Best plant heating mats according to redditors
We found 192 Reddit comments discussing the best plant heating mats. We ranked the 33 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 192 Reddit comments discussing the best plant heating mats. We ranked the 33 resulting products by number of redditors who mentioned them. Here are the top 20.
Thermostat for the UTH (under tank heater)! That's a BIG MUST for a UTH. Temps that are too high can cause burns and neurological issues (aka brain damage). You can get one relatively cheap. The one I use is here iPower Digital Heat Mat Thermostat
Good luck, you choose the right pet!🐍 Hisss!
Temp Controller
https://www.amazon.com/dp/B011296704/ref=cm_sw_r_cp_api_dYnVAb99AN5JX
Humidity Controller
https://www.amazon.com/dp/B01FQKXRXA/ref=cm_sw_r_cp_api_3YnVAbW8V1DHG
DeHumidifier
https://www.amazon.com/dp/B000H0ZDD2/ref=cm_sw_r_cp_api_SZnVAbTSHMSQT
Humidifier
https://www.amazon.com/dp/B01D0POS7W/ref=cm_sw_r_cp_api_m0nVAbD00AGKP
Small Fan (on a timer, runs for 30 minutes every 2 hours or so)
https://www.amazon.com/dp/B00WM7TRTY/ref=cm_sw_r_cp_api_V0nVAb8XD3K7Q
Heater
https://www.amazon.com/dp/B00P7U259C/ref=cm_sw_r_cp_api_E1nVAbC6R49Z3
I got an old fridge on Craigslist for $25 that I thought was a small personal fridge but turned out to be about 6 cubic feet (perfect for hanging). I’m not sure of the brand actually (maybe Kenmore). So far I’ve done a Bresaola and a Copa, both have turned out great!
How expensive do you want to go?
For $16 you can get a bare bones basic thermostat on amazon. https://www.amazon.com/OPULENT-SYSTEMS-Controller-Germination-Temperature/dp/B07R76NT3R/ref=sr_1_9?crid=1GT1G5ZH84TEQ&keywords=thermostat+for+reptiles&qid=1571561915&sprefix=thermostat+for+%2Caps%2C183&sr=8-9
Or you can go up to $140 for a Herpstat from Spyder Robotics. https://www.spyderrobotics.com/index.php?main_page=product_info&products_id=25
And everything in between.
These heat mats are meant to be used with a device which monitors the temperature and then controlls the amount of current running through them. Like this.
That being said, it shouldn't get to the point where it's melting itself.
I just got a young Leopard Gecko about a week and a half ago. He was eating consistently up until 3 days ago. I have him in a 30 inch 20 gallon tank with a Zoo-Med under tank heater + coconut fiber.
I was using a red 100 watt heat light for the first week, but realized that was probably overkill. I now have a 12 watt white UVB light in there, but the temperatures haven't managed to stay consistent like they had. I think that's why he's not eating?
I purchased a heat mat thermostat ( https://www.amazon.com/dp/B07LBGWMV9/ref=cm_sw_r_cp_awdb_t1_poPIDb1DAT35P ) but despite setting it to 90-94, I haven't gotten a temperature reading above 80 Fahrenheit. The day after I made the change, he started ignoring any mealworms or crickets I stuck in his tank.
Should I buy a new thermostat or higher output white light? Does he just need more time to adjust? His tail is thinning a bit and it has me worried. Thank you guys in advanced, this is my first lizard and I want to make sure it has the best life it can
The Inkbird has two outlets - one for heating one for cooling. The freezer plugs into the cooling outlet, and you can plug a small heat source into the warm side and put that inside the freezer. I use a seedling mat: https://www.amazon.com/Apollo-Horticulture-Seedling-Propagation-Cloning/dp/B00S1VJ0OC/ref=sr_1_3?ie=UTF8&qid=1494277988&sr=8-3&keywords=seed+mat
In a small enclosed and insulated space, a tiny heat source like that can bring ambient temperature up 20 - 30 degrees.
This is the setup I use (with a used mini-fridge, not a freezer) and I've got year-round stable temperature for about $100 bucks.
You can buy a used full sized fridge for 50-100 dollars.
Get this temp controller: https://www.amazon.com/Inkbird-Itc-308-Temperature-Controller-Thermostat/dp/B01MDSWXY4/ref=sr_1_3?ie=UTF8&qid=1486504898&sr=8-3&keywords=inkbird
Get a seed heating pad.
https://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C/ref=sr_1_1?ie=UTF8&qid=1486504921&sr=8-1&keywords=seed+heating+pad
If you look at the temp controller you will note it has a plug for hot and cold, plus a temp prob. Install seed page on side of firdge. Plug temp controller into wall, plug fridge into cold plug, and seed pad in hot plug, set temps and you should be good to go.
Great! Looking forward to seeing your new buddy. :)
So, carpet pythons are a tropical species, and as such do require specific temperature ranges and humidity levels. Ideally, it should be about 33c on the warm side, and 22c on the cool side. Normally, people control temperature with thermostats. You put the temperature probe above the heater, inside the warm side's hide, and set the temperature you want it to maintain. Bam - instant temperature control!
The next thing you'll want to do is invest in a digital thermometer and hygrometer combo, ideally something with probes that you can place around the vivarium. This will let you double check temps and humidity around the viv. Long term, the thermostat can measure the warm side and your thermometer/hygrometer can measure it on the cool side.
For humidity, you should be aiming for like 50% - 80%. The hygrometer part of your thermometer/hygrometer measures the humidity level. Grab yourself a spray bottle, fill it with water, and give the viv a good misting when humidity levels get too low.
I'd recommend googling "carpet python care" and reading the entire first page of results. There's a lot of great information from a number of knowledgeable keepers there, and it'll help you figure out which suggestions are actually good, and which ones don't make sense.
Do you mind if I ask what country you live in? Sounds like it probably isn't the US (where I'm from)
Started germinating seeds Feb. 24th using two 45W LED grow lights and some plastic pots. I encapsulated half of a Costco garage storage shelf and mounted the lights to a 1x6 for easy height adjustment. The plants sit on two seedling heat mats and lights run 16 hours/day. Here is a list and picture of Group C at one week.
I bought this one a few years ago and it's still going strong. You could fit 16 cups on it
https://www.amazon.com/dp/B00P7U259C/ref=cm_sw_r_cp_apa_OWEJAbTXMH5TE
I use heating strips — hard to tell in the pic. I’ve got black fabric headbands around them to cover the big green text printed around the outside of them ‘cause it bugged me haha. I have the three strips plugged into an extension cord which is plugged into an Inkbird digital thermostat (probably not 100% safe, but I wasn’t buying 3 thermostats haha). I have the probe taped to the outside of the middle jar (since I don’t like the idea of leaving it submerged in the brew). Heat strips: here ; thermostat here
iPower 40-108 Degrees Fahrenheit... https://www.amazon.com/dp/B01E9IO6N0?ref=ppx_pop_mob_ap_share
Put it on the bottom, just make sure you have a thermostat like this one, with the probe wherever the gecko will be laying above the heating pad. If you use reptile carpet, put it on top of the reptile carpet. Paper towel? On top of the paper towel. Your gecko will be fine as long as you haven't bent the heating pad and it doesn't have any defects. The thermostat would prevent that area from going over temp anyways.
I would recommend starting with a jar like this;
https://www.amazon.com/1-gallon-USDA-Fermentation-Glass-Jar/dp/B006ZRBGSC/ref=sr_1_8?ie=UTF8&qid=1524584912&sr=8-8&keywords=kombucha+1+gallon+jar
You won't need the top; however, it's nice to store for later use of the jar.
Add to that a standard coffee filter and an elastic to keep it on the jar.
It has a 1 gallon volume so you can follow the subreddits suggestion for a master recipe;
https://www.reddit.com/r/Kombucha/comments/5b1ztm/reddit_master_kombucha_recipe/
If it tends to be cold where you are < 75 F ambient temperature you may want to consider also snagging one of these;
https://www.amazon.com/VIVOSUN-Waterproof-Hydroponic-Fermentation-Germination/dp/B073PTZCJ4/ref=sr_1_4?ie=UTF8&amp;qid=1524584986&amp;sr=8-4&amp;keywords=kombucha+heater
If you are sourcing something used, please be sure to know what was in it before and clean it appropriately and then rinse it to insure no antibacterial or other cleaner residues reside, which could hinder the yeast and or bacteria from thriving.
Many folks prefer to have more surface area for the pelical to grow and find that it speeds up the over all process along with having appropriate temperatures.
Good luck!
You've got good advice already - thermostat to safely regulate the cage heat (a cheap one like this works), a cool side hide, a warm side hide, lots of clutter (wood, fake plants, etc.) around the cage so your snake can feel securely "hidden" even while not in a hide, and a hygrometer & thermometer (like this one) so you can keep an eye on the cage temperature and humidity. <- (proper humidity is important for ball pythons so they can shed well and so they don't get dehydrated)
For a retained eyecap you can try the old warm-damp-towel-in-a-pillowcase trick: wet a towel with warm water, squeeze it out so it's not sopping wet, drop it in a pillowcase, add your snake, tie closed, and let your snake slither around in there for 15-30 minutes or so. The warmth, moisture, and gentle friction from the towel can loosen stuck shed.
Edit: fixed the links.
you don't use heat lamps with tubs. you can put one on some sort of stand in the general viscinity of the tub to raise the room temperature of that area, but there's no practical way to use a lamp more directly on the tub.
the usual air hole placement is along the walls of the tub. how many you need will depend on a few factors, so it's best to start with a lower number and drill more if needed.
i have one of my BPs in a tub while she waits for her pvc cage. here is the only photo i have of the tub right now. the basic rundown is:
Try one of these! I've got one for my warm growing orchids.
https://www.amazon.com/dp/B00P7U259C/ref=cm_sw_r_cp_apa_bGJZBbA897Y1K
First of all - if you are building this kit from disparate parts and sending along - you are a killer Secret Santa. Secondly, I would go soilless if gifting, there is this stuff which needs to be soaked, but keeps the indoor grow clean, and is helpful if your recipient is in a high rise or somewhere else that soil isn't easily accessible. I might also consider sending one of these in case they are germinating in a basement or somewhere cold. I use this seed company and have yet to be disappointed by price or quality - that salad mix is my favorite general purpose green too.
Seedling heat mats like this one are usually enough to do the trick if you put it on the shelf in a cabinet and place your ferments on top,.
Two changes - folks always want a thermostat. This thermostat is the same as the HydroFarm stat /u/_ataraxia mentioned, and is a good low end/entry level stat. It's literally the same exact piece of hardware with a different label. Most of my enclosures are on Herpstat thermostats with proportional control. These are sort of the high end of stand-alone thermostats. Some people have also gone on the more computerized, high tech route. If that's interesting to you, it works great, but it's definitely not necessary.
On/off thermostats are actually not suitable for light bulbs, because the bulb will go on and off all the time, sort of strobing. It's fine for non-light emitting heat sources like ceramic heaters and radiant heat panels, although proportional are still more accurate.
I’ve been using these [seedling heating pads](VIVOSUN Durable Waterproof Seedling Heat Mat Warm Hydroponic Heating Pad 3'' x 20" for Kombucha Tea & Beer Brewing, Fermentation, Seedlings & Plant Germination https://www.amazon.com/dp/B073PTZCJ4/ref=cm_sw_r_cp_api_i_Lfn8AbDNHSQ89 ) with great success the last 4 months. I wrap them around my 1F jars
I use this [temperature controller with sensor](VIVOSUN Digital Seedling Heat Mat Thermostat Controller 68-108℉ https://www.amazon.com/dp/B015F4VFGI?ref=yo_pop_ma_swf) to control them
It's this guy. It's been working well--I check on it a couple of times a day and adjust the towel as needed to keep it right at 76.
>I've read that big enclosures for small noodles makes them feel unsafe
You can put a tiny snake in it's own mansion sized fine, as long as there is plenty of places to hide. Just think, are baby snakes stuck in 10 gallon tanks in the wild until they grow up? Snakes hate open spaces, not large ones.
I use aspen for my Western hognose. He loves it. It holds burrows really well, and I try to reset all his burrows every couple weeks or so to keep it interesting for him. I have mine in a 10 gallon tank since I have a male. I have about 6" of aspen in the tank.
Yes, a thermostat is absolutely needed. Heat pads can reach high levels, that would be dangerous for the snake. I use these for all my snakes. They work great and are cheap.
A western hognose was my first snake (now I have more). He's a bugger. He'll hiss and puff up inside his tank but once you get him out he's fine. He's gone off food for a few months at a time a couple times now, so he was definately stressful for a first snake (for me). It also didn't help that he loved to burrow (duh), and I'd worry about him since I couldn't see him. Good first snake IMO though, love the little guy and he has taught me a lot.
Best of luck and post pictures once you get them!
https://www.amazon.com/gp/product/B00WJNVPZU/ref=oh_aui_detailpage_o07_s01?ie=UTF8&amp;psc=1 https://www.amazon.com/gp/product/B01BOY6Y2I/ref=oh_aui_detailpage_o07_s01?ie=UTF8&amp;psc=1 https://www.amazon.com/gp/product/B015ZXUSX0/ref=oh_aui_detailpage_o06_s00?ie=UTF8&amp;psc=1 https://www.amazon.com/gp/product/B015F4VFGI/ref=oh_aui_detailpage_o07_s00?ie=UTF8&amp;psc=1
I just threw this one on my jar two evenings ago - https://www.amazon.com/dp/B01ETRWSI6/ref=cm_sw_r_cp_apip_BtkPCroPGxTDN
My brew wouldn't get above 70 on its own, so I purchase this warmer. It's keeping my brew around 82-84, but I can't control the heat level.
I'm also unsure if the temperature reading is reflective of the actual liquid temperature or the temperature of the glass since the warmer is being applied to the temperature gage.
I'm assuming the internal temperature of the liquid is less than the reading suggests, being that it is much easier to heat the glass vs. heating the contents of the jar.
I'd be curious to hear if anyone has experience with this warmer. I'm open to tips and tricks.
Edit: Spelling
Check this out at Amazon.com
VIVOSUN Durable Waterproof Seedling Heat Mat Warm Hydroponic Heating Pad 10" x 20.75" MET Standard https://www.amazon.com/dp/B00P7U259C?ref=yo_pop_ma_swf
No problem!
Word of advice - if you want two heat mats with the thermometer regulator, best to buy one with the thermometer regulator and one without. It's weird, but it comes out a little cheaper than buying the 2 mats and then the thermometer regulator.
This one I believe VIVOSUN Durable Waterproof Seedling Heat Mat Warm Hydroponic Heating Pad 10" x 20.75" MET Standard https://www.amazon.com/dp/B00P7U259C/ref=cm_sw_r_cp_api_G2iGAbNX4088J
What kind of temps are you dealing with? A couple large heat pads should be enough to raise it ~10degF
Yeah, no problem. This is the one I got:
http://www.amazon.com/Hydrofarm-MT10006--19-1-2-Inch-Seedling/dp/B0001WV010/ref=sr_1_1?ie=UTF8&amp;qid=1462474751&amp;sr=8-1&amp;keywords=heat+mat
This one is much cheaper but seems pretty good too. It was not available when I got mine about 2 years ago.
http://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C/ref=sr_1_3?ie=UTF8&amp;qid=1462474751&amp;sr=8-3&amp;keywords=heat+mat
I recommend a seedling heat mat. They provide gentle heat and are water-resistant.
For example:
https://smile.amazon.com/VIVOSUN-Waterproof-Seedling-Hydroponic-Standard/dp/B00P7U259C/ref=sr_1_3?keywords=seedling+heater&amp;qid=1564026672&amp;s=gateway&amp;sr=8-3
This won't provide enough heat if you are trying to get a kveik to 100F, but it's good to boost something into the 70s.
Okay, look for a thermostat . This will control the temp and it’s very, very easy to use. Please, this is very important. You can cause severe burns and even kill the gecko. I would try to find a dimming thermostat. I know it’s an investment but it is 100% necessary.
I have these two grow lights: Ferry Morse and DuroLux
No heat may but was looking into getting this one
It seems that your comment contains 1 or more links that are hard to tap for mobile users.
I will extend those so they're easier for our sausage fingers to click!
Here is link number 1 - Previous text "one"
----
^Please ^PM ^/u/eganwall ^with ^issues ^or ^feedback! ^| ^Delete
I got one off amazon with a temperature controller, was a bit more expensive than just the pad, but since I needed to be sure the seeds germinated I didnt mind. https://www.amazon.ca/VIVOSUN-x20-75-Seedling-Digital-Thermostat/dp/B016MKY7C8/ref=mp_s_a_1_6?keywords=heat+mat+thermostat&amp;qid=1568954250&amp;sprefix=heat+mat&amp;sr=8-6
I use a seedling heat mat, similar to one of the fermentation belts but half the price. I have 5 of them and haven't run into any issues with them yet. Paired with an inkbird I'm able to keep the carboys in my garage at about 68 even when it gets down into the 40's.
On mobile, hope this works correctly. This is what we use for seedlings: Light and mat
I want to build an indoor basement grow room so we can grow throughout the winter but that requires serious lighting, temp, and air control.
They sell that same mat with a temp controller. I rubber banded the mat around my kombucha fermenter and taped the temp probe to the opposite side. Works well.
https://www.amazon.com/VIVOSUN-Seedling-Digital-Thermostat-Combo/dp/B016MKY7C8/ref=sr_1_3?ie=UTF8&amp;qid=1486574400&amp;sr=8-3
https://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C/ref=sr_1_3?ie=UTF8&amp;qid=1486567412&amp;sr=8-3&amp;keywords=seed+heat+mat
That plus an ITC-308 to control the temperature and an old blanket will do you just fine.
You can get a heat mat like this one - they're often sold for germination trays but many plants love them. Strongly recommend picking up a thermostat to go with it so you can better control the temp.
Get one of these seedling mats: https://www.amazon.com/VIVOSUN-Waterproof-Seedling-Hydroponic-Standard/dp/B00P7U259C?keywords=seedling+mat&qid=1539186589&sr=8-1-spons&ref=sr_1_1_sspa&psc=1 They're cheap and you can tape them to your fermenter, some even have thermostats.
You don't need a "night light", you want your snake to have darkness at night. Light and heat should be from two separate sources, and make sure your heat source is always controlled by a thermostat. If your room does not receive ambient lighting from a window, etc. you can use something as simple as a clamp lamp with an led light bulb screwed into it, plugged into an outlet timer. As long as the light is not overly bright (grow lights or aquarium fixtures can be too bright) and your snake has a place(s) to seek shelter this will work fine.
I am a huge fan of these thermostats. I have three for my snake's viv-- one dangling under the heat lamp at the point she could slither to, one against the glass where the heat mat for the warm side is, and one against the glass where the heat mat for the cool side is (my house runs too cold, so I keep lamp+mat for the warm side both set to one temp, and mat on cool side set to a lower temp).
Propagate Pro Seedling Heating... https://www.amazon.com/dp/B07MM6BZK7?ref=ppx_pop_mob_ap_share
I tend to keep my apartment around 70F, which wasn't enough to keep my starter decently active. I bought a seed germination mat with a thermostat and put it in a plastic storage bin. Works great to keep my starter temp consistent and doubles as a proofing bin when I'm baking.
It's not a kit, but something I made. These lights in a crappy light greenhouse like this wrapped in mylar sheets and the seed level has this heating mat.
I wouldn't put too much stock into anything you read on yahoo answers. I've used CHEs for a number of years without issue. Depending on the wattage, I've measured over 500 degrees on the surface of the CHE but ceramics can withstand extremely high temperatures. A defective CHE with a bubble in the material could easily explode and I'm sure it happens but it seems rare. If you are concerned, there are very reliable and affordable thermostats available online. Just make sure you are using a light fixture with a ceramic socket so it can withstand the heat of the CHE. These are the fixtures and thermostats I've used with CHEs and UTHs.
https://www.amazon.com/Zoo-Med-Wire-Cage-Clamp/dp/B0002DIWVO/ref=sr_1_3?ie=UTF8&qid=1536344685&sr=8-3&keywords=wire+clamp+lamp
https://www.amazon.com/gp/product/B01E9IO6N0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B000NZZG3S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
&#x200B;
My first thought is a Reptile heater or Plant Heating Mats. Then you need a Thermostat Controller
I got this one recently. I live in Alberta, Canada and the temperature had dropped quite a bit. My house is normally at a 12°C. With the seedling mat, my kombucha sits at a 28°C.
https://www.amazon.ca/dp/B073F33ZRD/ref=cm_sw_r_cp_apa_i_qx9RDbP8TCPDG
https://www.amazon.com/VIVOSUN-Seedling-Digital-Thermostat-Standard/dp/B016MKY7C8/ref=zg_bs_14252891_3?_encoding=UTF8&amp;psc=1&amp;refRID=2DHNSWK6XBQBWV7NQVKW
These seedling mats worked perfect for me in winter
okay, so there's another culprit here. Temperature swing can definitely cause some things. You have one of those heat mats? I use a setup like this. My jar is down in a 5kg keg I got from some chemicals for my lab. [Flavor chemicals]
https://www.amazon.com/VIVOSUN-Seedling-Digital-Thermostat-Standard/dp/B016MKY7C8/ref=sr_1_1_sspa?keywords=heat+mat+and+thermostat&qid=1572988692&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExSUY5U0hYMTBUM0ZCJmVuY3J5cHRlZElkPUEwNjQwNTgxMThVVVI1Q1NTNEc1SiZlbmNyeXB0ZWRBZElkPUEwNTU1NTY1MVZCSFUxSkVRTFBSJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
I use this thermometer and put it at the very beginning of his cool end/toward the middle of his tank. https://www.amazon.com/dp/B072XHJLFD/ref=cm_sw_r_cp_api_i_ucoYDbZK5D6HA
There are more expensive ones that are reptile specific out there, but this has never failed me. Just be sure you have a stat for each heat source and have the probes positioned appropriately https://www.amazon.com/dp/B01E9IO6N0/ref=cm_sw_r_cp_api_i_EdoYDbE9C22BR
Also might be worth getting a temp gun. They’re accurate and can give you exact readings for spots they hang out most.
https://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C/ref=pd_lpo_0_bs_tr_t_2?_encoding=UTF8&amp;psc=1&amp;refRID=7TZVC4BGFQDZVN0HQVPS - try a heating pad.
How cold does it get?
When I bought this it was $17: the digital heat sensors
https://www.amazon.com/VIVOSUN-Digital-Seedling-Thermostat-Controller/dp/B015F4VFGI/ref=pd_bxgy_86_2?_encoding=UTF8&amp;pd_rd_i=B015F4VFGI&amp;pd_rd_r=1HCKJXJJBBV0NW2W1AYK&amp;pd_rd_w=fJNYN&amp;pd_rd_wg=iKA5l&amp;psc=1&amp;refRID=1HCKJXJJBBV0NW2W1AYK
Here is the heat pad, it is always on full blast (you put it under the tray and the heat goes up, and put the heat sensor at the top so when the thing is fully heated, it turns off) :
https://www.amazon.com/Plant-Babies-Heating-Waterproof-Seedling/dp/B013HFKRMK/ref=pd_sim_86_3?_encoding=UTF8&amp;pd_rd_i=B013HFKRMK&amp;pd_rd_r=1HCKJXJJBBV0NW2W1AYK&amp;pd_rd_w=152tJ&amp;pd_rd_wg=iKA5l&amp;psc=1&amp;refRID=1HCKJXJJBBV0NW2W1AYK
Or you can use this programmable controller the head:
https://www.amazon.com/bayite-Fahrenheit-Digital-Temperature-Controller/dp/B011VGASLW/ref=sr_1_5?s=hi&amp;ie=UTF8&amp;qid=1481436370&amp;sr=1-5&amp;keywords=digital+heat+switch
But you have to do some wiring (outlet cord, and wire an outlet) and you have to read up on how to program it
I use the programmable timer for Quail and the timer above in the first link for grow trays/starts. Either combination should work. Can you post pictures of your worm farm? Thanks
I have this guy. Don't even need to wrap the fermenter, just keep the pad in the chamber.
http://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C
I have never used a thermostat with it, they do well between 90-95 degrees and those mats are designed to be 100 degrees and then go thru the bottom of the tote and then float up....so they can regulate their temps.
this is the mat I got
http://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C/ref=sr_1_2?ie=UTF8&amp;qid=1452659199&amp;sr=8-2&amp;keywords=heat+mat
I use a fair bit of blankets and a plant germinating mat with a temp probe. I think I paid 20-30$ for that mat, and blankets/towels from a second-hand store. If the room is cold enough, you shouldn't need a freezer. It will be less effective but much cheaper. Something like this, mat not included.
Hi,
Caveats to below:
Interesting you bring up glass...I used a Walmart 2 gallon glass jar for months (no problems with mold due to use of grow mat with thermostat...at least this is why I think I did not have mold) and decided I like continuous brew (had this going in a 2.5 gall glass lemonade dispenser seperately) So I went to kombucha Kamp to see what they were selling for continuous brew...NO glass...they had porcelain, 304+stainless and one other material if I recall correctly, but no glass. This made me really start to wonder....why???...why are the kombucha experts not selling glass. I knew about glass possibly containing lead (no relationship to your original post...I think)...but this fact alone...that kombucha Kamp was not selling glass for their kombucha continuous brew made me retire all my glass when I switched over to continuous brew. I decided on porcelain...and found 2.5 gal continuous brew setups for very cheap online.
In my opinion the biggest reason for mold is temps too cold...glass, without insulation looses heat quickly....especially in winter.
My setup: Brew Container: https://foryourwater.com/collections/water-dispenser-crocks/products/solid-black-crock-dispenser-porcelain-silver-faucet-fyw-cksblk?variant=5588511457311
Germination mat: VIVOSUN Durable Waterproof Seedling Heat Mat Warm Hydroponic Heating Pad 3'' x 20" for Kombucha Tea & Beer Brewing, Fermentation, Seedlings & Plant Germination https://www.amazon.com/dp/B073PTZCJ4/ref=cm_sw_r_cp_taa_Y0QMCbVKHEB93
Thermostat: VIVOSUN Digital Seedling Heat Mat Thermostat Controller 68-108℉ https://www.amazon.com/dp/B015F4VFGI/ref=cm_sw_r_cp_taa_81QMCb2K5YSWK
Stainless steel dispenser: Oak Leaf Replacement Spigot for Beverage Dispenser,Water Dispenser Faucet, Stainless Steel Spigot for Drink Dispenser, Food Grade, 2-Pack https://www.amazon.com/dp/B07JZ6KJQJ/ref=cm_sw_r_cp_taa_T2QMCbJTK12ED
And insulation in colder weather...Reflectix for inner and outer layer and middle layer of thick insulating fabric...velcro to hold it all together....insulation saves money in cold weather....cutout where the spigot is.
Place germination mat wrapped around upper part of brewing container.
Hope this post is not too long.
Heating: Heating Mat
The light bulb in a paint can always worried me about a broken carboy causing electric issues or the bulb burning out and me not knowing.
Cleaning: you can use diluted bleach and then rinse out with water and star san before you put a batch in there.
Extra: As for your chest freezer, I realize you have it laying around and ready for use, so go for it. But I went with an upright freezer and built a shelf inside. Reason being is that it takes up less floor space and I won't have to lift the 6gallons up and over the base of the chest freezer. I have also moved up to a conical and needed the extra head room.
I use a seed mat heater lightly placed around the vessel. I bought one with a regulator on amazon. This one works well for my 2 gallon vessel. VIVOSUN 10"x20" Seedling Heat Mat and Digital Thermostat Combo Set https://www.amazon.com/dp/B016MKY7C8/ref=cm_sw_r_cp_api_HEelybCXF3F8D
A heating mat you say? That's interesting. Never heard of those. Something like this?
Can you control the temp pretty accurately with your mat?
I'm using a porcelain water dispenser with this seed-sprouting mat just loosely around it: https://smile.amazon.com/gp/product/B00S1VJ0OC/ref=oh_aui_search_detailpage?ie=UTF8&amp;psc=1 and that's getting me to 80-85 usually and definitely speeding up the brew process.
Get yourself a heat mat and a cheaper thermostat. I use these when I need a cheaper option. I also have a second probe thermometer to monitor the temps since I don't completely trust the cheaper thermostats. But I've used them for years without any issues, so I haven't found anything to justify my distrust. I just like to be doubly sure. (:
For the shedding, the most important thing to help your leo is a humid hide. My girls get enclosed hides (something with a base and only a hole entrance) with sphagnum moss. I mist the moss until damp every other day or as needed. I live in a very arid environment (usually around 20%) and don't do anything else for my leos humidity wise except their hides. They very rarely have any shedding issues. One girl actually came to me with horrible chronic shed problems (she lost 3/4ths of her poor little toes to stuck shed), but with her humid hide she's not had any problems since!
If you don't have one already, there are guides to making your own humid hide. You can get a tupperware container with a lid, place it on it's top and cut a hole in the side where the leo can get in. Stuff it with a bit of moss and mist it and there you go! There are hides sold specifically for humidity, and I find my girls prefer the dark hides to the clear tupperware, but it sounds like your boy needs something ASAP.
Edit: to answer your question more. I only step in for stuck shed with my leos if it has been a few days. Once in a while they will have some left over for awhile after a shed, but they usually take care of it themselves. Toes and noses can be tricky and can take some time. If they have a humid hide they'll use it to help soften the remains. When I do have to step in, I use a wet cotton swab after a soak. You can try dripping water onto his nose to soften the shed first.
https://www.amazon.com/gp/product/B00P7U259C/ref=ppx_yo_dt_b_asin_title_o01__o00_s00?ie=UTF8&amp;psc=1
The reviews are meh, but it looks like customer service does a good job replacing faulty heat mats free of charge to people.
Going to give this a try... got this heat mat here : https://www.amazon.ca/gp/product/B01IDQD32Y/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&amp;psc=1
Hopefully it works well. OP you are using something similar then? It goes to 108f so hopefully I’m good. This looks DELICIOUS
One of these are your friend. Germination and seedlings love a warm environment. https://www.amazon.com/gp/product/B00P7U259C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
We use these for our bearded dragon and hedgehog, but there's no reason you couldn't just plug a space heater into it. I agree there's not really a need for a "smart" solution here.
https://www.amazon.com/gp/product/B01E9IO6N0/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Yeah, that happens, especially when it's too cold. You could try insulating it with a towel, or buying a seedling starter heat mat (which are often sold as Kombucha warmers now) to keep the temp up. Here's mine!
This one: https://www.amazon.com/gp/product/B00P7U259C
It's just large enough to place 2x 5 gallon carboys on. I also make sure to place a towel underneath to insulate and keep the hard glass form shorting any electrical.
Maybe try a seedling mat?
Whoops forgot the link.
https://www.amazon.com/CISNO-Fermentation-Germination-Propagation-Waterproof/dp/B0756DQV2C/ref=sr_1_20_sspa?ie=UTF8&amp;qid=1519678015&amp;sr=8-20-spons&amp;keywords=heat+pad+fermenter&amp;psc=1
Has anyone ever used these? It's not like i would be relying on this non-stop just when the temp is below 70, which is pretty much just a 2 week span throughout the year in So Cal lol
You probably won't find a thermostat at a big box pet store, here's a decent cheap one you can get on Amazon: https://www.amazon.com/BoHoFarm-Thermostat-Controller-Digital-Germination/dp/B07LBGWMV9
here is the thermostat that I have always used. it’s a good price and I haven’t had any issues with it
and here are the thermometer/hygrometer combos that I use. one on the hot side, and one on the cool side.
Any heat source will work as long as it gets warm enough and not too hot. You’re looking for about 85 degrees. For me, this means setting my mat to 93 degrees.
Here’s the mat I have with temp controller. It’s cheap but works. $28 shipped.
controller
mat
Thermostats are different from thermometers. Thermostats regulate the temperature while thermometers measure it. Non-digital thermometers are also known to be inaccurate. A thermostat like this would be perfect: https://www.amazon.com/iPower-40-108%C2%B0F-Thermostat-Controller-Germination/dp/B01E9IO6N0/ref=sr_1_3?keywords=thermostat+seed&qid=1562452127&s=gateway&sr=8-3
You absolutely MUST regulate your temperature with a thermostat/rheostat. They are very cheap, buy one right now. You put the thermometer probe on the bottom of the inside of the enclosure, and set it to the proper temp of ~90F.
I would advise moving your hognose out of the 20 gallon tank - it's far too big for a baby - and moving it into a plastic bin instead. They hold heat much better to keep the ambient around ~80F, as well. Something closer to this will work much better for your snake while it's young and less than ~12" long. You will want to punch holes in it for air flow. I'd also suggest changing to 2-3" of aspen bedding, since hognoses like to burrow and walnut will not hold burrows.
Zilla 11931 8-1/2-Inch Reflector Dome For Up to 150-Watt Bulbs, Silver https://www.amazon.com/dp/B005SRVM2K/ref=cm_sw_r_cp_api_i_eNFxDbWNQT4D5
https://www.amazon.com/dp/B01MXUT5RH?ref=ppx_pop_mob_ap_share
https://www.amazon.com/dp/B01E9IO6N0?ref=ppx_pop_mob_ap_share
These are links to the best heat to use the lightbulb comes with a thermometer and the thermostat connects to the light allowing you to set the temperature. ( If you're just interested in the thermostat it's the last link!)
This is the thermostat I am using: https://www.amazon.com/iPower-40-108-Degrees-Fahrenheit-Germination/dp/B01E9IO6N0/ref=mp_s_a_1_1_sspa?keywords=ipower+thermostat&amp;qid=1565799414&amp;s=gateway&amp;sprefix=ipower+the&amp;sr=8-1-spons&amp;psc=1&amp;spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzQ1pES05SRzg3TTdPJmVuY3J5cHRlZElkPUEwMDc5NDIzM1BXSEhKNVBENjQ5UCZlbmNyeXB0ZWRBZElkPUEwODE0MTEzMVY4UlJTMTFIQlE2QiZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
And if it matters for the CHE, my ambient room temperature is around 67-69F.
Sounds like its too cold. Why dont you get one of these heater bands for $11 on Amazon:
https://www.amazon.com/VIVOSUN-Waterproof-Hydroponic-Fermentation-Germination/dp/B073PTZCJ4/ref=cm_cr_arp_d_product_top?ie=UTF8
You could also try a dimmer with the lamp.
https://www.amazon.com/Apollo-Horticulture-68-108%C2%B0F-Thermostat-Controller/dp/B010GFADNM
https://www.amazon.com/VIVOSUN-Seedling-Thermostat-Controller-Alternation/dp/B015F4VFGI/ref=cm_cr_arp_d_product_top?ie=UTF8
I use these two. There's also an additional one linked in the beginner post I think
VIVOSUN Durable Waterproof Seedling Heat Mat 10"x20"
https://smile.amazon.com/VIVOSUN-Waterproof-Seedling-Hydroponic-Standard/dp/B00P7U259C
No problems yet
I have been using this one with no issues so far. A little cheaper and it does the same thing. Although it reads about 2-4 degrees cooler than what my gun reads and I usually go with what my temp gun tells me so I match the thermostat accordingly.
I used this https://www.amazon.com/dp/B07F821DKQ?psc=1&amp;ref=ppx_pop_dt_b_product_details
In one of these
https://www.amazon.com/Sterilite-Gallon-Plastic-Storage-Steel/dp/B014840E86/ref=sr_1_17?keywords=plastic+tub+with+lid&amp;pd_rd_r=b1958485-951d-4906-a386-981da029ac04&amp;pd_rd_w=VltlO&amp;pd_rd_wg=WD9l7&amp;pf_rd_p=67c9d84c-d98a-4415-a549-dd3360e9d207&amp;pf_rd_r=S5XB569X9DYX8ZVV9VRX&amp;qid=1568856011&amp;sr=8-17
$12 from staples homedepot walmart
And one of these
https://www.amazon.com/Checkered-Chef-Cooling-Racks-Baking/dp/B06X9KLW1P/ref=sxin_3_ac_d_rm?ac_md=1-1-Y29va2luZyByYWNr-ac_d_rm&amp;crid=3UVQLY9087W72&amp;keywords=cooling+rack&amp;pd_rd_i=B06X9KLW1P&amp;pd_rd_r=d5976832-1c76-4173-8b8e-9b72b1ce31d7&amp;pd_rd_w=ZICAS&amp;pd_rd_wg=4WK2M&amp;pf_rd_p=404c4843-2c96-4d0d-a5fe-2b0598693e61&amp;pf_rd_r=QSFME0XHTVFA2RCS6V4P&amp;qid=1568856190&amp;sprefix=Cooling+r%2Caps%2C432
So the booch isnt just sitting on the mat
I leave the lid cracked and check twice a day
Hope this helps alittle
If you think it is too cold for the soil, you can get a heatmat. (this is just one of many out there, but a good example).
It's on the bottom left side. Here is the Amazon link. iPower 40-108°F Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing https://www.amazon.com/dp/B01E9IO6N0/ref=cm_sw_r_cp_apa_i_FILvCbH72MP6H
Caution, you want to run your space heater on a low to medium setting. The thermostat can't handle anything above 10ampers
https://www.amazon.com/VIVOSUN-Waterproof-Seedling-Hydroponic-Standard/dp/B00P7U259C?crid=1LX4AVKOE8WCZ&amp;keywords=seedling+mat&amp;qid=1539044444&amp;sprefix=seedling+ma%2Caps%2C216&amp;sr=8-5&amp;ref=sr_1_5
I haven't heard of anyone using those. It looks interesting but a couple things I can think of:
If that power symbol on the top left is a light, it may disturb your hedgehog.
It says it has two heat settings with a built-in thermostat. If those settings aren't an appropriate temperature, you may need an additional thermostat. Redundancy is always good with heaters anyway in case of failure.
I wouldn't place it within reach of the hedgehog despite it saying zero clearance.
Most people use these types of heat products:
https://www.amazon.com/dp/B00HFNZ59Q/ref=cm_sw_r_cp_apa_1at8Bb48DVR65
https://www.amazon.com/dp/B003H200QC/ref=cm_sw_r_cp_apa_Lct8BbWJYR774
https://www.amazon.com/dp/B01E9IO6N0/ref=cm_sw_r_cp_apa_Cdt8BbH1E5YHF
I would suggest a heat mat with a temp controller as an attachment. It makes the hot spot temp stable and you only need to check to make sure your snek hasn’t dislodged the gauge that’s attached to glass where the heat may lies underneath! Makes my life so much easier. Hot spot should be about 90. Cool side should be about 70-80 and if your house naturally sits at this you should be fine, if not you could use another heat mat for the cool side with the controller and gauge just sweating it at a lower temp. I’ve found they’re more reliable than bulbs (not that bulbs aren’t totally fine). Just my recommendation! I’ll link the heat mat and regulator I bought off amazing below!
Thermostat (heat regulator)
BoHoFarm Heat Mat Thermostat... https://www.amazon.com/dp/B07LBGWMV9?ref=ppx_pop_mob_ap_share
Heat mat
Zoo Med ReptiTherm Under Tank... https://www.amazon.com/dp/B0002AQCKA?ref=ppx_pop_mob_ap_share
Thermometer and humidity gauge
Zoo Med Labs Digital Thermometer... https://www.amazon.com/dp/B06XY3X7P9?ref=ppx_pop_mob_ap_share
Kombucha is fairly forgiving, but the following might help:
I hope that helps :)
It's a VIVOSUN 10in x 20in seedling heating pad I bought on Amazon. I paid $8.73 USD for it with free two day shipping. It's currently going for 11.99. you can find it here
Your prolly find it by typing seedling heat mat .
Seedling Heat Mat, Warmhoming Seed Propagating Heat Mat for Seedling, Durable Waterproof Warm Hydroponic Heating Pads (18.5" x 8.5") https://www.amazon.com/dp/B01MA0JR17/ref=cm_sw_r_cp_api_b1TwzbFTTKATY
I've never done this for plants but putting on bottom or even wrapping around could work there's a YouTube video to get use a controller to get to just the right temp if it's to hot I wouldn't think it would be at that temp or use a timer to run in the night and morning.
VIVOSUN Digital Seedling Heat Mat... https://www.amazon.com/dp/B015F4VFGI?ref=yo_pop_ma_swf
I have that thermostat connected to a Large ZooMed (petsmart) Under Tank Heater. Warm side shouldn’t exceed 95!
add a thermostat to keep it at 75 degrees
Here are some sheets, but they don't look nearly as thick:
https://www.amazon.com/CocoTek-Coco-Garden-Plant-Media/dp/B0055F3QQ0
https://www.hydrofarm.com/p/GH98112
You could try I guess! I have no idea how warm they get.
This is the sort of thing I use. Not this specific make/model but they probably all come from the same factory with different branding printed on. If you’re doing any appreciable volume of cactus seeds it’s very helpful. It’s good for rooting cuttings and degrafted plants too.
https://www.amazon.com/VIVOSUN-Seedling-Digital-Thermostat-Standard/dp/B016MKY7C8/ref=zg_bs_14252891_8/132-1848626-0927011
Propagate pro heating mat with a thermostat controller. Here it is on Amazon.
Windowsill can be okay, habaneros are REALLY slow going to start and they like hot, dry climates so I imagine scotch bonnets are similar. Growing indoors is difficult (especially in a shared dorm room... I was in a double-turned-triple at UC Davis and it wouldn't have worked in that room) but not impossible! I bet you have Amazon prime student:
https://www.amazon.com/VIPARSPECTRA-Reflector-Spectrum-Indoor-Plants/dp/B01B4GQ6MO/ref=zg_bs_14252961_2?ie=UTF8&amp;amp;psc=1&amp;amp;refRID=T1T4RJ6TMQ6D72FXWJB3
and
https://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C/ref=zg_bs_14252891_2?ie=UTF8&amp;amp;psc=1&amp;amp;refRID=J91JPXDTJ5F52TMWZE78
along with some containers and high quality organic soil will be enough to get you growing! You'll want to keep seedlings under a CFL until they have two well developed leaves, then you can stick it ~ 30" below the light. The difficult part is getting peppers to form... peppers put out flowers in the mid-late summer when nighttime temperatures are highest, cold temps will make it difficult to fruit so chances are you'll be waiting until late next spring no matter what... in which case you have to wonder if it's worth spending $100 on equipment (where you live next year might be a factor). On the bright side, the light supports a solid 3x3 area and you could try growing a few things. Good luck! Don't forget to study lol
This is what I purchased. iPower 10" x 20.5" Warm... https://www.amazon.com/dp/B01IDQD32Y?ref=ppx_pop_mob_ap_share
Just to emphasize, get a heating pad used for seedlings and reptiles. Not the ones used for your back. I got one of these
https://www.amazon.com/VIVOSUN-Waterproof-Seedling-Hydroponic-Standard/dp/B00P7U259C
Just get whatever size you need for your cooler. They are flexible so it can be too long in one of the dimensions and just bends up the sides.
I've found Repticarpet gets messy quickly, especially when your gecko goes for a dip in their calcium dish and tracks it everywhere. I personally use non adhesive shelf liner for the bottom of my tank and add a few stones from the pet store for texture for my little one to run around upon.
I suggest using a temperature gauge to make sure the heat mat doesn't burn them. I like to get them for cheap. I've bought 6 and have loved them all. You typically stick the probe between the mat and the glass, and set the temperature accordingly. This is what I use: https://www.amazon.com/dp/B01E9IO6N0/ref=cm_sw_r_cp_apa_i_ELKYDbN9JM51K is the one I use
I also use sphagnum moss in the moist hide as it holds humidity better, but paper towels will get the job done so long as you're properly moistening them.
I recommend the Flukers heat mat. It's non adhesive, so you'll want to purchase HVAC tape. This is tape that can be found at most hardware stores. It is made out of adhesive and aluminum foil, so it can easily handle the high temperatures. you can find it in the plumbing section. I've used the heat mats that come with the stickiness on them only to bend and break them when trying to deep clean the tank (I'm not gentle), so this will let you avoid having to replace them as often.
As it's winter, if you find their ambient air falling low, you can always invest in a ceramic heat emitter.
I also suggest using a digital thermometer to gauge the temperature of the air within the tank. You can find these online anywhere between 10 dollars and 100. I have a simple one and it's done the job. This has also helped me with ensuring that I have the heat mat at the right temperature, in case some heat gets lost through the glass and I have to raise the temperatures using the thermometer.
As someone else has said, it's better to avoid loose substrate when at all possible, such as sand or dirt, especially if you're just starting out. This will minimize risk of impaction.
And If you have any other questions, feel free to reach out. C:
About 10$-20$. Also it costs electricity, perhaps 2$ per year.
https://www.amazon.com/VIVOSUN-Durable-Waterproof-Seedling-Hydroponic/dp/B00P7U259C/ref=sr_1_3?ie=UTF8&amp;qid=1503159725&amp;sr=8-3&amp;keywords=heating+pad+plant
iPower 68-108°F Digital Heat Mat Thermostat Controller for Seed Germination https://www.amazon.com/dp/B01E9IO6N0?ref=yo_pop_ma_swf
iPower Small Seedling Heat Mat 10" x 20.5" Warm Hydroponic Heating Pad with Durable Waterproof Design https://www.amazon.com/dp/B01E9IO87O?ref=yo_pop_ma_swf
I use 3x20 mats for the 2Gs. I may get controllers if things get a bit toasty during the summer.
I'd say your thermostat is broken, if it goes over the set 90f you put in, it should be shutting off, not continuing to heat. Maybe try contacting the company to see if they have suggestions or if they can just replace it? I use a viviarium electronic thermostat for my rack but that would probably be overkill for you. I have used this one before for other species and it works pretty well! What do the tank temps get in the cooler side with the CHE off? does your house stay warm enough to rely on heat pad alone?
Running power from your house is probably going to be your cheapest option. If you dont heat it at night your tortoise could get sick and cost you several hundred dollars in vet cost. So you need to decide on where you want to spend your money. Regardless your going to have cost. If you absolutely cant use the houses power then you need to go solar. A 200 watt kit would probably be the minimum necessary to charge the batteries daily. This is the kit I use. You can set the controller so that power kicks on only when its dark. A solar setup is going to at minimum probably cost you $500 by the time you buy an inverter and batteries. DONT USE CAR BATTERIES. Either solar batteries or at least golf cart batteries.
I have a redfoot but she is still small enough for indoors.
You want a heated night box for it sleep in. This is what I built for my sulcatas. Mine is a 4x8 foot insulated box they stay in. They can come and go as they please. You could build a mini one for probably less than $100.
4x4 Night box - although these are my plans from sketchup its not my original idea.
http://imgur.com/a/TZQ4P
4x8
https://imgur.com/a/3nlrM#0
Heat mats are low wattage and would do the job for keeping the tort warm thru the night without completely discharging your batteries. Install it under a second layer of thin plywood so the wood floor is warmed. You dont want the tort to lay directly on it as it might burn the tortoise if where to malfunction. I use these with my sulcatas in their night box.
Plug the Heat mat into a dimmer switch so you can control the voltage and temp of the mat. I usually run mine at half power.
Use something like this to remotely monitor the overall ambient temperature in your box.
Overall it will be much cheaper to run an extension cord or to pay an electrician vs solar setup to run power to the enclosure.
OK, here's my feedback:
The only other thing I'd add is maybe a heating mat like this if it gets cold inside where you are. I have one and another on the way, and they really help ensure an active ferment.
Had it a little under a year now, zero issues
VIVOSUN Durable Waterproof... https://www.amazon.com/dp/B00Y27FJ1C?ref=ppx_pop_mob_ap_share
I use this: https://www.amazon.ca/VIVOSUN-Waterproof-Seedling-Hydroponic-Standard/dp/B00P7U259C
Works great, just used it to speed up a kimchi ferment since it's about 16-17C in my apartment without the heat on.
&#x200B;
edit: a word
Look into a seedling mat instead. Theyre meant for wet use and just a few bucks.
https://www.amazon.com/dp/B00P7U259C
I used the two pack of these plugged into a inkbird to keep the batch warm. Was able to get it to 100f in a 63f basement.
VIVOSUN 2 Pack Durable Waterproof... https://www.amazon.ca/dp/B015PD8I7I?ref=ppx_pop_mob_ap_share
Depending on the time of year you could make such a better setup yourself for a either a little cheaper or more or less the same price. Here's a little shopping list, some points have reasons by them.
Decor/Plants/Bowls can be added if and when necessary. Substrate can be of your choice, as this is your sons reptile I'd avoid the loose-route for now. This brings our grand total to, roughly, $114.59 - Preshipping at the cheapest route. You can knock a few dollars off of this if you manage to find some cheaper hides and cheaper supplements. Since I'm in the UK I couldn't find the products that I'd normally use as supplements, ours are a lot cheaper - seemingly.
&#x200B;
If you need any more help/advice you're more than welcome to reply or PM me.
This is a 4x4 Flood Table built for a 5x5 tent. Just need to find good medium and I'll be popping seeds :) Glad to be back at it!
Current Plan:
> ##Ebb & Flow:
> Finished Table
> Tray: 4x4 Botanicare Tray
> Fittings
> Pump: Active Aqua Submersible Water Pump, 400 GPH
> Drain Hose: 1/2" Inside Diameter)
)
> Pump Hose: 3/4" Inside Diameter
> Rubber Grommets: 1/2 inch
> Stand: 5x5 Wood Frame (Building this weekend)
> Reservoir: 55 Gal.
> Air Pump: 95 GPH
> Air Diffuser: 4x Air Stones
> ##Medium:
> Germination: Starter Plugs
> 6 inch Net Pot
> Hydroton (but willing to be convinced otherwise!!!)
> 4 x 4 Coco Mat
> ##Environment:
> Tent: 5 x 5
> Light 1: 1100W DE HPS bulb w iPower Ballast & Extend-A-Wing reflector
> Light 2: 600W of QBs
> AC inside, Venting Outside with 450CFM fan
> ##Nutrients:
>
> Flora Trio
> KoolBloom
> Diamond Nectar
> Armor Si
> Floralicious Plus
> Humboldt Snowstorm
> Mammoth P
> * Hydrogaurd
> Strain: Sweet Amnesia (from seed)
ANY AND ALL ADVICE IS APPRECIATED!!!
You could maybe use seedling heat mats under the base of the tanks, instead of individual heaters, assuming they all need the same temperature.
I just got one of these: Seed Mat
The booch is at 80' F. Fairly cheap solution.
Thank you all so much for the advice!
I'm really strapped for money right now, so I'm going to try and make her tank work for as long as possible. I put a little amazon shop list together with some of the recommended products - please feel free to take a look and recommend other suitable products. http://a.co/b2h5atL
In the list, I've got multiple different fake plants, some black 1 entrance hides, a complete hide with 4 sides and just a hole, multiple digital thermometers / hygrometers, a kitchen scale, coconut fiber, aspen bedding, a ceramic heat emitter with dome, and a thermostat
(I had already bought this one https://www.amazon.com/gp/product/B01E9IO6N0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&amp;psc=1
would it be suitable? Or should I return it to get the one on the shopping list?)
She does have one of those metal screen tops, but we put a few boxes and such on top for extra security. I may pick up some insulation pads at my local Lowes and attach them to the outsides of the tank to help keep the heat in. Thoughts on that?
Sarah is eating okay. So far we've been giving her 1 little fuzzy each Saturday. Hopefully when I get the scale I'll be able to more accurately assess the food weight vs hers.
Her shed has come completely off! I gave her a nice warm soak shortly after the photos had been taken, and it was like she just wiggled out of it. Hopefully with the substrate change and the addition to the 4 sided humid hide, I won't need to soak her and she can just do her own thing.
When it comes to the ceramic heat emitter, is 60 watts enough? I'm afraid of burning her. The cage is only about a foot tall, and it would have to be in one of those dome lamps that sit attached to the screen. I've been leaning towards getting the "Zoo Med Deluxe Porcelain Clamp Lamp" for the bulb. Has anyone had any experience with this? Will they work together?
I'm absolutely horrified of any fire risks (my house had burnt down about a year and a half ago due to faulty wiring) so are there any tips to help prevent overheating?
Again, thank you all for the amazing advice. Looking at Sarah's previous setup and then looking at everything thats been suggested breaks my heart. I wish I had known sooner that she was being treated this way... But my friend had made it clear that she was "basically an expert" and "knows what to do." Let me roll my eyes a bit harder. As soon as I had seen her bearded dragon laying in sand, I knew she didn't know anything about these poor animals. It takes a few minutes to do some decent research on an animal. Its been just a day since I've reached out to all of you, and look at all this information! You would think in the 3 or so years that my friend had Sarah, she could've taken the time just to do a basic google search...
Some people really should never have animals.
Anyways, sorry for the tangent. Please let me know what you guys think of the products I'm considering! Thank you so much!
I'm using this. No regulator, but my brews are staying right between 74-76°. https://www.amazon.com/gp/product/B00P7U259C/ref=oh_aui_bia_detailpage_o02_s00?ie=UTF8&amp;psc=1
I have used the thermostat you linked for 2-ish years without a single problem. I also recently purchased this even cheaper but functionally identical thermostat, and it's been working perfectly for the last week.
Here are a couple more images. This is Golden Teacher, grown in a monotub on coco coir and gypsum. I was worried about the temperature of the fruiting chamber, so I ended up buying This seed mat and temperature controller.
I completely understand what you are saying. I was looking into a reptile heating pad or a
seedling heating mat (https://www.amazon.com/gp/product/B00P7U259C/ref=ox_sc_act_title_1?ie=UTF8&amp;psc=1&amp;smid=A2PQGFJXAT8J9K) and
temp control setup (https://www.amazon.com/gp/product/B00P7U259C/ref=ox_sc_act_title_1?ie=UTF8&amp;psc=1&amp;smid=A2PQGFJXAT8J9K not comfortable soldering something up that connects to a wall socket)
but was curious if there was something else out there.
If you just need it for seedlings, 75 watt will do well. I thought you wanted to grow plants in it. As for heat, heat pads. If heat becomes a problem you can use heat pads.
https://www.amazon.com/gp/product/B00P7U259C/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&amp;psc=1
I'm sure they do, I ordered on amazon.
https://www.amazon.com/gp/aw/d/B07F821DKQ/ref=sspa_mw_detail_6?ie=UTF8&amp;psc=1
This is what I'm using.
GT is a great brand of high quality kombucha. If you are planning on starting your first batch, I would recommend that you use GTs original rather than one of the flavored bottles. You only need between 1 1/2 to 2 cups of starter tea to start your SCOBY, so finding the larger GT bottle would be unnecessary in your case.
As far as your home temperature, kombucha likes it best between 75 and 80 degrees Fahrenheit. I use the propagate pro heating pads along with a lamp dimmer switch to keep the temp ideal. Here’s a link if you’re interested: https://www.amazon.com/gp/aw/d/B01ETRWSI6/ref=sxts_1?ie=UTF8&amp;qid=1549249522&amp;sr=1&amp;pi=AC_SX236_SY340_QL65
Thermostat
And for an UTH just get one from zoomed, I've never had a problem with theirs before.
Echoing others, the key to all my germination problems in the past has been heat. I picked up this propagation/seedling mat and use that with some trays I got at the dollar store - it's worked really well.
Haven't grown my koji yet because I'm on vacation, but here's what I purchased and it all works:
&#x200B;
- Humidistat: https://www.amazon.com/gp/product/B071ND7N8L/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&amp;psc=1
- Perforated pan: https://www.amazon.com/gp/product/B01E95D6H0/ref=oh\_aui\_detailpage\_o02\_s00?ie=UTF8&amp;psc=1
- Pan: https://www.amazon.com/gp/product/B001VZ6Y4O/ref=oh\_aui\_detailpage\_o01\_s00?ie=UTF8&amp;psc=1
- Humidistat: https://www.amazon.com/gp/product/B01J1E5LWM/ref=oh\_aui\_detailpage\_o04\_s00?ie=UTF8&amp;psc=1
- Thermostat: https://www.amazon.com/gp/product/B015FKG4CC/ref=oh\_aui\_detailpage\_o04\_s00?ie=UTF8&amp;psc=1
- Heating pad (I fold it in half): https://www.amazon.com/gp/product/B00P7U259C/ref=oh\_aui\_detailpage\_o04\_s00?ie=UTF8&amp;psc=1
- Styrofoam container: https://www.amazon.com/gp/product/B000NO6F8E/ref=oh\_aui\_detailpage\_o05\_s00?ie=UTF8&amp;psc=1
This approach came up on the Facebook group:
https://www.amazon.com/gp/product/B07F3PBX7J
And control the temperature using one of:
https://www.amazon.com/gp/product/B01E9IO6N0
https://www.amazon.com/gp/product/B008KVCPH2
If I do this, I'd personally use an ESP32 microcontroller instead as I have those and like playing with them.
Not advertising it or anything, but I use this one from Vivosun, and it fits perfectly on a cheap Ikea Lack table. It doesn't appear to be on amazon.ca, but I'm sure there is something similar you can find.
Try one of these guys. $20 on Amazon.
https://www.amazon.com/gp/product/B00Y27FJ1C
i got this pad VIVOSUN 10"x20.75" Seedling Heat Mat and Digital Thermostat Combo Set MET Standard it's water proof and has temp settings that some heating pads don't have.
Will one like this be able to keep an outside 7cu at sour fermenting temps during the winter? GA winters aren't too harsh but a lot cooler than ~100ºF
mats
temp controller
These things are a must for proper seedling germination also, for many species, not only cacti. Well, they are here in zone 4 anyhow, lol.