(Part 2) Best safety masks & respirators according to redditors
We found 842 Reddit comments discussing the best safety masks & respirators. We ranked the 196 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
Depends on to whom you talk and how extensive the mold.
edit : if you're unsure or you're concerned or the area is very large, consult a professional. Just be aware that mold removal from reputable, qualified professionals is not inexpensive.
I'm a believer that if the dust mask doesn't fit tightly around your mouth and create a seal, it's not going actually filter anything out. The air you breathe in will take the path of least resistance and go through any gaps instead of actually being filtered.
I would go with a half mask respirator and a p100 filter or similar.
Buy something like this:
https://www.amazon.com/SAS-Safety-2985-Non-Toxic-Dust/dp/B0002STR1I
Put one on every time she lights up. She probably won't care but if anyone asks tell them exactly why and shame her to her face.
EDIT: I don't know if it would help but it's a silent harmless yet very visible protest.
Time to get a gas mask sent to Garrett's house.
this ok?
I prefer p100 masks, why skimp?
https://www.amazon.com/gp/product/B001BXRRH4/ref=ox_sc_saved_title_2?smid=ATVPDKIKX0DER&psc=1
I'm no doctor, but I am in nursing school, currently work as a nursing assistant and work on a unit that performs thoracic surgeries if that helps you trust my post even just a little.
Any thing that is aerosolized and we breath in can/is potentially dangerous. Even water. There's a reason you should wear a good respirator when working with any kind of spraying paint. If it blocks out odor, even better.
When you breath in the particles, they can cling to the alveoli (little sacks that connect to arteries and veins to bring in oxygen and release Co2) that line the bronchioles in your lungs and either reduce the surface area available for gas exchange, or if they're small enough particles, enter the blood stream. Most paints have some metals in them (metallic paints obviously) and these can store up in your liver. If your liver can't filter it out, it can potentially cause damage there or get sent off elsewhere in the body via blood and do damage elsewhere.
Chemically it all depends on the actual chemical, how it affects different cells in different tissue types. How it attaches to said cell and does it just attach or does it actually enter the cell and alter any parts of it? Rapidly dividing cell types (like skin) are more prone to cancer than say cardiac cells (but that's not to say it can't happen, just not as likely) Anything labeled as carcinogenic means that under constant use can eventually cause cancer. But they fail to say how long this is or what their definition of constant use is. Daily for a few hours or daily for long periods of time and if they stretches into daily use over years, or only months.
Fumes as in smell from these products don't cause cancer, but the reason we feel light-headed or dizzy/nauseous when using them or breathing them in is because we're (usually) unintentionally breathing is less oxygen, depriving the brain of said oxygen, and that's how the brain reacts. Hence why they warn you on the label and tell you to use in a well ventilated area. This is probably what you're experiencing. Your cough comes from the particles entering your lungs and being irritating enough to elicit the coughing response which is the natural response to shake things off the alveoli.
I hope this helped answer at least one of your questions. And incase you haven't already, go get a respirator! I recommend this one: https://www.amazon.com/3M-Paint-Project-Respirator-Large/dp/B0009F5KDS/ref=mp_s_a_1_11?keywords=respirator&qid=1562758487&s=gateway&sr=8-11
I use this model with this filter. I was riding around Pleasanton yesterday with AQI ~300 and felt nothing (other than my stinky breath). I don't feel like I have to force my breathing either -- the airflow doesn't seem to be "blocked" unlike N95 masks I've tried.
Any P100 NIOSH filter / mask will do, but the main difference between models is comfort.
I'm honestly surprised people keep recommending N95...those masks are very uncomfortable on my face and barely work for my use case.
​
Whatever you decide to do, use one of these while you're doing it.
No problem!
Here you go :)
Sum up the light in a few words:
Name | Battery (type and quantity) | Lumens and mode | battery life (in order of lumens mode) | length | price (rounded up to full dollar)
------------------
The simple one mode guy:
Maybe another setting would be nice:
...Or like 30 settings:
Simple and I hate AAAs:
I like a sleek slim light with a lot of settings. I don't mind that its twist on:
...That and CR123As are my kind of battery:
Tail button FTW:
Tail button and AAs FTW:
A little longer gets you 2x the brightness:
Okay lets face it. CR123As are kinda cool:
Hope that helps!! I have a couple Streamlights and I am happy with them. On a budget (sub $50-80) they are great lights. A lot of people (non-tactical) like Foursevens. Never used one. If you aren't afraid of loosing it they seem like fantastic lights. If you can afford it and you are in tactical or just rugged situations Surefire makes unbelievably good flashlights... but they cost a lot.
EDIT: Formatting.
Just for myself and my gf, I bought a box of N95 paper respirators back in the 2015 wildfire season, and just invested in some more heavy-duty hardware since this is coming a thing:
$25 - 3M Half facepiece reusable respirator
$15 - 2-pack 3M NIOSH-approved P100 particulate and organic gas filter
If your employer doesn't care about your health, you should!
I carry this on my key ring: http://www.amazon.com/4Sevens-Mini-123-R5-Edition/dp/B0050PN9H6/ref=sr_1_4?s=hi&ie=UTF8&qid=1367667374&sr=1-4&keywords=foursevens+mini. Great little light.
a post I made last year:
I have tried
The Respro is okay. Certainly the only stylish one i tried. One common feature of the masks is a moldable metal nose piece, that allows you to shape the mask to your face. The one on the respro is both the most durable, and the worst. Its stiffness makes it tough to form and reform. That said, the seal it forms seems to be fine, but getting a really good fit is hard, because it lacks a strap that goes over the ear. I'm sure you can get this style of mask in n99 or whatever.
The 3M n95 is the cheapest (by far), and the lightest. The fit is good, and the seal is adequate, although the seal is the worst of the four. The filter is more stiff like paper.
The 3M n100 is probably my favorite so far. The filter is more flexible like cotton. I generally don't worry about crushing it in my bag, except for the metal nose piece. The fit and seal are both excellent.
The 3M p100 is certainly the most hardcore. It's cost is the highest, but the replacement filters are cheap enough. I haven't used it much, but it's the one that the bicycle collective sells, which I consider to be a good marker.
Also I recently reached out to the American Lung Association about masks. Here is the last, most detailed response.
> USEPA sets a PM 2.5 annual air quality standard at 15ug/m3
This is a rolling 12 month average. There is also a 24 hour limit of 35ug/m3
These numbers are established for air quality in the air shed and not necessarily in the breathing zone – which is the most item relevant to your question.
These numbers are not extractable to breathing zone concentrations.
A healthy person should not have a need for any respirators, the respirator is recommended for those with impaired systems.
In addition, lung cancer is complex and there are other factors, which include air quality (type of pollutant), genetic disposition, and duration of exposure.
> Saying all this, it’s hard to make a recommendation on when to use the N95 disposable respirator to prevent lung cancer (knowing that the three factors above play a large role in the equation and outcome). If in doubt, or if you feel there is a need, wear the respirator (with proper fit) when there are air quality concern days).
Not to pile on, but vacuuming up a puddle does not expose you to mold, especially if you are timely about it.
Edit: to be on the safe side, you could wear a respirator. These days, respirators are lightweight, comfortable, and cheap. https://www.amazon.com/gp/product/B008MCUVN4/
Multipurpose waterproof match case. I prefer this case because it's not much bigger than other waterproof cases, but has other stuff built into it. I put waterproof matches in it along with the striker strip from the package. The whistle is good for signaling. The other functions are marginal, so I supplement them with the actual things, which consist of a signal mirror, lensatic compass, and emergency fire starter.
A stove and solid fuel. I was pretty impressed with this particular one when I received it. It's stainless steel, well constructed, and you can store four fuel tabs inside of it.
A multitool and a fixed-blade knife. I don't have either of these specific models, but they seem pretty decent.
A folding shovel. These are good for burying waste, helping a car gain traction in the winter, etc.
A self-adhesive bandage. This is a three-pack. The single one cost $4 locally. Buy this one and leave the other two in your medicine cabinet. Wrap the remaining one around a piece of cardboard and put it in your emergency pack.
Disposable antibacterial wipes.
Antimicrobial silver gel. Like Neosporin, but better. Stays on a wound for multiple days without covering, and the colloidal silver is a strong antimicrobial agent. See the oligodynamic effect.
Dust masks. This is for a 50-pack, but for half the price, you only get 10 at a local store. These help prevent you from spreading germs if you're sick, and keep you from inhaling macroscopic particles if you're in a dusty/dirty area.
QuikClot sponge bandage. This helps to stop bleeding from major injuries. Along with an Israeli battle dressing you have two great ways to help stem major bleeding, separately or combined.
Local anesthetic for stings. Good for numbing injuries other than stings, too.
Sterile pads, 4” x 4”.
Sunscreen.
Cigarette-adapter power inverter. Good for charging small electronics.
Hand warmers.
Work gloves and watchcap.
All of the following are probably best bought in stores or scrounged up around the house:
Toothbrush, toothpaste, floss, all with obvious uses.
Aspirin, for heart attacks and pain, ibuprofen for pain, anti-histamine for allergic reactions, and Imodium or off-brand equivalent for diarrhea. I can't stress having Imodium enough. Having cramps and shits can render you unable to do anything for long periods of time, even more so than other ailments.
A disposable razor can be used to shave to keep up appearances, or to shave the area around a wound for better bandaging.
Maxi pads and tampons can be used as intended as well as to prevent bleeding from wounds.
Toilet paper. Wrap it around a piece of cardboard to save space.
Bandanas or an old shirt can be used to make a sling, protect yourself from the sun, filter macroscopic particles out of water, filter dirty/dusty air, etc.
Hot chocolate with caffeine added can be used to help stay alert.
Lighters are a must-have to start a fire.
I also have a Ziploc bag containing about ten cotton balls soaked in petroleum jelly. They're great firestarters.
Cash. Keep various bills and coins in an amount that you think is suitable for emergencies.
Maps. Carry folding maps of your area, state, and surrounding states.
I think that covers everything that I have. There's a lot of redundancy, but it all fits in my bag, so I'm happy with it. I'm definitely interested in hearing thoughts as to what can be added or changed.
They make a low profile dust mask. I bought one and like it. I wish they made one even more lo pro. Here
you might give one of these a try:
https://www.amazon.com/Resp-O-Rator-Dust-Respirator-Model-JR-7/dp/B002KA0CMO
This dude puts one to pretty good use:
https://www.youtube.com/watch?v=-HDDLN5wSKQ
https://www.amazon.com/gp/product/B00V7UUNU4
I wear this pretty much from when I step into my workshop, till it's time to leave it. I saw a comment that with the right filter it'll do Hexavalent Chromium but, I'm not clear what the correct filter is. I'm not doing stainless yet.
Good news. Amazon has [these] (https://www.amazon.com/dp/B0009F5KDS/ref=cm_sw_r_other_apa_CnsbAbW6J9SEA) on Prime.
Well the mask du jour is what everybody calls the "N95". Basically a rating given by NIOSH to masks and respirators which filter 95% of particulate matter. It's not a trademark nor a brand. Most people go with the 3M ones though... because of a suspicion that certain nefarious types will seek to profit from this situation by selling counterfeit or non-certified masks as "N95". If you trust your local provider just go with whatever they stock.
I use this with these for keeping me safe from sawdust. I'll swap out with some organic vapor filters if I use any finishs or whatnot that requires it. This mask is very comfortable and I don't have a problem wearing it all day if I have to.
I honestly am not too educated on respirators. At work (a painting company) we had HEPA filters for when we were scraping and sanding, and then NIOSH filters for when we sprayed paint, but I bought a mask at lowes for personal use that had organic filters and .1 micron filtering, which for me meant I used the same filters for everything. If I'm painting I can't smell it, and when I sand wood I get no noticeable dust in the mask. Other than that I really don't know too much about respirators.
As far as I'm aware though, HEPA is particle filtering, and NIOSH is organic (activated carbon) filtering, so I'm thinking you would want either a NIOSH filter, or the combination thing lowes sells (the combo filters are more expensive, but worth it)
As a side note, they say you should replace the filters after 8 hours of use, but I've got probably 200 hours on the filters on my personal mask and its just starting to not fully filter the organic stuff.
i believe this is the one i have, with the R6001 organic vapor cartridges. i'm not an expert on the subject but it seems to do the trick and isn't too terrible to wear. though, if i'm painting out in the heat for a while it does tend to collect a lot of sweat in there. bout all i can tell ya
I looked around for information on nanoparticles and respirators, and I found this paper. Basically, it seems that current normal respirator ratings are pretty valid for use with nanoparticles. If you want the most protection you can get then, you'll want an NIOSH N100 or P100 rated respirator, which means it blocks 99.97% or higher of all particles. Something like this should work, plus it's not as obtrusive as a bigger mask. So if you feel like that's what you want to do, I'd recommend that mask or something similar.
I personally don't believe wearing a respirator to deal with "chemtrails" is reasonable, but I won't try to change your viewpoint. Hopefully I've helped.
https://www.amazon.com/3M-Comfort-Facepiece-Reusable-Respirator/dp/B00IF7RAP8/ + https://www.amazon.com/3M-Organic-Vapor-Cartridge-1-Pair/dp/B000XBKLLE/ + https://www.amazon.com/3M-5P71PB1-Particulate-Filter-10-Pack/dp/B0013Z0TV6/
Half Mask Respirator Size Small/Medium https://www.amazon.com/dp/B00V7UUNU4/ref=cm_sw_r_cp_apa_m328BbF9YCYYN.
I didn't see this post due to working, but I have two cats and I clean their litter boxes out. I went and got a respirator like this one: http://www.amazon.com/3M-62023HA1-A-Professional-Multi-Purpose-Respirator/dp/B002NMICB2/ref=sr_1_6?ie=UTF8&qid=1417134401&sr=8-6&keywords=respirator and I still clean out the boxes. A plus to this one, you don't SMELL anything at all! I also use a pair of designated rubber gloves (the kitchen cleaning kind). I've had family members freak out on me about but I'm the only one who is going to do it so TOUGH TITTIES!
Here you go!
Air will travel in the path of least resistance. The filters attached to a respirator provide a good bit of resistance, so a lot of air will get sucked in through the improper seal.
When wearing a respirator, you need to be able to block the filters with your hands, attempt to breathe in, and not be able to pull in any air. Otherwise your seal is bad.
For beards, you pretty much need a PAPR (Powered Air Purifying Respirator) if you have a big beard. If your beard is shorter you might be able to get by with smearing vaseline on your beard to create a seal with the standard respirator.
Another option is something goofy like this. It works like a snorkel, essentially. You could probably rig up some vapor filters on it. It isn't a foolproof option, but it's way cheaper than alternatives. Also you'd have to figure out something else for protecting your eyes.
I much prefer it over an exhaust that takes up valuable bench space. I use this respirator.
I can recommend a fenix LD20 , which can get pretty low on lumens for endurance (70 hrs @ 9 lumens). It is about the size of your E21 with similar function. I can also vouch for the 4sevens quark mini 123, which can go for 6 days on low mode (3 lumens) with one CR123A. This one is much smaller and easier to carry, but the twist bezel operation make one hand switching problematic.
Yes, opening the windows would be better. BUT get yourself a protective mask first like this one from 3M. You should be wearing this to protect your lungs. Spraying with an open window isn't going to prevent you from breathing some of the overspray from spray cans.
Also, as an alternative, you might want to just spray outdoors and avoid your apartment smelling like spray paint.
I've only used that a few times as compared to the north full face (second from the right.) Wearing one gets kinda old but it gets the smoke out. If I were you I'd buy this. The quick release is amazing and it is so much more comfortable than the standard one.
Don't waste your time with these;
http://www.amazon.com/gp/aw/d/B0002STR1I?pc_redir=1411126400&robot_redir=1
They do virtually nothing as they don't seal against the face effectively.
Far better to use something like this;
http://www.amazon.com/gp/aw/d/B0000DCBDQ?pc_redir=1411035882&robot_redir=1
Also, a lot of the better powered hand tools have a provision for attaching a vacuum to catch most of the dust generated.
I've been a pretty high-end restorative/decorative painter for 30 years, and aside from the quality of my work, I get praised for keeping dust under control.
If you can vent your workspace to the outside, that'll help too.
I use this one. It does a great job, but in my experience it helps if you are clean shaven. Throw some of these on it and you'll be hot to trot. I don't get any extra goggle fog than I do just wearing my goggles on their own.
VOC is a 'volatile organic compound'. Look up 3m half mask respirators. You want to purchase the pink filters like these.
https://www.amazon.com/3M-Organic-Cartridge-Respiratory-Protection/dp/B00BT2SWTE
Hope it helps. 3m has the exact info on their website.
[Here you go.] (https://www.amazon.com/Vktech-Industrial-Chemical-Anti-Dust-Respirator/dp/B00B1YP7U2/ref=sr_1_3?ie=UTF8&qid=1518699838&sr=8-3&keywords=gas+mask)
Please remember that a surgical mask protects people from YOUR germs; it does nothing to protect you from theirs. Get an N95 mask with a gasket (like this) and some wraparound glasses, and you should be okay. A respirator with activated charcoal filters would be even better, but are a hell of a fashion statement. :P This is one that's low-profile and has replaceable filters.
It might be worth it to pick up some of these before you get started.
I work in an apartment. I open the window , put a fan on blowing air out the window, and wear a respirator mask. Like the linked one below.
I also make sure my pet is in a different room with the door closed, until I feel like the room has been properly ventilated.
Just make sure you are using the right filters. You need one for metal fumes. The 2091 P100 Particulate Filters are suitable.
https://www.amazon.com/3M-Respirator-6191-Respiratory-Protection/dp/B008MCUVN4/ref=mp_s_a_1_4?keywords=3m+small+respirator+mask&qid=1565367931&s=gateway&sprefix=3m+small+res&sr=8-4
Exactly $25 is tough to hit, so I'm voting for this.. It is worth your $ to pony up $12 for this:
$37 4Sevens Quark Mini 123
Also since you didn't really mention any deficiencies in your carry, I think we kind of have to pick a replacement or we'll be suggesting something you don't need. As such, I suggest this knife:
$21 CRKT Peck
Mine stays in my pocket and I love it. Great money clip too, if you fold the bill properly (bill disappears behind clip).
$11 Sandisk Cruzer Blade
Face it. That flash drive you have is about to crash. It's old, you'll lose all your data, and you'll be pissed. This is a cheap, excellent replacement/upgrade.
$10 550 Paracord
Think of all the fun things you can do, and survival situations this will help you survive in. Yep. Buy 2 and a half.
$13 or Kelty Triptease is a fun alternative to paracord. Does not have same survival possibilities! Is way more fun.
***
I guess I'll go on and stop there. And I'm not sure upvotes will be helpful. Maybe you should specify one vote per reply. LOL
refinishing stuff is really good too. Oh yeah. Get a good mask. I use a http://www.amazon.com/3M-62023HA1-A-Professional-Multi-purpose-Respirator/dp/B002NMICB2/ It's amazing how much nicer woodworking can be with a good mask. Especially refinishing, with all that crappy finish stuff in the air.
Also recommend this gas mask as a cheap option. It's better than the scarves, but not super expensive like a true gas mask.
Pick up a pack of 3m N95 masks for when the smoke or dust gets bad. It helps a lot.
Again, I will urge everyone here not to listen to any statements that say you should not bring a mask.
Get these: http://www.amazon.com/3M-Disposable-Particulate-Respirator-Exhalation/dp/B001BXRRH4
And these: http://www.amazon.com/Trainman-Bandanas-Jumbo-27-Bandana/dp/B0081K92PK
Combine.
Even if you intend to be peaceful and even if you just carry it with you until needed. Additionally, bring extra bottles of water not for drinking.
I agree with cyclefreaksix that you'll likely have to spend a bit more than $20 to get a light with enough throw and power for what you're looking for. I personally have a Fenix E21, TK12, and a Xeno E03.
The E21 is a 2x AA light, slim, with a good feel in the hand. Decent mix of flood and throw. It's my go-to light for around the house work.
The TK12 is likely a bit more than you'd wan't to spend at $70, it's a very well built and very bright (compared to Maglites as well as my other two LED lights.) In this price range there is also the 4Sevens Quark 123^2 and AA^2. I use my TK12 in the theater or if I think I'll need more throw out at night.
The Xeno E03 is a 1xAA light, smaller in the hand, but still putting out a good number of OTF (Out The Front) lumens. In this size category there is also the Quark Mini 123 and Mini AA. I carry my E03 daily in my pocket. There are of course more options in all these categories.
Do you have a particular size or battery type you would prefer?
I don't know what you're using to cut with now but I find this setup a lot nicer than the abrasive cutoff saws I've used.
Just be mindful the steel demon blades have a lower RPM rating than most wood blades. They come in 7 in to 14 or 16 in diameter if I recall.
The cuts speak for themselves.
http://imgur.com/gallery/eoF0sKB
http://imgur.com/gallery/eIrdCnT
Heres the respirator I have
https://www.amazon.com/Miller-Electric-ML00895-Respirator-Single/dp/B00WIH1OVM/
Get yourself some lead test strips. and also get an actual respirator. Dust masks don't do shit to protect against lead.
Lead can fuck you up, protect yourself.
I picked up the "Breath Buddy" respirator mask off of Amazon and it fits my 9yr old with ta faceshield on, so I'm sure it would work for a teen. They're fully adjustable and work pretty well for dust and particulates.
https://www.amazon.com/Breath-Buddy-Respirator-Professional-Protection/dp/B01M67SJ0S/ref=sr_1_6?crid=3NRPZ8DMH97QF&keywords=respirator+mask&qid=1568799531&sprefix=respirator%2Ctools%2C209&sr=8-6
This is the respirator that I have and I love it (maybe more than I should). It's so comfortable that I can go a solid 6 hrs before I need to take it off. I do most of my work in a medium sized garage with poor ventilation (unless the door is open) and the difference in air quality it makes is rediculos. I could be hitting stuff with a grinder for a couple hours straight and the air smells just fine with the thing on, but as soon as I take it off, I would get a big face full of nasty air and put it back on, then open the garage door for a bit to air things out. I also use these filters for pretty much all of my dusty work. They're low profile and fit great under a face shield, but you'd probably need something different if you wanted protection from fumes.
Edit: these are the same filters at a better price
Saw a few with print, here's one.
Saw various plain ones.
I was considering buying a 3M 6500 since i've seen people wear some and they look kinda cool.
Here's a pack of filters that i'd use to pit 3 or 4 with each mask
This is my go to: 3M Particulate Respirator 8233, N100 https://www.amazon.com/dp/B008MCV43K?ref=yo_pop_ma_swf
Throw a bandana on over it. You can pull both down and back up pretty easily while not looking like you are cooking out of your basement.
Miller Welding makes a snug half mask, the Miller LPR-100, which easily fits within welding helmet. I was the only student in welding class who wore their mask every day. Everyone else bought bulky ones that kept hitting their helmets, soon to be left in welding bags. My LPR-100 never touched.
edit: it also comes in larger M/L size.
Scrape, you mean? Use a palette knife and just scrape off as much of the paint as you can, then sand off the rough bits with some fine grain sandpaper. Just make sure you do the sanding outside and with a mask on; a dust mask is better than nothing. If you used any paints with hazardous pigments like cadmiums, spend $20 and get yourself something better. Most paints and pigments are harmless, at least relatively so, but the ones that aren't you don't want to screw around with. If you're not sure, just check for warning labels on your paints.
Someone at my shop uses a thing called resp-o-rator. He likes it a lot.
Resp-O-Rator Dust Respirator Model JR-7 https://www.amazon.com/dp/B002KA0CMO/ref=cm_sw_r_cp_api_i_JfZZCb4XJCP02
That's a commercial respirator that he steampunked out. https://www.amazon.com/Resp-O-Rator-Dust-Respirator-Model-JR-7/dp/B002KA0CMO
I think he has a video about how he made it.
edit: yep https://www.youtube.com/watch?v=OvTVP68Md3Y
I'm actually making a "crisis kit" right now. I'm going to have an everyday pouch just for leaving the house, which will fit into a larger bag for home use or travel. I have some other issues, so a lot of this may not apply to you, but so far my everyday items are:
It's good to have everything in a single pouch so that you don't have to think logically through the pain about where a necessary item might be. It's also good to have smaller versions of things, like a small bag of bandages rather than the whole box, so that they will be reserved for emergency use only. That way, you can trust that everything you might need when you're feeling rough will be in a single place, not accidentally left out on your bedside table or in the hotel bathroom.
My larger kit will probably have comfy socks and leggings, an oversized scarf or sarong (you can sit on it, you can use it as a blanket, you can wear it...), an external battery, extra earbuds or cheap headphones because I would die if I didn't have a backup pair, pills, candy, a full pack of baby wipes, etc.
I hope that your trip goes wonderfully!
Is it the smell or the idea of having to clean it up?
If it's the smell, get some of these.
http://www.amazon.com/Safety-2985-Non-Toxic-Dust-Mask/dp/B0002STR1I
If it's the idea of cleaning poop, man up.
Was that a few years back? I read that 3M changed the lens color after 4C came out, but not sure of the exact dates.
Another thing, does the 3350 have enough room to wear a respirator under it? (Specifically this one) The Speedglas looks cramped, but it has special ventilation accessories that would cost a lot more.
I use the res-po-rator. It works like a scuba mouthpiece. https://www.amazon.com/Resp-O-Rator-Dust-Respirator-Model-JR-7/dp/B002KA0CMO
I use these, which go with this, so you can have hot pink AND talk like Bane. And, like, avoid cancer or silicosis or some shit.
I definitely recommend. Here is the one I have. It comes in three sizes (I have medium but wish I had gotten small). It makes the difference between sneezing a little and cancelling all my plans because I can't breathe.
Definitely get yourself a respirator. I use spray can and do it outside in the backyard and the fumes from Tamiya's lacquer spray cans got me light headed the first time I used it. Amazon has this respirator n'ere that works wonder for me.
3M Particulate Filter P100, 2 units per pack https://www.amazon.com/dp/B0009XYN7O/ref=cm_sw_r_cp_apa_i_rBDpDbZ9230NH
I use these cartridges 3M Multi Gas/Vapor Cartridge/Filter 60926, P100 Respiratory Protection
And I don’t smell the spray at all until I take the mask off.
Those cartridges go with this mask: This one
Only thing that I know of that works with a beard.
Resp-O-Rator Dust Respirator Model JR-7 https://www.amazon.com/dp/B002KA0CMO/ref=cm_sw_r_cp_api_q1AMxb7C163R5
I use a 3M half face mask that does a pretty good job keeping stuff out, even with an extended goatee. Might not work as well with a big bushy beard.
If you're really worried, you could go with the Resp-O-Rator but it looks kind of uncomfortable to me.
So, just to clarify - if I were to purchase one of these: http://www.amazon.com/dp/B008MCUULW/ref=biss_dp_t_asn, I would get this cartridge (http://www.amazon.com/3M-Filter-Adapter-2000-Series/dp/B003MOMTEG), and insert these filters inside (http://www.amazon.com/3M-R-2091-Particulate-Filter-4-Pack/dp/B0009XYN7O)?
Also - how long does a pair of filters last? How often do you replace them?
Do you wear the mask at all times in the shop? I won't have dust collection for quite some time, but the ~monthly leafblower to the garage workspace technique, along with frequent shop-vaccum use will probably be in my future.
Not sure why you're getting downvoted OP, over exposure to lead is no joke and being concerned about it doesn't make you any less of a man.
I've actually just been doing some research about this myself. I'm no expert but from what I gather, if you take some simple precautions you'll probably be good to go and don't really need to be concerned. If you still are, you can always get your blood lead level checked by your doctor for cheap.
They also make practice rounds that use lead-free primers (apparently the primers are the biggest source of lead exposure, not the bullet especially if it's jacketed). Check out PMC's eRange line for example. I decided against this -- for now -- because one I'm counting pennies and it was $50 more for 1K rounds, and my rifle rounds have lead primers anyways. Two, I wanted to do more research on what other possible health risks (if any) come from the alternative primer. Three, despite hearing good things about eRange, I read this about DDNP (the lead-free primer that most manufacturers use these days) and decided to hold off on purchasing 1K rounds of the stuff: https://wstiac.alionscience.com/pdf/WQV11N2_ART01.pdf
Some of the PDFs I found interesting during my research:
www.dtic.mil/cgi-bin/GetTRDoc?AD=ADA487506
www.hygenall.com/Skin_Absorption.pdf
http://www.researchgate.net/publication/239522749_Handwipe_method_for_removing_lead_from_skin/file/e0b4951c1b0eb5ee68.pdf
tl;dr; be concerned, take some simple precautions, but don't go crazy over it, and have fun shooting.
I looked into that mask, but it said it wouldn't get here for over a month. This respirator isn't that much more expensive, has good reviews for smoke, and will get here faster. It doesn't look badass like a full-on gas mask, but it should do the job.
Wear a respirator while doing any work. Not a dust mask, but an actual N100 rated respirator.
Sounds like a horrible idea, but for safety reasons, it's best to keep everything moist as you clean it, to cut down on dust. Use a 10% bleach solution to moisten areas before cleaning, scoop and sweep up all the shmoo and dispose of it.
The smell will go away over time once it's clean.
couldn't people have just worn these which filter out 99.97% of stuff in the air?
Yes, but this one that you linked does not include a set of filters, so you need to also buy welding rated filters. I do a lot of tig welding, so I grind tungsten regularly, and we are supplied with 2097 filters
The first mask I put is about 4k$. The half mask is fairly cheap, I don't know about the smaller one we don't have a lot of those. We use carbon filters since we are mostly dealing with aluminum oxide dust and fluoride gas. She would need painters filters. They get worn out due to use and the amount of dirt, not time. When I was working in the potroom 150 hours per month the filters lasted about 2 months, more for some, less for others. When you start to feel a real resistance breathing it's time to change them out.
The 3M half masks are designed to work with glasses and do so well, some cheaper brands might not.
The full mask does filter better since it is powered and has a huge filter, the smaller one and half don't have a measurable difference, we use the full mask for workers with a full beard. She should be fine with a half mask, the right filters and good ventilation.
You can use one of those little fans to blow the smoke away when soldering. They are pretty much useless for actually filtering the air; the carbon filter might remove some of the organics but it won't do anything to the smoke particles. They make better fume extractors (which start at about $800) that have actual HEPA filters in them. If you are working in a school lab and they don't have them, you could use PPE such as this:
https://www.amazon.com/Miller-Electric-ML00895-Respirator-Single/dp/B00WIH1OVM/
They make many different types, and I'm not too familiar with them, but mainly you need something that filters particles and organic fumes.
Im looking up 3M filters and I see some that are labeled “Organic Vapor Cartridge” https://www.amazon.com/dp/B00BT2SWTE/ref=cm_sw_r_cp_api_bPMYAbPPF5G0N
Would this work or should I just find charcoal ones?
https://www.amazon.com/3M-Particulate-Filter-Organic-Filters/dp/B079X5C3QP/ref=sr_1_3?ie=UTF8&qid=1542730788&sr=8-3&keywords=3M+2097+P100+filter
I like the 3M 2097 P100. 99.97% particulate filtering, as well as organic vapor relief (ie tear gas).
I own this mask and filter combo for smoke, bacteria/virus, and tear gas protection. I feel that these 3 things are the most likely use for a mask
https://www.amazon.com/dp/B00BT2SWTE/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B00BT2SWTE&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=21517efd-b385-405b-a405-9a37af61b5b4&pd_rd_wg=7mPKN&pf_rd_r=WH5EP7APXYAW8SBF5MKV&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=FZmmD&pf_rd_i=desktop-dp-sims&pd_rd_r=6650ebdc-e91e-11e8-a0b8-b3ecfb8dcc27
Which type of filter should I choose for wildfire?
Hey, any feedback on these ones? https://www.amazon.in/3M-9004-Particulate-Respirator-White/dp/B0146DETH6
I use a 3M N95when I go out and a P2 respirator mask around the house. The reusables are so much easier to breathe in and the air doesn’t get so hot or moist like it does in the disposable. I imagine the military grade n95 or higher are better than the disposable (and not as bulky as but I haven’t used them). P95+ makes is probably overkill unless you want to use it for aerosols, but always safe than sorry?
My reusable: Breath Buddy
I also use this for projects at home like spray painting, cleaning my cat’s litter box, or using heavy cleaning supplies. It’s great for blocking out odors where I can still smell odor with my disposable mask.
I run a 5k every few days in winter, it takes me ~ 30 mins with [this mask] (https://www.amazon.in/3M-9004-Particulate-Respirator-White/dp/B0146DETH6/). Once in a while I also use this one.
With the latter, which has an exhale valve, I couldn't run continuously with it, have the same issues of moisture + excessive perspiration + fog build up on glasses.
I'm curious as to how you managed to run with it continuously. Even with pacing, I found myself out of breath with both masks after a certain distance (1.5 km - 2 km).
This was last winter, and I ran for a few months (Oct - Jun), stopped wearing the masks around March.
have you seen these?
https://www.amazon.com/Half-Mask-Respirator-Small-Medium/dp/B00V7UUNU4
Is this resperator ok? Miller ML00895 Lpr-100 Respirator W/Filters, Medium/Large
Probably not the worst idea, given the high toxicity. But I will say, the mask did a good bit of the heavy lifting and they’re relatively cheap. if you don’t have one you like, Here’s the one I have: GVS SPR451 Elipse P100 Half Mask... https://www.amazon.com/dp/B013SIIBME?ref=yo_pop_ma_swf
In my experience, as long as you stay on top of your replacement filters, you won’t feel it in you chest later!
So would this pack of N95 Respirators be good for me to keep some in my car, at home, etc?
Also, now that you've taught me so much and I'm researching everything is there any advantage/disadvantage to having at least one of the P100 Respirators on hand?
What common things would a P100 be better for than an N95?
What things would you use your N95 on to prevent wasting your P100?
http://www.amazon.in/3M-Particulate-Respirator-9004-White/dp/B0146DETH6
Hello all,
What type of respirator should I use and which type of filter? I may have done something stupid since I had used a medium respirator two weeks ago (https://www.amazon.com/3M-Respirator-7501-Respiratory-Protection/dp/B008MCUS28/ref=sr_1_1?s=hi&ie=UTF8&qid=1503993009&sr=1-1-spons&keywords=respirator+mask&psc=1) and filter cartridges. However, the mask might have been a tiny bit too big for me as I smelled the fumes a bit a few times (about three times) when I moved my head around - I used Mr. hobby thinner and Mr. Surfacer. Other than that, it was secure.
I since have gotten a small size one, which fits my face better. However, what was stupid is that I have gotten light headed after an hour in. I may have continued for 10 minutes till it gotten worse and stopped. A major headache lasted till a day though a smaller headache and sharp pains lasted till maybe today (9 days in). Hopefully, whatever I damaged heals (I have my annual check up in mid-September), but I am scared.
The filters I used was organic vapor cartridges. I think next time I should use the particulate filters with plastic holders.
That respirator is great, using it myself. As for filters, they are marked differently depending on where you live:
North America: OV/P100, 3M product number 60921
Europe: Filters marked A2P3. For 3M it means combining 2 filters - 6055 and 5935.
Not sure how they're marked in other parts of the world.
There are masks you can buy, the filters however have to be replaced often and they can be quite expensive, but if you plan on staying in Jerusalem, then I guess you have no other choice.
https://www.amazon.com/3M-Disposable-Particulate-Respirator-Exhalation/dp/B001BXRRH4
This one is relatively cheap and is a p100 mask, meaning it should filter at least 99.97% of airborne particles to be certified as such. You may need to adjust it though so that it fits properly, any mask will be useless if the fit is not correct for your face.
https://www.amazon.ca/3M-2097-Particulate-Filter/dp/B00328IAO0/ref=pd_lpo_vtph_328_bs_lp_t_1?_encoding=UTF8&psc=1&refRID=518B5SNTGTSPTRE1KCPE
These are the filters for the mask.
Amazon has a spray booth for about 80 bucks that is very compact when put away. This is enough for most people but if you want to be extra careful, use a respirator.
They already make these, Respro, and from tests I read they don't work well. I use this, a real respirator with a small form factor. It's made by a welding company to fit under a helmet.
http://www.amazon.com/Miller-Electric-2240377-Half-Respirator/dp/B00V7UUNU4
Gas masks are not really difficult to get a hold of either. I wouldn't be surprised if a medical 95% filtered mask would dramatically reduce its effectiveness.
https://www.amazon.com/3M-8210PPB1-Particulate-Respirator-20-Pack/dp/B002AUVWSC/ref=pd_sim_469_3?_encoding=UTF8&pd_rd_i=B002AUVWSC&pd_rd_r=P5NR2SJRYB5CKT1WX6XD&pd_rd_w=TXHUP&pd_rd_wg=wyghz&psc=1&refRID=P5NR2SJRYB5CKT1WX6XD
Less than a dollar per mask.
But any surplus military store would likely have gas masks. Any hardware store would also have some pretty serious masks.
Found it! Thank you very much.
Like any safety gear:
This is what I use, but I also use it for sanding bondo, painting (with different filters) and working with cutting/grinding G10 and fiberglass which is way nastier than wood.
If you don't want to bother with a full respirator, the P100 is a good doctor-type cloth mask
If you really look into it and are the paranoid type though, you'll realize your chance of trapping any of the 30nm and smaller dust particles are basically 0, which can be a problem because they're the ones that get deep into the lung tissue. But anything like the above will work fine for trapping the bigger stuff. People spend thousands of dollars on systems to trap or get rid of the smaller particles, but unless you're a serious hobbyist, ie: exposed for many hours a day, it's overkill. Source: Working on a dust collection system for my grinder with exterior vents and basic filtration. It's a pain in the dick.
Best way to minimize the risk? Do it outside. Dilution is the solution for pollution. This isn't a post to scare people so much as remind them that literally everything can be hazardous in some way. Just take regular precautions to minimize the risk and enjoy what you're doing.
I think you should up to disposable P100s at a minimum, but IDK... not my lungs.
Bifen XTS Bifenthrin Concentrate 1 Quart https://www.amazon.com/dp/B007SI74GA/ref=cm_sw_r_cp_api_i_CCAUDbCHKBS84
You’ll also need a garden sprayer
Chapin 20002, 2 Gallon Lawn, Garden and Multi-Purpose Sprayer with Adjustable Nozzle, Translucent White https://www.amazon.com/dp/B0039EEN0M/ref=cm_sw_r_cp_api_i_qDAUDbYZ169P3
Also, it’s not a bad idea to get a respirator, this stuff is strong. I picked mine up from harbor freight but here is a link to a similar one.
Breath Buddy Respirator Mask (Plus Safety Glasses) Reusable Professional Breathing Protection Against Dust, Pollen, Pesticides, and Organic Vapors - Perfect For Painters and DIY Projects https://www.amazon.com/dp/B01M67SJ0S/ref=cm_sw_r_cp_api_i_-EAUDbF7988H6
I was worried about kitchen style so I was thinking maybe get the goggles that have animal ears on them to help retain manliness? I like giraffes anyway so it wouldn't hurt.
Would i have to get goggles that cover the nose as well? I'm not sure if onion gases can penetrate thru the nose or not
Edit: these seem like a winner (Bonus boob in URL)
http://www.amazon.com/dp/B00B1YP7U2/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Disposable and protects you from shit. Including Ebola! http://www.amazon.com/3M-Dust-Respirators-8210-20-Pack/dp/B002AUVWSC
What are the preferred commercial models? I have a couple off-the-shelf 3M respirators from the hardware store with replaceable filters that I use primarily for spraying pesticides (https://smile.amazon.com/gp/product/B002NMICB2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) but am curious what would be necessary for a proper prep mask.
Agreed on all points, but I'd recommend the 7501 (http://www.amazon.com/gp/product/B008MCUS28) over the 6000 series since it has a silicone piece that interfaces with your face instead of harder plastic.
I went for this one, but haven't tried it yet (hasn't arrived)
https://smile.amazon.com/gp/product/B008MCUS28/
https://smile.amazon.com/gp/product/B079X5C3QP/
N95 and N100 masks are appropriate for fire/smoke particulates but not for gasses or carbon monoxide/dioxide. They are also only good for about 8 hours of heavy usage before they need to be replaced.
I walk a lot, so I picked up a couple of these when the air quality was creeping up on 200 the other day during the worst of it. Didn't end up needing them, but keeping them on hand since these burns are a yearly occurrence.
https://www.amazon.com/gp/product/B008MCV43K
This is also nice to have bookmarked (air quality map with multiple sensors):
https://www.purpleair.com/map#12.29/34.07144/-118.3271
I have been using this one for several years if I'm doing yard work or dusty house maintenance. It seems ok I guess. https://www.amazon.com/gp/product/B013SIIBME
http://www.amazon.in/gp/aw/d/B0146DETH6/ref=pd_aw_sbs_328_1?ie=UTF8&psc=1&refRID=0TCZK9X55AQHC6P031CB
Ab tu muh me kaise lega?
eh, i'd recommend this instead https://www.amazon.com/gp/product/B00WIH1OVM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
same n95 qualities, but it allows more air OUT (instead of pushed back into your face) due to a smart flap, and unlike the paper masks, it actually SEALS comfortably to your face
I totally agree! I only just started turning this month and within the first week my nose started bleeding like crazy from all the sawdust. I just bought the GVS Elipse from Amazon for $20 and I am soooo thankful I did. With that and the Honeywell face shield for another $20, I can turn all day without any issues. It feels like I'm breathing in clean cool air. It's awesome. VERY MUCH recommended.
Yeah, it should be ventilated outside. I have kind of a lame home-made booth, but it vents outside and I open all the windows nearby when I use it. I also picked up a NIOSH-certified respirator so I can go all Breaking Bad when I paint my tanks. They're about 35 bucks (including a set of filters) and are probably worthwhile if you aren't able to ventilate the area very well. Something like this:
http://www.amazon.com/gp/product/B0009F5KDS
But, yes. Brain damage, breathing problems, death. Probably a quick dirty buzz along the way, too, since you're basically huffing paint. Yum.
Agree the respirators are your best bet, but I personally find them really uncomfortable and sweat a lot in them. I like these masks for dust protection while woodworking - they have a gasket on the back to form a tight seal and are pretty comfortable IMO. Then use the respirator for painting / finishing to protect against vapors.
Last year our whole group had face mask/buffs and we were still suffering, so this year we got these masks . They might be a little over the top but we don't want to suffer. They have good reviews. Even a few people say they worked well for burningman. We don't plan on wearing them the whole time but only when it gets bad, but it does get bad.