Best fabric dyes according to redditors

this is some sort of dye that went viral on instagram a while back

​

quick google search yields https://www.amazon.com/Invisible-Blue-Reactive-Water-Dye/dp/B00KPF5A3M

​

it comes in multiple colors if you look hard enough

jumpsuit pictures: https://imgur.com/gallery/9Hi4QyK

coverall: https://www.amazon.com/dp/B007EYZKT6?psc=1&ref=ppx_pop_dt_b_product_details

dye: https://www.amazon.com/dp/B06W9HYQR9?psc=1&ref=ppx_pop_dt_b_product_details

i think i’ve finally done it! i saw someone else post this jumpsuit as a possible dupe and since it was on the relatively cheap side ($30 for my size) i bought it along with the rit dye in rose quartz and it looks pretty much exactly the same as the coveralls the glossier employees wear! i used about 7-8 gallons of boiling water and followed the exact directions on the rit website with two caveats: i used about 7/8ths of the bottle and i only left it in the dye for about 4-5 minutes, stirring the whole time. i think i’m going to take it to get the “glossier” embroidered on the chest as well! with the jumpsuit itself though: i originally bought one size larger bc i wanted it to be oversized and it was HUGE so i ended up exchanging it for two sizes smaller (for reference: i sized down to a 36 and it fit just the way i want. i’m 5’5 and 114 lbs) so i would reccomend sizing down!

https://www.amazon.com/Dylon-Machine-Intense-Fabric-Laundry/dp/B071LNN3XJ

https://www.amazon.co.uk/New-Dylon-350g-Machine-Pods/dp/B071WKCM8F

this is the kit i used if anyone is interested! https://www.amazon.com/gp/product/B07HMNTV54/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

i would just recommend buying plastic bags to keep them in over night

I'm currently in the process of building a Let's Split using Matias switches, and while Matias recently started carrying Planck kits, white is boring. So after a little research, I discovered iDye polyester dye actually works on ABS

If you want to do this yourself, the process is pretty much the same as for dying PBT keycaps, you just have to be careful about temperature. I used an infrared thermometer to monitor water temperature and found that about 75C is the optimal temperature for dyeing, and I would try to avoid going any higher as ABS may start to warp.

I also noticed that the edges of the keycaps had some excess dye but if you wipe this off after you pull them from the dye it should wipe off and leave you with a relatively even dye.

Last of all, the iDye poly comes with a dye colour intensifier. DO NOT USE THIS it is a solvent on ABS and it will melt your keycaps.

The colours were very much not as advertised, the 10 purplish keycaps were dyed using blue dye. The two pink ones are were dyed using purple dye.

https://www.amazon.com/Jacquard-IDYE-454-iDye-Grams-Black/dp/B002O9BTXC?th=1

It was this one, comes in all different colors too.

https://www.amazon.co.uk/Dylon-Machine-Intense-Black-Powder/dp/B071LNN3XJ/ref=asc_df_B071LNN3XJ/?tag=googshopuk-21&linkCode=df0&hvadid=214470891806&hvpos=1o1&hvnetw=g&hvrand=1593205607677961920&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9045962&hvtargid=pla-413217499357&psc=1&th=1&psc=1

I've used this on a black patta x carhartt jacket made of ripstop material and it worked perfectly. Left the green patta x carhartt patch logo's perfectly normal.

I'd highly recommend. Just stick it in a washing machine (the whole bottle) with the hat and take the bottle out after one run and then do another run of the washing machine.

I would think a fabric or leather dye would be your best bet. It's not going to fix it per se but it'll look better

https://www.amazon.com/Fiebings-50-2046-BU-P-Leather-Dye/dp/B00XOXGUM2

yay, something i can actually talk about since i use pigment powders regularly in my kits :D.

Here we go!, Yes, pigment powders will work as future has the consistency of water and makes it a great transfer medium. The downside...Pigment powder has the consistency of water and if the powder has any metal flakes, they tend to sink directly to the bottom and will need to be mixed properly throughout its spraying. While i dont use automotive pigments, I use

https://www.amazon.com/Jacquard-Pearl-Powder-Pigments-32-Color/dp/B000BGSZFU

I have only had trouble with the macropearl powders. clogged my airbrush something fierce, but every other pigment has been working phenomenally.

EDIT: I might try mixing them in Tamiya flats and clears to see if it would make a better transfer medium. Future is great cause its readily available and cheap!

Tie dye! They sell Tulip brand tie dye kits at Michaels that are like $25, less with a coupon, and they will dye a TON of onesies. We did it and they turned out great. We did like... 15 onesies, five bibs, ten burp clothes, a few t-shirts and nursing tanks for me and my friends, and still had dye left over. It was fun and easy and they all turned out adorably.

Edit to add: this was the kit, very straightforward to use, would recommend:https://www.amazon.com/dp/B01FV60TAS/ref=asc_df_B01FV60TAS5155873/

http://www.amazon.com/Jacquard-Pearl-Powder-Pigments-32-Color/dp/B000BGSZFU/ref=sr_1_2?ie=UTF8&qid=1449547634&sr=8-2&keywords=pearl+ex

"Pearl Ex Powder Pigments"

I think it'll block out too.

I've used her Yellow Label once and don't remember it bleeding but I also didn't have a deep red.

On the other hand, I do have some experience with dye bleeding and recommend picking up a bottle of Synthrapol. To quote the person who told me about it:

>Its whole job is to remove excess unbonded dye from things. I’ve heard people say that Dawn does the trick too, but I can’t vouch for that.

You will have to use some type of wool wash or human hair conditioner to soften your knits up though, the Synthrapol will strip them of any lanolin/make them feel scratchier than before.

Tbh it's quite simple. Just purchase this and follow the steps.

Run uniform through wash with a box of this :
Pack of 2 Rit Dye Laundry Treatment Color Remover Bundled by Maven Gifts https://www.amazon.com/dp/B0161C43RQ/ref=cm_sw_r_cp_api_NMz.Bb5R4140G

Here is a description of how I dyed my vest green. Even though you are doing black dye, what might help make it look black instead of very very very dark blue would be to use Rit Color Remover powder to pull out the blue dye first.

edit: In the photo album from the above post, you'll also find photos of my dying process.

Modern leather has a top-coat that is essentially paint. From your photo, it looks like only the top coat has come off, the leather seems ok to me.

When this happened to my E46, I re-dyed it with black leather dye, then a new clear top-coat.

Here's what I used:
https://www.amazon.com/dp/B000HHM20M
https://www.amazon.com/dp/B00VQUCO3O

Warning: a little goes a LONG way. You barely need to use any dye. Likewise with the top coat: do a really thin coat, let it dry, and see how it looks. Apply additional coats until it feels right. Don't overdo it, and don't lay it on thick.

Alternative:
Others have reported good results with this leatherique kit:

http://www.leatherique.com/steering-wheels.html

Get the Jacquard Indigo Dye Kit

I AM THE OP. HERE THE LINK FOR THE NEON TIE-DYE KIT. here: https://www.amazon.com/dp/B00WWTWXWA/ref=cm_sw_r_cp_apa_i_gWk5Cb0D8MJ5Q

I used this kit earlier this summer. Here's some photos of the process.

Hey! I had this same question when I started out. I've done several pipes and Fiebings Leather Dye is what I used for each one. It's fairly inexpensive and you get plenty to make a dozen pipes.

I would sand my pipes down to around 400 grit, then dye with black, then start the sanding until it was almost entirely gone. Then I'd dye the color I wanted the pipe to be. It causes the black to really accent the grain and causes it to pop.

Good luck with your pipe!

Saw this dye at Jaya Grocer last week. Give it a try

This will be my 3rd stressless recliner. I've used Fiebings Dye on my first two that were badly sun faded and it worked really well. I think I paid $40 or $50 for those and thought it was a killer deal.

This one shouldn't need dye, just a thorough scrubbing and conditioning. The wood was fortunately just caked in dust, I got very lucky on this one.

They make different dyes for different types of fabric. You should be able to get one specifically for synthetic cloth.

Edit: Something like this could work. Rit Rosequartz Liquid Dye, 8 oz, Rose Quartz https://www.amazon.com/dp/B06W9HYQR9/ref=cm_sw_r_cp_apa_i_7jf1Db6H1AQVJ

I wonder if an indigo dye kit would work? Something like this one: http://www.amazon.com/Indigo-Kit-Natural-Clothing-Method/dp/B002E32N4W

For starters, I used this dye kit because it was cheap and easy. Once the vat's set up, I soaked the shoes in warm water, dipped them in the vat for 30 seconds making sure the whole surface was covered, then (very quickly) rinsed them off in a tub of clean water. Let them oxidize and repeat about ten times, or until you're satisfied.

This one

Well where to begin.

I cast using Polyester resin. specifically silmar41 sold by uscomposites. it smells but you do not need a pressure pot to make it work. did I mention it smells. I wear a organic 3m filter respirator when I cast. most of my casting is done in 3/4 inch pvc pipe for pen blanks with bigger sizes for larger items. I do have some cutting board molds for flat blanks. they work "ok" my favorite mold though is a silicone one. it is similar to these http://www.ptownsubbie.com/

I recommend heading down to your local micheals and buying some casting craft(brand of resin and activator as your first test. see if you like casting before spending a ton of money on pots and resins.

If you do and can handle the PE smell (some people are fine with it) then you can carry on with that. its cheap 5 gallons is like $130 but shipping is like $70. ( don't start out with 5 gallons)

next you will want some micas. https://www.amazon.com/Jacquard-Pearl-Powder-Pigments-32-Color/dp/B000BGSZFU/ref=sr_1_1?ie=UTF8&qid=1481252145&sr=8-1&keywords=pearlx gives you a good launching point. I have a bunch more places I get mine from now.

ok ok so you wanna do more

get a pressure pot and buy some alumalite. alumalite cures in an hour but has a open working time of like 7 minutes. so you need a pressure pot for it or you will have lots of trapped bubbles. alumalite is also great for hybrid castings (wood, pinecones, etc.)

anyway just the tip of the iceberg really. if you're on facebook there are a few good resin casting groups.

Thanks.

I was already aware that in general you could use mica for soap. I was curious if there was something special about Crafter's Choice or other soap supply versions of mica, compared to something like this that's marketed for stamping.

there is back to black dyestuff. the tags are probably polyester, so there's no need to remove them

I'd love to see your results... please keep us posted


"natural" indigo dye

http://www.amazon.com/Indigo-Kit--Natural-Clothing-Method/dp/B002E32N4W/ref=sr_1_1?ie=UTF8&qid=1383142426&sr=8-1&keywords=natural+indigo+dye

medieval euro style

http://www.personal.utulsa.edu/~marc-carlson/leather/ld.html

I'm using a surplus MOLLE assault pack, and a water bag. Total of $55. This setup works just fine.

​

...ok, and a $5 bottle of Rit dark blue dye, because the ACU made me feel like a "tacti-cool" tool.

Hello, Everyone. I am looking for help to fix my Bible.

I just got a Bible and the gold lettering on the spine was way off center, so much off center that I decided to look up how to remove the lettering. I learned that I could use rubbing alcohol to remove it and that's what I did, but it took the dye off the leather as well resulting in a less than flattering look. After it took the dye off of one part of the spine, I tried to remove more for the sake of consistency and it just turned out a disaster before I stopped and decided to look for help.

​

Here is a picture of the damage I have done:

https://imgur.com/a/KxrL3zo

​

Here is some information that you can hopefully use to better help me: The Bible's cover is made of "Ironed Calfskin." The cover's color is black. When I was rubbing it, the dye that came off seemed to have a somewhat thick consistency. Before coming here I looked at products, but was overwhelmed. Here is one product I found called "Fiebing's Leather Dye":

​

https://www.amazon.com/Fiebings-50-2046-BU-P-Leather-Dye/dp/B00XOXGUM2

​

But it says it's "For use on vegetable tanned or unfinished leather." I am not sure if my Bible is "vegetable tanned" or not. I also read about oil based and alcohol based dyes and don't know which is best.

​

If someone could point me in the direction of a good, high-quality dye and whatever I need to apply I would be super appreciative. This Bible is not just a show Bible to put on my bookshelf, but it is one I'll carry with me often and I'll place it on my lap to read, so if you don't mind I would like the dye to be as durable as possible so it does not easily rub off on my dresses or anything like that.

​

Thanks-a-million!

Non-mobile: this one.

^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?

Available at a lot of stores.

Dye:
https://www.amazon.com/gp/product/B000HHM20M/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Clear Coat, Basically:
https://www.amazon.com/gp/product/B003BCQ2JM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Dye Applicators:
https://www.amazon.com/gp/product/B013SNXF1Q/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1

I also used a paint brush for the resolene ,and did 3 coats of the dye(probably depends based on how bad your's is), and Three Coats of the Resolene, and let it dry between each coat and overnight before using it.

SECTION | CONTENT
:--|:--
Title | Faceup Stories: 26 Monster High Twyla
Description | « M A T E R I A L S & T O O L S » with affiliate links⤵︎⤵︎⤵︎ ★ Painting Materials ★ ◦ Faber Castel Watercolour pencils »»» http://amzn.to/2kc4HIP ◦ Schmincke soft pastels »»» http://amzn.to/2kD9j7X ◦ Pearl-ex pigments (shimmer) »»» http://amzn.to/2jfk6J8 ◦ Tamiya Acrylic Paint Clear (gloss) »»» http://amzn.to/2jGSpF6 ◦ Synthetic brushes in various sizes ◦ Water colour paints »»» http://amzn.to/2kDdoc7 ◦ Eraser »»» http://amzn.to/2jfoJmD ◦ Sharpener with replacable blades »»» http://amzn.to/2j...
Length | 0:08:26






****

^(I am a bot, this is an auto-generated reply | )^Info ^| ^Feedback ^| ^(Reply STOP to opt out permanently)

If I remember correctly /u/mfarmtown uses/used this one. Correct me if I'm wrong though.

https://www.amazon.com/Fiebings-Leather-Dye-Black-4oz/dp/B000HHM20M/ref=sr_1_3?keywords=leather+dye&qid=1562943416&s=gateway&sr=8-3

Dyes: https://www.amazon.ca/dp/B00WWTWXWA/ref=cm_sw_r_cp_awdb_t1_UHgoDb23913AC

The t-shirt where the colour ran is 50% cotton 50% polyester (the generic Gildan plain white t-shirts from Amazon). The t-shirt where the colour stayed is 100% cotton.

However, I have done 4 shirts now and only 1 of them the colour ran out. That's why I assume it's due to the wetness of the shirt.

Edit: no, didnt use soda ash.

I got it off Amazon.

http://www.amazon.com/Jacquard-Indigo-Tie-Dye-Mini/dp/B003IIN7HO/ref=sr_1_1?ie=UTF8&qid=1404262447&sr=8-1&keywords=indigo+dye

Price went up on it though and its not offered on Prime anymore :(

I've used this dye from Amazon before. Works really well!

It's pretty simple. My advice would be to make sure you follow the instructions, and do your dying outside or in a very well ventilated area. Also try doing variations of dyes, like duration of time in the vat and number of dips (dying it, then taking the item out to oxidize, then dying it again). You'll get a different product from different dying methods so just try things out to see what you like!

Synthrapol is also another option for fixing dyes. I use it for jeans and hand-dyed fabrics as well.

Oooooh. Yeah, liquefying the polish makes a lot of sense. I would be more inclined (for safety's sake) to put it in a shallow bath of hot water, but that makes a lot more sense.

Yeah, I would put black polish on and rub it in real good, then buff it, then put neutral on and use the lighter to burn it off. It put a really nice shine on the boots, but after doing this for two years or so, they started disintegrating. I was young and stupid, though.

Nowadays, i have a good routine for when I have scuffs on the leather. I use deglazer over the whole surface (fiebings is the good brand), then let it dry. Then I use leather dye (also fiebings) and apply it all over and let that dry. You have to be careful to apply it evenly, though, or you get streaks. Then I use lincoln stain wax generously (applied with a sponge or brush), and then buff the hell out of it.

This is the only technique I've found to really take care of scuffs, though. Polish (no matter how generously I apply it or how many coats) rubs right off the surface.

[deglazer] (http://smile.amazon.com/Tandy-Leather-Fiebings-Deglazer-2105-01/dp/B003SY712K/ref=sr_1_2?ie=UTF8&qid=1396971982&sr=8-2&keywords=fiebings+deglazer)

[leather dye] (http://smile.amazon.com/Fiebings-Leather-Dye-Black-4oz/dp/B000HHM20M/ref=sr_1_1?ie=UTF8&qid=1396972057&sr=8-1&keywords=fiebings+leather+dye)

It is a two part epoxy resin that I filled the holes with, it normally dries clear but I dyed it green and added iridescent powder as well. It sets up rock hard and it is somewhat machinable.

These are the materials that I used;

http://www.amazon.com/West-System-Epoxy-Resin-Quart/dp/B003T0UG98?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00

http://www.amazon.com/West-System-206A-Epoxy-Hardener/dp/B00080CUFK?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00

http://www.amazon.com/Rit-Liquid-Dye-Emerald-Green/dp/B00UL8SKWQ?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s01

http://www.amazon.com/Prima-Marketing-Finnabair-Ingredients-Iridescent/dp/B015JH4B7G?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00

Here is the dye I used:

http://www.amazon.com/Jacquard-Indigo-Tie-Dye-Mini/dp/B003IIN7HO/ref=sr_1_1?ie=UTF8&qid=1403654693&sr=8-1&keywords=indigo+dye

And if you are interested this is a great walkthrough I used as inspiration:
http://www.rawrdenim.com/2014/04/backyard-guide-indigo-dyeing/

Here is one more walkthrough that does a good job of showing you how different shibori techniques will turn out:
http://honestlywtf.com/diy/shibori-diy/

Good luck!

I wouldn't say that one is more complicated than the other, it's indigo, and then a couple mix-ins to start the reaction.

Everything in theory, right?

That said, I'd say that the one that /u/tab338 suggested should be fine, and is pretty commonly used. You can even pick it up on amazon if you've got credits there to burn.

Here’s a pretty cheap kit. Nothing super fancy but it will get the job done. I’ve used it without soda ash before and had no issues. I get 10 shirts out of a kit but also have some colors I don’t like left over. Also available at WalMart I believe, but expect to pay a little more

Good job (although I don't think you'll need that much maple ;) .) And hey, if you're crafty and feeling like making some guitar tools, you can use some of that maple, epoxy and a single-cut file (medium or fine) to make a fret-leveling file! I always keep some pieces of HD maple laying around, it comes in handy for all sorts of projects (plus it's strong and cheap!)

BTW, here's a link to Keda Dyes on Amazon, although they're available from their own site as well. The packets are small, but it's super concentrated (as are most powdered aniline dyes), so a little bit goes a long way. For $13 shipped, you might be interested in trying them out.

Here's a link to Fiebings Leather Dye, if you're considering giving that a go. Note that it's alcohol-based, so you can thin them out with alcohol if necessary (they're pretty heavy colors, so thinning would probably be a good thing; you can always add extra coats, but you'll have a lot of sanding to do if you put on too much!) Woodcraft and Rockler both carry some dyes as well, and Woodcraft is just a great place to shop anyway.

I don't know the difference between rit dye and the fiber dye.
Do you recommend use this for example?

https://www.amazon.com/Rit-All-Purpose-Powder-Dye/dp/B07THM1TCN

Or the typical Tulip All in one kit it's ok? Thx :)

I hope someone has pointed out that those slacks can be salvaged. Go to a store like Target, WalMart or any craft/hobby store that has a fabric or laundry section. In that section there will be an all purpose dye/tint. Rit is a common brand that costs $2-6, and is easy to do. It isn't recommended for 100% polyester, 100% acrylic or anything that's dry clean only, but it's worth a shot before replacing slacks, anyway. Not like they can be more ruined than they are.

In my experience black always turns out kinda purply dark almost but not quite black.

They sell these packs for pretty cheap. you can just buy a few and try it out if youre really into this idea.

Experiment. have some fun with it. Post your results

Hi there, were we able to locate your item or is this an active request? The shirt that u/levelreward suggested would be a good option. You could use a fabric dye to color match the checks.

In order to prevent getting dye on any other part of the hoodie you’re going to have to detach the pocket. You’ll need a seam ripper, rit dye, a double sewing needle for your machine, and thread that matches the color.
When detaching the pocket make sure you’re only cutting the thread holding the pock, and not any of the fabric.

Dritz 638 Large Seam Ripper 1-Pack Multicolor https://www.amazon.com/dp/B0001DSIVY/ref=cm_sw_r_cp_api_i_SQNDCbH32V5ZE

Rit Dye Powder-golden Yellow https://www.amazon.com/dp/B001K64OZA/ref=cm_sw_r_cp_api_i_DTNDCbG6QW030

Euro-Notions Twin Machine Needle, Size 1.6/70 (1), 2.0/80 (1), 3.0/90 (1) https://www.amazon.com/dp/B003IPJNES/ref=cm_sw_r_cp_api_i_sUNDCbQNNRG90

Sulky 942-1024 Rayon Thread for Sewing, 250-Yard, Goldenrod https://www.amazon.com/dp/B0017323AO/ref=cm_sw_r_cp_api_i_wVNDCbTBEZW9G

If you’re not comfortable taking the pocket off and sewing it back on, I would not recommend dyeing it.

I love love love leather dye it really is so easy. I have dyed coats, purses, boots, and a pair of pants so far. I use Fiebings Leather Dye amazon link. There are lots of tutorials out there but I'll tell you what works for me. This is for boots because I wanted them to last, purses coats etc were a lot less steps but anyway!

0-I didn't do this step because the chemical is illegal to buy in California but if you have a coated leather piece, something that's really shiny is usually how you would tell I gather, you would use a leather stripper here. But again I never did this.


1-Wash with Fiebings Saddle Soap


2-After it dries paint on your leather dye. I always did two coats although a lot of times it didn't need it.


3-After that dries buff the item to remove excess dye. If you forget to do that (like I do sometimes) dye will rub off on stuff.


4-Coat the item with something to perseve leather. I use either Obenauf's LP Boot Preservative or Obenauf's Leather Oil


That's it! And I definitely find the item looks a lot better after dye. The Obenaufs makes leather look amazing. And it's not animal oil so I like it a lot more than mink oil say.