Best furniture replacements parts according to redditors
We found 48 Reddit comments discussing the best furniture replacements parts. We ranked the 34 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 48 Reddit comments discussing the best furniture replacements parts. We ranked the 34 resulting products by number of redditors who mentioned them. Here are the top 20.
a furniture lifter
Agreed... I’ve never seen one of those. Found a similar one on Amazon for $90
https://www.amazon.com/Furniture-Lifter-Mover-25-Tall/dp/B004WLPNUK/ref=mp_s_a_1_6?ie=UTF8&qid=1542735923&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=furniture+jack&dpPl=1&dpID=31bzgPSiuGL&ref=plSrch
It is a custom part. Contact the bed maker.
Can you replace it with an adjustable glide?
Or, as pizzasteak said, modify a square u-bolt to fit.
Sectional Couch Connector.
Sectional Couch Connector Bracket. https://www.amazon.com/Sofa-Snap-Sectional-Couch-Connector/dp/B004V924FU
I personally don't like that premium webbing. It's very soft/stretchy and does break down over time. There should be roughly 3 each direction (though the Selig chairs I'm doing now have 3 front to back and 4 side to side).
This is the only elastic webbing I use in my upholstery shop: https://www.amazon.com/True-Choice-Webbing-Elastic-replacement/dp/B01C4R1GTK/ref=sr_1_1?s=home-garden&ie=UTF8&qid=1536184341&sr=1-1&keywords=2+inch+black+webbing&refinements=p_n_srvg_2947266011%3A2972982011
Ponkor Recliner Power Supply(Universal Version Compatible with All Recliner), AC/DC Switching Power Supply Transformer 29V 2A Adapter for Lift Chair or Power Recliner Limoss OKIN https://www.amazon.com/dp/B0714BYMGC/ref=cm_sw_r_cp_api_i_V3iFDbXG1D6XC
You can also get a battery that connects to it as well.
It seems slight so you could probably straighten it out with a couple of table stiffeners. That'll also prevent it from happening again in the future.
It's something like this
You can buy some anti-sag tabletop stiffeners such as these which the OP might have used but cant see in the picture.
https://www.amazon.com/Regency-Stiffener-66-Table-Tops/dp/B01DOZDUKO/ref=mp_s_a_1_1?ie=UTF8&qid=1542247919&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=regency+stiffener&dpPl=1&dpID=31q5hhcBCIL&ref=plSrch
I don't know if you're going to get anything super high quality, but these are some I'd probably go for if I were in your situation. They're at several different price points:
​
$830
$1235
$1616
$1636
​
I think the 1616 is very good looking and might hold up better than some of the others. The 1636 actually has drawers in the bed frame making it possibly the best value out of these sets. I think whatever you do you should consider getting a center support for your bed. The one I've linked has 3 crossbars. I'd buy 2 packs of these to support either your box spring or bunkie board. You'll need one or the other. Let me know what you think of the ones I've picked out or if you'd like any more info on bed stuff.
Or buy some stiffeners for the bottom of the table
I’ve purchased these generic versions for two different chairs my parents had after their puppy chewed the old ones. They work great years later.
IKOCO Lift Chair Power Recliner AC/DC Switching Power Supply Transformer + Power Cord … https://www.amazon.com/dp/B01AXG9TQ6/ref=cm_sw_r_sms_c_api_aWROBb3B717Y7
You need what's called a "stretcher" or "stiffener."
Take the top piece off.
Place it on the ground, upside-down, and put a book or something under either end and put some weight in the middle, like your knee or something (but not enough so that it breaks. You just want it to flatten out, or bend just a little bit the other way). Then screw in the stiffener.
If they're really that bad just replace them with one of these:
http://www.amazon.com/Sofa-Snap-Sectional-Couch-Connector/dp/B004V924FU/ref=sr_1_1?ie=UTF8&qid=1412566568&sr=8-1&keywords=section+couch+connection
Or these:
http://www.amazon.com/Choice-Parts-Connector-Sectional-Fastener/dp/B0075CLR5S/ref=sr_1_3?ie=UTF8&qid=1412566568&sr=8-3&keywords=section+couch+connection
You know what's disturbing, someone already makes a problem to fix this
Though for that price I doubt it works
I don't need double talk, I need this Sad but true story, Every night when i go to bed its not in a bed but on a couch. Long story short, I had a bed but when i moved it was an item that wasn't able to come with me. So after sleeping on the couch, it has began to droop, sink, break whatever you want to call it and these would help support me a bit. and i think /u/chrisrey89 needs this my reasoning? what would happen if /u/chrisrey89 were to fall down a cliff and break both legs, its dark, lonely, cold, no one for miles and miles! if only 911 could be called! wait what about his phone? he pulls it out of his pocket and what do you know his phone is smashed to bits. do you want to live forever with the knowledge that you could have bought him the phone case that saved his life. i could never live that down but if your cool with living with that guilt by all means move on to the next post. however if you want to be a hero, its all up to you!
Ok so cam Lock screws for furniture. Before buying you need to look at the headboard. These screw on one side. If that’s stripped you might want to do something else. Yes IKEA has them. IKEA Cam Lock Screw #118331 (12 Pack) https://www.amazon.com/dp/B07QYB3P9Y/ref=cm_sw_r_cp_api_i_5ioXDbS32XGZ5 you must confirm size
Do you need the whole power adapter? I think power couches generally use this type
https://www.amazon.com/dp/B01CSB1WRI/ref=cm_sw_r_cp_api_i_seilDb5R0N8CG
This is what parts they should have--->
https://www.amazon.com/Gizhome-Sectional-Couch-Connector-Screws/dp/B07J64M7M9/ref=sr_1_7?crid=8ZS1VHZV0PX2&keywords=connectors+for+sectional+sofa&qid=1571351866&sprefix=connectors+for+sec%2Caps%2C169&sr=8-7
Also, I bought the legs on amazon and attached them with threaded brass inserts.
Does it have to be Mac?
https://www.amazon.com/Craftsman-12842A13-Original-Equipment-Manufacturer/dp/B076CV9RP2
I bought this for mine, it fit perfectly. www.amazon.com/dp/B01KXIUX2S/ref=cm_sw_r_cp_tai_QEzwDbAEKWF45
I got this one: Ergonomic Sleep C Shape Soft Tencel Maternity, Pregnancy, Nursing Pillow Body and Pain Relief Pillow with Case https://www.amazon.com/dp/B01KLJQSQ4/ref=cm_sw_r_cp_apap_eROS92BzRtXtW
I really really love it. It's filled with bits of foam so it conforms to the body in exactly the right way. Plus it's only $40.
To be clear, one Alex Supporting Two Linnmons? Probably fine... Depends on which size Linnmon you choose and your equipment. Longest I have is 47" and it is pretty sturdy for the amount of weight I put on it, but I wouldn't want to sit on it or anything...
Worst case scenario add a third leg to each Linnmon next to the Alex, to prevent slipping and add additional support. Probably unnecessary, and can be added later if you notice a problem.
Someone else mentioned this, if you need more support
Good luck!
Have you thought of a mattress support in the middle? Gets rid of sagging for a better sleep. Check out this on Amazon - which really helps your mattress, it could increase the life of your current mattress and is inexpensive. Kind of gives it more support and health - reduces sagging.
Nice setup, wish i could use that case but roommates are too much of a hazard to go open frame.
Not sure if its the photo or not but looks like your desk is bowing a little, with a span like that you might want to add a center support leg or grab a table stiffener.
strut as in a structure support bolted under the countertop.
Can use something like this https://www.amazon.com/Regency-Stiffener-60-Table-Tops/dp/B01DOZDUEK.
I however used this since i had a old one lying around, just sanded it and repainted it to brown. drilled two holes at the end and bolted them to the underside of the Karlby. Length between the drawers is around 110cm.
https://www.amazon.com/Kapro-779-40-60-Spirit-Quality-24-Inch/dp/B00BQI00DW/ref=sr_1_99?crid=2ER6IGZONSLN6&keywords=level+tool&qid=1566402762&s=gateway&sprefix=levell%2Caps%2C315&sr=8-99
Install some bed frame risers:
https://www.amazon.com/dp/B07MCMDJ4W