable-100-Pack-Black/dp/B002C0SKBW
Things I feel are a must:
Useful extras:
--EDIT--
My order of assembly:
Hey, heads up on modern bulbs.
I started doing this about five years ago when not as many LEDs were used, my first with a Space Bucket is here from about four years ago, and some are now using a lot more LEDs in the bulbs. I did remount some of the LED modules for side lighting. I'm going to modify the article with a disclaimer.
The problem with more LEDs is that they are each ran in series, each LED needs 3-3.3 volts, so in some instances you are going to be exposing voltages that are going beyond safe levels by removing the cover. This should be isolated DC voltage, not AC line voltage, but keep in mind that with more than 15-20 LEDs that you can have a shock hazard.
Big Clive on YouTube has shown that they might not always be isolated from ground.
https://www.youtube.com/watch?v=rNf6VSj6M-E
Shock hazards are most serious when it's a hand to hand shock since the current path can go through the heart and 50mA is when things can start becoming lethal.
Also I found that if the LEDs become disconnected from the power supply that the power supply voltage floated up to about 170 volts which in 120 volt AC nations is the peak voltage that you would get with a rectified capacitor. You have to be aware of this particularly when doing major modifications to the bulb.
It can be done safely but insulation is the key.
Also, don't use hot glue with power electronics. You can use 5 minute epoxy instead and give it 5 hours to cure.
edit spelling
/u/MrSparkleBud is using modules with 10 LEDs and his setup looks pretty safe. The hot glue is being used in areas where there would not be an expected heat build up. Adhesive cable tie mounts with tiny cable ties would still be a much better option as they provide really good strain relief (as an electrician I used a lot of these). Those now exposed power supplies still have line voltage on them, though, but it's obvious he has experience doing stuff like this from the very neat layout.
Make sure the line voltage splicing is soldered/taped and not just twisted with line voltage. Be sure to use Scotch Super 33+ tape if you can get it and not cheap, generic tape. Home Depot etc will have it for about $3 as well as the cable mount stuff.
Wire nuts are preferred for line voltage splicing.
It's a mount for a zip tie/cable tie.
Not that you plan on changing it up too much, but I would recommend replacing the zip ties with velcro ties instead. That way if you ever have to take them off, you don't risk snipping a cable by accident. Ask me how I know :(
Get VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) instead of zip ties.
You may need more sata cables if you have more drives you’re adding in.
If you’re going for aesthetics, some led strips and cablemods will go a long way with that.
Maybe some different fans than the stock ones if you want lights in them perhaps.
As far as building it goes, the only thing I can think of that you might wanna worry about is to enable a profile to get your ram running at the speed it’s rated for and be sure to plug something into the cpu fan header so you don’t get an error on post
I recommend something like these velcro wire wraps to bind your TV's cables together to make it look way cleaner. Either that or some cable raceways.
Though I admit I'm a bit crazy when it comes to cable management.
You cannot go wrong with these guys. I use them for so much stuff.
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_6?ie=UTF8&qid=1370462607&sr=8-6&keywords=velcro+strips
I like these, personally. Lots of stores carry them.
Velcro ties, then organized however you like without worrying about tangles.
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/
velcro ties. Something like this: https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=pd_lpo_229_bs_tr_t_2?_encoding=UTF8&psc=1&refRID=AW2FABYWJ6TYBNEDMMZ7
Actually look at the picture. There is clearly something anchored to the underside of the shelves which they're tied to. Since you really can't use nails or screws they basically have to be self adhesive. About two minutes of googling later I found these. They don't look exactly like what he's using, but close enough.
Really just try thinking about it.
Repost, imgur ate the first image album.
I just finished a second crash cart for my SO, and this time I kept track of the parts I used during assembly. So as a gift to the VR subreddits I tend to follow here's some assembly photos and a full parts list should you want to build your own.
Parts list:
(1x) HF / USG Rolling Toolcart $99 with coupon - https://www.harborfreight.com/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
(1x) Asus VP239H-P Monitor - https://www.newegg.com/Product/Product.aspx?Item=2W2-000Y-00007
(1x) VESA mount - https://www.amazon.com/gp/product/B000VKCIJU/
(6x) Rubber Grommets (requires 1 1/2" bi-metal hole saw) - https://www.amazon.com/Heavy-Rubber-Grommets-Inside-Diameter/dp/B06XKJ4NRF/
(1x) PRIME Power Strip - https://www.amazon.com/gp/product/B003DKJ2VC/
(1x) Best Buy - 9' VR Cable Extension - https://www.bestbuy.com/site/insignia-9-vr-extension-cable-black/5706844.p?skuId=5706844
Additional parts required:
(4x) 1/4" x 3/8" steel rivets (requires rivet gun) - https://www.amazon.com/Surebonder-FPC86S-100-4-inch-Medium-Rivets/dp/B001C2FW3A/
(2x) 1/4 x 20 Rivet Nut for attaching the power strip. (Requires nut setting tool) https://www.amazon.com/uxcell-Plated-Carbon-Nutsert-4-20UNC/dp/B00X74FNVW/
(2x) 1/4 x 20 x 3/4 button cap hex screws - https://www.amazon.com/uxcell-Inch-20x3-Socket-Button-Screws/dp/B015A3ABL4/
1 x 1 cable tie mounts for dressing the wiring inside the toolchest - https://www.amazon.com/Darller-Adhesive-Cable-Mounts-Holders/dp/B071WW8P83/
4" cable ties, black - https://www.amazon.com/C2G-Cables-43036-4-Inch-Cable/dp/B0002GX1XA/
And lots of blue loctite for all the fasteners during assembly.
Optional but makes life easy:
Logitech K830 wireless keyboard - https://www.amazon.com/Logitech-Illuminated-Living-Room-Keyboard-Touchpad/dp/B00ZOPVSKW/
The last 7 photos are from the first VR Crash Cart I built to help illustrate some of the assembly steps involved.
Zip ties. Various sizes.
Once everything is connected, try to find places where you can anchor a zip tie to tidy things up. It's usually pretty easy around unused drive bays. If there's no place at all to put one, you can use these.
Oh Bloody Hell!
Alien Ant farm?
these would be helpful for my mom to keep all her cords straight!
If you spend $0.84 cents more you can get these, which are the best thing Amazon sells.
Those are some expensive damn Velcro straps!
I use these which I got off amazon for around $10/100.
And I’ve used nearly half already. Also used for my entertainment center management.
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
I personally use these velcro for cable management. Just be creative with it :P
These are also pretty awesome: http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1457283089&sr=8-3&keywords=velcro+cable+ties I originally bought them for personal use but also use them for electronics I sell.
It sounds an awful lot like you could probably reduce all that down to one server. Not saying it to be mean I just think you can reduce your power bill quite a bit and have the extra machines as failover.
Especially with the Mac Mini there are ways of getting OS X to run on hyper-v or esxi. I know a lot of people use them for home automation.
Also please buy some Velcro - https://www.amazon.com/dp/B001E1Y5O6/
Even if this was setup by Comcast, I would have gone in there and did some cable maintenance.
Masking tape, crimped/cut cables, zip ties, all needs to be pulled out and properly tied up with some velcro straps. w
If you haven't already, invest in some Velcro Straps
The Velcro cable ties I ordered from Amazon were the best music related purchase I made in 2014.
I have a power strip located on the underside of the desk that powers the PC, 3 monitors, and speakers. It is held in place by a cable management net that comes included with the Ikea Bekant desk.
I used a lot of velcro ties to group up any cables coming from a similar area. You can get a pack of 100 ties on Amazon for $10. Once they were grouped I kinda just threw them into the cable management net, there's probably a more elegant way of doing it, but I didn't want to spend even more time trying to do that 😅
Here are some pics of how I did it
If you're looking for something that's more permanent for the HD mounting try these out. I find that over time (a few months) rubber bands start to crack, fall apart, and become glued to anything they are touching, especially if whatever they are touching is warm.
Here, take these! You need them...... all three.
This will help you clear up most of that and these will take care of most of the rest.
If those are random cables going into the wall, then get a keystone jack or something.
Not on sale, but if I were you I'd invest in these: https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6 Velcro, but loops on itself like a zip tie for easy tensioning.
Good to go! Nice setup. I'd probably suggest 2 things:
-Velcro wire ties for the cabling
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6/
-DuetDisplay for the iPad. I have it for my surface and ipad and it's been awesome. Turns your iPad into a portable second monitor And it keeps the touch capabilities of the iPad.
https://itunes.apple.com/us/app/duet-display/
These are what we use to organize cables for clients at my IT job. They are also very reasonably priced.
I've been using these for years.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
They've served me well, and are easy to work with. I've used cords, other straps, dealt with venues that tie the XLR to itself(shudder), etc.
I use the orange cable reels for the majority of my cables now, but still use these straps with what doesn't go on the reels.
What if you need to add capacity, move a cable due to a bad port, upgrade to device with a different port configuration? What about tracing bad cables during bring up? What about the ties putting too much pressure on the cable causing it to break a fiber or go out of spec with regards to impedence?
These are the way to go: https://smile.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6?sa-no-redirect=1
You can buy them cheap in bulk, they work just as good as plastic ties, they won't damage cables and they are reusable.
Your room is really functional, and you're trading off style for function. Honestly, if you really want to make your room look nicer, take the Computer and Musical instruments out, replace the space with some seating, and a small table (maybe with a TV), leave some open space in your room.
As far as what you can do with what you have... Most students are in the same position you are, not a lot of space for our stuff and everything we have is there because it functions well. For instance, that chair that you have is an eyesore, but I'm sure it's comfy and you spend a lot of time in it (I have pretty much the same thing in my room, crappy looking chair, but I love to sit on it; in fact I actually have the same Chassis and speakers as you as well...).
Here's what you can do... Pick a Color Scheme, lose the blinds, and move your desk in front of the window if you're going to keep it. It would be best if you could kind of center it at the window, but I don't see anywhere else you can put your bed.
Your computer is the only thing which can't change color, so go with sometimes like White/Orange, stay away from dull colors and grays, take a chance, paint the walls with orange and white stripes or something(I like orange and white if you didn't notice).
Next, make sure everything is organized. Your room isn't dirty or really messy, but it's cluttered, it looks like everything was just thrown in there. Grab a couple of storage cabinets, shove them in your closet, and throw everything in there that you can bare to not have at arms reach (take some chances, you can always keep something out if you find that you need it too often). Do your best to clear up as much desk space as possible. A desk is not a storage space, it's a workspace, it looks best when it's cleared off.
Thus musical stuff will always look poorly in your room; it has too many wires. If you can find a place to put it elsewhere in the house, that would be best, otherwise, grab these and use them on every cord. Take a second to wind everything up when you're done using it and keep all of the cords out of sight when you're not using them.
Putting some stuff on your walls would be cool too, I like that everything you have up is framed. In my opinion, A few framed items or a lot of unframed items look great on a wall, but I think having a couple of loose posters looks tacky. A few more framed items would be cool (band posters/artwork/movie posters, whatever you're into).
Finally, never understood the rug on carpet thing, especially if it's just another solid color, and especially if that other solid color is black. I would ditch it, if you want a rug, get something colorful and contemporary (this is really the key word for you). The rug is an opportunity to have a centerpiece/focal point/glue that holds the room together, so keep that in mind if you go shopping for another one.
And of course, pick up the chair, clean your closet, put away your vacuum, fix your light bulbs, and pick all that shit up off the floor you lazy son of a bitch...
http://www.amazon.com/gp/aw/d/B001E1Y5O6?cache=1f4347899b187e3ec0b57fb8d0db2f20&pi=SY200_QL40&qid=1408458893&sr=8-1#ref=mp_s_a_1_1
Start with some velcro cable ties like these:
https://www.amazon.com/gp/product/B001E1Y5O6
Sell all your unused gear and then buy 100 packs of these cable ties.
Buy a nice desk.
But really, just sell the gear you don't use. Less is more.
Hey, thats my shop! Glad to see you put your shadow boxes to good use! Your setup looks great and is surprisingly similar to mine (I love that monitor, but I had to return mine a few times to get one without backlight bleed). Maybe I'll post my station later in the week.
About the cables, I don't know if your desk is too thick, but I bought some of those black binder clips from office supply stores and clamped them to the back of my desk, and then I ran wires through them and secured them with velcro straps. Even if that doesn't work, these velcro straps are awesome for bundling wires: https://www.amazon.com/gp/product/B001E1Y5O6
Thanks to everyone else for your interest in my shadow boxes, I'll be working hard to get your orders out and I'll have some new NES scenes up soon as well. Check back this week!
These are great to use for almost any desk, regardless of the location. Pacifically or Atlantic.
If anyone missed out on the velcro ties from last time, theyre on sale again but even cheaper. The product is not sold by Amazon but by a third party seller; 3-BALA.
According to camelcamelcamel, the lowest price was $0.55 however the lowest most recent price was around $2-$3 back in late July-August.
Been using this same tool for 20+ years. It doesn’t work in very tight situations, it does work well when you have enough room to manipulate it into position.
Panduit GS2B Cable Tie Tool, Controlled Tension And Cut-Off, 11.5Oz. Weight https://www.amazon.com/dp/B001EU2558/ref=cm_sw_r_cp_api_i_fXVADbTK81R3E
SCX10 Field Repair Kit
Make a good apocalypse rifle.
Get some Steel Zip Ties to go around the barrel/stock, cover whatever you want in duct tape.
Zombie gun baby
https://www.amazon.com/Strip-Stainless-Steel-Locking-Cable/dp/B004C3C22K
Bit pricey.
Haha, that's usually the reaction I get when I break this bad boy out. I got indoctrinated to them through the aviation business a long time ago, which is where the one in the picture came from. I've also bought these ones from amazon for PC cable management that work very well.
Metal zip-ties exist too!
https://www.amazon.com/Vktech-100pcs-Stainless-Exhaust-Locking/dp/B00CTKBTH2
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/ref=sr_1_4?ie=UTF8&qid=1500377433&sr=8-4&keywords=velcro+ties
Let the cables go down the back of your desk and then strap them all to one and put like a cable housing
Edit: links here that I’ve used for building friends’ setups
https://www.amazon.com/gp/aw/d/B015HWXG4M/ref=mp_s_a_1_1?ie=UTF8&qid=1523807052&sr=1-1&pi=AC_SX236_SY340_QL65&dpPl=1&dpID=41vkEWSQb9L&ref=plSrch
https://www.amazon.com/gp/aw/d/B0154MS9Q0/ref=mp_s_a_1_1/146-3820504-7181516?ie=UTF8&qid=1523807049&sr=1-1&pi=AC_SX236_SY340_QL65&dpPl=1&dpID=51lf5Z18ACL&ref=plSrch
HERE YOU GO! :D
( Example ) Does what it says on the tin. Is adhesive on one side, has a passthrough for a zip tie on the other. Useful for guiding cables along flat surfaces.
( Example ) They tie things. You have to cut them to remove them, but they're stupid cheap. Great anywhere that space is a concern, or anywhere next to a flat surface with mounts.
( Example ) These are best for cables you might change frequently and places where a little bulk is OK. I use them anywhere the cables are hidden, but are coming apart but not away from the hiding surface.
( Example ) These are great in place of zip ties + adhesive tie mounts, because they're easy to open and can hold larger bundles, but not easily bundles as small. So, big sibling metaphor. Oh, and you don't have to cut them to change something.
( Example ) These are basically the same thing, but the "staples" come with the nail in them, but stirrups can use screws. Great for routing single cables, like say, ethernet if it's not in the walls, up to the ceiling, and in the corners all the way to the router. Just don't damage your cable accidentally.
( Example ) These are great for bundles of wire that have to pass a good distance (1ft+) through someplace visible. Spiral of sleeve really depends on context, spirals are fine for all-dark cables, but mixed colors means get a sleeve instead.
( example ): These often come with adhesive backs and you can get corners and intersections and basically hide cables inside a "tunnel" shaped like wall or desk. Oh, there are floor versions too. J-ways are usually just straight strips, but almost perfect for any desk with a vertical back panel.
( Example ) These are good for areas where lots of cables meet. Your surge protector, for example, should go in one of these (preferably the box kind, not the example), and they should be mounted to the wall. Otherwise they're most used for massive networking installations, IIRC. Cable trays are like this, but more open. Use them somewhere hidden, can take the place of loop sticks with longer or thicker cables.
( Example ) These are for basically, getting rid of slack. Or putting your earbuds in your pocket, but slack works great, especially tucked just out of sight with the rod zip tied to an adhesive tie mount.
( Example ) Now this is serious cable management, if you have a drill. Run your cables under the desk, until a central (or several small!) grommets to minimize their visual presence.
Steel.
Metal zip ties are needed for this level of stupidity.
Yes, they can be!
https://www.amazon.com/Bluecell-Releasable-Reusable-Organization-Management/dp/B008OC2EE6
Vktech 100pcs 11.8 Inches Stainless Steel Exhaust Wrap Coated Locking Cable Zip Ties https://www.amazon.com/dp/B00CTKBTH2/ref=cm_sw_r_cp_api_5jWxyb9HVGG1W
Nice, just drop in some zip ties and some other shit into his stocking to take care of cable management to neaten that out.
Lots of these things. Wrap any cables that go from Point A to Point B (same source, same destination) or partway the same (e.g. power cable and HDMI from monitor). Wrap up any excess in a bundle or buy new cables that don't have as much excess. Where applicable, you can also run cables up a table leg to take them off the floor.
Check out /r/digitalminimalism, I play exclusively on PC, so I don't have any games physically lying around.
I've got some velcro straps (like these) that I use to keep all of my cables tidy. Everything behind my monitors is a little messy, but everything is tied together nicely.
An example of a cheap one.
I can't believe it took me so long to learn about stainless zip ties. I bought them for doing a turbo blanket wrap on my MINI Cooper, and ended up finding a lot of uses for them. Thinks like exhaust support on beaters when the hangers rust out, rattling heat shields on cats, etc etc. Something like this
I got them form Fry's. Just zip ties and cable mounts.
Something like this: https://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE
You maybe able to find them cheaper somewhere else.
Damn, I thought that's what they were called I guess the actual term is self adhesive zip tie mounts, here you go fam. Cheers.
https://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE
Here's a short album of my recent 650D build. There are 3 shots from the back from various points in the process. It's a pretty tight fit back there (giggity) and the most difficult part for me was the flat SATA cables. These little suckers made my life so much easier, and I'd highly recommend them. Some round SATA cables would probably help as well.
Better than tape:
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Multi-color/dp/B00144CABS/ref=sr_1_5?ie=UTF8&qid=1520511529&sr=8-5&keywords=velcro+ties
These things in case of high winds...
3 Pair Motorcycle Riding Glasses, or any other "padded sunglasses". They keep the dust out, look decent and are cheap.
12-in-1 Headband, they come in a ton of patterns too. They're better than a bandana and good when it's hot/cold.
VELCRO One Wrap Thin Ties, Black, 8 x 1/2-Inch. I use these things for everything.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
Use these to tie up your cables
We use Velcro cable ties at work and now I use them at home too.
I second the velcro choice. $7 on amazon for 100 velcro ties.
Hey if you want to up your condition presentation game get some of these cheap velcro cable ties - https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6
I did professional cable management for the past 14 months or so. For me and my team this stuff was the absolute shit:
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/ref=sr_1_5?ie=UTF8&qid=1474004500&sr=8-5&keywords=velcro
Anytime we would start running low we'd all start hoarding it to ourselves like it was toilet paper after the apocalypse. We also had some techniques like creating a cable sausage where you fold the cable into a sausage, velcro the center, slide the wrap to one side of the sausage then strap another piece to the center and slide that out to the other end of the sausage. Was a handy trick I still use at home.
You might have tried this already, but how about instead of your back to the wall, the desk goes up against the same wall? This will help with the following:
You are both wrong.
Velcro zip ties FTW.
Superior.
Here are the parts I used:
The cable raceway and the cable clips made the biggest difference. In the past I would just use the velcro strips, which would help with making the cables look more clean, but not with hiding them altogether.
The process I used was:
Fixed your link
I would run all cabled directly off to either the left or right side, bundle them and then run them over the top and down the other side.
Consider getting an arm or something else to avoid messing the whole thing up when you pull out the server on the rails. You can kind of wing it without one though.
Velcro strips comes in real handy for cable management. Having 100 of those hanging off the sides makes it really easy to gather up the cables and redo them when adding equipment. They don't look quite as nice as plastic strips, but it is just so much more enjoyable to work with for projects like this.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
Similar ones can be bought on AliExpress for peanuts if you can wait a month.
From the looks of it pulling the server out on the rails will disconnect the power cords. I would mount an extension socket next to it with an on/off switch that lights up.
I'd probably affix some of those velcro cable-ties or similar to the back of the box to clean up the dangling cables some more. You can then still open the ties to move your consoles and cables around, but there'll be no more risk of pulling on any cables by accident when carrying something past or so. Plus, bonus, it looks cleaner.
Amazon boxes and velcro cable ties.
Everything started out in one box and about once every 3 months it mitoses into new, smaller boxes.
Right now I have: USB cables. If it has a USB port on any end, it goes into the USB box.
Wall Warts: Everything gets labeled with a label maker the voltage and current so I don't have to read every single one
Video: DVI, VGA, HDMI, DP.
"Other:"
And then shelves. Shelves upon shelves.
Came here to recommend velcro cable ties as well. I bought this 100 pack from Amazon for $6.99. I have enough to last through Armageddon. Very handy.
Cable management to start.
You need to set yourself ample time and be in a focused mood to do it.
Basically, you sit down one Saturday (or other day off), and unplug EVERYTHING.
Line up all of the equipment the way you want to so it looks nice and neat, and then run the wiring. (optional but helpful: label the wires)
I use these a lot at work: https://smile.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ you can also buy one long roll of velcro so you can cut to size, I like that better at home.
To address the flipping over because of cables, you have to contort the cables. Bend them in the opposite direction they want to bend, not too hard but firm, and they'll end up wanting to stay straight.
Pro-tip: If you hang a group of cables over a hook and cable tie them together at the bottom, near the RJ-45 tips; leave them there for a week or so, you end up with really straight cables. (I got this trick from my former boss).
​
Edit: for me, if I had a wire rack I would make it look more pleasant by putting a wooden board, or even poster board on top of the metal wire so you couldn't see through it. That may just be a personal preference though.
Edit 2: Thank you kind internet stranger for the silver!
Anyone who wants to improve their cable management skills needs to get these fuckers. I don't know how I lived without them: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1376163559&sr=8-1&keywords=velcro+cable+ties
No more snipping 20 cable ties when I want to move something. They're just as strong as zipties but you can reuse them as many times as you want.
> Also velcro is quite expensive
It's really not.
First, use these: https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
​
Second: put like cables in ziplock bags. Either quart or gallon depending on how many you have. Then label those bags and put them in a box like you have been.
​
I have literally used hundred of those cable ties though. Use those for sure.
Post a follow up! I won't be able to sleep knowing this is out there!
Edit: Don't use zip ties, get Velcro ties.
amazon link
I just moved into a new place, so I've had the opportunity to upgrade a lot of my stuff.
Here's my list (sorted by value it provides to me)
Amazon to the rescue?
http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1
So when I originally moved in to my house last year, I set things up in a very temporary setup that became more permanent than I was hoping. I also had to bring another box home from my office when we moved locations and we no longer had a dedicated internet connection so I couldn't expose anything directly to the internet.
I've been looking at setups from everyone for a while now, getting ideas of what I needed and I finally settled on the following:
I don't intend on purchasing full sized rack mount servers as I just use desktop class hardware for the most part but I took the two systems that I had in desktop cases and put them in the Rosewill cases that I've seen a lot of people use and a coworker recently suggested them as well as he recent did a rack setup. Since I don't need full size servers, I decided to go with a 4 post "network" rack as I don't really need the extra depth. I'm just using a 1U blank to help stabilize the servers in the rack so they're not just hanging from the front.
If anyone is looking to get some of the same components, I would say that the 1U shelves that I bought don't really work that well as I had to get creative with the brackets to make them work and they do extend out the back a bit but I knew they would do that when I purchased them, I just didn't realize I would have to flip around some brackets to make it work.
My network is really basic so I went with a 24 port unmanaged gigabit switch. I did have to get some POE injectors for my 3 WAPs as I did have a 8 port switch that had built in POE before but I knew that 8 ports wasn't going to cut it and I wanted to go with a rack mount switch.
Future plans are to replace the 3 regular PSUs with something rack mountable. Right now I have one PSU for each box and then the 3rd is for all of the network equipment. I'd also like to get a KVM but for right now I have HDMI cables ran to the side where I can easily switch them out and the keyboard I only plug into the front panels if I need it.
Velcro cable wraps FTW
And for outside-the-box cable management I use Velco cable ties.
But you can get actual Velcro-brand cable ties for even cheaper...
This is the best $10 you will ever spend.
It's amazing how big a difference frames can make.
I assume that the reason you moved the tower to face that away is so that you can see the glass window? Totally get that. Moved my set up all around because I wanted to enjoy looking at it. But maybe you could move it to the same position you had in the first photos but maybe further to the left of your desk? Basically switching it with the PS4's location. I think that will help hide some of those cables and give the desk a cleaner look.
Or if you really have your heart set on that tower positioning, I think some velcro straps would be a great start and compressing the cables. Or something like these could help get cables off the floor and under the desk and help run them in a tidier fashion.
You've definitely been making some improvements! Keep up the great work!
Command Strips
These only cost me $4 at Walmart
Cable Ties
100 for $6
You are correct, the rack is from Ikea.
These are the fridge clips used for the headphone wires. I found that the adhesive strips they provided were too weak and kept falling off though. I purchased these, which are also cheaper at Walmart, and used them instead.
I guess it depends on what kind of velcro you can get. I have some cable tie velcro that is thinner than a zip tie (
obviously not real velcro). If rolling up the 6+ inch long tail is too bulky, the tie could be cut to a more appropriate length.I also have some fuzzy velcro ties that are maybe 2 zip ties or more thick. Those are best used on big bundles outside the PC case.
EDIT: I found a link. They actually are Velcro^TM wraps.
Velcro One Wrap and a cable tunnel will help you plenty. If you want to go a little overkill, a surge protector enclosure will help keep the electronics without a converter brick a little more organized. The former two things should do more than enough if you organize it well.
I actually use a combo of zip tie mounts, zip ties, and these velcro cable ties.
i put the zip tie into the mount, zip it down tight, and then feed the velcro tie through. secure, easy to use, and clean cables.
I'm not Op but I got you homey.
I see a few different products being used, especially on the underside of the desk. My links may not be the exact same products but they're functionally the same
1
2
And 3
> I don't want to zip tie everything down
Never zip tie cables down. Ever.
Use Velcro cable ties. They are much better.
Use a combination of velcro cable ties and adhesive backed cable raceway. You might be able to mount your modem and router to the wall and might be able to find shorter power and and cat 6e cables if needed.
Available at amazon as well, 100 for a little over $6. I typically use 2, one over each side of the battery.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1480944790&sr=8-3&keywords=velcro+strap
http://www.amazon.com/Plastic-Cable-Ties-100-Pack-Black/dp/B002C0SKBW
$1.99 and free shipping. Maybe $0.34 more than OP's pricing, but they're also charging several dollars to ship. You'd have to order some serious bulk to make up for OP's shipping costs.
http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6/
Velcro ties 100ct for $5.99 and free shipping if you have Prime.
These are just the first two products I searched for. You may find even better options.
Lowes.com also has 100ct ties for $5-10 range. If you want just one bag and your local Lowe's is on the way for your daily commute it still may be cheaper. One 100ct bag of the standard plastic ties will last you a long time even if you're constantly reorganizing, cutting and tossing them.
The standard cheapo plastic ones are even reusable if you push small (electronics size) flat blade in the back of the clasp, so a single 20ct bag could last you indefinitely.
Amen. Combined with these bad boys there is no cable mess you can't manage. Extra points for the Ikea swinging lamp. It has crushed my fingers many times, but it's been hella' faithful and durable through all these years and several moves.
The 100 pack of brand name Velcro ties for $5 is a far better deal.
Amazon has Velcro ties that are very useful for cable management and are like 5 bucks. cable ties
A switch and some cheap color coded cables! Made network setup a breeze.
Folding tables/chairs make setup and breakdown easy. Set up an extra for snacks/drinks.
Put a small cheap waste basket at each table to keep tables clean and clear.
Velcro Strips keep cables tidy at the lan or the battlestation as well as keeping them from tangling in your bag.
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_VxjVzbRB60QZV
Do yourself a favor and get these instead:
VELCRO Brand One Wrap Thin Ties | Strong & Reusable | Perfect for Fastening Wires & Organizing Cords | Black, 8 x 1/2-Inch | 100 Count https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_i_sXRUDbBV5ANWG
I wrap it around with one (or two!) of those mini velco straps. Earlier I used the joycon leg strap... which might sound counterproductive but basically I would use it while collecting points/watching tv (aka the game is turned off so I'm just doing reps with the ring-con) (if I'm playing the game, the rattle doesn't matter cause I'm already making too much noise with huffing, puffing, and stomping)
Anyway velcro seems like a cheap wrap-around, hope this helps! (let me know if you find something better/cheaper tho)
As a side note, my brother's joycons are really snug while mine are not... But mine have no visible wear/tear and I'm assuming some joycons are just like that. Maybe mine was made with less plastic on the rail part or something...
I like it. My homelab rack looks similar.
I just cringe when it comes to zip ties. Buy a couple packs of these for home and work use, imho
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
​
​
It will easily. These are the ones I use. Never had one come loose or break and I use them all around the house.
I bought these
velcro cable ties
Never, ever, EVER use tape to bind cords together, especially duct tape. Tape leaves a residue that is an absolute MAGNET for dust, dirt and grime. It's also hell to take off the cable later when you need to rearrange things.
Bread ties have metal wires in them that may not be the best choice for binding wires that carry current together. They also induce induction in the wire, which degrades signal strength.
For ease of use, nothing beats velcro. Pick up a roll of velcro for (under $4)[http://www.amazon.com/Cblwhl-Velcro-Cable-Tie-Roll/dp/B000I97FJ2] and then use it to bind cords together. Fast, reusable, and easy. You will have to use a pair of scissors to cut each one to length.
If you spend a touch more money (slightly over $4) you can get more colors than just black. Use this for color-coding your cables by type or by system in areas you have a TON of cables running through.
If you want to make it even easier, you can spend more (per cable) and get (these things)[http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6]. Now you won't have to use scissors, as they're pre-cut. Also, see the hole on the other end? Wrap this guy around one cable, and stick the end through the hole before snugging tight, then wrap the whole thing around your bundle. Now, when you unwrap the cables later, the velcro strip will stay attached to that single cable in the back.
Going off on a tangent, my solution to cable tangle misery is Velcro ties (like the ones that usually come on laptop chargers) :
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6
Keeps all of your cables neatly bundled when in your bag, and you can get coloured ones to make it easier to grab the right cable.
I bought this. 10 cents apiece (or less on sale) and I never have a tangled wire. Mine are all perfect. I also separate by USB/data, power, video, etc. I have a problem.
Upgrade: http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6. Zip ties are the worst.
I ended up putting my PC in the corner with the middle sensor and purchased 3 10ft USB 3.0 extensions and a 10ft HDMI extension.
If curious, here is what I got.
2x USB 3.0 extensions for 2 of the 3 sensors.
https://www.amazon.com/gp/product/B00NH12O5I/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
1x USB 3.0 extension for HMD
https://www.amazon.com/gp/css/order-history?ie=UTF8&ref_=nav_nav_orders_first&
1x HDMI extension for HMD (2 pack but I only used 1 of them)
https://www.amazon.com/gp/product/B00GBBSZFE/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
I used these every foot of the USB/HDMI cables for the HMD to bind them together.
https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
+1 on the velcro. These are what I use, I highly recommend them.
http://www.amazon.com/gp/aw/d/B001E1Y5O6
I've been using a sleeve for cables that does a great job preventing this. It won't stop it forever, but it takes way more to get it tight and tangled. I can usually go through a play session of several hours without it bunching up on itself, then I just untangle what little bit is there when I'm done. This is the sleeve, and I secure it to the cables with these. It works beautifully.
Mount a rack¹ or something to the back of your desk where it'll be out of sight. Buy some velcro cable ties² (zip ties are potentially a bad choice³). Route the cables to your liking and hold them in place with those cable ties.
It might be a good idea to search up 'cable management' and look at all the different options you can work with.⁴
¹ (http://m.ikea.com/us/en/catalog/products/art/30200253/) if you have enough room (http://www.amazon.com/gp/aw/d/B00006MJFL?cache=4724d4b63e5efee7bb792e11f53461a1&pi=AC_SX110_SY165_QL70&qid=1404394670&sr=8-5#)
² (http://www.amazon.com/gp/aw/d/B001E1Y5O6?pc_redir=1404305963&robot_redir=1)
³ Zip ties are a bad choice because if you need to undo the bundle you could accidentally cut into your cables and ruin your hardware
⁴ (http://www.amazon.com/gp/aw/d/B0019T0JA2?cache=4724d4b63e5efee7bb792e11f53461a1&pi=AC_SX110_SY165_QL70&qid=1404394772&sr=8-10#ref=mp_s_a_1_10)
(http://www.amazon.com/gp/aw/d/B004GUS4XK?cache=4724d4b63e5efee7bb792e11f53461a1&pi=AC_SX110_SY165_QL70&qid=1404394772&sr=8-4#ref=mp_s_a_1_4)
I bought my bag (Setout) specifically because you can take off the hip and sternum straps. For other straps and things that can hang off of my bag I will occasionally cinch them down using velcro ties. They are kind of like plastic zip ties but you can re-use them.
I just re-did all of the external cable management on my setup, and after cutting about 20 zip ties, decided that I needed a better solution. I found these, and they're glorious:
velcro-loops!
Nice set up!
I personally use Velcro to manage everything, both in personal and professional set ups I do. And a lot of them. Just clump everything together and Velcro them together. Prefer it over zip ties as they allow people to adjust things easier. Make use of the monitor stands if they have pass through for cables also.
https://www.amazon.com/gp/aw/d/B001E1Y5O6/ref=mp_s_a_1_4?ie=UTF8&qid=1500734274&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=cable+ties&dpPl=1&dpID=41sJ%2BD8YooL&ref=plSrch
Just undid five years worth of accumulated mess. Saw the beautiful workstations on this channel, and just couldn't take the cognitive dissonance anymore.
The before-and-after pics are available here: https://imgur.com/a/cjznWXZ
Installed a raceway and new power strips under the desk. The project took about four hours or so.
This channel had tons of great product and technique suggestions, and this YouTube video was also extremely helpful: https://youtu.be/Uc01oUqmxhE
Here's what I ended up using:
The next phase would probably be lighting, but I'm far less comfortable in that area. Thinking of a simple LED strip behind the desk using color that is keyed off the screen color. Any suggestions here?
Also, my mic arm clamp doesn't attach to the desk well because the desk has a lower drawer level that bumps into the base of the clamp. Looking for a mic arm clamp that is short--maybe 4-6 inches. I couldn't find easily on Amazon. Can anyone point me in the right direction?
All other suggestions welcome!
I like the velcro wraps because they're easy to use and reuse, cheap, and you can have cables enter and exit the cable run at any point. It does mean the cables aren't hidden exactly, but it keeps them together. I also use multiple ties to mount things to my desk legs, like power strips or power bricks.
https://smile.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I bought these and I love them! Unlike other things they're reusable and they don't require any nailing to the wall or anything. Here's what the underside of my desk looks like thanks to them.
I had ~10 racks with almost the exact same setup (same racks, same servers, very similar cable layout and switch position).
My advice to you is to tie the cables off in such a way that they are not touching the rack rails. Those hooks you see on the left side of the photo on the rack rails? They move with the server and love to catch the ethernet cables. Similar situation happens on the side with the power cables, although not as bad due to different cable management attachment point on the other side.
You will say to yourself, but sir, I will always be sure to power the server off and then disconnect all cables before removing it from the rack! - likely very true statement. However, no one else will give 2 shits about it and will do the old "I'll just pull this server out a half inch so I can go around back and tell which one it is" trick, which then pulls your ethernet cables into the pinch-n-cut hook, and the power cables pull out. Then your life gets worse :)
I suggest getting some of the really thin Velcro cable wraps like these - http://amzn.com/B001E1Y5O6?tag=amz-link-20 - then apply them liberally to keep stuff tied back and out of the way. They are really thin and don't get in the way like the thicker expensive ones do so they work great for actually tying the cables directly to the sliding section of the rack rails.
If it's going to be hidden away and you're ok with adhesive on that part of the cabinet, then one option is zip tie anchors. Beyond that, there are Nail-In options and cable clips. Amazon is your friend!
Cable management
Zip ties
Tie down
headphone puck
Maybe an Ikea cabinet to go under the desk, you can take two legs off and prop the desk on two legs on one side and the cabinet on the other, that will help with moving things off your desk (electrical tape, Xbox game, controller)
If you do this often (and I do), you need a cable tie gun. It will pull the tie much tighter than you can get by hand and then neatly cut it for you. You can get them for free in large packs of zip ties sometimes.
They make reusable ones. I use them around my house. Here's a link to some.
FLOORING BASE: 2 layers
LAYER ONE: TARP
i do the same with a tarp on the floor, but i fold the tarp about a foot up the ex-pen walls to contain dust, fur, etc...inside the pen. you can cut and fold the tarp as necessary to make sure the floor is covered. i use either zip-ties or clips to secure the sides of the tarp.
https://www.amazon.com/gp/product/B000RMO85E/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
LAYER TWO: CARPET TILES
i have two pairs of bonded bunnies and one pair will aggressively chew, dig and claw their way through almost EVERYTHING i give them, but i've had pretty good success with FLOR tiles. the backing is a tough rubber with a soft low pile carpet on top that they can't dig through. they will nip at the corners but stop once they find it's too tough to chew.
if you shop at the FLOR online outlet, you can get 20in x 20in tiles for $3 each ($1/tile plus $2/shipping each tile).
https://www.flor.com/carpet-tiles/outlet/random-pattern-tile
i didn't really care what colors or patterns they sent so i took a chance and the selection they sent were actually not too bad (browns and blues).
hope that helps:)
>The basic question I really have is what do I do to effective get the cables to the server rack
Run them directly to the rack, leave a "working loop" of extra cable on them so that you have room to work on them or repunch them.
>once at the rack is there special type of setup I should do?
run everything to a patch panel. I prefer a keystone based system because it supports way more than just ethernet. A 48 port keystone patch panel fits in a 2U space, then you can fill it with everything you will need to keep flex and damage to a minimum from the cables running in. This includes HDMI keystones, RG6 keystones, USB3 keystones, and finally cat6a keystones.
Once you have everything run to the rack, you just need short patch cables for everything then, instead of trying to have to work each cable and risk breaking the ends. For ethernet, then you can get 12in or 6in patch cables for your ethernet runs to a 24 or 48 port rackmount switch. This is what my rack looked like last week, I have since added 4 more ethernet runs(from one spot). I have a shelf in there for the modem and Samknows whitebox(no, that is not my router). My PFsense router is just below the server you do see. All the runs from my house come to the rack, and it is all neatly bundled up in back of the rack, and has enough slack in the lines that I can take the patch panel out and work on it should I need to move things around or add more runs. Don't staple your runs down hard, and bundle everything together in the back with velcro cable ties so that should you need to undo anything, you can. Don't use zip ties for that, it makes it a giant PITA later.
I used a combination of adhesive cable clips and Velcro cable ties.
These clips:
https://www.amazon.com/dp/B01M6U9Q9C/ref=cm_sw_r_cp_apa_a70RBbHVRAPPC
And these ties:
https://www.amazon.com/dp/B0154MS9Q0/ref=cm_sw_r_cp_apa_p80RBbGMJW2Z7
Leave a little space between your desk and the wall and either get a cable tray or check and see if your surge protector has slots on the bottom that you can use to hang it off screws.
Braided sleeving and velco strips will work wonders, or use a combination of the two depending on how much you have to deal with. It's on you to hide all of it behind your monitor stand for minimal appearance, but with a little work it'll look great!
Not sure what your board looks like but I always try to route all cabling underneath where possible.
Once underneath I use a few different types of organizers to avoid a web of cables.
I use velcro zip ties (like this: https://www.amazon.com/Pasow-Reusable-Fastening-Organizer-7-Inch/dp/B0154MS9Q0/ref=sr_1_5?ie=UTF8&qid=1503940004&sr=8-5&keywords=cable+organizer)
I also use these things: https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=sr_1_10?ie=UTF8&qid=1503940004&sr=8-10&keywords=cable+organizer
Look at moving it out from the wall just a tad and try something like this to mount them to the back of the cabinet. Rotate your power strip so it's flush with the cabinet and then tada, if you see any cable at all it's only the power strip to the wall.
Rustark 50Pcs 2 Sizes Adjustable Self-Adhesive Nylon Cable Straps Cable Ties Cord Clamp for wire management, Large and Small https://www.amazon.com/dp/B071RGCJLT/ref=cm_sw_r_cp_apa_i_CqyCCb0JKZSJS
Adhesive cable clips (www.amazon.com/dp/B075Y9J42T/ref=cm_sw_r_cp_api_i_9QR0DbQ1P7ZRS)
These will be your best friend!
don't need to staple if you buy these bad boys.
https://www.amazon.com/gp/product/B075Y9J42T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Also easy to detach because its just sticky tape :)
Here is my setup with like 50 cable clips underneath the desk XD
Get yourself some of [these things](http://www.amazon.com/Startech- HC102-Adhesive-Cable-Mounts/dp/B00008VFBE). They hold down zip/twist ties.
Get behind/under your desk and plan and think for about an hour before actually doing any routing so you don't have any goof ups. The important thing to remember is that the cables don't have to go directly to the destination, unless it's a very short cord, so create a few common paths rather than many individual ones. I used to have a bundle of wires where my feet rest, and I did this a few weeks ago and it's been worth every penny and every second.
If you want a solution that is repeatable and nice looking, maybe do some of these w/ some zip ties? That way, you can just cut the zip ties when done, and leave the mounts on the boards for next year.
Edit: These are the same thing, but more cost effective and have the prime/free shipping option.
http://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE/ref=sr_1_1?ie=UTF8&qid=1408638506&sr=8-1&keywords=zip+tie+sticky
A fair amount of zip ties, indeed. I feel like there are a billion in my PC, as I used them with things like this for ultimate cable management potential.
I use zip ties and anchors like these ones to hold everything in place. It's a massive pain if even the slightest thing needs to change underneath, but gets the job done extremely well.
Thanks! The cables are secured with tie wraps and tie wrap mounts very similar to these ones. I bought a bag of them a while back to try to clean up the cabling around my house and they still seem to come in handy now and then.
Something like this or use 3m on the back of the desk to raise wires...also..zippptiiesss
Sounds like the tubing on the whip may have been stretched a little too much or too often. You might want to try cutting maybe two inches off of it... alternatively you could try using the smallest size zip ties to 'clamp' the rubber to the glass... youll obviously want to be careful that you do not break the glass.
The last idea I would suggest you try is to take a rubber band and try to hold it down with the rubber band by looping it over and over and over the last little end bit where the tubing and the glass meet.
I think I like this idea too. They make self adhesive plastic tabs that are slotted to accept a zip tie running through them, I think that may be a good way to go. Like these little chingaderos
They look like they're attached with something like these and zip ties : https://www.amazon.com/Ziotek-Zip-Tie-Mount-Pack/dp/B000BSJHLE
Zip tie mount.
I recently installed the same thing. Instead of allowing the cable to slide freely through the hoops, you want to tie down the cables to the hoops with some appropriate amount of slack. That way when you bend down, the leashes will extend, instead of the cable sliding through.
Pick up some velcro cable ties (zip ties seem too permanent). Then you can adjust the slack to what you want and it won't change. I used something like this:https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Multi-color/dp/B00144CABS/ref=sr_1_5?s=office-products&ie=UTF8&qid=1522950872&sr=1-5&keywords=velcro+cable+ties
You will want some slack between the leashes also, so you don't end up extending all the leashes at the same time. As long as the slack is short enough that the dangling cables are still over your head, you should be fine. I can pretty much cover my entire space with just two of the leashes extended.
It's a bit of work, but not having to move your cable every time your turn around, will significantly improve your immersion.
Interesting. Is there another use for them?
Meanwhile in IT land we use these. And they're removable so you can hang things up to dry while in camp.
Interesting. My occipital bone doesn't really protude enough for it to catch on the back part of the strap. No matter how low I put it I am constantly adjusting the Rift (I've tried multiple variations of looseness/tightness on the straps).
Using four pieces of this and a piece of pvc I had laying around that came in at 230g (same as in that ebay listing) I now have it similarly on the back of the rift. First impressions just having it on and moving my head around it does seem to do the trick. It does feel weird with that pvc on the back of my neck though. I'll have to play around with this some more and see how it goes. I'd say see if you can cobble up something similar first.
>...wasting duck tape and putting it around my flashlight to act as a improvised shoulder mount.
Dude? Have you not seen these straps and ties and/or the Horror Fraught equivalent?
But also, get a freaking headlamp.
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_sms_apa_i_sPJ4AbT1SVS3B
I don't know if it is worth it to you to buy a big keyboard case but this is what I do. I have a very large keyboard case that I have my gear set up in. All the connections are set up and the wires are held down with velcro. I only have to hook up one piece of gear and I have all the cables labeled very clearly so any gear savy person could set my gear up for me. Live setup requires zero thinking. I can have everything set up and ready in less than five min. All I need is power and two lines out to the house.
If you can't go the giant coffin setup route then go with OCD labeling of all the things. To be rock solid fail proof have 2 of every cable you need. Both ends of every cable should be labeled as to what they plug into with a matching label on the device that the cable gets plugged into. Just match up the labels. Also have your power supply sorted before hand. Get a really nice power strip and secure all of your wall warts to it with tape or velcro straps. Label and wrap each power cable coming off of it so you can quickly identify what everything plugs into. Color coded tape is great for this but that might be overkill. I just use a label printer.
Then practice setting up your gear a few times. Tear your setup down and put everything out in a hallway. Turn all the lights off in your room and set up all your gear with just a flashlight in your teeth. Anything that confuses you for even a second needs to be streamlined, labeled better or made easier in whatever way necessary. Basically you need to be able to set up your gear in the dark while you are drunk and high. It takes a little prep work but it makes things so easy once you get up on stage.
Edit: These velcro straps are the best thing ever.
I know you are looking to fix your cables but for future reference, I use these throughout my systems and they are great since you never have to worry about taking sharp objects near cables.
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1466388086&sr=8-3&keywords=velcro+ties
buy it all the time, I always keep a roll in my bag clearly I need to re-up
group the cables logically by destination (i.e. monitor cable, keyboard, mouse cable all go the the PC) and use velcro ties to secure them. Gather power cords that can plug into the same power strip. Again, use velcro ties to secure them together. Wind up any excess slack (again velcro ties)
You want velcro ties
I also refuse to pay a premium for velcro straps and got tired of dealing with zip ties (although they do look better).
I've been using these for the past 5+ years and love them. Home Depot carries a two pack (grey and black) for around $6 for 100. Amazon carries just the black in a two pack for around the same price.
I go through at least a role a week and since I have cable OCD I don't like to see the ends where you would typically use it to always remain attached. I usually cut the ends off and cut it in half leaving about 4" lengths. I also like this particular one because it's pretty thin compared to most I've seen.
Velcro Reusable Self-Gripping Cable Ties, 0.5 Inches x 8 Inches Long, Black, 100 Ties per Pack (91140)http://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
These
Twist ties and zip ties are garbage and seem to be the bane of /r/cableporn. What you really want is velcro ties. They're reusable, durable, a lot faster to use, and not that that expensive.
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6
Those cable ties always look a ton better than zip ties and are a million limes easier to remove. Even though you say its permanent, nothing is ever PERMANENT.
Velcro cable wraps - Check your local Lowes/Home Depot/Walmart/Whatever, they may have the two packs for the same price as one roll from Amazon. I've lost entire rolls, and it's still worth the price. I'm sure I'll find the lost rolls eventually, of course. >.>
Rackmount PDU to replace the power strip you have on the floor.
Real rackmount gear to replace the home stuff you have stacked on top of other devices. ;)
These things will save your relationship. You won't believe how much some people will try to charge you for a velcro cable ties. Caveat emptor: Velcro is a cat-fur magnet.
I could see something like that being useful for one or two cords that you use really frequently, but they're too expensive for something like cleaning up your tangled pile of 20-30 random cables. For cable storage, something like this is ideal. 100 reusable Velcro cable ties for $6.50.
Also, before trying out those cable ties, I hadn't realized there was a difference between Velcro (the brand) and velcro (generic). I was quite pleasantly surprised.
http://smile.amazon.com/dp/B001E1Y5O6
100 for less than $7
Check these out, they are great! https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1522880725&sr=8-3&keywords=velcro+cable+ties
+1 for gaffa tape and a sharpie, and to pass on another tip that I got from this forum, I'd recommend the Velcro cable ties. Used them myself and they really tidied up my desk. These ones look like the ones I got - https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
If you havent already, these are the greatest thing for cable management and cheap!
https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_i_1IqDDbW778NJM
I use copious numbers of these https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_2?ie=UTF8&qid=1495494005&sr=8-2&keywords=velcro+cable+tie
They are thin enough that they don't get in the way much, but provide a nice way to tidy up cables easily.
I use these velcro cable ties to organize some cables on my board, a little less permanent if you're like me and are still changing things around somewhat frequently.
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/
These last forever for $10. You can cut them shorter for small bunches of cables or keep them long, but they are great for keeping tiny bunches in line and reusable when you make changes. I've found the easiest way to add cables is to use a new zip tie next to the old then remove the old and go down the line.
(EDIT: Also, it looks great.)
Or buy 100 of these for $6
Basically what /u/cstoner said. If you absolutely can't take downtime then setting up redundant paths are the only way.
Our blade chassis have ethernet fiber, storage fiber, a few copper connections, and power. They're all redundant. Being able to fix that mess while being careful isn't too hard as long as you only ever have one thing unplugged at a time. Messy power cables? Unplug one, reroute it, plug it back in, wait a few seconds, move to the next one.
For actual cable management tips, I would strongly recommend something like THIS. They're velcro cable ties that function pretty much like reusable zip ties. You can pull them pretty tight.
I would also recommend /r/cableporn .
That's what I was thinking of -- velcro cable ties, like these.
since no one is giving suggestions on how to cable manage, ill help out.
use velcro straps to help run the cables along the posts going up the desk and entertainment center
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ref=sr_1_8?crid=2CELM9CIVWUT3&keywords=velcro+straps&qid=1557866180&s=gateway&sprefix=velvro+str%2Caps%2C429&sr=8-8
​
use cable boxes for hiding power strips and excess cables
https://www.amazon.com/Management-Organizer-Storage-Holder-Computer/dp/B07PP113P2/ref=sr_1_12?keywords=cable+management+box&qid=1557866240&s=gateway&sr=8-12
​
if you dont want to use the boxes and have them sit on the floor, you could mount the power strip under your desk using 3m adhesive tape.
https://www.amazon.com/3M-VHB-5952-Automotive-Industrial/dp/B00MAQBPEM/ref=sr_1_5?keywords=3m+adhesive+tape&qid=1557866532&s=gateway&sr=8-5
​
use these raceways for routing cables up walls, and for the power strip cables that need to go from the wall plug to the power strip
https://www.amazon.com/Cable-Concealer-Wall-Cover-Raceway/dp/B01JKO8724/ref=sr_1_1_sspa?crid=1VQ606JNF5W8J&keywords=cable+routing+sleeve&qid=1557866311&s=gateway&sprefix=cable+routin%2Caps%2C189&sr=8-1-spons&psc=1
​
and use these raceways to run the cables under the desk to your peripherals. cut them as needed to fit, or just make sure to leave gaps for the cables to leave the raceway and not sag
https://www.amazon.com/Channel-Cable-Raceway-Management-Organizer/dp/B07B7KZ6QT/ref=sxin_3_ac_d_pm?crid=54G3BYAXU7AX&keywords=cable+raceway&pd_rd_i=B07B7KZ6QT&pd_rd_r=f21b5fae-9634-46fd-bd83-8c57b0d1a260&pd_rd_w=XEKi3&pd_rd_wg=EqTrq&pf_rd_p=5cc8abfe-8f78-4f34-b19f-d09d6ea0dca4&pf_rd_r=7K5F6REG3RC66ENZ8QG6&qid=1557866693&s=gateway&sprefix=cable+race%2Caps%2C192
Here is a brief step by step on how to somewhat tame this birds nest of spaghetti.
Some other things I would say is, put your UPS outside of the entertainment center, those things take up a ton of space and are heavy. If you ever need to unplug something or change the battery it will be very inconvenient. I would place it right next to the entertainment center or behind it. Also consider using double sided 3M foam tape to mount your switch upside down underneath a shelf, that way it frees up some space. Aside from that, theres not much else that I can see being done. I hope this helps. You are contractually obligated by reddit to post the before and after if you decide to tackle this. (not really, but I would love to see the results!)
Rockin set up my man, but do yourself a favor and grab some of these bad boys and tiddy up those cables for maximum style.
Couldn't find the post from awhile back but they essentially used clips like in the link below to attach to the monitor. 2 of them stacked vertically and then I can't remember if they put some sort of an extension on the shaft of the sensor or if they had enough length on it to then zip tie it down to the clips.
https://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE/ref=sr_1_1?ie=UTF8&qid=1483998355&sr=8-1&keywords=sticky+zip+tie+clips
They are just regular cable ties. You get a pack of tie mounts like these http://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE/ref=lp_507844_1_9?s=electronics&ie=UTF8&qid=1396873899&sr=1-9 and you place a zip tie through it and around what you want to mount.
http://www.ikea.com/us/en/catalog/products/30200253/
Or if it's too big for your desk, ziptie holders holders like https://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE, here they sell whole packs (20-100) of those for cheap in every home improvement/DYI shops. Don't tighten zipties, leave enough room to pull cables through.
Or self-adhesive velcro straps under the desk, then tighten cables with opposing velcro tie and stick it there.
You can find these guys at any hardware store.
Dude.
These and zip ties.
Oh. Here's the link though if you need it.
Cat5e should be sufficient for any house. Really. You can get gigabit speeds on that, which is good for 20 simultaneous 4K video streams, plus another dozen or so netflix HD streams. Really, GigE is fine.
Source: http://blogs.iis.net/alexzam/archive/2013/01/28/h-265-hevc-ratification-and-4k-video-streaming.aspx
The only time I'd recommend cat6a is if you, right now, have a home application which routinely requires greater than 500 Mbit/s. The extra cost for cat6a isn't worth it, and the cost of 10G components is still quite high (for the home)
Wire cat5e from each place you might want a phone, TV or media device. My living room has 4 cat5e drops (TV, blu-ray, xbox, Roku) back to your panel box area.
Secure them to the joists in the ceiling with J-hooks, not staples, please.
http://store.cablesplususa.com/jhook225pk.html?utm_source=googlepepla&utm_medium=adwords&id=20005783933&utm_content=pla&gclid=CMvZ5vG4nLoCFQSf4AodMRsAiA
If you're feeling cheap, get some anchors and small zip ties. Screw the anchors to the joists, peel and stuck will come loose.
http://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE/ref=pd_sim_e_4
At the walls, use keystone jacks and wall plates
http://www.monoprice.com/Product?c_id=105&cp_id=10517&cs_id=1051703&p_id=6734&seq=1&format=2
Don't forget the low voltage box
http://www.monoprice.com/Product?seq=1&format=2&p_id=7016&CAWELAID=1329454251&catargetid=320013720000010679&cadevice=c&cagpspn=pla&gclid=CLuwocO8nLoCFYWe4AodtF4AmQ
and use a proper patch panel in the basement
http://www.monoprice.com/Product?c_id=105&cp_id=10514&cs_id=1051402&p_id=7255&seq=1&format=2
Don't save the labeling for last, you won't remember. Label things as you go.
I have a brother labeler, which works really well.
http://www.brother-usa.com/Labeling_Solutions/ModelDetail/7/PT18R/Overview#.Ul8cOFBwqsM
I stress the cat5e thing as being good enough because people very often think that they need cat6a or somehow their 15Mb/s turbo internet package will be bottlenecked. The only project I've ever worked on where cat6a made sense was for a public works project in NYC, where the labor rate was $105/hour. For them, it made sense to buy the best cable money could buy.
You can go a number of ways with the Twist/Cable ties. Twist ties seem to imply those bendable wire ties, which I'm not too fond of since they can become undone.
There are these trusty zip ties, which are strong and handy if your case comes with holes to thread the ties through. You can also cut the excess tie for a more appealing appearance (not so with twist ties).
I also like velcro ties for bigger cables and also for cable management outside your tower (mice and keyboard cords, power cables, speaker cables, etc). They're reusable, and it's easy to add cables to a bundle without having to undo the entire existing bundle.
If you're getting an SSD, you also might want to get a 2.5" SSD tray if your case doesn't come with one.
As for tools, precision screwdrivers are handy for small screws and for reaching deep into the case. An alternative to magnetic tip screwdrivers are long nosed pliers.
Can you post an album of your setup and maybe under/around your desk? I put a lot of stuff under the desk that I dont nessicarly need to see all the time (USB hub, External hard drive)
Some general things that will help are Velcro Ties or for more permanant situations cable ties.
Also depending on the size or weight of your USB hub some mounting tape may help to keep it in place on your desk.
Here, you could probably use these. Especially with a baby around that's going to start crawling around and grabbing hold of everything.
I found them quite uncomfortable as it put a lot of pressure on the center of my head, but I did a cheap/simple mod - I bought a replacement Sennheiser headband for $7 and some thin Velcro straps. It spreads the weight out evenly and made it very comfortable! All for ~$10.
I love the sound of the NAD... I think you really hear guitar growl like it's coming from an amp.
Headband -
https://www.amazon.com/Replacement-Headband-Cushion-Sennheiser-Headphones/dp/B01H8Q05O4/ref=mp_s_a_1_7?keywords=sennheiser+headband&qid=1570099657&s=gateway&sr=8-7
Velcro straps thin enough to fit between the pads -
https://www.amazon.com/gp/aw/d/B0006BB9MG/ref=ya_aw_od_pi?ie=UTF8&psc=1
Or this...
https://www.amazon.com/gp/aw/d/B0006BB9MG/ref=oh_aui_i_sh_in_o1_img?ie=UTF8&psc=1&th=1
It's way more easier and has more uses.
https://www.amazon.com.au/gp/aw/d/B0006BB9MG/ref=mp_s_a_1_1?ie=UTF8&qid=1527077997&sr=8-1&pi=AC_SX118_SY170_QL70&keywords=Velcro+cable+ties&dpPl=1&dpID=31wi%2BMKVHEL&ref=plSrch
Use something like this:
https://www.amazon.com/Zip-Tie-Mount-25-Pack/dp/B000BSJHLE
to attach these: https://www.amazon.com/Nippon-Labs-CT-4MINI-BK-Cable-Pieces/dp/B008TVFHXC/ref=sr_1_4?s=electronics&ie=UTF8&qid=1486365120&sr=1-4&refinements=p_n_feature_keywords_two_browse-bin%3A7065319011
Use a special tool to install them so you do not leave sharp edges. Improperly installed will scratch at a minimum you and can draw blood:
https://www.amazon.com/Cable-Tie-Gun-Installation-Tool/dp/B00B52NYNM/ref=sr_1_1?s=mobile-apps&ie=UTF8&qid=1486365283&sr=8-1&keywords=zip+tie+gun
You can use this document as a guideline on how to do the cabling.
https://www.hq.nasa.gov/office/codeq/doctree/NSTD87394A.pdf
I would try to run all cables that I could on the scope itself. I would also pay attention to adding extra length of wires across parts that move, twist, rotate.
I would definitely try to route the cables in a bundle together as much as possible.
Just to piggyback on the discussion of cable management, these are a very handy item to have in the toolkit. I use them often, including inside pc cases.
https://www.amazon.com/Ziotek-Zip-Tie-Mount-Pack/dp/B000BSJHLE
These things are also super useful if your case isn't designed with zip-tie points. You don't have to get them from Amazon, I found them at my local Menards, it's a couple bucks for 100 of 'em.
I tend to bundle my cords with VELCRO ties then use U-Nails on the unit so I can run the VELCRO through the u nail and keep things from getting loose.
I put one of these around the end of all the cords right next to the male plugs and then just wrap them up for storage when I'm done. Seems to work great.
Here are many different styles. Some are literally 3 dollars.
Velcro ties are a amazing at keeping cables neat.
Not sure about cable management in the case for but the desk...
I believe thats a malm desk so it has the rack in the back which means adding another won't be easy (really everything doesn't fit?). You could try using something like this or this with some 3m tape so you can mount the cables on the bottom of the desk so they aren't hanging. You could also wrap the cables to decrease the amount of slack using something like this. Any cables coming from the back of the monitors or the desk you can try using this. You could consider mounting your surge protector on the desk if it is not already so that no cables are dangling down to it and the only thing would be the surge protector wire.
Additional things you could look into would be a boom arm for the mic so its not sitting in the middle, might clean it up a bit. Also, if you are really dedicated to making it look nice and don't tend to rearrange that often, you could look into drilling holes for the wires for the keyboard/mouse (I'm personally not a fan of this method but people do it).
It might take a bit of cash to do ALL of that so maybe just prioritize what you think will give the best results.
Actual ideas:
VelcroHook and loop cable ties. 100 eight inch ties for under $8. If you need them to be longer, you can loop two together for extra length.My personal opinion is to keep and organize since they don't take up too much space. Having no shortage of a relevant cable is something I value too much to get rid of them.
This purchase is a game changer for cleaning up cable clutter.
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6?ref=yo_pop_ma_swf
if you think that's long, wait till you get a Q701 :-)
best way: cut to length and solder a new connector. Even a good Neutrik connector costs only a few dollars. Soldering isnt difficult, igf you have never soldered before might as well start somewhere.
The non-DIY way: braid it
The option for the lazy braider: coil it and use something like [this] (http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6) to keep things in place
Something like this can go a long way. And they're reusable.
For what it's worth this item is available as an Amazon Add-on item for the same price.
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/
Not $5 but pretty damn close https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6
I use Velcro cable ties and the amenity kit bags you get on international flights. Ziplock bags would work also. Coil around your hand, Velcro, and toss it in the bag.
You can have a killer setup for under $500.
Mic: Audio Technica AT2005 - A great mic that a lot of let's players use (draax, zueljin, kingdaddydmac, etc.). It also accepts xlr or usb inputs (more on that at the end). I use the atr2100, which is the same mic, just different color and warranty. The at2005 is cheaper by about $25 right now, so buying today, that's the one I'd get. It's a dynamic mic, so it blocks out sound that's not in front of it. Much better for noisy environments. Condenser mics like the blue yeti will pick up a lot more background noise. Other mics I've used are the V-Moda Boompro, which works with most headphones that have detachable cables (in my case the M100s) and sounds good, but changing the cable for when I didn't want to use the mic became old pretty fast. You can leave it attached, but then the boom mic is there all the time. I've also used the antlion modmic 4.0 and can't recommend it. It has white noise unless you use a usb soundcard, the cable is stiff and it's kind of expensive compared to full fledged mics. $56
Stand: Pyle PMKSH01 Suspension Boom Scissor Microphone Stand - A decent cheap stand. Nothing special, but it comes with an integrated xlr cable. I use this one, but may upgrade to the Rode PSA1 ($100) later on. The shock mount will not fit the at2005 however. $21
Shock Mount: On-Stage MY420 - A great shock mount that fits the at2005/atr2100. Shock mounts reduce noises from bumping your desk or tapping on your keyboard; things that may reverberate to your mic. It might not even be necessary if you're not a heavy handed gamer or if your desk is made of a thick, dense material. $25
Wind Filter: On-Stage Foam Ball Windscreen - Reduces wind/breathing noises as well as minimizing plosives. Not a complete necessity, but extremely cheap and it does help, so why not? $3
Cable management: Velcro One-Wrap Cable Wraps - I use these for keeping the usb cable for the mic attached to the stand. Extremely useful and cheap. $6
Headphones: Very subjective to user preference. I prefer closed vs open for noise isolation. Here's what I've used:
Audio Technica ATH M50: Good (not great) headphones for ~$100. Considered the standard by many, but to me they're just good. $155
V-Moda M100: Excellent sound with very potent bass. They make the M50s sound muddy in comparison. HOWEVER, the M100s have a design flaw where the "wings" (the parts above where you adjust the headphones) will crack over time. It happened to two pairs of my M100s. Unacceptable for the price of these headphones, regardless of how good they sound. $222
Beyerdynamic DT770 Pro 80 Ohm: Amazing. Potent bass like the M100s, but even a bit clearer. Very wide soundstage for closed headphones. I paid $219 for mine and don't regret it a single bit. I might grab another pair at the price they're currently at. $150
All that adds up to around $261 + tax choosing the DT770s, and will be a killer setup for gaming. Far better than any "gaming" headset, and it even opens the option of streaming or let's play videos (the reason I got my setup). There is one more thing I'd add though, given the budget if you're serious about mic quality, and that's the $99 Focusrite Scarlett Solo 2nd Gen. It's a usb audio interface that accepts xlr mics. It gives you a bit more control over the audio coming out of your mic and cleans up the signal so you get less "noise" from the usb interface. Quality is good without it, but with it, it's noticeably better.
Hope this helps some! I spent quite a while researching things when I put my own setup together. :)
Some velcro cable ties work well and usually look very discrete. Like you said, maybe a nice, smaller screwdriver and a small LED flashlight for more light?
Any Velcro will do but this is the one I got. The length fits this lock diameter perfectly so it takes a second or two to strap each one down each time.
VELCRO Brand ONE WRAP Thin Ties | Strong & Reusable | Perfect for Fastening Wires & Organizing Cords | Black, 8 x 1/2-Inch | 100 Count https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_i_hypvDb7RAC3YA
Got 100 on amazon for like 12$
VELCRO Brand ONE WRAP Thin Ties | Strong & Reusable | Perfect for Fastening Wires & Organizing Cords | Black, 8 x 1/2-Inch | 100 Count https://www.amazon.ca/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_i_85atDbRAKBAQZ
Great build!
Every single one of those parts are balanced and well priced. You could downgrade the PSU to the 550 Rosewill Hive and save a few dollars, but that is not necessary if you don't wish to. As for cable ties, I suggest some 4" black zip ties, a good pair of scissors, and these velcro cable wraps for both the interior and exterior cables: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_2?ie=UTF8&qid=1394638134&sr=8-2&keywords=velcro+cable+tie
this is what you want
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1510165437&sr=8-3&keywords=velcro+straps
Carefully planning on where they are going to be routed, and minimizing cables needed is basically it. I recommend swapping to an M.2 SSD, since it mounts directly on the motherboard and does not require SATA data/power cables:
PCPartPicker part list / Price breakdown by merchant
Type|Item|Price
:----|:----|:----
CPU | Intel - Core i5-8600K 3.6GHz 6-Core Processor | $279.89 @ B&H
CPU Cooler | Noctua - NH-L9x65 33.8 CFM CPU Cooler | $49.95 @ Amazon
Motherboard | Asus - ROG Strix Z370-I Gaming Mini ITX LGA1151 Motherboard | $184.39 @ OutletPC
Memory | G.Skill - Ripjaws V Series 16GB (2 x 8GB) DDR4-3200 Memory | $189.50 @ Amazon
Storage | Crucial - MX300 525GB M.2-2280 Solid State Drive | $149.88 @ OutletPC
Video Card | Asus - GeForce GTX 1080 8GB TURBO Video Card | $499.99 @ Amazon
Case | Silverstone - RVZ03B Mini ITX Desktop Case | $104.99 @ Amazon
Power Supply | EVGA - SuperNOVA G3 550W 80+ Gold Certified Fully-Modular ATX Power Supply | $58.98 @ Newegg
| Prices include shipping, taxes, rebates, and discounts |
| Total (before mail-in rebates) | $1542.57
| Mail-in rebates | -$25.00
| Total | $1517.57
| Generated by PCPartPicker 2017-11-20 11:07 EST-0500 |
It's (oddly--usually SATA M.2 vs 2.5" is about the same price) slightly more expensive.
I'd also suggest not using regular zip ties as they can be quite a pain to remove/modify later if needed. Velcro Ties do just as good of a job and can be easily removed:
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
Here you go mate. 100 of the suckers for just a hair over $10.
Looks good, but some cable management would make it look even better. Pick up some cable wrap and some velcro then go to town!
These velcro zip-ties may change your life
Perfect for cable organization. You'll never go back to normal zip-ties.
Well, you going to need a lot of patience and zip ties. Here is how I did mine:
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6
http://www.amazon.com/Management-Adjustable-Organizer-Flexible-Baltic/dp/B018K8UGKM
Put the second monitor on a lazy Susan on the edge of his desk so he can rotate the screen and watch Netflix in bed on his computer. Should only cost $2 and vastly increases quality of life :D
Other things:
-- Ties for wire management - https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_awd_jqgbub0823QYK
-- Rotating Power strip and duct tape to tape that shit to the underside of the desk (beer will be spilled at some point) - https://www.amazon.com/dp/B000JEACFK/ref=cm_sw_r_awd_Xxgbub0E3RY3J
-- Computer lock and cable to stop pesky thieves
-- LEDs that are daisy-chained and can be plugged into a USB
-- A USB hub for all his gadgets
-- Wireless bluetooth speaker (many uses outside of his normal computing)
-- Microsoft ergonomic keyboard 4000 - most comfortable keyboard ever - https://www.amazon.com/dp/B004SUIM4E/ref=cm_sw_r_awd_Nygbub1ZK53VH
-- Bluetooth touch mouse - https://www.amazon.com/dp/B0093H4VBU/ref=cm_sw_r_awd_9wgbub1542WT5
-- Exercise ball chair (also, with that weight limit... Lots of fun can be had doing.. Activities.. Of all sorts... Ahem..) - https://www.amazon.com/dp/B00DG9KIE0/ref=cm_sw_r_awd_wrgbub07AKZHX
-- Some sweet headphones - https://www.amazon.com/dp/B008XEYT48/ref=cm_sw_r_awd_Gugbub07RHAXS
-- A handheld wireless keyboard/mouse (not what you think, this is badass. I have one. He can use it for presentations and stuff too) - https://www.amazon.com/dp/B003UE52ME/ref=cm_sw_r_awd_Kvgbub004D1EF
-- Go to a pawn shop and get a third computer monitor (make sure his gfx card can handle it)
-- USB can cooler or 'hot plate' that keeps either your can of beer cool or your coffee warm
Anything with a link I own and definitely recommend.
Nice! These are the best for cleaning up cable mess: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6
Don't see why not. I use them in my computer. I bought this and it's more than enough. Plus you don't have to cut them if you change your mind. https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_cnSyxbG7EW431
Start by mounting your surge protector under your desk. Then gon on Amazon and search for "cable management". There are a bunch of different products you can use. I like the velcro ties. They are reusable, strong , and easy to swap out cables if needed. Zipties, double sided mounting tape, and those little plastic clips work well too. I see a lot of people use those ikea organizers, but to me, they just create a rats nest that is less visible. I prefer to have my cables managed and organized. I saw one post on Reddit where they used a gutter to hide all their cables. If you own, you could always run cables through the walls.
Do yourself a favor and pick up 2 packs of these and wrap at least one around every wire you have. You'll thank yourself later.
Ditch the electrical tape and get some velcro straps. Super cheap on Amazon: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/
If you are needing supplies to help with cable management, here are a few cheap options I’ve used for my setup:
https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_api_6OqWAb97M00Y9
https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_yQqWAbWSFBNQT
Hopefully this helps!
Thanks mate! I use three things.
Cable Raceways - https://smile.amazon.com/Channel-Desk-Cable-Organizer-SimpleCord/dp/B06XZPYP7Y/ref=sr_1_4?ie=UTF8&qid=1524417079&sr=8-4&keywords=j+channel+cable+raceway&dpID=51pQ1wOvFLL&preST=_SY300_QL70_&dpSrc=srch
Cable Clips - https://smile.amazon.com/GBSTORE-Plastic-Adhesive-Adjustable-Management/dp/B01GZX6G1W/ref=sr_1_13?ie=UTF8&qid=1524417093&sr=8-13&keywords=cable+clips
Velcro Straps - https://smile.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_4?ie=UTF8&qid=1524417113&sr=8-4&keywords=velcro+straps&dpID=41c7pxwXyYL&preST=_SY300_QL70_&dpSrc=srch
In the end it kinda looks like this https://imgur.com/qfLSsYT
Maybe more, but can't be much more at 6.78 per 100, I think they're even cheaper at lowes. http://www.amazon.com/o/ASIN/B001E1Y5O6/?tag=dp-us-20
No, privately owned vehicle. I was wondering if it was the ambulance you were having trouble with.
I can't see the arrangement of the plug, but you could try placing a non conductive "pry bar" between the plugs. This could be unsafe though...
You could also try something like this. This is a heated cable that is used for wrapping around plastic and metal pipes to stop water from freezing. I'm not sure how hot this actually gets, but I imagine you could wrap it around the block heater cord. I think they go as low as 150 degrees, which shouldn't melt the plastic of the other cable or anything.
It is also likely that putting some insulation around the cord might help as well. You could just get a 6" strip of normal fiberglass insulation fluff, wrap it around the connection point and then tie it down tightly with a velcro tie. When you're ready to roll out you just undo the velcro and hopefully the insulation would have been tight enough that no moisture was able to form into ice.
Perhaps you could also get a small outdoor space heater to place under the engine as well. It may keep the ambient temperature down enough? But with wind and distance, it might not be enough.
Perhaps bifurcate the power cable, add another one holding a 100w lightbulb or something and then hang it down into the engine next to the plug connection?
This is a great little space! A couple small things could go a long way to liven it up a bit more. You've got a lot of neutrals in here (which I love, my room has a pretty similar vibe). You could easily add an accent color or two and it would really go well in here - green plants do a great job of this and work nicely with the neutral palette you've got now. As was mentioned already, a fiddle leaf fig would do great in this room. You could also go for a majesty palm if that's more your style. I'd go with something big and bold to fill up the space a little and bring some life into it. If I were you, I'd put it just to the left of the TV stand, and maybe get a good floor lamp to go in the corner on the other side of the TV stand. As it is right now, I don't see any lighting other than the window light and the overhead lights. A floor lamp in the corner and maybe another small lamp somewhere else would go a long way to make it feel more cozy and homey once the sun goes down. I agree with what was said about a bigger rug, too. You've got the space for it, go big!
Also, this is nit-picky, but some of these velcro cable ties could clean up the cords sticking out by the TV and make it look a little tidier. Cleaner = cozier in my opinion. I used to install & service custom home theaters for a living, and I used these bad boys every day for cable management. It's amazing what a difference it can make when you can't see any cables!
This guy is in all of my bags. I also carry a North Face Surge 2, it's pretty solid, has a lot of pockets, the laptop pouch is lined so my device never gets scratched up. I have some velcro cable ties that have been very useful at times, but I also go into a lot of rack rooms still.
I agree with the comfy shoes, and I also carry some hand sani and wipes.
How about one of those Velcro cord wraps (like on a laptop cord)
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_zRt4ybY4NNT3V
This is a nice change from the typical setup, especially having two monitors on top of each other. Thanks for the variety. That said, some simple cable management would clean up everything nicely and make finding stuff, unplugging things if anything goes wrong, and moving stuff around if needed much easier. I don't think you need to do much. Some simple velcro ties could do wonders for you and is probably all you need.
They sell them by the roll cheap and they are amazing for cable management Amazon Velcro Ties for the cables behind each controller
For the cables: Velcro wraps
Oh, so basically a string made of rubber. Got it.
Untying a knot and then re-tying it in order to add a cable seems like a lot more work. With velcro ties it's just pull it open, place the new cable, then wind the velcro tie around again. I'm specifically talking about cable ties like these (image).
I'm not running lights or anything right now but I take one of these:
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
and cut it narrow enough to work and then afix it the same as zip ties. If you run your rifle hot you may have issues though. I seldom shoot enough to make things toasty so not a big deal to me.
I bought a batch of these babies. Made life much easier!
My store used to have the trough /u/caecus mentioned but we switched to a new type of steel so there was no place for the trough.
Honest suggestion? Get with your sup and have them move all the repeater boards to the center of each aisle. If the cat 5 cables don't reach to the panel there you'll need to convince them that running new cat 5 cable (and leaving a few feet of slack on each end) is cheaper than having an entire department waste hours of their time, and is cheaper than a whole box of new 25' hdmi cables.
Then convince someone (I wound up buying it for the department) to buy THESE and make sure everyone doesn't just cut them open.
In a trough or under the steel ideally you'll want to separate the power cables and hdmi cables into separate bundles but TV's move often enough that it won't be very practical.
Sauce: My warehouse/sup didn't even bother to listen and bought $500+ in cables instead (Sapphire corporate account). Don't be like us.
Protip: Replace the vga adapter (edit:for the computer monitors) with a cheap HDMI splitter
Zip ties or better yet these.
https://www.amazon.com/s/ref=nb_sb_ss_c_1_5?url=search-alias%3Daps&field-keywords=power+strip&sprefix=power%2Caps%2C173&crid=1N5DELLF4ZPFV
And
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1486255497&sr=8-1&keywords=velcro+ties
here
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
This and these.
I use these cheap straps plus this stuff for grip. It has worked very well so far.
Try to build your micro in such a way that the straps are easy to replace. Also put some electric tape over any sharp edges on the carbon (or file the edges smooth if you aren't lazy) so the straps don't get cut as easily.
OK, there are two ways to attach this thing to the Fidelio X2.
The first it to just plug them in directly to the bottom of the headphone.
Side View
Front View
The other option is to use a short AUX cable and then use a velcro zip tie to attach them to the headband. The AUX cable I bought was red, but you can get a black one to make it look less conspicuous.
Side View
Rear View
Front View
The short AUX cables I bought were these.
The zip ties I used were these.
Hope this was useful.
EDIT: If you're going to go the short aux cable route, then I strongly recommend finding a cable with 45 degreee connectors on both ends.
I've never really seen the pegboard before honestly but it just came to me. I wouldn't recommend it though, it took a bunch of time and is only for someone who likes doing organization. As far as cable management tips:
I feel your pain. Get the cheap Velcro cable ties. Like 10 cents each. I buy them from Lowe’s where I live but they are online:
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ref=pd_aw_fbt_60_img_2/191-5873394-0360649?_encoding=UTF8&pd_rd_i=B001E1Y5O6&pd_rd_r=5dd9b687-7b06-11e9-ab53-6922a0711ce1&pd_rd_w=JKLbE&pd_rd_wg=Gm9pO&pf_rd_p=3ecc74bd-d08f-44bd-96f3-d0c2b89f563a&pf_rd_r=HFG7GAQ0D5RG52JP1M1T&psc=1&refRID=HFG7GAQ0D5RG52JP1M1T
$10 for a 100 pack of velcro cable ties. Highly recommended...
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ref=sr_1_4?keywords=velcro+cable+ties&qid=1558357649&s=gateway&sr=8-4
You can probably tie it onto the back of the headset with velcro cord wraps (like these ones https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6 or something similar) without any need for physically sticking or gluing anything to the Quest at all.
The velcro strips I use are: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/
However, that's just what I had laying around. For the spools from lightning vapes, any 1/2" wide velcro should work.
This is what I use for cable managment: https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
These are the Amazon ones I mentioned. They're actually a little cheaper than the monoprice ones.
Not bad. I use a Better Homes & Gardens 8-Cube Storage organizer and canvas totes that match. Not as accessible as your idea, but I like having mine be tucked away.
Might I recommend Velcro One-Wrap Ties for your controller cords? Prevents any wire stress from wrapping around the controller but also neat and easy to use.
If you don't need 100 like my obsessively-organized ass did, they sell them in 50 or 25 packs. At Wal-Mart they even sell 5 packs but they're just so cheap to buy en masse... and once you start velcro wrapping your cables, you're HOOKED and can never go back to tangled messes again
I strongly recommend Velcro for the outside cables
Velcro would work as well without leaving tape residue.
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_tZ77yb3GAJBVX
Black velcro can also be used, and is safer to remove than cutting zip ties.
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6
i bought these a month or two ago https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
more cable ties than i'll ever need
https://www.amazon.co.uk/Micro-Trader-Black-Adjustable-Reusable/dp/B0169H26P4
those should be fine too. mostly 5 stars.
you dont really need anything fancy, either the ties work or they dont
http://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
I got some nice velcro ties off of amazon. They worked like magic, I will never use cabe or twist ties again.
I recommend these http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1421176688&sr=8-1&keywords=velcro+ties
How are those cable? I normally use cable ties ( https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_4?ie=UTF8&qid=1478409623&sr=8-4&keywords=cable+tie ) for my cables and concern that it might not work well with those type of cable. Also is the splitter on it heavy?
Like these?
Great job on taking the first steps!
---
Regarding FreeNAS (my preference). There are a ton of guides out there about how to set things up and what to do. My personal setup and favorite guide is 6 raw disks in mirrored zdevs. After running raidz3 for a year, then backing up, then trying out a raidz2, then reading to NEVER do raidz1, I decided to do a final backup, and rebuild into mirrored zdevs, and I've settled in and been running it now for about 4 years with 0 issues. I cant espouse all the benefits of this setup because the article I'm linking below will do a MUCH better job than I can in this post.
Read more about mirrored vdevs and why to use them here.
TLDR: instead of raidz1, raidz2, or some other structure, use mirrored vdevs to create your storage pool.
DISK0 & DISK1 = VDEV_A
DISK2 & DISK3 = VDEV_B
DISK4 & DISK5 = VDEV_C
...
DISKn & DISKn+1 = VDEV_n
last step:
storage_pool = VDEV_A & VDEV_B & VDEV_C & VDEV_n
---
Now if you are still reading, then great! Let me share a few things about operational uses for your home server.
I missed a few things I'm sure, but this is probably too large of a post to keep going. Happy building!
I included monitors, but it's way over budget and that's without peripherals besides those monitors or the operating system or any computer building tools.
PCPartPicker part list / Price breakdown by merchant
Type|Item|Price
:----|:----|:----
CPU | AMD - Ryzen 7 1700 3.0GHz 8-Core Processor | $378.99 @ Amazon Canada
Motherboard | MSI - B350 TOMAHAWK ARCTIC ATX AM4 Motherboard | $154.99 @ PC Canada
Memory | Corsair - Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory | $183.99 @ Amazon Canada
Storage | SanDisk - SSD PLUS 240GB 2.5" Solid State Drive | $114.68 @ Amazon Canada
Storage | Western Digital - Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive | $61.95 @ Vuugo
Video Card | EVGA - GeForce GTX 1080 8GB Superclocked Gaming ACX 3.0 Video Card | $689.99 @ Newegg Canada
Case | Phanteks - ECLIPSE P400 TEMPERED GLASS ATX Mid Tower Case | $99.99 @ Newegg Canada
Power Supply | EVGA - SuperNOVA G2 650W 80+ Gold Certified Fully-Modular ATX Power Supply | $134.99 @ Amazon Canada
Wireless Network Adapter | TP-Link - Archer T2U USB 2.0 802.11a/b/g/n/ac Wi-Fi Adapter | $30.00 @ Vuugo
Monitor | AOC - G2460PQU 24.0" 1920x1080 144Hz Monitor | $259.99 @ Amazon Canada
Monitor | BenQ - XL2411 24.0" 1920x1080 144Hz Monitor | $299.99 @ Amazon Canada
| Prices include shipping, taxes, rebates, and discounts |
| Total | $2409.55
| Generated by PCPartPicker 2017-08-25 04:23 EDT-0400 |
Operating system
Amazon links to the download or the USB. If you pick the first option, you'll have to make a bootable USB drive.
Useful videos
Tools you'll need
Other peripherals
Feel free to ask anything.
Note: all Amazon links are to the US site, not the Canadian one. The PC build, however, has all Canadian links.
EDIT: Formatting.
EDIT 2: If you pick one of the two monitors, pick the BenQ one. It's a nicer monitor.
Try these, cheap and reusable!
Velcro straps?
Ended up getting this instead
I have an IKEA Linnmon desk so there's a pole where the cables are going in the back. I velcro my cables to that pole since my desktop is under the desk.
I recommend investing in this velcro pack: https://smile.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
Maybe try adhering some velcro to the handle and a drawing glove? Those don't have much grip, though, so it might actually be MORE slippery.
Or just make some kind of hand harness out of nylon cord and/or velcro cable ties?
What you need are some Velcro Reusable Self-Gripping Cable Ties. They take up less space, and it's easier to find the right cable in a box.
You could use these too:
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6
I prefer http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ (there's a version with half as many for just above half the price, but it's worth having extras)
I dont do too many field-fixes anymore... Im now in startup land where everything is shiny & new, and we get what we need.
 
My things that were stupid-useful that mostly haven't been listed so far:
Klein Tools electrician scissors - Most useful cutters ever. Take-a-finger-off sharp, cuts though thick cables, the top is great for straining phone / ethernet cable. A cable puller had a set, and he sold me on them in 30 seconds when he raked the wobbly cat5 strands across them, and they were perfectly straight. Would have been worth the $$ at twice the cost.
I replaced my mismatched tools in my bag w/ a iFixit toolkit when I needed to start buying new bits for iPads and the tri-lobes for macs. Ended up being about the same cost as those bits alone, and it had them, and a bunch of other stuff that was better then my cobbled together tools. The screwdriver is far-better made then the little plastic ones I had before. They have a new-toolkit, but I haven't used it.
A roll of Velcro ties Far more useful then zips. Use the scissors above to trim as needed.
Mars-eraser. Great for cleaning toner from printers, and cleaning up corroded connectors (first pass).
Melamine Sponge (aka Magic Eraser) - They clean up things nothing else does like the weird tint that macs wrist guards get from skin oil. Also great for getting toner off of the outside of printers. Also good for cleaning up cherry-coke from a $25k piece of sound gear.
Deoxit - You can use the cheap stuff that was like $5 a can at any automotive parts store, and that will work for most things. This is for more sensitive stuff. I used this repairing contacts in audio-control-surfaces, rebuilding DSLRs, etc. Its for when more then a mars-eraser is needed.
Nuh uhh girl, you gon' need [dis] (http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6) for dat weave of urs. And some of [dat] (http://www.ikea.com/us/en/catalog/products/30200253/) cuz you got wayyyyy 2 much goin on booboo.
On the bag itself, I just sewed 1.5" strips of webbing (effectively around 1" after I tucked and sewed them), and then I used velcro cable ties (these) to go from the webbing to the frame.
Here. Get a hundred for under 9 cents each. I've never had an issue with them damaging anything.
You can also get them in other colors. I think my colored ones came from Monoprice.
I’ve seen zip ties mentioned several times so instead of replying to each of those comments, I’ll make my own saying DON’T USE ZIP TIES! Use Velcro cable wraps .
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
I just use velcro wraps like these.
I run the cables under the board and just wrap around the slats to hold the cables in place. Once the pedals are on the board the wraps aren't noticeable and because they're velcro they're easy to remove and redo if/when I reset my pedal board.
I ordered four packs of these a few years ago, and my velcro-tie needs are now met for the rest of my life.
100 Velcro Straps for $10 from Amazon. Don't skimp on your cable management.
Zipties are a great addition for those snug places where getting a tight hold with a strap might be difficult.
The only tool you'll need is a small screwdriver. If the tip is magnetic, you're in great shape. There can be some difficult-to-reach spots and being able to get a 2nd screw-holding hand out of the way is massively helpful.
Depending on room lighting, I've sometimes wished for a small headlamp but that's just me.
Not zip ties. You have to cut them whenever you need to adjust anything, run another cable, whatever - and then replace it with a new one. It's both wasteful and inconvenient. Get a good set of Velcro cable ties instead.
Bonus: They're just as useful for cable management around your desk as they are inside the case!
Victor
You should get some of these.
Another option
I would recommend velcro. I've done the zip ties before and it's a pain in the ass to cut them all when you want to move stuff around. Something like these.
VELCRO Brand - ONE WRAP Thin Ties, 8 x 1/2-Inch, 100 Count, Black https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_i_SphaBbVD4R8ZR
WireTamer Cable Management Tray (2 Pack, Black) https://www.amazon.com/dp/B01BVYW7UY/ref=cm_sw_r_cp_apa_i_-rhaBbAYX7GVF
I used these two of Amazon to make all my cables disappear and for pretty cheap 30$. Both products are amazing I've for no issues with either one. Good luck hope this helped.
An IKEA Signum rack would do nicely coupled with some vel-cro cable ties (or zip ties) and a power supply box / cable box
Links:
-Signum (https://www.amazon.com/IKEA-SIGNUM-management-horizontal-silver/dp/9178905931/ref=sr_1_1?ie=UTF8&qid=1526526485&sr=8-1&keywords=ikea+signum)
-Velcro Strips (https://www.amazon.com/VELCRO-Brand-2-Inch-Count-Black/dp/B001E1Y5O6/ref=sr_1_3?s=office-products&ie=UTF8&qid=1526526511&sr=1-3&keywords=velcro+strips)
Power Strip / Surge Protector Box (https://www.amazon.com/Bluelounge-CableBox-Black-Management-inches/dp/B0019T0JA2/ref=sr_1_2?s=office-products&ie=UTF8&qid=1526526547&sr=1-2&keywords=power+strip+box)
This! Here's a bigger pack if you prefer: https://www.amazon.com/gp/product/B001E1Y5O6/
[These] (http://smile.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1) will help you get started on cable management.
Cable anchor: https://www.amazon.com/gp/aw/d/B00AUB81DC/ref=mp_s_a_1_2?ie=UTF8&qid=1472726511&sr=8-2&pi=SY200_QL40&keywords=zip+tie+mount&dpPl=1&dpID=41yxopuQylL&ref=plSrch
(Use if u want to use zip ties, will probably be able to keep them hidden)
Velcro straps: https://www.amazon.com/gp/aw/d/B001E1Y5O6/ref=mp_s_a_1_1?ie=UTF8&qid=1472726568&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=velcro+straps
(Will probably be able to be seen)
I use light duty Velcro strips to tie them up. Then I toss them into a see-thru bin.
https://www.amazon.com/gp/aw/d/B001E1Y5O6/ref=mp_s_a_1_5?qid=1465361448&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=Velcro+strips&dpPl=1&dpID=31SGEFLLv%2BL&ref=plSrch
These may be of some help.
http://www.amazon.com/gp/product/B001E1Y5O6/ref=wms_ohs_product?ie=UTF8&psc=1
I use these on everything. My home usage cables and my work A/V cables.
I use Velcro ties.
//edit
wrong URL
Op, correct me if I am wrong, but they look like the super awesome ones from Amazon - I keep them on hand as they are super useful. https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
Looks closer to these cable ties. If it's not, you should get some; it's absolutely the best cable tie in existence. You can cut it with any scissors, and it's got a surprisingly good holding power; I used it to secure my X5 to the scale when I thrust tested it, and I'll probably use it (in much higher quantities) on my Martian.
https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
nice setup!
pick up some velcro strips for cable management, they're really low cost and can improve the look and feel of your gear.
These velcro ties are awesome for network/computer equipment:
https://www.amazon.com/gp/product/B001E1Y5O6
Apparently, I paid nearly 1/2 of the current price but that was also in 2011. 100 lasts forever at home. They are cut stamped so there is a little opening that the loop can go through. I never thought I'd get excited about velcro ties but these are awesome.
Here is 100 for $11 on amazon.
These, these, and this. That's what I used, turned out decent.
http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
These velcro ties makes everything much easier. I wished I had this when I first built my computer. Best part of all, it is really cheap!
These are my go-to for short cables. With 100/pack, you'll have velcro on everything, including the cat.
These are a good start.
I've used velcro straps on mine to great success, and I'm in a similar boat with the Classic 2 and a Phoenix power supply. I connect two or three of those straps together and wrap them around the power supply and the top crossbar, one near each end of the power supply so as not to block the plugs. I also put a small piece of regular adhesive velcro on both the power supply and the underside of the board to keep the power supply from sliding.
It keeps the power supply securely mounted, costs very little, is easily removable and reusable if I need to move anything, and doesn't interfere with the velcro on top that the pedals need to stick to.
I'd recommend using these velcro ties since they can be reused and you can adjust them if you add/subtract cables from your bundle!
This is still messy, but coming off of my Extron I essentially only have THREE wires coming off. OK, two are large bundles of wire held together by velcro one runs to the monitors, the other to the area where all my video game consoles are. The third is simply the power cord for the Extron:
https://i.imgur.com/hcZGnM6.jpg
Velcro is your friend as well:
https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
You gotta buy this: https://www.amazon.com/gp/product/B001E1Y5O6
You also have to buy extensions/long versions of each cable. Its easier to cable manage when you have long cables v.s. short cables. I know it seems contradictory, but at least for cables that are outside the case (i.e. not PSU cables) then the longer they are, the more you have to work with and you can route them any way you want (e.g. so you can route a power cable all the way around something instead of going direct because its too short).
Then, on the back of your PC/monitor/what have you, you have to bunch up all the cords into a group. This becomes the "dock" of that object.
From there, you just need to keep grouping them all into one big "trunk" line.
For my table, I'm lucky that it comes with this "catcher" net for all the cables, but you can also install one easily from IKEA. If not, you can still route the whole trunk behind the table or somewhere where it can be hidden.
Buy these 2 cheap items off amazon. I used them to route all my cables under my desk, behind my computer, where ever. They are pretty awesome. You can also get little tiny zip ties if you want something more permanent.
http://www.amazon.com/gp/product/B00AUB81DC/ref=oh_details_o06_s01_i01?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_details_o06_s01_i00?ie=UTF8&psc=1
I thought these came in handy when building my pc. Velcro ties
Wrap you cables (all cables!) using the over under technique
http://www.youtube.com/watch?v=MziOBf60Kn0&feature=related
and get yourself some of these!
http://amzn.com/B001E1Y5O6
I just bought a pack of these: http://amzn.com/B001E1Y5O6
and a pack of these: http://amzn.com/B000OEJARG
it does wonders!
same link, but shorter: https://amzn.com/B001E1Y5O6
:)
If you know of a store with some kind of clearance junk isle (wal mart, target, k mart, etc), dig around in it. You may be surprised what you find. I found these for $2. Blinking they should get around 150 hours battery time, if I recall. I put the red one on the back of my helmet and put the white one away for when I find another place to put it. Then I bought two more lights in a pack, a head and a tail, for $12. None too powerful, but tail lights don't need to be, and in my neighborhood I'm never too far away from a street light unless I really try.
If you have the right kind of helmet, you may find a literal headlight pretty easy to macguyver out of an otherwise cheap light not made for mounting. I've done this. In september (?) I got this pack of 3 headlamps for only $8+tax at a store. They're more than bright enough, and the adjustability is fabulous. Using just two zip ties I managed to fasten one securely to my giro venti. I love using it, all the reflective stuff for 40 yards in front of my lights up clear as day. Stop signs, license plates, reflectors, lane paint, glass and sand on the ground. If I set it to blink it actually looks like the stop signs and license plates are self-lit and blinking. And at such a cheap price I'm not too worried if something happens and I break/lose it.
So there you have it. $22+tax and I got seven lights, 4 in service at any time.
pro-tip: since it's april, april shower time, you should think about water-proofing your lights using pieces of spare inner tube. It holds nice and tight on all my lights' seams, and is easily dealt with when time to change batteries.
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-90924/dp/B000F5K82A/ref=sr_1_2?ie=UTF8&qid=1322440936&sr=8-2
http://www.amazon.com/Plastic-Cable-Ties-100-Pack-Black/dp/B002C0SKBW/ref=sr_1_5?ie=UTF8&qid=1322440952&sr=8-5
Route them through the back. Did you get a modular psu? Do you have zip ties?
Or you can buy a100 pack of Plastic Cable Zip Ties 100 for $2.04
https://www.amazon.com/Plastic-Cable-Ties-100-Pack-Black/dp/B002C0SKBW
Or 200 of various sizes for $8.99
https://www.amazon.com/gp/product/B00L2LGMO4/ref=s9_acsd_top_hd_bw_b2872_c_x_1_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-3&pf_rd_r=8SC7SZKKB12HE6B1R3PF&pf_rd_t=101&pf_rd_p=0d8c1e4e-8bfd-54f4-99ad-add0e5a7e72b&pf_rd_i=507844
In regards to your cable question on Imgur,
Ikea Signum if you can fit it. Put the power strip and all of the cables in it and the only wire that will be visible under the desk is the power strip to the outlet.
For the monitor cables, you can get some adhesive zip tie downs and stick them on the back of the monitors to run the cables to the center monitor and then run those down the back of the mounting arm.
I mounted mine under my gunwales using the adhesive tape backing and a cable tie mount every few feet. Holds well but hard to tell if it will work for your situation without seeing pics of the boat. I leave mine on the red setting because it apparently doesn't impact your night vision the way other colors can. https://www.amazon.com/gp/aw/d/B003L16ZYU/ref=mp_s_a_1_3?ie=UTF8&qid=1498686335&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=cable+tie+mount&dpPl=1&dpID=31jbcFP3ezL&ref=plSrch
If you don't mind taking all of it off.....Which seems like a bad idea considering how much work you put into it, I would recommend using these cheap monoprice velcro straps.
I did all the cableing in my PC in about 30 minutes using those.
Depending on the kind of ties, this isn't as ridiculous as it sounds.
Type 1
Type 2
Don't know specifically what they're used for, but I know there exist ties with metal cores that police and military use to prevent you from breaking out of your restraints
I have reason to believe that person was using neither of the above types, though, and is indeed a moron.
Zip ties come in steel, too: https://www.amazon.com/Strip-Stainless-Steel-Locking-Cable/dp/B004C3C22K
Or a zip tie gun ...
https://www.amazon.com/Bluecell-Releasable-Reusable-Organization-Management/dp/B008OC2EE6
50 reusable zip ties for less than $3 shipped. The twist ties are alright in a pinch, but I much prefer the look of the zip ties.
Also
http://lifehacker.com/5903220/unhook-and-reuse-plastic-zip-ties-with-a-simple-trick
You could try these metal zip ties to get even more traction. credit to /u/wanab3
Stainless steel zip ties
https://www.amazon.com/dp/B00CTKBTH2/ref=asc_df_B00CTKBTH25156893/?tag=hyprod-20&creative=395033&creativeASIN=B00CTKBTH2&linkCode=df0&hvadid=198062682203&hvpos=1o2&hvnetw=g&hvrand=11313844829823666743&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9031178&hvtargid=pla-319814610888
https://www.amazon.com/gp/aw/d/B00CTKBTH2/ref=mp_s_a_1_1?ie=UTF8&qid=1466924563&sr=8-1&pi=SY200_QL40&keywords=metal+zip+ties&dpPl=1&dpID=41sL1hNxSVL&ref=plSrch
For the Lazy
I used light fixture hangers that raise and lower and zip tied them. I pretty much zip tied everything lol.
https://imgur.com/a/xLozmRy
https://imgur.com/a/YjJ7xrQ
https://www.amazon.com/dp/B01E89NRNU?ref=ppx_pop_mob_ap_share
https://www.amazon.com/dp/B00L2LGMO4?ref=ppx_pop_mob_ap_share
> building PC's isn't as fun as you think it is
Depends what you like of course, for me.. It's a lot of fun! I love to thinker around with hardware. I hope to be able to make it my job eventually.
> you should just get this Alienware Aurora
>> I'm like dad it's the same price for equal specs for the computer alone, it doesn't include the monitor and keyboard..
I think you get better "specs" in terms of quality on a custom made PC compared to a Dell Alienware. They use cheap RAM, PSUs and sometimes OEM motherboards just to keep the price down and get more margin/profit.
> The last time I was really spoiled or anything for Christmas was way back when I first got a Nintendo DS Lite ahahah!
Hah, I think the last time I got spoiled for Christmas... was perhaps the Nintendo 64! I mean, I always got spoiled a little bit I guess, but that was one I won't remember.. god time flies tho.. I was, 13 I think! I've doubled this now..
---
> Oh yeah, with the new case and everything, do you know the best way to go about putting everything together?
I do!
Then you place the motherboard on the box, not on the bag!
Plug those into the PSU!
You've tested your systems (aside from the storage) and are ready to start building.
Add two SATA / Peripheral cable into the PSU. This is needed to power up the storage devices, and you want two because you will place them far away from each other, so one cable won't be able to reach both of them.
Grab the IO shield (came with the motherboard) and put that into the case! The round holes for the audio are at the bottom. Be careful, this can be a bit sharp - I've cut myself a few times before. It does require a good push on the corners to snap in most of the time.
The HDD needs to be placed into a bay behind the big cover. I would probably suggest to place it either at the bottom or at the top. Depending on how long your SATA power cable is. Bottom is probably easier, but you have to see for yourself a bit here, I haven't used the H440 personally yet.
If they are, then lower the motherboard into the case, you can do this very easily by grabbing the CPU cooler. Push it into the IO shield first at a slight angle, then lower it down further and voila. Screw in all the screws, don't go too tight. It just needs to keep it in place, it won't vibrate and go out of place.
If you did not make any mistake with the power switch and plugged in all the power cables correctly, it should turn on just as before.
---
If you have any questions, ask away! Most of these steps can clearly be seen in the video on how to build a PC.
These to hold cables to back of desk
These to bunch cables together
Neater than cable ties and you don't have to cut them open if you need to add another cable.
if it's a configuration i'm keeping for more than a year, cheap zip ties. if it's temporary, i have a set of velcro straps. if you wanna go fancy you'll want some wall mounts and things instead, if i remember i'll pop back and throw some more amazon links up.
I used these: https://www.amazon.com/gp/product/B000FPAI3Y/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 for my attic cat6 runs and they worked out great. They were also good for holding the coax. The cables can split off from these to their respective headers without any fuss.
Use velcro straps to tie bundles together, never zip ties.
I know this is a bit late but maybe you haven't worked on your cable management yet. Zip ties do the trick but can be a pain in the ass when moving things around. They have to be cut for cables to be replaces. Velcro straps like these will keep the cables in place while being reusable and easy to remove.
Since you are in/going to college it is safe to assume your gear will be moved around at least once a year. You do not want to have to cut and redo zip ties each time.
Yeah. Just like these. Attmu 50 PCS Reusable Fastening Cable Ties, Microfiber Cloth 6-Inch Hook and Loop Cord Ties, Black https://www.amazon.com/dp/B00O9VKVFK/ref=cm_sw_r_cp_api_i_APZ2Db22TMV6G
Paint : 45 Dollars
https://www.amazon.com/Jolie-Paint-Accessories-Quart-32oz-Gentlemens/dp/B07KFL722B/ref=sr_1_1?keywords=blue+wall+paint&qid=1572963787&sr=8-1
Dual monitor Arm : 35 Dollars
https://www.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V002/dp/B009S750LA/ref=sr_1_9?keywords=monitor+arm&qid=1572963822&sr=8-9
Drill a hole in your desk : 0 Dollar
Cable cover : 15 Dollars
https://www.amazon.com/D-Line-Raceway-1D3015W-Electrical-Paintable/dp/B077YD9DG6/ref=sr_1_3?keywords=cable+cover&qid=1572965300&sr=8-3
Cable straps : 8 Dollars
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/ref=sr_1_3?keywords=cable+straps&qid=1572965368&sr=8-3
Cable sleeve : 9 Dollars
https://www.amazon.com/Alex-Tech-10ft-Protector-Sleeving/dp/B07FW3GTXB/ref=sr_1_2_sspa?keywords=cable+sleeve&qid=1572965405&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSzhQR1pSSU40Rks4JmVuY3J5cHRlZElkPUEwNjgyMDQ5MkpQU1lMMlhMV0g1RiZlbmNyeXB0ZWRBZElkPUEwODEyODg1Mkw4UEE5T1Q2SkNDRCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
​
Double sided tape : 6 Dollars
https://www.amazon.com/ReLuien-Adhesive-Reusable-Washable-Anti-Slip/dp/B07Y1QWZ5V/ref=sr_1_1_sspa?crid=1OOIXED1G83R8&keywords=double+sided+tape&qid=1572965456&sprefix=double+%2Caps%2C267&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTkQ1SklLSzBYV1BSJmVuY3J5cHRlZElkPUEwNjM1NjgzMVpPMEZKTjhSUFpNTSZlbmNyeXB0ZWRBZElkPUEwNjU0NTA0MkNKTVNEMzZGWFhSQyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Total cost : 118 Dollars
You're right i'm waaaaaay off my estimated price, it's about half the price i thought it would be.
I'm sorry dude I just gave my opinion on how to easily improve the aesthetic of your setup but you clearly don't really care about it, then again why post on this sub reddit then ?
Twist ties work, but they look a bit sloppy.
The zip ties are okay, but they're permanent, and kind of suck if you want to move things around later.
Velcro ties are alright. But I find they're usually too long, and end up wrapping them around and around and around, which makes the ties look bulky, and unkempt.
https://www.amazon.com/gp/product/B00O9VKVFK/
If you have a big bunch of cables all going the same way, you can use one of these: https://www.amazon.com/gp/product/B004M8SSW8
I used one of those for my V-drum set. You know, with each drum head and cymbal having its own chord running around the frame to the drum unit, it looked much, much nicer when they were all bundled and covered together.
The nice thing about those big cable sleeves is that they're wide enough to run a cable through doubled over without pinching anything. You know, if the cable is too long, just loop it back around to the other end and back again through the tube until the length is right where you need it.
Aside from that, and if you have cables that need to be out in the open (like mic cables), just try to coil the excess neatly under the mic stand so it doesn't look quite so messy. And coil them loosely around the stand so they don't stand out or wave around so much.
get yourself some VR Covers
https://www.amazon.com/gp/product/B0779VGT9W
---
a USB extension cable
https://www.amazon.com/gp/product/B00C7SA21U/
---
an HDMI extension cable (you only need one, but you can't beat the deal)
https://www.amazon.com/gp/product/B00JJ517VI/
---
a pack of velcro ties for the cables
https://www.amazon.com/gp/product/B00O9VKVFK/
---
bluetooth 4.0 adapter if you don't have one (or don't have a good one) and plug into a USB 2.0 port if possible. put it on the end of any USB extension cable will help ensure a direct line of sight to you from the adapter.
https://www.amazon.com/gp/product/B009ZIILLI/
---
and finally, if your USB ports fail the WMR test, get this card
https://www.amazon.com/gp/product/B011LZY20G/
Sure thing:
https://smile.amazon.com/gp/product/B018K8UGKM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B06ZZBRC63/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B00O9VKVFK/ref=oh_aui_detailpage_o04_s06?ie=UTF8&psc=1
For the cable concealment; if you are just going to use it for the single sensor cable maybe don't get those wide flat one; get the ones that are more like a square pipe, much smaller profile.
Yeah the following items will help out a lot.
I use these and love them. Only $8 to keep all the cables in your house organized
these cable ties could be put to good use. You can use them to wrap the HDMI cords to the back of the poles that hold the monitors. As for the cords bellow the desk, you can wrap them all together with a tie or get something like this to run along the wall.
Alex Tech 25ft - 1 inch Cord Protector Wire Loom Tubing Cable Sleeve Split Sleeving For USB Charger Cable Power Cord Audio Video Cable – Protect Cat From Chewing Cords - Black https://www.amazon.com/dp/B07FW3MKGH/ref=cm_sw_r_cp_api_i_IFo0CbT7FDW0S
Pasow 50pcs Cable Ties Reusable Fastening Wire Organizer Cord Rope Holder 7 Inch (Black) https://www.amazon.com/dp/B0154MS9Q0/ref=cm_sw_r_cp_api_i_tGo0CbCF1T2B0
eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_api_i_0Go0Cb8EVVNYV
Plus some other materials i probably missed but a quick amazon search of “Cable Management” on amazon can start to trigger some awesome ideas.
You really gotta sit there and stare at it and think how you can hide everything, neatly and routed in a way thats easy to clean. Having my monitors wall mounted allowed me to use the brackets to hide the long monitor power cords and hdmi cables i was also able to mount a power strip behind there so it was easier to power things while hiding wires.
You can buy Velcro cable ties that make cable management a relative breeze.
Here's 50 of them for under $10-
https://www.amazon.com/dp/B0154MS9Q0/?coliid=I2L21N9XWY9JIO
Had about fixing the cable clutter. I highly recommend these https://www.amazon.com/gp/aw/d/B0154MS9Q0/ref=mp_s_a_1_6?ie=UTF8&qid=1500860828&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=velcro+cable+ties&dpPl=1&dpID=51lf5Z18ACL&ref=plSrch. You'll love them 2 ! Tidy up cowboy
Get a pack of this:
https://www.amazon.com/dp/B071RGCJLT/ref=cm_sw_r_cp_apa_i_750mDb8RBTW54
Excellent solution, specifically for those under table cables.
I use these
Rustark 50Pcs 2 Sizes Adjustable Self-Adhesive Nylon Cable Straps Cable Ties Cord Clamp for wire management, Large and Small https://www.amazon.com/dp/B071RGCJLT/ref=cm_sw_r_cp_api_i_Em92DbY36XRXX
And basically get the cables together and have them running out of sight through the bottom of my desk (can also be done in the back of the desk border if it isn’t against the wall too tight), and then have them all going to two extension outlets out of sight/back side of the table. Judging on your specific desk, you can put the power outlets on one of the table legs since they’re thick
Literally one of the most affordable and easiest projects (cost me just under $30 for the stuff I needed)
$8 cable management clips and an $18 little cable concealer kit from amazon.
Here are the links for the exact ones I used here
Clips: https://www.amazon.com/gp/product/B071RGCJLT/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Cable Concealer: https://www.amazon.com/gp/product/B07BLQPVFD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
They make stainless steel wire ties
I'm surprised a standard 1/2 band width doesn't fit. You'll probably have to go down one size to a 5/16" band width. http://m.hoseclampkings.com/cat-122-1-89/410-ss-screw.htm has a bunch but their MOQ is 100 units. Search on Google for a 5/16" band width hose clamp. They are typically in shorter lengths due to their smaller width but I'm sure somebody makes them in longer lengths.
You could also try stainless steel zip ties: https://www.amazon.com/SunplusTrade-Stainless-Exhaust-Multi-Purpose-Locking/dp/B072WC1MXT/ref=mp_s_a_1_3?keywords=steel+zip+ties&qid=1558490451&s=gateway&sprefix=steel+zi&sr=8-3
Hose clamps are best but baring that they also sell Metal Zip ties that also work in a pinch. I always stock some, never needed them on my stuff but I've given away a fair few.
Yeah, I see. That does sound to be an issue where the force of the snow is stronger than the pieces holding it together.
The plastic buttons will only work if they actually fit in the holes though. My old splash shield was actually held on by metal screws. Which did the job until they just corroded and rusted to the point where they would fall off.
The zip ties always worked for me but I also didn't have to drive through deep snow with the car. If anything, it was mostly just slush.
They do have stainless steel zip ties. Maybe they would be strong enough to hold it in place?
https://www.amazon.com/SunplusTrade-Stainless-Exhaust-Multi-Purpose-Locking/dp/B072WC1MXT/ref=pd_sbs_263_t_0/136-5397765-0847362?_encoding=UTF8&pd_rd_i=B072WC1MXT&pd_rd_r=fdc24f29-0782-4b9c-8b96-6f9031e56660&pd_rd_w=a5n13&pd_rd_wg=Za0YO&pf_rd_p=5cfcfe89-300f-47d2-b1ad-a4e27203a02a&pf_rd_r=3VYS6GE0YT7HE0E9XAT4&psc=1&refRID=3VYS6GE0YT7HE0E9XAT4
Thank you good Sir!
I used these cable clips below.
https://www.amazon.com/gp/product/B075Y9J42T/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
I did a lot of research of several types of cable clips on Amazon and after using these ones i would definitely recommend. The adhesive is very strong compared to others. I just put these all over the back of the edge table and routed the cables through them. Worked like a charm! I also used three of them to clip the power strips to the bottom of the desk. I would cut the zip tie of one of them and run the other two zip ties through 1. I don't know if that makes sense. I can add pictures. Might be easier to understand.
In case you ever decide to go with Velcro, these are great, and like 1/10th the price of Velcro brand at the store.
Here you go bro, you dropped these.
https://www.amazon.com/Strip-Stainless-Steel-Locking-Cable/dp/B004C3C22K/ - These are the ones I have. I use them on stuff around my house.
And for those jobs that require the ties to be fire resistant, go \m/etal!
I prefer one of these
https://www.amazon.com/Eastwood-Professional-Cable-Wire-Tie/dp/B006ISG5M0/ref=sr_1_4?keywords=cable+tie+gun&qid=1566425106&s=gateway&sr=8-4
A zip tie gun.
https://www.amazon.com/Eastwood-Professional-Cable-Wire-Tie/dp/B006ISG5M0
https://www.amazon.com/Eastwood-Professional-Cable-Wire-Tie/dp/B006ISG5M0
Our IT technicians use these at work here to clip zip ties. They cut off the extra length cleanly and easily. The edges aren't sharp, and you don't need to go in from odd angles. They use a $300 one, but these look good too.
https://www.amazon.com/Bluecell-Releasable-Reusable-Organization-Management/dp/B008OC2EE6
You're dumb.
Get the zip ties you can reuse, therefore they wouldn't be classified as restraints.
Edit: I mean how can they be classified as restraints if you can undo them, right?
https://www.amazon.com/Bluecell-Releasable-Reusable-Organization-Management/dp/B008OC2EE6
Personally, I chose these over Velcro
AIRSUNNY 50pcs 150mm Releasable/Reusable Plastic Zip Cable Wire Tie for Organization/Management https://www.amazon.com/dp/B008OC2EE6/ref=cm_sw_r_cp_api_IIwVBbNZ997ZF
I felt like Velcro loses its stick after awhile so these can be used and undone without really worrying about wear. I don’t care too much if the longer part of the tie is sticking out, but if you do, you can cut just a little bit after the connection and still have a reusable zip tie that isn’t too noticeable. I’m no expert, but the ties have been a lifesaver for cable management for me when the Velcro ones failed.
>no cutting
Such a typical redditor, commenting without even watching the video ^^/s
But seriously there are plenty of (intentinally) reusable ones.
http://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE
+
http://www.amazon.com/Cable-Matters-Combo-Self-Locking-12-Inch/dp/B00L2LGMO4
You could do something as simple as zip ties and tie mounts. They really just need to be run in a clean manner.
https://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE
https://www.amazon.com/Cable-Matters-Combo-Self-Locking-12-Inch/dp/B00L2LGMO4/ref=pd_lpo_23_bs_img_2?_encoding=UTF8&psc=1&refRID=5DYNP9R4B5H3AEXY4DNY
They are probably sized from whatever malnourished rodents roam the alleys near the chinese factory where they are made.
If you're remotely competent with a needle and thread you can easily make your own. I did it with some velcro wire ties and paracord sewn together. I think the trick it to make it so they don't feel swaddled by it, which will make them react like that.
It looks good for your first try but these links will help you do better:
https://www.amazon.com/Channel-Desk-Cable-Organizer-SimpleCord/dp/B06XZPYP7Y?ref_=Oct_RAsinC_Ajax_11042051_0&pf_rd_r=1N24GCVAEKH8VXVCV1MH&pf_rd_p=aa2c769d-eec9-5298-93e3-59e57ff9c396&pf_rd_s=merchandised-search-10&pf_rd_t=101&pf_rd_i=11042051&pf_rd_m=ATVPDKIKX0DER
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK?ref_=Oct_RAsinC_Ajax_11042051_1&pf_rd_r=1N24GCVAEKH8VXVCV1MH&pf_rd_p=aa2c769d-eec9-5298-93e3-59e57ff9c396&pf_rd_s=merchandised-search-10&pf_rd_t=101&pf_rd_i=11042051&pf_rd_m=ATVPDKIKX0DER
Strive for excellence in all you do, always.
You can get some relatively cheap Velcro cable ties off amazon. I use these: https://www.amazon.com/Attmu-Microfiber-6-Inch-Reusable-Fastening/dp/B00O9VKVFK/ref=sr_1_4?ie=UTF8&qid=1475244613&sr=8-4&keywords=velcro+cable+ties
What about the velcro type? Or just zip tie?
https://www.amazon.com/Rustark-Adjustable-Self-Adhesive-Straps-management/dp/B071RGCJLT
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK
First, as others have said, get cables that are as close to the correct length as possible. If not, try to bundle like cables together so you have one big bundle area.
Then, get yourself a pack of adhesive backed cable tie mounts and a pack of velcro ties:
https://www.amazon.com/Self-Adhesive-Cable-Management-Zip-Tie-Package/dp/B073RSB4GR/
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/
I use those in combination to route cables along edges, under shelves, etc. If you have several cables that need to make the same route (like from your TV to your receiver), try to bundle them all together when possible (not power with signal for instance).
If you do have to cross signal cables (especially analog audio cables) with power cables, try to make the cross as close to 90 degrees as possible to minimize electrical interference.
Wrap them "over-under" and use cable ties similar to these. Other than that, store them neatly and try not to walk on them
I think I'd still prefer these, for cables, since they're just always on the cable. Just about every camera cable or BNC I have has one of these on it. You can wind it and wrap your cable nicely, or when you plug the cable into your camera you have a convenient tie to tidy up the camera with.
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Multi-color/dp/B00T2JQ0ZE/ref=pd_sbs_201_3?_encoding=UTF8&pd_rd_i=B00144CABS&pd_rd_r=78W4R4ST5S50NQD2XN0F&pd_rd_w=V9o9C&pd_rd_wg=96TF0&refRID=78W4R4ST5S50NQD2XN0F&th=1
EDIT: These would be good to replace bongo ties with since bongos are breaking constantly.
EDIT2: Amazon has a really good deal on some too.
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/ref=sr_1_4?ie=UTF8&qid=1498509092&sr=8-4&keywords=hook+and+loop+cable+ties
I used a lot of velcro strips and spiral wrap. I'd reccomend these over zip ties so when you upgrade cables or get new components you can reuse your straps. I still need to get one of those cable boxes to put my surge protector into though. If you end up getting a desk with an open back then these help out a lot too. It helps that I have a half backboard to help hide things.
No, like cut a bunch of pairs of slots that looks like equal signs (=) laterally along the back. Then you can use velcro ties like these: http://www.amazon.com/Attmu-Microfiber-6-Inch-Reusable-Fastening/dp/B00O9VKVFK/ to manage your external cables from all the devices I listed above. Cut them like every 6" or so.
Why do the cables need to be attached to the pegboard? Maybe just use some Velcro ties to keep all the cables bundled together?
I use these if you're interested.
My advice is using some Velcro cable ties to hold cables together and then route them that way. Command Hooks are also good like ghostrunnersaid1 said.
https://www.amazon.com/gp/product/B00O9VKVFK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Pasow Reusable Fastening Cable Tie Organizer, 7-Inch, Black, 50 Piece https://www.amazon.com/dp/B0154MS9Q0/ref=cm_sw_r_cp_api_d0X3ybC6JBJ6K
That's easy to fix:
Anti-vibration kit,
fan gasket,
PSU gasket, acoustic padding, cable ties, etc.
All reusable -
https://www.amazon.com/dp/B0154MS9Q0/ref=cm_sw_r_sms_apa_i_IZoKDbDQE1SPG
https://www.amazon.com/dp/B07MBTSTLL/ref=cm_sw_r_sms_apa_i_z1oKDbJZ5XP99
https://www.amazon.com/dp/B00D31RV4Q/ref=cm_sw_r_sms_apa_i_N4oKDb2DD8WXV
I recently organized all my cables, ordered some stuff off Amazon & I highly recommended this, this, & this!
If you're averse to drilling into your desk like I was, here's what I used for my cable management with less room to work with than you, OP.
The Basic Stuff
2 x 40" Cable management sleeves- $14
30 x adhesive cable management clips- $7
50 x reusable velcro ties- $8
2 x Cable management bins- $23
The strongest double-sided 3M tape you can find- $10 at your local hardware store
Optional, but highly recommended
AmazonBasics Premium Dual Monitor Stand- $190
AmazonBasics 7 Port USB 3.0 Hub with 12V/3A Power Adapter- $27
AmazonBasics 4 Port USB 3.0 Hub with 5V/2.5A power adapter- $17
These bad boys right here :)
Rustark 50Pcs 2 Sizes Adjustable... https://www.amazon.com/dp/B071RGCJLT?ref=ppx_pop_mob_ap_share
I personally reuse the little ties that come with the cables I purchase. These would be a great investment too though.
SunplusTrade 100pcs 11.8 Inches Stainless Steel Exhaust Wrap Multi-Purpose Locking Cable Metal Zip Ties https://www.amazon.com/dp/B072WC1MXT/ref=cm_sw_r_cp_api_M9I5Bb7KS6JAF
Zip tie a shopping cart to each handle
There are stainless steel zip ties. Would these work for you?
SunplusTrade 100pcs 11.8 Inches Stainless Steel Exhaust Wrap Multi-Purpose Locking Cable Metal Zip Ties
SunplusTrade 100pcs 11.8 Inches Stainless Steel Exhaust Wrap Multi-Purpose Locking Cable Metal Zip Ties
https://www.amazon.com/dp/B072WC1MXT/ref=cm_sw_r_cp_apa_16BQBb75ZYW80
In case they have knives! Hopefully they won't have wire cutters or something.
Tape or screw the power strip to the bottom of the desk and add cable trays (I have these) to the bottom of the desk so you have somewhere to tuck any extra length. Use cable clips of some sort (like these or these or these) to keep cable runs tidy and in place. If you have cables that you need to bundle together or keep folded, use reusable cable ties like this and avoid using zip ties since they're single-use and can damage cables if they're over-tightened.
If you have cables that you might want to remove from time to time, like for peripherals, then you should avoid bundling them with everything else. Might seem obvious, but I thought I'd throw it out there since I've made that mistake before with my keyboard and mouse.
Hope this helps.
You might look into adhesive plates for the pictured velcro wraps (like these).
Failing that, I'd use one of the following:
an adhesive wrap:
https://www.amazon.com/dp/B075Y9J42T
Or an adhesive clip:
https://www.amazon.com/dp/B00U32M8CI
I say manage everything on top. I use these for under-desk management LINK but I imagine top would be similar. Run as much as you can along the back wall of the workstation and maybe try to pick up a piece of trim or something to hide it.
These are the ones i used. I used some 3m tape as well to stick down the ends so they dont stick out.
I use these for cable management and they work great!
Love the way they work because if I need to add, move, or change cables, I can do so easily thanks to the adjustable clip.
Also if you need to remove them, they come off fairly easy and don't leave marks on the desk.
https://www.amazon.com/50pcs-Adhesive-Adjustable-Optional-Management/dp/B075Y9J42T/ref=mp_s_a_1_5?crid=AW7A51XXD34Y&keywords=adhesive+cable+clips&qid=1554302862&s=gateway&sprefix=adhesive+ca&sr=8-5
Not sure, new to building and cable management myself. Google "zip tie mounts", those seemed to help me. Only $8 for 100.
EDIT: [Here they are.] (http://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE)
Getting some cable tie mounts definitely helps with the zip ties, if you need to route them a certain way.
I use these and some zip ties leftover from cable management as a DIY bungee.
You made this more complicated than it needed to be OP. Just use springs. Thread the cord through a keyring, that is attached to an extension spring, that is anchored near the bottom of the dresser. Have cable mounts near where the cable plugs into your hub/outlet so that it doesn't pull the cable out, or put tension on the outlets, and you're good to go.
Really, you could probably get away with just weighted rings, or several rings on the cord that naturally weight it down, but slide along as you pull it. May get tangled or snag though.
If you're worried about tangling put each spring and cord through their own tube (like a paper towel tube, or PVC) that's mounted at the bottom. It'll pull each cord down through it's own tube.
Your holder/stopper solution for keepign the cord from falling behind the table is perfect though, keep using that.
These cable tie mounts work pretty good for things like this, just stick under the cabinets and zip-tie them up.
Something like this will resolve your problem. Although a bit of a pain when you add a cable to need to adjust since they only work with cable ties...
https://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE/ref=pd_ybh_a_10?_encoding=UTF8&psc=1&refRID=0PE9781TTEZ6W8FHWN13
Edit: Words are hard
That's a cable tie mount, and it shouldn't be there, but you might not want to take it out. It might've just fallen in there by mistake, but it might have been jammed in there to keep something from moving/bending. Ask your friend if he knows why it's there.
Yeah somebody else suggested that. Something like https://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE should work nicely.
I've never seen them in a panel before but I can't find anything in the code that says they're not allowed, and I've seen them in industrial installations...
Yeah that should work no problem.
Self-adhesive ziptie mounts, just run them along your planned cable routing every couple of feet and tie down the cables with zipties, no need for nails.
Nope! You can buy them on Amazon for cheap though:
http://www.amazon.com/Cables-43036-Cable-Ties-4-inch/dp/B0002GX1XA/ref=sr_1_3?ie=UTF8&qid=1377822338&sr=8-3&keywords=Cable+Ties
http://www.amazon.com/Startech-HC102-Adhesive-Cable-Mounts/dp/B00008VFBE/ref=sr_1_1?ie=UTF8&qid=1377822347&sr=8-1&keywords=Cable+Tie+Mount
Something like this with a zip tie?
That doesn't look too bad already! You should get some cable tie anchors to align the cables better. I used some cable hooks in the old case as seen here for the SATA cables as it was the only thing I had at the time.
I know everybody here gave you a hard time about the cable management... get some zip ties and some of these: http://smile.amazon.com/gp/product/B00008VFBE?keywords=adhesive%20zip%20tie%20mount&qid=1450045130&ref_=sr_1_3&sr=8-3
They would be put along the back edges of your shelves. They hold the zip ties in place, then you run the wires through the loose zip ties and then tighten everything down once it looks good.
Seriously spend some time on cable management and it will be night and day different. Post some "after" pics!
Zip ties are attached to these.
These.
I wanted to use some small zip ties (kinda like these) and thread them through the vents on the back of the TV to "hook" the lightstrip. Turns out my vents are too small/close together.
I just ended up using masking tape. Looks terrible but it's in the back so I never see it.
Don't believe the price on their website, by the way. It's like $25 bucks on Amazon.
Grab that box, and get yourself some:
...and you're golden. My entertainment center is super tidy.
Hey man. It really doesn't take much. :)
Just order a pack of 8" zip ties from Amazon (about $3) and some Velcro strips for $5. Just bundling your cables together goes a LONG way.
But don't worry. If you still want to be on /r/shittybattlestations even after your cables look all nice, you can just mount your hard drives by duct taping the shit out of them to your case. A shittybattlestations masterpiece!
VELCRO Brand One Wrap Thin Ties, Black & Gray, 8 x 1/2-Inch, 50 Count (90924) https://www.amazon.com/dp/B000F5K82A/ref=cm_sw_r_cp_apa_k0LZzbYE7WKZG
C2G/Cables to Go 43036 4-Inch Cable Ties - 100 Pack (Black) https://www.amazon.com/dp/B0002GX1XA/ref=cm_sw_r_cp_apa_L1LZzbMJSWCN0
Cheapest bank robber around
http://www.amazon.com/Cables-43036-Cable-Ties-4-inch/dp/B0002GX1XA
Here is a link for 100 for $3.62 and is a list to some more options.
Then for the cable ties here are some more.
This was a quick search. Hope it helps.
All of the below. Additionally they are all fantastic for cable management in your computer!
Cable ties 4 inch
Cable ties variety
Cable tie mounts
Velcro strips
I use Philips SHP9500S, very light and open back headphones with a V-MODA BoomPro for the mic. As for the cord just use a VELCRO tie
Velcro is your friend.
For long-term storage, I like to use a small piece of single-strand wire (eg, from cat5) to tie around the loop. Which is made over-under, always, because hands never forget, even when the cable is 6 feet long.
For short-term storage, I like a velcro-ish variant.
Can you use velcro ties?
Pics. We have literally no idea about the layout.
You generally use zip ties and velcro bands to hold the cables down. You probably need some glue-on mounting points since it's a wood case, and holes won't look very good.
What /u/Cloo159 said...
>Put this under your desk, best $10 you can spend on cable management.
or these with zip ties
http://www.amazon.com/Ziotek-Zip-Tie-Mount-Pack/dp/B000BSJHLE.
I like the flexibility of the zip tie mounts. You can get very creative
You have the following options.
A. Conceal
You have open backed shelving. Add a backing (posterboard, painted MDF / fiberboard, fabric, etc... attached to the back of the shelf) and cut / drill pass through holes near the location of each shelf to pass the cables through.
B. Cable Management
Use the following very inexpensive products (which are also available at Home Depot / Lowes) to route / organize the cables along the back of the shelves and vertical portions. You should choose the color based on the color of the cables and what is being mounted to. In this case, I would use black.
C. Both A and B
See above.
I use this inside my case. It comes with mounting hardware making it really easy to route however you want. It also has 3 brightness levels and an on/off switch.
For backlighting behind my monitors/desk, I use something like this. I typically only use a single color, but I opted for a version with color changing LEDs. The adhesive on these things sucks, so if you purchase one, I suggest getting some of these and some zipties to mount it.
I have that same desk! The keyboard tray sucks and it also scratches easily.
I have my wires twist tied to the back using plastic tie mounts right along the top section. It makes it look a lot nicer, for like 3 bucks!
Its a stick on ziptie anchor, you can get those at home depot or here http://www.amazon.com/Ziotek-Zip-Tie-Mount-Pack/dp/B000BSJHLE/ref=sr_1_3?ie=UTF8&qid=1421853241&sr=8-3&keywords=zip+tie+anchor
[Cable/zip tie mounts] (https://www.amazon.com/Zip-Tie-Mount-25-Pack/dp/B000BSJHLE). You can find them lots of places, I got a pack of a hundred of them and a pack of a hundred zip ties for about 10$. You can get ones with screw holes or adhesive. The adhesive ones works great.
Post you're build on /r/CableManagement they will help you out and probably tell you how to fix it, also theres alot of info in the subreddit and it's a nice community!
What case do you have?
Also you should know these exist: http://www.amazon.com/Ziotek-Zip-Tie-Mount-Pack/dp/B000BSJHLE
http://www.amazon.com/Ziotek-Zip-Tie-Mount-Pack/dp/B000BSJHLE
Sure thing
I have always enjoyed velcro cable ties. They can be found at your local office supply store and come in a few different colors including black. The best part about them is their reusable unlike zip ties after you cut them.
I use:
Velcro ties:
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Multi-color/dp/B00144CABS/ref=sr_1_56?s=hi&ie=UTF8&qid=1485385294&sr=1-56&keywords=cable+management
Mini-rack under my desk:
https://www.amazon.com/Northland-Online-CT9414-Cable-Organizer/dp/B01C3DY8I6/ref=pd_sim_23_2?_encoding=UTF8&psc=1&refRID=7Y37D2Y83EPD8FR3ZVRE
Get the stainless steel, no doubt about it, and also definitely do forward sealing. You may want to consider flow control, but that is a bit more of a personal preference. I really like my intertaps, and really like the ball lock adapter, makes bottling from a keg really easy using a DIY picnic tap poor mans beer gun. This also works for growlers, just need a larger bung.
Some things I appreciate in my build:
I haven't found too many things I wish I did differently, but I'm still learning all the right procedures. I would recommend buying a both liquid and gas line in bulk, it's nice to be able to replace and not worry about if you have it.
Sure. 90% of it was putting an Ikea Signum underneath the desk towards the back to carry all the cables. http://www.ikea.com/au/en/catalog/products/10200254/
I also used some 3M dual lock Velcro to stick the powerboard to the underside of the desk, up off the floor. https://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK1AK
Finally, I used a number of small Velcro cable ties, kind of like these, to keep cables together. https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Multi-color/dp/B00144CABS
You can bundle them up with something like this: https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1485542407&sr=8-1-spons&keywords=velcro&psc=1
Aside from that you can put them into a bin or box whatever you want.
I use this velcro in my rack and it's perfect.
you can use VELCRO for cable management: Here
About the mount, I'm currently using flexispot monitor arm
Those actually tend to be more expensive than velcro, believe it or not. Velcro is only $7 for 100.
I prefer velcro. These things are great and cheap.
I don't think anything is holding it. I think it's just a velcro strap. they're amazing for cleaning up cables or making transportation easier.
Yeah, velcro strips or zip ties are a good idea. I don't know how many fans that case has, but a fan spllitter would be nice because I know that mobo only has 1 sysfan header.
The power supply and motherboard should have all the other cables you need. And that 1060 does have HDMI out so if you have a cord you're good.
These are basically velcro zip ties. You can wrap your cables with them and end up with a few thick, neatly wrapped cables that you can then route wherever you need to keep them looking neat and out of the way. You can also install hooks or something to hold the wrapped cables up underneath your desk so that they don't dangle.
I use this, mounted to the rear of my desk, to handle cables that run the length of the table top. Cables all exit on the right side of the desk and run down one leg:
http://www.amazon.com/Channel-Cable-Raceway-Black-Length/dp/B002DNM42O
I use this to handle cables that run across my floor (live in apartment, can't build them into the wall):
http://www.amazon.com/Rubber-Duct-Floor-Cord-Cover/dp/B00EJO0A1C
I used this to wrap/bundle my cables when they are too long:
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6
For those who are curious :
Amazon Links to the Cable Management stuff:
Cable Management Raceway
Velcro Strips
And then I just grabbed some 3M double sided adhesive for my power bricks and such
PCPartPicker part list / Price breakdown by merchant
Type|Item|Price
:----|:----|:----
CPU | Intel Core i5-4690K 3.5GHz Quad-Core Processor | $241.98 @ Newegg
CPU Cooler | Corsair H110i GTX 104.7 CFM Liquid CPU Cooler | $99.99 @ Newegg
Motherboard | MSI Z97S SLI Krait Edition ATX LGA1150 Motherboard | $92.98 @ Newegg
Memory | Corsair Vengeance 8GB (2 x 4GB) DDR3-1600 Memory | $36.99 @ Amazon
Storage | Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive | $49.98 @ NCIX US
Storage | Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive | $49.98 @ NCIX US
Video Card | EVGA GeForce GTX 970 4GB FTW ACX 2.0 Video Card | $313.98 @ Newegg
Case | Fractal Design Define S w/Window ATX Mid Tower Case | $79.99 @ Newegg
Power Supply | EVGA SuperNOVA GS 650W 80+ Gold Certified Fully-Modular ATX Power Supply | $79.99 @ Amazon
Operating System | Microsoft Windows 10 Home OEM 64-bit | $84.99 @ NCIX US
Monitor | Samsung S24D300H 24.0" 60Hz Monitor | $180.98 @ Newegg
Keyboard | Corsair STRAFE RGB Wired Gaming Keyboard | $144.99 @ Amazon
Mouse | Logitech G402 Wired Optical Mouse | $44.76 @ Amazon
Headphones | Audio-Technica M50x Headphones | $119.99 @ Micro Center
| Prices include shipping, taxes, rebates, and discounts |
| Total (before mail-in rebates) | $1663.57
| Mail-in rebates | -$50.00
| Total | $1613.57
| Generated by PCPartPicker 2016-06-08 00:31 EDT-0400 |
dam right they are. If anyone cares here are the velcro ties I used: http://www.amazon.ca/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_1?s=office&ie=UTF8&qid=1410121439&sr=1-1&keywords=Velcro+Reusable+Self-Gripping+Cable+Ties%2C+0.5+Inches+x+8+Inches+Long%2C+Black%2C+100+Ties+per+Pack+91140
Those are exactly the ones I use. Excellent choice. US Amazon link
Velcro ties good too.
That's why you use these:
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/
I have bundles of those things all over my house and office.
Looks nice, but, Good Lord, buy some zip tie things. https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/ref=sr_1_2?ie=UTF8&qid=1469695660&sr=8-2&keywords=velcro+ties
I used 3 things to manage cables.
Adjustable Cable Clips, Self-Adhesive Nylon Wire Clamps, Plastic Cable Organizer Holder Management System, Pack of 50, Black https://www.amazon.com/dp/B01NGTPP5F/ref=cm_sw_r_cp_apa_i_KIOxDb996S8QV
Scotch Indoor Mounting Tape, Holds up to 6 pounds, 1x1 inch, 48 squares https://www.amazon.com/dp/B000KKPHZ8/ref=cm_sw_r_cp_apa_i_hJOxDbF79VVGN
VELCRO Brand ONE WRAP Thin Ties | Strong & Reusable | Perfect for Fastening Wires & Organizing Cords | Black, 8 x 1/2-Inch | 100 Count https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_i_XJOxDbGNY0Q25
Using like 50 of the clips and a lot of the velcro and some double sided tape for heavier things like hdmi matrix and audio mixer and power strips it is all mounted on the underside of my table. It is a lot of work and there is a lot to manage but you find a way to make it work.
Dear giantentlepanda:
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6
Really, do
Oooooh great idea, shopping for them now...
Edit: ordered this: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1398065292&sr=8-1&keywords=Velcro+straps
You should have come to a compromise. http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1396485912&sr=8-1&keywords=cable+ties
You should get these little velcro cable ties. I recently started using them because the back of my computer desk was littered with 6 ft cables that I only needed 2 ft of. I folded up all the extra slack in my cables like this and used the velcro to ensure that they don't come undone. It's trivial to do, and it will clean up that clutter nicely.
I usually drop the mobo/cpu/cooler/ram in, then the power supply and run everything through the back. Once I have everything hooked up neatly, I start working on my HDDs and their cable management. Finally any lights, fans etc. Also these are fantastic.
Interesting! I've been using their cable-tie product, but one of my complaints about it is that it is a little too grippy. Plus, the fixed 8-inch length is a bit much for most of my cables, whereas the plant ties come in a roll that requires you to cut off exactly however much you need.
This version of the plant-tie product includes a built-in cutter in the package (according to the description), so that may be preferable for those who don't want to keep a pair of scissors next to their cable ties.
I used this for my stick. http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6
Cant really see much in your tiny pictures but velcro cable ties work well to organize cables.
Maybe try these?
Working through the album (I'll add links progressively, just want to get most of it written out):
Pockets:
The bag: The bag mostly goes from my car to under the desk to the work truck if we need to visit a transmitter site. That can be somewhat unpredictable hence some of the supplies.
Left to right, top down.
All neatly packed away in a Midway Compact Comp Range Bag
ಠ_ಠ
You should invest in some of these: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6
I recently purchased one of these after starting a major reorganization and cable management effort. It worked so well for my desk, that I just ordered a second one for my TV setup.
Also, these and some of this (shorter amounts are also available).
I hope to post pictures of the newly (still in progress) organized Office and Entertainment areas soon.
Velcro cable ties.
I just used the 25mm version, bought these velcro straps
https://smile.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1468163467&sr=8-3&keywords=velcro+strap
cut them in half down the middle, fed them through the tie-down holes, and then made a loop to run a number of cables through. So far it has held up 4 cat6 cables without peeling off the wall, but it would be easy to drill a small screw through it into the drywall if necessary.
I like to use the Velcro brand cable ties.
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6
You can get them at Amazon, Home Depot, Wal-Mart (I think?).
If you ever have to replace the cables, try these instead of zip ties. :)
Desk looks super awesome. I'm going to be setting up a new desk once we move, and now I'm inspired.
Awesome build man! One thing you are lacking is cable management! But that isn't a big deal but if you want to take it to the next level of pretty come over to /r/CableManagement . Those guys there know there shit and are very helpful!
I personally would recommend some zip ties, twisty ties, and some velcro! Velcro is the shit.
For bigger wires these worked great for me. A bit pricey but they are wonderful.
http://www.amazon.com/ColorYourLife-Reusable-Fastening-Microfiber-Packaging/dp/B00CI5YW4U/ref=pd_ys_sf_s_rp_a1_2_p?ie=UTF8&refRID=0CKBF12EX0GRNFPZWYYH
Smaller things I usually go with this.
http://www.amazon.com/gp/product/B00GRTHEYI/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_1?s=office-products&ie=UTF8&qid=1409399401&sr=1-1&keywords=zip+ties
Zip Ties
http://www.amazon.com/gp/product/B005OK7P3G/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
http://www.amazon.com/TEKTON-6233-Cable-Ties-500-Piece/dp/B000NPZ4D0/ref=pd_rhf_gw_s_cp_31_AGK5?ie=UTF8&refRID=1KER4A54A5HGWD1C6GC6
The amount of velcro straps heavily depends on how you care about so I cant tell you for sure. But this is plenty. http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_2?ie=UTF8&qid=1408749288&sr=8-2&keywords=velcro+straps
100 for $6
If you bought the H7 like your previous posts indicate it comes with thermal paste so you should be okay there. These might be handy for cable management but it's up to you.
Ok So what you want is some self-adhesive zip tie mounts - something like this
https://www.amazon.com/Install-Bay-CTM34-Adhesive-Backed/dp/B001JT5S7Q/ref=sr_1_3?ie=UTF8&qid=1474553181&sr=8-3&keywords=zip+tie+mounts
and then zip tie the power strip down. you probably don't want to put self adhesive strips directly on the power strip because heat could loosen the adhesive and let it fall down.
also
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/ref=sr_1_2?ie=UTF8&qid=1474553348&sr=8-2&keywords=velcro+straps
these things are a godsend for cable management
edit: also looking at your picture, your desk has that built in cable management bar, you may be able to just get some long zip cords or use those velcro straps to attach it directly to that bar. those zip tie mounts may just be a little too weak (probably not..but maybe) and that would be a more sturdy solution
OP (and others), try these, they're fantastic for cable management. I've always got a bunch kicking around at home and the office too, they're amazingly useful.
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Self-Gripping/dp/B001E1Y5O6/
I just adjusted the way I'm doing but and it's the best so far. Using a Velcro cable tie like this:
https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_i_JXAhDb9P486Y9
Wrap it around the cable and loop the Velcro through the slot so you can have a set size that is a little larger than the cable. Now gently detach the foam on the back of the halo so you can get to the left of the knob (looking at it from the back. Wrap the Velcro around here in the flat spot between the plastic hooks that the foam uses. Make this a little snug, but don't crank it down. This is just to keep the cable floating there, but it can easily slide back and forth. Reattach the foam and it almost a factory look that works MUCH better.
Ever play Hogans Alley? https://en.wikipedia.org/wiki/Hogan%27s_Alley_(video_game)
Could make a mock up of it with cardboard and wooden dowels at one end of a room. Have some kids make the silhouettes rotate and some of them get to shoot for x amount of time while you keep score. Then have the groups switch out. Could even do it around 3 sides of a room. If you cover the targets in felt the dart tag dart suggestion someone else made would let the darts stick to the targets.
In lieu of dart tag darts you could also glue a tiny bit of
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1517918320&sr=8-3&keywords=hook+and+loop+cable+ties
to the end of regular streamline darts.
Of course I have Choogles, we gotta hang more often sir.
That's a solid looking build my friend, only thing I would add is some velcro cable ties to make all the cable management WAY smoother and less permanent than standard zip ties.
There's an easy solution here
Price History
ReviewMeta: ★★★★✮ 4.7/5 from 7207 valid reviews
CamelCamelCamel - [Info] │ Keepa - [Info]
_
Always check the prices. The savings can be Knight and day.
^(Info) ^| ^(Developer) ^| ^(Inquiries) ^| ^(Support Me!) ^| **[^(Report Bug)](/message/compose?to=The_White_Light&subject=Bug+Report&message=%2Fr%2Fbapcsalescanada%2Fcomments%2Fd3jmmm%2Fprimecables_free_shipping_end_ofsummer%2Ff052lrz%2F%0D%0A%0D%0A%0D%0A%0D%0APlease+explain+here+what+you+expected+to+happen%2Fwhat+went+wrong.)**
zip ties are a little too permanent for my tastes, I love these wire wraps:
https://smile.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1494680682&sr=8-1&keywords=velcro+wire+ties
Everytime I see the cranked down zip ties, I feel the need to point out these. Works way better than zip ties.
you need this. http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6/ref=sr_1_1?s=office-products&ie=UTF8&qid=1415853049&sr=1-1&keywords=VELCRO+Brand+-+ONE-WRAP+Thin+Self-Gripping+Cable+Ties%3A+Reusable%2C+Light+Duty+-+8%22+x+1%2F2%22+Ties%2C+100+Pack+-+Black
Ended up researching into a bag and eventually found one I think will work well.
I will link to everything I've found on amazon. I have found others on our distributors website. Hopefully this will help others put together something as well!
Bag
SATA Adapter
Toolkit
Toner/Fox and Hound
Small LED Flashlight
Velcro Wire Ties - Zip ties are awful
Network Kit
External HDD
Analog Phone - For testing Fax Lines mainly
There's more, such as cables and things, but everyone should be OK with figuring that out for yourselves. Total the kit (with cables and stuff included) is only about $370.91 per technician.
Hope this helps someone!
these things saved my life
Honestly looks great. I think the only thing that could be done better is cable management. Buy some of these and bundle the cables coming off the back of the tower. Small hole under your mouse pad to route the kb/m cables under the desk. Put a small hole behind the shelf to route those power cables from behind the desk. Honestly I feel like I'm just nitpicking because this looks great.
To add onto this, I would wrap all your cables individually in these velcro cable ties:
https://www.amazon.com/dp/B001E1Y5O6/
It takes a bit of time at first, but once you're done, it's so useful. A giant jumbled rat's nest of cables turned into a neat tiny pile of units.
Quickly grabbing the cable I needed and using it was so easy. I didn't need to sort through the rat's nest anymore and spend 5 minutes untangling the one cable I needed from the rest of the nest.
I usually go the painters tape and sharpie route but I wanted to also make another suggestion/word of caution... don't use zip ties for cable management while you're back there. If you're anything like me where there's a rotation of components for whatever reason it's a pain to have to snip those and replace them. Get these Velcro ties instead.
Edit: words.
Get a roll of these velcro ties and never have that problem again. https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_Ln6ZBbXX90FJH
As for keeping the wires clean I used these
Adhesive Cable Clips - 1" 0.75"... https://www.amazon.com/dp/B074NRGR65?ref=yo_pop_ma_swf
VELCRO Brand One Wrap Thin Ties,... https://www.amazon.com/dp/B001E1Y5O6?ref=yo_pop_ma_swf
I originally thought about using zip ties but they’re a pain in the ass if you want to remove a specific cable and the adhesive cable clips come in handy if you want to tuck the wires hidden under the pedal tray.
No, what you need is either double-sided Velcro tape or Velcro ties.
Anything else is an abomination.
Just in case anyone comes across this thread with a similar problem, here's how I eventually solved it:
I used these velcro straps that are designed for holding cables together. I wrapped one around my belt, then added a second one behind it that wrapped around to go around the gun barrel. Wrapping the belt first anchors the velcro strap so that it doesn't slide around all willy-nilly.
Nope thermal paste comes pre-applied on the stock cooler and included with the Noctua cooler. All the necessary cables should be included, all you should need is a screwdriver. I would still recommend some cable ties and self fastening velcro ties like these to clean up the cables both inside and outside your case.
Here's an alternate storage configuration. I'd recommend 256gb for the operating system, your programs, and peace of mind that you won't have to spend time micromanaging files and that your system will still run fast.
I haven't made this build myself, but the site, PCPartPicker itself checks for compatibility, so you can't add a part that won't fit with the rest of the build. Everything is compatible.
PCPartPicker part list / Price breakdown by merchant
Type|Item|Price
:----|:----|:----
CPU | Intel Core i5-4690K 3.5GHz Quad-Core Processor | $229.98 @ OutletPC
CPU Cooler | Noctua NH-D14 65.0 CFM CPU Cooler | $69.98 @ OutletPC
Motherboard | Gigabyte GA-Z97X-SLI ATX LGA1150 Motherboard | $107.93 @ OutletPC
Memory | G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory | $70.99 @ Newegg
Storage | Crucial MX100 256GB 2.5" Solid State Drive | $109.97 @ SuperBiiz
Storage | Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive | $53.98 @ OutletPC
Video Card | Gigabyte GeForce GTX 970 4GB WINDFORCE Video Card | $368.99 @ NCIX US
Case | NZXT H440 (Black/Red) ATX Mid Tower Case | $109.99 @ Micro Center
Power Supply | EVGA SuperNOVA NEX 750W 80+ Gold Certified Fully-Modular ATX Power Supply | $59.99 @ Newegg
Operating System | Microsoft Windows 8.1 (OEM) (64-bit) | $89.98 @ OutletPC
| | Total
| Prices include shipping, taxes, and discounts when available | $1271.78
| Generated by PCPartPicker 2014-10-23 21:55 EDT-0400 |
Get these, call it a day. They've been great everywhere.
NavePoint Cantilever Server Shelf Vented Shelves Rack Mount 19" 1U Black 10" (250mm) deep https://www.amazon.com/dp/B008LUW49G/ref=cm_sw_r_cp_api_nXb9BbQ2ZKE7R
I used this one for my modem and small stuff. It’s less expensive and has edges that are rolled up to keep stuff on the shelf. I don’t have any of the larger shelves because all of the big stuff is rail mounted. But the modem is on a small shelf. There are a bunch of different sizes.
One thing to keep in mind when looking at stuff is the specs online for how deep things are does not include the amount of depth that cables like the power cable adds to the back.
Also, if you have dell sliding rails, consider the cable management arm. It’s really nice to have to keep cables organized and keep them from ripping out of the back when you slide the server out.
It has sideways cuts in the bottom for airflow. I used Velcro cable ties to keep stuff in place. I attached multiple cable ties together and down through the shelf holes.
VELCRO Brand ONE WRAP Thin Ties | Strong & Reusable | Perfect for Fastening Wires & Organizing Cords | Black, 8 x 1/2-Inch | 100 Count https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_nYb9Bb1E6D6EM
Honestly I'm not sure. OP could make his setup 95% neater with half-a-dozen velcro cable ties like these.
Personally, I do just enough so that I don't get my foot caught in dangling cables, but then my setup is completely not photogenic
Step 1
I use these: https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
My first desk was the Ikea Micke Corner Workstation. Got rid of it just because I wanted something bigger, and not in a corner. I had this with a H400 case sitting on the top and running the cables down the back. Sorry, don't have pictures of that but it was nice.
I'm a firm believer that any desk can have cable management. I use these cable ties and probably redo my cables every 6 months or so. Or there's plenty of other cable loom options out there. Just plan ahead and take your time.
Get some of these and some zip ties and adhesive hooks and you'll be golden.
Here's what I'm going to do..Amazon 10ft USB 2.0 extension cable. Just bundle this extension cable in with the other three wires going up to the headset, I highly suggest using either Electrical tape to bundle all the wires tightly together or Velcro Cable Organizers every foot or less to keep the bundle of wires tight.. You can then plug your 3m Gamescom 780 cable there and have it all flow beind your back, instead of flopping around at your side or in front of you.
The extension cable just plugs into one of your USB ports on the computer (not the breakout box) and allows the headset to be used without having to use the passthrough.
http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6
5 bucks, man.
Velcro cable ties.
Set aside an evening, put on a podcast or audiobook, and go through everything. Wind it exactly how you want it then slap one or two cable ties on it and put it in a box if it's loose or tuck it behind somewhere if it's live.
I have a lot of loose odds and ends for computer stuff and I fought with spagettification for years until I got a hold of the Velcro ties.
How about something like this?
https://www.amazon.com/gp/product/B001E1Y5O6/ref=s9_acsd_top_hd_bw_b7B8gd1_c_x_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-3&pf_rd_r=GH6JYBFK49PX4CPAJHMC&pf_rd_t=101&pf_rd_p=c2111f9c-f2eb-584f-a680-0773815e98b2&pf_rd_i=6577540011
I use something like this, but I can only have my m/kb cords in them since it's kinda small.
https://www.amazon.com/Cable-Zipper-Extension-Storage-Organizer/dp/B000PZU26C/ref=sr_1_24?s=office-products&ie=UTF8&qid=1499803904&sr=1-24&keywords=cable+organizer
Those are interesting, I usually use the velcro ones, like these: https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ref=sr_1_3?s=electronics&ie=UTF8&qid=1537897763&
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
(Ikea Signum)https://www.amazon.com/IKEA-SIGNUM-management-horizontal-silver/dp/9178905931/ref=sr_1_2?ie=UTF8&qid=1536295487&sr=8-2&keywords=ikea+signum+rack
(Velcro cable straps)https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6/ref=sr_1_6?s=office-products&ie=UTF8&qid=1536295526&sr=1-6&keywords=cable+management
You probably will not be able to get the nice cable clips, but there are velcros out there...
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
The S340 elite offers some nice cable clips...
Command cable clips and Velcro cable ties will go a long way.
So I don't have nearly as much stuff as you do but here's what I did with my wires.
You can see my management here
http://m.imgur.com/a/5PUM7
I bought these cable clips
https://www.amazon.com/dp/B01BB2YTU2/ref=cm_sw_r_cp_api_9Jc8yb49NGARY
And these Velcro ties https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_wKc8ybN3KZVBF
You could try something similar!
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_dfz6ybY3D4TKE
It's cheaper to buy precut in reality.
Don't wind your cables like that !! D:
Get these - https://www.amazon.com/dp/B00IZ46RTG/ref=cm_sw_r_awd_XVBOub1GJCJ0M
Our these - https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_awd_BWBOub0QNP04V
Your controllers will look better, last last longer
Yep! OP, these are what I use. Works a treat.
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1418929961&sr=8-1&keywords=velcro+ties
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1418750024&sr=8-1&keywords=velcro+ties
Really nice write up and process. The only thing I would change is to not use zip ties. It's really hard on the wires and just harder to upgrade parts in the future. I would recommend Velcro ties instead. They hold up well enough for a computer and make things so much easier to take apart in the future for upgrades. It also reduces the risk of cutting into the wires with wire cutters when the zip ties are needed to come off. Plus, Velcro ties are reusable.
I use this thing https://www.amazon.com/Ikea-Kallax-Bookcase-Shelving-Display/dp/B0091V8NTE?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-d-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B0091V8NTE
One cube for each generation of console controller. I use these to tie up the controllers https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_2?ie=UTF8&qid=1496106918&sr=8-2&keywords=velcro+ties
But what if I want to move it? Those things aren't cheap (okay, the ones that you linked to are actually really cheap, but I haven't seen them in Canada that cheap - example).
Also, even with that, still too bulky for me haha
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6
http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&qid=1421726790&sr=8-3&keywords=velcro+strap
FIX YOUR SHIT CUZ
My apartment has pretty terrible lighting and with fall/winter coming on strong in the Boston area, I decided to put together a little home gardening station to help with lighting and movement of the plants for watering. I went into this with the goal of having my setup accommodate most of my small collection of plants and to allow for easy movement without having to mess with the grow lights. In the end, I decided on a cart-based design composed of the following items:
Bror Utility Cart 33 ½” X 21 ⅝” X 34 ⅝” ($99)
https://www.ikea.com/us/en/p/bror-utility-cart-black-pine-plywood-60333850/
Bror Add-on Shelf 21 ⅝” X 6 ¼” X 5 ½” ($10)
https://www.ikea.com/us/en/p/bror-add-on-shelf-black-20402001/
Koppla 3 Outlet Power Strip 19 ¾” ($4.99 for two pack)
https://www.ikea.com/us/en/p/koppla-3-outlet-power-strip-grounded-white-00086428/
2x Hemma Cord Set, Black 15’ 5” ($7.00 each)
https://www.ikea.com/us/en/p/hemma-cord-set-white-10175810/
(IKEA site only has white showing up now, black was available in-store)
2x Luftmassa Lamp Shade 10” ($17.99 each)
https://www.ikea.com/us/en/p/luftmassa-lamp-shade-rounded-70462648/
Kasa Smart WiFi Plug Mini HS105 ($21.75)
https://www.amazon.com/gp/product/B01K1JVZOE/
Relassy 20 Watt Dual Head, Gooseneck, Full Spectrum Grow Lamp ($27.39)
https://www.amazon.com/gp/product/B07C68N7PC/
2x GE 9 Watt BR30 Balanced Full Spectrum Bulbs ($9.98 each)
https://www.amazon.com/dp/B07NN6SVG6/
4x 3M Command Utility Hooks 3 lbs ($8.99 for nine)
https://www.amazon.com/gp/product/B0751RPD3V/
2x Velcro Thin Ties 8” X ½” ($9.70 for 100)
https://www.amazon.com/gp/product/B001E1Y5O6/
Total Cost (pre-tax): $234.76
My issue was the tubing would snag on stuff when I moved around in the bed. My solution was to get some cheap velcro cable ties and ID clips
to attach the tubing to my shirt so it moves with me.
If you want the desks to be facing each other, this is how I would recommend setting the desks up:
http://imgur.com/a/PUdKO
Once you do that, you have some degree of play on how close the desks are and how much room you have between your backs' and the walls of the room. That's going to boil down to preference and feel, but depending on how much space you have between the desks and how much you need to access your cables, you could do some pretty creative things to disguise the cable clutter.
A cheap sheet of material and some basic tools, like Plywood and drills/saws or foam core and a sharp utility knife can partition off the cables so you aren't always looking at them when you're looking past the desk. There's also all sorts of wire management options like bluelounge's "nicer" options or just simple velcro wraps. If you want to add some light and customization to the room, LED strips are super popular with regards to the gaming aesthetic and they're fairly inexpensive and usually have easy instalation. (Adhesive, normally.)
As far as decor is concerned, you have lots of options, really. You could have separate rugs for you and your partner's sitting areas, or you could have a rug under both of the desks, or utilize the other half of the room for something else and visually separate it with a rug. Another thing you could use to visually separate the room is some kind of open, free-standing shelf. I'm separating my bedroom (bed from computer/desk area) with this kind of shelving which is pretty 'rugged', 'industrial', or I guess 'masculine', but I like how they look in my space. I had to do some digging but I was able to find some shelves that were 72" by 48" (14" deep) at Walmart for under $100, I got two of them.
It's hard for me to make any specific suggestions about anything else without actually seeing the room (or your desks/gaming setups, etc!) and having a feel for it.
First, buy velcro cable ties like this and use them to fold the wires to their shortest. You probably want the large wire bundle end to be at the back of your PC or TV. Then get a cable hiding box like this to hide the strip. Toss the router in a basket with a lid and you should be set (get a plastic one if you're worried about fire).
I'm assuming you mean wires outside the case and not inside.
I picked up a bag of adhesive cable clips for a few bucks. Definitely helpful for routing wires around or under a desk. These are what I bought, but there are lots of different ones you can looks through.
Velcro ties also come in handy frequently and they are adjustable/reusable. You can also use them for cable management inside your case.
I also use Command Strips to position my router and surge protector on the wall, but that's a personal preference.
http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6#
These are my favorite. They fit around each cable individually and even when you don't have them coiled up the Velcro stays on so it's impossible to misplace.
Ascend brothers! No more sticky taped cables or one use zip ties.
If there's little holes in the back of your case then get some of theses:
http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6
I've liked these for light-duty IT and household cable management. They are approx $10 for 100 little 8" velcro straps. So $0.10/ea.
the ones we got from there all went brittle (just a couple months) and now just snap into pieces when you try to use them.
after trying some no-name 'hook and loop' ties that would fall apart (one part was just glued to the other), we now use actual 'velcro' branded cable ties like these. they come in various sizes and colors:
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
VELCRO Brand One Wrap Thin Ties, Black, 8 x 1/2-Inch, 100 Count (91140) https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_em_apa_L-7QAb6DGV2AA
Very satisfying $10.
Super rad looking lights. Hope to see this upclose on the playa!
I've used velcro zip ties with a lot of success. I felt it was my way of minimizing my moop levels while also harnessing the awesome power of velcro.
Sure, most of the cable management I'm doing is just using velcro thin wraps - https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
The tray that is included with the standdesk.co desk is mounted on the frame so it moves with the up/down motion and thus, you only need play for things that move up and down the leg - notably, usb/power/video.
Everything else is routed on the tray and velcro'd down as needed.
There is a power strip mount at the back of the tray which runs the entire length of the desk so things can be directly plugged here, with just the one power cable running down the single leg with play in the length so it can move up and down.
These bad boys have been a lifesaver. Zip ties will work but they're a pain to take off (and they're pretty much one-time use). Velcro wraps have been a godsend.
actually this will be my second build. First build here: https://pcpartpicker.com/b/yPrH99
https://www.reddit.com/r/buildapc/comments/1u4mrq/build_completealmost_just_need_vid_card/
I basically used my whole dining table and put the screws that i needed in specific positions in the table careful not to bump anything.
Also I used these instead of the metal twisty ties: https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_1?ie=UTF8&qid=1480977401&sr=8-1&keywords=VELCRO+Brand+One+Wrap+Thin+Ties
Very helpful and convenient.
By the time you'll need 8GB of VRAM the rx 480 will be obsolete anyways, so don't worry about it. 4GB is much more than almost any modern game requires at 1080p, I am certain you won't have any problems.
I don't know about cable covers, maybe something like home depot? I think velcro strips would do a better job though, you can get them on amazon.
Pretty much exactly describes my bag as well. I also carry around a few different video adapters (VGA->mDP, DVI->HDMI etc, USB video adapter) along with cables and velcro cable ties and a pair of scissors!
Velcro all the things.
Thank you for the information! I'll definitely go with smaller props - although if the bigger ones do happen to fit, would I be fine using those?
I'd really like to go with a taranis, if a sale comes up in the future I'll probably snag one. For now, being a beginner, I'll have to learn to hate the 9x so I can love the taranis - haha.
I do have a bunch (100+) of velcro straps from amazon. Specifically these. They might work out? I might grab a rubberized strap just because they're so cheap anyways.
As for the buzzer - I've seen the HobbyKing™ Lipoly Low Voltage Alarm (2s~4s) posted around, might grab 3 or 4 as you suggested.
Thanks again for the advice - it's very helpful to a noob like myself.
Thought about that. From tome to time me my freinds are making lan parties. Thats why i cant tie everything down with zip ties. But i thought about doing that with the velcro ones. Any thoughts on that?
what i did: get a 3 or 4 ft power strip, like so: http://www.amazon.com/Prime-Wire-Cable-PB800012-12-Outlet/dp/B0027D3LNG
Screw into the rear underside of the desk, or in your desk's case, maybe onto the back near the top.
That would keep all your power cables up off the ground. Liberal application of velcro straps could remedy the rest.
Small velcro straps are pretty useful for cable management around your desk and also in your computer cases.
https://www.amazon.com/dp/B001E1Y5O6/
I wrap them (over-under if they're long) then use those velcro straps to keep them from unraveling - http://www.amazon.com/VELCRO-ONE-WRAP-Self-Gripping-Cable-Reusable/dp/B001E1Y5O6/
They get separated by type (USB, Cat5, audio, video, power etc) and thrown into this style bin - http://www.amazon.com/Sterilite-18828012-through-Aquarium-Latches/dp/B001RCUN9I (I like this range from Sterilite because the lids are thicker than the clear type).
A bunch of manufacturers sell different sizes/styles. Just make sure they're stackable and have a locking lid. I keep these on a long shelf, stacked 3 high in the garage, labeled. I've been in the A/V industry for many years and ended up with tons of cables - data, a/v, power, etc, but this system has kept everything in check and easy to find.
I tend to use these quite a bit to keep cables bundled together. These are good if you need a bundle of cables protected from a chair, walking, animals. I'll then attach the bundled cables to items/table legs/other cables with these
Both of my cats love twist ties and zip ties. They just aren't an option.
My PC case is a server rack case too, so I have a ton of rack cable organization panels on the back of it rack.
Renting definitely limits your options, but there are some things you can do to make things really shine.
I'd avoid zip ties and go with velcro ties like https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
They're a tad more expensive but much easier to work with, both putting them on and off, and you greatly reduce the (small, but real) risk of over-tightening to them to the point of damaging the conductors on cat5/6 cables.
But overall, not bad, especially for a first try.
I'd also watch the minimum bend radius on the cat5 going into the punch down block - it may be fine, but it's hard to tell from this angle. Especially once they're individual strands, it's easy to over-stress the wires and snap them off within the jacket (so you can't tell). Good to see you looped the white cat5 instead of trying to bundle it together tightly into a smaller space (which would bend the cable too sharply).
Yeah, i only buy really good deals on there. Like these cable ties, i just posted. https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_1?s=office-products&ie=UTF8&qid=1503355273&sr=1-1&keywords=VELCRO+Brand+One+Wrap+Thin+Ties%2C+Black%2C+8+x+1%2F2-Inch%2C+100+Count+%2891140%29
> Currently the main coax line goes through the basement direct to the 1st floor wall outlet, then coax to the modem.
I’ve made a drawing of how I understand the internet could go to the splitter, then run again to the 1st floor outlet, then to the modem.
Ideally, you'd have zero interruptions between the coax coming from the street, all the way to the plug on the modem. Since it sounds like the coax enters the walls to the first floor from the basement, just be sure you eliminate any coax splitters by using a barrel adapter
UNLESS you also want a coax drop for Cable TV elsewhere in the house.
Then it's just a matter of making sure you've simplified the circuit to the street using the fewest number of splitters as you can. Each two-way split introduces approximately 3.5dB of loss (a little more than 50%) of power lost. Splitters are also known to be super poorly made and absolutely go bad after a few years of use. You may consider replacing any that you're using. These are decent ones.
> I'm feeling bold
Two of those ethernet strips there in the basement look like basic patch panels. They're just for organizing the cables and don't do any switching, per se. I'd figure out what connections you actually need in the house, beyond maybe a ethernet connection to the modem, the TV and your desktop PC and then go through and eliminate everything else. If you want to double check where the lines are terminated to through the massive web of cables, you can pick up an Ethernet Probe and Test kit to make tracking everything down easier. I'd (ideally) only buy one that has a dedicated ethernet jack and is made by Extech, Fluke, or Klein. As a bonus, It's a handy tool for tracing out ANY sort of wiring, too.
Once you eliminate all the unnecessary stuff, you can start making it look nice. Use some velcro wire ties and bundle everything until it looks respectable. You MAY find that you have odd-length cables used as patch cables between the switch and the patch panel. Don't cut anything, and maybe lay out anything you eliminate by length so you can reuse them if your now-neat-looking bundle could benefit from different-length cables. Don't forget to label everything for clarity using your own philosophy.
> I’m not sure how to use this stuff, if it’s past it’s prime, or if I should even bother. But, If it could be useful I’d like to use it. I just don’t understand it despite reading the sticky’s, etc.
You'll feel a lot more comfortable once you understand what everything is and where it all goes.
All that cable is probably Cat5 or Cat5e at best. If you want to be ready for gigabit speeds in the coming years, you might consider running some new Cat6a or better. I don't know anything about the big switch in the photos, but it's probably doing the job fine for now - If you want faster than 100mbit/s network speeds though, you'll need to upgrade it along with the ethernet. As with the ethernet, it's not a priority, just a nice-to-have.
The big coax amplifier you've got there was probably built in 1974 (note: pre-internet) and is all kinds of lossy/noisy mess. I'd go ahead and get rid of that and anything coax-related that you don't think you'll end up using. There's better stuff available on the market now for stupidly cheap, if you decide that you still need an amplified coax signal.
I'd love to see more pictures once you get it all put together and looking nice. If you need any further hardware advice, let us know!
I use these guys here. Look nice and are re-usable.
You could maybe try attaching it places with some velcro ties?
Like these https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1506482323&sr=1-2-catcorr&keywords=cable+ties
These things: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6
Use them.
http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6/ref=sr_1_3?ie=UTF8&s=office-products&qid=1267877013&sr=8-3
I like the reusable Velcro ties to keep cables together, and J channel cable raceways to path them along my desk and out of the way.
Helps a lot Jeeping things from looking messy or getting caught up. I never bothered with cable Management, but once I started I couldn't stop.
Also, these are always cheap on Amazon and they help you manage your cables.
These guys are strong, slim, and have the little hole to make loopies.
Major fan.
I just bought these and they work pretty well.
So you have four corners on the recessed ceiling (higher up), and four corners on the lower ceiling. I would almost prefer to put the cameras in the corners of the lower ceiling, because it would give a more straight-on view of the player/controllers. Each camera has a narrower viewing cone at extreme close proximity. The further from the main playspace they are, the more that cone has a chance to "spread out" and cover the actual playspace. In this case, you would draw your playspace with at least (2 ft) or (0.6 m) distance from each of the four walls, so people don't bash their knuckles at the borders.
However, you might not want your cameras to be further than (12 ft) or (3.6 m) apart from each other (for best tracking quality). I don't have a big enough room to run into this limit, so you may be fine with further spaced out cameras. If the lower ceiling corners are further apart than (12 ft) or (3.6 m), then you may want to put them in the recessed ceiling anyways. You can always ignore the Oculus Rift setup's warnings about camera spacing, by the way. In fact, with larger playspaces, the Oculus setup wizard will always complain. Don't worry about it.
Also, you might want to consider using this USB card. It can handle the throughput of all four cameras in USB 3.0 mode, if desired. You can downgrade any camera to USB 2.0 by simply running a USB 2.0 cable to that camera instead of 3.0. A passive USB 2.0 cable is fine for short runs, but consider an active USB 2.0 cable (like the one that comes in the box of an extra Rift camera) for longer runs. You should put your Rift headset in one of the motherboard's USB 3.0 ports (USB 2.0 might actually be fine), and then put all four cameras (you might only need three cameras) in the USB extension card.
You can search this subreddit for discussions on whether you want/need to have the cameras/headset on 3.0 or 2.0. I prefer to run everything at USB 3.0, but it may not be necessary.
For USB 3.0 cable runs that are less than 10 feet (say, those corners nearest to your computer tower), use these passive USB 3.0 cables. You're also going to want a passive USB 3.0 extension for your Rift headset.
For USB 3.0 cable runs that are more than 10 feet away, you should use an active USB 3.0 cable. This is necessary for cameras that are further away from your tower. Note that the cable I linked has an optional barrel port for a 12V power supply. You only need to power these cables if you're daisy-chaining two or more of them in a row (for runs longer than (33 ft) or (10 m)).
These CAT6 round cable clips should work well for cable routing, especially for the slightly thicker active USB 3.0 cables. These general-purpose adhesive cable clips work fine for runs of the thinner, passive USB cables, but you may have issues with the adhesive depending on your wall.
You'll want this HDMI extension cable for your Rift headset, to make use of the extra space. I've had a good experience with bunching the HDMI and USB Rift headset extensions together by using these lightweight Velcro ties. I have about a (10 ft) or (3 m) square playspace, so you may encounter different problems than me if your playspace is larger. I only have three cameras, and it works fine. Good luck in your setup, I'm sure whatever you do will work great!
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
I use these behind the nut on all my guitars. You can quickly loosen them and slide them over the nut to mute all open strings, or slide them behind it to get rid of resonating strings while playing or not.
Just to pipe in because I see this a lot.. For what it's worth, and absolutely not to discount the solid advice, I think the FFOF being too hot was more a problem back in the days of autoflowers being more new and "unstable" for lack of a better word. Even a ~3:1 FFOF/perlite mix (along with a small part of the AN line) has been getting me a couple ounces per plant under chinese COBs for a couple years with no issue. Again, SloatThritter's got their stuff dialed in, I also definitely agree with the lighting advice. I just wanted to mention that ocean forest isn't necessarily instant doom and gloom or burned plants.
To tack onto that, https://www.amazon.com/VELCRO-Brand-2-Inch-Count-Black/dp/B001E1Y5O6/ are an LSTer's dream if you are using fabric pots.
What cost?
Seriously, what this guy said. Get these: http://www.amazon.co.uk/dp/B001E1Y5O6
They attach to the cable so you can't lose them, and they last for ages.
So would these velcro ties work alright?
Use VELCRO
I used these velcro ties to attach it to the frame:
https://www.amazon.com/gp/product/B001E1Y5O6/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
don't use those check these out. I got mine on sale for 5 ish per.
Velcro cable ties are millions of times better. I bought a pack for home, and use them with my home theater and computer wiring. I use these (or something very similar).
Probably better prices to be found elsewhere, but in a rush to find cable ties, I bought one of these a couple years ago (for personal cables, not bulk use), and I still have them around and use them regularly. I bought them as an Amazon Prime customer, so they were $7.10 and free shipping.
http://www.amazon.com/gp/product/B001E1Y5O6/
I ordered these reusable Velcro ties on Amazon.
They are great because you get 100 of them for cheap and they allow you to easily correct mistakes or add new cables. Also, they don't strangle and damage your wires like zip ties do, and removing them does not require cutters... Ya know, since they're Velcro. You can even string them together to make large loops that can hold your cables against your desk's legs.
Here is a pic of them in action.
I hope that helps!
Velcro cable ties are close to $5 and very useful for taming tangles.
https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I just went wireless for mouse and keyboard. It's not really true that they're worse for latency. The feel of mice without the friction or pull of cables is so much better, also.
For everything else, there are ways to manage cables. Velcro sells loop ties that are pretty effective at bundling excess length. You can also bundle different cables together. There are zip ties, as well.
https://www.amazon.com/gp/product/B001E1Y5O6/
I like these
https://www.amazon.com/gp/product/B001E1Y5O6/
has a loop to hold itself to one end, to they don't get lost and make clutter when the cable is in use, and can take up slack when it is in use. Cheap too. Tight hooks and loops so it doesn't pick up as much trash as others. I'll even remove and replace some of the Velcro that comes on things already.
Dude... buy some of these
They're a cable management godsend
Ya I used velcro ties. Made this process much easier as I could wrap/unwrap very quickly.
https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Good question, I did a few things. As you can probably see I have a ton of stuff plugged in, so I'm running one giant power-strip and another smaller one that are command stripped to the wall above the molding. Everything else (speaker cable, ethernet cables, HDMI, etc.) is all tied together by device with these guys. It still honestly not great but at least it's tied up and pushed back enough that cables aren't easily seen.
NZ represent!
Besides what Serptintine said about the mobo and 4690K, I'd stick an SSD in there as a boot drive.
I've actually been in the process of building a PC for the last few months, here are some things I've found:
Base price is $12.50, +$5 for every 500g. So essentially, minimum is $17.50. Make sure to group Amazon parcels into as few deliverables as possible. Amazon global shippping is almost always cheaper so check before you send to your YouShop US address.
Feel free to ask me any questions.
These are for people like you.
I'm constantly buying packs of these cheap straps: http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Not just for case cable management, but pretty much any cable for anything. I love these things.
Velcro strips from amazon. Much more convenient than zip ties. http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Everything is tied and stuffed behind the back panel. There are a lot of zip ties as well as these awesome Velcro ones I got from Amazon.
http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I just took a look at your case and even with a non-modular PSU. You shouldn't have an issue keep thing neat. Your case has so much room for activities.
http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
Order these, never again will you need zip ties. Worked wonderfully in my build, honestly the best purchase I made as far as "extras" goes.
I have a walking/crawling/climbing baby, and cats. Let me help you there:
Velcro Ties
This product saved my life and my sanity.
I recently went on a cable management spree myself. I looked at baskets but ended up going with a cable box and Velcro ties.
http://www.amazon.com/gp/aw/d/B0019T0J9S/ref=mp_s_a_1_3?qid=1453832556&sr=8-3&pi=SY200_QL40&keywords=bluelounge+cable+box&dpPl=1&dpID=31X9MbzH8jL&ref=plSrch
http://www.amazon.com/gp/aw/d/B001E1Y5O6/ref=mp_s_a_1_1?qid=1453832946&sr=8-1&pi=SY200_QL40&keywords=velcro+cable+ties&dpPl=1&dpID=31SGEFLLv%2BL&ref=plSrch
These are aweomse and highly recommend them to anyone trying to tidy up their station.
Anyway, congrats on a clean station, op, it's looking really awesome.
Found these on amazon: https://www.amazon.com/gp/aw/d/B001E1Y5O6
As was mentioned, velcro works great.
http://smile.amazon.com/gp/product/B001E1Y5O6?psc=1&redirect=true&ref_=ox_sc_sfl_title_37&smid=ATVPDKIKX0DER
I would recommend these alternatives instead of zip-ties.
Try these. I have a huge box of assorted cables and these work great to keep em organized.
these are by far the best cable ties for the money.
Ninja Edit: Just noticed you are in the UK, I'm sure amazonUK has these also!
I use velcro straps just above the ears. Here is a picture.
http://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
https://mega.co.nz/#!E1YxFJIa!QZlx3uJAVezcQDtr_bP25G0NYq_6pYsM24OWjXjo08Y
https://mega.co.nz/#!EtQHVaLR!gFa4LXsHJGTCrCGxWqJdHElraM9pvoj12V4dY_rMdI8
http://www.amazon.com/gp/product/B001E1Y5O6/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=AQNACJEM8PUJ1
I use these ties. Pretty sure they used to be cheaper but they are still good.
It's still $5.99 from Amazon.com. The $9.99 price is from a third party seller.
Any straps for cable management work. There’s a lot sold for pc cable management on amazon.The ones I used came from all the cables for my modular power supply from EVGA.
You could realistically buy a Velcro strip and cut it down into pieces if you want.
I like to use these: https://amzn.com/B001E1Y5O6
When they wind around the cable too many times, I just cut them. Makes it easier to re-tie them and they're cheap enough to experiment.
I really like the use of wall space. Would be cool to have some 3d printed hangers for the controllers!
Here
Don't forget about outside of the case. You can use these neoprene sleeves to bundle the power and video cables behind your desk. You can also use velcro strips.
The vast majority of them are poorly made, leave sharp edges, don't provide enough tension or far too much.
This is the real deal and it is pricey. Unless you're using it daily, shearcutters are the way to go, imo.
Why not use these? I use these all the time for control wiring in cubicles and I love them
zip tie gun
http://www.amazon.com/Panduit-GS2B-Controlled-Tension-Cut-Off/dp/B001EU2558
This is the one we used when I was in the Air Force:
https://www.amazon.com/Panduit-GS2B-Controlled-Tension-Cut-Off/dp/B001EU2558/ref=pd_sbs_328_4?_encoding=UTF8&psc=1&refRID=GYV9ZXMJCX0EDDF9V882&dpID=41RdUtu0c4L&preST=_SX342_QL70_&dpSrc=detail
It won't affect the power through the cables. As/u/roj2323 mentions, it will be pretty nasty. Get some zip ties on Amazon. Here is 100 of them for less than a dollar.
http://www.scan.co.uk/products/1tb-samsung-hd103sj-spinpoint-f3-sata-3gb-s-7200rpm-32mb-cache-89ms-ncq
Cheapest HDD price i've found so far (aria sold out as I posted this ): )
http://www.overclockers.co.uk/showproduct.php?prodid=CA-239-CM
Cheapest case so far
http://www.dabs.com/products/xfx-550-watt-core-edition-full-wired-80--bronze-psu-7NSW.html?refs=50544&src=3
Cheapest PSU so far.
http://www.amazon.co.uk/Asus-GeForce-560TI-DirectCUII-Graphics/dp/B004K8R8DA/ref=pd_ys_qtk_general_recs_19
Cheapest card.
http://www.amazon.com/Plastic-Cable-Ties-100-Pack-Black/dp/B002C0SKBW/ref=sr_1_5?ie=UTF8&qid=1322440952&sr=8-5
zip ties.
http://www.amazon.com/Plastic-Cable-Ties-100-Pack-Black/dp/B002C0SKBW/ref=sr_1_2?s=electronics&ie=UTF8&qid=1456848198&sr=1-2
http://www.amazon.com/Vinyl-Decal-Every-Moment-Beyond/dp/B00C3UOKOM/ref=sr_1_2?s=home-garden&ie=UTF8&qid=1456848242&sr=1-2
Total of $4.12
Get yourself a 100 pack of zip ties for that sweet cable management:
8" Plastic Cable Zip Ties 100-Pack (Black) https://www.amazon.ca/dp/B002C0SKBW/
Whitmor 6071-1723 Four Storage Cubes, White https://www.amazon.com/dp/B000LRGV3W/ref=cm_sw_r_other_awd_Ak1OwbFCBT3Y6
And
8" Plastic Cable Zip Ties 100-Pack (Black) https://www.amazon.com/dp/B002C0SKBW/ref=cm_sw_r_other_awd_Dl1OwbSRVGBZA
Here is the mobile version of your link
These Zip ties help quite a bit in organizing cables, otherwise power cables go all over the place.
Completely unsolicited suggestion - Cable tie mounts to route the wires.
https://www.amazon.com/dp/B003L16ZYU/
You sticky these where you want to run the wires, then you zip-tie the wires to the mounts, then cut off the zip ties tails.
Underneath my desk i have 2 ikea signums holding all my cables, and if i need to route the cables somewhere specific like behind my monitor I use some sort of zip tie mounting plate together with zip tie's of course! Just take your time and route the cables however you like them.
zip tie mounting plate: http://www.amazon.com/Monoprice-Cable-mounts-25x25-100pcs/dp/B003L16ZYU/ref=sr_1_1?ie=UTF8&qid=1457803967&sr=8-1&keywords=zip+tie+mount
ikea signum: http://www.ikea.com/nl/nl/catalog/products/30200253/
hope it helps :)
Never mind, found them:
Monoprice Cable tie mounts 25x25(mm), 100pcs/Pack - white https://www.amazon.com/dp/B003L16ZYU/ref=cm_sw_r_other_awd_19P2wbT100EJX
Monoprice Cable tie mounts 25x25(mm), 100pcs/Pack - white https://www.amazon.ca/dp/B003L16ZYU/ref=cm_sw_r_cp_apa_i_i4D2CbK6NS0EC
VIVO Dual LCD LED Monitor Desk... https://www.amazon.ca/dp/B009S750LA?ref=ppx_pop_mob_ap_share
These are kind of similar, its what I use for alot of stuff http://www.amazon.com/Monoprice-Cable-mounts-25x25-100pcs/dp/B003L16ZYU/ref=sr_1_5?ie=UTF8&qid=1458821693&sr=8-5&keywords=adhesive+cable+clips. You can use zip ties around them so you can make nice bundles and what not.
Quick and dirty way would be to take excess cabling and just tape it to the back of that wood. The better way to do it though is to buy those adhesive tie down points to route your cables.
Something like this.
http://www.amazon.com/Monoprice-Cable-mounts-25x25-100pcs/dp/B003L16ZYU/ref=sr_1_2?ie=UTF8&qid=1451691042&sr=8-2&keywords=adhesive+tie+mounts
If adhesive works for you I really like these: https://www.amazon.com/gp/aw/d/B003L16ZYU/ref=mp_s_a_1_1?ie=UTF8&qid=1505748446&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=adhesive+cable+tie+mount&dpPl=1&dpID=31jbcFP3ezL&ref=plSrch
You'd need some zip ties as well: https://www.amazon.com/gp/aw/d/B017B6CMQK/ref=mp_s_a_1_2?ie=UTF8&qid=1505748615&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=cable+ties+4+inch&dpPl=1&dpID=51VaNw6mvxL&ref=plSrch
Monoprice hook and loop ties have a slit for attaching them around a cable, and cost like eight bucks for a 50-pack in multiple colors with Prime: https://www.amazon.com/dp/B004AFUJZC/
I like the pre-made ones with the slot so you can cinch them down.
I apologize. Let me do my best to break it down clearly for you here. Because it's a lot of stuff I was confused too, so I made a document that I hope clearly details my build and the associated costs. For the sake of this, I'm excluding peripherals, because I can't buy them from Memory Express anyways. If you're interested in what I've chosen I can link those too.
So, to begin, ME is holding on to their last 1060 for me, if I do my full system build with them (due to miners, they won't sell it to me alone). As a result, I can price match any of my items with them -- including the video card (of course, I'll be hard-pressed to find the GPU for less than they're listing it for). That's why I listed PCPP -- according to the associate I spoke with, they're willing to price match with any of the sites on there, so long as they have the GPU in stock. This is the most up-to-date build I have -- I've for now excluded the peripherals and the RAM.
****
The CPU is the same as before:
Intel Core i3 8100 3.6Ghz, 6mb
Price Match w/ Vuugo @ $147.25
https://www.memoryexpress.com/Products/MX68268
**
The motherboard I think I managed to get the same one from a different ME, and it's being transferred to my local one.
MSI Z370-A Pro
Price Match w/ Newegg @ $149.99
https://www.memoryexpress.com/Products/MX68590
****
The RAM I'm still iffy about. The one I have on the build right now is a Kingston 2x4 GB for $125. I wasn't given a product number and forgot to ask, but through some digging on their website, I found this and I think it's that one because the price is the same (it's the only one at exactly that price). If not, they have it in stock and I can switch it out for this one.
As far as I can tell, it's identical to the one you linked. What do you mean by expandability? As far as I can tell, my motherboard has 4 memory slots. Can I not just add more RAM? Unless I need to use those to connect stuff like my HDD and SSD, but I thought those used PCI-e slots.
If 8 gb will do me fine then I'm happy, I just don't want to have to upgrade any time soon. The 16gb version of the same one is less than $100 more so it's something I'll have to consider. If it was you, what would you do? The choices:
Kingston HyperX Fury 2x4 GB
Price Match w/ PC-Canada @ $117.99
https://www.memoryexpress.com/Products/MX64812
OR
Kingston HyperX Fury 2x8GB
Price Match w/ Vuugo @ $218.50
https://www.memoryexpress.com/Products/MX66968
**
From what I could tell, ME had the best price on my SSD.
Samsung 850 Evo SSD 500GB
Memory Express @ $179
https://www.memoryexpress.com/Products/MX55510
I think I've decided on 500GB. More storage is always better, and again, I don't want to have to switch, transfer, or upgrade later. I aim to put only my OS and most of my games on there, so it will be dedicated to that.
*****
The HDD I went for 2TB. It's a $20 difference from 1TB so I figured the same as above.
Seagate 2TB BarraCuda HD Sata III w/ 64 M Cache
Price Match w/ ShopRBC @ $72.25
https://www.memoryexpress.com/Products/MX63178
*
The GPU I had to change from EVGA, because ME doesn't have that one in stock anywhere. This one, according to the salesperson and the Internet, has two fans and a higher speed. I figured that would end up being better anyways, but again, let me know if I'm causing a problem for myself here.
Asus GTX 1060 3GB
Price Match w/ PC-Canada @ $364.99
https://www.memoryexpress.com/Products/MX63930
The case I had to switch a bit to get one they had in stock. It's effectively the same as far as I can tell.
IN WIN G7 ATX Mid Tower Case, Black
Memory Express @ $59.99
https://www.memoryexpress.com/Products/MX52221
Same with the PSU. Think I used the filter to grab this one, sorted by Memory Express.
Corsair TXM Gold 550W 80+ Gold Certified Semi-Modular ATX Power Supply
Price Match w/ PC-Canada @ $94.99
https://www.memoryexpress.com/Products/MX65812
The monitor they have in stock. I was looking to get a cheaper one at about 120Hz but apparently nobody has those.
ACER GN246HL 24in Full HD 144Hz LCD LED
Price Match w/ Amazon.ca @ $249.99
https://www.memoryexpress.com/Products/MX64422
So the total price of all of the above comes to:
$1446,44 if I choose to go with 8 GB of RAM, OR
$1546,95 if I choose to go with 16 GB of RAM.
Prices may fluctuate a bit depending on the prices I'm matching with (I'll review as I get closer to picking up the parts) and tax etc.
I hope that was enough. Please let me know if there's any more info you need. Sorry for the late response by the way, trying to get some homework done at the same time, haha.
Once more, thank you for your help. You've gone above and beyond what anyone would have asked of you, and I appreciate your help very very much. This kind of thing is why I love Reddit.
***
I've added the details on my peripherals below, just for fun. You can totally ignore this if you want, but if you're interested, here's the extra stuff I'm looking to get.
Fasteners
$13.97
https://www.amazon.ca/Monoprice-106457-Fastening-Cable-Black/dp/B004AFUJZC/ref=pd_bxgy_147_2?_encoding=UTF8&psc=1&refRID=6JVF3PB6QH9VKNGJ9Z50
CM Masterkey Pro S RGB Cherry MX Brown
$139.99
https://www.amazon.ca/dp/B01D3BDN60/_encoding=UTF8?coliid=I2Q9BUBJBGLQRF&colid=27HBAHJXQ3YZ9&th=1
TP-Link TL-PA4010KIT AV500 Nano Powerline Adapter Starter Kit, Up to 500Mbps, Plug and Play
$49.99
https://www.amazon.ca/dp/B00AWRUICG/_encoding=UTF8?coliid=I3UXQO0VKJJAHK&colid=27HBAHJXQ3YZ9&psc=1
Mionix Ambidextrous Mouse (AVIOR 8200)**
$79.99
https://www.amazon.ca/dp/B00D3F7D86/?tag=pcp0f-20
I use something similar to these guys both inside my case for cable management, as well as outside for my headphones, mouse cable, etc.
Your lack of cable management is murdering my insides.
Here. Please get some of these and make your shit pretty.
https://www.amazon.com/Monoprice-Cable-mounts-25x25-100pcs/dp/B003L16ZYU/ref=sr_1_1?ie=UTF8&qid=1474305690&sr=8-1&keywords=zip+tie+mount
I have these and they work great. https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_apa_RQSTBbKEC4EET
Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!
Here are your smile-ified links:
https://smile.amazon.com/gp/aw/d/B0154MS9Q0/ref=mp_s_a_1_5
---
^^i'm ^^a ^^friendly bot