Best license plate covers & frames according to redditors

We found 479 Reddit comments discussing the best license plate covers & frames. We ranked the 243 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Subcategories:

License plate covers
License plate fasteners
License plate frames

Top Reddit comments about License Plate Covers & Frames:

u/michaelpancakes · 18 pointsr/AutoDetailing

Rightcar Solutions Flawless... https://www.amazon.com/dp/B07CV5PLFM?ref=ppx_pop_mob_ap_share

This is the license plate holder I use. I bought it to reduce the vibrations my plate felt from my subwoofer.

u/TheDenvermetermaid · 18 pointsr/Denver

You can, however with the cold temps the zip ties usually will fail fairly quickly. I'd suggest a light gauge wire for a more permanent solution.

However I would suggest this: https://www.amazon.com/Show-Go-License-Plate-Holder/dp/B001E4E0ZW

u/tnitty · 16 pointsr/INEEEEDIT

Not bad, but I prefer the McLovin fake ID I bought a while back on Amazon.

Scene from the movie for reference

u/troutsoup · 13 pointsr/fakeid
u/WeaselWeaz · 12 pointsr/washingtondc

It isn't complicated. You go to your car's dealer, possibly AutoZone, or spend $10 on Amazon and use your own drill. Or look up '[year] [make] [model] front license plate mount'. Literally no excuse to take care of this.

u/Shoot2ill · 12 pointsr/GolfGTI

Hey guys! Long time lurker, first time poster here. Joined the club a few months back after purchasing my used (CPO) 2015 GTI Autobahn w/ Lighting Package. Like some other users on here, I was not a "car guy" prior to owning this little beast. I came from a 2001 Toyota Solara, so it's been quite the upgrade. All the modifications I found on here or from the various GTI forums out there, so I thought I would try and "give back" to this awesome community. Questions welcomed!

Current list of mods:

Exterior:

u/BrixSeven · 6 pointsr/minimalism

I have one of these. Similar effect, just a black boarder that doesn't eat into the plate. The ones that go over the front of the plate make it annoying to put on the new stickers.

https://www.amazon.com/gp/product/B011CQTR8G/

u/ffwdtime · 5 pointsr/teslamotors

The sto n sho holder seems like a much better option, that's what I'm going to install.

2017-2018 Tesla Model 3 STO-N-SHO Removable Front License Plate Bracket https://www.amazon.com/dp/B07B8WZPP4/ref=cm_sw_r_cp_api_b5CKBb0NR6Z5X

u/Harvir_K · 5 pointsr/cars

I brought this one

https://www.amazon.com/Altec-Products-Retractable-License-Holder/dp/B001E4E0ZW

I got the manual one because apparently the remote control ones weren’t waterproof and stopped working.

u/pluresutilitates · 5 pointsr/XVcrosstrek

For the rear I got the Carshow Automotive Products Plateguard, Tabless License Plate Frame and Holder/Bracket. There is also a chrome version. I like this because it looks clean with no tab holes also it keeps the metal license plate from touching the car.

My state does not require a front license plate so I got the Subaru Black Front License Plate Delete 12" with Laser Engraved Boxer Pistons There are different designs if you look on eBay. This one is my new favorite.

You can also buy a bracket that will mount a US spec plate to the JDM spaced holes. Without having to drill any new holes into your front bumper like a lot of dealers do.

u/Kratomho · 5 pointsr/Audi
u/denick · 5 pointsr/veloster

I just got [this one] (https://www.amazon.com/gp/product/B073W7X6SY/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) on recommendation from someone on the fb owners page. Haven't test fitted yet.

u/PunnyYolks · 4 pointsr/BMW

I used these brackets instead of drilling holes into my bumper.

This is what it should end up looking like.

u/notbob1959 · 4 pointsr/Dallas

Maybe the owner is a proctologist! Not sure how he is getting away with it but I am pretty sure that is not a real license plate. Whatever the case, the sign on the back says it is for sale:
For Sale
1974 Cadillac
El Dorado
12K - or Best Offer
Call David
972-978-2374

$12,000 seemed like a good price but it looks like it has 165,000 miles on it.

u/senorpoop · 4 pointsr/camping

https://www.amazon.com/Nilight-Mounting-Off-Road-Lighting-Warranty/dp/B073V2NDQY/

It mounts to the license plate mount. My buddy has one on his Outback.

u/just-another-post · 4 pointsr/Mustang

Hey OP, if you do end up installing a license plate, get an undermount license plate holder. This what I bought for mine. It's basically a giant L-bracket which I attached to the underside of the bumper, where the drill holes are hidden (I drilled just above where your rally lights are).

If you want to shell out the extra $, you can also go for a truly drill-less option.

Then, one day, when the laws are repealed (wishful thinking), you can laugh all the way to the bank...the bank of undrilled bumpers.

u/Blubaru23 · 4 pointsr/WRX

Regarding the relocates the Grimmspeed one is the best.

It blows the Perrin one out of the water in regards to adjustability. Perrin can only slightly adjust vertically where as the GS has a ton of vertical+horizontal.

I know because I own both.

u/darks0ul56 · 4 pointsr/WRX

Do you mean using the Japanese standard holes for a license plate? If so I bought mine on amazon. It came with 2 screws and you place the rubber screw expander first then the screw and its super sturdy. https://www.amazon.com/gp/product/B01EKVUJC8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

u/Ftpini · 3 pointsr/GolfGTI

I bought this one and its perfect. I can't recommend it enough. It has the added benefit of being able to simple reinstall the tow hook cover should my state come to their senses and ditch the requirement.

u/theteddybear98 · 3 pointsr/Hyundai
u/1dayumae · 3 pointsr/rva

I would just use a friends ID

u/JudaiMustang · 3 pointsr/GolfGTI

I have this one coming in today. Heard good things about it. Will let you know how it turns out, but it's the only one I saw on amazon that got good reviews, and I had Amazon credit to burn.

u/wpcloki · 3 pointsr/WRX

https://www.amazon.com/License-Plate-Adapter-Kit-Subaru/dp/B01EKVUJC8

quick google for 'wrx front license plate adapter' turned that up on Amazon. Looks like it should work

u/crackindong · 3 pointsr/GolfGTI
u/mythbehaved · 3 pointsr/mazda3

It was this kitAmazon

I think I might try the corksport mount soon because I had to put a rubber shim on the bracket to keep it from spinning easily.

u/St0f89 · 3 pointsr/XVcrosstrek
u/tljyb · 3 pointsr/subaru

If you can find a direct fit one that goes into the tow hook, go for that one. My Saabaru has one, I think it's Rho (http://www.rhoplate.com/) or something.. Grimmspeed makes one, too.

If you don't mind drilling into the bumper (after cutting all the plastic out of it to fit the FMIC into mine, I wasn't about to hesitate doing 2 screw holes), you can get the Autozone one.. this seems to be the one I got: http://www.amazon.com/dp/B0013HP98C -- except I paid 10-12 bucks, I think!

u/boilerchemist · 3 pointsr/TriCitiesWA

I ordered one like this and requested the dealership to fix it while I dropped in for an oil change.

u/_-__-___-____ · 3 pointsr/FocusST

Honestly, nothing special

u/xDUMPWEEDx · 3 pointsr/subaru

Or you can just buy this and use the holes that are already there. https://www.amazon.com/gp/aw/d/B01EKVUJC8/ref=yo_ii_img?ie=UTF8&psc=1

u/rustafur · 3 pointsr/XVcrosstrek

https://www.amazon.com/gp/product/B018FUYN0O/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1 These are what I used to replace the dealer plates. They match the other black plastic bits pretty closely.

u/edom31 · 3 pointsr/mazda3

I use this on both my cars.

It is practical and really does not add/takes away from the look. A bit expensive, kinda... but it solves the issue of plate-to-metal and it gives it a neutral look.

u/32F492R0C273K · 3 pointsr/WRX

Here is one.

But you can find more if you search for "Subaru front plate adapter" or something along those lines.

u/WakiWikiWonk · 3 pointsr/XVcrosstrek

I am pretty happy with this combination:

https://www.amazon.com/gp/product/B01EKVUJC8

https://www.amazon.com/gp/product/B018FUYN0O

https://www.amazon.com/gp/product/B000SOM9GQ

It did require some minor mods. I drilled the cover so it takes 4 screws instead of 2, used a dremel to make it so that the screws didn't stick out too far in the rear, and applied some JB weld around the nuts so that they wouldn't spin. A bit of work, but well worth it IMO.

u/memerson3996 · 2 pointsr/subaruimpreza

I believe this is what you're looking for:
grimmspeed license mount

Aren't there already holes in your front bumper? If so, you can use this mount which has expansion fasteners sized for those holes. I've been using a kit like it for 20 months now without issue.

u/ashtong · 2 pointsr/mazda

They're usually called no show plates where you can have it up and showing and then when you want it flips down and hides under the bumper. First thing I bought for my car and bought it from Florida so it didn't have the holes drilled already. This is basically the same one I got

http://www.amazon.com/Show-Go-License-Plate-Holder/dp/B001E4E0ZW

They also make a electronic one but it's not worth it. I had them install it for free when I was getting headlight work done the day I bought the car

Also here are some other photos I took earlier today that show the frame location and such better. http://m.imgur.com/a/dCkgj

u/RDWD507 · 2 pointsr/ft86

This is what I got for the rear plate, highly recommend

https://www.amazon.com/dp/B07CV5PLFM/ref=cm_sw_r_cp_api_i_d5GvDbDHNVPB8

u/Mr_E13 · 2 pointsr/Audi

Show N Go License Plate Holder by Altec http://www.amazon.com/dp/B001E4E0ZW/ref=cm_sw_r_udp_awd_vdJmtb1W9QH9Y here try this

u/charlesca · 2 pointsr/Honda

I have the GROM and I do not like it. In order to switch input sources you have to hit the right buttons within a couple seconds of changing to CD. It's a PITA and I wish I would have never purchased it.

Consider getting a USA SPEC http://www.scienceofspeed.com/products/interior_performance_products/NSX/USASpec/

For the license plate, options include http://www.scienceofspeed.com/products/exterior_performance_products/NSX/ScienceofSpeed/Stealth_License_Plate/ or http://www.amazon.com/Show-Go-License-Plate-Holder/dp/B001E4E0ZW/ref=sr_1_2?ie=UTF8&qid=1394685661&sr=8-2&keywords=front+license+plate+holder

u/Tendaena · 2 pointsr/Random_Acts_Of_Amazon

Tardis licence plate cover My favorite desert is German Chocolate Cake it's perfect. Chocolate cake with a caramel, pecan, and coconut frosting! Yummy. cheesecake all day everyday. Happy cake day and thanks for the contest.

u/mondomondoman · 2 pointsr/Random_Acts_Of_Amazon

cheesecake all day everyday

My favorite dessert is tiramisu. I LOOOOOOOOVE it so much. Its hard to find one thats just the way I like it but its so good and rich and just talking about it is making me want one. dammit and I can't afford one right now :-(.

Edit: Whoops for got my link. This would be perfect on my new car. Thanks for the contest.

u/Foghorn225 · 2 pointsr/XVcrosstrek

So MannyCoon already answered the part about the spacing of the existing holes, but here you go. This license plate actually uses these holes.

u/pyro2927 · 2 pointsr/camaro

Should have gotten one of these.

u/Silenthunter87 · 2 pointsr/FocusST

Sto-n-sho bracket mounts to the underside of the bumper and is removable, but stupid expensive.

Ive seen some guys zip-tie the plate to the grill mesh.

Amazon has a few cheaper hide away front mounts like this

You can also add a tow hook mount to the crash bar and use it to mount the plate through the grill as well, but those tend to be more pricey than the sto-n-sho, but look great.

u/Sp3nt93 · 2 pointsr/WRX

I have this bracket, and it works great.
License Plate Adapter Kit for Subaru https://www.amazon.com/dp/B01EKVUJC8/ref=cm_sw_r_cp_apap_2tOOd8X76jxQJ

Will definitely need to fold down the back seats to fit 4 tires.

u/wcalvert · 2 pointsr/legaladvice

> as long as I keep the front plate in the glove box and present it if I am asked than I will be okay.

Almost certainly is not following the law and preferential treatment is given due to owning a high-end car.

First, I'm kind of intrigued as to what kind of car it is. You don't here about too many numbered cars anymore.

Second, you do have a few options. I also wanted to protect my bumper from drilling holes and I got a piece of foam and zip tied the plate to the grill. Can definitely be done in a way that doesn't look bad.

Your other option is to get something like this I've seen all sorts of these, and you can even get ones that will retract or extend from inside the car.

Companies also make front plate mounts that utilize existing holes in the bumper.

u/Agamoruso · 2 pointsr/XVcrosstrek

Got it on Amazon. Seems to work ok. Got it so I could mount my light bar behind the rear grille and shine through.

https://www.amazon.com/dp/B01EKVUJC8/ref=cm_sw_r_cp_awdb_wKNOyb1AKFH65

u/Spreests · 2 pointsr/pics
u/murphzlaw1 · 2 pointsr/phoenix

it's a license plate frame, but yes.

u/B0Pstar · 2 pointsr/GolfGTI

Its great! It was cool because the dealer asked me if I wanted them to drill into the bumper or not. I said no thanks and picked up this

u/CommunistCuntWaffle · 2 pointsr/Elantra

DEWHEL JDM Front Bumper Tow Hook License Plate Mount Bracket Holder Tow Hole Adapter Bolt On for 10-16 Hyundai Genesis Coupe https://www.amazon.com/dp/B073W7X6SY/ref=cm_sw_r_cp_api_i_.30NDb6VP7WBD

I was skeptical at first because the reviews said that it spins and that it doesn’t fit an Elantra but after taking the plunge it works perfectly. Fits exactly like it’s supposed to and doesn’t spin at all. Mine is hand tight and can still move but does not spin. Took maybe 10 mins to install because it has multiple mounting points so you can get it exactly where you want it. I have mine on the farthest left hole in the middle.

u/Rmj512 · 2 pointsr/Volkswagen

So my state requires me to have it on as well which is pain; dealer never drilled holes which I'm fine with so I went right on amazon and found a $30 one. It's knock off and it works...but honestly I wish I spent the money on either the platypus plates or the one from US Milworks is really really good.

I went the cheap route and it's not the best but it does it's job

u/ScreamingChicken · 2 pointsr/WRX

I used this to get that look.

u/Snaisa6 · 2 pointsr/GolfGTI

Thanks. The mount is from Amazon, the Platypus Tow Hook mount. Bought it at $79, it's now $93. Pricey but one time purchase.

The Platypus License Plate Mount for Volkswagen Golf GTI Mk7 2015-2018 https://www.amazon.com/dp/B00MARZUI8/ref=cm_sw_r_cp_apa_9WuYzbVP7G5RD

u/idokamaroq · 2 pointsr/XVcrosstrek

I have the plate relocation kit that goes into the tow hook spot. You could get a bracket/adapter that mounts into the Japanese holes that come from the factory. I think the SSD light bar also has license plate mounting tabs if you wanted to go all-out :P

u/ItsSoFluffyyy · 2 pointsr/Lightbar

I like that bar a lot.. I’ll probably get one soon and try to craigslist my Nilight.

Random but I have a front license plate mount/bar.. does Oz have a sliding mount system similar to the Nilight? Idk if I can mount that bar on my license plate bar because it’s too wide :/

Edit: here is the mount

u/DastardlyCabbage · 2 pointsr/subaru

Well you don’t need one for the back plate, and with this you won’t need to drill new holes for the front plate:

https://www.amazon.com/dp/B01EKVUJC8/ref=cm_sw_r_cp_api_i_AHZTCb397DHEA

u/carissakayb · 2 pointsr/Random_Acts_Of_Amazon

I made the decision to stop caring what people think of me.

The amount that my life has grown towards the positive because of that simple decision has left me flabbergasted. :)

My other car is a tardis

u/Bubhubbub · 2 pointsr/SubaruForester

I just got two plain black frames to go with my 2018 Black Edition off of amazon.
https://www.amazon.com/dp/B018FUYN0O?ref=yo_pop_ma_swf

u/pheesh · 2 pointsr/subaru

Great looking Impreza.

Dumb question, what are the front license plate mounting holes like?

I have a 2016 Forester and had to get a special mounting bracket because the holes are Japanese style. I have an 2017 Impreza on order was wondering if I needed the same thing.

If I zoom in the front bumper, it looks like there are two little button-ish things?

u/toffa813 · 2 pointsr/GolfGTI

Personally I don't think I'd like the tow hook being off center, but I saw this Bell drill-less mount this morning and now it's on my Amazon list for when I get my GTI.

u/El_Chupacabra- · 2 pointsr/GolfGTI

One thing to consider is to get a bracket like this one, and zip tie the license plate to the lower grill just below where the tow hook would be. Way cheaper. Looks good. You don't have to deal with the ridiculous gap when mounting the plate on the tow hook.

u/rubeus7550 · 2 pointsr/mazda
u/Baitout · 2 pointsr/Audi

Right now it's zip-ties, but somthing likethis will do

u/SomeBlokeFromAstora · 2 pointsr/mazda3

I've used the iJDMTOY one on my 2017 Mazda 3 Sport GT. Install was easy though I had to tighten the nut behind the plate after a few months. So I just put loctite on it.

https://www.amazon.ca/gp/product/B01KB0SVT0/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

u/OreoStallion · 2 pointsr/WRX

fold seats + move passenger seat in the front up / lean it forward if you want it to be as smooth as possible without scuffing stuff

hood scoop i check every time I wash it for misc stuff but i've had 2 leaves get in there the past year... it's uncommon for the most part in my experience

​

ordered https://www.amazon.com/gp/product/B01EKVUJC8/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1

no drilling easily done took me 5 minutes

u/gwubsmuzix · 2 pointsr/XVcrosstrek

This is what i was planning to get.

Its a small little bar but believe itll help.

https://www.amazon.com/gp/product/B073V2NDQY/ref=ox_sc_saved_title_4?smid=ATVPDKIKX0DER&psc=1

u/InsertPlayerTwo · 2 pointsr/ToyotaTacoma

I couldn’t find one specifically for my bull bar, but the Westin one worked just fine.

https://www.amazon.com/gp/aw/d/B000BNXRVK?psc=1&ref=yo_pop_mb_pd_title

I also bought a license plate mounting plate to go with it

https://www.amazon.com/gp/aw/d/B00032K4VA?psc=1&ref=yo_pop_mb_pd_title

u/traverlaw · 2 pointsr/SubaruForester

If you are in a front license plate State, this is nice and it is better than drilling holes in your bumper Tell the dealer not to drill the bumper when you order the car. https://www.amazon.com/gp/product/B01EKVUJC8/

u/WRX2017 · 2 pointsr/WRX

My dealer told me that I don't want them to drill into the bumper when I picked it up. Ended up picking up a JDM adapter plate on amazon: https://www.amazon.com/gp/product/B01EKVUJC8/

It's a simple plastic backing with expanding rubber fasteners. I stabilized it with some foam weatherstripping to ensure it doesn't wobble. I also got a recessed chrome frame from a local auto shop.

A center mounted plate looks better imho, asymmetry is not my thing.

u/V1scera · 2 pointsr/subaru

Haha that feeling doesn't go away.

https://www.amazon.com/gp/aw/reviews/B01692HYRO/ref=cm_cr_dp_mb_see_rcnt?ie=UTF8&s=sd

And here is the relocation plate kit i used. It's a tight fit on a 2018, but doesn't actually rub or touch the car, and has held strong through multiple trips and machine car washes (i know, i know, supposed to hand wash only Haha)

u/moordzieK · 2 pointsr/WRX

There is an adapter kit that will fit a US plate with the JDM holes. https://www.amazon.com/gp/product/B01EKVUJC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Just got this for my wife's Forester, works great and looks good.

u/Coollow13 · 1 pointr/BMW

I'm in Texas and a front plate is "required" I just ordered one of these, it flips under your body work. I just hate anything that detracts from that lovely carbon pack.

https://www.amazon.com/Show-Go-License-Plate-Holder/dp/B001E4E0ZW

u/Derfwins · 1 pointr/GolfGTI
u/cheez6001 · 1 pointr/GolfGTI

If you're looking for another no drill option, I've got one of these zip tied to my honeycomb. It's a lot cheaper and I've had no issue with it in 25,000 miles.

u/juaquin · 1 pointr/GolfGTI

You can do neutral but still have a frame. I think without a frame it looks unfinished and "tacked on" if that makes sense. Just something simple like this.

u/call-me-neo · 1 pointr/nissanfrontier

Maybe something that doesn’t need drilling into the front of the bumper, like this?

u/judogirl · 1 pointr/Random_Acts_Of_Amazon

Why you should be able to throw matches in the woods, a story:

A young man was hiking one day in a wooded grove. As he was traversing a particularly steep slope he came across a cougar. The cougar came toward him and trapped him against a nearby tree. The men was scared for his life, as he had no weapons to defend himself. He reached into his pockets and found a box of matches. "Are cougars afraid of fire?", he thought. With his life in danger the man struck a match and threw it towards the cat. It hissed; they definitely don't like fire. He struck another and hurled it in the beast's direction, hitting its nose. The cat turned away and ran. Throwing matches in the woods saved this man's life.

Linky?

[EDIT]: Added link

u/Gforce1 · 1 pointr/teslamotors

So, I guess it wobbles slightly but I wouldn’t say it’s a lot and I have no idea what it looks like when driving because well I can’t see it but I doubt it is flopping all around or anything. The one concern I have would be street parking. The plate bolts to the frame and the bolts stick out behind it. If you were to have someone back into it there’s probably a chance the bolts could get pushed back and into the bumper and could do some small damage if it happens. The good news is if it’s a concern you can just take the plate off when you park but obviously if someone backs into you you’re still gonna have a scratch most likely. Other than that it’s been great and when it comes time to wash the car it makes it easy to clean the front by just removing it. Do look into the backing for the plate though. I used something like this:

Cruiser Accessories 79150 Mounting Plate, Black https://www.amazon.com/dp/B00032K4VA/ref=cm_sw_r_cp_api_YZFhAbF00ZPR6

Maybe even the exact same one and then I put a black frame in front as well. Made the whole thing nice and solid. When I tried it with just the plate it was flimsy and the plate wasn’t totally straight.

u/388859 · 1 pointr/LosAngeles

I had this issue with my volkswagen and I use a mount that's connected to my tow hook.
https://www.amazon.com/Platypus-License-Plate-Volkswagen-2015-2018/dp/B00MARZUI8

u/juliet1484 · 1 pointr/Random_Acts_Of_Amazon

My Other Car is a TARDIS

Because summer means road trips to me, and my car could do with some spicing up, courtesy of the Doctor lol. BINGO!

u/VTCHannibal · 1 pointr/Volkswagen
u/autumnfalln · 1 pointr/Random_Acts_Of_Amazon

I reallllly need a license plate frame, and this one is really awesome and has Prime! I could also really use this trunk organizer thing.

And this tablet car mount looks very nice and has amazing reviews!

Hope I was able to help you in your search a bit =) Thanks so much for the contest!!

u/DollarMenuFries · 1 pointr/genesiscoupe

DEWHEL JDM Front Bumper Tow Hook License Plate Mount Bracket Holder Tow Hole Adapter Bolt On for 10-16 Hyundai Genesis Coupe https://www.amazon.com/dp/B073W7X6SY/ref=cm_sw_r_cp_api_i_8uInDbMYTBTPM

u/case2150 · 1 pointr/GolfGTI

I just ordered one of these and will just zip tie it to the grill.

u/SubtleSalmon · 1 pointr/XVcrosstrek

My dealer also drilled the holes. This is the bracket you need to put a US plate on the Japanese holes, fits perfectly, and covers up the dealer holes.

https://www.amazon.com/License-Plate-Adapter-Kit-Subaru/dp/B01EKVUJC8

u/failagain-failbetter · 1 pointr/rav4club

Had the same problem. Very disappointed there isn’t a tow hook on my XLE premium. If you have a tow hook I would recommend getting a tow hook plate holder.

After buying several mounts I settled on this mount. Bought a couple wingnuts and washers and it became a no drill front mount.

https://www.amazon.com/Bell-Automotive-22-1-46230-8-Adjustable-Mounting/dp/B0013HP98C

u/Mind_If_I_Joe · 1 pointr/GolfGTI
u/boost_poop · 1 pointr/subaru

I waited for them to have those in stock for a couple months after I got my '16 WRX (I told my dealer I wouldn't accept the car if it had holes drilled). I got sick of waiting so I did it for a lot cheaper:

Bracket for $10 (cheaper can be had for $5 on there as well but this is what I used)

2 Well nuts and stainless steel screws ($5 at my local Ace Hardware)

so for as little as $10 this can be done if you're willing to put in a small amount of effort. In my case, had other stuff ordered from amazon so I was already paying shipping.. plus I drive by the hardware store every day anyway.




Also the well nuts have a rubber collar that sits between the bracket and the bumper, gently spacing it away from the paint. from the pictures it doesn't look like the adapter foundry one has that

u/DevanteWeary · 1 pointr/ft86

I use this: https://www.amazon.com/dp/B07CV5PLFM?ref=ppx_pop_mob_ap_share

and this:
https://www.amazon.com/dp/B00032KBEA?ref=ppx_pop_mob_ap_share

in the corner of my windshield. Might be an alternative for you.

I'm in California by the way.

u/BlackHawk30 · 1 pointr/subaruimpreza

Ohuhu Matte Aluminum License Plate Frame with Screw Caps (2 Pieces) https://www.amazon.com/dp/B018FUYN0O/ref=cm_sw_r_cp_apip_NAi76jaaJ5bYg

I can upload a picture if you want

u/gnvrys · 1 pointr/WRX

Or a way cheaper version: https://www.amazon.com/dp/B01EKVUJC8/ref=cm_sw_r_cp_dp_T2_ieztzbN8TC4N8

I used to like the off-center look but quickly wore off since everyone seems to have it nowadays. That and the fact that the rod connects directly to the frame making a fender bender potentially cost way more than it should.

u/Anton-LaVey · 1 pointr/GolfGTI

I have the CravenSpeed Platypus, it sits flush on my bumper (I added a strip of weatherseal to the back to disallow chafing). Goodluck, /u/porktube

u/hipst · 1 pointr/AskLEO
u/DrunkardRP · 1 pointr/subaru

I used the GrimSpeed plate relocation kit. It does stick out about 1.5" from the bumper, but you can adjust the angle of the plate.

Here are photos when I installed it 3 months ago.

I bought it on Amazon.

u/Bertrum · 1 pointr/seinfeldgifs

You can buy ASSMAN license plates from Amazon. Although I don't know if they would be recognized by the DMV.

u/Salsa_de_Pina · 1 pointr/funny
u/baddst · 1 pointr/mazda3

There's a bunch of options, but for the price you can't beat this one. I had a slatted one and it sucked. There are others but few have adjustable positions. This one worked well because the location can be dialed in by using the different holes and pivoting the frame which is what I needed for my accessory grill lighting. I recommend you use loctite or a rubber washer though.

u/Nhartley84 · 1 pointr/Corvette

This is how I beat the issue here in CA:

http://www.amazon.com/dp/B001E4E0ZW/?tag=nichohartl-20

Looks better than the wonky factory ones IMO.

u/tofuflower · 1 pointr/sanfrancisco

When this happened to my friend, he put on a no-drill detachable front license plate holder for inspection at the DMV, then took it off. Check out audi car forums for your model - other owners who had this issue probably came up with temporary fixes for the correction.

You could also install something like this for a more permanent fix to flip up every time you park.

I have a theory that LA is more lenient / cheaper ticket because there are more people that care about front aesthetics of the car. My brother doesn't have a front plate either and got stopped at LAX while circling with just a warning.

u/nhct · 1 pointr/mazda3

Where are you seeing $100?

The exact model you linked is at Amazon for $21.11, with free shipping and 30-day free returns.

There are lots of very similar models on eBay from as low as $11 (search for 'Mazda 3 tow hook license plate'), also with free shipping, with some sellers having sold scores and even hundreds of them, between $11 — $20.

It's not exactly a hard-to-find or high-tech accessory.

Any of them would get the job done, if that clean-grille but off-center look appeals to you.

At $24, one could say it's priced slightly above the going rate, due to the brand name.

u/DeadBlue19 · 1 pointr/PewdiepieSubmissions

https://www.amazon.com/Signs-Fun-NMLID-Mclovin-Licenses/dp/B0090R5R70 Its exactly from the movie, you can't design it

u/coke_can_turd · 1 pointr/WRX

It's to prevent obstructing air to the FMIC. WRX is top mount, so it's just for aesthetics, or to avoid drilling the bumper even though these exist.

u/SpeedyRaccoon · 1 pointr/MazdaProtege

Here’s a link to it.

iJDMTOY JDM Black Universal Fit Front Bumper License Plate Relocator Bracket Holder Bar https://www.amazon.com/dp/B00LSYW6QI/ref=cm_sw_r_cp_api_i_pSY2DbWHSQ15W

u/rico_wore_a_diamond · 1 pointr/mazda3

Thanks!
It's the Show N Go License Plate Holder https://www.amazon.com/dp/B001E4E0ZW/ref=cm_sw_r_sms_apap_ac1XoKhkv62r2

u/ShesWalkinOutTheDoor · 1 pointr/BMW

I had gotten one that was adjustable, so I put the holes from underneath. This was the one: https://www.amazon.com/dp/B0013HP98C figured I'd share if you can't find anything else.

u/hamtonp · 1 pointr/teslamotors

I've been driving in my current car for over 11 years and haven't been written up for a ticket... yet. I've been stopped for other things: expired registration, speeding, no full stop at stop sign but not for front plate. Maybe because the car is black and they don't notice.

My wife car on the other hand I was stopped for no front plate. I put the plate on and went the court house with a picture. There was a minimal fee. I think it was $10. Her car is white.

I plan to drive plateless until I get caught. If I do, I plan to either install the tow hook plate or the sliding under bumper plate. See here: https://www.amazon.com/Show-Go-License-Plate-Holder/dp/B001E4E0ZW

u/SmileAndDonate · 1 pointr/WRX


Info | Details
----|-------
Amazon Product | Bell Automotive 22-1-46230-8 Adjustable License Plate Frame Mounting Bracket
>Amazon donates 0.5% of the price of your eligible AmazonSmile purchases to the charitable organization of your choice. By using the link above you get to support a chairty and help keep this bot running through affiliate programs all at zero cost to you.

u/macropolophoto · 1 pointr/GolfGTI

I actually was looking for the same thing a week ago and couldn’t find anything I liked in red, BUT I did find a unique frame on Amazon that I really like because the plate “slides” into the frame from the back, so it only goes around the edges of the plate (doesn’t cover any part of the front of the plate.) They only come in black, but some red glossy enamel satisfied my GTI-red desires lol. Picture from the side really doesn’t do it justice; the red is much brighter in person. https://i.imgur.com/CvFBqPw.jpg

Here is the frame I got: https://www.amazon.com/dp/B011CQTR8G/ref=cm_sw_r_cp_api_u2fTAbDEF797J

u/snwebb88 · 1 pointr/GolfGTI

i can see the zip-ties -_-

not trying to rain on your parade though, i picked up one of these from amazon http://www.amazon.com/Cruiser-Accessories-79050-License-Bracket/dp/B00032K4TW/ref=sr_1_11?ie=UTF8&qid=1449020106&sr=8-11&keywords=front+mount+license+plate+holder and they also sell them at advance auto parts and that way the zip ties are hidden behind the license plate.

u/TheBodyIsAmazing · 1 pointr/TeslaModel3

I tried that for a while and got a ticket when I got pulled over for speeding. The ticket was dismissed after I showed evidence of installing it. Although they said that it still shows as a warning on my record so if I get pulled over for it again then I can't dismiss it.

I decided to go with a "Sto n Sho" link so that I can keep it hidden 99% of the time. It wasn't as bad to install as it looks, but I had a lift to easily get under it.

All that being said, I'd wait until you get a ticket to install anything. It really ruins the aesthetic in my opinion. At least in Texas.

u/tuck3r53 · 1 pointr/GolfGTI

You can always use something like this. Which is probably what I would do if I had to have a front plate.

u/1nkyb00g · 1 pointr/Random_Acts_Of_Amazon

1.) I enjoy time with my kid, video games, things that smell good, anything Doctor Who and I use to really enjoy painting but have not in a long time.

2.) As I said, anything Doctor Who

3.) I'd like to win because I never win anything 0_o, and because I want to make an elaborate THANKS post.

4.) Moon Knigt

5.) No problem giving out my address:)

Thanks for the contest!

u/RowieMonster · 1 pointr/Random_Acts_Of_Amazon

Ah, You and I have similar tastes!

I'm feeling you should get This and I should get This

Then we'd be matching!

Oh, This is funny.. x)

u/tigerpunch911 · 1 pointr/WRX

I bough this one and am happy with the result.

GrimmSpeed 2015+ Subaru WRX/STI License Plate Relocation Kit https://www.amazon.com/dp/B01692HYRO/ref=cm_sw_r_cp_api_i_jdSdBb0BQTXVD

u/BossMann123 · 1 pointr/mazda3

I got 35 in the front and 20% in the back. The plate relocator is this one It doesn't block the turn signal, it attaches into the toe hook that's on the right side. It's great!

u/xqze6m6ogWo · 1 pointr/teslamotors

I put suction cups on a plate holder. I pull this out only when using metered parking (which is fortunately only a few times a month).

https://www.amazon.com/gp/product/B00032KBEA

https://www.amazon.com/gp/product/B07CV5PLFM

u/mgarcia2682 · 1 pointr/mazda3

https://www.amazon.com/gp/product/B00LSYW6QI/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 you can mount it centered but i like it over to the side. since the bumper has a slight angle in the front.

u/eastskier · 1 pointr/WRX

Satin black slim frame on the back, and not running a plate on the front. but I have a second satin black one that I put on with the Perrin plate relocator for inspections once a year (MA actually takes pictures of mounted plates during inspections). I also use plastic black caps to hide the hardware. Is low profile.

Super cheap: https://www.amazon.com/gp/aw/d/B00236XLA0/ref=mp_s_a_1_47?ie=UTF8&qid=1524611517&sr=8-47&pi=AC_SX236_SY340_QL65&keywords=license%2Bplate%2Bframe&dpPl=1&dpID=31Gntk2mgnL&ref=plSrch&th=1&psc=1

u/jaaypeee · 1 pointr/XVcrosstrek

I used a bracket off of Amazon and it has worked great.

u/rustysurfsa · 1 pointr/mazda

I used this on my 3. You still drill holes but they're underneath and hidden from view. Sorry don't have pictures but if you look in the reviews you will find some.

u/Fayt747 · 1 pointr/mazda3

Just moved my license plate to the side on my 2018 Mazda 3 touring hatch.

Here's what I used if anyone's interested. It sticks out by an inch if you look at it from the sides though that's the only dumb part but to me it's worth.

https://www.amazon.com/gp/product/B01KB0SVT0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

u/murdochh · 1 pointr/BMW

MD requires a front plate n i don't want to drill any holes in the bumper so i got this. sure there are other ones that don't require holes but are all $55+.

thanks, recently put the lip on n i love it. do not love the scrapping though.

u/hmspain · 1 pointr/teslamotors

There is a 3rd party mounting bracket that avoids gluing the plate to the front. The down side to the bracket is that it mounts far lower that the "standard" position. If you hit a dip too hard (like the entrance to your driveway perhaps), the plate sometimes scraps slightly. It tells you to go over that dip (or bump) a bit slower so as not to compress the suspension too far.

https://www.amazon.com/gp/product/B07B8WZPP4/

u/livewoutlimit · 1 pointr/WRX
u/BoomFoxxy · 1 pointr/XVcrosstrek

I'm headed that way with my Crosstrek next Tuesday! Love the tires. Something I just replaced (after two years of use because the paint faded a bit) that might look sharp with your black highlights are these License Plate Frames. I always notice people's plates when I'm on road trips. Thank you for removing dealership frames if you had them originally, those irrationally infuriate me.
 
Obligatory not a salesperson, not affiliated in any way, that's just a normal old Amazon link and I'm not making money.

u/happy-cig · 1 pointr/BMW

Or just a plain black frame would work. BMW sells it for a markup, like $40.


I got these and they work well - https://www.amazon.com/gp/product/B00236XLA0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

u/-Aaron- · 1 pointr/XVcrosstrek

The bumper on the car comes standard with the Japanese mounting holes and then two "dimples" on the plastic just above the Japanese mounts. The "standard" way Subaru mounts the plates for the US is to screw the license plate directly into the dimples in the front of the car. This puts holes in the plastic, only connects the plate at the top two screws and is kind of a crappy way to mount the plate. I think the official Subaru plate just gives you a metal backplate to screw through, you still are drilling into the bumper plastic.


A cleaner solution is to ask the dealer not to drill into the bumper at all. Then get an adaptor like this: https://www.amazon.com/gp/product/B01EKVUJC8/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

It screws into the Japanese molded holes in the bumper with expanding screws and provides a flat plastic plate with four mounting holes for your plate, centered on the bumper. It avoids needing to drill any bumper holes and mounts the plate nicely.

u/gethsolar · 1 pointr/XVcrosstrek

Also, might I suggest this front license plate bracket. It's much thinner and better looking than the OEM one, isn't crooked, and doesn't attach with any goop.

https://www.amazon.com/gp/product/B01EKVUJC8/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1