(Part 2) Best paintball equipment according to redditors
We found 881 Reddit comments discussing the best paintball equipment. We ranked the 389 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
So you've got 250ish for a package for your son? Instead of buying that one I'll make one for you!
GoG Enmey Gun $125
Proto Primo Hopper $14
Ninja 48/3000 HPA Tank $50
JT Proflex $63
For the around $250 mark you will not get a better deal.
Came here to say this. It was solid yellow and he popped it out intact perfectly.
http://www.amazon.com/Reballs-Reusable-Caliber-Paintball-100rounds/dp/B0050HYH9I
Like others have pointed out, you're spending a lot of money. Hey, that's not necessarily a bad thing considering we know nothing about your budget.
Some tips for your selections:
As for a vest, given the stuff you've already picked out, the obvious choice would be a Condor MOPC in black. Plate carriers are generally highly modular, so with some additional MOLLE pouches you can set up your rig however you want.
Edit: model, not brand
http://www.amazon.com/Reballs-Reusable-Caliber-Paintball-100rounds/dp/B0050HYH9I/ref=pd_sim_200_1/184-7230517-6268765?ie=UTF8&dpID=51Cg0vsWHdL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=17TTEDMFBFK07YBDBBCH
Rubber balls for paintball guns. $14.
Just to help anyone out that may purchase this - I have this exact kit and bought this adapter to use it with a paintball tank. Worked perfectly. https://www.amazon.com/dp/B072XNYS5B/ref=cm_sw_r_cp_api_i_mfo1DbAAANC9A
I use a dye i4 and it’s really comfortable and doesn’t fog. I can also aim down my sight easily with it on. https://www.amazon.com/Dye-Precision-Thermal-Paintball-Goggle/dp/B002YHFMHS
Dual thermal lenses are best. But they are not fog proof. But conditions have to be bad to fog.
Here is a cheap dual thermal lens mask. 30 dollars on amazon
Empire Helix Goggle Thermal Lens - Black Header https://www.amazon.com/dp/B00M9HWOBA/ref=cm_sw_r_cp_apa_i_sHoDDbZ8SDTTW
Yes, but I'm pretty sure it's just easier to buy a cheap airsoft red dot.
http://www.amazon.com/NcStar-Tippmann-Reflex-Sight-Weaver/dp/B000S6CYFK/
This one should clamp down to actually fit N-Strike rails if you don't to bother with rail adapters.
I did a DIY version of this using a MOLLE panel and higher quality bags. Looks like the same first aid bag. It's been through 3 years of various weather and no problems yet.
I ended up using a rig like this for a year when I mained my Zeus.
Condor M4 Mag Pouch - MOLLE
If you don't use Molle, I used the same rig with this belt:
JT Paintball Pod Holder
I did add some tubing to make them friction fit and they never fell out while running.
I was able to hold 4 12-round sticks easily with this setup and used it for a long time.
You can see how it holds up here in one of our videos (I'm the guy w/ the green bandanna).
In that case get a Stryfe, prefferably one without a dart checker in, then buy a set of consumer lithium batteries and get a small performance advantage then the same rules apply. Get pouches for your team mags so you can still scoot, shoot and easily supply more ammo.
I am not a fan of restrictive gameplay or classes but if that's your game, that's your game!
I usually leave it on my desk, but inside one of these:
Paintball Goggle Bags.
http://www.amazon.com/Winchester-Soft-Drawstring-Paintball-Goggle/dp/B00OKTVLG4/ref=sr_1_3?ie=UTF8&qid=1462160128&sr=8-3&keywords=goggle+bag
Gonna second what a few other people said - mesh doesn't make good eye protection. BBs can and will shatter into your eyes. If you can't get contacts or prescription goggles, I wear ESS Innerzone 3 goggles over my glasses. Dye i4/i5 goggles also fit over my glasses, although they're pretty expensive. The Dye Special Edition looks way less sleek, but has as good antifog as the i4/i5 and fits over glasses too.
Considering you posted that you just had your first game then I'm assuming your talking about a newbie setup for getting into the hobby. With that being said $200 (USD?) Is going to be a bit on the low side for getting a reliable setup. Bare bones set up is going to be getting a gun, goggles + face protection, battery, charger, and BBs.
Good eye protection is an absolute must IMO as your eyes are very expensive to repair, used everyday, and don't come with a warranty. Impact resistant lenses are a must (no mesh eye protection unless you like fragmentation going in your eyes). Dye Mask My wife uses this mask and it gives good protection, doesn't fog up much, and is relatively comfortable. Can even wear glasses under them but it's a bit of a snug fit for them. This will cover your eye and face protection in an economic package. There is something like a $30 one that doesn't have the thermal lenses but I don't know how well they perform and fogging is a real pain to deal with so I think the extra $10 for thermal lenses is worth it.
Airsoft branded batteries are usually over priced so get generic purpose batteries. The decision is between lipo and nimh with lipo having a more expensive start up cost (a proper balanced charger isn't cheap) and needs more care/upkeep to properly use. Nimh are cheaper to start with (a smart charger plus a 9.6v 1400mah battery can be gotten for 35. Nimh are older tech and much bulkier but almost fool proof to use as long as you don't do anything truly idiotic with then.
The fun and expensive part of this whole endevor is the gun. This is where the wallet weeps and where investing in quality will pay off in fewer issue and potentially less upgrade/repair costs down the road. What style of gun do you want to get? We could suggest the most economical and starter friendly M4 for example but it doesn't help if your interested in something like an AK or something more exotic instead. The thing though is that most decent beginner guns are going to run closer to $150 or more which really cuts into that $200 budget when your already sinking $35 into your battery kit and $30 or $40 into your eye protection.
BBs is the last thing but again something important to get. Don't buy cheap BBs as they risk breaking the gun. Never use .12 BBs as they love to shatter. I highly recommend elite force BBs as they are good quality and not insanely expensive. .25g BBs are a good balance between indoor and outdoor play while I prefer .28 for outdoor settings. A bottle of BBs can range from $15 to $25 depending on how many you need and the weight of them.
Waht type of budget are you looking at?
There isn't much that goes into cleaning airsoft guns. A cleaning rod, some microfiber cloths, and a bit of rubbing alcohol is all it really takes for an AEG. For GBBs (I assume his G19 will be GBB) he might need a valve key to disassmeble the mags.
Maybe a gun rack or gun case
Patches are always a good gift
Comfy socks, like Darn Tough, are awesome.
If he uses midcap mags (No winding wheel on the bottom) he might like an Odin Sidewinder. It's an amazing speedloader. They've announced an updated version but I don't know when it's coming out. If he already has a Sidewinder there's a sound dampening thingy for it.
Edit: On a $250 budget you can get him some nice stuff:
Vortex Crossfire II 1-4x24 scope is an incredible scope. I know I'd be ecstatic to get one if I didn't already have one.
Salomon boots are awesome boots. Peoples feet can vary a lot so boots might not be a great gift but Amazon does have a good return policy
A Dye i5
or i4 are great masks. Again, preferences may vary. He might prefer goggles and separate lower face protection.
This might sound stupid and isn't really airsoft related, but I got a label maker and it's been awesome.
This mask is a common rental mask with added full head protection. Rental masks are notorious for being just bad masks. If you feel like you absolutely need a full head mask, go with a JT Flex-8 Headguard. This was my first mask and I still have it. I have i4s now but my friends use it when we play.
But seriously, if you don't absolutely need full head protection, don't get it. It looks kinda stupid, and it's hot and sticky. Not to mention more area to clean when you're done playing. Whatever you get though, get it with a thermal lens.
https://www.amazon.com/JT-SplatMaster-Z200-Shotgun-Red/dp/B0094KSYW8
I've found it's spring works well in mega blasters.
also part #88284 3/4 x 10-1/2 compression springs serve as a good upgrade to the marker.
Check review by darell mcneal
Empire Paintball 2 Pod Pouch
Link to the NcStar red dot.
The one I painted and used on my Stampede is an NcStar Tippmann Red Dot Sight with Weaver Base and is $9.95 on Amazon. It fit onto a Nerf rail without any modification.
And Zombona is right that sights are not terribly useful on Nerf, but they are neat looking. :-)
I got a sodastream and an adapter to use a paintball co2 tank in it.. works like a charm. I have a large tank also for my kegorator so I just fill the small bottle off the large one with a simple fill station.
https://www.amazon.com/Sellution-Paintball-Canister-Adapter-Conversion/dp/B00IAJZUIU
Comments on the other post say they're reballs, reusable plastic balls used for training. You're supposed to turn down the pressure so they don't do as much damage, which this guy didn't do i guess.
Wow, for the much just keep en eye out for a used Dye I4 mask or just get it new. All masks or even just goggles will affect aiming down sights and most will require a riser for the sight to see properly.
>please let me know if you know what the game is going to be like.
You will be starting on hard mode coming there, count on it. It's gonna be all the hvz vets from around the country showing up.
>Stryfe and reliability comments
First of all, get that thing squared away. NO stock wiring, NO stock motors, NO stock switches and NO 14500 cells allowed and don't even think about it being still stock in toy form. You will be playing a high stakes game and you will also have a lot of high end guns on the field as the status quo.
Motors- You can get Rhinos from Duke_Wintermaul and Containment Crew in the US or you can use Banshee 130 (check /u/foam_data post history, he links a fleabay listing recently).
Batteries, wire, connectors, chargers- Hobbyking
Switch- Omron V-214-1C6, buy from digikey.com
If you need tech help, feel free to bug me about it as much as you want, I have infinite patience for those who want to do stuff properly.
>can you plz link me tac gear you like and use(also affordable) in the comments
http://www.amazon.com/JT-Pod-Paintball-Harness-Black/dp/B00ERDEHT6 fits 4 mags, includes belt. That ought to be a good start.
Here you go my friend, enjoy your limitless seltzer!
Sellution CO2 Tank Paintball Canister Refill Adapter C02 Conversion - Polished Brass https://www.amazon.com/dp/B00IAJZUIU/ref=cm_sw_r_cp_apa_i_aMFRCbK33Q1V3
I've bought a mask already - I did a bunch of research (a lot on this sub) and quickly realized that should be the first thing I invested money into. Especially since I wear glasses - I won't have any fun if they won't fit under the mask. The first time I went out I bought one with thermal lenses that can be changed out. I don't remember the brand. But it fits my head perfectly and has only fogged up once. The rentals they had were nasty, quite frankly.
I've been poking around amazon and found this hopper. I've read that no matter the marker, an electric hopper is the way to go. This one seems to be a reasonable price and people seem to like it as well.
I suppose I should also add that my boyfriend and I are splitting the cost of that haul since there are two markers. Mostly. He's putting in 50 I'm putting in 75 - I'm taking to the sport more than him so I see myself using everything more. We've already talked about buying new tanks and feeders for it. And the field we go to rents tanks as well - which is great because that is still cheaper than renting all the gear.
Within the next 2-3 paycheck's I'll probably buy the GoG. I think I'm still going to throw down for this haul - I have a few friends that I could maybe drag along if I had the extra gear to help them out. Haha.
I know it's lame but I really like the look of the Tippmanns. I like the more rugged look than the sleek fancy contours of the GoG! But I once I get better I know I'm going to prefer something that performs well.
I'm working hard on my own design, but some shortcut notes (hopefully this helps, as I've purchased a dozen paintball hoppers, all of which was wasted money for the most part)!
https://www.amazon.com/Proto-Primo-Paintball-Loader-Hopper/dp/B0036FHJLE/ref=sr_1_1?ie=UTF8&qid=1480181082&sr=8-1&keywords=proto+hopper
https://www.amazon.com/Tippmann-Low-Profile-Cyclone-Hopper/dp/B000X04RJM/ref=sr_1_5?ie=UTF8&qid=1480181136&sr=8-5&keywords=tippmann+hopper
https://www.instagram.com/p/BNM7oA8DBP6/?taken-by=outofdarts
I've got a paintball tank with this cheapo regulator. I'll spend a bit more on a nicer one someday, but for now it gets the job done. The diffuser is a cheap glass one with a ceramic disk in it. A lot of the reviews mentioned it being overly fragile, but it's been a tough little sucker for me.
Thanks mate, really appreciate it. I am still on the fence about this helmet:
https://www.amazon.com/gp/product/B00083DEUM/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Mainly because of the horror stories some of my friends have told me who have gotten shot on the sides and back of their heads. Also the full helmet looks cool imo.
As for pants go (yikes!) definitely on the pricier side of gear. But I'm sure they're worth the investment.
Now I need to find a solid pair of cleats. Getting into paintball has been quite the investment ;)
I leave min plugged in, but cover it in this paintball mask bag. It's a little tight, but covers well enough. https://smile.amazon.com/gp/product/B00OKTVLG4/
I used Amazon gloves
,Mask
I wish I took more pictures of the process :-/ but I'll try to put that together with some Internet pics.
Basically I got cheap goalie mask as the base and cannibalized an old paintball mask. That's not the actual one, one I had came free with gear, really cheapy. Last thing I got were these steam punk goggles. I know there were cheaper ones; I think I only paid $12 for 'em.
SO I got all my pieces and held them in place with duct tape. Then paper mache, paint, and lacquer to keep everything on. Goggles were the most expensive part because I happened to have the pb mask laying around. Could have done it cheaper but I felt the green lenses REALLY pulled it together.
You would rather get these if your really keen on getting a mask that fully covers your head. It is a bit more pricey, but it is worth it since it will be very comfortable and is a cousin to one of the most reputable googles in paintball, the JT Proflex.
This is the nozzle I use.
The container I use is the JT 20 oz which I got from the local Dicks store but this Empire one on Amazon should also work.
From what I have seen, for a Carbon Fiber tank that runs in this size, the closest thing to your price point is probably Empire's. It's $140 (a little over your request), but still pretty good.
https://www.amazon.com/dp/B0052F61TW/ref=cm_sw_r_cp_apa_crtMBb9ZME44V
You can frequently find them in thrift stores too. And get an adapter to put in a paintball co2 tank. That's what I did.
The sodastream itself was $1 at my local thrift store. It costs ~$5 to fill the tank and it lasts for forever.
Here is the desktop version of your link
Here is a cheap paintball pod pouch that I use for magazine storage. It holds two 18-rnds per pocket, four total. It just has simple belt loops, and it comes with its own belt with a plastic buckle. Simple, but it works well enough for me. The pouches are a little tight, you might have to practice reloading quickly with them, because if you're not careful they can get snagged.
Here's a 3-pocket variant, I don't have this one but I assume it would hold 6 mags just fine
https://www.amazon.com/Tippmann-3000-HPA-Tank-Black/dp/B00885XHIG
something like this would be great. you can rent them as well but in the long run this will be better
They come in 30 and 90 PSI max, you'll want the former for better dialing in or the latter if you need to force carb. Depending on which you get, you'll need to adapt to 3/8" or 5/8" UNF. If yours didn't come with one, see these guys.
Get a check valve.
I use these in UCP for both paintball and Nerf. They hold 2 pods or 4x18's perfectly, and will close, albeit barely, over the 18's. Academy sports has them for ~$12.
Here is what I'm getting him for eye protection.
Well it goes like this: a marker can only perform as well/quickly as it can get air and paint, so you always want to have your loader and tank outperform your marker, and never have your marker outperform your loader/tank.
Basically, if you think you're going to stick with it, I'd recommend spending a little more. If you can up your budget for marker/tank/loader to about $350, you'd be in business and wouldn't need to upgrade for a while.
Try and find a used loader such as an Invert Halo Too, Empire Prophecy Z2, or Dye Rotor in the $50-75 range.
A tank, you're probably going to be able to find some 45-50 ci or 68 ci 4500 psi tanks for $80. There is a link in r/paintball right now for an Empire 68ci/4500psi tank brand new on Amazon for $105, too, and that would be good for ~5 years.
Now let's call it $200 left over for a marker. You could easily find a used Invert Mini for that price, which is a marker perfectly capable of holding it's own at any level. Also, that puts you in range for Proto Rail (aka PMR) markers from 2010-2012, some Proto M7s (a great marker!), or a first-gen Planet Eclipse Geo, or a used Etek3 (keep in mind these would all be used at that price, but it's always better to buy a cheaper used marker than to buy a new marker and continually be upgrading, because that would ultimately cost more).
I'm sure I left out some points, so I'll edit as I think of them, but feel free to ask any other questions.
EDIT: look thru all the PbNation B/S/T sections too. There are always good deals
I went ahead and purchased the stuff below. I think this will be good for casual play.
Gun https://www.amazon.com/gp/product/B00C2NH25O/ref=od_aui_detailpages01?ie=UTF8&psc=1
Red Dot
https://www.amazon.com/gp/product/B01HPWATOC/ref=od_aui_detailpages01?ie=UTF8&psc=1
Hopper
https://www.amazon.com/gp/product/B0036FHJLE/ref=od_aui_detailpages01?ie=UTF8&psc=1
Here you go...select the 68/4500 option. http://www.amazon.com/gp/aw/d/B0052F61TW?cache=1194adf48645468e61b80647889779da&pi=SY200_QL40&qid=1411234192&sr=8-3#ref=mp_s_a_1_3
I stuff it in one of these
https://www.amazon.com/gp/product/B009YZT15C
These hold 4x buzzbee 20s and elite mags pretty well. You have to cut the flaps off to use with 18/20s, they're not long enough.
It can be a tight fit though for non-buzzbee mags (elite style without rounded edges), wearing them in helps, and probably your seam cut idea, but I never had to do that. Worker 22s won't fit 4 (can only fit 2 in total).
I bought this paintball mask bag based on a recommendation from this sub. It fits the rift perfectly and keeps dust and light out while it sits on my desk.
This beaut
These are probably outside of your pricerange, considering the cost of the gun, but they're the best full facemask that you can buy.
Here you are! https://www.amazon.com/gp/product/B01F42XK6Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
If you want a custom sheet check out these guys, although it's going to cost you a lot more than $30 :'(
http://www.wildecustomgear.com/store/molle-safe-panel-organizer
MOLLE system (MOdular Lightweight Load-carrying Equipment) is standard military mounting system, can be rigid or cloth. https://www.amazon.com/gp/aw/d/B01F42XK6Y/ref=pd_aw_sim_200_of_59?ie=UTF8&psc=1&refRID=JQ0Q76FMXZ37MNEFGN8Q
Here is the mobile version of your link
15 of these to Janine.
Another package drifts down to her. Inside are 15 of these, along with a note.
"Have fun, keep out of reach of children, not edible. ~Arden"
Empire Helix Goggle Thermal Lens - Black Header https://www.amazon.com/dp/B00M9HWOBA/ref=cm_sw_r_cp_apa_ejYozb2253B6A
My set-up:
U.P. Aqua Simple Regulator
http://www.amazon.com/U-P-Aqua-UA-148-Simple-Regulator/dp/B005VS1GD6?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Interstate Pneumatics WRCO2-5A4 CO2 Paintball Tank CGA 320 Adapter
http://www.amazon.com/Interstate-Pneumatics-WRCO2-5A4-Paintball-Adapter/dp/B00I2UMZ2Q?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Empire Aluminum CO2 Paintball Tank
http://www.amazon.com/Pure-Energy-40020-Empire-20oz/dp/B0008G2WAW?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Personally I would go for this hopper in the link below. It’s pretty much the go to pump hopper. A 45/4500 tank is usually the tank of choice. You can get away with a tiny little 13ci if you want but I prefer the 45 so I don’t have to fill up between every game and if I’m at a big scenario game I know I won’t run out of air. The 45ci also fits my shoulder much better.
https://www.amazon.com/Allen-Paintball-Products-Feeder-Hopper/dp/B00BM8FMHU/ref=sr_1_92?keywords=Gravity+hopper&qid=1568597998&s=gateway&sr=8-92
Thanks. That's what I'm thinking too. I mean, what could be really be inside a metal tank?
Which model do you have? I'd like to find the largest one that will fit within the casing of the Source with the door/cover if possible. Also is the Amazon pricing good, or could I get a better price from a sporting goods store?
https://www.amazon.com/Tippmann-3000-HPA-Tank-Black/dp/B00885XHIG
Maybe a MOLLE board like this?
Kind of doubt how well it works, but maybe somethign similar to this and ear plugs?
If you really need results then invest in this.
Paint grenades could also be fun before hitting him with flour or glitter. Just to annoy.
A yeti-style container with super ice cold water could stun him pretty well too :)
Yes that's the one. I bought this adapter https://www.amazon.com/Interstate-Pneumatics-WRCO2-320-38-Paintball-Disposable/dp/B072XNYS5B/ref=sr_1_7?keywords=paintball+adapter+disposable+co2&qid=1556109593&s=gateway&sr=8-7 but I haven't had to use it yet since the original co2 canister hasn't run out yet. I've only been using the setup about 3 weeks.
I am thinking something like this .. but filled with rotten butter.
https://www.amazon.com/Empire-Paintball-Paint-Grenade-Yellow/dp/B002THLQXC/ref=pd_sim_200_1?_encoding=UTF8&pd_rd_i=B002THLQXC&pd_rd_r=MAKVRS8296243C4WYRSY&pd_rd_w=0lyEt&pd_rd_wg=FfTn5&psc=1&refRID=MAKVRS8296243C4WYRSY
If you're looking for just the gun, A TMC will be your best bet. If you also want some other equipment here are some links.
This is a molle vest that also comes with pouches
GZ XINXING Black Tactical Airsoft Paintball Vest (Black) https://www.amazon.com/dp/B077P7GC76/ref=cm_sw_r_cp_apa_i_-8jPDb57S6RNT
I would also recommend a dump pouch so you don't lose any mags in fast reload situations.
Warrior Quest 1000D Nylon Folding Tactical Dump Pouch - Foldable Molle Magazine Mag Dump Pouch (Black) https://www.amazon.com/dp/B076H97B14/ref=cm_sw_r_cp_apa_i_f-jPDbXKJ4AEA
Depending on how much paint you shoot your going to want a tank. I use a 13ci 3000 on my TMC and I can get about 5 mags before I'm out.
HK Army Aluminum HPA Tank - 13/3000 https://www.amazon.com/dp/B07MH4XJM7/ref=cm_sw_r_cp_apa_i_c.jPDb07B4QAK
You don't need to splurge on anything dance when it comes to the gun. However, YOU NEED A GOOD MASK.
Here's the mask that I use. It's wallet friendly and hasn't fogged up on me once.
Empire Helix Goggle Thermal Lens - Black Header https://www.amazon.com/dp/B00M9HWOBA/ref=cm_sw_r_cp_apa_i_sakPDb62F98GB
All of these items I personally use myself, and all of my loadoat costed me about 350-400 bucks.
https://www.amazon.com/Empire-Paintball-X-Ray-Single-Goggle/dp/B0014UWJJ0/ref=sr_1_1?ie=UTF8&qid=1480818101&sr=8-1&keywords=empire+xray
Not that one. This one!
Allen Paintball Products Sight Feeder Hopper - Black - 50 Round https://www.amazon.com/dp/B00BM8FMHU/ref=cm_sw_r_cp_apa_BZXyybBPNF4PY
https://www.amazon.com/Tippmann-H-01-Deluxe-Remote-Line/dp/B000KWWRRW/ref=pd_bxgy_img_2/141-2925560-1676544?_encoding=UTF8&pd_rd_i=B000KWWRRW&pd_rd_r=714fe37c-e924-49b3-a5b0-3e331436fccc&pd_rd_w=xk7NJ&pd_rd_wg=B7VHf&pf_rd_p=a2006322-0bc0-4db9-a08e-d168c18ce6f0&pf_rd_r=3RPMSPDS15F86CD1Q2F7&psc=1&refRID=3RPMSPDS15F86CD1Q2F7
​
https://www.amazon.com/Tippmann-3000-HPA-Tank-Black/dp/B00885XHIG
oooh I'm a fan of the salvo, my favorite non magfed marker, so I'm going to assume you aren't running the tippmann magfed adapter or the deadcell tippman magfed adapter, which, if you want a magfed salvo, go with the deadcell version, but, assuming you are hopper fed, definitely grab a Proto Primo, they're easily the best gravity fed hopper on the market. Also, everyone is going to tell you this but for good reason, if you don't already, get an anti-fog mask.
Also, if you were looking for some sort of scope, I'll tell you what I tell everyone, a red dot wont do anymore good than iron sights unless you're using first strikes. NCStar makes a cheap red dot that I had on my 98 if you want to dabble in them.
Take good care of that marker, it's essentially a 98c in an arguably tougher, milsim body, take good care of it and it will last forever, I still have my 98 from 8 years ago and it's still shooting like the day it came out of the box.
Any marker is the best marker in the world if you enjoy playing with it, keep on shooting!
EDIT: also, since the salvo has the quad rail, idk how you grip the marker, but I'm a big fan of angled foregrips, only reason I don't have one is because I'm a bigger fan of gripping the magwell, also, should you want to get another marker at some point, anything with picatinny rails will accept a grip.
You'd be much happier with the APP Sight Feeder. The Tac50 is more form over function whereas the Sight Feeder is a more tried & true design.
Or this
https://www.amazon.com/dp/B002THLQXC/ref=cm_sw_r_sms_apa_JAevxb3635YA1
yes like this but only in .50, they are marketed as "low impact" they don't shoot very far but they work well enough. you can put a bunch of kids on a speedball field with them and they won't hurt each other.
$10 Regulators from eBay? The ones I've seen have 1+ month shipping estimates... I'm so spoiled by Amazon.
How well would these items work?
> just want something that I can play with my friends in our backyards (it's huge so don't worry).
Check OP's post
> Paintball is much more expensive than airsoft
https://www.amazon.com/JT-SplatMaster-Z200-Shotgun-Red/dp/B0094KSYW8/ref=sr_1_7?ie=UTF8&qid=1503283439&sr=8-7&keywords=paintball+pump+gun
> nerf is just cringe worthy
Not really, it's a mater of your opinion and perspective.